4
Device Selection Guide
Package Dimension (mm) White Package Description
1.6 (L) x 0.6 (W) x 1.0 (H) HSMW-C120 Untinted, Diused
1.6 (L) x 0.8 (W) x 0.35 (H) HSMW-C130 Untinted, Diused
1.6 (L) x 0.8 (W) x 0.6 (H) HSMW-C191 Untinted, Diused
1.6 (L) x 0.8 (W) x 0.4 (H) HSMW-C197 Untinted, Diused
3.4 (L) x 1.25 (W) x 1.1 (H)[2] HSMW-C265 Untinted, Diused
Notes:
1. Right angle package.
2. Reverse mount package.
Absolute Maximum Ratings at TA = 25˚C
Parameter HSMW-Cxxx Units
DC Forward Current[1] 20 mA
Power Dissipation 78 mW
Reverse Voltage (IR = 100 μA) 5 V
LED Junction Temperature 95 ˚C
Operating Temperature Range –40 to +85 ˚C
Storage Temperature Range –40 to +85 ˚C
Soldering Temperature See reow soldering prole (Figures 10 & 11)
Note:
1. Derate linearly as shown in Figure 4.
Electrical Characteristics at TA = 25˚C
Reverse
Forward Voltage Breakdown Capacitance C Thermal
V
F (Volts) VR (Volts) (pF), VF = 0, Resistance
@ IF = 20 mA[1] @ IR = 100 μA f = 1 MHz RTJ-PIN (˚C/W)
Part Number Typ. Max. Min. Typ. Typ.
HSMW-Cxxx 3.6 3.9 5 55 450
Note:
1. VF tolerance: ± 0.1 V.
Optical Characteristics at TA = 25˚C
Luminous
Intensity Chromaticity Luminous
I
v (mcd) Coordinates[2] Viewing Angle Ecacy
@ 20 mA[1, 4] Typ. 2 T1/2 Degrees[3] Kv (lm/w)
Part Number Min. Typ. x y Typ. Typ.
HSMW-C120 45 160 0.29 0.27 155 240
HSMW-C130 45 150 0.29 0.27 145 240
HSMW-C191 71.5 200 0.29 0.27 140 240
HSMW-C197 45 160 0.29 0.27 130 240
HSMW-C265 71.5 180 0.29 0.27 150 240
Notes:
1. The luminous intensity, Iv, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the
lamp package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ1/2 is the o-axis angle where the luminous intensity is 1/2 the peak intensity.
4. Luminous intensity (Iv) tolerance: ± 15%.