
Height: 5.1 Max
Footprint: 10.5mm x 10.3mm Max
Current Rating: up to 7.8A
Inductance Range: 1.5uH to 470uH
Electrical Specifications @ 25°C — Operating Temperature -40°C to 125°C
PART NUMBER Inductance
100 KHz, 100 mV
(uH ±20%)
Rated
Current
(A)
DCR
(mOHMS MAX)
Saturation Current (Typical) A Heating Current
10% Drop 20% Drop 30% Drop 20°C Rise 40°C Rise
PA4321.152NLT 1.5 7.80 5.1 5.44 7.80 10.5 7.41 10.80
PA4321.332NLT 3.3 6.32 10 4.62 6.32 7.38 5.04 7.22
PA4321.103NLT 10 3.84 23 3.08 3.84 4.32 3.99 4.79
PA4321.333NLT 33 2.14 68 1.66 2.14 2.42 2.12 2.80
PA4321.683NLT 68 1.60 176 1.28 1.60 1.70 1.39 1.88
PA4321.104NLT 100 1.20 224 0.99 1.20 1.36 1.09 1.48
PA4321.334NLT 330 0.69 748 0.57 0.69 0.76 0.57 0.82
PA4321.474NLT 470 0.52 886 0.43 0.52 0.62 0.50 0.72
NOTES:
1. Actual temperature of the component during system operation (ambient plus temperature rise)
must be within the standard operating range.
2. The Saturation Current is the current at which the initial inductance drops approximately by
the value shown at the stated ambient temperature. This current is determined by placing the
component in the specified ambient environment and applying a short duration pulse current
(to eliminate self-heating effect) to the component.
3. The Rated Current the value shown is the DC current required to raise the component tempera-
ture by the value shown. Take note that the component’s performance varies depending on the
system condition. It is suggested that the component be tested at the system level, to verify the
temperature rise of the component during system operation.
4. The inductance tolerance of the .152NLT and .332NLT is ± 30% all other values are ±20%.
Mechanical Schematic
PA4321.XXXNLT
1power.pulseelectronics.com P788.D (04/19) http://www.power.pulseelectronics.com/contact
Shielded Drum Core Inductor
PA4321 Series