SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: L-7113YD-12V Yellow
Features
zLow power consumption.
zPopular T-1 3/4 diameter package.
zGeneral purpose leads.
zReliable and rugged.
zLong life - solid state reliability.
zAvailable on tape and reel.
z12V internal resistor.
zRoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
L-7113YD-12V Yellow (GaAsP/GaP) Yellow Diffused 8 15 30°
Iv (mcd) [2]
V= 12V
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm VF=12V
λD [1] Dominant Wavelength Yellow 588 nm VF=12V
Δλ1/2 Spectral Line Half-width Yellow 35 nm VF=12V
IF Forward Current Yellow 8.5 11.5 mA VF=12V
IR Reverse Current Yellow 10 uA VR = 5V
Parameter Yellow Units
Power dissipation 120 mW
Forward Voltage 14 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
Yellow L-7113YD-12V
SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
PACKING & LABEL SPECIFICATIONS L-7113YD-12V
SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
SPEC NO: DSAE8449 REV NO: V.10B DATE: MAY/06/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101005407
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
