RIG-Power Connectors (1000v AC/DC)
Ampacity Ampacity
(Using (Using Wire Connector
535 MCM) 777 MCM) Range Style Insert Gender Part Number*
Plug w/ Mech. Clamp Dead Front Pin (Line side) RIG-10P▲-M-◆
Plug w/ Mech. Clamp Socket Contact (Load Side) RI G-10S▲-M-◆
Cable Receptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-15P▲-M-◆
Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-15S▲-M-◆
Fixed Cable Receptacle w/ Mech. Clamp Dead Front Pin (Line side) RIG-17P▲-M-◆
Fixed Cable Receptacle w/ Mech. Clamp Socket Contact (Load Side) RIG-17S▲-M-◆
Panel Mount Receptacle (Bus Bar) Dead Front Pin (Line side) RIG-17PR-▲
Panel Mount Receptacle (Bus Bar) Socket Contact (Load Side) RIG-17SR-▲
Panel Mount Receptacle (Direct Cable Entry) Dead Front Pin (Line side) RIG-17PN-▲
Panel Mount Receptacle (Direct Cable Entry) Socket Contact (Load Side) RIG-17SN-▲
▲ Select Cable Size: (4=444 kcmil, 5=535 MCM, 6 = 646 MCM, 7=777 MCM)
◆ Select Grommet Number from Chart Below
* For Basketweave Grip substitute K for M
Use Crimp Tool: Anderson (Square D) Versa Crimp # VC8
◆ Color Code Options
Current Type DC AC
Standard Color Code Blue Orange Yellow Brown Red White Black Green
Part No. Suffix ◆-BL -OR -Y -BR -R -W -BK -G
Single Pole Power Connectors
900 1135 444 -777
kcmil
RIG-POWER Grommet Selection Guide
Cable Diameter 1.000-1.125 1.125-1.250 1.250-1.375 1.375-1.500 1.500-1.625 1.625-1.750 1.750-1.875
Code No.(XX) 18 20 22 24 26 28 30
72
PANEL MOUNT RECEPTACLE RIG-17X
NOTE:
See page 19, shell size
C24 for full mounting
dimensions.
Amphenol
INDUSTRIAL
P-500™ / PD-501 POWER Connectors
Type of Boot Part #
Ampacity Wire Size Termination Gender Part Number (See Color Code) Cable Sealing Range
900* –––––– Stud Socket P-500126-BS-◆––––––– –––––––
900* 535MCM Solder Pin PD-501-L TMPC-10-◆1.125 - 1.500
900•535MCM Crimp Pin P-500126-P TMPC-10-◆1.125 - 1.500
325 313MCM Solder Pin PD-501-S TMPC-10-◆1.125 - 1.500
Note: Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers.
Copper alloy, silver plated contacts for maximum conductivity.
Crimp tool required for P-500126-P is Thomas & Betts hex crimp using Tool # 13642M & Die #11747.
* When used with 125° C-rated cable.
TMPC™ Connectors
Type of Cable Sealing
Gender Termination Current Range Part Number Wire Size Boot Part No. Range
Socket 7/8" Stud/Panel board 900-1135 amps TMPC-41777-L-◆n/a n/a n/a
Socket 2 Hole Bus Bar 900-1135 amps TMPC-41777-24L n/a n/a n/a
Pin Crimp 900 amps TPMC-40535-L 444 - 535 kcmil TM PC-10-◆1.125 - 1.500
Pin Crimp 900-1135 amps TPMC-40777-L 646-777 kcmil TMPC-10-◆1.125 - 1.500
Note: TPMC Connectors are rated at 1000 Volts AC/DC when mounted on 5" centers.
Material is Copper alloy, silver plated for maximum conductivity and corrosion resistance.
Recommended crimping tools are as follows: Anderson Versa Crimp VC8 (four indent).
73
