Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Sxx20x & Sxx25x Series Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits * RoHS compliant * Glass - passivated junctions Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Agency File Number L Package: E71639 (R) * Surge capability up to 350 A Applications Agency Approval Agency * Voltage capability up to 1000 V Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Schematic Symbol Symbol IT(RMS) VDRM /VRRM IGT Value Unit 20 & 25 A 400 to 1000 V 30 to 35 mA A K G Absolute Maximum Ratings -- 20A SCR Symbol Parameter Test Conditions IT(RMS) RMS on-state current IT(AV) Average on-state current ITSM I 2t di/dt IGM PG(AV) Tstg TJ Sxx20x & Sxx25x Series TC = 80C Sxx20x TC = 80C Value Unit 20 A 12.8 A single half cycle; f = 50Hz; TJ (initial) = 25C 255 single half cycle; f = 60Hz; TJ (initial) = 25C 300 I2t Value for fusing tp = 8.3 ms 374 A2s Critical rate of rise of on-state current f = 60Hz ; TJ = 125C 125 A/s Peak gate current TJ = 125C 3 A Average gate power dissipation TJ = 125C 0.6 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Peak non-repetitive surge current 269 Revised: November 1, 2010 05:04 PM A (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Absolute Maximum Ratings -- 25A SCR Symbol Parameter Test Conditions IT(RMS) RMS on-state current IT(AV) Average on-state current Value Unit 25 A 16.0 A Sxx25L: TC=75C Sxx25R/Sxx25N: TC=100C Sxx25L TC = 75C Sxx25R/Sxx25N TC = 100C single half cycle; f = 50Hz; TJ (initial) = 25C 300 single half cycle; f = 60Hz; TJ (initial) = 25C 350 ITSM Peak non-repetitive surge current I 2t I2t Value for fusing tp = 8.3 ms 510 A2s Critical rate of rise of on-state current f = 60Hz ; TJ = 125C 150 A/s Peak gate current TJ = 125C 3.5 A Average gate power dissipation TJ = 125C 0.8 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C di/dt IGM PG(AV) Tstg TJ A Electrical Characteristics (TJ = 25C, unless otherwise specified) Symbol IGT Value Test Conditions VD = 12V; RL = 30 Sxx20L Sxx25x MAX. 30 35 MIN. 1 1 MAX. VGT VD = VDRM; gate open; TJ = 100C 1.5 400V 450 600V 425 800V 1000V dv/dt VD = VDRM; gate open; TJ = 125C Unit mA V 400 200 MIN. 400V 350 600V 325 800V V/s 300 MIN. 0.2 V VGD VD = VDRM; RL = 3.3 k; TJ = 125C IH IT = 400mA (initial) MAX. tq (1) MAX. 35 s tgt IG = 2 x IGT; PW = 15s; IT = 40A TYP. 2 s 40 50 Notes : xx = voltage, x = package (1) IT=2A; tp=50s; dv/dt=5V/s; di/dt=-30A/s Sxx20x & Sxx25x Series 270 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. mA Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Static Characteristics Symbol Test Conditions 20A Device IT = 40A; tp = 380s VTM IDRM / IRRM 1.6 V 400 - 600V 10 800 - 1000V 20 400 - 600V 500 TJ = 100C VDRM / VRRM Unit MAX. 25A Device IT = 50A; tp = 380s TJ = 25C Value MAX. 800V TJ = 125C A 1000 1000V 3000 400 - 600V 1000 800V 2000 Thermal Resistances Symbol Parameter Value Junction to case (AC) R(J-C) Junction to ambient R(J-A) Sxx25R / Sxx25N 1.0 Sxx20L 2.4 Sxx25L 2.35 Sxx25R 40 Sxx20L / Sxx25L 50 Unit C/W C/W Note: xx = voltage Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N ormalized DC Gate Trigger Voltage vs. Junction Temperature 2.0 Ratio of VGT / VGT (TJ = 25C) Ratio of IGT / IGT (TJ = 25C) 2.0 1.5 1.0 0.5 0.0 -40 -15 10 35 60 85 110 125 Junction Temperature (TJ) - (C) Sxx20x & Sxx25x Series 1.5 1.0 0.5 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (C) 271 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 125 Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: O n-State Current vs. On-State Voltage (Typical) Intantaneous On-state Current (iT) - Amps Ratio of IH / IH (TJ = 25C) 2.0 1.5 1.0 0.5 90 70 60 40 30 20 10 35 60 85 110 Sxx20L 10 0 -15 Sxx25L Sxx25R Sxx25N 50 0.0 -40 T J = 25C 80 125 0.7 0.8 22 130 20 125 18 120 16 Sxx20L 12 10 8 Sxx25L Sxx25R Sxx25N 6 4 0 10 15 20 100 Sxx20L 90 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 5 10 15 Maximum Allowable Ambient Temperature (TA) - C Maximum Allowable Case Temperature (TC) - C 25 30 Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current 120 Sxx25R Sxx25N 110 105 100 Sxx25L Sxx20L 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 100 80 Sxx25L Sxx25N Sxx25R 60 Sxx20L 40 20 0 70 0 2 4 6 8 10 12 14 16 18 Average On-State Current [IT(AVE)] - Amps Sxx20x & Sxx25x Series 20 RMS On-State Current [IT(RMS)] - Amps 120 75 1.6 Sxx25L 95 125 80 1.5 105 0 130 90 1.4 70 25 Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current 95 1.3 Sxx25R Sxx25N RMS On-State Current [IT(RMS)] - (Amps) 115 1.2 110 75 5 1.1 115 80 2 0 1.0 Figure 6: M aximum Allowable Case Temperature vs. RMS On-State Current Maximum Allowable Case Temperature (TC) - C Average On-State Power Dissipation [PD(AV)] - (Watts) Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 14 0.9 Instantaneous On-state Voltage (vT) - Volts Junction Temperature (TJ) - (C) 0.0 0.5 1.0 1.5 2.0 RMS On-State Current [IT(RMS)] - Amps 272 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 2.5 Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current Maximum Allowable Ambient Temperature (TA) - C 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 100 Sxx25L Sxx25N Sxx25R 80 Sxx20L 60 40 20 0 0.0 0.5 1.5 1.0 Average On-State Current [IT(AVE)] - Amps Note: xx = voltage Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 1.2 Sxx25L Sxx25R Sxx25N 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 Sxx20L 100 ITRM 0.8 0.6 0.4 0.2 tW 0.0 10 0.5 50.0 10.0 1.0 0 Pulse Current Duration (tW) - ms 25 50 75 100 125 Case Temperature (TC) - C Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) - Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. Sxx25L Sxx25R Sxx25N 100 Sxx20L 10 1 10 100 1000 Surge Current Duration -- Full Cycles Sxx20x & Sxx25x Series 273 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 150 Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Soldering Parameters Pb - Free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds Peak Temperature (TP) 260 Time within 5C of actual peak Temperature (tp) 20 - 40 seconds +0/-5 tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 tS time to peak temperature Time C Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy AC Blocking Temperature Cycling Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Sxx20x & Sxx25x Series Ramp-do Ramp-down 274 Revised: November 1, 2010 05:04 PM Thermal Shock Autoclave Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150C 1008 hours; -40C MIL-STD-750, M-1056 10 cycles; 0C to 100C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Dimensions -- TO-220AB (R-Package) -- Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions -- TO-220AB (L-Package) -- Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J Sxx20x & Sxx25x Series N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 275 Revised: November 1, 2010 05:04 PM Inches Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs Dimensions -TO- 263AA (N-package) -- D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE A B C D E F G H J K S V U W 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 Inches Millimeters Min Max Min Max 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.016 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 3.81 .150 2.03 .080 6.60 .260 Product Selector Part Number Voltage Gate Sensitivity Type Package X 30mA Standard SCR TO-220L X X 35mA Standard SCR TO-220L X X 35mA Standard SCR TO-220R X X 35mA Standard SCR TO-263 400V 600V 800V 1000V Sxx20L X X X Sxx25L X X Sxx25R X X Sxx25N X X Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx20L Sxx20L 2.2g Bulk 500 Sxx20LTP Sxx20L 2.2g Tube 500 (50 per tube) Sxx25L Sxx25L 2.2g Bulk 500 Sxx25LTP Sxx25L 2.2g Tube 500 (50 per tube) Sxx25R Sxx25R 2.2g Bulk 500 Sxx25RTP Sxx25R 2.2g Tube 500 (50 per tube) Sxx25NTP Sxx25N 1.6g Tube 500 (50 per tube) Sxx25NRP Sxx25N 1.6g Embossed Carrier 500 Note: xx = Voltage Sxx20x & Sxx25x Series 276 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 20 / 25 Amp Standard SCRs TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Part Numbering System S 60 20 L DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 20: 20A 25: 25A Part Marking System 56 LEAD FORM DIMENSIONS xx: Lead Form Option SENSITIVITY & TYPE (blank): Sxxx20L = 30mA Sxxx25x = 35mA Q6020R5 YM (R) PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D 2-Pak) Q6020L5 MY (R) Sxx20x & Sxx25x Series 277 Revised: November 1, 2010 05:04 PM (c)2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.