Contacts Copper alloy
Plating Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
Moldings High temp. thermoplastic UL 94V-0 rated
Card detection switch Stainless steel and copper alloy
Number of Contacts 8
Mechanical life 100,000 cycles min
Card insertion force 10 N max
Card extraction force 1 N min /10 N max (4N max for
CCM01-2253, 2255)
Contact force 0.25 N min / 0.50 N max
Card detection switch 0.8 N max for actuation (end travel switch
actuation force actuates when card is 0,9 mm from card stop);
1.8 N max for complete depression
Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0,35 mm;
Max electrical discontinuity 1µs
Shock Peak value 500 m/s2– Duration 11 ms
3 shocks in each direction of each axis;
Max electrical discontinuity 1 µs
Insulation resistance 1,000 MΩmin
Resistance 100 mΩmax
Current rating 10 µA min / 1 A max
Dielectric strength 750 Vrms min
Card detection switch Normally open
Contact resistance 100 mΩmax
Dielectric strength 250 Vrms min
Current rating 1 mA min / 10 mA max
Maximum power 0.2 VA
Operating temperature -40°C to +85°C
Soldering temperature Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
Damp heat IEC 512 test number 11c (10 days)
Salt mist IEC 512 test number 11f (96 hours)
Card detection switch Sealed against dust
30 per tray, 10 trays per box.
8
www.ittcannon.com
CCM01 MK II
The CCM01 MK II connectors with fixed
contacts have been developed for
applications where a landing contact
mechanism is not required but
performance and reliability are still key
considerations.
Features
• Available with 8 contacts which are
designed to give a consistently reliable
normal force over the life of the
connector.
• For added reliability, the card detection
switch (which is normally open) is sealed
against dust and debris.
• Available with through-hole or surface
mount contact termination and its light-
weight design means that the connector
can be automatically pick-and-placed.
• The moldings are made from high
temperature thermoplastics suited
for infrared and convection soldering
processes.
• Plastic springs in the cover give a
positive feel as the card is fully inserted.
In case of special version with low card
insertions and withdrawal, then the
CCM connector is supplied without this
spring effect.
• The reduced size of the contact base
saves PCB space, making the
connector more stable during soldering.
This creates an air gap between the
contacts and card entry slot which
reduces the risk of an electrostatic
transfer to the PCB.
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that of
standard gold plating.
• A chamfered opening to the card entry
slot improves the card guidance into the
connector.
• The contact area is spooned to reduce
the risk of accidental (or deliberate)
damage and to optimize the electrical
connection with the card.
• Robustly formed printed circuit tails
allow a coplanarity of ± 0.05 mm to be
maintained.
EMVTM is a trademark owned by EMVCoLLC.
Part Number Number Termination Retention Packaging
of Contacts Tail Design Force Multiple
CCM01-2064 8 THT w/board lock <10N 300
CCM01-2065 8 SMT w/board lock <10N 300
CCM01-2251 8 SMT <10N 300
CCM01-2253 8 SMT <4N 300
CCM01-2255 8 Through-hole <4N 300
Construction
Mechanical Data
Contact Electrical Data
Switch Electrical Data
Environmental Data
Ordering Code
Packaging
EMVTM compatible
CCM01 MK II
Dimensional Drawings
A
A
(REF.)
50,2
1
0,3
A
4
3
3x
2,54
36,2
4,15±0,3 Card entry
8
±0,3
(REF.)
55,6
(REF.)
36,2
54,3
55,6
±0,2
0,65
1
4,4±0,2
7,67,6
9,6
±0,1
15,5
20
0,9±0,25
5,8
6,3
0,7
0,3
A
0,8
0,85
(REF.)
9,6
0,1
0
-0,1
(REF.)
7,6
52
ø0,2
A
B
19,12
1,8
3,15
1,6 PCB Thickness
14
10
4 Snap
Feet
Embossed
Channel
Card insertion
direction
CCM01-
2065
XX-XXX
Designation
& Date-Code area
Card stop
8x
Pick and place area
ø13
2x
4x
SEE DETAIL
A
A-A
DETAIL
A
A
PCB Layout
20
1,8
0
14
10
3,813,81
2,64
15,2
9,6
19,12
0
21,66
24,2
26,74
29,74
33,74
52
12,9
1,51,5
9,2
2
1,3
0,2
ø
3,2
+0,1
0
ø0,1
(Component side)
Card end travel
switch terminals
0,85 x 0,7
Contact foot area
0,8 x 1
4x
10x
C1
C2
C3
C4
C5
C6
C7
C8
SW SW
Contact location according to
ISO 7816-2
Plastic outline
Pad
CCM01-2065 (8 contacts SMT with board lock)
Drawings shown for reference only. For other part
numbers please consult your local
Cannon Customer Service Center.
Unless otherwise stated, tolerances are ± 0,10 mm
CCM01-2065
9
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
