Model 580 NEW Commercial Potentiometers Electrical RESISTANCE RANGE: 200 to 2.5 meg - Linear 1.0K to 1.0 meg - Non-linear RESISTANCE TOLERANCE: 20% standard LINEARITY: 5% Independent (through 100K ) POWER RATING: Bushing Mount 0.10 Watt @ 40C- Linear Taper 0.05 Watt @ 40C- Non-Linear PC Mount 0.05 Watt @ 40C Derate to 0 Watt @ 100C FEATURES: * Conductive Plastic Element * Smooth Feel * High Rotational Life * Quiet Electrical Output * Robust Construction MINIMUM RESISTANCE: 10 Max. Each End- Linear 10 Max. Low End, 1% High End- Non-Linear MAXIMUM CONTINUOUS WORKING VOLTAGE: 100 VAC CONSTRUCTION: Mounting- Bushing PC Locating Pin- @ 6 o'clock No pin, optional Not sealed for washing TERMINALS: Number- 3 in Line Type- PC Pins on 0.100" Grid Standard Strength- 2 lb Push & Pull MECHANICAL ROTATION: 295 5 TORQUE: Operating- 0.2 to 2.5 oz. in. @ 25C, 0.5 oz. in. Variation in a Control Stop- 3 in. lbs. Marking Ink Stamp on Periphery or Rear per EIA Standard Environmental DIELECTRIC WITHSTANDING VOLTAGE: Sea Level- 300 VAC STORAGE TEMPERATURE: -40C to +100C DYNAMIC NOISE (CRV): 2% of Rt Standard Linear TEMPERATURE CYCLING: -40C to +100C (5 cycles, 4 % Rt) Mechanical MATERIALS OF CONSTRUCTION: Housing- Molded Thermoplastic Shaft- Metal Wiper- Metal Contact Spring Bushing- Metal ISO 9001 CERTIFIED 800 874 1874 * Clarostat Sensors and Controls * El Paso, Texas 79936 LOAD LIFE: 1000 hrs. Rated Load @ 40C (10% Rt) ROTATIONAL LOAD LIFE: 40,000 cycles (10% Rt) DIMENSIONS SHAFT SHOWN IN FULL CCW POSITION 60 12.00 (5.00,7.00, 10.00 Options 7.26 9.500.3 12.00 (5.00,7.00, 10.00 Options 9.40 o4.00 1.00 6.500.3 .25 1.00 1.00 M7 X .75 M7 X .75 3.75 .80 .80 2.5 0.90 2.00 FMS .80 .800 2.50 SINGLE UNIT 2.50 o4.00 1.00 4.750.3 1 2 DUAL UNIT 2.50 FMS 3 5.00 5.00 5.00 5.00 11.00 17.00 7.00 All dimensions are metric. End view is the same for all styles. Other combinations are available, including, custom cables, mountings, value-add options and subassemblies. Model 580 and other Clarostat commercial potentiometers replace competitive models by Alps, Panasonic, Taiwan Alpha and others. Call 800-874-1874 for details. o4.00 1.00 1.00 M7 X .750 .800 .800 2.50 2.50 QUAD UNIT 2.50 FMS Ask about other stock and custom Clarostat position sensing solutions, including commercial and industrial variable resistors, digitaloutput optical and mechanical encoders, custom position sensing elements, specialty trimmers and fixed resistors. 5.00 5.00 5.00 CONSTRUCTION FEATURES: * Single Shafts: Single unit, Dual unit (one or two elements), Quad unit or Octo unit * Concentric Shafts: Dual unit Quad unit Outer drives sections 3 & 4 Inner drives sections 1 & 2 * Shaft Lengths up to 35mm Shaft Ends - Plain Rounded - Flatted - Slotted - Knurled, 18 Teeth Shaft Diameters - 3mm to 6mm Bushing - M7 X .75; 5, 7 & 10mm long * Detents - Center - Other Detents, consult factory * Mounting Height, PC Board to Shaft Center - 6.5mm Standard - 12.5mm optional * Mounting Support Brackets"B" Style on rear * Rotary Switch - 10 mA, 12 VDC, SPST * * ORDERING INFORMATION To order or for custom applications, call 800-874-1874 800 874 1874 * Clarostat Sensors and Controls * El Paso, Texas 79936 Additional Styles (consult factory) - Center tap - Digital output - Push-latch - Momentary switch - Vertical mounting "C" style