OUTPUT SPECIFICATIONS
Line regulation Single outputs ±0.5%
LL to HL, FL Multi's: +5V output ±0.5%
Multi's: aux. outputs ±1.0%
Total regulation Single outputs ±4.0%
No load to full load Multi's: +5V output +6.0%/-4.0%
(See Note 5) Multi's: aux. outputs +7%/-5%
Overshoot/Undershoot At turn on 10%
Transient response +5V output ±250mV max. dev.,
(40% FL to 60% 1ms recovery
full load step) to 1.0%
Temperature coefficient ±0.02%/°C, max.
Overvoltage protection +5V Output (See Note 8) 6.25V ±0.65V
Output power limit Primary power limited 80W Pin max.
40W Pout min.
Short circuit protection Continuous
with auto-restart
Green LED indicator (See Note 6) Normally ON
INPUT SPECIFICATIONS
Input voltage range Universal input 90 to 264VAC
Input frequency range 47Hz to 63Hz
Input surge current 36A max.
Safety ground 110VAC, 60Hz 0.2mA
leakage current 230VAC, 50Hz 0.4mA
EMC CHARACTERISTICS
Radiated noise EN55022, EN55011, FCC P15 Level B
Conducted noise EN55022, EN55011, FCC P15 Level B
Electrostatic discharge EN61000-4-2 Level 4
Electrostat. air discharge IEC801-2 Level 3
RF field susceptibility IEC801-3 Level 2
Electrical fast EN61000-4-4 Level 3
transients/bursts
Surge susceptibility EN61000-4-5 Level 3
SCL25 SERIES
Single and dual output
[2YEAR WARRANTY ]
•6.32 x 3.35 x 1.5 inch enclosure
•25W external power supply
•Molded UL94V-0 plastic enclosure
•Output connector options
•Stand alone ‘listed’ equipment
•Short circuit protection
•EN55022, EN55011 conducted emissions level B
•UL, CSA and VDE safety approvals
•Available RoHS compliant
The SCL25 series is a 25W universal input AC/DC external power supply in a 6.32 x
3.35 x 1.5 inch plastic enclosure. The SCL25 series has a single output and dual
output model in a low profile package providing a pre-approved external power
solution for a host of worldwide low power portable and desktop applications. The
SCL25 provides 25W of output power with free air convection cooling which can peak
at30W for 60 seconds. Standard features include universal input, short circuit
protection and EN55022 conducted emissions level B. The series, with full
international safety approval and the CE mark, provides pre-approved SELV outputs
without the need for further safety approval or mechanical integration into the
application system. The SCL25 series is designed for use in low power, and desktop
data networking, computer and industrial applications requiring external power
adapters in a low profile package.
SPECIFICATION
All specifications are typical at nominal input, full load at 25°Cunless otherwise stated
PAGE 1
GENERAL SPECIFICATIONS
Hold-up time 110VAC 10ms
230VAC 60ms
Efficiency 110VAC and 230VAC 70% typical
Isolation voltage Input/output 3000VAC
Input/chassis 1500VAC
Switching frequency Variable 35kHz to 80kHz
Approvals and VDE0805, EN60950
standards IEC950, UL1950, BABT
CSA C22.2 No. 950
Case Material General Electric Lexan, Black
Flammability rated UL94V-0
Weight 450g (15.9oz)
MTBF MIL-HDBK-217F 150,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating, 0°C to +40°C
full load, no derating
Non-operating –40°C to +85°C
0°Cto +40°Cambient, 25W
convection cooled
Peak (0°Cto +40°C, max. 60s) 30W
(See Note 3)
Relative humidity Non-condensing 5% to 95% RH
Altitude Operating 10,000 feet max.
Non-operating 30,000 feet max.
Vibration Three orthogonal axes 2.4G rms
(5Hz to 500Hz) random vibration,
10 minute test for each axis