To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
RGF1A - RGF1M — Fast Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
RGF1A - RGF1M Rev. 2.5
July 2016
RGF1A - RGF1M
Fast Rectifiers
Features
• Glass Passivated Junction
• For Surface Mounted Application
• Low Forward Voltage Drop
• High Current Capability
• Easy Pick and Place
• High Surge Current Capability
Ordering Information
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Part Number Top Mark Package Packing Method
RGF1A RGF1A DO-214AC (SMA) Tape and Reel
RGF1B RGF1B DO-214AC (SMA) Tape and Reel
RGF1D RGF1D DO-214AC (SMA) Tape and Reel
RGF1G RGF1G DO-214AC (SMA) Tape and Reel
RGF1J RGF1J DO-214AC (SMA) Tape and Reel
RGF1K RGF1K DO-214AC (SMA) Tape and Reel
RGF1M RGF1M DO-214AC (SMA) Tape and Reel
Symbol Parameter Value Unit
RGF1
ARGF1
BRGF1
DRGF1
GRGF1
JRGF1
KRGF1
M
VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
IF(AV) Average Rectified Forward Current
at TL = 125C1.0 A
IFSM
Non-Repetitive Peak Forward Surge
Current: 8.3 ms Single Half-Sine
Wave 30 A
TSTG Storage Temperature Range -65 to +175 C
TJOperating Junction Te mperature -65 to +175 C
SMA/DO-214AC
COLOR BAND DENOTES CATHODE
RGF1A - RGF1M — Fast Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
RGF1A - RGF1M Rev. 2.5 2
Thermal Characteristics
Values are at TA = 25°C unless otherwise noted.
Note:
1. Device moun ted on FR-4 PCB 0.013 mm.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol Parameter Value Unit
PDPower Dissipation 1.76 W
RJA Thermal Resistance, Junction-to-Ambient(1) 85 C/W
RJL Thermal Resistance, Junction-to-Lead(1) 28 C/W
Symbol Parameter Conditions Value Unit
RGF1
ARGF1
BRGF1
DRGF1
GRGF1
JRGF1
KRGF1
M
VFForward Voltage IF = 1.0 A 1.3 V
trr Reverse Recovery
Time IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A 150 250 500 ns
IRReverse Current
at Rated VR
TA = 25C5.0
A
TA = 125C 100
CTTotal Capacitance VR = 4.0 V,
f = 1.0 MHz 8.5 pF
RGF1A - RGF1M — Fast Rectifiers
© 2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
RGF1A - RGF1M Rev. 2.5 3
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current
Figure 3. Foward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage
Figure 5. Total Capacitance
0 25 50 75 100 125 150 175
0
0.25
0.5
0.75
1
1.25
Ambient Temperature [ºC]
Average Rectified Forward Current, IF [A]
RESISTIVE OR
INDUCTIVE LOAD
P. C. B . M O UN T E D
ON 0.2 x 0.2"
(5.0 x 5.0 mm)
COPPER PAD AREAS
12 51020 50100
0
10
20
30
40
50
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
0.01
0.1
1
10
20
Forward Voltage, VF [V]
Forward Current, IF [A]
Pulse Width = 300µ
µµ
µs
2% Duty Cycle
T = 25 C
º
A
T = 125 C
º
A
0 20406080100120140
0.01
0.1
1
10
30
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [XA]
T = 25 C
º
A
T = 100 C
º
A
T = 150 C
º
A
12 51020 50100
1
2
5
10
20
50
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
2.65
4.30
1.75
2.50 MAX
2.20
1.90
0.30
0.05
B
0.203
0.050
2.05
1.95
A
C
B
1.65
1.20 2.95
2.50
B
5.60
4.80
B
4.75
4.00
A
B
0.41
0.15
1.52
0.75
R0.15 4X
8°
0°
0.45
8°
0°
DETAIL A
SCALE 20 : 1
GAGE PLANE
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
B
DOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5-2009.
E. LAND PATTERN STD. DIOM5025X231M
F. DRAWING FILENAME: MKT-DO214ACrev2
LAND PATTERN RECOMMENDATION
TOP VIEW
SIDE VIEW
0.13
M
C
B A
0.13
M
C
B A
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
