T-1 3/4 (5mm) SOLID STATE LAMP Part Number: L-7113YD-12V Yellow Features Description z Low power consumption. The Yellow source color devices are made with Gallium z Popular T-1 3/4 diameter package. Arsenide Phosphide on Gallium Phosphide Yellow Light z General purpose leads. Emitting Diode. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z 12V internal resistor. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407 Selection Guide Part No. Dice L-7113YD-12V Lens Type Yellow (GaAsP/GaP) Yellow Diffused Viewing Angle [1] Iv (mcd) [2] V= 12V Min. Typ. 21/2 8 15 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm VF=12V Yellow 588 nm VF=12V Spectral Line Half-width Yellow 35 nm VF=12V IF Forward Current Yellow 8.5 11.5 mA VF=12V IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 120 mW Forward Voltage 14 V Reverse Voltage 5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature [1] 260C For 3 Seconds Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407 Yellow L-7113YD-12V SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407 PACKING & LABEL SPECIFICATIONS L-7113YD-12V SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407 SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407