Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ030, Flat Pack
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31517
418 Revision: 03-Mar-10
DFM (Military M83401)
Vishay Dale
FEATURES
•Isolated, bussed and dual terminator schematics available.
•Hot-solder dipped leads
•MIL-PRF-83401 qualified
•Thick film resisitive elements
•TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)
characteristic
•100 % screen tested per group A, subgroup 1 of
MIL-PRF-83401
•0.065" (1.65 mm) height for high density packaging
Notes
• Consult factory for stocked values.
(1) K = ± 100 ppm/°C; M = ± 300 ppm/°C.
(2) ± 2 % standard, ± 1 % and ± 5 % available.
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL/
PIN NO.
MIL
STYLE
MIL
SPEC.
SHEET
SCHEMATIC
POWER RATING RESISTANCE
RANGE
Ω
TOLERANCE (2)
± %
TEMPERATURE
COEFFICIENT (1)
(- 55 °C to + 125 °C)
± ppm/°C
WEIGHT
g
ELEMENT
P70 °C
W
PACKAGE
P70 °C
W
DFM14 RZ030 03
11 (A) 0.050 0.350 10 to 1M
1, 2, 5 100, 300 0.412 (B) 0.025 0.325 10 to 1M
15 (J) 0.015 0.350 Consult factory
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340103M6801GAD05 (preferred part numbering format)
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE TOLERANCE SCHEMATIC PACKAGING
M83401 03 K = 100 ppm
M = 300 ppm
3 digit significant
figure, followed by
a multiplier
10R0 = 10 Ω
3302 = 33 kΩ
1004 = 1 MΩ
F = ± 1 %
G = ± 2 %
J = ± 5 %
A = Isolated
B = Bussed
D05 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
Historical Part Number Example: M8340103M6801GA (will continue to be accepted)
M83401 03 M 6801 G A D05
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE TOLERANCE SCHEMATIC PACKAGING
New Global Part Numbering: M8340103KA001GJD05 (preferred part numbering format)
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE TOLERANCE SCHEMATIC PACKAGING
M83401 03 K = 100 ppm
M = 300 ppm
Per Std.
MIL. Spec.
(see Impedance
Codes table)
F = ± 1 %
G = ± 2 %
J = ± 5 %
J = Dual terminator D05 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
Historical Part Number Example: M8340103KA001GJ (will continue to be accepted)
M83401 03 M A001 G J D05
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE TOLERANCE SCHEMATIC PACKAGING
50DAG1086M3010438M
50DJG100AK3010438M
Document Number: 31517 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 03-Mar-10 419
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ030, Flat Pack Vishay Dale
DIMENSIONS in inches (millimeters)
MECHANICAL SPECIFICATIONS
Marking resistance to solvents Permanency testing per MIL-PRF-83401
Solderability Per MIL-PRF-83401
Terminals
Per MIL-STD-1276
DFM1411, DFM1412 and DFM1415 = Type G (hot solder dipped)
Hot solder dipped leads supplied as standard finish.
Body Epoxy filled ceramic sandwich
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MDM SERIES
Maximum operating voltage VDC 50
Voltage coefficient of resistance Veff < 50 ppm
Dielectric strength VAC 100 min.
Insulation resistance Ω10 000M
Operating temperature range °C - 55 to + 125
Storage temperature range °C - 55 to + 150
IMPEDANCE CODES
CODE R1 (Ω)R
2 (Ω)CODER
1 (Ω)R
2 (Ω)
A001 82 130 A010 330 470
A002 120 200 A011 330 680
A003 130 210 A012 1.5K 3.3K
A004 160 260 A013 3K 6.2K
A005 180 240 A014 180 270
A006 180 390 A015 270 270
A007 220 270 A016 560 560
A008 220 330 A017 560 1.2K
A009 330 390 A018 620 2.7K
Pin #1
0.050 (1.27)
T yp.
0.019 ± 0.006
(0.483 ± 0.15)
0.305
(7.75)
Max.
0.365 (9.27) Min.
0.385 (9.78) Max.
0.250 (6.35)
Min.
0.075
(1.91)
Max.
0.250 (6.35)
Min.
0.825 (20.96)
Max.
0.005 + 0.004
- 0.002
(0.127 + 0.102
- 0.051)
Derating
11 Schematic
0.400
0.350
0.200
0.050
- 55 + 25 + 70 + 125 + 150
Ambient Temperature °C
DFM1411
Package
Single
Resistor
Power Rating (W)
15 Schematic
- 55 + 25 + 70 + 125 + 150
DFM1415
Package
0.400
0.350
0.200
0.015
Single
Resistor
Ambient Temperature °C
Power Rating (W)
12 Schematic
DFM1412
Package
- 55 + 25 + 70 + 125 + 150
Single
Resistor
0.400
0.325
0.200
0.025
Ambient Temperature °C
Power Rating (W)
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31517
420 Revision: 03-Mar-10
DFM (Military M83401)
Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ030, Flat Pack
CIRCUIT APPLICATIONS
11 Schematic
DFM1411 (M8340103xxxxxxA)
7 isolated resistors
The DFM1411 provides the user with 7 nominally equal resistors with each resistor isolated from
all others. Commonly used in the following applications:
• “Wired OR” pull-up • Line termination • LED current limiting
• Power driven pull-up • ECL output pull-down • Power gate pull-up
• TTL input pull-down • Long-line impedance balancing
12 Schematic
DFM1412 (M8340103xxxxxxB)
13 resistors with one pin common
The DFM1412 provides the user with a choice of 13 nominally equal resistors, each connected
to a common pin. Commonly used in the following applications:
• MOS/ROM pull-up/ • “Wired OR” pull-up • Digital pulse squaring
• pull-down • Power driven pull-up • TTL input pull-down
• Open Collector pull-up • TTL unused gate pull-up • High speed parallel pull-up
15 Schematic
DFM1415 (M8340103xxxxxxJ)
12 pairs of resistors
The DFM1415 provides the user with a choice of 12 pairs of R1/R2 resistor values for pulse
squaring and TTL dual-line terminating requirements.
CAGE CODE: 91637
Pin #1
DFM1411
••••
•
••
Pin #1
DFM1412
DFM1415
14 R1 R1 R1 R1 R1 R1
R2 R2
R2 R2 R2
R1 R1 R1 R1 R1 R1
R2
R2 R2 R2
R2 R2 R2
1
Document Number: 31517 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 03-Mar-10 421
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ030, Flat Pack Vishay Dale
PERFORMANCE
TEST CONDITIONS MAX. ΔR (TYPICAL TEST LOTS)
Power conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short time overload 2.5 x rated working voltage for 5 s ± 0.25 % ΔR (char. K)
± 0.50 % ΔR (char. M)
Low temperature operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR (char. K)
± 0.50 % ΔR (char. M)
Moisture resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to soldering heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR
Load life 1000 h at + 70 °C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
± 0.50 % ΔR (char. K)
± 2.0 % ΔR (char. M)
Terminal strength 1.5 pound pull for 30 s ± 0.25 % ΔR
Insulation resistance 10 000 MΩ (minimum) -
Dielectric withstanding voltage No evidence of arcing or damage (200 VRMS for 1 min) -
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
