SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: IN-LINE CRIMP SPLICE DEVICE
IMMERSION RESISTANT
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: D-436-0148/-0150
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D981042 REPLACES:
D436014X
DRAWN BY:
M. FORONDA DATE: 06/23/98 PROD. REV.
SEE TABLE DOC ISSUE:
3 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
5 Holes Insert 5 Holes Assembly
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: natural.
3. CRIMP BARREL: Tin plated copper alloy. Color: see table.
APPLICATION
1. These controlled sealing systems are designed to make an immersion resistant multi-wire in-line splices made with wires having tin
or silverplated conductors and insulations rated for at least +125°C.
2. Parts may be used to splice up to 5 wires having an insulation less than ø2 (0.078) or up to 10 wires (2 per hole) with insulation less
than ø1 (0.039).
3. Temperature range: -55°C to +150°C.
4. For assembly instruction, see Raychem Installation Procedure RPIP-826-00.
For best results, prepare
the cable as shown:
* A trademark of Raychem Corpor ation.
Product Dimensions
Product Revision Crimp L A B CMA Stripe øC øG E F
Product Name Splice ref ref ref Range Color min min ref min
D-436-0148 A D-609-06 12.7
(0.500) 1.95
(0.077) 1.20
(0.047) 300-
1510 Red
D-436-0149 A D-609-07 14.6
(0.575) 2.65
(0.104) 1.65
(0.066) 779-
2880 Blue 7.60
(0.300) 2.00
(0.078) 7.50
(0.295) 8.90
(0.350)
D-436-0150 A D-609-08 14.6
(0.575) 3.80
(0.150) 2.55
(0.100) 1900-
6755 Yellow
