1
3,4mm
FX8 Series
Note: that FX8 series and FX8C series are not mated with each other.
FX8C Series
●Stacking Height 3,4mm-FX8 Series
5 to 16mm
●Stacking Height 5 to 16mm-FX8C Series
Features
1.
Stacking Height: 3mm to 16mm
Stacking height of mated connectors ranges from
3mm to 16mm. (Fig.1.2)
2. SMT Coplanarity
The coplanar tolerance at the solder area is less
than 0.1mm.
3. Mating Guide
Built-in guide ribs and a chamfer allow for ±0.6
mm of mis-alignmet and ensures easy mating.
4. Mis-insertion Prevention
Bosses located on the bottom side of the connector
differ in position and diameter to prevent mis-orientating
the parts on the board.
5. Dual Connected Products
In order to enhance mounting reliability and
accuracy when mounting two of the same
connectors at the same time, Hirose offers the
option of having two connectors attached to one
another by means of a spacer. Pitch between the
two connectors is 11mm.
2018.6④
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
FX8/FX8C Series
Fig.1
Fig.2
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
2
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
FX8 Series
Product Specifications
Items Specifi cations Conditions
1. Insulation Resistance 1000Mø min 250V DC
2. Withstanding voltage No fl ashover or insulation breakdown. 300V AC/1 min
3. Contact Resistance 45mø max. 100mA
4. Vibration No electrical discontinuity of 1µs or more
Frequency : 10 to 55Hz, single amplitude of 0.75mm,
2 hours in each of the 3 axis directions.
5. Humidity (Steady state) Contact resistance : 55mø max. : Insulation
resistance : 100Mø min. 96 hours at 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance : 55mø max. : Insulation
resistance : 100Mø min.
(-55ç : 30 minutes, 15 to 35ç : 2 to 3 minutes
85ç : 30 minutes, 15 to 35ç : 2 to 3 minutes) 5 cycles
7. Mating Cycles Contact resistance : 55mø max. 50 cycles
8. Resistance to Soldering
heat
No deformation of components affecting
performance.
Refl ow : At the recommended temperature profi le
Manual soldering : 360ç for 5 seconds
Note 1 : Includes temperature rise caused by current fl ow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range includes the non conducting condition in storage, shipment or during transportation.
Rating Current rating 0.4A
Voltage rating 100V AC
Operating Temperature Range -55ç to +85ç (Note 1)
Operating Humidity Range -40% to 80%
Storage Temperature Range -10ç to +60ç(Note 2)
Storage Humidity Range 40% to 70%(Note 2)
3 to 4
Material / Finish
Part Material Finish Remarks
Insulator PPS Light brown UL94V-0
Header Contact
Phosphor bronze
Contact area Gold plated –––––––
Lead area Tin (Note 2)
Receptacle Contact Contact area Gold plated –––––––
Lead area
Note 1 : Slight color difference to the resin may occur. This will not affect fi t, form or function of the connector.
Note 2 : FX8-*P-SV is gold plated.
Single Product Mating Sectional View
(The above illustration represents the stacking height 3mm type.)
FX8 - 120 P - SV 1 (92)
1 2 3 4 5 6
q
Series Name : FX8
w
No. of contacts : 60, 80, 90, 120, 140
e
Connector type P : Header
S : Receptacle
r
Contact type SV : Board vertical type
t
Product height variation : none= standard (minimum low profile)
1 : +1mm
y
Package Form
None, (71) : Tray package product
(21), (91) : Tube packaging product
(22), (92) : Emboss tape package product
BStacking Height Variation
●Single Product
FX8-**P-SV FX8-**P-SV1
FX8-**S-SV 3mm 4mm
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
3
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
Header
[FX8-**P-SV]
A±0.3
D±0.2
E±0.1
t0.2±0.03∞w0.25±0.03
0.6±0.1
5.1±0.3
(0.4)(0.75)
2.45±0.25
(C1)
(Ø0.9)
(Ø0.6)
(1.5)
(2.4)
2-(C0.2)
(2.4)
B+0.05
_0.2
C+0.05
_0.2
6.5 0
_0.3
Polarization mark
[FX8-***P-SV1]
A±0.3
D±0.2
E±0.1
t0.2±0.03∞w0.25±0.03
0.6±0.1
5.1±0.3
(0.4)
(0.75)
3.45±0.25
Polarization mark
(1)
(Ø0.9)
(Ø0.6)
(1.5)
(2.4)
2-(C0.2)
(2.4)
B+0.05
_0.2
C+0.05
_0.2
6.5 0
_0.3
** 71 : Tray packaging, 91 : Tube packaging, 92 : Embossed tape packaging
Note 1 : Please place orders in full magazine/tube quantities.
Note 2 :
Reels are sold containing 1,000 pcs/reel. Please refer to the delivery form on page 6 for details.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Unit : mm
Part No.** HRS No. No. of contacts A B C D E RoHS
FX8-60P-SV(**) 578-0001-6 ** 60 24.60 23.00 20.70 17.40 22.20
Yes
FX8-80P-SV(**) 578-0003-1 ** 80 30.60 29.00 26.70 23.40 28.20
FX8-90P-SV(**) 578-0004-4 ** 90 33.60 32.00 29.70 26.40 31.20
FX8-100P-SV(**) 578-0005-7 ** 100 36.60 35.00 32.70 29.40 34.20
FX8-120P-SV(**) 578-0006-0 ** 120 42.60 41.00 38.70 35.40 40.20
FX8-140P-SV(**) 578-0007-2 ** 140 48.60 47.00 44.70 41.40 46.20
** 71 : Tray packaging, 91 : Tube packaging, 92 : Embossed tape packaging
Note 1 : Please place orders in full magazine/tube quantities.
Note 2 :
The embossed tape packaged parts are available for all pin counts, except the 140 pin count. Reels are sold containing
1,000
pcs/reel
. Please refer to the delivery form on page 15 for details.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Unit : mm
Part No.** HRS No. No. of contacts A B C D E RoHS
FX8-60P-SV1(**) 578-0041-0 ** 60 24.60 23.00 20.70 17.40 22.20
Yes
FX8-80P-SV1(**) 578-0043-6 ** 80 30.60 29.00 26.70 23.40 28.20
FX8-90P-SV1(**) 578-0044-9 ** 90 33.60 32.00 29.70 26.40 31.20
FX8-100P-SV1(**) 578-0045-1 ** 100 36.60 35.00 32.70 29.40 34.20
FX8-120P-SV1(**) 578-0046-4 ** 120 42.60 41.00 38.70 35.40 40.20
FX8-140P-SV1(**) 578-0047-7 ** 140 48.60 47.00 44.70 41.40 46.20
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
4
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
A±0.3
D±0.2
E±0.1
t0.2±0.03∞w0.25±0.03
0.6±0.1
5.6±0.3
(0.75)
2.25±0.25
(1)
(2.4)
(Ø0.6)
(1.8)
(2.4)
2-(C0.2)
(Ø0.9)
B+0.2
0
C+0.2
0
7 0
_0.3
Polarization mark (Back side)
Receptacle
[FX8-**S-SV]
PCB Mounting Pattern
** None : Tray packaging, 21 : Tube packaging, 22 : Embossed tape packaging
Note 1 : Please place orders in full magazine/tube quantities.
Note 2 : Reels are sold containing 1,000
pcs/reel
. Please refer to the delivery form on page 6 for details.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Unit : mm
Receptacle
Part No.** HRS No. No. of contacts A B C D E RoHS
FX8-60S-SV(**) 578-0201-5 ** 60 24.60 23.05 20.80 17.40 22.20
Yes
FX8-80S-SV(**) 578-0203-0 ** 80 30.60 29.05 26.80 23.40 28.20
FX8-90S-SV(**) 578-0204-3 ** 90 33.60 32.05 29.80 26.40 31.20
FX8-100S-SV(**) 578-0205-6 ** 100 36.60 35.05 32.80 29.40 34.20
FX8-120S-SV(**) 578-0206-9 ** 120 42.60 41.05 38.80 35.40 40.20
FX8-140S-SV(**) 578-0207-1 ** 140 48.60 47.05 44.80 41.40 46.20
・
Recommended metal mask thickness : t = 0.15mm
・
If the inside (the connector mounting lower side) of the SMT portion is not
treated with the insulation tape and so on, the area is specifi ed as a pattern prohibited area.
Header
・
Recommended metal mask thickness : t = 0.15mm
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
5
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
Connector Precautions for use
1. Tolerance Clearance on the Mating Side
The effective contact length of the product is set to 0.7mm. Please make sure there is less than 0.2mm
clearance between the header and receptacle during mating.
2. Support between the PCBs
Please be sure to fix the boards to each other with screws or other means of support. Do not use only the
mated connector to support the boards.
3. Stacking Height Tolerance for Mating
4. Multiple mounting on same PCB is not recommended in principle
5. Mounting Temperature Profile (Reference)
HRS test conditions
Test board Glass epoxy 161mm∞100mm∞1.6mm thick
Solder method : Reflow
Solder composition : Paste, 96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature
may vary, depending on solder paste type, volume/
thickness and board size/thickness. Consult your
solder paste and equipment manufacturer for
specific recommendations.
MAX 60s90 to 120s
Soldering Time
(220ç min.)
Pre-heating time
(150 to 200ç)
Time (Second)
(ç)
Temperature
150ç
200ç
220ç
140
180
220
0
160
200
(MAX 250ç)
240
260
Note : Please Note that the above stacking tolerance doesn't include the solder paste thickness.
Stack 3mm 3 +0.3
_0.2 mm
Stack 4mm 4 +0.3
_0.2 mm
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
6
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
[Embossed Tape Package]
Embossed Carrier Tape Dimensions Reel Dimensions (FREE)
244.4[56.4][72.4]
Installation area: Leader area
(400mm min.)
(More than 10 pockets)
Space
(10 pockets min.)
Space Cover tapeEmboss tape
E
Ø80
Ø13
Termination
section End Contact area
(The product includes 1000 pieces.)
*The figure above shows the receptacle in its pocket.
(1.7)
20.2 [26.2][34.2]
40.4 [52.4][68.4]
44 [56][72]
1.75
Unreeling direction
12
24
D
A
B
C
0.4
1.5
Ø1.5
(9.7)
(7.2)
550±2
Polarity mark
Marking
Receptacle
[FX8-**S-SV (21)]
Packaging Type
Packaging Specifi cation
[Tube packaging]
Header
[FX8-**P-SV (91)]
[FX8-
**P-SV1 (91)]
Packaging Type No. of contacts 60
contacts
80
contacts
90
contacts
100
contacts
120
contacts
140
contacts
Tube packaging
Pieces per tube 21 pcs 17 pcs 15 pcs 14 pcs 12 pcs 10 pcs
Sales unit Per tube. Please place orders in full magazine/tube quantities.
Tube Total Length 550mm±2mm
Embossed Tape
Packaging
Tape Width 44mm 44mm 44mm 56mm 56mm 72mm
Product Pitch 12mm
Embossed Reel diameter Refer to the table on catalog page 6.
Pieces per reel 1000 pcs/reel
Sales unit Per reel
** The chart above applies only to individual connectors.
Dual connected products are packaged and shipped in trays only.
(9.8)
Polarity mark
Marking
(5.2)
550±2
Unit : mm
P/S Part No. ABCDE
Header FX8-**P-SV (92) 5.5 7.9 3.2
12
Ø 330
FX8-**P-SV1 (92) 4.2 (Note 1)
Receptacle FX8-**S-SV (22) 6.0 8.4 2.6 Ø 330
** : No. of contacts
Note 1 : Ø 330 are for 60, 80 and 90 contacts.
Ø 360 are for 100, 120 and 140 contacts.
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
7
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
Product Specifications
FX8C Series
Ratings
Rated current : 0.4A
Rated voltage : AC 100V
Operation temperature range : -55 to +85°C (Note 1)
Operation humidity range : 40 to 80%
Storage temperature range : -10 to
+
60°C (Note 2)
Storage humidity range : 40 to 70% (Note 2)
Items Specifi cations Conditions
1. Insulation resistance Min of 100Mø Measured at 250 V DC
2. Withstand voltage No fl ashover or dielectric breakdown. 300V AC for 1 minute
3. Contact resistance Max of 80Mø Measured at 100 mA
4. Vibration proof No electrical discontinuity lasting for a min
of 1μs.
10 to 55Hz, half amplitude : 0.75mm,
3 axis directions, 10 cycles each.
5. Moisture resistance Contact resistance : a max of 100mø ;
Insulation resistance : a min of 100Mø
Left for 96 hours at the temperature of 40 ±2°C
and the humidity of 90 to 95%
6. Temperature cycle Contact resistance : a max of 100mø ;
Insulation resistance : a min of 100ø
(-55°C for 30 minutes → 15 to 35°C for 2 to 3 minutes → 85°C
for 30 minutes → 15 to 35°C for 2 to 3 minutes) in 5 cycles
7. Mating cycles Contact resistance : a max of 100mø 50 times
8. Soldering heat
resistance
No dissolution of the resin affecting
performance.
Reflow : With recommended temperature profile, at
the soldering iron temperature of 350°C for 5 seconds
Note 1 : Includes the temperature rise caused by current fl ow.
Note 2 : Storage as described here represents the long-term-storage status of unused items before they are mounted on PCB.
Operation humidity range applies to the unpowered status after the items are mounted on PCB.
Note 3 : The contact resistance noted above is measured using a connector combination with a 16mm stack height.
Note 1 : Black dots or other color irregularities may occur in the insulator resin. In addition, the color may change if exposed to
sunlight or fl orescent light. But this does not affect the quality or performance.
Note 2 : FX8C-*P-SV (*) and FX8C-*S-SV are gold plated.
Material / Finish
Part name Material Treatment Remarks
Insulator PPS resin Light brown UL94V-0
Header contact
Phosphor bronze
Contact area Gold plating –––––––
Lead area Pure tin plating (Note 2)
Receptacle contact Contact area Gold plating –––––––
Lead area Pure tin plating (Note 2)
●Single Product
●Two-connected products
q
Series name : FX8C t
Variable product height : None : Standard (Minimum height product)
1 : +1mm 6 : +6mm
w
No. of contacts : 60, 80, 100, 120, 140 y
Packaged state
(71) : Tray packaging
(68), (91) : Magazine/tube packaging
(92) : Embosses tape packaging
(93) : Vacuum tape, embosses tape packaging
e
Connector type : P : Header
S : Receptacle
r
Contact form : SV : Vertical PCB type
FX8C - 120 P - SV 1 (91)
1 2 3 4 5 6
FX8C - 120/120 P 11 - SV 1 J
1 2 3 6 74 5
*Dual connected products are packed in trays as the standard delivery method.
q
Series name : FX8C r Pitch between dual connected products
w
No. of contacts : 60∞2, 80∞2, 100∞2, 120∞2, 140∞2
Example : 120/120=240 contacts
t
Contact form : SV : Vertical PCB type
y
Variable product height : None : Standard (Minimum height product)
1 : +1mm 6 : +6mm
u
J : Dual connected product
e
Connector type : P : Header
S : Receptacle
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
8
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
Stacking Height Variations
5 to 16
Receptacle
Header
FX8C-**S-SV
FX8C-**/**S11-SVJ
FX8C-**S-SV5
FX8C-**/**S11-SV5J
FX8C-**P-SV
FX8C-**/**P11-SVJ 5mm 10mm
FX8C-**P-SV1
FX8C-**/**P11-SV1J 6mm 11mm
FX8C-**P-SV2
FX8C-**/**P11-SV2J 7mm 12mm
FX8C-**P-SV4
FX8C-**/**P11-SV4J 9mm 14mm
FX8C-**P-SV6
FX8C-**/**P11-SV6J 11mm 16mm
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
9
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
Polarity mark
A±0.3
D±0.2
E±0.1
P=0.6±0.1
(Ø0.9)
(2.4)
(C1)
t0.2±0.03∞w0.25±0.03
5.1±0.3
(Ø0.6)
(1.5)
(2.4)
2-(C0.2)
B
+0.05
– 0.2
C
+0.05
– 0.2
6.5
(0.4)
(0.75) F±0.25 0
_0.3
A±0.25
D±0.2
E±0.1
P±0.6±0.1
(Ø0.9)
(2.4)
(C1)
t0.2±0.03∞w0.25±0.03
5.1±0.3
Polarity mark
(Ø0.6) (1.5)
(2.4)
2-(C0.2)
B
+0.05
– 0.2
C
+0.05
– 0.2
6.5
(0.4)(0.75)
4.45±0.25
0
_0.3
[FX8C-**P-SV1]
[FX8C-**P-SV2]
[FX8C-**P-SV4]
[FX8C-**P-SV6]
Header (Single Product)
[FX8C-**P-SV]
Unit : mm
Part No. HRS No. No. of contacts A B C D E RoHS
FX8C-60P-SV(**) 578-0501-9 ** 60 24.60 23.00 20.70 17.40 22.20
Yes
FX8C-80P-SV(**) 578-0503-4 ** 80 30.60 29.00 26.70 23.40 28.20
FX8C-100P-SV(**) 578-0505-0 ** 100 36.60 35.00 32.70 29.40 34.20
FX8C-120P-SV(**) 578-0506-2 ** 120 42.60 41.00 38.70 35.40 40.20
FX8C-140P-SV(**) 578-0507-5 ** 140 48.60 47.00 44.70 41.40 46.20
Note 1 :
Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16.
Note 2 : Please place orders in full magazine/tube quantities.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Unit : mm
Note 1 :
Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16.
Note 2 : Please place orders in full magazine/tube quantities.
Note 3 :
For FX8C-
**
P-SV6 connectors, there is a spacer attached between the leads. Please request the specific drawing for clarification.
Note 4 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Part No. HRS No. No. of contacts A B C D E F RoHS
FX8C-60P-SV1(**) 578-0521-6 **
60 24.60 23.00 20.70 17.40 22.20
5.45
Yes
FX8C-60P-SV2(**) 578-0541-3 ** 6.45
FX8C-60P-SV4(**) 578-0581-8 ** 8.45
FX8C-60P-SV6(**) 578-0601-3 ** 10.45
FX8C-80P-SV1(**) 578-0523-1 **
80 30.60 29.00 26.70 23.40 28.20
5.45
FX8C-80P-SV2(**) 578-0543-9 ** 6.45
FX8C-80P-SV4(**) 578-0583-3 ** 8.45
FX8C-80P-SV6(**) 578-0603-9 ** 10.45
FX8C-100P-SV1(**) 578-0525-7 **
100 36.60 35.00 32.70 29.40 34.20
5.45
FX8C-100P-SV2(**) 578-0545-4 ** 6.45
FX8C-100P-SV4(**) 578-0585-9 ** 8.45
FX8C-100P-SV6(**) 578-0605-4 ** 10.45
FX8C-120P-SV1(**) 578-0526-0 **
120 42.60 41.00 38.70 35.40 40.20
5.45
FX8C-120P-SV2(**) 578-0546-7 ** 6.45
FX8C-120P-SV4(**) 578-0586-1 ** 8.45
FX8C-120P-SV6(**) 578-0606-7 ** 10.45
FX8C-140P-SV1(**) 578-0527-2 **
140 48.60 47.00 44.70 41.40 46.20
5.45
FX8C-140P-SV2(**) 578-0547-0 ** 6.45
FX8C-140P-SV4(**) 578-0587-4 ** 8.45
FX8C-140P-SV6(**) 578-0607-0 ** 10.45
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
10
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
A±0.3
D±0.2
E±0.1
P=0.6±0.1
(Ø0.9)
(2.4)
(C1)
t0.2±0.03∞w0.25±0.03
5.6±0.3
Polaritymark(back)
(Ø0.6)
(1.8)
(2.4)
2-(C0.2)
B
+0.2
0
C
+0.2
0
7
(0.75)
3.95±0.25
0
_0.3
A±0.3
D±0.2
E±0.1
P=0.6±0.1
(Ø0.9)
(2.4)
(C1)
t0.2±0.03∞w0.25±0.03
5.6±0.3
Polarity mark (back)
(Ø0.6)
(1.8)
(2.4)
2-(C0.2)
B
+0.2
0
C
+0.2
0
7
(0.75) 8.95±0.25 0
_0.3
Note 1 : Embossed tape packaging product are sold in full reel quantities.
For details, see the item showing delivery forms in Page 16.
Note 2 : Please place orders in full magazine/tube quantities.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Receptacle (Single Product)
[FX8C-**S-SV]
[FX8C-**S-SV5]
Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16.
Note 2 : Please place orders in full magazine/tube quantities.
Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes.
Part No. HRS No. No. of contacts A B C D E RoHS
FX8C-60S-SV(**) 578-0801-2 ** 60 24.60 23.05 20.80 17.40 22.20
Yes
FX8C-80S-SV(**) 578-0803-8 ** 80 30.60 29.05 26.80 23.40 28.20
FX8C-100S-SV(**) 578-0805-3 ** 100 36.60 35.05 32.80 29.40 34.20
FX8C-120S-SV(**) 578-0806-6 ** 120 42.60 41.05 38.80 35.40 40.20
FX8C-140S-SV(**) 578-0807-9 ** 140 48.60 47.05 44.80 41.40 46.20
Unit : mm
Unit : mm
Part No. HRS No. No. of contacts A B C D E RoHS
FX8C-60S-SV5(**) 578-0821-0 ** 60 24.6 23.05 20.8 17.4 22.2
Yes
FX8C-80S-SV5(**) 578-0823-5 ** 80 30.6 29.05 26.8 23.4 28.2
FX8C-100S-SV5(**) 578-0825-0 ** 100 36.6 35.05 32.8 29.4 34.2
FX8C-120S-SV5(**) 578-0826-3 ** 120 42.6 41.05 38.8 35.4 40.2
FX8C-140S-SV5(**) 578-0827-6 ** 140 48.6 47.05 44.8 41.4 46.2
B
Recommended PCB layout and metal mask dimensions for single connector (mounting side)
Polaritymark
position
Polaritymarkposition
*Recommended metal mask thickness : t = 0.15mm
Header
[FX8C-**P-SV*]
Receptacle
[FX8C-**S-SV, SV5*]
*Recommended metal mask thickness : t = 0.15mm
* The inside of SMT land (bottom of the connector being mounted)
will be a patterning restricted area if no treatment such as
insulation tape is applied.
(FX8C-**S-SV, SV5 are not applicable.)
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
11
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
A±0.3
B±0.3
E±0.2
F±0.1
Polarity mark
(4.5)
C
+0.05
–0.2
D
+0.05
–0.2
(16.1)
(3.35) (11)
A±0.3
B±0.3
E±0.2
F±0.1
Polarity mark
(4.5)
C
+0.05
–0.2
D
+0.05
–0.2
(16.1)
(G) (11)
[FX8C-**/**P11-SV1J]
[FX8C-**/**P11-SV2J]
[FX8C-**/**P11-SV4J]
[FX8C-**/**P11-SV6J]
Unit : mm
Part No. HRS No. No. of contacts A B C D E F RoHS
FX8C-60/60P11-SVJ(71) 578-0651-1 71 60×2 31.70 24.70 23.00 20.70 17.40 22.20
Yes
FX8C-80/80P11-SVJ(71) 578-0653-7 71 80×2 37.70 30.70 29.00 26.70 23.40 28.20
FX8C-100/100P11-SVJ(71) 578-0655-2 71 100×2 43.70 36.70 35.00 32.70 29.40 34.20
FX8C-120/120P11-SVJ(71) 578-0656-5 71 120×2 49.70 42.70 41.00 38.70 35.40 40.20
FX8C-140/140P11-SVJ(71) 578-0657-8 71 140×2 55.70 48.70 47.00 44.70 41.40 46.20
Note :
Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes.
Unit : mm
Part No. HRS No. No. of
contacts A B C D E F G H RoHS
FX8C-60/60P11-SV1J(71) 578-0671-9 71
60×2 31.70 24.70 23.00 20.70 17.40 22.20
4.35 5.45
Yes
FX8C-60/60P11-SV2J(71) 578-0691-6 71 5.35 6.45
FX8C-60/60P11-SV4J(71) 578-0731-9 71 7.35 8.45
FX8C-60/60P11-SV6J(71) 578-0751-6 71 9.35 10.45
FX8C-80/80P11-SV1J(71) 578-0673-4 71
80×2 37.70 30.70 29.00 26.70 23.40 28.20
4.35 5.45
FX8C-80/80P11-SV2J(71) 578-0693-1 71 5.35 6.45
FX8C-80/80P11-SV4J(71) 578-0733-4 71 7.35 8.45
FX8C-80/80P11-SV6J(71) 578-0753-1 71 9.35 10.45
FX8C-100/100P11-SV1J(71) 578-0675-0 71
100×2 43.70 36.70 35.00 32.70 29.40 34.20
4.35 5.45
FX8C-100/100P11-SV2J(71) 578-0695-7 71 5.35 6.45
FX8C-100/100P11-SV4J(71) 578-0735-0 71 7.35 8.45
FX8C-100/100P11-SV6J(71) 578-0755-7 71 9.35 10.45
FX8C-120/120P11-SV1J(71) 578-0676-2 71
120×2 49.70 42.70 41.00 38.70 35.40 40.20
4.35 5.45
FX8C-120/120P11-SV2J(71) 578-0696-0 71 5.35 6.45
FX8C-120/120P11-SV4J(71) 578-0736-2 71 7.35 8.45
FX8C-120/120P11-SV6J(71) 578-0756-0 71 9.35 10.45
FX8C-140/140P11-SV1J(71) 578-0677-5 71
140×2 55.70 48.70 47.00 44.70 41.40 46.20
4.35 5.45
FX8C-140/140P11-SV2J(71) 578-0697-2 71 5.35 6.45
FX8C-140/140P11-SV4J(71) 578-0737-5 71 7.35 8.45
FX8C-140/140P11-SV6J(71) 578-0757-2 71 9.35 10.45
Note 1 :
Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes.
Note 2 :
For FX8C-
**
/
**
P11-SV6J connectors, there is a spacer attached between the leads. Please request the specifi c drawing for clarifi cation.
Header (Dual Connected Product)
[FX8C-**/**P11-SVJ]
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
12
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
A±0.3
B±0.3
E±0.2
F±0.1
Polarity mark (back)
(4)
C
+0.2
0
D
+0.2
0
(16.6)
(3.4) (11)
A±0.3
B±0.3
E±0.2
F±0.1
Polarity mark (back)
(4)
C
+0.2
0
D
+0.2
0
(16.6)
(8.4) (11)
■Receptacle (Dual Connected Product)
[FX8C-**/**S11-SVJ]
[FX8C-**/**S11-SV5J]
*Recommended metal mask thickness : 0.15mm
B
Recommended PCB layout and metal mask dimensions for dual connected products (mounting side)
Header
[FX8C-**/**P 11-SVJ, SV1J]
Receptacle
[FX8C-**/**S 11-SVJ, SV5J]
*Recommended metal mask thickness: t = 0.15mm
* The inside of SMT land (bottom of the connector being mounted)
will be a patterning restricted area if no treatment such as
insulation tape is applied.
(FX8C-**/**S11-SV5J is not applicable.)
Unit : mm
Part No. HRS No. No. of contacts A B C D E F RoHS
FX8C-60/60S11-SVJ(71) 578-0901-7 71 60×2 31.70 24.60 23.05 20.80 17.40 22.20
Yes
FX8C-80/80S11-SVJ(71) 578-0903-2 71 80×2 37.70 30.60 29.05 26.80 23.40 28.20
FX8C-100/100S11-SVJ(71) 578-0905-8 71 100×2 43.70 36.60 35.05 32.80 29.40 34.20
FX8C-120/120S11-SVJ(71) 578-0906-0 71 120×2 49.70 42.60 41.05 38.80 35.40 40.20
FX8C-140/140S11-SVJ(71) 578-0907-3 71 140×2 55.70 48.60 47.05 44.80 41.40 46.20
Note :
Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes.
Unit : mm
Part No. HRS No. No. of contacts A B C D E F RoHS
FX8C-60/60S11-SV5J(71) 578-0921-4 71 60×2 31.70 24.60 23.05 20.80 17.40 22.20
Yes
FX8C-80/80S11-SV5J(71) 578-0923-0 71 80×2 37.70 30.60 29.05 26.80 23.40 28.20
FX8C-100/100S11-SV5J(71) 578-0925-5 71 100×2 43.70 36.60 35.05 32.80 29.40 34.20
FX8C-120/120S11-SV5J(71) 578-0926-8 71 120×2 49.70 42.60 41.05 38.80 35.40 40.20
FX8C-140/140S11-SV5J(71) 578-0927-0 71 140×2 55.70 48.60 47.05 44.80 41.40 46.20
Note :
Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes.
Polarity mark position
Polarity mark position
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
13
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
B
Detailed drawing on dual connected products after the spacers are removed
(individual connector from dual connected product)
Header
Receptacle
Polarity mark
Polarity mark (back)
Polarity mark (back)
Polarity mark
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
14
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
BHow to Use the Connector
1. Permissible gap between mating surfaces
The effective mating length of this product is 2.0mm. Please make sure that the gap between the header
and receptacle when mated will be 1.2mm or less.
2. Fixation between mounted PCBs
If the connector is secured to the board with only other connectors, please make sure that no vibrations or
impact will occur.
3. Tolerances in stacking height when mated
Note: Please note that the thickness of solder cream is not taken into account for the above tolerances in
stacking height.
4. Using dual connected products
Dual connected products are fixed with spacers on both longitudinal sides. However, the products cannot
be mated in that state. Please make sure to remove the spacers before mating. (Please do not remove the
spacers before mounting on PCB.)
Stack Amm A mm
+0.3
−0.2
5. Temperature profile for mounting (reference)
6. Usage Recommendations
This product has been thin-formed for minimization.
Care should be taken that excessive prying mating/unmating could cause damage and contact failure.
150ç
200ç
220ç
Soldering period
(a minimum of 220ç)
140
180
220
0
160
200
(Peak temperature : Max 250ç)
Temperature (ç)
240
260
(90 to 120 seconds)
Within 60 seconds
Preheating period
(150 to 200ç)
<Applicable conditions>
Reflow method Reflow with infrared light and heat
(SENSBEY NR-II)
Environment in the
reflow furnace Ambient air
Solder
Cream type (Sn-3Ag-0.5Cu)
(Flux contained amount : 11 Wt%)
(M705-221CM5-42-10.5
manufactured by Senju Metal
Industry Co., Ltd.)
PCB Size 161 ∞ 100 ∞ 1.6mm
Material : Glass epoxy
Metal mask thickness Thickness : 0.15mm
Note 1 : This temperature profi le shows recommended values.
Temperature should be measured on the top of the
connector.
Note 2 : The refl ow process should be limited to two times.
Note 3 : Results may differ depending on the type and
manufacturer of solder cream, PCB size, mounting
materials and other conditions. Please be sure to
confi rm the mounting conditions before use.
Note : Please use dual-connected products for multiple mounting.
However, multiple mounting of dual-connected products are not recommended.
Before removing the joint bar After removing the joint bar
Coupler
(joint)
spacers
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
15
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
BPackaging Specifi cation
[Magazine Packaging]
●Header
[FX8C-**P-SV(91)]
[FX8C-**P-SV1(91)]
[FX8C-**P-SV2(91)]
[FX8C-**P-SV4(91)]
[FX8C-**P-SV6(91)]
●Receptacle
[FX8C-**S-SV(68)]
[FX8C-**S-SV5(91)]
BForm of Delivery
Packaging style No. of contacts 60 contacts 80 contacts 100 contacts 120 contacts 140 contacts
Magazine packaging
Product quantity 21 pieces 17 pieces 14 pieces 12 pieces 10 pieces
Sales unit Please place orders in full magazine/tube quantities.
Overall magazine length 550mm ± 2mm
Embossed tape packaging
Tape width (JIS) 44 56 72
Product pitch (12mm)
Embossed reel diameter Please see the table shown in Page 16 of this catalog.
Product quantity Please see the table shown in Page 16 of this catalog.
Sales unit Full reels. Please see the table shown in page 16 of this catalog.
*
*The chart above applies only to individual connectors.
Dual connected products will be packaged and delivered in trays.
P/S Part No. A
Header
FX8C-**P-SV(91) 9
FX8C-**P-SV1(91) 10
FX8C-**P-SV2(91) 11
FX8C-**P-SV4(91) 13
FX8C-**P-SV6(91) 15
Receptacle FX8C-**S-SV(68) 7.4
FX8C-**S-SV5(91) 12.4
Polarity mark
Polarity mark
Polarity mark (back)
Marking
Marking
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
16
FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors
[Embossed Tape Packaging]
● Carrier Dimensions ●Reel Dimensions
Note :
Some products are not available packaged on an embossed tape.
Please be sure to clarify the packaging type before you order.
1.7
20.2 [26.2][34.2] 1.75
40.4 [52.4] [68.4]
44 [56] [72]
+0.15
0
Unreeling direction
12
24
DC
A
B
0.4 or 0.5
1.5
Ø1.5
244.4[56.4][72.4]
Termination Attachment Leader (400 mm or longer)
Reel dimensions
Cavity
(10 pockets or more)
Cavity
(10 pockets or more)
Cover tape
Embossed tape
E
Ø80*1
Ø13
Ø21
*
The figure above shows FX8 receptacles packaged on a
embossed tape. Dimensions shown in brackets [ ] are those
for tape widths of 56mm or 72mm.
*1 For FX8C-140S-SV(92), E dimension is 370 in diameter
and core dimension is 100 in diameter.
*2 For FX8C-120P-SV2(92), FX8C-120S-SV5(92), and
FX8C-140S-SV5(92), E dimension is 380 in diameter.
*1
*2
*2
Unit : mm
P/S Part No. A B C D E Product
quantity
Header
FX8C-**P-SV(92) 5.5 7.9 5.2 1.2 Ø370 1000 pcs/reel
FX8C-**P-SV1(92) 5.5 7.9 6.2 1.2 Ø370 1000 pcs/reel
FX8C-**P-SV2(92) 5.5 7.9 7.2 1.2 Ø330 500 pcs/reel
FX8C-**P-SV4(92) 5.5 7.9 9.2 1.2 Ø370 500 pcs/reel
FX8C-**P-SV6(92) 5.5 7.9 11.2 1.2 Ø370 500 pcs/reel
Receptacle FX8C-**S-SV(92) 6.0 8.4 4.3 1.2 Ø330 1000 pcs/reel
FX8C-**S-SV5(92) 6.0 8.4 9.3 1.2 Ø370 500 pcs/reel
** : No. of contacts
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.