MCP111/112 Micropower Voltage Detector Package Types * Ultra-Low Supply Current: 1.75 A (Max.) * Precision Monitoring Options Of: - 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V, 4.38V and 4.63V * Resets Microcontroller in a Power-Loss Event * Active-Low VOUT Pin: - MCP111 Active-Low, Open-Drain - MCP112 Active-Low, Push-Pull * Available in SOT23-3, TO-92, SC-70 and SOT-89-3 Packages * Temperature Range: - Extended: -40C to +125C (except MCP1XX-195) - Industrial: -40C to +85C (MCP1XX-195 Only) * Pb-Free Devices 3-Pin SOT23-3/SC-70 VOUT 1 VSS 2 3-Pin SOT-89 VDD MCP111/112 Features 3 VDD MCP111/112 1 2 3 VOUT VDD VSS 3-Pin TO-92 VOUT VDD VSS Applications Block Diagram * Critical Microcontroller and Microprocessor Power-Monitoring Applications * Computers * Intelligent Instruments * Portable Battery-Powered Equipment VDD Comparator + General Description Output Driver - The MCP111/112 are voltage-detecting devices designed to keep a microcontroller in reset until the system voltage has stabilized at the appropriate level for reliable system operation. These devices also operate as protection from brown-out conditions when the system supply voltage drops below the specified threshold voltage level. Eight different trip voltages are available. VOUT Band Gap Reference VSS DEVICE FEATURES Output SOT-23/SC70 Package Pin Out (Pin # 1, 2, 3) Type Pull-up Resistor Reset Delay (typ.) MCP111 Open-drain External No VOUT, VSS, VDD Device Comment MCP112 Push-pull No No VOUT, VSS, VDD MCP102 Push-pull No 120 ms RST, VDD, VSS See MCP102/103/121/131 Data Sheet (DS20001906) MCP103 Push-pull No 120 ms VSS, RST, VDD See MCP102/103/121/131 Data Sheet (DS20001906) MCP121 Open-drain External 120 ms RST, VDD, VSS See MCP102/103/121/131 Data Sheet (DS20001906) MCP131 Open-Drain Internal (~95 k) 120 ms RST, VDD, VSS See MCP102/103/121/131 Data Sheet (DS20001906) 2004-2016 Microchip Technology Inc. DS20001889F-page 1 MCP111/112 1.0 ELECTRICAL CHARACTERISTICS Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings VDD...................................................................................7.0V Input current (VDD) .......................................................10 mA Output current (RST) ....................................................10 mA Rated Rise Time of VDD .............................................100V/s All inputs and outputs (except RST) w.r.t. VSS .............................................................. -0.6V to (VDD + 1.0V) RST output w.r.t. VSS ....................................... -0.6V to 13.5V Storage temperature .....................................65C to + 150C Ambient temp. with power applied ...............-40C to + 125C Maximum Junction temp. with power applied ............... 150C ESD protection on all pins 2 kV DC CHARACTERISTICS Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111), TA = -40C to +125C. Symbol Min. Typ. Max. Units Operating Voltage Range Parameters VDD 1.0 -- 5.5 V Specified VDD Value to VOUT low VDD 1.0 -- Operating Current IDD -- <1 1.75 A VDD Trip Point MCP1XX-195 VTRIP MCP1XX-240 MCP1XX-270 MCP1XX-290 MCP1XX-300 MCP1XX-315 MCP1XX-450 MCP1XX-475 VDD Trip Point Tempco Note 1: 2: 3: 4: TTPCO V Conditions I RST = 10 A, V RST < 0.2V 1.872 1.900 1.929 V TA = +25C (Note 1) 1.853 1.900 1.948 V TA = -40C to +85C (Note 2) 2.285 2.320 2.355 V TA = +25C (Note 1) 2.262 2.320 2.378 V Note 2 2.591 2.630 2.670 V TA = +25C (Note 1) 2.564 2.630 2.696 V Note 2 2.857 2.900 2.944 V TA = +25C (Note 1) 2.828 2.900 2.973 V Note 2 2.886 2.930 2.974 V TA = +25C (Note 1) 2.857 2.930 3.003 V Note 2 3.034 3.080 3.126 V TA = +25C (Note 1) 3.003 3.080 3.157 V Note 2 4.314 4.380 4.446 V TA = +25C (Note 1) 4.271 4.380 4.490 V Note 2 4.561 4.630 4.700 V TA = +25C (Note 1) 4.514 4.630 4.746 V Note 2 -- 100 -- ppm/ C Trip point is 1.5% from typical value. Trip point is 2.5% from typical value. This specification allows this device to be used in PIC(R) microcontroller applications that require the In-Circuit Serial ProgrammingTM (ICSPTM) feature (see device-specific programming specifications for voltage requirements). This specification DOES NOT allow a continuous high voltage to be present on the open-drain output pin (VOUT). The total time that the VOUT pin can be above the maximum device operational voltage (5.5V) is 100 sec. Current into the VOUT pin should be limited to 2 mA. It is recommended that the device operational temperature be maintained between 0C to 70C (+25C preferred). For additional information, please refer to Figure 2-28. This parameter is established by characterization and is not 100% tested. DS20001889F-page 2 2004-2016 Microchip Technology Inc. MCP111/112 DC CHARACTERISTICS (CONTINUED) Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111), TA = -40C to +125C. Parameters Threshold Hysteresis min. = 1%, max = 6%) Symbol MCP1XX-195 VHYS Min. Typ. Max. Units 0.019 -- 0.114 V MCP1XX-240 0.023 -- 0.139 V MCP1XX-270 0.026 -- 0.158 V MCP1XX-290 0.029 -- 0.174 V MCP1XX-300 0.029 -- 0.176 V MCP1XX-315 0.031 -- 0.185 V MCP1XX-450 0.044 -- 0.263 V MCP1XX-475 0.046 -- 0.278 V Conditions TA = +25C VOUT Low-level Output Voltage VOL -- -- 0.4 V IOL = 500 A, VDD = VTRIP(MIN) VOUT High-level Output Voltage VOH VDD - 0.6 -- -- V IOH = 1 mA, For only MCP112 (push-pull output) Open-drain High Voltage on Output VODH -- -- 13.5 (3) V MCP111 only, VDD = 3.0V, Time voltage > 5.5V applied 100s, current into pin limited to 2 mA, +25C operation recommended Note 3, Note 4 Open-drain Output Leakage Current (MCP111 only) IOD -- 0.1 -- A Note 1: 2: 3: 4: Trip point is 1.5% from typical value. Trip point is 2.5% from typical value. This specification allows this device to be used in PIC(R) microcontroller applications that require the In-Circuit Serial ProgrammingTM (ICSPTM) feature (see device-specific programming specifications for voltage requirements). This specification DOES NOT allow a continuous high voltage to be present on the open-drain output pin (VOUT). The total time that the VOUT pin can be above the maximum device operational voltage (5.5V) is 100 sec. Current into the VOUT pin should be limited to 2 mA. It is recommended that the device operational temperature be maintained between 0C to 70C (+25C preferred). For additional information, please refer to Figure 2-28. This parameter is established by characterization and is not 100% tested. 2004-2016 Microchip Technology Inc. DS20001889F-page 3 MCP111/112 VTRIP 1V VDD tRPU tRPD VOH 1V VOL VOUT tRT FIGURE 1-1: Timing Diagram. AC CHARACTERISTICS Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111), TA = -40C to +125C. Parameters Symbol Min. Typ. Max. Units VDD Detect to VOUT Inactive tRPU -- 90 -- s Figure 1-1 and CL = 50 pF (Note 1) VDD Detect to VOUT Active tRPD -- 130 -- s VDD ramped from VTRIP(MAX) + 250 mV down to VTRIP(MIN) - 250 mV, per Figure 1-1, CL = 50 pF (Note 1) tRT -- 5 -- s For VOUT 10% to 90% of final value per Figure 1-1, CL = 50 pF (Note 1) VOUT Rise Time After VOUT Active Note 1: Conditions These parameters are for design guidance only and are not 100% tested. TEMPERATURE CHARACTERISTICS Electrical Specifications: Unless otherwise noted, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (MCP111 only), TA = -40C to +125C. Parameters Symbol Min. Typ. Max. Units Conditions Specified Temperature Range TA -40 -- +85 C MCP1XX-195 Specified Temperature Range TA -40 -- +125 C Except MCP1XX-195 Maximum Junction Temperature TJ -- -- +150 C Storage Temperature Range TA -65 -- +150 C Temperature Ranges Package Thermal Resistances Thermal Resistance, 3L-SOT23 JA -- 336 -- C/W Thermal Resistance, 3L-SC-70 JA -- 340 -- C/W Thermal Resistance, 3L-TO-92 JA -- 131.9 -- C/W Thermal Resistance, 3L-SOT-89 JA -- 110 -- C/W DS20001889F-page 4 2004-2016 Microchip Technology Inc. MCP111/112 2.0 TYPICAL PERFORMANCE CURVES Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. Note: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111; see Figure 4-1), TA = -40C to +125C. 1.6 1.6 MCP111-195 5.5V 5.0V 1.4 1.4 1.2 1.2 4.0V 1 0.8 IDD (uA) IDD (uA) MCP111-195 2.8V 2.1V 1.7V 0.6 0.4 +85C 0.8 0.6 -40C 0.4 1.0V 0.2 +125C 1 +25C 0.2 0 140 120 100 80 60 40 20 0 -20 -40 0 1.0 2.0 3.0 FIGURE 2-1: (MCP111-195). FIGURE 2-4: IDD vs. Temperature 1 5.0V 0.8 4.0V 0.6 2.8V 1.7V IDD vs. VDD (MCP111-195). 1.2 2.1V 1 +125C 0.8 +85C 0.6 -40C 0.4 0.2 1.0V 0.2 0 +25C 140 120 100 80 60 40 20 0 -20 -40 0 1.0 2.0 3.0 FIGURE 2-5: IDD vs. Temperature FIGURE 2-2: (MCP112-300). 4.0 5.0 6.0 VDD (V) Temperature (C) IDD vs. VDD (MCP112-300). 1.6 MCP112-475 1.4 5.5V MCP112-475 2.1V 2.8V 1.7V IDD (uA) 1.2 4.0V 5.0V 1 0.8 +125C 0.6 +85C 0.4 -40C 0.2 1.0V +25C 140 120 100 80 60 40 20 0 -20 0 -40 IDD (uA) 6.0 MCP112-300 1.4 0.4 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 5.0 1.6 5.5V MCP112-300 IDD (uA) IDD (uA) 1.2 4.0 VDD (V) Temperature (C) 1.0 IDD vs. Temperature 2004-2016 Microchip Technology Inc. 3.0 4.0 5.0 6.0 VDD (V) Temperature (C) FIGURE 2-3: (MCP112-475). 2.0 FIGURE 2-6: IDD vs. VDD (MCP112-475). DS20001889F-page 5 MCP111/112 Note: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111; see Figure 4-1), TA = -40C to +125C. 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0.000 140 0.100 VTRIP, V increasing MCP111-195 max temp is +85C VTRIP, V decreasing -60 -10 40 90 MCP111-195 VDD = 1.7V 0.080 VOL (V) VHYS, Hysteresis Hyst (V) VTRIP (V) 0.120 1.950 1.945 1.940 1.935 1.930 1.925 1.920 1.915 1.910 1.905 1.900 1.895 +125C 0.060 +85C 0.040 -40C 0.020 +25C 0.000 0.00 0.25 Temperature (C) 0.50 0.75 1.00 IOL (mA) FIGURE 2-10: VOL vs. IOL (MCP111-195 @ VDD = 1.7V). FIGURE 2-7: VTRIP and VHYST vs. Temperature (MCP111-195). 0.080 3.020 VTRIP (V) 3.000 VHYS, Hysteresis 2.980 MCP112-300 2.960 2.940 2.920 VTRIP, V decreasing 2.900 -60 -10 40 90 0.100 0.098 0.096 0.094 0.092 0.090 0.088 0.086 0.084 0.082 140 0.070 MCP112-300 VDD = 2.7V 0.060 VOL (V) VTRIP, V increasing Hyst (V) 3.040 0.050 +125C 0.040 +85C 0.030 0.020 -40C +25C 0.010 0.000 0.00 0.25 Temperature (C) 0.050 0.180 VTRIP, V increasing 0.170 0.160 0.150 0.140 MCP112-475 0.130 0.120 20 60 100 0.100 140 Temperature (C) FIGURE 2-9: VTRIP and VHYST vs. Temperature (MCP112-475). DS20001889F-page 6 1.00 MCP112-475 VDD = 4.4V +125C 0.030 0.020 +85C -40C 0.010 +25C 0.110 VTRIP, V decreasing -20 0.040 VOL (V) VHYS, Hysteresis -60 0.75 FIGURE 2-11: VOL vs. IOL (MCP112-300 @ VDD = 2.7V). Hyst (V) VTRIP (V) FIGURE 2-8: VTRIP and VHYST vs. Temperature (MCP112-300). 4.800 4.780 4.760 4.740 4.720 4.700 4.680 4.660 4.640 4.620 4.600 4.580 0.50 IOL (mA) 0.000 0.00 0.25 0.50 0.75 1.00 IOL (mA) FIGURE 2-12: VOL vs. IOL (MCP112-475 @ VDD = 4.4V). 2004-2016 Microchip Technology Inc. MCP111/112 Note: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111; see Figure 4-1), TA = -40C to +125C. 0.120 MCP111-195 VDD = 1.7 V 0.100 VOH (V) IOL = 0.50 mA 0.060 0.040 MCP112-300 VDD = 3.1V 3.100 IOL = 0.75 mA 0.080 VOL (V) 3.150 IOL = 1.00 mA -40 C 3.050 +25 C 3.000 IOL = 0.25 mA +85 C 2.950 0.020 IOL = 0.00 mA +125 C 0.000 -40 0 40 80 2.900 0.00 120 0.25 Temperature (C) 0.080 4.820 MCP112-300 VDD = 2.7V 4.800 IOL = 0.50 mA 0.030 VOH (V) VOL (V) 4.780 IOL = 0.75 mA 0.050 0.040 IOL = 0.25 mA 0.020 0.010 80 -40 C 4.740 +85 C 4.700 +125 C 0.000 40 +25 C 4.760 4.720 IOL = 0.00 mA 0 4.680 0.00 120 0.25 Temperature (C) 0.030 IOL = 0.50 mA 0.020 IOL = 0.25 mA 0.010 IOL = 0.00 mA 0.000 40 80 120 Transient Duration (s) VOL (V) IOL = 0.75 mA 0 500 400 1 10 MCP111-195 MCP112-300 300 200 MCP112-475 100 0 0.001 FIGURE 2-15: VOL vs. Temperature (MCP112-475 @ VDD = 4.4V). 0.01 0.1 VTRIP(min) - VDD Temperature (C) 2004-2016 Microchip Technology Inc. 1.00 600 0.040 -40 0.75 FIGURE 2-17: VOH vs. IOH (MCP112-475 @ VDD = 4.8V). IOL = 1.00 mA MCP112-475 VDD = 4.4V 0.50 IOL (mA) FIGURE 2-14: VOL vs. Temperature (MCP112-300 @ VDD = 2.7V). 0.050 1.00 MCP112-475 VDD = 4.8V IOL = 1.00 mA 0.060 -40 0.75 FIGURE 2-16: VOH vs. IOH (MCP112-300 @ VDD = 3.1V). FIGURE 2-13: VOL vs. Temperature (MCP111-195 @ VDD = 1.7V). 0.070 0.50 IOL (mA) FIGURE 2-18: (25 C). Typical Transient Response DS20001889F-page 7 MCP111/112 Note: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111; see Figure 4-1), TA = -40C to +125C. 400 350 300 350 VDD decreasing from: VTRIP(max) + 0.25V to VTRIP(min) - 0.25V 200 150 tRPU (s) 300 250 tRPD (s) MCP111-195 MCP111-195 VDD decreasing from: 5V - 1.7V 100 200 150 VDD increasing from: 0V - 2.8V 100 VDD decreasing from: 5V - 0V 50 VDD increasing from: 0V - 2.1V 250 50 VDD increasing from: 0V - 5.5V 0 0 -40 -15 10 35 60 85 -40 110 -15 10 Temperature (C) FIGURE 2-19: (MCP111-195). tRPD vs. Temperature FIGURE 2-22: (MCP111-195). VDD decreasing from: VTRIP(max) + 0.25V to VTRIP(min) - 0.25V 110 MCP112-300 100 100 tRPU (s) tRPD (s) 85 tRPU vs. Temperature VDD increasing from: 0V - 3.1V 120 120 VDD decreasing from: 5V - 2.7V 80 60 VDD increasing from: 0V - 3.3V 80 60 VDD increasing from: 0V - 4.0V 40 40 VDD decreasing from: 5V - 0V 20 0 VDD increasing from: 0V - 5.5V 0 -40 -15 10 35 60 85 110 -40 -15 Temperature (C) FIGURE 2-20: (MCP112-300). 10 35 60 85 110 Temperature (C) tRPD vs. Temperature FIGURE 2-23: (MCP112-300). tRPU vs. Temperature 250 250 MCP112-475 MCP112-475 VDD increasing from: 0V - 4.9V 200 tRPU (s) VDD decreasing from: 5V - 4.4V 200 tRPD (s) 60 140 MCP112-300 140 150 100 35 Temperature (C) 160 20 VDD increasing from: 0V - 4.0V VDD decreasing from: VTRIP(max) + 0.25V to VTRIP(min) - 0.25V 150 VDD increasing from: 0V - 5.0V 100 VDD increasing from: 0V - 5.5V 50 50 VDD decreasing from: 5V - 0V 0 0 -40 -15 FIGURE 2-21: (MCP112-475). DS20001889F-page 8 10 35 60 Temperature (C) 85 110 tRPD vs. Temperature -40 -15 10 35 60 85 110 Temperature (C) FIGURE 2-24: (MCP112-475). tRPU vs. Temperature 2004-2016 Microchip Technology Inc. MCP111/112 Note: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 k (only MCP111; see Figure 4-1), TA = -40C to +125C. 0.1500 60 0.1400 VDD increasing from: 0V - 2.1V 45 VDD increasing from: 0V - 5.5V 40 VDD increasing from: 0V - 4.0V 35 0.1200 VDD increasing from: 0V - 4.9V 0.1100 VDD increasing from: 0V - 5.5V 0.1000 30 VDD increasing from: 0V - 2.8V 25 0.0900 20 VDD increasing from: 0V - 4.8V 0.0800 -40 -15 10 35 60 85 110 -40 -15 10 Temperature (C) 0.4 0.35 0.3 FIGURE 2-27: (MCP112-475). tRT vs. Temperature VDD increasing from: 0V - 3.1V VDD increasing from: 0V - 3.3V 0.25 0.2 VDD increasing from: 0V - 5.5V 0.15 VDD increasing from: 0V - 4.0V 0.1 0.05 MCP112-300 0 -40 -15 10 35 60 85 Temperature (C) FIGURE 2-26: (MCP112-300). tRT vs. Temperature 2004-2016 Microchip Technology Inc. 35 60 85 110 Temperature (C) 110 tRT vs. Temperature 1.E-02 10m 1.E-03 1m 1.E-04 100 1.E-05 10 1.E-06 1 1.E-07 100n 1.E-08 10n 1.E-09 1n 1.E-10 100p 1.E-11 10p 1.E-12 1p 1.E-13 100f Open-Drain Leakage (A) FIGURE 2-25: (MCP111-195). tRT (s) VDD increasing from: 0V - 5.0V 0.1300 tRT (s) 50 tRT (s) MCP112-475 MCP111-195 55 125C 25C - 40C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pull-Up Voltage (V) FIGURE 2-28: Open-Drain Leakage Current vs. Voltage Applied to VOUT Pin (MCP111-195). DS20001889F-page 9 MCP111/112 3.0 PIN DESCRIPTION The descriptions of the pins are listed in Table 3-1. TABLE 3-1: PIN FUNCTION TABLE Pin Number Symbol SOT-23-3 SC-70 SOT-89-3 T0-92 1 1 1 VOUT Function Output State VDD Falling: H = VDD > VTRIP L = VDD < VTRIP VDD Rising: H = VDD > VTRIP + VHYS L = VDD < VTRIP + VHYS 2 3 3 VSS Ground reference 3 2 2 VDD Positive power supply -- 4 -- VDD Positive power supply DS20001889F-page 10 2004-2016 Microchip Technology Inc. MCP111/112 4.0 APPLICATION INFORMATION 4.1 For many of today's microcontroller applications, care must be taken to prevent low-power conditions that can cause many different system problems. The most common causes is a brown-out condition, where the system supply drops below the operating level momentarily. The second most common cause is when a slowly decaying power supply causes the microcontroller to begin executing instructions without sufficient voltage to sustain SRAM, thus producing indeterminate results. Figure 4-1 shows a typical application circuit. VTRIP Operation The voltage trip point (VTRIP) is determined on the falling edge of VDD. The actual voltage trip point (VTRIPAC) will be between the minimum trip point (VTRIPMIN) and the maximum trip point (VTRIPMAX). There is a hysteresis on this trip point to remove any "jitter" that would occur on the VOUT pin when the device VDD is at the trip point. Figure 4-2 shows the state of the VOUT pin as determined by the VDD voltage. The VTRIP specification is for falling VDD voltages. When the VDD voltage is rising, the VOUT pin will not be driven high until VDD is at VTRIP + VHYS. VDD 0.1 F 3 VDD VDD RPU MCP11X (1) VOUT 1 VSS PIC(R) Microcontroller MCLR (Reset Input) GND 2 Note 1: RPU may be required with the MCP111 due to the open-drain output. Resistor RPU is not required with the MCP112. FIGURE 4-1: VDD Typical Application Circuit. VTRIPAC + VHYSAC VTRIPMAX VTRIPAC VTRIPMIN VTRIPAC 1V VOUT < 1 V is outside the device specifications FIGURE 4-2: 4.2 VOUT Operation as Determined by the VTRIP and VHYS. Negative Going VDD Transients The minimum pulse width (time) required to cause a reset may be an important criteria in the implementation of a Power-on Reset (POR) circuit. This time is referred to as transient duration, defined as the amount of time needed for these supervisory devices to respond to a drop in VDD. The transient duration time is dependent on the magnitude of VTRIP - VDD. Generally speaking, the transient duration decreases with increases in VTRIP - VDD. 2004-2016 Microchip Technology Inc. Figure 4-3 shows a typical transient duration vs. reset comparator overdrive for which the MCP111/112 will not generate a reset pulse. It shows that the farther below the trip point the transient pulse goes, the duration of the pulse required to cause a reset gets shorter. Figure 2-18 shows the transient response characteristics for the MCP111/112. A 0.1 F bypass capacitor, mounted as close as possible to the VDD pin, provides additional transient immunity (refer to Figure 4-1). DS20001889F-page 11 MCP111/112 4.3 Supply Voltage 5V 0V VTRIP(MAX) VTRIP(MIN) VTRIP(MIN) - VDD tTRANS Time (s) Effect of Temperature on Time-Out Period (tRPU) The time-out period (tRPU) determines how long the device remains in the reset condition. This is affected by both VDD and temperature. The graph shown in Figures 2-22, 2-23 and 2-24 show the typical response for different VDD values and temperatures. Using in PIC(R) Microcontroller ICSPTM Applications (MCP111 only) 4.4 FIGURE 4-3: Example of Typical Transient Duration Waveform. Figure 4-4 shows the typical application circuit for using the MCP111 for voltage supervisory function when the PIC microcontroller will be programmed via the In-Circuit Serial ProgrammingTM (ICSP) feature. Additional information is available in TB087, "Using Voltage Supervisors with PIC(R) Microcontroller Systems which Implement In-Circuit Serial ProgrammingTM", DS91087. Note: It is recommended that the current into the RST pin be current limited by a 1 k resistor. VDD/VPP 0.1 F RPU VDD MCP111 RST VSS 1 k VDD PIC(R) MCU MCLR (reset input) (Active-Low) VSS FIGURE 4-4: Typical Application Circuit for PIC(R) Microcontroller with the ICSPTM feature. DS20001889F-page 12 2004-2016 Microchip Technology Inc. MCP111/112 5.0 PACKAGING INFORMATION 5.1 Package Marking Information 3-Lead TO-92 Example: XXXXXX XXXXXX XXXXXX YWWNNN Device Code MCP111-240E/TO 240E MCP111-270E/TO 270E MCP111-290E/TO 290E MCP111-300E/TO 300E MCP111-315E/TO 315E MCP111-450E/TO 450E MCP111-475E/TO 475E MCP111-195I/TO 195I Example: 3-Lead SOT-23 Device XXNN Legend: XX...X Y WW NNN e3 * Note: MCP111 240E TO^^ e3 626256 Code MCP111T-195I/TT MPNN MCP111T-240ETT MQNN MCP111T-270E/TT MGNN MCP111T-290E/TT NHNN MCP111T-300E/TT MJNN MCP111T-315E/TT MKNN MCP111T-450E/TT MLNN MCP111T-475E/TT MMNN MCP112T-195I/TT MRNN MCP112T-240ETT MSNN MCP112T-270E/TT MANN MCP112T-290E/TT MBNN MCP112T-300E/TT MCNN MCP112T-315E/TT MDNN MCP112T-450E/TT MENN MCP112T-475E/TT MFNN MP25 Customer-specific information Year code (last digit of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code Pb-free JEDEC designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. 2004-2016 Microchip Technology Inc. DS20001889F-page 13 MCP111/112 Package Marking Information (Continued) 3-Lead SC-70 Example: Device Code MCP111T-195I/LB EPNN MCP111T-240E/LB EQNN MCP111T-270E/LB EGNN MCP111T-290E/LB EHNN MCP111T-300E/LB EJNN MCP111T-315E/LB EKNN MCP111T-450E/LB ELNN MCP111T-475E/LB EMNN MCP112T-195I/LB ERNN MCP112T-240E/LB ESNN MCP112T-270E/LB EANN MCP112T-290E/LB EBNN MCP112T-300E/LB ECNN MCP112T-315E/LB EDNN MCP112T-450E/LB EENN MCP112T-475E/LB EFNN 3-Lead SOT-89 Example: Device MCP111T-195I/MB NNN DS20001889F-page 14 EP25 Code MP MCP111T-240EMB MQ MCP111T-270E/MB MG MCP111T-290E/MB NH MCP111T-300E/MB MJ MCP111T-315E/MB MK MCP111T-450E/MB ML MCP111T-475E/MB MM MCP112T-195I/MB MR MCP112T-240EMB MS MCP112T-270E/MB MA MCP112T-290E/MB MB MCP112T-300E/MB MC MCP112T-315E/MB MD MCP112T-450E/MB ME MCP112T-475E/MB MF MP1626 256 2004-2016 Microchip Technology Inc. MCP111/112 /HDG3ODVWLF7UDQVLVWRU2XWOLQH 72 >72@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ E A N 1 L 1 2 3 b e c D R 8QLWV 'LPHQVLRQ/LPLWV 1XPEHURI3LQV ,1&+(6 0,1 1 0$; 3LWFK H %RWWRPWR3DFNDJH)ODW ' %6& 2YHUDOO:LGWK ( 2YHUDOO/HQJWK $ 0ROGHG3DFNDJH5DGLXV 5 7LSWR6HDWLQJ3ODQH / /HDG7KLFNQHVV F /HDG:LGWK E 1RWHV 'LPHQVLRQV$DQG(GRQRWLQFOXGHPROGIODVKRUSURWUXVLRQV0ROGIODVKRUSURWUXVLRQVVKDOOQRWH[FHHGSHUVLGH 'LPHQVLRQLQJDQGWROHUDQFLQJSHU$60(<0 %6& %DVLF'LPHQVLRQ7KHRUHWLFDOO\H[DFWYDOXHVKRZQZLWKRXWWROHUDQFHV 0LFURFKLS 7HFKQRORJ\ 'UDZLQJ &% 2004-2016 Microchip Technology Inc. DS20001889F-page 15 MCP111/112 /HDG3ODVWLF6PDOO2XWOLQH7UDQVLVWRU 77 >627@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ b N E E1 2 1 e e1 D c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page 16 2004-2016 Microchip Technology Inc. MCP111/112 Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging 2004-2016 Microchip Technology Inc. DS20001889F-page 17 MCP111/112 3-Lead Plastic Small Outline Transistor (LB) [SC70] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging D A e e 2 B 1 E1 E 2X 0.15 C N 2X 3X TIPS 0.30 C 0.15 C 3X b 0.10 C A B TOP VIEW C c A2 A SEATING PLANE A1 L SIDE VIEW END VIEW Microchip Technology Drawing C04-060C Sheet 1 of 2 DS20001889F-page 18 2004-2016 Microchip Technology Inc. MCP111/112 3-Lead Plastic Small Outline Transistor (LB) [SC70] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Units Dimension Limits Number of Pins N e Pitch Overall Height A Standoff A1 Molded Package Thickness A2 Overall Length D Exposed Pad Length D2 Overall Width E Exposed Pad Width E1 b Terminal Width Terminal Length L c Lead Thickness MIN 0.80 0.00 0.80 2.50 0.15 0.10 0.20 MILLIMETERS NOM 3 0.65 BSC 2.00 BSC 2.60 2.10 BSC 1.25 BSC 0.20 - MAX 1.10 0.10 1.00 2.70 0.40 0.46 0.26 Notes: 1. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm per side. 2. Dimensioning and tolerancing per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances. REF: Reference Dimension, usually without tolerance, for information purposes only. Microchip Technology Drawing C04-060C Sheet 2 of 2 2004-2016 Microchip Technology Inc. DS20001889F-page 19 MCP111/112 3-Lead Plastic Small Outline Transistor (LB) [SC70] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging E 2 1 SILK SCREEN C G Y 3 X RECOMMENDED LAND PATTERN Units Dimension Limits Contact Pitch E Contact Pad Spacing C Contact Pad Width X Contact Pad Length Y Distance Between Pads G MIN MILLIMETERS NOM 0.65 BSC 2.20 MAX 0.50 0.85 1.25 Notes: 1. Dimensioning and tolerancing per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances. Microchip Technology Drawing No. C04-2060B DS20001889F-page 20 2004-2016 Microchip Technology Inc. MCP111/112 3-Lead Plastic Small Outline Transistor (MB) - [SOT-89] Note: )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ ' $ % ; & ( ( + & ; H & H H & $ SEATING PLANE F ;E & $ % E / '$ '% '& 237,21$/%$&.6,'(3$77(516 3$5760$<%(6833/,(':,7+ $1<3$77(516+2:1 0LFURFKLS7HFKQRORJ\'UDZLQJ&&6KHHWRI 2004-2016 Microchip Technology Inc. DS20001889F-page 21 MCP111/112 3-Lead Plastic Small Outline Transistor (MB) - [SOT-89] Note: )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ 8QLWV 'LPHQVLRQ/LPLWV 1XPEHURI/HDGV 1 H 3LWFK H 2XWVLGH/HDG3LWFK 2YHUDOO+HLJKW $ 2YHUDOO:LGWK + 0ROGHG3DFNDJH:LGWKDW%DVH ( 0ROGHG3DFNDJH:LGWKDW7RS ( 2YHUDOO/HQJWK ' '$ 7DE/HQJWK 2SWLRQ$ '% 7DE/HQJWK 2SWLRQ% 7DE/HQJWK 2SWLRQ& '& )RRW/HQJWK / F /HDG7KLFNQHVV E /HDG:LGWK E /HDGV :LGWK 0,//,0(7(56 0,1 120 %6& %6& %6& %6& 0$; Notes: 'LPHQVLRQV'DQG(GRQRWLQFOXGHPROGIODVKRUSURWUXVLRQV0ROGIODVKRU SURWUXVLRQVVKDOOQRWH[FHHGPPSHUVLGH 'LPHQVLRQLQJDQGWROHUDQFLQJSHU$60(<0 %6&%DVLF'LPHQVLRQ7KHRUHWLFDOO\H[DFWYDOXHVKRZQZLWKRXWWROHUDQFHV 0LFURFKLS7HFKQRORJ\'UDZLQJ&&6KHHWRI2 DS20001889F-page 22 2004-2016 Microchip Technology Inc. MCP111/112 3-Lead Plastic Small Outline Transistor (MB) - [SOT-89] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging X1 X2 Y1 Y3 Y4 Y2 Y G X SILK SCREEN C RECOMMENDED LAND PATTERN Units Dimension Limits C X (3 PLACES) X1 X2 (2 PLACES) G (2 PLACES) Y (2 PLACES) Y1 Y2 Y3 Y4 MIN MILLIMETERS NOM 1.50 (BSC) 0.900 1.733 0.416 0.600 1.300 3.125 1.475 0.825 1.000 MAX Notes: 1. Dimensioning and tolerancing per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances. Microchip Technology Drawing C04-2029C 2004-2016 Microchip Technology Inc. DS20001889F-page 23 MCP111/112 5.2 Product Tape and Reel Specifications Top Cover Tape A0 W B0 K0 P FIGURE 5-1: Embossed Carrier Dimensions (8, 12, 16 and 24 mm tape only). CARRIER TAPE/CAVITY DIMENSIONS Case Outline Carrier Dimensions Package Type Cavity Dimensions W mm P mm A0 mm B0 mm K0 mm Output Quantity Units Reel Diameter in mm TT SOT-23B 3L 8 4 3.15 2.77 1.22 3000 180 LB SC-70 3L 8 4 2.4 2.4 1.19 3000 180 User Direction of Feed Device Marking W PIN 1 P Standard Reel Component Orientation FIGURE 5-2: DS20001889F-page 24 3-Lead SOT-23/SC70 Device Tape and Reel Specifications. 2004-2016 Microchip Technology Inc. MCP111/112 User Direction of Feed P Device Marking MARK MARK MARK FACE FACE FACE Seal Tape Back Tape Note: W Bent leads are for Tape and Reel only. FIGURE 5-3: TO-92 Devices. User Direction of Feed Pin 1 Pin 1 P, Pitch Standard Reel Component Orientation FIGURE 5-4: W, Width of Carrier Tape Reverse Reel Component Orientation SOT-89 Devices. 2004-2016 Microchip Technology Inc. DS20001889F-page 25 MCP111/112 NOTES: DS20001889F-page 26 2004-2016 Microchip Technology Inc. MCP111/112 APPENDIX A: REVISION HISTORY Revision F (July 2016) The following is the list of modifications: 1. 2. 3. Updated Table 3-1. Updated Section 5.0 "Packaging information". Minor typographical corrections. Revision E (January 2013) * Added a note to each package outline drawing. Revision D (June 2005) 1. Added SOT-89-3 throughout. package information Revision C (March 2005) The following is the list of modifications: 1. 2. 3. 4. 5. 6. Added Section 4.4 "Using in PIC(R) Microcontroller ICSPTM Applications (MCP111 only)" on using the MCP111 in PIC microcontroller ICSP applications. Added VODH specifications in Section 1.0 "Electrical Characteristics" (for ICSP applications). Added Figure 2-28. Added devices features table to page 1. Updated SC-70 package markings and added Pb-free marking information to Section 5.0 "Packaging information". Added Appendix A: "Revision History". Revision B (August 2004) 1. Corrected package marking information in Section 5.0 "Packaging information". Revision A (May 2004) * Original release of this document. 2004-2016 Microchip Technology Inc. DS20001889F-page 27 MCP111/112 NOTES: DS20001889F-page 28 2004-2016 Microchip Technology Inc. MCP111/112 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. Device X XXX X XX Tape/Reel Monitoring Temperature Package Range Option Options Examples: a) b) Device: MCP111: MicroPower Voltage Detector, open-drain MCP111T: MicroPower Voltage Detector, open-drain (Tape and Reel) MCP112: MicroPower Voltage Detector, push-pull MCP112T: MicroPower Voltage Detector, push-pull (Tape and Reel) c) d) Monitoring Options: Temperature Range: Package: 195 240 270 290 300 315 450 475 = = = = = = = = 1.90V 2.32V 2.63V 2.90V 2.93V 3.08V 4.38V 4.63V I E = -40C to +85C (MCP11X-195 only) = -40C to +125C (Except MCP11X-195 only) LB MB TO TT = = = = SC-70, 3-lead SOT-89, 3-lead TO-92, 3-lead SOT-23B, 3-lead 2004-2016 Microchip Technology Inc. a) b) c) d) MCP111T-195I/TT: Tape and Reel, 1.95V option, open-drain, -40C to +85C, SOT-23B package. MCP111T-315E/LB: Tape and Reel, 3.15V option, open-drain, -40C to +125C, SC-70-3 package. MCP111-300E/TO: 3.00V option, open-drain, -40C to +125C, TO-92-3 package. MCP111-315E/MB: 3.15V option, open-drain, -40C to +125C, SOT-89-3 package. MCP112T-290E/TT: Tape and Reel, 2.90V option, push-pull, 40C to +125C, SOT-23B-3 package. MCP112T-475E/LB: Tape and Reel, 4.75V option, push-pull, -40C to +125C, SC-70-3 package. MCP112-450E/TO: 4.5V option, push-pull, -40C to +125C, TO-92-3 package. MCP112-315E/MB: 3.15V option, push-pull, -40C to +125C, SOT-89-3 package. DS20001889F-page 29 MCP111/112 NOTES: DS20001889F-page 30 2004-2016 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: * Microchip products meet the specification contained in their particular Microchip Data Sheet. * Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. * There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. * Microchip is willing to work with the customer who is concerned about the integrity of their code. * Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated. Trademarks The Microchip name and logo, the Microchip logo, AnyRate, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. ClockWorks, The Embedded Control Solutions Company, ETHERSYNCH, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker, Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC(R) MCUs and dsPIC(R) DSCs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified. QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == 2004-2016 Microchip Technology Inc. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. (c) 2004-2016, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN: 978-1-5224-0860-4 DS20001889F-page 31 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Germany - Dusseldorf Tel: 49-2129-3766400 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Hong Kong Tel: 852-2943-5100 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 Austin, TX Tel: 512-257-3370 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-695-1980 Fax: 905-695-2078 China - Dongguan Tel: 86-769-8702-9880 China - Guangzhou Tel: 86-20-8755-8029 China - Hangzhou Tel: 86-571-8792-8115 Fax: 86-571-8792-8116 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 Germany - Karlsruhe Tel: 49-721-625370 India - Pune Tel: 91-20-3019-1500 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Italy - Venice Tel: 39-049-7625286 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Poland - Warsaw Tel: 48-22-3325737 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Taiwan - Kaohsiung Tel: 886-7-213-7828 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 06/23/16 DS20001889F-page 32 2004-2016 Microchip Technology Inc.