Document 102-1 Chip Inductors - 1008CT Series (2520) The 0.055 profile makes these parts ideal for low clearance applications. Their simple construction ensures high reliability and stability, and they feature much Part number1 1008CT-040X_L_ 1008CT-080X_L_ 1008CT-100X_L_ 1008CT-150X_L_ 1008CT-200X_L_ 1008CT-300X_L_ 1008CT-400X_L_ 1008CT-500X_L_ 1008CT-600X_L_ 1008CT-700X_L_ 1008CT-800X_L_ 1008CT-900X_L_ 1008CT-101X_L_ Inductance2 (nH) 4.7 @ 50 MHz 8.2 @ 50 MHz 10 @ 50 MHz 15 @ 50 MHz 20 @ 50 MHz 30 @ 50 MHz 40 @ 50 MHz 50 @ 50 MHz 60 @ 50 MHz 70 @ 50 MHz 80 @ 50 MHz 90 @ 50 MHz 100 @ 50 MHz Percent3 tolerance 5 5,2 5 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 1. When ordering, specify tolerance, termination and packaging codes: 1008CT-101XJLC F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Tolerance: higher SRF values than ferrite alternatives. For free evaluation samples, visit www.coilcraft.com or contact Coilcraft. Q min4 28 @ 500 MHz 40 @ 500 MHz 40 @ 500 MHz 40 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 65 @ 500 MHz 60 @ 500 MHz SRF min5 (MHz) 7500 5000 2700 3000 2400 2400 2000 1900 1800 1700 1400 1400 1000 Irms7 (mA) 600 600 600 600 600 600 600 600 600 510 510 500 480 Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 17.8 - 17.8 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000/7reel; 7500/13 reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth PCB washing Only pure water or alcohol recommended Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2009 DCR max6 (Ohms) 0.15 0.22 0.25 0.22 0.33 0.38 0.43 0.48 0.52 0.55 0.56 0.61 0.63 Document 102-1 Revised 10/06/08 Document 102-2 1008CT Series (2520) Typical Q vs Frequency Typical L vs Frequency 120 100 100 90 100 80 nH 80 60 nH 90 Inductance (nH) Q Factor 80 60 nH 70 80 nH 60 4.7 nH 50 30 nH 40 70 60 50 30 nH 40 30 30 20 20 10 10 4.7 nH 0 0 10 100 1000 10 1 10000 100 1000 10000 Frequency (MHz) Frequency (MHz) Irms Derating B overall 120 110 A H C F I G J F 90 I E terminal 80 D Terminal wraparound: approx 0.015/0,38 both ends 70 Recommended Land Pattern 60 50 A max 40 B max C max D ref E F G H I J 0.115 0.110 0.050 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches 30 25C Percent of rated Irms 100 20 2,92 2,79 1,27 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (C) Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2009 Document 102-2 Revised 10/06/08