GBJ10005 - GBJ1010 10A GLASS PASSIVATED BRIDGE RECTIFIER Features * * * * * * * GBJ Glass Passivated Die Construction High Case Dielectric Strength of 1500VRMS Dim Min Max Low Reverse Leakage Current A 29.70 30.30 Surge Overload Rating to 170A Peak B 19.70 20.30 L C 17.00 18.00 M D 3.80 4.20 Ideal for Printed Circuit Board Applications UL Listed Under Recognized Component Index, File Number E94661 K Lead Free Finish/RoHS Compliant (Note 4) A B Mechanical Data * * S _ N J P D Case: GBJ H Case Material: Molded Plastic - UL Flammability Classification Rating 94V-0 * * Moisture Sensitivity: Level 1 per J-STD-020C * * * * * * Lead Free Plating (Tin Finish). Polarity: Molded on Body C G E 7.30 7.70 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 3.0 X 45 K R I Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 e3 E G E Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 in-lbs Maximum L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 P 2.50 2.90 R 0.60 0.80 S 10.80 11.20 All Dimensions in mm Marking: Type Number Weight: 6.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current Symbol GBJ 10005 GBJ 1001 GBJ 1002 GBJ 1004 GBJ 1006 GBJ 1008 GBJ 1010 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V @ TC = 110C Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IO 10 A IFSM 170 A Forward Voltage per element VFM 1.05 V IR 10 500 mA I2 t 120 A2 s Peak Reverse Current at Rated DC Blocking Voltage @ IF = 5.0A @TC = 25C @ TC = 125C I2t Rating for Fusing (t < 8.3ms) (Note 1) Typical Total Capacitance per Element (Note 2) Typical Thermal Resistance, Junction to Case (Note 3) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. CT 55 pF RqJC 1.4 C/W Tj, TSTG -65 to +150 C Non-repetitive, for t > 1.0ms and < 8.3ms. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. Thermal resistance from junction to case per element. Unit mounted on 150 x 150 x 1.6mm copper plate heat sink. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21218 Rev. 7 - 2 1 of 3 www.diodes.com GBJ10005-GBJ1010 a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 12 10 with heatsink 8 6 4 without heatsink 2 Resistive or Inductive load 0 25 50 75 100 125 150 10 0.1 0.01 0 TC, CASE TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 0.4 0.8 1.2 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) 180 100 Tj = 25 C f = 1MHz Single half-sine-wave 160 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TJ = 25 C 1.0 TJ = 150 C 120 80 40 10 1 0 1 100 10 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 1000 TJ = 150 C TJ = 125 C 100 TJ = 100 C 10 1.0 TJ = 25 C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21218 Rev. 7 - 2 2 of 3 www.diodes.com GBJ10005-GBJ1010 Ordering Information Notes: (Note 5) Device Packaging Shipping GBJ10005-F GBJ 15/Tube GBJ1001-F GBJ 15/Tube GBJ1002-F GBJ 15/Tube GBJ1004-F GBJ 15/Tube GBJ1006-F GBJ 15/Tube GBJ1008-F GBJ 15/Tube GBJ1010-F GBJ 15/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21218 Rev. 7 - 2 3 of 3 www.diodes.com GBJ10005-GBJ1010