Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England mailto:sales@isocom.uk.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055 Circuit Features Description Absolute Maximum Ratings Electrical Characteristics Similar Optocouplers Home Page IS110, IS113 OPTICALLY COUPLED ISOLATORS Circuit Features 10 kV Electrical Rating. Phototransistor or Photodarlington Output Option. Low Cost Plastic Module. Designed to meet VDE Standards Designed for UL recognition: file No E58730 (note 6). Description The IS110 and IS113 are optically coupled isolators each containing a Gallium Arsenide infrared emitting diode and an NPN silicon phototransistor (IS110) or photodarlington (IS113) sealed in a precast opaque epoxy housing. All electrical parameters are 100% tested. Specifications are guaranteed to a cumulative 0.65% AQL. APPLICATIONS Designed for applications requiring high voltage isolation between input and output Absolute Maximum Ratings (Ta=25C) Input-to-Output Isolation Voltage: 10kVdc (note 1) Storage Temperature: -40C to +80C Operating Temperature: -40C to +85C Lead Soldering: 240C for 5s, 1.6mm from case (note 2) Input Diode Forward DC Current: Reverse DC Voltage: Power Dissipation: 40mA (note 3) 3V 50mW (note 4) Output Phototransistor Collector-Emitter Voltage: Emitter-Collector Voltage: Power Dissipation: 32V 5V 100mW (note 5) Electro-optical Characteristics (Ta=25C) INPUT DIODE PARAMETER CONDITIONS MIN TYP MAX UNIT Forward Voltage VF IR IF=20mA 1.5 V IS113 IF=10mA 1.5 V IS110 Reverse Current VR=3V 100 A Output Phototransistor V (BR) CEO V(BR) ECO Collector-Emitter IS110 IC=1mA Breakdown Voltage IS113 Emitter-Collector IS110 IE=100A Breakdown Voltage IS113 ICEO Collector-Emitter Dark Current VCE=10V, IF=0 COUPLED PARAMETER 30 V 25 V 5 V 5 V 100 nA CONDITIONS MIN TYP MAX UNIT IF=16mA, VCE=5V 12.5 25 % 50 % 10 kVdc DC Current Transfer Ratio IC/IF IS110 IS113 IF=16mA, VCE=2V VISO Isolation Voltage (Note 1) Collector-Emitter IS110 IF=16mA, IC=1.8mA 0.4 V Saturation Voltage IS113 IF=16mA, IC=5mA 1.2 V TR Output Rise Time IS110 IC=2mA, VCC=10V, 2 s TF Output Fall Time RL=100ohm See Test Circuit 2 s TR Output Rise Time IS113 IC=1mA, VCC=10V, 40 s TF Output Fall Time RL=100ohm See Test Circuit 40 s VCE(SAT) Notes 1. Measured with input diode leads shorted together and output leads shorted together 2. RMA flux is recommended. Duration can be extended to 10s max. when flow soldering. 3. Derate linearly 0.73mA/C above 25C. 4. Derate linearly 0.91mW/C above 25C. 5. Derate linearly 1.82mW/C above 25C. 6. UL recognition is for 3500V AC, 1 minute, only. Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date. Contents