Home | Electrical | Mechanical | Environmental | Marking | Request a Quote or Sample | Resources | All Oscillators EMS12 Series Oscillator l l l l l l l l Stock Search Quote/Sample Spread Spectrum MEMS Clock Oscillators Low EMI LVCMOS Output +2.5V Supply Voltage Tri-State, Power Down, and Spread Disable Options Center Spread and Down Spread Modulation Options 4 Pad Plastic SMD Package 30,000 G Shock Resistance RoHS Compliant (Pb-Free) Electrical Specifications Nominal Frequency Frequency Tolerance/Stability Operating Temperature Range Supply Voltage (VDD ) Maximum Supply Voltage Input Current Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Duty Cycle Rise Time/Fall Time Load Drive Capability Output Logic Type Output Control Function Power Down Input Voltage(Vih and Vil) Tri-State Input Voltage (Vih and Vil) Standby Current Disable Current Spread Spectrum Input Voltage(Vih and Vil) Spread Spectrum Modulation Frequency Period Jitter Aging (at 25C) Start Up Time Storage Temperature 1.000MHz to 87.000MHz, 93.000MHz to 175.000MHz (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, 260 Reflow, Shock and Vibration) 100ppm Maximum 50ppm Maximum -20C to +70C -40C to +85C 2.5VDC 10% -0.5VDC to +3.65VDC 25mA Maximum over Nominal Frequency of 1.000MHz to 25.000MHz (Unloaded; VDD=2.5VDC ) 35mA Maximum over Nominal Frequency of 25.000001MHz to 175.000MHz (Unloaded; VDD=2.5VDC ) 90% of VDD Minimum (IO H=-8mA) 10% of VDD Maximum (IO L=+8mA) Measured at 50% of waveform 50 5(%) over Nominal Frequency of 1.000MHz to 125.000MHz 50 10(%) over Nominal Frequency of 125.000001MHz to 175.000MHz Measured from 20% to 80% of waveform 2nSec Maximum 15pF Maximum LVCMOS Tri-State (Disabled Output: High Impedance) Power Down (Disabled Output: Logic Low) Spread Disable (Spread Spectrum On Output: Disabled) 70% of VDD Minimum or No Connect to Enable Output, 30% of VDD Maximum to Disable Output(Disabled Output: Logic Low) 70% of VDD Minimum or No Connect to Enable Output, 30% of VDD Maximum to Disable Output (Disabled Output: High Impedance) 50A Maximum (Disabled Output: Logic Low) 20mA Maximum (Disabled Output: High Impedance) 70% of VDD Minimum or No Connect to Enable Spread Spectrum On Output, 30% of VDD Maximum to Disable Spread Spectrum On Output (Spread Spectrum On Output: Disabled) 0.25% Center Spread (Not Available with Spread Disable Output Control Function) 0.50% Center Spread (Not Available with Spread Disable Output Control Function) 1.00% Center Spread (Not Available with Spread Disable Output Control Function) -0.50% Down Spread -1.00% Down Spread -2.00% Down Spread 30kHz Minimum, 32kHz Typical, 35kHz Maximum Cycle to Cycle; Spread Spectrum-On; Fo=133.333M, VDD=2.5VDC 40pSec Maximum 1ppm Maximum First Year 10mSec Maximum -55C to +125C Top of Page Mechanical Dimensions All Dimensions in Millimeters Pin 1: Power Down(Logic Low) Or Spread Disabled(Disabled) Or TriState(High Impedance) Pin 3: Output Pin 2: Ground Pin 4: Supply Voltage Top of Page Part Number Constructor / Request a Quote or Sample Please note that this form is intended to provide a listing of standard options. If you require an option or configuration that is not present here, you may want to fill out our Custom Oscillator Part Number Request Form. If you have any trouble with this form, or just have a suggestion as to how it might be improved, please contact our Webmaster. Enter your part number: - OR Frequency in Megahertz (1.000 to 87.000, 93.000 to 175.000 ): Frequency Tolerance/Stability: 100ppm Maximum over -20C to +70C Output Control Function: - Output Control Spread Spectrum Percentage: - Select Output Control First Packaging Options: Tape & Reel Top of Page Part Numbering Guide Top of Page Marking Specifications Line 1: XXXX or XXXXX l XXXX or XXXXX = Ecliptek Manufacturing Lot Code Top of Page Environmental & Mechanical Specifications Flammability: ESD Susceptibility: Mechanical Shock: Moisture Resistance: Moisture Sensitivity: Resistance to Soldering Heat: Resistance to Solvents: Solderability: Temperature Cycling: Thermal Shock: Vibration: UL94-V0 MIL-STD-883, Method MIL-STD-883, Method MIL-STD-883, Method J-STD-020, MSL 1 MIL-STD-202, Method MIL-STD-202, Method MIL-STD-883, Method package only) MIL-STD-883, Method MIL-STD-883, Method MIL-STD-883, Method 3015, Class 2, HBM: 2000V 2002, Condition G, 30,000G 1004 210, Condition K 215 2003 (Four I/O Pads on bottom of 1010, Condition B 1011, Condition B 2007, Condition A, 20G Top of Page Other Resources l l l l l l l l l l Download Specification (PDF) Frequently Asked Questions about EMS12 Series MEMS Clock Oscillators Test Circuit Recommended Solder Reflow Methods Recommended Solder Pad Layout Tape & Reel Packaging Option IBIS Model Oscillator Thermal Resistance Ecliptek RoHS Compliance Tools & Resources MEMS Clock Oscillator Qualification and Reliability (MTTF and FIT) Data Top of Page Category Oscillator Series EMS12 Package Plastic Voltage 2.5V Class OS6C Revision D 04-20-2010 [ All Content Copyright (c) 2011 Ecliptek Corporation | Legal Disclaimer| Privacy Policy ]