https://www.phoenixcontact.com/us/produkte/2859699
05.12.2012Page1/5
Type 2 surge protection connector-VAL-CP-N/PE-350-
ST-2859699
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Type 2 replacement arrester plug with N-PE spark gap
Key commercial data
Packing unit 1
Minimum order quantity 1
Catalog page Page 32 (TT-2011)
GTIN
Custom tariff number 85363030
Country of origin GERMANY
Technical data
Standards
Housing material PBT
Inflammability class according to UL 94 V0
Color gray
Standards for air and creepage distances DIN VDE 0110-1
Standards for air and creepage distances IEC 60664-1
Standards for air and creepage distances IEC 61643-1
Surge voltage category III
Pollution degree 2
Degree of protection IP20
Mounting type On base element
Design DIN rail module, two-section, divisible
Number of positions 1
Ambient temperature (operation) -40 °C ... 80 °C
Message: Surge protection fault Optical
https://www.phoenixcontact.com/us/produkte/2859699
05.12.2012Page2/5
Type 2 surge protection connector-VAL-CP-N/PE-350-
ST-2859699
Technical data
Standards
Direction of action N-PE
Protective circuit
IEC category II
IEC category T2
EN type T2
Nominal voltage UN240 V AC
Arrester rated voltage UC264 V AC
Arrester rated voltage UC (N-PE) 264 V AC
UT (TOV-proof) 1200 V AC (200 ms / N-PE)
Nominal frequency fN50 Hz
Nominal frequency fN60 Hz
Ground conductor current IPE ≤ 1 µA
Standby power consumption PC≤ 0.26 mVA
Max. discharge surge current Imax (8/20) µs 40 kA
Max. discharge surge current Imax (8/20) µs maximum (N-PE) 40 kA
Nominal discharge surge current In (8/20) µs 20 kA
Nominal discharge surge current In (8/20) µs (N-PE) 20 kA
Impulse operate voltage at 6 kV (1.2/50)µs ≤ 1.5 kV
Impulse operate voltage at 6 kV (1.2/50)µs (N-PE) ≤ 1.5 kV
Protection level Up≤ 1.5 kV
Protection level UP (N-PE) ≤ 1.5 kV
Residual voltage ≤ 0.5 kV (at In)
Residual voltage ≤ 0.3 kV (at 10 kA)
Residual voltage ≤ 0.25 kV (at 5 kA)
Residual voltage ≤ 0.2 kV (at 3 kA)
Clamping voltage ringwave ≤ 1.5 kV (category C3 20 kV/10 kA)
Clamping voltage ringwave ≤ 1.3 kV (category C2 10 kV/5 kA)
Clamping voltage ringwave ≤ 1.2 kV (category B3/C1 6 kV/3 kA)
Response time ≤ 100 ns
Response time (N-PE) ≤ 100 ns
Short-circuit resistance IP with max. backup fuse (effective) 25 kA
Follow current quenching capacity If 100 A
Connection, protective circuit
Connection type IN FLASHTRAB/VALVETRAB plug-in system
Connection type OUT FLASHTRAB/VALVETRAB plug-in system
Standards
Standards/regulations IEC 61643-1 2005
Standards/regulations DIN EN 61643-11 2002
Standards/regulations DIN EN 61643-11/A11 2007
https://www.phoenixcontact.com/us/produkte/2859699
05.12.2012Page3/5
Type 2 surge protection connector-VAL-CP-N/PE-350-
ST-2859699
Technical data
Standards
Standards/regulations UL 1449
Standards/regulations IEEE C62.1 / C62.34 / C62.45
Classifications
ETIM
ETIM 2.0 EC000941
ETIM 3.0 EC000941
ETIM 4.0 EC000941
ETIM 5.0 EC000941
UNSPSC
UNSPSC 11 39121610
UNSPSC 12.01 39121610
UNSPSC 13.2 39121620
UNSPSC 6.01 30212010
UNSPSC 7.0901 39121610
eCl@ss
eCl@ss 4.0 27140201
eCl@ss 4.1 27130801
eCl@ss 5.0 27130801
eCl@ss 5.1 27130801
eCl@ss 6.0 27130805
eCl@ss 7.0 27130805
Approvals
Approvals
Approvals
UL Recognized / KEMA-KEUR / cUL Recognized / GOST / GL / IECEE CB Scheme / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
https://www.phoenixcontact.com/us/produkte/2859699
05.12.2012Page4/5
Type 2 surge protection connector-VAL-CP-N/PE-350-
ST-2859699
Approvals
UL Recognized
KEMA-KEUR
cUL Recognized
GOST
GL
IECEE CB Scheme
cULus Recognized
Accessories
Accessories
Marking
Zack Marker strip, flat-ZBF 12:UNBEDRUCKT-0809735
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, For terminal block width: 12 mm, Lettering field: 5.15 x 12.15 mm
https://www.phoenixcontact.com/us/produkte/2859699
05.12.2012Page5/5
Type 2 surge protection connector-VAL-CP-N/PE-350-
ST-2859699
Accessories
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line
thickness 0.35 mm
Flat zack marker sheet-ZBFM 5/WH:UNBEDRUCKT-0803595
Flat zack marker sheet, Sheet, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, For terminal block width: 5.2 mm, Lettering field: 5 x 4.5 mm
© Phoenix Contact 2012 - all rights reserved
http://www.phoenixcontact.com