SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
20.32mm (0.8INCH) 16 SEGMENT SINGLE
DIGIT
Part Number: PSA08-12SURKWA Hyper Red
Features
z0.8 inch character height.
zLow current operation.
zHigh contrast and light output.
zCommon cathode and common anode available.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
Selection Guide
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Hyper Red (AlGaInP) White Diffused
31000 71000
Common Anode
*9000 *21000
PSA08-12SURKWA
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 645 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
Hyper Red PSA08-12SURKWA
SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
PACKING & LABEL SPECIFICATIONS PSA08-12SURKWA
SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
SPEC NO: DSAK2853 REV NO: V.5A DATE: MAY/10/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000352
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
