1. Product profile
1.1 General description
NPN/NPN Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD)
plastic packages.
1.2 Features and benefits
1.3 Applications
Low current peripheral driver
Control of IC inputs
Replaces general-purpose transistors in digital applications
1.4 Quick reference data
PEMH10; PUMH10
NPN/NPN resistor-equipped transistors;
R1 = 2.2 k, R2 = 47k
Rev. 3 — 20 December 2011 Product data sheet
Table 1. Product overview
Type number Package NPN/PNP
complement PNP/PNP
complement Package
configuration
NXP JEITA
PEMH10 SOT666 - PEMD10 PEMB10 ultra small and flat lead
PUMH10 SOT363 SC-88 PUMD10 PUMB10 very small
100 mA output current capability Reduces component count
Built-in bias resistors Reduces pick and place costs
Simplifies circuit design AEC-Q101 qualified
Table 2. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
Per transis tor
VCEO collector-emitter voltage open base - - 50 V
IOoutput current - - 100 mA
R1 bias resistor 1 (input) 1.54 2.20 2.86 k
R2/R1 bias resistor ratio 17 21 26
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 2 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
2. Pinning information
3. Ordering information
4. Marking
[1] * = placeholder for manufacturing site code.
Table 3. Pinning
Pin Description Simplified outline Graphic symbol
1 GND (emitter) TR1
2 input (base) TR1
3 output (collector) TR2
4 GND (emitter) TR2
5 input (base) TR2
6 output (collector) TR1
001aab555
6 45
1 32
65 4
123
R2
TR1 TR2
R1
R2 R1
sym063
Table 4. Orderin g information
Type number Package
Name Description Version
PEMH10 - plastic surface-mounted package; 6 leads SOT666
PUMH10 SC-88 plastic surface-mounted package; 6 leads SOT363
Table 5. Marking codes
Type number Marking code[1]
PEMH10 10
PUMH10 H*0
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 3 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Per transis tor
VCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 5 V
VIinput voltage
positive - +12 V
negative - 5V
IOoutput current - 100 mA
ICM peak collector current - 100 mA
Ptot total power dissipation Tamb 25 C[1]
PEMH10 (SOT666) [2] -200mW
PUMH10 (SOT363) - 200 mW
Per device
Ptot total power dissipation Tamb 25 C[1]
PEMH10 (SOT666) [2] -300mW
PUMH10 (SOT363) - 300 mW
Tjjunction temperature - 150 C
Tamb ambient temperature 65 +150 C
Tstg storage temperature 65 +150 C
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 4 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.
SOT363 and SOT666; FR4 PCB, standard footprint
Fig 1. Per device: Power derating curve
Tamb (°C)
-75 17512525 75-25
006aac749
200
100
300
400
Ptot
(mW)
0
Table 7. Thermal characteris tics
Symbol Parameter Conditions Min Typ Max Unit
Per transis tor
Rth(j-a) thermal resistance from
junction to ambient in free air [1]
PEMH10 (SOT666) [2] --625K/W
PUMH10 (SOT363) - - 625 K/W
Per device
Rth(j-a) thermal resistance from
junction to ambient in free air [1]
PEMH10 (SOT666) [2] --417K/W
PUMH10 (SOT363) - - 417 K/W
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 5 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
FR4 PCB, standard footprint
Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for
PEMH10 (SOT666); typical values
FR4 PCB, standard footprint
Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration for
PUMH10 (SOT363); typical values
006aac751
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33 0.2
0.1
0.05
0.02 0.01
0
006aac750
10-5 1010-2
10-4 102
10-1 tp (s)
10-3 103
1
102
10
103
Zth(j-a)
(K/W)
1
duty cycle = 1
0.75 0.5
0.33
0.2
0.1 0.05
0.02 0.01
0
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 6 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
7. Characteristics
[1] Characteristics of built-in transistor.
Table 8. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Per transis tor
ICBO collector-base
cut-off current VCB =50V; I
E= 0 A - - 100 nA
ICEO collector-emitter
cut-off current VCE =30V; I
B= 0 A - - 100 nA
VCE =30V; I
B=0A;
Tj= 150 C--5A
IEBO emitter-base
cut-off current VEB =5V; I
C= 0 A - - 180 A
hFE DC current gain VCE =5V; I
C= 10 mA 100 - -
VCEsat collector-emitter
saturation voltage IC=5mA; I
B= 0.25 mA - - 100 mV
VI(off) off-state input
voltage VCE =5V; I
C=100A-0.60.5V
VI(on) on-state input
voltage VCE = 0.3 V; IC=5mA 1.1 0.75 - V
R1 bias resistor 1 (inp u t) 1.54 2.20 2.86 k
R2/R1 bias resistor ratio 17 21 26
Cccollector capacitance VCB =10V; I
E=i
e=0A;
f=1MHz --2.5pF
fTtransition frequency VCB =5V; I
C=10mA;
f = 100 MHz [1] - 230 - MHz
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 7 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
VCE =5V
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =40 C
IC/IB=20
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =40 C
Fig 4. DC current gain as a function of collector
current; typical values Fig 5. Collector- emitter saturatio n voltage as a
function of collector current; typical values
VCE =0.3V
(1) Tamb =40 C
(2) Tamb =25C
(3) Tamb = 100 C
VCE =5V
(1) Tamb =40 C
(2) Tamb =25C
(3) Tamb = 100 C
Fig 6. On-state input voltage as a function of
collector current; typical valu es Fig 7. Off-state input voltage as a function of
collector current; typical values
IC (mA)
10-1 102
101
006aac805
102
10
103
hFE
1
(1)
(2)
(3)
006aac810
IC (mA)
10-1 102
101
10-1
1
VCEsat
(V)
10-2
(1)
(2)
(3)
006aac811
IC (mA)
10-1 102
101
1
10
VI(on)
(V)
10-1
(1)
(2)
(3)
006aac812
IC (mA)
10-1 101
1
VI(off)
(V)
10-1
(1)
(2)
(3)
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 8 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
f = 1 MHz; Tamb =25CV
CE =5V; T
amb =25C
Fig 8. Collector capacitance as a function of
collector-base voltage; typical values Fig 9. Transition frequency as a function of collector
current; typical values of built-in transistor
VCB (V)
0504020 3010
006aac813
1
2
3
Cc
(pF)
0
006aac757
IC (mA)
10-1 102
101
102
103
fT
(MHz)
10
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 9 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
9. Package outline
Fig 10. Package outline PEMH10 (SOT666)
Fig 11. Package outline PUMH10 (SOT363/SC-88)
Dimensions in mm 04-11-08
1.7
1.5
1.7
1.5
1.3
1.1
1
0.18
0.08
0.27
0.17
0.5
pin 1 index
123
456
0.6
0.5
0.3
0.1
06-03-16Dimensions in mm
0.25
0.10
0.3
0.2
pin 1
index
1.3
0.65
2.2
2.0 1.35
1.15
2.2
1.8 1.1
0.8
0.45
0.15
132
465
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 10 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
[2] T1: normal taping
[3] T2: reverse taping
11. Soldering
Table 9. Packing methods
The indicated -xxx are the last thre e digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
3000 4000 8000 10000
PEMH10 SOT666 2 mm pitch, 8 mm tape and reel - - -315 -
4 mm pitch, 8 mm tape and reel - -115 - -
PUMH10 SOT363 4 mm pitch, 8 mm tape and reel; T1 [2] -115 - - -135
4 mm pitch, 8 mm tape and reel; T2 [3] -125 - - -165
Reflow soldering is the only recommended soldering method.
Fig 12. Reflow soldering footprint PEMH10 (SOT666)
solder lands
placement area
occupied area
solder paste
sot666_fr
2.75
2.45
2.1
1.6
0.4
(6×)
0.55
(2×)
0.25
(2×)
0.6
(2×)
0.65
(2×)
0.3
(2×)
0.325
(4×)
0.45
(4×)
0.5
(4×)
0.375
(4×)
1.72
1.7
1.0750.538
Dimensions in mm
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 11 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
Fig 13. Reflow soldering footprint PUMH10 (SOT363/SC-88)
Fig 14. Wave soldering footprint PUMH10 (SOT363/SC-88)
solder lands
solder resist
occupied area
solder paste
sot363_fr
2.65
2.35 0.4 (2×)
0.6
(2×)
0.5
(4×)
0.5
(4×)
0.6
(4×)
0.6
(4×)
1.5
1.8
Dimensions in mm
sot363_fw
solder lands
solder resist
occupied area
preferred transport
direction during soldering
5.3
1.3 1.3
1.5
0.3
1.5
4.5
2.45
2.5
Dimensions in mm
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 12 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
12. Revision history
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PEMH10_ PUMH10 v.3 20111220 Product data sheet - PEMH10_ PUMH10 v.2
Modifications: The format of this document has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
Legal texts have been adapted to the new company name where appropriate.
Section 1 “Product profile: updated
Section 4 “Marking: updated
Table 7 “Thermal characteristics: updated according to the latest measurements
Table 8 “Characteristics: ICEO upd ated according to the latest measurements, fT added,
Vi(off) redefined to VI(off) off-state input voltage, Vi(on) redefined to VI(on) on-state input
voltage.
Figure 1 to 9: added
Section 8 “Test information: added
Figure 10 and 11: replaced by minimized package outline drawings
Section 10 “Packing information: added
Section 11 “Soldering: added
Section 13 “Legal information: updated
PEMH10_ PUMH10 v.2 20031020 Product data sheet - PEMH10 v.1
PUMH10 v.1
PEMH10 v.1 20011022 Preliminary specification - -
PUMH10 v.1 20000801 Product specification -
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 13 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short dat a sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre vail.
Product specificatio nThe information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to off er functions and qualities beyond those descri bed in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Se miconductors takes no
responsibility for the content in this document if provided by an inf ormation
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggreg ate and cumulative li ability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and with out
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applicat ions where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconducto rs products in such equipment or
applications and ther efore such inclu sion and/or use is at the cu stomer’s own
risk.
Applications — Applications that are described herein for any of these
products are for il lustrative purposes only. NXP Semiconductors makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using NXP Semiconductors product s, and NXP Semiconductors
accepts no liability for any assistance with applications or cu stomer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suit able and fit for the custome r’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for th e customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Not hing in this document may be interpret ed or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyri ghts, patent s or
other industrial or intellectual property rights.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contain s data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
PEMH10_PUMH10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 3 — 20 December 2011 14 of 15
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All refe renced brands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors PEMH10; PUMH10
NPN/NPN resistor-equipped transistors; R1 = 2.2 k, R2 = 47k
© NXP B.V. 2011. All rights reserved.
For more information, please visit: http://www.nxp.co m
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 20 December 2011
Document identifier: PEMH10_PUMH10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 4
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 6
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 8
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 8
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
10 Packing information . . . . . . . . . . . . . . . . . . . . 10
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14 Contact information. . . . . . . . . . . . . . . . . . . . . 14
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15