15,4 Date Code XXXXXXX ERNI 123962 EE-Zone fur durchkontaktierte Locher o0.60.05 compliant zone for thru hole 2 10 x 2 = 20 8 25 10 x 2 = 15 2 o0.60.05 20 11 5x2= 1 Ebene - a b 9.7 Level 2 8.2 Ebene - Level 1 c d 10 11.2 Level 3 Ebene z +0.2 +0.2 +0.2 4.5 0.3 e f 1 max. 13,45 -0,1 Firmensignet 3 -0,1 Ident-Nr. 3.7 0.3 1 max. A P2 50 max. B C D E P1 F G U 1 Datum plane depth 11 10 9 7 8 6 5 4 3 2 1 K R3 z B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C Bezugsebene Tiefe 13 0.3 25 24 23 22 21 20 19 18 17 16 15 B B B B B C J contact layout Bestuckungsplan - B B B B B C H B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C B B B B B C L a M b N R2 c P d Q e R f R1 S T 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 4 10 x 2 = ( 20 ) 4 5.3 0.1 14.5 0.2 6.8 16 0.2 8.3 0.1 0.1 10 x 2 = ( 20 ) 0.1 alle Locher all holes 2 1) +0,05 2 nicht 1) o 0,6 0,05 Durchmesser des metallisierten Loches o 0,6 0,05 Diameter of finished plated-through hole durchkontaktiert o 0,7 0,02 Bohrungsdurchmesser des Loches not plated thru 25 15 13 o 0,7 0,02 Diameter of drilled hole 1 11 z a b 2 c Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 Metal plating of plated-through hole see drawing 114406 d e 5 x 2 = 10 f Fehlende Mae und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Information: P2 Level 2, 3 Tolerances siehe Bestuckungsplan/ see contact layout Consider protection memo from DIN 34 Anforderungsstufe 2 / All Dimensions in mm class 2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste A ERmet Male Wide Type A Elektroapparate GmbH D-73099 ADELBERG Index 2:1 Scale V:00033133.SZN 123962 ERMA I