KBP005M – KBP10M 1 of 3 © 2002 Won-Top Electronics
KBP005M – KBP10M
1.5A GLASS PASSIVATED BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction
! Low Forward Voltage Drop L A
! High Current Capability
! High Reliability
! High Surge Current Capability B J
! Ideal for Printed Circuit Boards + ~ ~ -
C K
Mechanical Data
! Case: Molded Plastic H I
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208 E
! Polarity: As Marked on Body G
! Weight: 1.7 grams (approx.) D
! Mounting Position: Any
! Marking: Type Number
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwis e specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol KBP
005M KBP
01M KBP
02M KBP
04M KBP
06M KBP
08M KBP
10M Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @T
A = 50°C IO1.5 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 50 A
Forward Voltage (per element) @IF = 1.5A VFM 1.1 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 10
500 µA
Rating for Fusing (t<8.3ms) I2t10 A2s
Typical J u nction Capac itance per element (Note 2) Cj15 pF
Typical Thermal Res istance (Note 3) RJA 28 K/W
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Leads maintained at ambient temperat ure at a distanc e of 9.5mm from the case.
2. Measured at 1.0 MHz and applied reverse volt age of 4.0V D.C.
3. Thermal resistance junct i on to ambient mounted on PC board with 12mm2 copper pad.
WTE
PO WER SEM IC OND UCTOR S
KBP
Dim Min Max
A14.22 15.24
B10.67 11.68
C15.2 —
D4.57 5.08
E3.60 4.10
G2.16 2.67
H0.76 0.86
I1.52 —
J11.68 12.7
K12.7 —
L3.2 x 45° Typical
All Dimensions in mm
0
0.1
1.0
10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
I , INSTANTANEOUS FWD CURRENT (A)
F
V , INSTANTANEOUS FWD VOLTAGE(V)
Fig. 2 Typical Fwd Characteristics
F
T = 150°C
J
T=25°C
J
Pulse Width
= 300 µs
0
10
20
30
40
50
1 10 100
I , PEAK FWD SURGECURRENT (A)
FSM
NUMBEROFCYCLES AT 60 Hz
Fi
g
. 3 Max Non-Repetitive PeakFwd Sur
g
e Current
T = 150°c
Single Half
Sine Wave
(JEDECMethod)
j
1
10
100
1 10 100
C, CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25°C
f = 1MHz
j
0.01
0.1
1.0
10
100
1000
10,000
0 20 40 60 80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (mA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
. 5 Typical Reverse Characteristics
T = 125ºC
j
T = 100ºC
j
T = 25ºC
j
T = 150ºC
j
0
0.5
1.0
1.5
2.0
0 50 100 150
I , AVERAGE RECTIFIED CURRENT (A)
O
T, TEMPERATURE(°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
KBP005M – KBP10M 2 of 3 © 2002 Won-Top Electronics
KBP005M – KBP10M 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
KBP005M SIL Bridge 1000 Units/Box
KBP01M SIL Bridge 1000 Units/Box
KBP02M SIL Bridge 1000 Units/Box
KBP04M SIL Bridge 1000 Units/Box
KBP06M SIL Bridge 1000 Units/Box
KBP08M SIL Bridge 1000 Units/Box
KBP10M SIL Bridge 1000 Units/Box
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http:// www.wontop.com
