Single Pole Power Connectors RIG-Power Connectors (1000v AC/DC) Ampacity (Using 535 MCM) Ampacity (Using 777 MCM) 900 1135 Wire Range 444 -777 kcmil Connector Style Insert Gender Part Number* Plug w/ Mech. Clamp Dead Front Pin (Line side) RIG-10P-M- Plug w/ Mech. Clamp Socket Contact (Load Side) RIG-10S-M- Cable Receptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-15P-M- Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-15S-M- Fixed Cable Receptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-17P-M- Fixed Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-17S-M- Panel Mount Receptacle (Bus Bar) Dead Front Pin (Line side) RIG-17PR- Panel Mount Receptacle (Bus Bar) Socket Contact (Load Side) RIG-17SR- Panel Mount Receptacle (Direct Cable Entry) Dead Front Pin (Line side) RIG-17PN- Panel Mount Receptacle (Direct Cable Entry) Socket Contact (Load Side) RIG-17SN- Select Cable Size: (4=444 kcmil, 5=535 MCM, 6 = 646 MCM, 7=777 MCM) Select Grommet Number from Chart Below * For Basketweave Grip substitute K for M Use Crimp Tool: Anderson (Square D) Versa Crimp # VC8 NOTE: See page 19, shell size C24 for full mounting dimensions. PANEL MOUNT RECEPTACLE RIG-17X RIG-POWER Grommet Selection Guide Cable Diameter Code No.(XX) 1.000-1.125 18 1.125-1.250 20 1.250-1.375 22 1.375-1.500 24 1.500-1.625 26 1.625-1.750 28 1.750-1.875 30 Color Code Options Current Type Standard Color Code Part No. Suffix DC Blue -BL Orange -OR AC Yellow -Y Brown -BR 72 Red -R White -W Black -BK Green -G Amphenol I N D U ST R I A L P-500TM / PD-501 POWER Connectors Ampacity Wire Size Type of Termination Gender Part Number Boot Part # (See Color Code) Cable Sealing Range 900* 900* 900* 325 ------ 535MCM 535MCM 313MCM Stud Solder Crimp Solder Socket Pin Pin Pin P-500126-BS- PD-501-L P-500126-P PD-501-S ------- TMPC-10- TMPC-10- TMPC-10- ------- 1.125 - 1.500 1.125 - 1.500 1.125 - 1.500 Note: Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers. Copper alloy, silver plated contacts for maximum conductivity. Crimp tool required for P-500126-P is Thomas & Betts hex crimp using Tool # 13642M & Die #11747. * When used with 125 C-rated cable. TMPCTM Connectors Gender Type of Termination Current Range Part Number Wire Size Boot Part No. Cable Sealing Range Socket Socket Pin Pin 7/8" Stud/Panel board 2 Hole Bus Bar Crimp Crimp 900-1135 amps 900-1135 amps 900 amps 900-1135 amps TMPC-41777-L- TMPC-41777-24L TPMC-40535-L TPMC-40777-L n/a n/a 444 - 535 kcmil 646-777 kcmil n/a n/a TMPC-10- TMPC-10- n/a n/a 1.125 - 1.500 1.125 - 1.500 Note: TPMC Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers. Material is Copper alloy, silver plated for maximum conductivity and corrosion resistance. Recommended crimping tools are as follows: Anderson Versa Crimp VC8 (four indent). 73