Home | Sign In | Site Map | Contact Us Go Home > Search Tools > Part Number Part Number Search Go You Searched For: DA115339-1 Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the "Global Sales Locator " located either to the right of this data or at the top of every page. Sales Support Product Overview Our Descriptive Part Number: DA1153391 Our Global Manufacturing Part Number: 115339 -0001 Brand: Cannon Product Category: D Sub Product Line: D Sub Series: D SUB YES RoHS compliant = NO material restrictions of lead, cadmium, hexavalent chromium, mercury, poly bromated biphenyl ether (PBB) and poly bromide diphenyl ether (PBDE) according to directive 2002/95/EC RoHS compatible = Compatible with lead free soldering process Product Datasheet Thumbnail Image Product Group Where Sold D Sub Accessory type Application Type Shell Size Material Cable Exit Cable Entry Dimension A Dimension B Dimension C Dimension D Dimension E Dimension F D Subminiature Accessories Europe, Americas, Asia Pacific Plastic Endbell (Quick Disconnect) Commercial DA Black Thermoplastic, UL 94V -0 Rated Straight and 90 Degree Cable Exit 7,70 (.303) 49,63 (1.954) max. 32,41 (1.276) max. 33,30 (1.311) 0,15 (.006) 16,51 (.650) max. 7,70 (.303) min. 6,70 (.264) min. Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 1 spacer, 2 self -tapping screws, 2 machined screws. Order optional locking hardware separately. Dimension are shown in mm (inch). Dimensions subject to change. Please Contact Cannon Sales Department. Note 1 Note 2 Footnote For more information Home | About ITT | Products | Design Center | Literature Legal Disclaimer | Privacy Policy | Terms & Conditions (c) 2010 ITT Corporation. All rights reserved. | | News & Events | Search Tools Provide Website Feedback | Global Sales Support Channel Partners Sign-In