ESD Leaded Schottky Barrier Rectifiers
QW-BB059 Page 1
REV: A
Maximum Rating and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol Unit
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C, See Figure 1
Peak forward surge current
8.3ms single half sine-wave superimposed on rated load
(JEDEC method) TL=110°C
Maximum f 1.0A (Note 1)orward voltage at
Maximum DC reverse current TA=25°C
At rated DC blocking voltage TA=100°C
Typical junction capacitance (Note 2)
Operating junction temperature range
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
CJ
TJ
-65 to +150
V
V
V
A
A
V
pF
°C/W
mA
NOTES:
1. Pulse test : 300µS pulse width, 1% duty cycle.
2. .Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
Voltage: 20 to 100 V
Current: 1.0 A
RoHS Device
SB120E-G Thru. SB1100E-G
Dimensions in inches and (millimeter)
DO-41
Storage temperature range
Comchip Technology CO., LTD.
3. Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted 0.375” (9.5mm) lead length
TSTG
°C
°C
Typical t (Note 3)hermal resistance RθJA
RθJL
20
20 40
40 45
45 50
50 60
60 80
80 100
100
14 28 30 35 42 56 70
1.0
-65 to +150-65 to +125
5
10
80.0
30.0
0.5
0.50 0.850.70
110
30
1.0(25.4) Min.
1.0(25.4) Min.
0.205(5.2)
0.160(4.1)
0.106(2.7)
0.079(2.0)
0.034(0.86)
0.001(0.70)
Features
Mechanical data
- .Low drop down voltage
- .1.0A operation at TA=75°C with no thermal runaway
-For use in low voltage, high frequency invertors free
.wheeling and polarity protection
- .Silicon epitaxial planar chips
- .Lead-free part, meet RoHS requirements
-Epoxy: UL94-V0 rated flame retardant
-Case: Molded plastic body DO-41
-Terminals: Solderable per MIL-STD-750 Method 2026
-Polarity: Color band denotes cathode end
-Mounting Position: Any
-Weight: 0.34 grams
SB
120E-G SB
140E-G SB
145E-G SB
150E-G SB
160E-G SB
1100E-G
SB
180E-G
- ESD test under IEC6100-4-2 :
Standard: >15KV(Air) & 8KV(Contact)
Company reserves the right to improve product design , functions and reliability without notice.