Lead (Pb) Free Product -
RoHS Compliant
SUPER-RED:
DLO4135, DLO7135
GREEN:
DLG4137, DLG7137
0.43" Single Character DLO4135/DLG4137
0.68" Single Character DLO7135/DLG7137
5 x 7 Dot Matrix Intelligent Display® Devices with Memory/Decoder/Driver
DLO4135 / DLG4137 DLO7135 / DLG7137
2009-08-01 1
FEATURES
• 5 x 7 Dot Matrix Characters
DLO4135/DLG4137: 10.92 mm (0.43") High
DLO7135/DLG7137: 17.27 mm (0.68") High
• Wide Viewing Angle ± 75°
• 96 Character ASCII Set
Upper Case and Lower Case Characters
• Fully Encapsulated, Rugged Solid Plastic
Package
• Built-in Memory
• Built-in Character Generator
• Built-in Multiplex and LED Drive Circuitry
• Built-in Lamp Test
• Intensity Control (4 levels)
• Microprocessor Bus Compatible
• Intensity Coded for Display Uniformity
• Single 5-Volt Power Supply
• X/Y Stackable
• Available in Super-red and Green
DESCRIPTION
The DLX413X/DLX713X are single digit 5 x 7 dot
matrix Intelligent Display devices. The DLX413X
character is 10.92 mm (0.43") high. The DLX713X
character is 17.27 mm (0.68") high. The built-in
CMOS integrated circuit contains memory, ASCII
character generator, LED multiplexing and drive
circuitry; thereby eliminating the need for
additional circuitry. They will display the 96 ASCII
characters.
These devices are TTL and microprocessor
compatible and offer the possibility of cascading
the displays, allowing for multi-character
messages. These displays were designed for
viewing distances of up to 20 feet (DLX413X) or 30
feet (DLX713X). They require a single 5-volt
power supply and parallel ASCII input.
Important: Refer to Appnote 18, “Using and
Handling Intelligent Display Devices” at
www.osram-os.com. Since this is a CMOS device,
normal precautions should be taken to avoid static
damage.
2009-08-01 2
DLX413X, DLX713X
Ordering Information
Type Color of Emission Character Height
mm (inch)
Ordering Code
DLO7135 super-red
10.92 (0.68)
Q68000A7157
DLG7137 green Q68000A7159
DLO4135 super-red
17.27 (0.43)
Q68000A4297
DLO7135 green Q68000A4299
DLX413X, DLX713X
2009-08-01 3
Package Outlines Dimensions in mm (inch)
Package Outlines Dimensions in mm (inch)
7.87 (0.310)
DLO4135
OSRAM YYWW
Z
10.92 (0.430)
25.4 (1.000) max.
1.65 (0.065) typ.
IDOD5002
1.09 (0.043)
5.97 (0.235)
7.62 (0.300)
12.7 (0.500) max.
2.54 (0.100)
DLO4135 Z
0.3 (0.012)
7.62 (0.300)
2.54 (0.100)
2.54 (0.100) typ.
2.54 (0.100)
4.57 (0.180)
±0.51 (0.020)
Device marking
begins over pin 1
EIA Date
Code
Intensity Code
Luminous
3.56 (0.140) min.
IDOD5003
12.19 (0.480)
1.91 (0.075) ref.
2.54 (1.000) typ.
3.18 (0.125)
3.81 (0.150) 2.54 (0.100) typ.
17.27 (0.680)
2.03 (0.080)
diam. ref.
17.78 (0.700)
15.24 (0.600)
1.27 (0.050)
DLX713X Z V
0.45 (0.018) sq.
2.54 (0.100) typ.
20.32 (0.800)
8.26 (0.325)
4.06 (0.160)
DLX713X Z
OSRAM YYWW
V
Pin 1
Indicator
EIA Date
Code
Luminous
Intensity Code
begins over pin 1
Device marking
7.49 (0.295)
12.7 (0.500) ref.
2009-08-01 4
DLX413X, DLX713X
Maximum Ratings
Parameter Symbol Value Unit
Operating temperature range1) Top -40 to +85 °C
Storage temperature range Tstg -40 to +100 °C
VCC range VCC -0.5 to 7.0 Vdc
Voltage, Any Pin, Respect to GND -0.5 to VCC +0.5 Vdc
Solder temperature
1.59 mm (0.063’’) below seating plane, t < 5.0 s
Ts260 °C
Relative Humidity at 85°C (non condensing) 85 %
Optical Characteristics (typ.)
(TA = 25 °C)
Parameter Symbol Values Unit
DLO4135
DLO7135
DLG4137
DLG7137
super-red green
Spectral Peak Wavelength (typ.) λpeak 635 565 nm
Viewing Angle 2ϕ±75 ±75 deg.
Time Averaged Luminous Intensity (typ.)
VCC = 5.0 V
1500 1500 mcd/Dot
Dot to Dot Intensity Ratio (max.) 1.8:1.0 1.8:1.0
Luminous Intensity
DLO4135, DLG4137 DLO7135 DLG7137
Bin mcd per 5 dots Bin mcd per 5 dots Bin mcd per 5 dots
A 2.93 ... 3.62 A 3.6 ... 4.4 A 4.5 ... 5.5
B 3.63 ... 4.48 B 4.5 ... 5.4 B 5.6 ... 6.8
C 4.49 ... 5.55 C 5.5 ... 6.8 C 6.9 ... 8.5
D 5.56 ... 6.87 D 6.9 ... 8.4 D 8.6 ... 10.5
E 6.88 ... 8.50 E 8.5 ... 10.4 E 10.6 ... 13.0
F 8.51 ... 10.51 F 10.5 ... 12.9 F 13.1 ... 16.1
G 10.52 ... 13.00 G 13.0 ... 16.0 G 16.2 ... 20.0
H 13.01 ... 16.07 H 16.1 ... 18.4 H 20.1 ... 23.0
I 16.08 ... 19.87
J 19.88 ... 24.56
K 24.57 ... 30.35
L 30.36 ... 37.51
Conditions:
1. VCC = 5.0 Vdc
2. Ambient Temperature = 25°C.
3. 5 LEDs on at full brightness setting during measurement (Character Hex Code 2F).
4. Accuracy of measurement is ±11%.
DLX413X, DLX713X
2009-08-01 5
Timing Characteristics - Write Cycle Waveforms
Timing Parameters at 25°C (VCC=5.0 V ±0.5 V)
Symbol Parameter Units (ns)
TCES Chip Enable Set-Up 10
TDS Data Set Up 100
TWWrite Pulse 120
TDH Data Hold 20
TCEH Chip Enable Hold 20
TACC Access Time 150
IDTC5044
CE
WE
Data
ACC
t
t
W
CEH
t
t
DS DH
t
CES
t
DC Characteristics
Parameter –40°C+25°C+85°CUnits Conditions
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
DLx413x
ICC (20 dots on)
—135 ——100 140 —85 —mA VCC=5.0 V, BL0=BL1=5.0 V
DLx713x
ICC (20 dots on)
155 125 160 105 mA VCC=5.0 V, BL0=BL1=5.0 V
ICC Blank —2.0 ——1.5 4.0 —0.8 —mA VCC=WR=5.0 V,
BL0=BL1=0 V
IIL (all inputs) ————50 100 ———µA VIN=0.8 V, VCC=5.0 V ± 0.5 V
VIH 2.0 ——2.0 — — 2.0 ——V VCC=5.0 V ± 0.5 V
VIL ——0.8 — — 0.8 ——0.8 VVCC=5.0 V ± 0.5 V
VCC 4.5 5.0 5.5 4.5 5.0 5.5 4.5 5.0 5.5 V —
Notes:
1. “Off Axis Viewing Angle” definition: The minimum angle in any direction from the normal to the display surface at which any part of
any dot in the display is not visible.
2. This display contains a CMOS integrated circuit. Normal CMOS handling precautions should be taken to avoid damage
due to high static voltages or electric fields. See Appnote 18 at www.osram-os.com under Intelligent Displays.
3. Unused inputs must be tied to an appropriate logic voltage level (either V + or GND).
4. VCC=5.0 Vdc ±10%.
5. Clean only in water, isopropyl alcohol, TE (or equivalent).
DLX413X, DLX713X
2009-08-01 6
Top View — DLO4135, DLG4137 Top View — DLO7135, DLG7137
Pin Functions — DLO4135, DLG4137
Pin Function Pin Function
1LT Lamp 9D0 Data LSB
2WR Write 10 D1 Data
3BL1 Brightness 11 D2 Data
4BL0 Brightness 12 D3 Data
5No Pin 13 D4 Data
6No Pin 14 D5 Data
7CE Chip Enable 15 D6 Data MSB
8 GND 16 +VCC
IDPA5103
116
152
143
134
125
116
107
98
Pin Functions — DLO7135, DLG7137
Pin Function Pin Function
1VCC 8D0 Data Input LSB
2LT Lamp Test 9D1 Data
3CE Chip Enable 10 D2 Data
4WR Write 11 D3 Data
5BL1 Brightness 12 D4 Data
6BL0 Brightness 13 D5 Data
7 GND 14 D6 Data Input
MSB
IDPA5104
1
2
3
4
5
5
7
9
8
10
11
12
13
14
DLX413X, DLX713X
2009-08-01 7
Lamp Test
When the lamp test (LT) is activated, all dots on the display are illuminated at 1⁄ 7 brightness. The lamp
test function is independent of write (WR) and the settings of the blanking inputs (BL0, BL1).
This convenient test gives a visual indication that all dots are functioning properly. Lamp test also may
be used as a cursor function or pointer which does not destroy previously displayed characters.
Loading Data
Loading data into the display is straightforward. Chip enable (CE) should be present and stable during a
write pulse (WR). Parallel data information should be stable for the minimum time (TW) and held for
TDH after write has gone high. No synchronization is necessary and each character will continue to be
displayed until it is replaced with another. Multiple displays may be stacked together with only an
additional decoder IC for chip enable decoding.
Note:
Either BL0 or BL1 should be held high for display to light up.
Dimming and Blanking the Display
Brightness Level BL1 BL0
Blank 0 0
1⁄ 7 Brightness 0 1
1⁄ 2 Brightness 1 0
Full Brightness 1 1
Data Loading Example
CE WR BL0 BL1 LT Data Input
D6 D5 D4 D3 D2 D1 D0
H X H X H X X X X X X X NC
X X L L H X X X X X X X Blank
X X X X L X X X X X X X Lamp Test
L L H H H H L L L L L H A
L L H H H H H H L L H L r
L L H H H L H H L L H H 3
L L H H H L H L H L H H +
X=don’t care, NC=no change
2009-08-01 8
DLX413X, DLX713X
16 Digits Interconnection
Character Set
Notes:
1. High=1 level
2. Low= 0 level
3. Upon power up, the device will initialize in a random state.
IDCD5025
D15 D0
BL0-BL1
4
A0-A3
7
2
11
16
GND
+5
LT
D0-D6
WR
CE
IDCS5085
ASC||
CODE
D0
D1
D2
D3
HEX
D4D5D6
000 0
1
100
2
010
3
011
4
100
5
101
6
110
7
111
0
0
0
0
01
0
0
1
0
2
0
0
0
1
3
0
0
1
1
4
0
1
0
0
5
0
1
1
0
6
0
1
0
1
7
0
1
1
1
8
1
0
0
0
9
1
0
1
0
A
1
0
0
1
B
1
0
1
1
C
1
1
0
0
D
1
1
1
0
E
1
1
0
1
F
1
1
1
1
THESE CODES DISPLAY BLANK
DLX413X, DLX713X
2009-08-01 9
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components1) may only be used in life-support devices or systems2) with the express written approval of OSRAM OS.
1) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure
of that life-support device or system, or to affect its safety or the effectiveness of that device or system.
2) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human
life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Revision History: 2009-08-01
Previous Version: 2006-03-31
Page Subjects (major changes since last revision) Date of change
all complete rework 2004-09-13
all Lead free device 2006-01-23
3Package Outlines corrected 2009-03-31
5DC Characteristics table corrected 2009-08-01
