ROX Vishay Dale Metal Oxide Resistors, Special Purpose, High Voltage FEATURES * Low TCR: 200 ppm/C standard 100 ppm/C, 50 ppm/C available * Tolerances: 1 %, 2 %, 5 %, 10 % * High Voltage (up to 45 kV) * For oil bath or open air operation * Matched sets available * Special testing available upon request * Lead (Pb)-free version is RoHS compliant Available e3 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING HISTORICAL MODEL RESISTANCE RANGE *** VOLTAGE RATING 200 ppm V P25 C P70 C P125 C 100 ppm W** W** W** ROX050 ROX-1/2 2.0 1.4 1.0 2 kV 1K - 1G 1K - 100M ROX-3/4 3.0 2.16 1.5 5 kV 1K - 3G 1K - 500M ROX075 ROX100 ROX-1 4.0 2.88 2.0 7.5 kV 1K - 3G 1K - 500M ROX150 ROX-1-1/2 5.0 3.6 2.5 11 kV 1K - 3G 1K - 500M ROX200 ROX-2 6.0 4.32 3.0 15 kV 1K - 3G 1K - 1G ROX-3 10.0 7.2 5.0 22.5 kV 1K - 3G 1K - 1G ROX300 ROX400 ROX-4 12.0 8.64 6.0 30 kV 1K - 3G 1K - 1G ROX500 ROX-5 16.0 11.52 8.0 37.5 kV 1K - 3G 1K - 1G ROX600 ROX-6 20.0 14.4 10.0 45 kV 1K - 3G 1K - 1G ** Increase wattage by 40 % for 0.040" [1.02 mm] diameter leads. *** For resistance values above and below those listed please contact us. **** Non inductive 200 ppm/C TC only. NOTE: * All resistance values are calibrated at 100 VDC. Calibration at other voltages available * 1 % not available above 1G ohm * Part Marking: print marked - DALE, model, value, tolerance, temperature coefficient, date code 50 ppm NON-INDUCTIVE **** 1M - 100M 1M - 100M 1M - 100M 1M - 100M 1M - 500M 1M - 500M 1M - 500M 1M - 500M 1M - 500M 100R - 1M 100R - 1M 100R - 1M 100R - 1M 400R - 10M 500R - 10M 500R - 10M 500R - 10M TECHNICAL SPECIFICATIONS PARAMETER UNIT ROX050 Insulation Resistance Category Temperature Range ROX075 ROX100 ROX150 ROX200 C ROX300 ROX400 ROX500 ROX600 1011 - 55/+ 155 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ROX300100MGNF5 (preferred part numbering format) R O GLOBAL RESISTANCE VALUE MODEL (see Electrical R = Decimal Specifications K = Thousand table) M = Million G = Billion 910R = 910 10M0 = 10 M 1G00 = 1.0 G X 3 0 TOLERANCE CODE F=1% G=2% J=5% K = 10 % 0 1 0 TEMP. COEFFICIENT H = 50 ppm K = 100 ppm N = 200 ppm 0 M G N F PACKAGING** 5 SPECIAL CONSTRUCTION EL = Lead (Pb)-free, Lacer EE = Lead (Pb)-free, T/R (1000pcs) EM = Lead (Pb)-free, Foam LB = Tin/Lead, Lacer RF = Tin/Lead, T/R (1000pcs) F5 = Tin/Lead, Foam ( up to 2 digits) Blank = Standard (Dash Number) Blank = Standard (up to 3 digits) N = Non-inductive From P = 0.040 O leads 1-999 S = Solid Body, Axial T =Threaded Terminals as applicable Y = One end Axial, one Threaded Terminal Historical Part Number example: ROX-3100MGN (will continue to be accepted) ROX-3 HISTORICAL MODEL CONSTRUCTION 100M G N RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT F05 PACKAGING ** NOTE: Some packaging codes are model specific. * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 152 For technical questions, contact: ff2bresistors@vishay.com Document Number: 31033 Revision: 25-Aug-06 ROX Metal Oxide Resistors, Special Purpose, High Voltage Vishay Dale DIMENSIONS Styles N, P and S 0.032 0.002 [0.81 0.05] Dia. Style P has 0.040 [1.02] diameter leads. 0.310 [7.87] Max. Dia. A 1.50 [38.10] B Style Y Style T C Max. 0.032 [0.81] Dia. C UNC #6-32 2B 1.500 [38.10] UNC #6-32 2B 0.330 [8.38] Max. Dia. 0.330 [8.38] Max. Dia. DIMENSIONS in inches [millimeters] GLOBAL MODEL STYLE N, P, S A 0.550 0.032 [13.97 0.81] 0.800 0.032 [20.32 0.81] 0.920 0.032 [23.37 0.81] 1.550 0.032 [39.37 0.81] 2.050 0.032 [52.07 0.81] 3.050 0.032 [77.47 0.81] 4.050 0.032 [102.87 0.81] 5.050 0.032 [128.27 0.81] 6.050 0.032 [153.67 0.81] % RATED POWER ROX050 ROX075 ROX100 ROX150 ROX200 ROX300 ROX400 ROX500 ROX600 B 0.700 [17.78] 0.900 [22.86] 1.020 [25.91] 1.650 [41.91] 2.150 [54.61] 3.150 [80.01] 4.150 [105.41] 5.150 [130.81] 6.150 [156.21] STYLE T STYLE Y C N/A 1.168 0.022 [29.72 0.56] 1.288 0.022 [32.77 0.56] 1.918 0.022 [48.77 0.56] 2.418 0.022 [61.47 0.56] 3.418 0.022 [86.87 0.56] 4.418 0.022 [112.27 0.56] 5.418 0.022 [137.67 0.56] 6.418 0.022 [163.07 0.56] C MAX N/A 1.050 [26.67] 1.170 [29.72] 1.800 [45.72] 2.300 [58.42] 3.300 [83.82] 4.300 [109.22] 5.300 [134.62] 6.300 [160.02] 120 MECHANICAL SPECIFICATIONS 100 Terminal Strength: 10 pound pull test Solderability: Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 80 60 40 20 0 + 230 C 0 25 DERATING 100 200 250 AMBIENT TEMP. IN C MATERIAL SPECIFICATIONS Element: High temperature fired cermet film Core: High purity 96 % alumina, tubular or solid Coating: Blue flameproof on ROX050 thru ROX200. Black silicone on ROX300 thru ROX600 Termination: Standard lead material is solder - coated copper; solderable and weldable. 0.032" [0.813 mm] Style P 0.040" [1.02 mm] available Document Number: 31033 Revision: 25-Aug-06 For technical questions, contact: ff2bresistors@vishay.com www.vishay.com 153 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1