© 2000 Fairchild Semiconductor Corporation DS009456 www.fairchildsemi.com
November 1984
Revised September 2000
74F04 Hex Inverter
74F04
Hex Inverter
General Description
This device con tains six indepe ndent gates, ea ch of which
performs the logi c INV ERT funct ion.
Ordering Code:
Devices also available in Tape and Reel. Speci fy by appe nding the s uffix let t er “X” to the o rdering code.
Logic Symbol
IEEE/IEC
Connection Diagram
Unit Loading/F an Out
Order Number Package Number Package Description
74F04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
74F04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74F04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Pin Names Description U.L. Input IIH/IIL
HIGH/LOW Output IOH/IOL
AnInputs 1.0/1.0 20 µA/−0.6 mA
OnOutputs 50/33.3 −1 mA/20 mA
www.fairchildsemi.com 2
74F04
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: Absolute maximum ratings are values beyond which the device
may be damaged or have its useful life impaired. Functional operation
under th es e conditi ons is not im plied.
Note 2: Eith er v oltage lim it or c urrent limit is sufficien t to prot ect inputs .
DC Electrical Characteristi cs
AC Electrical Characteristi cs
Stora ge Temperatu re −65°C to +150°C
Ambient Temperature under Bias −55°C to +125°C
Junct ion Temperatu re und er Bias −55°C to +150°C
VCC Pin Potential to Ground Pin −0.5V to +7.0V
Input Voltage (Note 2) −0.5V to +7.0V
Input Current (Note 2) −30 mA to +5.0 mA
Voltage Applied to Output
in HIGH State (with VCC = 0V)
Standard Output −0.5V to VCC
3-STATE Output −0.5V to +5.5V
Current Applied to Output
in LOW State (Max) twice the rated IOL (mA)
ESD Last Passing Voltage (Min) 4000V
Free Air Ambient Temperature 0°C to +70°C
Supply Voltage +4.5V to +5.5V
Symbol Parameter Min Typ Max Units VCC Conditions
VIH Input HIGH Voltage 2.0 V Recognized as a HIGH Signal
VIL Input LOW Voltage 0.8 V Recognized as a LOW Signal
VCD Input Clamp Diode Voltage −1.2 V Min IIN = −18 mA
VOH Output HIGH 10% VCC 2.5 VMin
IOH = −1 mA
V o lt age 5% VCC 2.7 IOH = −1 mA
VOL Output LOW 10% VCC 0.5 V Min IOL = 20 mA
Voltage
IIH Input HIGH 5.0 µAMaxV
IN = 2.7V
Current
IBVI Input HIGH Current 7.0 µAMaxV
IN = 7.0V
Breakdown Test
ICEX Output HIGH 50 µAMaxV
OUT = VCC
Leakage Current
VID Input Leakage 4.75 V 0.0 IID = 1.9 µA
Test All other pins grounded
IOD Output Leakage 3.75 µA0.0
VIOD = 150 mV
Circuit Current All other pins grounded
IIL Input LOW Current −0.6 mA Max VIN = 0.5V
IOS Output Short-Circuit Current −60 −150 mA Max VOUT = 0V
ICCH Power Supply Current 2.8 4.2 mA Max VO = HI G H
ICCL Power Supply Current 10.2 15.3 mA Max VO = LOW
Symbol Parameter
TA = +25°CT
A = −55°C to +125°CT
A = 0°C to +70°C
Units
VCC = +5.0V VCC = +5.0V VCC = +5.0V
CL = 50 pF CL = 50 pF CL = 50 pF
Min Typ Max Min Max Min Max
tPLH Propagation Delay 2.4 3.7 5.0 2.0 7.0 2.4 6.0 ns
tPHL An to On1.5 3.2 4.3 1.5 6.5 1.5 5.3
3 www.fairchildsemi.com
74F04
Physical Dim ensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
Package Number M14A
www.fairchildsemi.com 4
74F04
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Sma ll Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
5 www.fairchildsemi.com
74F04 Hex Inverter
Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume an y responsibility for u se of any circuitry descr ibed, no circuit pat ent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syst ems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instruct ions fo r use pr ovi de d in the l abe ling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A crit ical componen t in any com ponen t of a life s uppor t
device or system whose failure to perform can be rea-
sonabl y e xpec ted to cause th e fa i lure of the l ife s upport
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
