0.43" Single Character DLO4135/DLG4137 0.68" Single Character DLO7135/DLG7137 5 x 7 Dot Matrix Intelligent Display(R) Devices with Memory/Decoder/Driver Lead (Pb) Free Product RoHS Compliant SUPER-RED: DLO4135, DLO7135 GREEN: DLG4137, DLG7137 DLO4135 / DLG4137 DLO7135 / DLG7137 FEATURES DESCRIPTION * 5 x 7 Dot Matrix Characters DLO4135/DLG4137: 10.92 mm (0.43") High DLO7135/DLG7137: 17.27 mm (0.68") High * Wide Viewing Angle 75 * 96 Character ASCII Set Upper Case and Lower Case Characters * Fully Encapsulated, Rugged Solid Plastic Package * Built-in Memory * Built-in Character Generator * Built-in Multiplex and LED Drive Circuitry * Built-in Lamp Test * Intensity Control (4 levels) * Microprocessor Bus Compatible * Intensity Coded for Display Uniformity * Single 5-Volt Power Supply * X/Y Stackable * Available in Super-red and Green The DLX413X/DLX713X are single digit 5 x 7 dot matrix Intelligent Display devices. The DLX413X character is 10.92 mm (0.43") high. The DLX713X character is 17.27 mm (0.68") high. The built-in CMOS integrated circuit contains memory, ASCII character generator, LED multiplexing and drive circuitry; thereby eliminating the need for additional circuitry. They will display the 96 ASCII characters. 2009-08-01 These devices are TTL and microprocessor compatible and offer the possibility of cascading the displays, allowing for multi-character messages. These displays were designed for viewing distances of up to 20 feet (DLX413X) or 30 feet (DLX713X). They require a single 5-volt power supply and parallel ASCII input. Important: Refer to Appnote 18, "Using and Handling Intelligent Display Devices" at www.osram-os.com. Since this is a CMOS device, normal precautions should be taken to avoid static damage. 1 DLX413X, DLX713X Ordering Information Type 2009-08-01 Color of Emission DLO7135 super-red DLG7137 green DLO4135 super-red DLO7135 green Character Height mm (inch) Ordering Code Q68000A7157 10.92 (0.68) Q68000A7159 Q68000A4297 17.27 (0.43) 2 Q68000A4299 DLX413X, DLX713X 7.62 (0.300) DLO4135 Z 12.7 (0.500) max. 0.3 (0.012) Dimensions in mm (inch) 2.54 (0.100) Package Outlines 7.87 (0.310) 2.54 (0.100) Luminous Intensity Code Z 2.54 (0.100) typ. 2.54 (0.100) EIA Date Code YYWW 1.09 (0.043) 10.92 (0.430) 5.97 (0.235) Device marking begins over pin 1 DLO4135 OSRAM 25.4 (1.000) max. 4.57 (0.180) 0.51 (0.020) 3.56 (0.140) min. 7.62 (0.300) 1.65 (0.065) typ. IDOD5002 Package Outlines Dimensions in mm (inch) 15.24 (0.600) 17.78 (0.700) 7.49 (0.295) DLX713X Z 1.27 (0.050) 12.7 (0.500) ref. V 8.26 (0.325) 3.81 (0.150) 2.54 (0.100) typ. Device marking begins over pin 1 20.32 (0.800) 0.45 (0.018) sq. 2.54 (0.100) typ. 17.27 (0.680) Pin 1 Indicator 4.06 (0.160) YYWW 3.18 (0.125) 1.91 (0.075) ref. 2.03 (0.080) diam. ref. DLX713X Z OSRAM 2.54 (1.000) typ. V 12.19 (0.480) EIA Date Code Luminous Intensity Code IDOD5003 2009-08-01 3 DLX413X, DLX713X Maximum Ratings Parameter Symbol Value Unit Top -40 to +85 C Storage temperature range Tstg -40 to +100 C VCC range VCC -0.5 to 7.0 Vdc -0.5 to VCC +0.5 Vdc 260 C 85 % Operating temperature range 1) Voltage, Any Pin, Respect to GND Solder temperature 1.59 mm (0.063'') below seating plane, t < 5.0 s Ts Relative Humidity at 85C (non condensing) Optical Characteristics (typ.) (TA = 25 C) Parameter Symbol Spectral Peak Wavelength (typ.) Viewing Angle Time Averaged Luminous Intensity VCC = 5.0 V Unit DLO4135 DLO7135 DLG4137 DLG7137 super-red green peak 635 565 nm 2 75 75 deg. 1500 1500 mcd/Dot 1.8:1.0 1.8:1.0 (typ.) Dot to Dot Intensity Ratio Values (max.) Luminous Intensity DLO4135, DLG4137 Bin mcd per 5 dots DLO7135 Bin DLG7137 mcd per 5 dots Bin mcd per 5 dots A 2.93 ... 3.62 A 3.6 ... 4.4 A 4.5 ... 5.5 B 3.63 ... 4.48 B 4.5 ... 5.4 B 5.6 ... 6.8 C 4.49 ... 5.55 C 5.5 ... 6.8 C 6.9 ... 8.5 D 5.56 ... 6.87 D 6.9 ... 8.4 D 8.6 ... 10.5 E 6.88 ... 8.50 E 8.5 ... 10.4 E 10.6 ... 13.0 F 8.51 ... 10.51 F 10.5 ... 12.9 F 13.1 ... 16.1 G 10.52 ... 13.00 G 13.0 ... 16.0 G 16.2 ... 20.0 H 13.01 ... 16.07 H 16.1 ... 18.4 H 20.1 ... 23.0 I 16.08 ... 19.87 J 19.88 ... 24.56 K 24.57 ... 30.35 L 30.36 ... 37.51 Conditions: 1. VCC = 5.0 Vdc 2. Ambient Temperature = 25C. 3. 5 LEDs on at full brightness setting during measurement (Character Hex Code 2F). 4. Accuracy of measurement is 11%. 2009-08-01 4 DLX413X, DLX713X Timing Parameters at 25C (VCC=5.0 V 0.5 V) Timing Characteristics - Write Cycle Waveforms Symbol Parameter Units (ns) TCES Chip Enable Set-Up 10 TDS Data Set Up 100 TW Write Pulse 120 TDH Data Hold 20 TCEH Chip Enable Hold 20 TACC Access Time 150 tACC CE tCEH tW WE tCES tDH tDS Data IDTC5044 DC Characteristics Parameter DLx413x ICC (20 dots on) -40C +25C +85C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. -- 135 -- -- 100 140 -- 85 -- 125 160 155 DLx713x ICC (20 dots on) 105 Units Conditions mA VCC=5.0 V, BL0=BL1=5.0 V mA VCC=5.0 V, BL0=BL1=5.0 V ICC Blank -- 2.0 -- -- 1.5 4.0 -- 0.8 -- mA VCC=WR=5.0 V, BL0=BL1=0 V IIL (all inputs) -- -- -- -- 50 100 -- -- -- A VIN=0.8 V, VCC=5.0 V 0.5 V VIH 2.0 -- -- 2.0 -- -- 2.0 -- -- V VCC=5.0 V 0.5 V VIL -- -- 0.8 -- -- 0.8 -- -- 0.8 V VCC=5.0 V 0.5 V VCC 4.5 5.0 5.5 4.5 5.0 5.5 4.5 5.0 5.5 V -- Notes: 1. "Off Axis Viewing Angle" definition: The minimum angle in any direction from the normal to the display surface at which any part of any dot in the display is not visible. 2. This display contains a CMOS integrated circuit. Normal CMOS handling precautions should be taken to avoid damage due to high static voltages or electric fields. See Appnote 18 at www.osram-os.com under Intelligent Displays. 3. Unused inputs must be tied to an appropriate logic voltage level (either V + or GND). 4. VCC=5.0 Vdc 10%. 5. Clean only in water, isopropyl alcohol, TE (or equivalent). 2009-08-01 5 DLX413X, DLX713X Top View -- DLO4135, DLG4137 1 2 3 4 5 6 7 8 Top View -- DLO7135, DLG7137 16 15 14 13 12 11 10 9 14 13 12 11 10 9 8 1 2 3 4 5 5 7 IDPA5104 IDPA5103 Pin Functions -- DLO4135, DLG4137 Pin Functions -- DLO7135, DLG7137 Pin Function Pin Function Pin Function Pin Function 1 LT Lamp 9 D0 Data LSB 1 VCC 8 D0 Data Input LSB 2 WR Write 10 D1 Data 2 LT Lamp Test 9 D1 Data 3 BL1 Brightness 11 D2 Data 3 CE Chip Enable 10 D2 Data 4 BL0 Brightness 12 D3 Data 4 WR Write 11 D3 Data 5 No Pin 13 D4 Data 5 BL1 Brightness 12 D4 Data 6 No Pin 14 D5 Data 6 BL0 Brightness 13 D5 Data 7 CE Chip Enable 15 D6 Data MSB 7 GND 14 8 GND 16 +VCC D6 Data Input MSB 2009-08-01 6 DLX413X, DLX713X Lamp Test When the lamp test (LT) is activated, all dots on the display are illuminated at 1 7 brightness. The lamp test function is independent of write (WR) and the settings of the blanking inputs (BL0, BL1). This convenient test gives a visual indication that all dots are functioning properly. Lamp test also may be used as a cursor function or pointer which does not destroy previously displayed characters. Dimming and Blanking the Display Brightness Level BL1 BL0 Blank 0 0 1 7 Brightness 0 1 1 2 Brightness 1 0 Full Brightness 1 1 Loading Data Loading data into the display is straightforward. Chip enable (CE) should be present and stable during a write pulse (WR). Parallel data information should be stable for the minimum time (TW) and held for TDH after write has gone high. No synchronization is necessary and each character will continue to be displayed until it is replaced with another. Multiple displays may be stacked together with only an additional decoder IC for chip enable decoding. Note: Either BL0 or BL1 should be held high for display to light up. Data Loading Example CE WR BL0 BL1 LT Data Input D6 D5 D4 D3 D2 D1 D0 H X H X H X X X X X X X NC X X L L H X X X X X X X Blank X X X X L X X X X X X X Lamp Test L L H H H H L L L L L H A L L H H H H H H L L H L r L L H H H L H H L L H H 3 L L H H H L H L H L H H + X=don't care, NC=no change 2009-08-01 7 DLX413X, DLX713X 16 Digits Interconnection +5 GND BL0-BL1 LT D0-D6 WR A0-A3 D15 2 7 D0 11 4 16 CE IDCD5025 Character Set D0 D1 D2 D3 D6 D5 D4 HEX ASC|| CODE 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 0 0 2 1 1 0 0 3 0 0 1 0 4 1 0 1 0 5 0 1 1 0 6 1 1 1 0 7 0 0 0 1 8 1 0 0 1 9 0 1 0 1 A 1 1 0 1 B 0 0 1 1 C 1 0 1 1 D 0 1 1 1 E 1 1 1 1 F 0 THESE CODES DISPLAY BLANK 0 0 1 1 0 1 0 2 0 1 1 3 1 0 0 4 1 0 1 5 1 1 0 6 1 1 1 7 IDCS5085 Notes: 1. High=1 level 2. Low= 0 level 3. Upon power up, the device will initialize in a random state. 2009-08-01 8 DLX413X, DLX713X Revision History: 2009-08-01 Previous Version: 2006-03-31 Page Subjects (major changes since last revision) Date of change all complete rework 2004-09-13 all Lead free device 2006-01-23 3 Package Outlines corrected 2009-03-31 5 DC Characteristics table corrected 2009-08-01 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1) may only be used in life-support devices or systems2) with the express written approval of OSRAM OS. 1) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2009-08-01 9