Drop-In
Monolithic Amplier
Page 1 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Product Features
• DC-4 GHz
• Single voltage supply
• Internally matched to 50 ohms
• Unconditionally stable
• Low performance variation over temperature
• Transient protected
• Aqueous washable
• Protected By US Patent 6,943,629
Typical Applications
• Cellular/ PCS/ 3G Base Station
• CATV, Cable Modem & DBS
• Fixed Wireless & WLAN
• Microwave Radio & Test Equipment
simplified schematic and pin description
Function Pin Number Description
RF IN 1RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF-OUT and DC-IN 3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
General Description
ERA-6+ (RoHS compliant) is a wideband amplier offering high dynamic range. It has repeatable perfor-
mance from lot to lot. It is enclosed in a Micro-X package. ERA-6+ uses Darlington conguration and is
fabricated using InGaP HBT technology. Expected MTBF is 420 years at 85°C case temperature.
GROUND
RF IN
RF-OUT and DC-IN
REV. M
M117811
ERA-6+
110617
DC-4 GHz
ERA-6+
CASE STYLE: VV105
PRICE: $3.85 ea. QTY. (30)
GND GND
RF-OUT and DC-IN
RF IN
1
2
3
4
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Monolithic InGaP HBT MMIC Amplier
Page 2 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Electrical Specications at 25°C and 70mA, unless noted
ERA-6+
Absolute Maximum Ratings
Parameter Ratings
Operating Temperature* -45°C to 85°C
Storage Temperature -65°C to 150°C
Operating Current 85mA
Power Dissipation 451mW
Input Power 20dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1Case is dened as ground leads.
*Based on typical case temperature rise 5°C above ambient.
Parameter Min. Typ. Max. Units Cpk
Frequency Range* DC 4GHz
Gain f=0.1 GHz 12 12.6 13.3 dB ≥ 1.5
f=1 GHz 12.5
f=2 GHz 11.1 11.7 12.3
f=3 GHz 11.7
f=4 GHz 9.8 10.3 10.8
Magnitude of Gain Variation versus Temperature
(values are negative)
f=0.1 GHz 0.0013 .0025 dB/°C
f=1 GHz 0.0018 .0035
f=2 GHz 0.0021 .004
f=3 GHz 0.0025 .005
f=4 GHz 0.0032 .007
Input Return Loss f=0.1 GHz 25 dB
f=1 GHz 30
f=2 GHz 35
f=3 GHz 33
f=4 GHz 28
Output Return Loss f=0.1 GHz 35 dB
f=1 GHz 24
f=2 GHz 20
f=3 GHz 20
f=4 GHz 20
Reverse Isolation f=2 GHz 16 19 dB
Output Power @ 1 dB compression f=0.1 GHz 17.1 dBm ≥ 1.33
f=1 GHz 16 17.2
f=2 GHz 17.1
f=3 GHz 16.2
f=4 GHz 14.7
Saturated Output Power
(at 3dB compression)
f=0.1 GHz 17.1 dBm
f=1 GHz 17.2
f=2 GHz 17.7
f=3 GHz 17.3
f=4 GHz 15.9
Output IP3 f=0.1 GHz 34 36.5 dBm ≥ 1.33
f=1 GHz 33 35
f=2 GHz 31 33
f=3 GHz 30
f=4 GHz 28.5
Noise Figure f=0.1 GHz 4.4 5.2 dB
f=1 GHz 4.4 5.5
f=2 GHz 4.5 5.5
f=3 GHz 4.5 6
f=4 GHz 4.7 6
Group Delay f=2 GHz 80 psec
Recommended Device Operating Current 70 mA
Device Operating Voltage 4.7 5 5.3 V ≥ 1.5
Device Voltage Variation vs. Temperature at 70mA -3.2 mV/°C
Device Voltage Variation vs. Current at 25°C 11.8 mV/mA
Thermal Resistance, junction-to-case1138 °C/W
*Guaranteed specication DC-4 GHz. Low frequency cut off determined by external coupling capacitors.
Monolithic InGaP HBT MMIC Amplier
Page 3 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
R BIAS
Vcc “1%” Res. Values (ohms)
for Optimum Biasing
7 30.1
8 43.2
9 56.2
10 69.8
11 84.5
12 100
13 113
14 127
15 140
16 154
17 169
18 182
19 196
20 210
ERA-6+
Recommended Application Circuit
4
Test Board includes case, connectors, and components (in bold) soldered to PCB
6
Additional Detailed Technical Information
Additional information is available on our web site. To access this information enter the model number on
our web site home page.
Product Marking
Performance data, graphs, s-parameter data set (.zip le)
Case Style: VV105
Plastic micro-x, .085 body diameter, lead nish: tin/silver/nickel
Suggested Layout for PCB Design: PL-261
Evaluation Board: TB-431-6+
Tape & Reel: F20
Environmental Ratings: ENV08T2
1
2
3
4
index over pin 1
Markings in addition to model number designation may appear for internal quality control purposes.
Monolithic InGaP HBT MMIC Amplier
Page 4 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
No. Test Required Condition Standard Quantity
1Visual Inspection Low Power Microscope
Magnication 40x
MIP-IN-0003
(MCT spec) 45 units
2 Electrical Test Room Temperature SCD
(MCL spec) 45 units
3 SAM Analysis Less than 10% growth in term of
delamination
J-Std-020C
(Jedec Standard) 45 units
4Moisture Sensitivity
Level 1
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reow 3 cycles at 260°C peak
J-Std-020C
(Jedec Standard) 45 units
Visual
Inspection Electrical Test SAM Analysis
Reow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection Electrical Test SAM Analysis
Start
MSL Test Flow Chart
ERA-6+
Human Body Model (HBM): Class 1B (500 v to < 1,000 v) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 ( < 100 v) in accordance with ANSI/ESD STM 5.2 - 1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C
ESD Rating