https://www.phoenixcontact.com/us/produkte/2859699 Type 2 surge protection connector - VAL-CP-N/PE-350ST - 2859699 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Type 2 replacement arrester plug with N-PE spark gap Key commercial data Packing unit 1 Minimum order quantity 1 Catalog page Page 32 (TT-2011) GTIN Custom tariff number 85363030 Country of origin GERMANY Technical data Standards Housing material PBT Inflammability class according to UL 94 V0 Color gray Standards for air and creepage distances DIN VDE 0110-1 Standards for air and creepage distances IEC 60664-1 Standards for air and creepage distances IEC 61643-1 Surge voltage category III Pollution degree 2 Degree of protection IP20 Mounting type On base element Design DIN rail module, two-section, divisible Number of positions 1 Ambient temperature (operation) -40 C ... 80 C Message: Surge protection fault Optical 05.12.2012 Page 1 / 5 https://www.phoenixcontact.com/us/produkte/2859699 Type 2 surge protection connector - VAL-CP-N/PE-350ST - 2859699 Technical data Standards Direction of action N-PE Protective circuit IEC category II IEC category T2 EN type T2 Nominal voltage UN 240 V AC Arrester rated voltage UC 264 V AC Arrester rated voltage UC (N-PE) 264 V AC UT (TOV-proof) 1200 V AC (200 ms / N-PE) Nominal frequency fN 50 Hz Nominal frequency fN 60 Hz Ground conductor current IPE 1 A Standby power consumption PC 0.26 mVA Max. discharge surge current Imax (8/20) s 40 kA Max. discharge surge current Imax (8/20) s maximum (N-PE) 40 kA Nominal discharge surge current In (8/20) s 20 kA Nominal discharge surge current In (8/20) s (N-PE) 20 kA Impulse operate voltage at 6 kV (1.2/50)s 1.5 kV Impulse operate voltage at 6 kV (1.2/50)s (N-PE) 1.5 kV Protection level Up 1.5 kV Protection level UP (N-PE) 1.5 kV Residual voltage 0.5 kV (at In) Residual voltage 0.3 kV (at 10 kA) Residual voltage 0.25 kV (at 5 kA) Residual voltage 0.2 kV (at 3 kA) Clamping voltage ringwave 1.5 kV (category C3 20 kV/10 kA) Clamping voltage ringwave 1.3 kV (category C2 10 kV/5 kA) Clamping voltage ringwave 1.2 kV (category B3/C1 6 kV/3 kA) Response time 100 ns Response time (N-PE) 100 ns Short-circuit resistance IP with max. backup fuse (effective) 25 kA Follow current quenching capacity If 100 A Connection, protective circuit Connection type IN FLASHTRAB/VALVETRAB plug-in system Connection type OUT FLASHTRAB/VALVETRAB plug-in system Standards Standards/regulations IEC 61643-1 2005 Standards/regulations DIN EN 61643-11 2002 Standards/regulations DIN EN 61643-11/A11 2007 05.12.2012 Page 2 / 5 https://www.phoenixcontact.com/us/produkte/2859699 Type 2 surge protection connector - VAL-CP-N/PE-350ST - 2859699 Technical data Standards Standards/regulations UL 1449 Standards/regulations IEEE C62.1 / C62.34 / C62.45 Classifications ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 UNSPSC UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / cUL Recognized / GOST / GL / IECEE CB Scheme / cULus Recognized Ex Approvals Approvals submitted Approval details 05.12.2012 Page 3 / 5 https://www.phoenixcontact.com/us/produkte/2859699 Type 2 surge protection connector - VAL-CP-N/PE-350ST - 2859699 Approvals UL Recognized KEMA-KEUR cUL Recognized GOST GL IECEE CB Scheme cULus Recognized Accessories Accessories Marking Zack Marker strip, flat - ZBF 12:UNBEDRUCKT - 0809735 Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 5.15 x 12.15 mm 05.12.2012 Page 4 / 5 https://www.phoenixcontact.com/us/produkte/2859699 Type 2 surge protection connector - VAL-CP-N/PE-350ST - 2859699 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Flat zack marker sheet - ZBFM 5/WH:UNBEDRUCKT - 0803595 Flat zack marker sheet, Sheet, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 5.2 mm, Lettering field: 5 x 4.5 mm (c) Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 05.12.2012 Page 5 / 5