Automotive Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE Automotive Series RoHS P6KE Automotive Series Description The P6KE Automotive Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features * Low incremental surge resistance * Typical IR less than 1A above 13V VBR = 0.1% x VBR@25C x T * High temperature soldering guaranteed: * Glass passivated chip 260C/40 seconds / junction in DO-15 Package 0.375",(9.5mm) lead * 600W peak pulse length, 5 lbs., (2.3kg) capability at 10x1000s tension waveform, repetition rate * Plastic package has (duty cycles):0.01% Underwriters Laboratory * Fast response time: Flammability classification typically less than 1.0ps 94V-O from 0 Volts to BV min * Matte Tin Lead-free plated * Excellent clamping capability Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 600 W Steady State Power Dissipation on inifinite heat sink at TL=75C (Fig. 5) PD 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) IFSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional only VF 3.5 V TJ , TSTG -55 to 175 C Typical Thermal Resistance Junction to Lead RuJL 20 C/W Typical Thermal Resistance Junction to Ambient RuJA 75 C/W Peak Pulse Power Dissipation by 10x1000s test waveform (Fig.1) (Note 1) Operating Junction and Storage Temperature Range Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/P6KEAUTO.html for current information. P6KE Automotive Series Revised: August 30, 2009 9:24 AM P6KE Automotive Series * Halogen-Free * RoHS compliant * Typical maximum temperature coefficient Automotive Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE Automotive Series Electrical Characteristics Breakdown Voltage VBR (Volts) @ IT Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR@ VR (A) MIN MAX Test Current IT (mA) 10.20 11.40 12.60 1 16.7 36.5 5 X P6KE13CAAUTO 11.10 12.40 13.70 1 18.2 33.5 1 X P6KE15AAUTO P6KE15CAAUTO 12.80 14.30 15.80 1 21.2 28.8 1 X P6KE16AAUTO P6KE16CAAUTO 13.60 15.20 16.80 1 22.5 27.1 1 X P6KE18AAUTO P6KE18CAAUTO 15.30 17.10 18.90 1 25.2 24.2 1 X P6KE20AAUTO P6KE20CAAUTO 17.10 19.00 21.00 1 27.7 22.0 1 X P6KE22AAUTO P6KE22CAAUTO 18.80 20.90 23.10 1 30.6 19.9 1 X P6KE24AAUTO P6KE24CAAUTO 20.50 22.80 25.20 1 33.2 18.4 1 X P6KE27AAUTO P6KE27CAAUTO 23.10 25.70 28.40 1 37.5 16.3 1 X P6KE30AAUTO P6KE30CAAUTO 25.60 28.50 31.50 1 41.4 14.7 1 X P6KE33AAUTO P6KE33CAAUTO 28.20 31.40 34.70 1 45.7 13.3 1 X P6KE36AAUTO P6KE36CAAUTO 30.80 34.20 37.80 1 49.9 12.2 1 X P6KE39AAUTO P6KE39CAAUTO 33.30 37.10 41.00 1 53.9 11.3 1 X P6KE43AAUTO P6KE43CAAUTO 36.80 40.90 45.20 1 59.3 10.3 1 X P6KE47AAUTO P6KE47CAAUTO 40.20 44.70 49.40 1 64.8 9.4 1 X Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) P6KE12AAUTO P6KE12CAAUTO P6KE13AAUTO Agency Approval For parts without A , the VBR is 10% and VC is 5% higher than with A parts P6KE Automotive Series Revised: August 30, 2009 9:24 AM (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/P6KEAUTO.html for current information. Automotive Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE Automotive Series Ratings and Characteristic Curves (T =25C unless otherwise noted) A Non-repetitive Pulse Waveform shown in Fig 3. TA=25uC 10 1 0.1 0.1s 1.0s 10s 100s 1.0ms 100 75 50 25 0 0 10ms td- Pulse Width (sec.) TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 175 200 Peak Value IPPM 100 Bi-directional V=0V Uni-directional @VR Half Value IPPM IPPM ( ) 2 50 100 10/1000sec. Waveform as defined by R.E.A 1.0 2.0 3.0 Bi-directional @VR 10 td 0 Uni-directional V=0V 1000 Cj (pF) IPPM- Peak Pulse Current, % IRSM 100 125 150 10000 tr=10sec Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) t-Time (ms) Figure 6 - Maximum Non-Repetitive Forward Surge Current Figure 5 - Steady State Power Derating Curve 6 120 IFSM - Peak Forward Surge Current (A) Steady State Power Dissipation (W) 75 Figure 4 - Typical Junction Capacitance Uni-Directional 150 5 100 4 3 2 L = 0.375" (9.5mm) Lead Lengths 1 0 50 TA- Ambient Temperature (oC) Figure 3 - Pulse Waveform 0 25 0 25 50 75 100 125 150 175 200 TL-Lead Temperature(C) (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/P6KEAUTO.html for current information. 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz P6KE Automotive Series Revised: August 30, 2009 9:24 AM P6KE Automotive Series PPPM- Peak Pulse Power (kW) 100 Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage, % Figure 1 - Peak Pulse Power Rating Automotive Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE Automotive Series Soldering Parameters Lead-free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow tp TP Temperature (T) Reflow Condition tL Ts(max) Ramp-down Ts(min) ts Preheat 25C - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds t 25C to Peak Time (t) Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6C/second max Peak Temperature : 265OC Time 25C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 280C Soldering : 1 time Physical Specifications Critical Zone TL to TP Environmental Specifications Weight 0.015oz., 0.4g Temperature Cycle JESD22-A104 Case JEDEC DO-204AC (DO-15) molded plastic body over passivated junction. Pressure Cooker JESD 22-A102 Polarity Color band denotes the cathode except Bipolar. High Temp. Storage JESD22-A103 Terminal Matte Tin axial leads, solderable per JESD22-B102D. HTRB JESD22-A108 Thermal Shock JESD22-A106 Dimensions Dimensions D C A B A A Inches Millimeters Min Max Min Max 1.000 - 25.40 - B 0.230 0.300 5.80 7.60 C 0.028 0.034 0.71 0.86 D 0.104 0.140 2.60 3.60 DO-204AC (DO-15) P6KE Automotive Series Revised: August 30, 2009 9:24 AM (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/P6KEAUTO.html for current information. Automotive Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE Automotive Series Part Numbering System Part Marking System P6KE xxx XX AUTO -X Cathode Band P6KEXXX AUTO OPTION CODE: BLANK Reel Tape -B Bulk Packaging TYPE CODE: A Uni-Directional (5% Voltage Tolerance) CA Bi-Directional F VOLTAGE CODE (Refer to the Electrical Characteristics table) Littelfuse Logo Product Type SERIES CODE Component Package Quantity Packaging Option Packaging Specification P6KExxxXXAUTO DO-204AC 4000 Tape & Reel EIA STD RS-296E P6KExxxXXAUTO-B DO-204AC 1000 BULK Littelfuse Concord Packing Spec. DM-0016 Part Number (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/P6KEAUTO.html for current information. P6KE Automotive Series Revised: August 30, 2009 9:24 AM P6KE Automotive Series Packaging (c)2009 Littelfuse, Inc. Revised: August 30, 2009 9:24 AM