L4006L6TP - Littelfuse, Inc. - Datasheet.Directory

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Description

6 Amp bi-directional solid state switch series is designed

for AC switching and phase control applications such as

motor speed and temperature modulation controls, lighting

controls, and static switching relays.

Sensitive type devices guarantee gate control in

Quadrants I & IV needed for digital control circuitry.

Standard type devices normally operate in Quadrants I &

III triggered from AC line.

Alternistor type devices only operate in quadrants I, II, &

III and are used in circuits requiring high dv/dt capability.

Features & Beneﬁts

• RoHS compliant

• Glass – passivated

junctions

• Voltage capability up

to 1000 V

• Surge capability up

to 85 A

• Electrically isolated

“L - Package” is UL

recognized for 2500Vrms

• Solid-state switching

eliminates arcing or

contact bounce that

create voltage transients

• No contacts to wear out

from reaction of switching

events

• Restricted (or limited) RFI

generation, depending on

activation point of

sine wave

• Requires only a small gate

activation pulse in each

half-cycle

Main Features

Symbol Value Unit

IT(RMS) 6 A

VDRM /VRRM 400 to 1000 V

IGT (Q1) 5 to 50 mA

Schematic Symbol

MT2 MT1

Agency Approval

Agency Agency File Number

®L Package: E71639

Absolute Maximum Ratings — Sensitive Triac (4 Quadrants)

Symbol Parameter Value Unit

IT(RMS) RMS on-state current (full sine wave) Lxx06Ly TC = 80°C 6 A

Lxx06Vy / Lxx06Dy/ Lxx06Ry TC = 85°C

ITSM

Non repetitive surge peak on-state current

(full cycle, TJ initial = 25°C)

f = 50 Hz t = 20 ms 50 A

f = 60 Hz t = 16.7 ms 60

I2t I2t Value for fusing tp = 8.3 ms 15 A2s

di/dt Critical rate of rise of on-state current

IG = 50mA with 0.1µs rise time f = 120 Hz TJ = 110°C 70 A/μs

IGTM Peak gate trigger current tp ≤ 10 μs TJ = 110°C 1. 6 A

PG(AV) Average gate power dissipation TJ = 110°C 0.4 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 110 °C

Note: xx = voltage, y = sensitivity

Applications

Excellent for AC switching and phase control applications

such as heating, lighting, and motor speed controls.

Typical applications are AC solid-state switches, light

dimmers, power tools, home/brown goods and white

goods appliances.

Alternistor Triacs (no snubber required) are used in

applications with extremely inductive loads requiring

highest commutation performance.

Internally constructed isolated packages are offered for

ease of heat sinking with highest isolation voltage.

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Absolute Maximum Ratings — Standard Triac

Symbol Parameter Value Unit

IT(RMS) RMS on-state current (full sine wave)

Qxx06Ry / Qxx06Ny TC = 95°C

6 A

Qxx06Ly TC = 90°C

ITSM

Non repetitive surge peak on-state current

(full cycle, TJ initial = 25°C)

f = 50 Hz t = 20 ms 65

f = 60 Hz t = 16.7 ms 80

I2t I2t Value for fusing tp = 8.3 ms 26.5 A2s

di/dt Critical rate of rise of on-state current

IG = 200mA with 0.1µs rise time f = 120 Hz TJ = 125°C 70 A/μs

IGTM Peak gate trigger current tp ≤ 10 μs; IGT ≤ IGTM TJ = 125°C 1. 6 A

PG(AV) Average gate power dissipation TJ = 125°C 0.5 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 125 °C

Note: xx = voltage, y = sensitivity

Absolute Maximum Ratings — Alternistor Triac (3 Quadrants)

Symbol Parameter Value Unit

IT(RMS) RMS on-state current (full sine wave)

Qxx06LHy TC = 95°C

6 A

Qxx06RHy / Qxx06NHy

Qxx06VHy / Qxx06DHy TC = 100°C

ITSM

Non repetitive surge peak on-state current

(full cycle, TJ initial = 25°C)

f = 50 Hz t = 20 ms

Qxx06VHy

Qxx06DHy 55

Qxx06LHy

Qxx06RHy

Qxx06NHy

f = 60 Hz t = 16.7 ms

Qxx06VHy

Qxx06DHy 65

Qxx06LHy

Qxx06RHy

Qxx06NHy

I2t I2t Value for fusing tp = 8.3 ms

Qxx06VHy

Qxx06DHy 1 7. 5

A2s

Qxx06LHy

Qxx06RHy

Qxx06NHy

di/dt Critical rate of rise of on-state current f = 120 Hz TJ = 125°C 70 A/μs

IGTM Peak gate trigger current tp ≤ 10 μs; IGT ≤ IGTM TJ = 125°C 1. 6 A

PG(AV) Average gate power dissipation TJ = 125°C 0.5 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 125 °C

Note: xx = voltage, y = sensitivity

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) — Sensitive Triac (4 Quadrants)

Symbol Test Conditions Quadrant Value Unit

Lxx06x5 Lxx06x6 Lxx06x8

IGT VD = 12V RL = 60 Ω

I – II – III

IV MAX. 5

20 mA

VGT ALL MAX. 1. 3 V

VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C ALL MIN. 0.2 V

IHIT = 100mA MAX. 10 10 20 mA

dv/dt VD = VDRM Gate Open TJ = 100°C 400V TYP. 30 30 40 V/μs

600V 20 20 30

(dv/dt)c (di/dt)c = 3.2 A/ms TJ = 110°C TYP. 1 2 2 V/μs

tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 3.0 3.0 3.2 μs

Symbol Test Conditions Quadrant Value Unit

Qxx06x4 Qxx06x5

IGT VD = 12V RL = 60 Ω

I – II – III

MAX.

TYP.

75 mA

VGT I – II – III MAX. 1. 3 V

VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C ALL MIN. 0.2 V

IHIT = 200mA MAX. 50 50 mA

dv/dt VD = VDRM Gate Open TJ = 125°C

400V

MIN.

120

V/μs

600V 100

800V 85

VD = VDRM Gate Open TJ = 100°C 1000V 100

(dv/dt)c (di/dt)c = 3.2 A/ms TJ = 125°C TYP. 4 4 V/μs

tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 3.0 3.0 μs

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) — Alternistor Triac (3 Quadrants)

Symbol Test Conditions Quadrant Value Unit

Qxx06xH3 Qxx06xH4

IGT VD = 12V RL = 60 Ω I – II – III MAX. 10 35 mA

VGT I – II – III MAX. 1. 3 V

VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C I – II – III MIN. 0.2 V

IHIT = 100mA MAX. 15 35 mA

dv/dt VD = VDRM Gate Open TJ = 125°C

Qxx06VHy /

Qxx06DHy

MIN.

400V 75 400

V/μs

600V 50 300

800V 200

Qxx06LHy /

Qxx06RHy /

Qxx06NHy

400V 75 450

600V 50 350

800V 250

VD = VDRM Gate Open TJ = 100°C ALL 1000V 150

(dv/dt)c (di/dt)c = 3.2 A/ms TJ = 125°C MIN. 20 25 V/μs

tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 4.0 4.0 μs

Note: xx = voltage, x = package, y = sensitivity

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) — Standard Triac

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Static Characteristics

Symbol Test Conditions Value Unit

VTM ITM = 11.3A tp = 380 µs MAX. 1.60 V

IDRM / IRRM VDRM = VRRM

Lxx06xy

TJ = 25°C 400 - 600V

MAX.

20 μA

TJ = 110°C 400 - 600V 0.5 mA

Qxx06xy

TJ = 25°C 400 - 1000V 50 μA

TJ = 125°C 400 - 800V 2

TJ = 100°C 1000V 3

Qxx06xHy

TJ = 25°C

400 - 800V 10

μA

1000V 20

TJ = 125°C 400 - 800V 3

TJ = 100°C 1000V 2

Thermal Resistances

Symbol Parameter Value Unit

Rθ(J-C) Junction to case (AC)

L/Qxx06Ryy / L/Qxx06Nyy 1. 8

°C/WL/Qxx06Lyy 3.3

L/Qxx06Vyy / L/Qxx06Dyy 3.2

Rθ(J-A) Junction to ambient

L/Qxx06Ryy 45

°C/WL/Qxx06Lyy 50

L/Qxx06Vyy 70

Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

Figure 1: Deﬁnition of Quadrants Figure 2: Normalized DC Gate Trigger Current for

All Quadrants vs. Junction Temperature

Junction Temperature (TJ)- °C

-65 -40 -1510356085110 125

4.0

3.0

2.0

1.0

0.0

Ratio of

IGT

IGT (TJ = 25°C)

Note: Alternistors will not operate in QIV

MT2 POSITIVE

(Positive Half Cycle)

MT2 NEGATIVE

(Negative Half Cycle)

NOTE: Alternistors will not operate in QIV

MT1

MT2

+ IGT

REF QII

MT1

IGT

GATE

MT2

REF

MT1

MT2

REF

MT1

MT2

REF

QIV

QIII

ALL POLARITIES ARE REFERENCED TO MT1

(-)

IGT

GATE

(+)

IGT -

IGT

GATE

(-)

IGT

GATE

(+)

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Figure 3: Normalized DC Holding Current

vs. Junction Temperature

Figure 4: Normalized DC Gate Trigger Voltage for

All Quadrants vs. Junction Temperature

Junction Temperature (T

J)- °C

-65 -40 -1510356085110 125

4.0

3.0

2.0

1.0

0.0

Ratio of

IH (T

J = 25°C)

Junction Temperature (T

)- ºC

Ratio of

= 25°C)

110 12585603510-40-40-65

2.0

0.0

0.5

1.0

1.5

Figure 7: Maximum Allowable Case Temperature

vs. On-State Current (Standard Triac)

Figure 8: Maximum Allowable Case Temperature

vs. On-State Current (Alternistor Triac)

RMS On-State Current (IT(RMS)) - Amps

76543210

130

120

110

100

Maximum Allowable Case Te mperature

) - °C

Qxx06RHy

Qxx06NHy

Qxx06VHy

Qxx06DHy

Qxx06LHy

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawings

RMS On-State Current (IT(RMS)) - Amps

0246810 12 14 16

Average On-State Power Dissipation

(PD(AV)) - Watts

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

Figure 5: Power Dissipation (Typical)

vs. RMS On-State Current

Figure 6: Maximum Allowable Case Temperature

vs. On-State Current (Sensitive Triac)

RMS On-State Current (IT(RMS)) - Amps

76543210

120

110

100

Maximum Allowable Case Temperature

(TC) - °C

Lxx06Vy

Lxx06Dy

Lxx06Ry

Lxx06Ly

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawings

RMS On-State Current (I

T(RMS)

) - Amps

76543210

130

120

110

100

Maximum Allowable Case Te mperature

(TC) - °C

Qxx06Ly

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawings

Qxx06Ry

Qxx06Ny

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Figure 9: Maximum Allowable Ambient Temperature

vs. On-State Current (Sensitive / Standard Triac)

Figure 10: Maximum Allowable Ambient Temperature

vs. On-State Current (Alternistor Triac)

RMS On-State Current [IT(RMS)] - Amps

120

100

Maximum Allowable

Ambient Temperature (T

A) - °C

2.01.81.61.41.21.00.80.60.40.20.0

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

CASE TEMPERATURE: Measured as shown

on Dimensional Drawing

Qxx06LHy

Qxx06RHy

Qxx06NHy

Qxx06VHy

RMS On-State Current (IT(RMS)) - Amps

120

100

Maximum Allowable

Ambient Temperature (T

) - °C

2.01.81.61.41.21.00.80.60.40.20.0

Qxx06Ly

Qxx06Ry

Qxx06Ny

Lxx06Ly

Lxx06Ry

L/Qxx06Vy

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

FREE AIR RATING – NO HEATSINK

Figure 11: On-State Current vs. On-State Voltage

(Typical)

1.61. 51. 41.31.21.11.00.90.80.7

TC = 25°C

Postitive or Negative Instantaneous

On-State Voltage (vT) - Volts

Postitive or Negative Instantaneous

On-State Current (iT) - Amps

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Surge Current Duration- Full Cycles

Peak Surge (Non-Repetitive)

On-State Current (ITSM) - Amps

110100 1000

100

Qxx06Ly

Qxx06Ry

Qxx06Ny

Lxx06Ly

Lxx06Ry

Lxx06Vy

Lxx06Dy

Figure 12: Surge Peak On-State Current vs. Number of Cycles (Sensitive / Standard Triac)

SUPPLY FREQUENCY: 60 Hz Sinusoidal

LOAD: Resistive

RMS On-State Current: [IT(RMS)]: Maximum Rated

Value at Speciﬁed Case Temperature

Notes:

1. Gate control may be lost during and immediately

following surge current interval.

2. Overload may not be repeated until junction

temperature has returned to steady-state

rated value.

Surge Current Duration- Full Cycles

Peak Surge (Non-Repetitive)

On-State Current (ITSM) - Amps

110100 10 00

100

Qxx06LHy

Qxx06RHy

Qxx06NHy

Qxx06VHy

Qxx06DHy

Figure 13: Surge Peak On-State Current vs. Number of Cycles (Alternistor Triac)

SUPPLY FREQUENCY: 60 Hz Sinusoidal

LOAD: Resistive

RMS On-State Current: [IT(RMS)]: Maximum Rated

Value at Speciﬁed Case Temperature

Notes:

1. Gate control may be lost during and immediately

following surge current interval.

2. Overload may not be repeated until junction

temperature has returned to steady-state

rated value.

Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Soldering Parameters

Reﬂow Condition Pb – Free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp)

(TL) to peak 5°C/second max

TS(max) to TL - Ramp-up Rate 5°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Temperature (tL)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 5°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Physical Speciﬁcations Environmental Speciﬁcations

Test Speciﬁcations and Conditions

AC Blocking (VDRM)MIL-STD-750, M-1040, Cond A Applied

Peak AC voltage @ 125°C for 1008 hours

Temperature Cycling

MIL-STD-750, M-1051,

100 cycles; -40°C to +150°C; 15-min

dwell-time

Temperature/

Humidity

EIA / JEDEC, JESD22-A101

1008 hours; 320V - DC: 85°C; 85%

rel humidity

High Temp Storage MIL-STD-750, M-1031,

1008 hours; 150°C

Low-Temp Storage 1008 hours; -40°C

Thermal Shock

MIL-STD-750, M-1056

10 cycles; 0°C to 100°C; 5-min dwell-

time at each temperature; 10 sec (max)

transfer time between temperature

Autoclave

EIA / JEDEC, JESD22-A102

168 hours (121°C at 2 ATMs) and

100% R/H

Resistance to

Solder Heat MIL-STD-750 Method 2031

Solderability ANSI/J-STD-002, category 3, Test A

Lead Bend MIL-STD-750, M-2036 Cond E

Terminal Finish 100% Matte Tin-plated

Body Material UL recognized epoxy meeting ﬂammability

classication 94V-0

Terminal Material Copper Alloy

Design Considerations

Careful selection of the correct device for the application’s

operating parameters and environment will go a long way

toward extending the operating life of the Thyristor. Good

design practice should limit the maximum continuous

current through the main terminals to 75% of the device

rating. Other ways to ensure long life for a power discrete

semiconductor are proper heat sinking and selection of

voltage ratings for worst case conditions. Overheating,

overvoltage (including dv/dt), and surge currents are

the main killers of semiconductors. Correct mounting,

soldering, and forming of the leads also help protect

against component damage.

Time

Temperature

TS(max)

TS(min)

time to peak temperature

Preheat

eat

Ramp-upRamp-up

Ramp-down

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead

Dimension Inches Millimeters

Min Max Min Max

A0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C0.230 0.250 5.84 6.35

D0.590 0.620 14.99 15.75

E0.142 0.147 3.61 3.73

F0.110 0.130 2.79 3.30

G0.540 0.575 13.72 14.61

H0.025 0.035 0.64 0.89

J0.195 0.205 4.95 5.21

K0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M0.085 0.095 2.16 2.41

N0.018 0.024 0.46 0.61

O0.178 0.188 4.52 4.78

P 0.045 0.060 1. 14 1.52

R 0.038 0.048 0.97 1.22

Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab

Dimension Inches Millimeters

Min Max Min Max

A0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C0.230 0.250 5.84 6.35

D0.590 0.620 14.99 15.75

E0.142 0.147 3.61 3.73

F0.110 0.130 2.79 3.30

G0.540 0.575 13.72 14.61

H0.025 0.035 0.64 0.89

J0.195 0.205 4.95 5.21

K0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M0.085 0.095 2.16 2.41

N0.018 0.024 0.46 0.61

O0.178 0.188 4.52 4.78

P 0.045 0.060 1. 1 4 1.52

R 0.038 0.048 0.97 1.22

ØE

MEASURING POINT AREA (REF.) 0.17 IN

MT2

MT1 GATE

.320

8.13

.526

13.36

.276

7. 01

ØE

MEASURING POINT

MT2

MT1

.276

7. 01

.526

13.36

.320

8.13

GATE

AREA (REF.) 0.17 IN

NOTCH IN

GATE LEAD

TO ID.

NON-ISOLATED

TAB

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs, (0.904 Nm).

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs, (0.904 Nm).

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount

Dimensions — TO-251AA (V-Package) — V-PAK Through Hole

Dimension Inches Millimeters

Min Typ Max Min Typ Max

A 0.040 0.044 0.050 1.02 1. 11 1.27

B0.235 0.242 0.245 5.97 6.15 6.22

C0.350 0.361 0.375 8.89 9.18 9.53

D 0.205 0.208 0.213 5.21 5.29 5.41

E0.255 0.262 0.265 6.48 6.66 6.73

F 0.027 0.031 0.033 0.69 0.80 0.84

G 0.087 0.090 0.093 2.21 2.28 2.36

H0.085 0.092 0.095 2.16 2.34 2.41

I0.176 0.180 0.184 4.47 4.57 4.67

J 0.018 0.020 0.023 0.46 0.51 0.58

K0.038 0.040 0.044 0.97 1. 01 1. 12

L 0.018 0.020 0.023 0.46 0.52 0.58

P 0.042 0.047 0.052 1.06 1.20 1.32

Q0.034 0.039 0.044 0.86 1. 0 0 1. 11

R 0.034 0.039 0.044 0.86 1. 0 0 1. 11

S0.074 0.079 0.084 1.86 2.00 2.11

Dimension Inches Millimeters

Min Max Min Max

A0.360 0.370 9.14 9.40

B0.380 0.420 9.65 10.67

C0.178 0.188 4.52 4.78

D 0.025 0.035 0.64 0.89

E0.045 0.060 1. 14 1.52

F0.060 0.075 1.52 1.91

G 0.095 0.105 2.41 2.67

H 0.092 0.102 2.34 2.59

J 0.018 0.024 0.46 0.61

K0.090 0.110 2.29 2.79

S0.590 0.625 14.99 15.88

V0.035 0.045 0.89 1. 14

U 0.002 0.010 0.05 0.25

W 0.040 0.070 1.02 1.78

MT1

MT2

MEASURING POINT

.320

8.13

.276

7. 01 .331

8.41

GATE

.460

11.68

.665

16.89

.260

6.60

.150

3.81

.080

2.03

.085

2.16

.055

1.40

.350

8.89

.276

7. 01

.276

7. 01

AREA: 0.11 IN

AREA: 0.040 IN

MEASURING POINT

GATE G

5.28

.208

5.34

.210

MT2

MT1

MT2

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Dimensions — TO-252AA (D-Package) — D-PAK Surface mount

Dimension Inches Millimeters

Min Typ Max Min Typ Max

A 0.040 0.043 0.050 1.02 1.09 1.27

B0.235 0.243 0.245 5.97 6.16 6.22

C 0.106 0.108 0.113 2.69 2.74 2.87

D 0.205 0.208 0.213 5.21 5.29 5.41

E0.255 0.262 0.265 6.48 6.65 6.73

F 0.027 0.031 0.033 0.69 0.80 0.84

G 0.087 0.090 0.093 2.21 2.28 2.36

H0.085 0.092 0.095 2.16 2.33 2.41

I0.176 0.179 0.184 4.47 4.55 4.67

J 0.018 0.020 0.023 0.46 0.51 0.58

K0.038 0.040 0.044 0.97 1.02 1. 12

L 0.018 0.020 0.023 0.46 0.51 0.58

M0.000 0.000 0.004 0.00 0.00 0.10

N0.021 0.026 0.027 0.53 0.67 0.69

O 0° 0° 5° 0° 0° 5°

P 0.042 0.047 0.052 1.06 1.20 1.32

Q0.034 0.039 0.044 0.86 1. 0 0 1. 11

.118

.063

1.60

.071

1.80

.264

6.71

.264

6.71

.181

4.60

GATE

MT2

MT1

MT2

MEASURING POINT

5.28

.208

5.34

.210

: 0.040 IN

AREA

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Product Selector

Packing Options

Part Number Voltage Gate Sensitivity Quadrants Type Package

400V 600V 800V 1000V I - II - III IV

Lxx06L5 X X 5 mA 5 mA Sensitive Triac TO-220L

Lxx06D5 X X 5 mA 5 mA Sensitive Triac TO-252 D-PAK

Lxx06R5 X X 5mA 5mA Sensitive Triac TO-220R

Lxx06V5 X X 5 mA 5 mA Sensitive Triac TO-251 V-PAK

Lxx06L6 X X 5 mA 10 mA Sensitive Triac TO-220L

Lxx06D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK

Lxx06R6 X X 5mA 10mA Sensitive Triac TO-220R

Lxx06V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK

Lxx06L8 X X 10 mA 20 mA Sensitive Triac TO-220L

Lxx06D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK

Lxx06R8 X X 10mA 20mA Sensitive Triac TO-220R

Lxx06V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK

Qxx06VH3 X X 10 mA Alternistor Triac TO-251 V-PAK

Qxx06DH3 X X 10 mA Alternistor Triac TO-252 D-PAK

Qxx06L4 X25 mA Standard Triac TO-220L

Qxx06R4 X 25 mA Standard Triac TO-220R

Qxx06N4 X 25 mA Standard Triac TO-263 D²-PAK

Qxx06RH3 X X 10mA Alternistor Triac TO-220R

Qxx06LH4 X X X X 35 mA Alternistor Triac TO-220L

Qxx06RH4 X X X X 35 mA Alternistor Triac TO-220R

Qxx06VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK

Qxx06DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK

Qxx06NH4 X X X X 35 mA Alternistor Triac TO-263 D²-PAK

Qxx06L5 XXX 50 mA Standard Triac TO-220L

Qxx06R5 X X X 50 mA Standard Triac TO-220R

Qxx06N5 X X X 50 mA Standard Triac TO-263 D²-PAK

Part Number Marking Weight Packing Mode Base Quantity

Lxx06L/Ry Lxx06L/Ry 2.2 g Bulk 500

Lxx06L/RyTP Lxx06L/Ry 2.2 g Tube Pack 500 (50 per tube)

Lxx06DyTP Lxx06Dy 0.3 g Tube 750 (75 per tube)

Lxx06DyRP Lxx06Dy 0.3 g Embossed Carrier 2500

Lxx06VyTP Lxx06Vy 0.4 g Tube 750 (75 per tube)

Qxx06L/Ryy Qxx06L/Ryy 2.2 g Bulk 500

Qxx06L/RyyTP Qxx06L/Ryy 2.2 g Tube Pack 500 (50 per tube)

Qxx06NyyTP Qxx06Nyy 1.6 g Tube 500 (50 per tube)

Qxx06NyyRP Qxx06Nyy 1.6 g Embossed Carrier 500

Qxx06DyyTP Qxx06Dyy 0.3 g Tube 750 (75 per tube)

Qxx06DyyRP Qxx06Dyy 0.3 g Embossed Carrier 2500

Qxx06VyyTP Qxx06Vyy 0.4 g Tube 750 (75 per tube)

Note: xx = voltage; yy = sensitivity

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

0.512 (13.0) Arbor

Hole Dia.

XXXXXX

Gate MT1

MT2

0.63

(16.0)

0.157

(4.0)

0.64

(16.3)

12.99

(330.0)

0.524

(13.3)

0.315

(8.0)

0.059 DIA

(1.5)

* Cover tape

Direction of Feed

Dimensions

are in inches

(and millimeters).

Gate

MT1

MT2

0.512 (13.0) Arbor

Hole Dia.

0.945

(24.0)

0.63

(16.0)

1.01

(25.7)

12.99

(330.0)

0.827

(21.0)

0.157

(4.0)

Direction of Feed

Dimensions

are in inches

(and millimeters).

* Cover tape

0.059 DIA

(1.5)

TO-252 Embossed Carrier Reel Pack (RP) Speciﬁcations

Meets all EIA-481-2 Standards

TO-263 Embossed Carrier Reel Pack (RP) Speciﬁcations

Meets all EIA-481-2 Standards

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx06xx & Qxx06xx & Qxx06xHx Series

Part Numbering System Part Marking System

CURRENT

06: 6A

SENSITIVITY & TYPE

Sensitive Triac:

3 mA (QI, II, III, IV)

5 mA (QI, II, III, IV)

5 mA (QI, II, III)

10 mA (QIV)

10 mA (QI, II, III)

20 mA (QIV)

Standard Triac:

25 mA (QI, II, III)

50 mA (QI, II, III)

Alternistor Triac:

10 mA (QI, II, III)

35 mA (QI, II, III)

PACKAGE TYPE

L : TO-220 Isolated

R : TO-220 Non-Isolated

N : TO-263 (D

PAK)

V : TO-251 (VPAK)

D : TO-252 (DPAK)

VOLTAGE RATING

40 :

400V

60 :

600V

80 :

800V

K0 :

1000V

LEAD FORM DIMENSIONS

xx : Lead Form Option

Q 60 06 L H4 56

DEVICE TYPE

L :

Sensitive Triac

Triac or Alternistor

Q6006R5

L6006V5

YMLDD

TO-252AA –(D Package)

TO-251AA –(V Package)