TEN15-1213 - TRACO ELECTRONIC AG - Datasheet.Directory

http://www.tracopower.com Page 1 of 4

Features

◆ Wide 2:1 input range

◆ High efﬁciency up to 88%

◆ Extended operating temperature range

–40°C to +85°C

◆ Indeﬁnite short circuit protection

◆ I/O isolation 1500 VDC

◆ Input ﬁlter to meet EN 55022, Class A and

FCC, level A without external components

◆ Industry standard footprint

◆ Shielded metal case with insulated

baseplate

◆ 3-year product warranty

DC/DC Converters

TEN 15 Series, 15 Watt

The TEN 15 series is a family of high performance 15W DC/DC converters in a

compact 2” x 1” low proﬁle package with industry standard footprint. A high efﬁci-

ency allows a wide operating temperature range of –40°C to +85°C. A built-in EMI

ﬁlter is built in to meet EN 55022, class A without any external components.

Further standard features include over voltage protection and short-circuit protec-

tion. Typical applications for these converters are battery operated equipment, in-

strumentation, distributed power architectures in communication and industrial elec-

tronics, everywhere where isolated, tightly regulated voltages are required.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 15-1210 3.3 VDC 4’000 mA 79 %

TEN 15-1211 5 VDC 3‘000 mA 82 %

TEN 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 %

TEN 15-1213 (12 VDC nominal) 15 VDC 1‘000 mA 86 %

TEN 15-1221 ±5 VDC ±1500 mA 83 %

TEN 15-1222 ±12 VDC ±625 mA 86 %

TEN 15-1223 ±15 VDC ±500 mA 84 %

TEN 15-2410 3.3 VDC 4’000 mA 80 %

TEN 15-2411 5 VDC 3‘000 mA 84 %

TEN 15-2412 18 – 36 VDC 12 VDC 1‘250 mA 85 %

TEN 15-2413 (24 VDC nominal) 15 VDC 1‘000 mA 85 %

TEN 15-2421 ±5 VDC ±1’500 mA 84 %

TEN 15-2422 ±12 VDC ±625 mA 86 %

TEN 15-2423 ±15 VDC ±500 mA 86 %

TEN 15-4810 3.3 VDC 4‘000 mA 81 %

TEN 15-4811 5 VDC 3‘000 mA 83 %

TEN 15-4812 36 – 75 VDC 12 VDC 1‘250 mA 87 %

TEN 15-4813 (48 VDC nomial) 15 VDC 1‘000 mA 86 %

TEN 15-4821 ±5 VDC ±1‘500 mA 85 %

TEN 15-4822 ±12 VDC ±625 mA 88 %

TEN 15-4823 ±15 VDC ±500 mA 87 %

Models

not recommended for new design in

http://www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current at no load 12 Vin models: 30 mA typ.

24 Vin models: 20 mA typ.

48 Vin models: 15 mA typ.

Input current at full load 12 Vin; 3.3 VDC models: 1470 mA typ.

12 Vin; other models: 1550 mA typ.

24 Vin; 3.3 VDC models: 730 mA typ.

24 Vin; other models: 780 mA typ.

48 Vin; 3.3 VDC models: 360 mA typ.

48 Vin; other models: 380 mA typ.

Surge voltage 12 Vin models: 36 V max.

(100 msec. max.) 24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

Voltage set accuracy ±1 %

Regulation – Input variation Vin min. to Vin max. 0.5 % max.

– Load variation 2 % – 100 % single output models: 0.5 % max.

dual output models: 1 % max. (balanced load)

5 % max. (load cross variation 25 % / 100 %)

Minimum load 2 % of rated max. output current.

(Operation at lower load is safe but major

deviations to specifyed data may occur)

Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max.

dual output models: 75 mVpk-pk max.

Temperature coefficient ±0.02 %/K

Start up time (nominal Vin and constant resistive load) 20 ms typ.

Transient response (25 % load step change) 250 µs typ.

Short circuit protection continiuous (automatic recovery)

Over load protection 150 % of Iout max typ. foldback

Over voltage protection 3.3 VDC models: 3.9 V

5.0 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 18 V

Capacitive load 3.3 VDC models: 10‘200 µF max.

5 VDC models: 7‘050 µF max.

12 VDC models: 1‘035 µF max.

15 VDC models: 750 µF max.

±5 VDC models: ±1‘020 µF max.

±12 VDC models: ±495 µF max.

±15 VDC models: ±165 µF max.

DC/DC Converters

TEN 15 Series 15 Watt

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications

Temperature ranges – Operating – 40°C to +85°C

– Casing temperature +100°C max.

– Storage –55°C to +105°C

Derating 3.3 / 5.0 VDC models: 2.5 %/K above 60°C

other models: 3.3 %/K above 70°C

Thermal impedance – Natural convection 12°C/W

– Natural convection with heatsink 10°C/W

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.3 Mio h

Isolation Test Voltage (Input/Output, 60s) 1‘600 VDC

Insulation System Functional

Isolation Capacitance (Input/Output) 300 pF max.

Isolation Resistance (Input/Output) >1 G Ohm

Switching frequency single output models: 500 kHz typ. (pulse width modulation)

dual output models: 300 kHz typ. (pulse width modulation)

EMC immunity – Electrostatic discharge ESD EN 61000-4-2 8 kV / 6 kV, criteria B

– RF field susceptibility EN 61000-4-3 10 V/m, criteria A

– Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B

– Surge immunity EN 61000-4-5 ±1 kV, criteria B

– Immunity to conducted RF disturbances EN 61000-4-6 10 Vrms, criteria A

Vibration acc. MIL-STD-810F

Thermal shock acc. MIL-STD-810F

Safety standards UL 60950-1, EN 60950-1, IEC 60950-1

Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material copper, nickel plated

Baseplate material non conductive FR4

Potting material epoxy (UL 94V-0 rated)

Weight 27 g ( 09.5oz)

Soldering temperature max. +265°C / 10 sec.

DC/DC Converters

TEN 15 Series 15 Watt

Supporting documents : www.tracopower.com/overview/ten15

Page 4 of 4

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

TEN 15 Series 15 Watt

Outline Dimensions

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3+Vout +Vout

4No pin Common

5–Vout –Vout

Pin-Out

Rev. July 11, 2018

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.05 (0.02 ±0.002)

Pin pitch tolerances: ±0.25 (±0.01)

Casing tolerances: ±0.5 (±0.02)

5.08

10.16

25.4

10.2

6.0

50.8

15.2 20.32

Insulated baseplate

(2.0)

(0.8)

(0.6)

(0.2)

(0.4)

(1.0)

2.5

(0.1)

(0.4)

(0.24)

Bottom View

10.16

10.2

(0.4)

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be supplied

with heat-sinks already mounted. Please con-

tact factory for quotation.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 17g (0.60oz) without converter

Thermal impedance after assembling: 10 K/W

56.0 (2.2) max.

14.5 (0.57)

16.8 (0.66)

max.

Converter

Heat-sink

Thermal pad

Clamp

Heat-Sink (Option)