RF360 Europe GmbH
A Qualcomm – TDK Joint Venture
®
RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of
RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.
is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to
EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.
RF360 Europe GmbH, Anzinger Str. 13, München, Germany
© 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.
SAW Components
SAW RF filter
GPS
Series/type: B4300
Ordering code: B39162B4300F210
Date: August 25, 2011
Version: 2.1
These materials, including the information contained herein, may be used only for informational purposes by
the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or
the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)
or information contained herein without notice. The materials and information are provided on an AS IS basis,
and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or
implied, with respect to the materials, or any output or results based on the use, application, or evaluation of
such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,
copyrights or any other intellectual property rights or other rights of third parties.
No use of this documentation or any information contained herein grants any license, whether express, implied,
by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned
by QUALCOMM Incorporated or any of its subsidiaries.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of RF360 Europe GmbH.
Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States
and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be
trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.
Diversion contrary to U.S. and international law is strictly prohibited.
EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW RF filter
GPS
Series/type:
Ordering code: B4300
B39162B4300F210
Date:
Version: August 25, 2011
2.1
2August 25, 2011
B4300
1575.42 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
Application
■Low-loss RF filter for GPS application
■No matching network required for operation at 50 Ω
■Additional passband characteristics for Galileo
Features
■Package size 1.4 x 1.1 x 0.4 mm3
■Package code QCS5P
■RoHS compatible
■Approximate weight 0.003 g
■Package for Surface Mount Technology
(SMT)
■Ni, gold-plated terminals
■AEC-Q200 qualified component family (operable
temperature range –40˚C to +85˚C)
■Electrostatic Sensitive Device (ESD)
0
.
325
0.4 0.575
1
54
3
2
0.25
1.1
0.5
0.5
1.4
bottom view
side view
top view
Pin configuration
■1 Input
■4 Output
■2,3,5 to be grounded
3August 25, 2011
B4300
1575.42 MHz
SAW Components
SAW RF filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Characteristics
Temperature range for specification: T = –40 ˚C to +85 ˚C
Terminating source impedance: ZS=50Ω
Terminating load impedance: ZL=50Ω
min. typ.
@ 25 ˚C max.
Center frequency fC— 1575.42 — MHz
Maximum insertion attenuation αmax
1573.92 ... 1576.92 MHz — 1.0 1.3 dB
Amplitude ripple (p-p) ∆α
1573.92 ... 1576.92 MHz — 0.1 0.6 dB
VSWR 1573.92 ... 1576.92 MHz — 1.3 1.7
Attenuation α
1.00 ... 810.00 MHz 41 45 — dB
810.00 ... 1453.00 MHz 40 45 — dB
1453.00 ... 1525.00 MHz 37 44 — dB
1625.00 ... 1710.00 MHz 40 50 — dB
1710.00 ... 1749.00 MHz 43 50 — dB
1749.00 ... 1785.00 MHz 44 50 — dB
1785.00 ... 1920.00 MHz 43 50 — dB
1920.00 ... 2200.00 MHz 41 52 — dB
2200.00 ... 2450.00 MHz 35 40 — dB
2450.00 ... 2700.00 MHz 40 50 — dB
2700.00 ... 4000.00 MHz 30 35 — dB
4August 25, 2011
B4300
1575.42 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
Additional Passband Characteristics for Galileo
Temperature range for specification: T = –40 ˚C to +85 ˚C
Terminating source impedance: ZS=50Ω
Terminating load impedance: ZL=50Ω
min. typ.
@ 25 ˚C max.
Center frequency fC— 1575.42 — MHz
Maximum insertion attenuation αmax
1572.42 ... 1578.42 MHz — 1.2 1.8 dB
Amplitude ripple (p-p) ∆α
1572.42 ... 1578.42 MHz — 0.4 1.0 dB
VSWR 1572.42 ... 1578.42 MHz — 1.5 1.9
Maximum ratings
Operable temperature range T –40/+85 ˚C
Storage temperature range Tstg –40/+85 ˚C
DC voltage VDC 0 V
Source power PS10 dBm source impedance 50 Ω
20 dBm 824 MHz to 915 MHz,
1710 MHz to1785 MHz
5August 25, 2011
B4300
1575.42 MHz
SAW Components
SAW RF filter
Data sheet
Please read
cautions and warnings and
important notes
at the end of this document.
Transfer function
Transfer function (wideband)
6August 25, 2011
B4300
1575.42 MHz
Please read
cautions and warnings and
important notes
at the end of this document.
SAW Components
SAW RF filter
Data sheet
References
Type B4300
Ordering code B39162B4300F210
Marking and package C61157-A8-A9
Packaging F61074-V8212-Z000
Date codes L_1126
S-parameters B4300_NB.s2p, B4300_WB.s2p
See file header for port/pin assignment table.
Soldering profile S_6001
RoHS compatible defined as compatible with the following documents:
"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils See Inductor pdf-catalog
http://
www
.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
w
ww.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2011. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
t
he international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
t
he type in question please also contact one of our Sales Offices.
7August 25, 2011
Important notes
T
he following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
