PFW5000 – PFW5010 1 of 2 © 2002 Won-Top Electronics
PFW5000 – PFW5010
50A FLAG LEAD 1/2" PRESS-FIT DIODE
Features
! Diffused Junction
! Low Leakage
! Low Cost
! High Surge Current Capability J
! Typical IR less than 10µA
D
Mechanical Data H C
! Case: All Copper Case and Components E
Hermetically Sealed G
! Terminals: Contact Areas Readily Solderable
! Polarity: Cathode to Case(Reverse Units Are B
Available Upon Request and Are Designated
By An “R” Suffix, i.e. PFW5002R or PFW5010R)
! Polarity: Red Color Equals Standard,
Black Color Equals Reverse Polarity
! Mounting Position: Any
A
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inducti ve l oad.
For capacitive load, derat e current by 20%.
Characteristic Symbol PFW5000 PFW5001 PFW5002 PFW5004 PFW5006 PFW5008 PFW5010 Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
@T
A = 150°C IO50 A
Non-Repetiti ve P eak Forward Surge
Current 8.3ms Single half sine-wave
superimpos ed on rated load
(JEDEC Method)
IFSM 500 A
Forward Voltage @IF = 100A VFM 1.08 V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 10
500 µA
Typical Junction Capacitance (Note 1) Cj300 pF
Typical Thermal Resistance
Junct i on to Case (Note 2) RJC 1.2 K/W
Operating and Storage Temperat ure Range TJ, TSTG -65 t o +175 °C
*Glass passivated forms are available upon request
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
WTE
POWER SEMICONDUCTORS
DO-21
Dim Min Max
A15.63 16.14
B12.75 12.83
C8.89 10.04
D1.25 Ø 1.30Ø
E3.05 3.30
G5.59 6.10
H10.42 12.45
J26.10 27.40
All Dimensions in mm
PFW5000 – PFW5010 2 of 2 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
PFW 5000 Press Fit 100 Units/Tray
PFW 5001 Press Fit 100 Units/Tray
PFW 5002 Press Fit 100 Units/Tray
PFW 5004 Press Fit 100 Units/Tray
PFW 5006 Press Fit 100 Units/Tray
PFW 5008 Press Fit 100 Units/Tray
PFW 5010 Press Fit 100 Units/Tray
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wont op. com
