2SB1617 TOSHIBA Transistor Silicon PNP Epitaxial Type (Darlington) 2SB1617 Micro Motor Drive, Hammer Drive Applications Power Switching Applications Power Amplifier Applications * High DC current gain: hFE = 2000 (min) (VCE = -2 V, IC = -1 A) * Low saturation voltage: VCE (sat) = -1.5 V (max) Unit: mm (IC = -1 A, IB = -1 mA) Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Collector-base voltage VCBO -100 V Collector-emitter voltage VCEO -100 V Emitter-base voltage VEBO -8 V Collector current IC (DC) -2 A Collector current IC (Pulse) -3 A Base current IB -0.5 A Collector power dissipation PC 1.3 W Junction temperature Tj 150 C Tstg -55 to 150 C Storage temperature range JEDEC JEITA TOSHIBA 2-8M1A Weight: 0.55 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit COLLECTOR BASE 4 k 800 EMITTER 1 2006-11-21 2SB1617 Electrical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = -80 V, IE = 0 -10 A Emitter cut-off current IEBO VEB = -8 V, IC = 0 -4 mA V (BR) CEO IC = -10 mA, IB = 0 -100 V Collector-emitter breakdown voltage DC current gain hFE VCE = -2 V, IC = -1 A 2000 Collector-emitter saturation voltage VCE (sat) IC = -1 A, IB = -1 mA -1.5 V Base-emitter saturation voltage VBE (sat) IC = -1 A, IB = -1 mA -2.0 V VCE = -2 V, IC = -0.5 A 50 MHz VCB = -10 V, IE = 0, f = 1 MHz 27 pF 0.4 2.0 0.4 Transition frequency fT Collector output capacitance Cob ton Storage time tstg Input IB2 20 s Output 30 Switching time IB1 IB2 Turn-on time IB1 s VCC = -30 V Fall time tf -IB1 = IB2 = 1 mA, duty cycle 1% Marking B1617 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SB1617 IC - VCE hFE - IC 10000 -4 Common emitter 5000 -1000 -3 -800 DC current gain hFE Collector current IC (A) Ta = 25C -500 -400 -2 -300 -250 3000 25 Ta = 100C -55 1000 500 300 Common emitter -1 VCE = -2 V IB = -200 A 0 0 -1 -2 -3 -4 Collector-emitter voltage 100 -0.03 -0.1 -0.3 Collector current IC -5 Base-emitter saturation voltage VBE (sat) (V) Collector-emitter saturation voltage VCE (sat) (V) IC/IB = 1000 -3 Ta = -55C 25 100 -0.5 -0.3 -0.5 -1 -3 Collector current IC -5 Common emitter IC/IB = 1000 Ta = -55C 25 100 -1 -0.3 (A) -0.5 -3 -5 150 175 (A) PC - Ta 1.6 -2.0 -1.5 -1.0 Ta = 100C 25 -55 -0.5 -0.4 -0.8 -1.2 -1.6 Base-emitter voltage -2.0 -2.4 (W) (A) VCE = -2 V 1.4 Collector power dissipation PC Common emitter Collector current IC -1 Collector current IC IC - VBE 0 0 (A) -3 -0.5 -5 -3.0 -2.5 -10 VBE (sat) - IC Common emitter -1 -3 VCE (V) VCE (sat) - IC -5 -1 1.2 1.0 0.8 0.6 0.4 0.2 0 0 -2.8 25 50 75 100 125 Ambient temperature Ta (C) VBE (V) 3 2006-11-21 2SB1617 rth - tw Transient thermal resistance rth (C/W) 300 Curves should be applied in thermal limited area. 100 (single nonrepetitive pulse) Ta = 25C 30 10 3 1 0.3 0.001 0.01 0.1 1 Pulse width 10 tw 100 1000 (s) Safe Operating Area -10 -3 IC max (pulsed)* 10 ms* IC max (continuous) 100 ms* 1 ms* Collector current IC (A) -1 -0.3 DC operation Ta = 25C -0.1 -0.03 -0.01 -0.003 -0.001 -0.3 *: Single nonrepetitive pulse Ta = 25C Curves must be derated linearly with increase in temperature. -1 -3 VCEO max -10 Collector-emitter voltage -30 -100 -300 VCE (V) 4 2006-11-21 2SB1617 RESTRICTIONS ON PRODUCT USE 20070701-EN * The information contained herein is subject to change without notice. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-21