TECHNICAL DATA SHEET STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION 1/6 R197.160.K18 Series : SMB CARLOCK All dimensions are in mm. . pn . ao COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS - HOUSING PLATING (m) MATERIALS ZINC ALLOY BRASS PTFE - PA 4.6 30%GF TIN FOR HIGH TEMPERATURE GOLD 0.5 OVER NICKEL 2 - UL CLASSIFICATION - COLOR UL 94 V2 CURRY RAL 1027 * According to FAKRA specification Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET R197.160.K18 STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION PACKAGING Standard 350 Unit 2/6 Series : SMB CARLOCK SPECIFICATION Other Contact us SN 55228-2** ELECTRICAL CHARACTERISTICS ENVIRONMENTAL Impedance Operating temperature -40/+110 C 50 Frequency Hermetic seal 0-4 GHz NA Atm.cm3/s VSWR Panel leakage 1.06* + 0,0130 x F(GHz) Maxi NA Insertion loss 0.03 F(GHz) dB Maxi - F(GHz)) dB Maxi RF leakage -( Voltage rating 335 Veff Maxi Dielectric withstanding voltage 1000 Veff mini Insulation resistance 1000 M mini OTHER CHARACTERISTICS Assembly instruction Others : MECHANICAL CHARACTERISTICS Center contact retention Axial force - Mating end Axial force - Opposite end Torque 10 N mini 10 N mini NA N.cm mini Recommended torque Mating Panel nut NA N.cm NA N.cm Mating life Weight *COAX TRANSMISSION LINE ONLY **Complaint except that 2D label does not include the shipping note number. 50 Cycles mini 2,2372 g **WARNING!** Terms of use and storage: The product must be used as soon as it is removed from the cells. Do not leave the product in the open air. The reels should be stored indoors, in it's original packaging, in a controlled climate environment not exceeding -20C / +40C and 60% Max. relative humidity Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION 3/6 R197.160.K18 Series : SMB CARLOCK MOUNTING ZONE FOR RECEPTACLE Thickness of PCB: 1,6 mm. Material of PCB: FR4 (r = 4.6). Solder paste has to be printed onto the land of solder and into holes to permit Pin In Hole Reflow Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET 4/6 R197.160.K18 STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION Series : SMB CARLOCK SOLDER PROCEDURE 1. Deposition of solder paste `Sn Ag4 Cu0.5' on mounting zone by screen printing application. We recommend a low residue flux. We advise a thickness of 0.2 millimetres min. ( 0.008 inch min. ). Verify that the edges of the zone are clean. 2. Placement of the receptacle on the mounting zone with an automatic machine of `pick and place' type. Video camera is recommended for the positioning of the component. Adhesive agents must not be used on the receptacle. 3. Soldering by infra-red reflow. Below, please find the typical profile to use. 4. Cleaning of printed circuit boards. 5. Checking of solder joints and position of the component by visual inspection. TEMPERATURE PROFILE Parameter Temperature rising Area Max Peak Temperature Max dwell time @260C Min dwell time @235C Max dwell time @235C Temperature drop in cooling Area Max dwell time above 100C Value 1 -4 260 10 20 60 -1 to - 4 420 Unit C/sec C sec sec sec C/sec sec Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION 5/6 R197.160.K18 Series : SMB CARLOCK REEL PACKAGING PER 350 Label for identification : CELL MATERIAL : Polycarbonate COVER TAPE MATERIAL : conductive polyester film tape Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET STRAIGHT PCB RECEPTACLE EDGE CARD - PIN IN PASTE VERSION 6/6 R197.160.K18 Series : SMB CARLOCK To obtain other coding for the connector please change the letter by the needed coding letter into the Part Number Issue : 1244 D In the effort to improve our products, we reserve the right to make changes judged to be necessary.