2014/2015 ALUMINUM ELECTROLYTIC CAPACITORS ELECTRONIC COMPONENTS & DEVICES PRODUCTS CAT.No. Aluminum Electrolytic Capacitors 1001 Multilayer Ceramic Capacitors 1002 Film Capacitors 1003 Metal Oxide Varistors TNRTM 1006 Amorphous / Dust Choke Coils 1008 Electric Double Layer Capacitors 1009 CAT.NO.E1001O Electro-Mechanical Products Notes on Safety [ English ] Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. The electronic components described in this catalogue were designed and developed for use in general electronic equipment, such as ; general household appliances, office and AV equipment, information and communication equipment, etc. We ask you, therefore, to appraise, examine and judge the suitability of these electronic components very carefully, or contact us, for designs that require higher levels of safety and reliability, such as ; medical or aerospace equipment, equipment related to nuclear power, safety devices for automotive products, or disaster prevention equipment. When using these components for circuits in general electronic equipment that also require higher levels or safety and reliability, we recommend that you carry out a thorough appraisal of the component's intended use in the application and add any necessary protection networks during the design phase. NIPPON CHEMI-CON CORPORATION Distributed or Represented by '14.07 NIPPON CHEMI-CON http://www.chemi-con.co.jp/e/ ELECTRONIC COMPONENTS & DEVICES 2014/2015 English CAT.NO.E1001O ALUMINUM ELECTROLYTIC CAPACITORS Aluminum Electrolytic Capacitors Product Guide P2~17 Group Chart Series Table Part Numbering System Environmental Consideration Taping Specifications Cut / Formed Lead Type Minimum Order Quantity Available Terminals For Snap-in And Screw-Mount Type Standardization World-Wide Manufacturing Locations Conductive Polymer Aluminum Solid Capacitors Precautions and Guidelines (Conductive Polymer) Part Numbering System (Conductive Polymer) Chip Type Radial Lead Type Recommended Reflow Soldering Conditions (Conductive Polymer) P2~4 P5~7 P8 P9 P10~12 P13 P14 P15 P16 P17 P19~58 P20~23 P24 P28~43 P44~57 P58 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors P59~70 Precautions and Guidelines (Conductive Polymer Hybrid) P61~64 Part Numbering System (Conductive Polymer Hybrid) P65 Chip Type P66~69 Recommended Reflow Soldering Conditions (Conductive Polymer Hybrid Chip Type) P70 Aluminum Electrolytic Capacitors P71~353 Precautions and Guidelines (Aluminum Electrolytic Capacitors) P72~75 Recommended Soldering Conditions P76 (Aluminum Electrolytic Capacitor) P77~120 Chip Type P121~222 Radial Lead Type P223~283 Snap-in Type P285~353 Screw Terminal Type Technical Note P354~367 Reliability Test Data P368~375 Appendix P376~380 1 GROUP CHART : Recommendation products CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS SURFACE MOUNT TYPE RADIAL LEAD TYPE Surface Mount Type PXF PXS Low ESR PXH PXK PSA 1251,000H 10515,000H P42 Downsizing P36 PSE Long Life P48 10515,000H P38 PSF Digitalization Super Low ESR Low ESR,Long Life P32 PXE 1053,000/15,000H Radial Lead Type 125 High Temperature Long Life P34 PXA Digitalization Super Low ESR PXD PXG PS 1252,000H P40 10516 to 25V PSC 10515,000H P46 PSG 10515,000H 10516 to 25V P56 P28 PSK Downsizing,Long Life P52 P54 P30 P50 P44 CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROTIC CAPACITORS SURFACE MOUNT TYPE Surface Mount Type Digitalization Super Low ESR 125 High Temperature HXB HXA 1055,000H 1254,000H P68 P66 ALUMINUM ELECTROLYTIC CAPACITORS SURFACE MOUNT TYPE Digitalization 105 High Voltage 105 Low Impedance MKB MVY 400V 1051,0005,000H P118 P90 MZA Low Z 1052,000/5,000H Low Z P88 MZJ 1052,000H P86 Downsizing MZR 1052,000H P84 105 Low Impedance / Long Life MLA Surface Mount Standard MVA 85 P80 1053,000H MVE P98 105 MZE MZF P94 P92 Long Life 1057,000/8,000H Long Life 10510,000H MZK P82 1055,000H Low Profile P96 125 High Temperature MVH 125 P108 MHL Downsizing 125 Automotive Application 105 Long Life MVL MLE MLF P102 P100 1053,000/5,000H Long Life 1057,000/8,000H Long Life 10510,000H Long Life P110 P105 125 Low ESR Low ESR 125 Low ESR Low ESR 125 Low ESR MHB MHJ MHK 1052,000H 1055,000H Low Profile P112 P114 P116 P107 P104 MVJ 2 MLK CAT. No. E1001O GROUP CHART : Recommendation products ALUMINUM ELECTROLYTIC CAPACITORS RADIAL LEAD TYPE Low Profile Power Supply Output Filter 105 Low Impedance / High Ripple6.3 to 100V KZE KZH Low Z Low Z P157 P123/124 KY KRE 855mmL Low Profile P125 Low Profile KRG/KMA SRG/SRA Long Life, Low Z 1055mmL 857 to 20mmL 1057 to 20mmL P128/126 P130/127 Long Life Long Life, Low Z P155 Low Profile 5 to 20mm height SRM/SRE KZM Downsizing KYA P160 LXV LXY LXZ High Reliability Low Z High Reliability Low Z P176 P132 Downsizing P135 KMG P138 P142 85 P187 P185 KXG 1058,000/10,000H Downsizing KXJ 1058,000 to 12,000H P179 Automotive Application 125/135 High Temperature GPA For Airbag High vibration resistance GPD High Ripple P213 125 Long Life GXL GXH P206 P208 P215 1055,000H 1352,000 to 3,000H P210 125 LBK GVD 135 High Ripple P201 GXE Power Supply Input Filter KHE P183 P169 1055,000H 105 125 High Ripple High Reliability KWA Downsizing SMG Downsizing 1052,000H P189 105 85 Downsizing LZA P171 P174 PAG KMQ SMQ P149 KYB 105 High Ripple / Long Life160V and more KZN Long Life, Low Z Long Life, Low Z Low Z Long Life, Low Z P163 1052,000H High Ripple P152 P166 Radial Lead Standard P217 High Ripple LBG GVA 135 Downsizing 1055,000H 1255,000H P219 P204 LED Lighting Compact Charger For Photo Flash PH P221 Downsizing160 to 400V KXE 10510,000/12,000H P195 Long Life LE 10510,000H P197 Long Life FL No Sparks against Over-Voltage KLJ 1052,000H P191 Downsizing KLG 1053,000H 1052,000H P199 P193 3 CAT. No. E1001O GROUP CHART : Recommendation products ALUMINUM ELECTROLYTIC CAPACITORS SNAP-IN TYPE 105 Long Life Long Life LXM KMS 1057,000H 1053,000H P247 Snap-in Standard SMQ KMQ 852,000H 1052,000H P227 P235 SMH SMM P265 Downsizing LXG KMM 1056.3 to 100V P255 P258 10510 to 100V 1055,000H P241 P250 P274 P271 KMT Super Downsizing 1053,000H KMW P245 1052,000H Low Profile15mm height SLM 85 KLM P261 P230 SMR Charge and Discharge application Downsizing KMR 105 852,000H 1052,000H P262 P225 P232 KMV P263 LXQ 1052,000/3,000H High Ripple 10510,000H Long Life 853,000H KMH 856.3 to 100V TXH Long Life LXS Downsizing 1055,000H P268 No Sparks against Over-Voltage CHA Inverter control application RLA 1052,000H 852,000H P277 P239 Downsizing LXH 1053,000H 1053,000/5,000H P281 P279 SCREW-MOUNT TYPE 85 High Ripple5,000/20,000H RWF 855,000H RWG Downsizing 855,000H P300 RWH High Ripple 855,000H P296 P314 RWL Low Cost 8520,000H P308 P310 Screw-Mount Standard KMQ SME 85 High Ripple2,000H Downsizing KMH Compact Size High ripple For Inverter 1052,000H P290 FTP 855,000H P298 RWY Oval shape85 852,000H 1052,000H 350 to 550V P288 P292 P306 Downsizing 350 to 550V P304 105 High Ripple LXA 1052,000/5,000H RWR RWQ RWE LXR High Ripple 1055,000H P316 P320 High Ripple High Voltage 500 to 650V RHA High Ripple 500 to 650V P302 P312 For Inverter Charge and Discharge application RWV 855,000H P322 UNITED CHEMI-CON, INC. Products U37F U37L U37X P333 P340 855,000H Long Life 8510,000H Long Life 8515,000H P326 Toroidal Shape UTOR 1055,000H P347 4 CAT. No. E1001O Return Group Chart CAPACITOR SERIES TABLE, CONTENTS Long life High reliability Endurance (+R=With ripple) Rated voltage range (Vdc) Super low ESR, high ripple current, downsized SMD 105 3,000 to 15,000 hours 16 to 25 30 Super low ESR, high ripple current, downsized SMD 105 3,000 to 15,000 hours 2.5 to 16 32 Long life, super low ESR, high ripple current SMD 105 20,000 hours 34 Super low ESR, high ripple current SMD 105 3,000 to 15,000 hours PXE 36 Super low ESR, high ripple current SMD 105 15,000 hours 2.5 to 16 PXA 38 Super low ESR, high ripple current SMD 105 3,000 to 15,000 hours 2.5 to 25 PXD 40 125, super low ESR, high ripple current SMD 125 2,000 hours 2.5 to 10 PXH 42 125, super low ESR, high ripple current SMD 125 1,000 hours 2.5 to 20 44 Long life, super low ESR, high ripple current Radial 105 15,000 to 20,000 hours 16 to 25 PSK 46 Long life, super low ESR, high ripple current Radial 105 20,000 hours 2.5 to 6.3 PSF 48 Long life, super low ESR, high ripple current Radial 105 20,000 hours 2 to 16 PSE 50 Long life, super low ESR, high ripple current Radial 105 20,000 hours 2.5 to 6.3 PSC 52 Super low ESR, high ripple current Radial 105 15,000 hours 2.5 to 16 PSA 54 Super low ESR, high ripple current Radial 105 15,000 hours 2.5 to 16 PS 56 Super low ESR, high ripple current Radial 105 15,000 hours 2.5 to 35 Upgrade! PXS PXF PSG Radial Lead Type Terminal type 28 PXG PXK Surface Mount Type Features Low impedance Page Miniaturization Low profile type Series Standard Type CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Upgrade! Upgrade! 4 to 16 2 to 10 Surface Mount Type Long life High reliability Features Low impedance Page Miniaturization Low profile type Series Standard Type CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Terminal type Endurance (+R=With ripple) Rated voltage range (Vdc) HXA New! 66 125, super low ESR, high ripple current SMD 125 4,000 hours +R 16 to 63 HXB New! 68 Super low ESR, high ripple current SMD 105 5,000 hours +R 16 to 63 General Purpose Surface Mount Type Long Life Special Application Long life High reliability Low impedance Features Terminal type Endurance (+R=With ripple) Rated voltage range (Vdc) MVA 80 85,standard SMD 85 2,000 hours MVE 82 105, standard SMD 105 1,000 to 2,000 hours 6.3 to 450 6.3 to 35 MZR Low Impedance Page Miniaturization Low profile type Series Standard Type ALUMINUM ELECTROLYTIC CAPACITORS 4 to 450 84 Super low ESR, downsized SMD 105 2,000 hours MZJ 86 Super low ESR SMD 105 2,000 hours 6.3 to 35 MZA 88 Super low impedance SMD 105 2,000 to 5,000 hours 6.3 to 100 MVY 90 Low impedance, standard, Case size4 to 18mm SMD 105 1,000 to 5,000 hours 6.3 to 100 MZF 92 10,000 hours, Long life, low impedance SMD 105 10,000 hours 6.3 to 50 MZE 94 7,000/8,000 hours, Long life, low impedance SMD 105 7,000 to 8,000 hours 6.3 to 50 MZK 96 5,000 hours, Long life, low impedance SMD 105 5,000 hours 6.3 to 35 MLA 98 3,000 hours, Long life, low impedance SMD 105 3,000 hours 6.3 to 50 MLF 100 10,000 hours, Long life SMD 105 10,000 hours 6.3 to 50 MLE 102 7,000/8,000 hours, Long life SMD 105 7,000 to 8,000 hours 6.3 to 50 MLK 104 5,000 hours, Long life SMD 105 5,000 hours 6.3 to 35 MVL 105 3,000/5,000 hours, Long life SMD 105 3,000 to 5,000 hours 6.3 to 50 MVJ 107 2,000 hours, Long life SMD 105 2,000 hours 6.3 to 50 New! MVH 108 125, Case size6.3 to 18mm SMD 125 1,000 to 5,000 hours 10 to 450 MHL 110 125, Downsized SMD 125 2,000 to 4,000 hours 10 to 35 MHB 112 125, Specified ESR after endurance SMD 125 1,500 to 3,000 hours 10 to 100 MHJ 114 125, Specified ESR after endurance SMD 125 2,000 to 3,000 hours 10 to 35 116 125, Specified ESR after endurance SMD 125 2,000 hours 35 MKB 118 Specified ESR at low temperature SMD 105 3,000 hours 400 MV-BP 119 Bi-polar SMD 85 2,000 hours 6.3 to 50 MVK-BP 120 Bi-polar SMD 105 1,000 hours 6.3 to 50 MHK New! : Recommendation products Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 5 CAT. No. E1001O Return Group Chart CAPACITOR SERIES TABLE, CONTENTS Low Profile General Purpose Radial Lead Type High Frequency Use Long life High reliability Low impedance Rated voltage range (Vdc) 123 85, 5mm height, downsized Radial 85 1,000 hours 124 85, 5mm height, standard Radial 85 1,000 hours 4 to 50 KRE 125 105, 5mm height, standard Radial 105 1,000 hours 6.3 to 50 SRA 126 85, 7mm height, standard Radial 85 1,000 hours 4 to 63 KMA 127 105, 7mm height, standard Radial 105 1,000 hours 4 to 63 SRG 128 4x7 to 18x25mm, low profile Radial 85 1,000 to 2,000 hours KRG 130 4x7 to 18x25mm, low profile Radial 105 1,000 hours 6.3 to 50 4 to 50 4 to 50 SMQ 132 85, Downsized Radial 85 2,000 hours 6.3 to 450 KMQ 135 105, Downsized Radial 105 1,000 to 2,000 hours +R 6.3 to 450 SMG 138 85, standard Radial 85 2,000 hours 6.3 to 450 KMG 142 105, standard Radial 105 1,000 to 2,000 hours +R 6.3 to 450 SME-BP 145 Bi-polar, downsized Radial 85 2,000 hours 6.3 to 100 KME-BP 147 Bi-polar, downsized Radial 105 1,000 hours 6.3 to 100 KZN 149 Long life, low impedance Radial 105 6,000 to 10,000 hours +R 6.3 to 100 KZM 152 Long life, super low impedance Radial 105 6,000 to 10,000 hours +R 6.3 to 50 KZH 155 Super low impedance, downsized Radial 105 5,000 to 6,000 hours +R 6.3 to 35 KZE 157 Low impedance, downsized Radial 105 1,000 to 5,000 hours +R 6.3 to 100 KYB 160 Low impedance, downsized Radial 105 4,000 to 10,000 hours +R 6.3 to 100 KYA 163 Low impedance, downsized Radial 105 4,000 to 10,000 hours +R 6.3 to 100 KY 166 Low impedance, standard Radial 105 4,000 to 10,000 hours +R 6.3 to 100 LZA 169 Low impedance, downsized Radial 105 4,000 to 7,000 hours +R 6.3 to 35 LXZ 171 Low impedance, downsized Radial 105 2,000 to 8,000 hours +R 6.3 to 63 LXY 174 Low impedance Radial 105 2,000 to 8,000 hours +R 10 to 63 LXV 176 Low impedance Radial 105 2,000 to 5,000 hours +R 6.3 to 100 KXJ 179 Long life, downsized, for input filtering Radial 105 8,000 to 12,000 hours +R 160 to 500 KXG 183 Long life, downsized, for input filtering Radial 105 8,000 to 10,000 hours +R 160 to 450 185 Low profile, long life for input filtering Radial 105 5,000 hours +R 400 to 450 KHE 187 Low profile, high ripple for input filtering Radial 105 2,000 hours +R 400 to 450 PAG 189 Low profile, for input filtering Radial 105 2,000 hours +R 200 to 450 SMH - For input filtering,20x20 to22x50mm Radial 85 2,000 hours +R 160 to 450 KMH - For input filtering,20x20 to22x50mm (Ask Engineering Bulletin No.810 in detail) Radial 105 2,000 hours +R 160 to 450 KLJ 191 No sparks with DC overvoltage, downsized Radial 105 2,000 hours +R 200 to 450 KLG 193 No sparks with DC overvoltage Radial 105 2,000 hours +R 200 & 400 195 Long life, downsized, for input filtering Radial 105 10,000 to 12,000 hours +R 160 to 400 LE 197 Long life, downsized Radial 105 10,000 hours +R 10 to 100 FL 199 Long life, downsized Radial 105 3,000 hours +R 6.3 to 50 New! Upgrade! (Ask Engineering Bulletin No.808 in detail) GPA Upgrade! 201 125/150, downsized (Guaranteed short time at 150) Radial 125 3,000 to 5,000 hours +R 25 to 100 GVA New! 204 125, high vibration resistance Radial 125 5,000 hours 25 to 100 GXE 206 125, low impedance, downsized Radial 125 2,000 to 5,000 hours +R 10 to 450 GXL 208 125 Radial 125 5,000 hours +R 10 to 50 GPD 210 135/150, high ripple (Guaranteed short time at 150) Radial 135 2,000 to 3,000 hours +R 25 to 100 213 135, high vibration resistance Radial 135 2,000 to 3,000 hours 25 to 100 215 135 Radial 135 1,500 / 2,000 hours +R 10 to 50 217 For airbag, downsized Radial 105 5,000 hours +R 25 & 35 LBG 219 For airbag Radial 105 5,000 hours +R 25 & 35 KZA - For PC motherboard Radial 105 2,000 hours +R 6.3 to 16 LLA - Low leakage current (Ask Engineering Bulletin No.575 in detail) Radial 85 1,000 hours For photo flash Radial 55 5,000 times charging GVD New! GXH LBK Special Application Endurance (+R=With ripple) SRM KXE High Reliability Terminal type SRE KWA Power Supply Input Filter Features Miniaturization Low profile type Page Series Standard Type ALUMINUM ELECTROLYTIC CAPACITORS New! PH 221 (Ask Engineering Bulletin No.809 in detail) 6.3 to 50 300 & 330 : Recommendation products Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 6 CAT. No. E1001O Return Group Chart CAPACITOR SERIES TABLE, CONTENTS Snap-in Type General Purpose Low Profile High Reliability Screw-Mount Type General Purpose Long life High reliability High ripple Features Miniaturization Low profile type Page Series Standard Type ALUMINUM ELECTROLYTIC CAPACITORS Terminal type Endurance (+R=With ripple) Rated voltage range (Vdc) SMR SMQ KMW KMR KMQ RLA New! SMM KMT KMS KMM 225 227 230 232 235 239 241 245 247 250 85, high ripple, downsized 85, standard 105, super downsized 105, downsized 105, standard 85, high ripple 85, 3,000 hours 105, high ripple 105, downsized 105, 2,000/3,000 hours Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin 400 to 450 85 2,000 hours +R 160 to 450 85 2,000 hours +R 400 to 450 105 2,000 hours +R 160 to 450 105 2,000 hours +R 35, 50, 160 to 450 105 2,000 hours +R 180 to 250 85 2,000 hours +R 160 to 450 85 3,000 hours +R 420 & 450 105 3,000 hours +R 160 to 500 105 3,000 hours +R 160 to 450 105 2,000 to 3,000 hours +R SMH 255 85, standard Pin 85 2,000 hours +R KMH 258 105, standard (Ask Engineering Bulletin No.584 for 160 to 450V) Pin 105 2,000 hours +R 6.3 to 100 SLM KLM TXH LXM LXS LXQ LXG CHA LXH KMV 261 262 263 265 268 271 274 277 279 281 15mm height, low profile 15mm height, low profile Long life Long life, downsized Long life, downsized Long life, downsized Long life No sparks with DC overvoltage, downsized No sparks with DC overvoltage For charge and discharge application Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin 85 2,000 hours +R 105 2,000 hours +R 105 10,000 hours +R 105 7,000 hours +R 105 5,000 hours +R 105 5,000 hours +R 105 5,000 hours +R 105 2,000 hours +R 105 3,000/5,000 hours +R 105 3,000 hours +R 160 to 400 160 to 400 200 to 450 160 to 450 160 to 500 160 to 450 10 to 100 200 to 450 200 & 400 350 to 450 288 85, standard (Ask Engineering Bulletin No.548 for 160 to 250V) Screw 85 2,000 hours +R 10 to 100 290 292 296 298 300 302 304 306 308 310 105, downsized 105, standard High ripple, downsized Long life, high ripple, downsized Long life, high ripple High ripple, downsized High ripple, downsized High ripple Long life, high ripple, low cost Long life, high ripple Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw 105 2,000 hours +R 105 2,000 hours +R 85 5,000 hours +R 85 5,000 hours +R 85 5,000 hours +R 85 2,000 hours +R 85 2,000 hours +R 85 2,000 hours +R 85 5,000 hours +R 85 20,000 hours +R 315 to 450 10 to 400 350 to 450 350 to 450 350 to 450 350 to 450 350 to 550 350 to 550 350 to 450 350 to 450 85, high voltage (Ask Engineering Bulleten No.846 in detail) Screw 85 2,000 hours +R 575 to 700 High voltage, high ripple Ovalized can shape, high ripple 105, long life 105, long life, high ripple For charge and discharge application Screw Screw Screw Screw Screw 85 5,000 hours +R 85 5,000 hours +R 105 2,000/5,000 hours +R 105 5,000 hours +R 85 5,000 hours +R 500 to 650 63 to 450 10 to 525 350 to 450 350 to 450 Upgrade! SME KMQ KMH RWH RWG RWF RWR RWQ RWE RWY For Inverter RWL RHB - New! RHA FTP LXA LXR RWV 312 314 316 320 322 (Ask Engineering Bulletin No.585 for 160 to 450V) 6.3 to 100 Screw-Mount Type U37F New! U37L New! For Inverter U37X New! UTOR New! 326 333 340 347 Long life, high ripple Long life, high ripple Long life, high ripple Toroidal shape, long life, high ripple Long life High reliability Features High ripple Page Miniaturization Low profile type Series Standard Type ALUMINUM ELECTROLYTIC CAPACITORS (UNITED CHEMI-CON, INC. Products) Terminal type Screw Screw Screw Screw Endurance (+R=With ripple) 85 5,000 hours +R 85 10,000 hours +R 85 15,000 hours +R 105 5,000 hours +R Rated voltage range (Vdc) 350 to 500 350 to 500 350 to 500 350 to 500 : Recommendation products Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 7 CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Part numbering system Our part numbering system is common to all of Nippon Chemi-Con's subsidiaries worldwide, and has been switching the conventional part numbering system. The part number uses 18-digit codes to express information of principal product specifications such as product category, series name, rated voltage, capacitance, case size and RoHS compliance. Categories 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S P T - 0 1 B R 0 5 K M 3 N 0 T 0 0 Code Details A H E Conductive Polymer Aluminum Solid Capacitors (Polar) Conductive Polymer Hybrid Aluminum Electrolytic Capacitors (Polar) Aluminum Electrolytic Capacitors (Polar) B K F Aluminum Electrolytic Capacitors (Bi-polar) Multilayer Ceramic Capacitors Film Capacitors D T Electric Double Layer Capacitors Metal Oxide Varistors L Amorphous Choke Coils * For digits 2 to 18, please see "Product code guide". Example Product type Part number (Example) Conventional part number (Ref.) Surface mount type EMVE160ADA100MD55G MVE16VC10MD55E0 Radial lead type EKMQ6R3ETC102MHB5D TC04RKMQ6. 3VB1000MF50E0 Snap-in type EKMQ201VSN471MP30S KMQ200VSSN470M22BE0 Screw mount terminal type ERWE551LGC821MCD0M RWE550LGSN820MCC13EA Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 8 CAT. No. E1001O Return Group Chart ENVIRONMENTAL CONSIDERATION Environment friendly capacitors Nippon Chemi-Con always considers the environment in product materials, designs and manufacturing. In fact, our factories already have received ISO 14000 certificate. Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE have never been used in our products. Furthermore, lead-containing materials have been eliminated from all our aluminum electrolytic capacitors including Conductive Polymer Aluminum Solid Capacitors to comply with RoHS. If you need "Halogen-Free" products, please consult with us. Lead free and Non-PVC Products 1. Lead wire (Plating) Category Chip Radial Plating material on lead wires case code : D46 to JA0 Sn-Bi case code : KE0 to MN0 Sn case dia : 8 Sn-Bi case dia :10 Sn Snap-in Sn Screw-Mount Originally lead-free *Please consult with us when you need "Lead-free parts" other than the above mentioned terminal plating materials. (Note) Sn : Tin, Bi : Bismuth 2. Sleeve Category Chip Radial Sleeve material Sleeveless(Coating case) 8x5L Sleeveless(Coating case) except 8x5L PET Snap-in PET Screw-Mount PVC(Lead-free) *Please consult with us when you need "Non-PVC parts" other than the above mentioned outer sleeve materials. The colors of a PET sleeve are "Black", "Brown", and "Dark blue". Standard designs of "lead-free" Snap-in type are not equipped with a plastic disc. Please consult with us when you need nonflammable grade for outer sleeve material. Identification of friendly parts is given by a supplement code (18th digit) of the part number. For details, please refer to "Product code guide" for each type. Regarding compliance for EU REACH Regulation 1) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are "articles without any intended release". Therefore they are not applicable for "Registration" for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society "Study of REACH Regulation in EU about Electrolytic Capacitor" (publicized on 13 March 2008) 2) Nippon Chemi-Con develops the products without substance of very high concern(SVHC).DEHP(CASNo.117-81-7) was contained as some covering material, Nippon Chemi-Con abolished use of DEHP totally at June, 2011. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 9 CAT. No. E1001O Return Group Chart PACKAGING TAPING SPECIFICATIONS SURFACE MOUNT TYPE (TAPING) CARRIER TAPE [mm] 1.5 +-00.1 40.1 20.1 1.750.1 20.05 0.1 1.5 + -0 0.6max. 0.6max. B B A A P P Fig.4 40.1 0.6max. 1.5 +0.1 -0 20.1 0.6max. B S B B W F W F 20.1 40.1 (If W=12, 20.05) 1.5 +-00.1 1.750.1 Fig.2 t Feed direction t Feed direction 1.75 0.1 W F W F 40.1 Fig.3 1.750.1 Fig.1 P A t Feed direction P Feeding hole 0. 75 0. 05 Feed direction t 0.20.05 A Feeding hole [mm] Series AlchipTM MVA/MVE MZR/MZJ MZA/MVY MZF/MZE MZK/MLA MLF/MLE MLK/MVL MVJ/MVH MHL/MHB MHJ/MHK MKB MV-BP MVK-BP NPCAPTM PXG/PXK PXS/PXF PXE/PXA PXD/PXH Hybrid HXA/HXB Items D55 D60,D61 D73 E40 E46 E55 E60,E61 E73 F45,F46 F55 F60,F61 F73 F80 F90 H63 H70 H80 HA0 HC0 J80 JA0 JC0 KE0 KG5 LH0 LN0 MH0 MN0 W A B F P t S 0.3 0.2 0.2 0.1 0.1 0.2 0.1 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 32.0 32.0 44.0 44.0 44.0 44.0 4.7 4.7 4.6 5.7 5.7 5.7 5.7 5.7 7.0 7.0 7.0 7.0 7.0 7.0 8.7 8.7 8.7 8.7 8.7 10.7 10.7 10.7 13.4 13.4 17.5 17.5 19.5 19.5 4.7 4.7 4.6 5.7 5.7 5.7 5.7 5.7 7.0 7.0 7.0 7.0 7.0 7.0 8.7 8.7 8.7 8.7 8.7 10.7 10.7 10.7 13.4 13.4 17.5 17.5 19.5 19.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2 20.2 8.0 8.0 8.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 28.0 28.0 32.0 32.0 5.7 6.3 7.5 4.4 4.9 5.7 6.3 7.5 4.9 5.7 6.3 7.5 8.2 9.2 6.8 7.3 8.3 11.0 12.7 8.3 11.0 12.8 14.0 16.5 16.8 22.1 17.1 22.1 28.4 28.4 40.4 40.4 40.4 40.4 Fig. 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 4 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 10 CAT. No. E1001O Return Group Chart PACKAGING QUANTITY PER REEL/BOX REEL DIMENSIONS [mm] Series 50min. AlchipTM MVA/MVE MZR/MZJ MZA/MVY MZF/MZE MZK/MLA MLF/MLE MLK/MVL MVJ/MVH MHL/MHB MHJ/MHK MKB/MV-BP MVK-BP 130.5 W1 382max. Hybrid HXA/HXB POLARITY AlchipTM -MVA/MVE/MZR Feed Direction MZJ/MZA/MVY MZF/MZE/MZK MLA/MLF/MLE MLK/MVL/MVJ MVH/MHL/MHB MHJ/MHK/MKB MV-BP/MVK-BP TM NP CAP -PXG/PXK/PXS PXF/PXE/PXA PXD/PXH Hybrid -HXA/HXB Quantity (pcs/reel) 2,000 1,500 1,000 1,000 1,000 900 800 1,000 500 500 200 150 125 75 125 75 2,000 1,000 1,000 900 1,000 900 500 400 500 500 400 Size code NPCAPTM PXG/PXK PXS/PXF PXE/PXA PXD/PXH D55,D60,D61 D73 E55,E60,E61 E73 F55,F60,F61,F73 F80 F90 H63 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 D55 E40,E46,E60,E61 F45,F46,F55,F60,F61 F80 H70 H80 HA0 HC0 J80 JA0 JC0 Quantity (pcs/box) 10,000 7,500 5,000 5,000 5,000 4,500 4,000 5,000 1,500 1,500 600 450 250 150 250 150 20,000 10,000 7,000 6,300 6,000 5,400 3,000 1,200 3,000 3,000 1,200 W1 (mm) 14 14 14 18 18 18 18 18 26 26 34 34 46 46 46 46 14 14 18 18 26 26 26 26 26 26 26 SURFACE MOUNT TYPE (TRAY) DIMENSIONS [mm] TRAY CODE : TR 230 320 W1 H H1 Size code H [mm] W1 [mm] H1 [mm] Quantity [pcs/tray] Quantity [pcs/box] KE0 & KG5 21.0 284 18.5 120 600 LH0 & LN0 28.0 284 24.0 80 400 MH0 & MN0 28.0 284 24.0 60 300 VIBRATION RESISTANT STRUCTURE (Terminal code : G) DIMENSIONS [mm] Terminal code : G Size code : HA0 to JA0 RECOMMENDED SOLDER LAND c W 0.3max. P C0.2 B0.2 D0.5 b a b (b) (a) A0.2 L0.5 Solder land on PC board : Dummy terminals B0.2 D0.5 0.3max. P C0.2 Size code : KE0 to MN0 Size code W (b) (a) L0.5 A0.2 : Dummy terminals HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 Solder land (mm) Dimensions of products (mm) D 8.0 10.0 12.5 12.5 16.0 16.0 18.0 18.0 L 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 A 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 (a) (0.5) (0.5) (1.3) (1.3) (2.0) (2.0) (2.0) (2.0) (b) (1.8) (2.1) (3.0) (3.0) (3.0) (3.0) (4.0) (4.0) a 3.1 4.5 3.4 3.4 4.7 4.7 4.7 4.7 b 4.2 4.4 6.3 6.3 7.8 7.8 8.8 8.8 c 3.5 3.5 9.3 9.3 9.6 9.6 9.6 9.6 ( ); Ref. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 11 CAT. No. E1001O Return Group Chart PACKAGING TAPING SPECIFICATIONS RADIAL LEAD TYPE (TAPING) DIMENSION [mm] 2.0 2.0 A D=5 DxL=4x7 1.0max. F P1 P0 Base tape Adhesive tape 1.0 max. W W W0 d 0.70.2 0.70.2 W2 W1 W0 H0 H d H1 A 1.0max. F P1 D Taping Code : TD H1 P0 Base tape 4.00.2 Adhesive tape 1.0 max. 4.00.2 2.0 W0 Code tol. P1 P2 F W W0 W1 W2 H H0 0.05 1.0 0.2 0.7 1.0 0.8 -0.2 0.5 min. 0.5 max. 0.75 0.5 5 0.45 12.7 12.7 6.35 6.0 9.0 1.5 17.5 16.0 0.45 12.7 12.7 18.0 6.0 9.0 1.5 18.5*1 17.5 16.0 2 1 11.5 0.45 12.7 12.7 2.5 5 2.5 5 2.5 5 18.0 7 5.1 3.85 5.1 3.85 5.1 3.85 18.0 10.0 9.0 1.5 17.5 16.0 1 5 to 7 0.45 12.7 12.7 5.1 3.85 5.1 3.85 6.35 2.5 5 2.5 5 18.0 6.0 9.0 1.5 18.5 17.5 16.0 18.0 10.0 9.0 1.5 18.5 16.0 18.0 6.0 9.0 1.5 18.5 17.5 16.0 TA TC 4 TC TD Nominal TC 5 TD TC TD TC 6.3 TD TC 9 to 15 0.5 12.7 12.7 5 to 7 0.45 12.7 12.7 0.5 12.7 12.7 6.35 18.0 10.0 9.0 1.5 18.5 16.0 5 0.45 12.7 12.7 5.1 3.85 6.35 2.5 5 18.0 6.0 9.0 1.5 18.5 17.5 16.0 Nominal 6.35 Fig 1 2 1 2 1 3 1 3 1 3 1 7 0.45 12.7 12.7 3.85 6.35 5 18.0 6.0 9.0 1.5 17.5 16.0 0.6 12.7 12.7 4.6 3.85 6.35 3.5 5 18.0 10.0 9.0 1.5 20.0 0.5 max. 0.05 1.0 0.3 0.7 1.3 0.8 -0.2 0.5 min. 0.5 max. 2.0 -0 10 21 0.6 12.7 12.7 3.85 6.35 5 18.0 12.5 9.0 1.5 18.0 3 0.6 15 15 5.0 7.5 5 18.0 12.5 9.0 1.5 18.0 3 0.6 25.4 12.7 3.85 6.35 5 18.0 12.5 9.0 1.5 18.0 4 12.5 TE H1 9 to 20 TC TD 6.35 9 to 15 8 TD TD 6.35 2.5 5 2.5 5 TC tol. 6.35 5.1 3.85 5.1 3.85 TD TC 0.70.2 P0 TD 4.00.2 P A TC 1.0 max. Adhesive tape Base tape d D TD P0 4.00.2 Adhesive tape Case size Taping Code W W 1.0 max. P0 Base tape W1 d F P1 W2 0.70.2 W2 1.0max. W1 W0 H D H1 1.0max. d F P D=12.5 H1 D=6.3 to 12.5 P1 P2 Taping Code : TE A Taping Code : TD 2.0 Fig.4 P D A P2 H Fig.3 H1=H+A Check insertion machine specs. D=4 to 8 P W2 D Taping Code : TA, TC P2 Fig.2 W1 P H P2 Fig.1 26 16.0 1 3 1 * 1 : For case size4x7 (Taping code : TD), H dimension shall be 18.5-0.5/+0.75. * 2 : The taping for size 16 and 18 is available as a custom design. TAPING CODE QUANTITY PER AMMO PACK Example 1 2 3 4 Ammo pack box 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ 5 0 0 E T C 1 0 0 M E 1 1 D Typical example Case size D L(mm) Line for tear-off Supplement code Size code Capacitance tolerance code Nominal capacitance code Lead forming code (Radial lead type) Code Contents Taping (Radial lead) Straight Grodual forming Straight(Skip a hole) Forming(F=2.5mm) Forming(F=5.0mm) 9th 10th T D T T T E A C A Type L=5 & 7mm L=11.5mm L=5 & 7mm 5 L=9 to 15mm L=17mm L=5 & 7mm 6.3 L=9 to 15mm L=17mm L=5 & 7mm 8 L=9 to 15mm L=17 & 20mm L=16mm L=17 to 20mm 10 L=21 to 25mm L=26 to 30mm L=16mm 12.5 L=17 to 25mm 4 B 328mm (D=8 and smaller) 340mm (D=10 and larger) Terminal code Rated voltage code Series code Category A B Quantity (mm) (mm) (pcs.) 183 183 232 232 235 282 284 284 232 232 235 308 308 308 308 308 308 42 51 42 51 60 42 51 55 42 51 60 56 62 67 71 62 67 2,000 2,000 2,000 1,000 800(500)* 800 800 500 500 500 *Minimum order quantity for PSG(11.5L max.)/ PSK/PSF/PSE/PSC/PSA/PS series Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 12 CAT. No. E1001O Return Group Chart PACKAGING RADIAL LEAD TYPE (CUT/FORMED LEAD) The following lead configurations are available. When ordering, please indicate the type of lead configurations by using the appropriate supplement code, such as C3, FC, MC or RC in the product part number. Terminal type code : FC (Forming Cut type) Lead Size code : C3 (Cutting type) D D P0.5 d d Lead Size D=5 to 8 50.5 P0.5 Terminal type D=4 to 18 C Dimension (C) D= 4 to 8: C3: 3.50.5(Second standard C5: 5.00.5) +1.0 ) D=10 to 18: C3: 3.50.5(Second standard C5: 5.0 -0 2max. Lead code : MC (Snap-in type) d D D=5 to 8 2max. (2.5) code : BC (Horizontal type) Lead code : RC (Snap-in type) 4.01.0 5 .5 10 P D=20 to 22 0. d=1.0 D=10 to 18 3.50.5 2.8 d D D 2.50.5 Dimension (P) 10, 12.5 : P=5.00.5 14.5, 16, 18 : P=7.50.5 1max. (1.1) 1max. 2max. Lead D=10 to 18 4.5+1.0 -0 (1.1) P0.5 D 4.5+1.0 -0 P0.5 code : FM (Snap-in type) d Lead Lead code : IJ (Forming Cut type) B D d P D=10 to 18 A Dimension D 10 to 12.5 14.5 to 18 AB 3.20.5 3.20.5 d 0.6 0.8 DIMENSION (P) P 5.00.5 7.50.5 Lead forming * Please consult with us about other terminal forming. [mm] Cutting type Snap-in type Size FC C3(C5) FM MC 4 1.5 5 5.0 2.0 5.0 6.3 5.0 2.5 5.0 5L 5.0 2.5 5.0 7L min. 5.0 3.5 5.0 10 5.0 5.0 12.5 5.0 5.0 14.5 7.5 7.5 16 7.5 7.5 18 7.5 7.5 8 * Please refer to dimensions of each series for lead-wire diameter (d). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 13 CAT. No. E1001O Return Group Chart PACKAGING MINIMUM ORDER QUANTITY Please order by minimum order quantity. SURFACE MOUNT Vertical Series TM Alchip MVA/MVE/MZR MZJ/MZA/MVY MZF/MZE/MZK MLA/MLF/MLE MLK/MVL/MVJ MVH/MHL/MHB MHJ/MHK/MKB MV-BP/MVK-BP NPCAPTM PXG/PXK/PXS PXF/PXE/PXA PXD/PXH Hybrid HXA/HXB Quantity (pcs) Size code D55, D60, D61 D73 E40, E46, E55, E60, E61, E73 F45, F46, F55, F60, F61, F73 F80, H80 F90 H63, H70 HA0 HC0 J80, JA0 JC0 KE0 KG5 LH0 LN0 MH0 MN0 Taping Tray (pcs/box) 2,000 1,500 1,000 1,000 900 800 1,000 500 400 500 400 200 150 125 75 125 75 600 600 400 400 300 300 RADIAL Size 4 5 6.3 8 10 Height25mm Height30mm 12.5 14.5 16 18 Quantity (pcs) Bagged*1 Taping 200 200 200 200 200 (100)*2 200 100 50 50 50 2,000 2,000 2,000 1,000 800 500 500 250 250 250 (500)*2 *1 Standard bagged quantity. *2 Minimum order quantity for PSG(11.5L max.)/PSK/PSF/PSE/PSC/PSA/PS series. SNAP-IN 200 pieces Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 14 CAT. No. E1001O Return Group Chart PACKAGING AVAILABLE TERMINALS FOR SNAP-IN AND SCREW-MOUNT TYPE We can make the following terminal type on custom design. There is a restriction for specification of product, please consult with us when the product is required. Please consult with us about terminal type other than those following listed. Snap-in type [mm] Terminal, Dummy code : VNN D=22 to35 D=30 to40 Terminal, Dummy code : LIN PC board pin-out PC board pin-out 2-2 5.81 Vent 4.2 D+1max. D+1max. 10 2-1.2x6 5 *1 4.51 Vent Terminal, Dummy code : VRD 14.2 *1 Terminal, Dummy code : VND D=35, 40 D=35, 40 PC board pin-out PC board pin-out *1 5.51 5.81 *1 4-2 B : Positive, A, C : Dummy B : Positive, A, C : Dummy Terminal, Dummy code : LIS D=20x30 to 50L, 22x30 to 50L Horizontal mounting Terminal, Dummy code : LCN D=50 Negative mark *1 11.0 4.0 +0.2 - 0.1 A : Dummy *1 Vent 26.8 PC board pin-out 2-2 D+1max. 3-1.5x6.5 A 15.5 D+1max. PC board pin-out Vent 60 C 22.5 A Vent 4-2 60 B D+1max. C A 22.5 D+1max. B Vent 60 60 1.50.1 31 8 81 *1 Negative terminal : Mesh marking *2 Use the dummy terminals for mechanical support only. The dummy terminals must not be connected to any circuit trace on PC board, be sure to electrically isolate from the negative and the positive terminals. Screw-mount type [mm] Stud mounting type D=63.5 to 89 Installation Recommendation plate thickness: 3.2mm 16.51 Plastic disk Vent Mounting screw M12, P=1.75 300.5 D+1.8max. Plastic nut Recommendation mounting hole: 310.5 191 1.21 161 382 Mounting screw and case are same potential as the cathode terminal. Please careful of isolation between chassis. Please consult with us about other size. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 15 CAT. No. E1001O Return Group Chart STANDARDIZATION The following series are discontinued. Please use the replacements in the table. CHIP TYPE REPLACEMENTS Discontinued series Replacements Page 85 standard MVA 80 105 standard MVE 82 MVZ Low impedance MZA 88 MLD Long life MLE 102 MZD Low impedance,Long life MZE 94 Replacements Page SMG 138 KMG 142 LXY 174 MV MVK MKA Characteristics LEAD TYPE REPLACEMENTS Discontinued series SM SME Characteristics 85 standard KM KMC KME 105 standard USM BSM SHA 95 L=7mm LXY/LXZ 174/171 SM-BP 85 bi-polar SME-BP 145 KM-BP 105 bi-polar KME-BP 147 SRC 85 low profile SRG 128 Low impedance KY/LXV 166/176 Low impedance Long life LXY 174 KMY LXA Long life GXD High heat resistance GHA 150 high heat resistance KMF(160 to 450Vdc) High ripple current KMX Long life KRL 105 low leakage current SXC LXE LXJ SXE KMF(6.3 to 100Vdc) LXF KY 166 KY/LXY 166/174 GXE 206 * KXG 183 * Replacements LXA/LXR Page 316/320 SCREW-MOUNT TERMINAL REPLACEMENTS Discontinued series LWY Characteristics 105 long life * Please contact us. Already been discontinued products are not listed in this catalog. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 16 CAT. No. E1001O Return Group Chart WORLD-WIDE MANUFACTURING LOCATIONS SAMYOUNG ELECTRONICS CO.,LTD. Korea QINGDAO SAMYOUNG ELECTRONICS CO.,LTD. China CHEMI-CON (WUXI) CO.,LTD. (China) Nippon Chemi-Con UNITED CHEMI-CON, INC. USA CHEMI-CON (MALAYSIA) SDN.BHD. Malaysia TAIWAN CHEMI-CON CORP. Taiwan P.T.INDONESIA CHEMI-CON Indonesia AVAILABLE ITEMS BY MANUFACTURING LOCATIONS (Production in Japan is excluded) Classification Series PXE PXF PSA PSC PSE PSF MVA/MVE SMD MVY MZA SRE Radial lead SRA/KMA Low profile SRG SMG/KMG Radial lead General purpose SMQ/KMQ SME-BP Radial lead Bi-polar KME-BP LXZ Radial lead LXV Low impedance, KY High ripple KYA current KYB KZE KZH KZM KZN KXG KXJ PAG GPA Radial lead High temperature GXE Long life LE SMQ/KMQ Snap-in KMR SMM/KMM KMS LXQ LXS KMH Screw-mount RWE terminal RWF RWY RWL LXA U37F/U37L/U37X UTOR SAMYOUNG QINGDAO SAMYOUNG CHEMI-CON P.T.INDONESIA TAIWAN ELECTRONICS ELECTRONICS WUXI CHEMI-CON CHEMI-CON (Korea) (China) (China) (Indonesia) (Taiwan) CHEMI-CON MALAYSIA (Malaysia) UNITED CHEMI-CON (USA) Conductive SMD Polymer Electrolyte Radial Type lead *1 Please be sure to contact us before ordering as our product range is continuously improved and the product you require may have been superseded. *2 Refer to our web site for factory address. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 17 CAT. No. E1001O Return Group Chart 18 Return Group Chart Conductive Polymer Aluminum Solid Capacitors 19 Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) The NPCAPTM is a Conductive Polymer Solid Aluminum Capacitor that uses highly conductive polymer electrolytic material. Please read the following in order to get the most out of your NPCAPTM capacitor. For Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer Hybrid). For Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Aluminum Electrolytic Capacitors). 1 Designing Device Circuits 1 ) Types of Circuits Where NPCAPTM Capacitors are Not to be Used 8 ) Charging and Discharging the Capacitor The leakage current in conductive polymer solid aluminum capacitors (hereafter called capacitors) may vary depending on thermal stresses during soldering. Avoid the use of capacitors in the following types of circuits: High-impedance circuits that are to sustain voltages. Coupling circuits Time constant circuits Because the capacitance varies depending on the environment the capacitors are used in, there is a possibility that the capacitor can affect a time constant circuit where sensitivity to variation in capacitance is required. Other circuits that are significantly affected by leakage current Do not use the NPCAPTM capacitor in circuits where the capacitor is repetitively charged and discharged rapidly. Repetitively charging and discharging the capacitor rapidly may reduce the capacitance or may cause damage due to internal heating. Use of a protective circuit to ensure reliability is recommended when rush currents exceed 20A. 9 ) Leakage current The leakage current may increase when the capacitors are subjected to the conditions below. After that, however, the leakage current will gradually decrease by self-healing action of the dielectric oxide layer when the capacitors are applied with a voltage less than the rated voltage within the Category Temperature range. As the voltage is closer to the rated voltage and the temperature is closer to the upper limit of Category Temperature range, the leakage current decreases faster. The leakage current will increase by the following factors, Soldering Testing of high temperature exposure with no voltage applied, high temperature/humidity storage, temperature cycles, etc. 2 ) Circuit Design Verify the following before designing the circuit: The electrical characteristics of the capacitor will vary depending on differences in temperature and frequency. You had better design after verifying the scope of these factors. When connecting two or more capacitors in parallel, ensure that the design takes current balancing into account. When two or more capacitors are connected in series, variability in applied voltage may cause over-voltage conditions. Contact Nippon Chemi-Con before using capacitors connected in series. Avoid putting heat generating parts either around the capacitor or on the reverse of the circuit board. 10 ) Failures and Service Life Based on the JIS C 5003 Standard, the failure rate for NPCAPTM capacitors (with a 60% reliability standard) is as follows: 0.5%/1,000 hours (applied the rate voltage at the upper limit of Category Temperature range) (1) Failure Modes The principal failure mode is wear-out failure, that is, capacitance decreases and ESR increases, and eventually the capacitors become open circuit failure. In addition, short circuit failure may happen with over-voltage and excessive current applied to the capacitors. The failure rate would be reduced by reducing ambient temperatures, ripple current and applying voltage. If the short-circuited capacitor, which may be caused by over-voltages higher than the rated voltage or other conditions, has a large amount of current passed through, the aluminum can of the capacitor bulges and might be expelled with odor gas emitted. The product contains flammable materials. If the short causes a spark it may ignite. Please be careful when installing the product, its position and the layout design. * Increase safety by using in conjunction with a protective circuit or protective equipment. * Install measures such as redundant circuits so that the failure of a part of the equipment will not cause unstable operation. (2) Service Life NPCAPTM uses rubber as the sealing material, so the service life depends on the thermal integrity of this rubber. Consequently, it is recommended to use the capacitor at a lower temperature than the maximum temperature for the capacitor category. 3 ) Use in High Reliable and Critical Applications Consult with Nippon Chemi-Con before using these capacitors in applications involving human life: Aviation/aerospace equipment, Nuclear power equipment, Medical equipment and Automotive equipment, or in applications where capacitor failure could have a major impact. 4 ) Polarity The NPCAPTM is a polarized solid aluminum electrolytic capacitor. Do not apply either reverse voltages or AC voltages to the polarized capacitors, using reversed polarity may cause a short circuit. Refer to the catalog, product specifications or capacitor body to confirm the polarity prior to use. 5 ) Operating Voltage Do not apply a greater than rated voltage, if a voltage greater than the rated voltage is suddenly applied the leakage current increases causing shorting. The peak voltage of superimposed AC voltages (ripple voltages) on DC voltages must not exceed the full rated voltage. While there are specifications for surge voltages exceeding the rated voltage, usage conditions apply, and continued operation for extended periods of time under such conditions cannot be guaranteed. 6 ) Ripple Current Do not apply currents in excess of the rated ripple current. The superimposition of a large ripple current increases the rate of heating within the capacitor. When excessive ripple current is imposed the internal temperature increases which can shorten life and shorting may occur. 11 ) Capacitor Insulation Insulation of the capacitor's case is not guaranteed. Ensure electrical insulation between the capacitor case, negative electrode, positive electrode and circuit pattern. 7 ) Operating Temperature Use within the stated category temperature range, if used outside this range, characteristics can deteriorate potentially leading to problems. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 20 CAT. No. E1001O Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) 12 ) Capacitor Usage Environment Do not use/expose capacitors to the following conditions. Oil, water, salty water, take care to avoid storage in damp locations. Direct sunlight Toxic gases such as hydrogen, sulfide, sulfurous acids, nitrous acids, chlorine and chlorine compounds, bromine and bromine compounds, ammonia, etc. Ozone, ultraviolet rays and radiation. Severe vibration or mechanical shock conditions beyond the limits advised in the product specification section of the catalog. 13 ) Capacitor mounting For the surface mount capacitor, design the solder land on the PC board in accordance with the catalog or the product specification. For radial capacitors, design the terminal holes on the PC board to fit the terminal dimension of the capacitor. Do not pass any circuit traces beneath the seal side of a capacitor. The trace must pass 1 to 2mm to the side of the capacitor. Do not pass any via holes underneath a capacitor on double sided PC board In designing double-sided PC boards,do not locate any copper trace under the seal side of a capacitor 2 Installing Capacitors 1 ) Installing Do not reuse capacitors already assembled in equipment that have been exposed to power. The capacitor may have self charge. If this happens, discharge the capacitor through a resistor of approximately 1k before use. If capacitors are stored at a temperature of 35 or more and more than 75%RH, the leakage current may increase. This may also occur if the capacitors are stored for a longer period than the period which is specified in the catalog or the product specification. In this case, they can be reformed by the voltage treatment through a resistor of approximately 1k . Verify the rated capacitance and voltage of the capacitors when installing. Verify the polarity of the capacitors. Do not use the capacitors if they have been dropped on the floor. Do not deform the case of the capacitors. Verify that the lead spacing of the capacitor fits the hole spacing in the PC board before installing the capacitors. Do not apply any mechanical force in excess of the limits prescribed in the catalog or the product specification of the capacitors. Avoid subjecting the capacitor to strong forces, as this may break the electrode terminals, bend or deform the capacitor, or damage the packaging, and may also cause short/open circuits, increased leakage current, or damage the appearance. Also, note the capacitors may be damaged by mechanical shocks caused by cut the lead wire, the vacuum/insertion head, component checker or centering operation of an automatic mounting or insertion machine. * That the soldering conditions (temperature and time) are within the ranges specified in the catalog or product specifications. * That the tip of the soldering iron does not come into contact with the capacitor itself. Verify the following when flow soldering: * Do not dip the body of a capacitor into the solder bath only dip the terminals in. The soldering must be done on the reverse side of PC board. * Soldering conditions (preheat, solder temperature and dipping time) should be within the limits prescribed in the catalog or the product specifications. * Do not apply flux to any part of capacitors other than their terminals. * Make sure the capacitors do not come into contact with any other components while soldering. Verify the following when reflow soldering: * Soldering conditions (preheat, solder temperature and soldering time) should be within the limits prescribed in the catalogs or the product specification. * The heat level should be appropriate. (Note that the thermal stress on the capacitor varies depending on the type and position of the heater in the reflow oven, and the color and material of the capacitor.) * Please consult us about Vapor phase soldering (VPS). * Except for the surface mount type, reflow soldering must not be used for the capacitors. Do not reuse a capacitor that has already been soldered to PC board and then removed. When using a new capacitor in the same location, remove the flux, etc. first, and then use a soldering iron to solder on the new capacitor in accordance with the specifications. Confirm before running into soldering that the capacitors are SMD for reflow soldering. 3 ) Handling After Soldering Do not apply any mechanical stress to the capacitor after soldering onto the PC board. Do not lean or twist the body of the capacitor after soldering the capacitors onto the PC board. Do not use the capacitors for lifting or carrying the assembly board. Do not hit or poke the capacitor after soldering to PC board. When stacking the assembly board, be careful that other components do not touch the aluminum electrolytic capacitors. Do not drop the assembled board. 4 ) Cleaning PC boards Do not wash capacitors by using the following cleaning agents. Solvent resistant capacitors are only suitable for washing using the cleaning conditions prescribed in the catalog or the product specification. In particular, ultrasonic cleaning will accelerate damage to capacitors. * Halogenated solvents; cause capacitors to fail due to corrosion. * Alkali system solvents; corrode (dissolve) an aluminum case. * Petroleum system solvents; cause the rubber seal material to deteriorate. * Xylene; causes the rubber seal material to deteriorate. * Acetone; erases the markings. CFC alternatives or the other cleaners above; please consult with us Verify the following points when washing capacitors. * Monitor conductivity, pH, specific gravity and the water content of cleaning agents. Contamination adversely affects these characteristics. * Be sure not to expose the capacitors under solvent rich conditions or keep capacitors inside a closed container. In addition, please dry the solvent sufficiently on the PC board and the capacitor with an air knife (temperature 2 ) Heat Resistance during Soldering Ensure that the soldering conditions meet the specifications recommended by Nippon Chemi-Con. Note that the leakage current may increase or capacitance may decrease due to thermal stresses that occur during soldering, etc. Furthermore, the leakage current which rose gradually decreases, when voltage is applied at below the category upper limit temperature. Additionally the self repairing action is faster when voltage near the rated voltage rather than at a higher voltage is applied at below the category's upper temperature limit. Verify the following before using a soldering iron: Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 21 CAT. No. E1001O Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) Precautions during "Fumigation" using halogenated chemical such as Methyl Bromide must be taken. Halogen gas can penetrate packaging materials such as cardboard boxes and vinyl bags. Penetration of the halogenated gas can cause corrosion of Electrolytic capacitors. Nippon Chemi-Con gives consideration to the packaging materials not to require the Fumigation. Verify whether the assembled PC board, products and capacitors themselves are subjected to Fumigation during their transportation or not. should be less than the maximum rated category temperature of the capacitor) for 10 minutes. Aluminum electrolytic capacitors can be characteristically and catastrophically damaged by halogen ions, particularly by chlorine ions, though the degree of the damage mainly depends upon the characteristics of the electrolyte and rubber seal material. When halogen ions come into contact with the capacitors, the foil corrodes when a voltage is applied. This corrosion causes an extremely high leakage current which results venting and an open circuit. If the new types of cleaning agents mentioned below are used, the following are recommended as cleaning conditions for some of new cleaning agents. 3 The Operation of Devices 1 ) Do not touch the capacitor terminals directly. 2 ) Do not short-circuit the terminal of a capacitor by letting it -Higher alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750 H, 750K, 750L, and 710M (Kao) Technocare FRW-14 through 17 (Momentive performance material) Cleaning Conditions: Using these cleaning agents, capacitors are capable of withstanding immersion or ultrasonic cleaning for 10 minutes at a maximum liquid temperature of 60. Find optimum condition for washing, rinsing, and drying. Be sure not to rub the marking off the capacitor which can be caused by contact with other components or the PC board. Note that shower cleaning adversely affects the markings on the sleeve. come into contact with any conductive object. Also, do not spill electric-conductive liquid such as acid or alkaline solution over the capacitor. 3 ) Do not use capacitors in circumstances where they would be subject to exposure to the following materials * Oil, water, salty water or damp location. * Direct sunlight. * Ozone, ultraviolet rays or radiation. * Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine or its compounds, and ammonium. * Severe vibration or mechanical shock conditions beyond the limits prescribed in the catalog or product specification. -Non-Halogenated Solvent Cleaning AK225AES (Asahi Glass) Cleaning Conditions: Immersion, ultrasonic or vapor cleaning for 5 minutes. However, from an environmental point of view, these types of solvent will be banned in near future. We would recommend not using them if at all possible. 4 Maintenance Inspection 1 ) Make periodic inspections of capacitors that have been used in industrial applications. Before inspection, turn off the power supply and carefully discharge the electricity in the capacitors. Verify the polarity when measuring the capacitors with a volt-ohm meter. Do not apply any mechanical stress to the terminals of the capacitors. 2 ) The following items should be checked during the periodic inspections. Significant damage in appearance Electrical characteristics: leakage current, capacitance, tan and other characteristics prescribed in the catalog or product specification. We recommend replacing the capacitors if the parts are out of specification. -Isopropyl Alcohol (IPA) IPA (Isopropyl Alcohol) is one of the most acceptable cleaning agents; it is necessary to maintain a flux content in the cleaning liquid at a maximum limit of 2 Wt.%. 5 ) Precautions for using adhesives and coating materials Do not use any adhesive and coating materials containing halogenated solvent. Verify the following before using adhesive and coating material. * Remove flux and dust left over between the rubber seal and the PC board before applying adhesive or coating materials to the capacitor. * Dry and remove any residual cleaning agents before applying adhesive and coating materials to the capacitors. Do not cover over the whole surface of the rubber seal with the adhesive or coating materials. * For permissible heat conditions for curing adhesives or coating materials, please consult with us. * Covering over the whole surface of the capacitor rubber seal with resin may result in a hazardous condition because the inside pressure cannot be completely released. Also, a large amount of halogen ions in resins will cause the capacitors to fail because the halogen ions penetrate into the rubber seal and the inside of the capacitor. * Some coating materials, it cannot be implemented to the capacitor. Please note change on the surface might be caused according to the kind of solvents used for mounting adhesives and coating agents. 5 Contingencies 1 ) If gas has vented from the capacitor during use, there is a short circuit and burning, or the capacitor discharges an odor or smoke, turn off the main power supply to the equipment or unplug the power cord. 2 ) If there is a problem with the capacitor or a fire breaks out, the capacitor may produce a burning gas or reactive gas from the outer resin, etc. If this happens, keep your hands and face away from the gas. If vented gas is inhaled or comes into contact with your eyes, flush your eyes immediately with water and/or gargle. If vented gas comes into contact with the skin, wash the affected area thoroughly with soap and water. 6 Storage We recommend the following conditions for storage. 1 ) Store capacitors in a cool, dry place. Store at a temperature between 5 and 35, with a humidity of 75% or less. (table-1) 6 ) Fumigation Before the bag is opened After the bag is opened SMD Within 3 years after manufacturing Within 6 months after the bag is opened Radial Within 3 years after manufacturing - In many cases when exporting or importing electronic devices, such as capacitors, wooden packaging is used. In order to control insects it may become necessary to fumigate the shipment. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 22 CAT. No. E1001O Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) SMD products are sealed in a special laminated aluminum bag. Use all capacitors once the bag is opened. Return unused capacitors to the bag, and seal it with a zipper. Please refer to (Table -1) for storage conditions. Be sure to follow our recommendations for reflow soldering. 2) Store the capacitors in a location free from direct contact with water, salt water, and oil. 3) Store in a location where the capacitor is not exposed to toxic gas, such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine or chlorine compounds, bromine or other halogen gases, methyl bromide or other halogen compounds, ammonia, or similar. 4) Store in a location where the capacitor is not exposed to ozone, ultraviolet radiation, or other radiation. 5) It is recommended to store capacitors in their original packaging wherever possible. 6) The JEDEC J-STD-020 standard does not apply. 7 Disposal Please consult with a local industrial waste disposal specialist when disposing of aluminum electrolytic capacitors. 8 About AEC-Q200 The Automotive Electronics Council (AEC) was originally established by American major automotive manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for "stress test qualification" and "reliability test" for the electronic components. AEC-Q200 is the reliability test standard for approval of passive components, it has been specified test subjects and quantity etc. for each components. Criteria of reliability tests for Aluminum Electrolytic Capacitors are also described in this. As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for the Aluminum Electrolytic Capacitors used in automotive applications to increase in recent years. Please contact us for more information. 9 Regarding compliance for EU REACH Regulation 1) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are "articles without any intended release". Therefore they are not applicable for "Registration" for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society "Study of REACH Regulation in EU about Electrolytic Capacitor" (publicized on 13 March 2008) 2) Nippon Chemi-Con develops the products without substance of very high concern(SVHC).DEHP(CASNo.11 7-81-7) was contained as some covering material, Nippon Chemi-Con abolished use of DEHP totally at June, 2011. 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA/EIAJ RCR-2367C (March 2006) with the title of "Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment". Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 23 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Lifetime Estimation of Conductive Polymer Aluminum Solid Capacitors Conductive polymer aluminum solid capacitors are finite life electronic components like aluminum electrolytic capacitors. The lifetime is affected by ambient temperature, humidity, ripple current and surge voltage. The lifetime of aluminum electrolytic capacitors is affected mainly by the loss of electrolyte as the result of the liquid electrolyte evaporating through the rubber seal materials, resulting in capacitance drop and tan rise. On the other hand, the lifetime of conductive polymer aluminum solid capacitors is affected mainly by oxidation degradation of the conductive polymer caused by osmose of oxygen or the thermal degradation of the conductive polymer by ambient temperature or self-heating, resulting in ESR rise and tan rise. The infiltration rate of the oxygen is depend on the temperature as the liquid electrolyte evaporation and the relationship follows the Arrhenius's Law, too. Similarly, thermal degradation of the conductive polymer by self-heating follows the Arrhenius's Law, too. Therefore, the lifetime estimation has been using the theory of lifetime reducing by half at every 10 rise of the ambient temperature. 1. Lifetime Estimation Equation (1) can be used for estimating the lifetime of the conductive polymer aluminum solid capacitors based on the ambient temperature and the rise of internal temperature due to ripple current. Lx=Lox2 To-Tx 10 -T x 2 10 (1) Lx Estimation of actual lifetime (hour) Lo Specified lifetime with the rated voltage at the upper limit of the category temperature (hour) To Maximum category temperature () Tx Actual ambient temperature of the capacitor () (Note: Tx should be 40 if the actual ambient temperature is below it) TRise of internal temperature due to the rated ripple current () Longer lifetime is expected by lowering the ripple current and the ambient temperature. Please consult us about lifetime equations for the series of the category temperature 125. Subject series: PXD, PXH. An approximate value of ripple current-caused T can be calculated using Equation (2) T=Tox Ix Io 2 (2) ToRise in internal temperature due to the rated ripple current () : different for each series, Please consult us Ix Operating ripple current (Arms) actually flowing in the capacitor Io Rated ripple current (Arms), frequency compensated, at the upper limit of the category temperature range To determine more accurate values of T, they can be actually measured using a thermocouple. 2. Rated Ripple Current Frequency Multipliers Self-heat rise is generated by the ripple current even though the conductive polymer aluminum solid capacitors have low ESR compared to liquid based electrolyte aluminum electrolytic capacitor. Longer lifetime is expected by lowering the ripple current and the ambient temperature. Table 1 shows Frequency Multipliers of Rated ripple current. Table1. Frequency Multipliers Frequency [Hz] 120 1k 10k 50k 100k to 500k SMD type 0.05 0.30 0.55 0.70 1.00 Radial lead type 0.10 0.35 0.60 0.80 1.00 Conductive polymer aluminum solid capacitors have super low ESR characteristic in high-frequency range. On the whole, ESR in low-frequency range relatively rises. Therefore, they can use only small ripple current in low-frequency range. Please ensure that excessive ripple current is not applied to the capacitors in all frequency range. 3. Restriction of calculated lifetime The result calculated by the estimated lifetime formula, it is not guaranteed lifetime by Nippon Chemi-Con Corporation. When designer calculate the lifetime of apparatus, please include an ample margin in consideration to the estimated lifetime of a capacitor. When calculated lifetime result are over 15 years (131,400 hrs.) by using the estimated lifetime formula, please consider 15 years to be a maximum in considering that the sealing rubber characteristics vary during the lifetime. If 15 years or more may be required as an expected lifetime, please consult us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Product code guide (Conductive polymer Surface mount type) (Example : PXA series, 4V-150F, 6.3x5.7L) Please refer to the following table Contents Code Conductive Polymer Series Code Type Code PXA PXA SMD A A 1 2 3 4 5 6 7 A PXA 4R0 Category Series code Voltage code Voltage(V) Code 2 2R0 2.5 2R5 4 6.3 4R0 6R3 Tol.(%) 20 Plastic Reel Terminal plating material Code M Sn-Bi G 8 9 10 11 12 13 14 15 16 17 18 A RA 1 5 1 M F 60 G TapingTray code Terminal code Capacitance code Capacitance tolerance 3.3 Code 3R3 Cap.(F) Reel dia. Application size Code (mm) D(mm) Type Code Supplement code Size code D(mm) Code 4 D L(mm) Code 3.9 4.0 380 D=4 to 10 RA 4.7 4R7 5 E 4.4 45 330 D=8 to 10 RB 10 6.3 F 4.5 46 47 100 470 8 H 5.2 55 10 J Refer to product guide for taping specifications. 10 100 100 101 5.7 60 16 160 471 5.8 61 20 200 470 1,000 102 6.7 70 25 250 7.7 80 10 A0 12 C0 12.2 C0 *Refer to the appendix (Part number) for codes not listed here. Product code guide (Conductive polymer Radial lead type) (Example : PSC series, 6.3V-470F, 8x8L,Long Lead with bulk) Please refer to the following table Contents Code Conductive Polymer 1 Series Code Type Code Tol.(%) Code PSC PSC Radial lead E 20 M PS PS- A 2 3 4 5 6 9 10 11 12 13 14 15 16 17 18 E L L 4 7 1 M H 08 S 6R3 Category Series code Voltage code 2R0 2.5 2R5 S 8 PSC 2 Sn 7 A Voltage(V) Code Terminal plating material Code Terminal code Type TapingTray code Capacitance code Capacitance tolerance Size code D(mm) Code Supplement code L(mm) Code Contents Code Cap.(F) Code Lead forming (Bulk) Long Lead LL 3.3 3R3 5 E 5 Cut(3.5mm) C3 4.7 4R7 6.3 F Cut(5.0mm) C5 10 100 8 Taping Straight TD 47 10 H J 6 8 4 4R0 6.3 6R3 10 100 100 470 101 16 160 470 471 20 200 1,000 102 25 35 250 350 Refer to product guide for taping specifications. 10.5 05 06 08 A5 11.5 B5 12.5 C5 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 24 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List SURFACE MOUNT TYPE (2.5 to 10Vdc) 1 2 ESR(m max.)20, 100k to 300kHz Rated ripple current(mArms)105, 100kHz Rated voltage(Vdc) Cap F 2.5 Series 4.7 6.8 10 15 22 33 Nominal Case size (DxL) 4 ESR 1 Ripple current2 Series Nominal Case size (DxL) 6.3 ESR1 Ripple current2 Series PXA PXA 4 x 5.2 200 740 Nominal Case size (DxL) 10 ESR1 4 x 5.2 200 Ripple current2 PXS PXA 5 x 5.8 5 x 5.7 30 35 1970 1380 56 PXD 5 x 5.8 45 1380 68 PXA 6.3 x 5.7 27 2400 82 PXA PXA PXA PXH PXS PXE PXA PXA PXA PXA PXD PXH PXS PXE PXA 6.3 x 4.4 6.3 x 5.2 6.3 x 5.7 6.3 x 5.7 5 x 5.8 5 x 5.8 5 x 5.7 6.3 x 4.4 6.3 x 5.2 6.3 x 5.7 6.3 x 5.8 6.3 x 5.7 6.3 x 5.8 5 x 5.8 6.3 x 5.7 40 27 27 40 25 24 35 40 27 27 35 40 22 24 27 1670 2400 2400 2400 2150 2500 1380 1670 2400 2400 2400 2400 2570 2500 2400 PXK PXF PXF PXF PXA PXH PXK PXK PXS PXF PXF PXE PXA PXD PXH PXF PXE 6.3 x 4.5 5 x 3.9 5 x 4.5 5 x 5.8 8 x 6.7 8 x 6.7 5 x 5.8 6.3 x 4.5 6.3 x 5.8 5 x 5.8 6.3 x 5.8 6.3 x 5.8 8 x 6.7 8 x 6.7 8 x 6.7 6.3 x 7.7 6.3 x 7.7 19 20 25 12 25 30 17 18 22 12 10 15 25 30 30 9 14 2780 2700 2100 3500 3020 3020 3390 3200 2570 3500 3900 3160 3020 3020 3020 4200 3470 PXK PXF PXF PXF PXE PXE PXA PXS PXF PXE PXA PXF PXE PXA PXA PXD PXH PXF 6.3 x 5.8 6.3 x 5.8 6.3 x 7.7 8 x 6.7 6.3 x 7.7 8 x 6.7 10 x 7.7 8 x 6.7 8 x 6.7 8 x 6.7 8 x 12 8 x 7.7 8 x 7.7 8 x 12 10 x 7.7 10 x 7.7 10 x 7.7 8 x 7.7 17 10 9 10 14 14 20 22 10 14 12 9 13 12 20 25 25 9 3390 3900 4200 4500 3470 3950 4130 3220 4500 3950 4770 4500 3950 4770 4130 3500 3700 4500 120 PXD 5 x 5.8 40 1450 150 180 220 PXE PXK PXF PXF PXA PXA PXD PXH 5 x 5.8 6.3 x 4.5 5 x 3.9 5 x 4.5 6.3 x 5.2 6.3 x 5.7 6.3 x 5.8 6.3 x 5.7 21 19 12 25 25 25 30 35 2670 2780 3300 2100 2500 2500 2500 2500 270 PXE PXA PXA 5 x 5.8 6.3 x 5.2 6.3 x 5.7 22 26 26 2610 2450 2450 PXA 6.3 x 4.4 38 1710 PXS PXE PXA PXA PXA PXH PXK PXK PXA PXH 5 x 5.8 5 x 5.8 5 x 5.7 6.3 x 5.2 6.3 x 5.7 6.3 x 5.7 6.3 x 4.5 5 x 5.8 8 x 6.7 8 x 6.7 25 22 30 26 26 35 19 17 25 30 2150 2610 1490 2450 2450 2450 2780 3390 3020 3020 PXE 6.3 x 5.8 15 3160 330 PXK PXK PXF PXF 5 x 5.8 6.3 x 4.5 5 x 5.8 6.3 x 4.4 16 16 10 12 3500 3500 3900 3500 PXF PXE PXA 6.3 x 5.8 6.3 x 5.8 8 x 6.7 10 15 25 3900 3160 3020 390 PXF PXF PXE 5 x 5.8 6.3 x 5.8 6.3 x 5.8 10 10 15 3900 3900 3160 PXK PXF PXE 6.3 x 5.8 6.3 x 7.7 6.3 x 7.7 17 9 14 3390 4200 3470 470 PXF PXE 6.3 x 7.7 6.3 x 7.7 9 13 4200 3600 PXF PXE PXA 8 x 6.7 8 x 6.7 10 x 7.7 10 14 20 4500 3950 4130 560 PXK PXF PXF PXF PXE PXE PXA PXH 6.3 x 5.8 6.3 x 5.8 6.3 x 7.7 8 x 6.7 6.3 x 7.7 8 x 6.7 8 x 6.7 8 x 6.7 16 10 9 10 13 13 23 30 3500 3900 4200 4500 3600 4100 3100 3100 PXS PXF PXE PXA 8 x 6.7 8 x 6.7 8 x 6.7 8 x 12 22 10 14 12 3220 4500 3950 4770 Nominal Case size (DxL) ESR1 Ripple current2 PXA PXA PXA PXA 4 x 5.2 4 x 5.2 4 x 5.2 4 x 5.2 240 240 220 200 670 670 700 740 PXS PXA PXE PXA PXA PXA PXD PXE PXA PXA PXD PXH PXS PXE 5 x 5.8 5 x 5.7 5 x 5.8 5 x 5.7 6.3 x 4.4 6.3 x 5.7 5 x 5.8 5 x 5.8 6.3 x 5.2 6.3 x 5.7 6.3 x 5.8 6.3 x 5.7 5 x 5.8 5 x 5.8 70 40 28 40 41 31 50 28 31 31 40 45 30 28 1100 1270 2310 1270 1560 2250 1270 2310 2250 2250 2250 2250 1970 2310 PXS PXF PXE PXA PXH PXS PXE PXA PXD PXH 6.3 x 5.8 5 x 5.8 6.3 x 5.8 8 x 6.7 8 x 6.7 8 x 6.7 6.3 x 7.7 8 x 6.7 8 x 6.7 8 x 6.7 27 22 25 27 35 30 21 27 35 35 2320 2600 2530 2800 2800 2760 2880 2800 2800 2800 PXE 8 x 6.7 21 3220 PXF PXE PXA PXA PXE PXA PXA PXD PXH 6.3 x 5.8 8 x 6.7 8 x 12 10 x 7.7 8 x 7.7 8 x 12 10 x 7.7 10 x 7.7 10 x 7.7 20 21 14 24 19 14 24 25 30 2800 3220 4420 3770 3390 4420 3770 3500 3700 PXE 8 x 10 17 4000 PXE PXA 10 x 7.7 10 x 12.2 19 12 3800 5300 PXA 10 x 12.2 12 5300 740 47 100 Series Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 25 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List SURFACE MOUNT TYPE (2 to 10Vdc) Cap F 680 2 1 2 Rated voltage(Vdc) 4 2.5 ESR(m max.)20, 100k to 300kHz Rated ripple current(mArms)105, 100kHz 6.3 10 Nominal Nominal Nominal Nominal Nominal Series Case size ESR1 Ripple 2 Series Case size ESR1 Ripple 2 Series Case size ESR1 Ripple 2 Series Case size ESR 1 Ripple 2 Series Case size ESR1 Ripple 2 current current current current current (DxL) (DxL) (DxL) (DxL) (DxL) PXF 6.3x5.8 12 3500 820 1000 1200 1500 1800 2200 2700 PXF PXE PXA 8x6.7 8x6.7 8x12 10 13 12 4500 4100 4770 PXE PXE 8x7.7 8x12 12 9 4260 5400 PXF 8x7.7 PXE 8x7.7 PXA 10x7.7 PXH 10x7.7 PXE 10x7.7 9 12 19 25 13 4500 4260 4240 3700 4450 PXE 8x10 PXE 8x12 PXA 10x12.2 10 9 10 5220 5400 5500 PXE 10x10 PXE 10x12.2 10 9 PXF 8x7.7 PXE 8x7.7 PXA 10x7.7 PXH 10x7.7 PXA 10x12.2 9 13 20 25 10 4500 3950 4130 3700 5500 PXE 8x10 PXE 10x7.7 10 14 5220 4300 PXE 8x12 PXE 10x10 PXA 10x12.2 PXE 10x10 9 10 10 10 5400 5500 5500 5500 PXE 10x10 PXE 10x12.2 10 9 5500 5600 PXA 10x12.2 10 5500 PXE 8x10 PXE 8x12 PXE 10x7.7 PXA 10x12.2 12 10 14 10 4770 5150 4300 5500 PXE 10x10 12 5025 PXE 10x10 PXE 10x12.2 12 10 5025 5500 PXE 10 x 10 13 4820 5500 5600 SURFACE MOUNT TYPE (16 to 25Vdc) Cap F 3.3 10 15 22 27 33 39 47 16 PXA 4x5.2 260 82 100 120 150 180 220 270 330 390 560 820 1000 23 25 660 PXS 5x5.8 PXA 5x5.7 PXA 6.3x4.4 90 45 45 1060 1210 1490 PXE PXA PXG PXS PXS PXE PXA PXA PXH 35 37 50 35 37 35 37 37 50 2070 2050 1860 1820 2050 2070 2050 2050 2050 5x5.8 6.3x5.7 5x4.5 5x5.8 6.3x5.8 5x5.8 6.3x5.2 6.3x5.7 6.3x5.7 56 68 Rated voltage(Vdc) 20 Nominal Nominal Nominal Nominal Ripple Ripple Ripple Ripple Series Case size ESR1 current2 Series Case size ESR1 current2 Series Case size ESR1 current2 Series Case size ESR1 current2 (DxL) (DxL) (DxL) (DxL) PXG PXS PXE PXS PXE PXA PXH PXG PXK PXE PXE PXS PXE PXE PXA PXH PXG PXE PXA PXA PXH PXG PXE PXE PXA PXG PXG PXG PXG PXE PXA PXG 6.3x4.4 6.3x5.8 6.3x5.8 8x6.7 6.3x7.7 8x6.7 8x6.7 5x5.8 6.3x5.8 6.3x7.7 8x6.7 8x6.7 8x6.7 8x7.7 10x7.7 10x7.7 6.3x5.8 8x10 8x12 10x7.7 10x7.7 6.3x7.7 8x10 10x7.7 10x12.2 8x6.7 8x6.7 8x7.7 8x10 10x10 10x12.2 10x7.7 40 30 28 30 24 30 40 27 24 24 24 27 24 22 26 35 22 18 16 26 35 22 18 22 14 22 22 21 21 16 14 20 2450 2200 2390 2760 2700 2700 2700 3000 2490 2700 3010 2900 3010 3150 3430 3020 3300 3890 4360 3430 3020 3300 3890 3450 5050 3300 3300 3400 3400 4350 5050 3800 PXG PXG PXG PXG PXG PXG 8x10 10x7.7 10x10 10x12.2 10x10 10x12.2 18 20 16 12 18 12 3900 3800 4200 5400 4100 5400 PXG 5x4.5 PXA 6.3x5.7 60 65 1700 1500 PXG 5x5.8 PXG 6.3x4.4 PXA 8x6.7 PXG 5x5.8 40 45 50 40 2450 2350 1800 2450 2000 PXG 6.3x5.8 PXA 10x7.7 30 45 2800 2100 30 42 45 45 30 2800 2400 2000 2000 2800 PXG 6.3x5.8 30 2800 PXG 6.3x5.8 PXG 6.3x7.7 PXG 8x6.7 30 28 28 2800 2800 3000 40 45 2500 2400 PXG 8x7.7 26 3100 PXG 8x10 24 3300 PXA PXA PXA PXH PXG 6.3x4.4 6.3x5.2 6.3x5.7 6.3x5.7 5x4.5 57 50 50 60 55 1300 1650 1650 1650 1770 PXA 8x6.7 45 PXG 5x5.8 PXG 6.3x4.4 PXA 8x6.7 PXH 8x6.7 PXG 5x5.8 PXA PXH 10x7.7 10x7.7 PXA 6.3x4.4 57 1300 PXG 6.3x5.8 25 3200 PXG 8x10 22 3500 PXG 6.3x7.7 PXA 10x12.2 25 20 3200 4320 PXG 10x7.7 25 3400 PXG 8x6.7 25 3200 PXG PXG 8x7.7 8x10 23 23 3300 3400 PXG 10x10 20 3800 PXG PXG PXG 8x10 10x7.7 10x10 20 22 18 3700 3650 4100 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 26 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List RADIAL LEAD TYPE (2 to 10Vdc) Cap F 47 68 100 150 220 270 2 1 2 Rated voltage(Vdc) 4 2.5 6.3 10 Nominal Nominal Nominal Nominal Nominal Ripple Ripple Ripple Ripple Ripple Series Case size ESR1 Series Case size ESR1 Series Case size ESR1 Series Case size ESR1 Series Case size ESR1 current2 current2 current2 current2 current2 (DxL) (DxL) (DxL) (DxL) (DxL) PSK 5x8 7 4350 PSA 6.3x10.5 330 PSK 5x8 PSF 6.3x8 PSA 6.3x10.5 390 7 5 20 4350 5900 3160 PSK 5x8 PSA 6.3x10.5 470 PSK 5x8 PSF 6.3x8 7 5 4350 5900 PSF 6.3x8 560 PSK 5x8 PSF 6.3x8 PSC 8x8 7 5 7 4350 5900 6100 680 PSE 8x6 PSA 8x11.5 PS 8x11.5 PSF 6.3x8 PSE 6.3x8 PSC 8x8 PSC 8x8 PSA 8x11.5 PS 8x11.5 PSC 8x8 PSC 8x11.5 PSA 10x11.5 PSF 6.3x8 PSC 8x11.5 PSA 10x11.5 PS 10x12.5 PSF 8x8 PSC 10x11.5 8 7 10 5 7 5 7 7 10 7 7 6 5 7 7 8 5 8 4900 5580 5230 5900 5000 6100 6100 5580 5230 6100 6100 5860 5900 6100 5860 5500 6100 5560 PSF 6.3x8 PSE 6.3x8 PSC 8x8 PSA 8x11.5 PS 8x11.5 PSC 8x11.5 820 1000 ESR(m max.)20, 100k to 300kHz Rated ripple current(mArms)105, 100kHz PSF 6.3x8 5 5900 1200 1500 1600 2700 20 3160 8 4050 24 3300 5 5900 5 7 7 7 10 7 5900 5000 6100 5580 5230 6100 PSA 6.3x10.5 PSK 5x8 20 10 3160 3700 PSK 5x8 PSA 6.3x10.5 PSA 8x11.5 PS 8x11.5 PSE 6.3x8 PSC 8x8 PSA 8x11.5 PS 8x11.5 PSE 6.3x8 PSC 8x8 8 28 8 12 8 8 7 12 8 8 4050 3190 5080 4770 4700 5700 5700 4770 4700 5700 PSA PS 10x11.5 10x12.5 7 10 5860 5500 PSA PS 10x11.5 10x12.5 6 8 5860 5500 PSF 6.3x8 PSC 10x11.5 PS 10x12.5 8 7 10 4700 6640 5500 PSC PS 10x11.5 10x12.5 6 8 6640 5500 PS 10x12.5 10 5500 PS 10x12.5 8 5500 PSC 10x11.5 10 5560 PSA PSA PSA PSA 6.3 x 10.5 6.3 x 10.5 6.3 x 10.5 6.3 x 10.5 25 25 25 25 2820 2820 2820 2820 PSA PS PS 8 x 11.5 8 x 11.5 8 x 11.5 9 14 14 4710 4420 4420 PSC 8 x 11.5 9 5650 PSA PS 10 x 11.5 10 x 12.5 8 12 5650 5300 PS 10 x 12.5 12 5300 PSC 10 x 11.5 7 6100 RADIAL LEAD TYPE (16 to 35Vdc) Rated voltage(Vdc) Cap F 18 33 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 16 20 25 35 Nominal Nominal Nominal Nominal Ripple Ripple Ripple Ripple Series Case size ESR1 Series Case size ESR1 Series Case size ESR 1 Series Case size ESR1 current2 current2 current2 current2 (DxL) (DxL) (DxL) (DxL) PS PS PSF 6.3x5 PSF 6.3x10.5 PSA 6.3x10.5 PS 8x11.5 24 25 25 16 2490 2820 2820 4360 PSG 6.3x5 PS 8x11.5 20 16 3200 4360 PSG 6.3x8 PSG 6.3x8 PSG 8x6 PSF 8x8 PSF 8x11.5 PSC 8x11.5 PS 10x12.5 PSF 8x8 PSC 10x11.5 PSC 10x12.5 PS 10x12.5 10 15 22 10 11 11 14 13 10 10 14 5080 3800 3300 5000 5080 5080 5050 4700 6100 6100 5050 PSG PSF PSF PSC PSG 8x8 8x11.5 10x11.5 10x11.5 8x11.5 16 11 10 10 14 4000 5400 6100 6100 4970 PSG PSG PSG PSG PSG PSG PSG PSG 8x16 10x11.5 8x20 10x11.5 8x20 10x16 10x20 10x20 8 12 8 12 8 8 8 8 7000 5400 7500 5400 7500 7700 8100 8100 PS PSG 6.3x5 PS 8x11.5 PSG 6.3x8 PS 10x12.5 30 24 28 20 2600 3320 2780 4320 PSG PSG PSG 8x8 8x11.5 8x11.5 18 16 16 3770 4650 4650 8x11.5 24 3320 PSG 6.3x5 PS 10x12.5 PSG 6.3x8 20 20 18 3200 4320 3460 PSG 8x8 17 3880 PSG 10x11.5 14 5000 PSG 8x11.5 14 4970 PSG 10x11.5 14 5000 PSG 10x11.5 12 5400 8x11.5 10x12.5 34 30 2830 3270 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 27 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PXG - Surface Mount Upgrade! Series Super low ESR, high ripple current capability Rated voltage range : 16 to 25Vdc, Capacitance range : 10 to 1,000F Case size : 5x4.5L to10x12.2L Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXG Downsized PXE P36 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105 16 to 25Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours (E46,F45 : 3,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours). Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k)and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Code : A P C0.2 W B0.2 D0.5 Terminal MARKING Size Code E46 E61 F45 F61 F80 H70 H80 HA0 J80 JA0 JC0 0.3max. L0.3 (Note) A0.2 Note : L+0.1/-0.2 for E46 and F45 L0.5 for HA0, JA0 and JC0 L A B C D 5 4.5 5.3 5.3 5.9 5 5.8 5.3 5.3 5.9 6.3 4.4 6.6 6.6 7.2 6.3 5.8 6.6 6.6 7.2 6.3 7.7 6.6 6.6 7.2 8 6.7 8.3 8.3 9.0 8 7.7 8.3 8.3 9.0 8 10.0 8.3 8.3 9.0 10 7.7 10.3 10.3 11.0 10 10.0 10.3 10.3 11.0 10 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.4 1.9 1.9 1.9 3.1 3.1 3.1 4.5 4.5 4.5 EX) 25V47F G14A 47 25V PART NUMBERING SYSTEM 1 2 3 4 A PXG 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Taping code Terminal code Voltage code (ex. 16V:160, 20V:200) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 28 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXGSeries Upgrade! - STANDARD RATINGS WV (Vdc) 16 20 25 Cap (F) Size code Leakage current (A max./after 2min.) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 39 68 100 180 220 270 330 330 330 560 560 820 820 1,000 1,000 27 47 47 56 120 150 180 220 220 390 390 560 10 22 22 27 39 47 56 56 68 82 100 120 150 220 E46 F45 E61 F61 F80 H70 H70 H80 HA0 HA0 J80 JA0 JC0 JA0 JC0 E46 E61 F45 E61 F61 F80 H70 H80 HA0 HA0 J80 JA0 E46 E61 F45 E61 F61 F61 F61 F80 H70 H80 HA0 HA0 J80 JA0 312 544 320 576 704 864 1,050 1,050 1,050 1,790 1,790 2,620 2,620 3,200 3,200 270 188 470 224 480 600 720 880 880 1,560 1,560 2,240 125 110 275 135 195 235 280 280 340 410 500 600 750 1,100 50 40 27 22 22 22 22 21 21 18 20 16 12 18 12 55 30 42 30 25 25 25 23 23 20 22 18 60 40 45 40 30 30 30 28 28 26 24 22 25 20 1,860 2,450 3,000 3,300 3,300 3,300 3,300 3,400 3,400 3,900 3,800 4,200 5,400 4,100 5,400 1,770 2,800 2,400 2,800 3,200 3,200 3,200 3,300 3,400 3,700 3,650 4,100 1,700 2,450 2,350 2,450 2,800 2,800 2,800 2,800 3,000 3,100 3,300 3,500 3,400 3,800 APXG160ARA390ME46G APXG160ARA680MF45G APXG160ARA101ME61G APXG160ARA181MF61G APXG160ARA221MF80G APXG160ARA271MH70G APXG160ARA331MH70G APXG160ARA331MH80G APXG160ARA331MHA0G APXG160ARA561MHA0G APXG160ARA561MJ80G APXG160ARA821MJA0G APXG160ARA821MJC0G APXG160ARA102MJA0G APXG160ARA102MJC0G APXG200ARA270ME46G APXG200ARA470ME61G APXG200ARA470MF45G APXG200ARA560ME61G APXG200ARA121MF61G APXG200ARA151MF80G APXG200ARA181MH70G APXG200ARA221MH80G APXG200ARA221MHA0G APXG200ARA391MHA0G APXG200ARA391MJ80G APXG200ARA561MJA0G APXG250ARA100ME46G APXG250ARA220ME61G APXG250ARA220MF45G APXG250ARA270ME61G APXG250ARA390MF61G APXG250ARA470MF61G APXG250ARA560MF61G APXG250ARA560MF80G APXG250ARA680MH70G APXG250ARA820MH80G APXG250ARA101MHA0G APXG250ARA121MHA0G APXG250ARA151MJ80G APXG250ARA221MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 29 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXK TM NPCAP Surface Mount - Series Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. Rated voltage range : 2.5 to 16Vdc, Capacitance range : 100 to 560F Suitable for DC-DC converters, voltage regulators and decoupling applications used to computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXK Downsized PXE P36 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105 2.5 to 16Vdc 20% (M) Rated voltagex1.15V Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours (F46 : 3,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours (F46 : 500hours). Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after following voltage treatment. Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] MARKING EX) 2.5V330F Code : A P C0.2 W B0.2 D0.5 Terminal 0.3max. L0.3 (Note) Size Code E61 F46 F61 D 5 6.3 6.3 L 5.8 4.5 5.8 A 5.3 6.6 6.6 B 5.3 6.6 6.6 C 5.9 7.2 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 1.9 K89A 330 2.5V A0.2 Note : L+0.1/-0.2 for F46 PART NUMBERING SYSTEM 1 2 3 4 A PXK 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 560F:561) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 30 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXKSeries - STANDARD RATINGS WV (Vdc) 2.5 4 6.3 16 Cap (F) 220 330 330 560 180 220 390 150 180 220 330 100 Size code Leakage current (A max./after 2min.) F46 E61 F46 F61 F46 E61 F61 F46 E61 F46 F61 F61 300 412 700 700 360 440 780 472 567 700 1,040 320 ESR Rated ripple current (m max./20, 100k to 300kHz) (mArms/105, 100kHz) 19 16 16 16 19 17 17 19 17 18 17 24 2,780 3,500 3,500 3,500 2,780 3,390 3,390 2,780 3,390 3,200 3,390 2,490 Part No. APXK2R5ARA221MF46G APXK2R5ARA331ME61G APXK2R5ARA331MF46G APXK2R5ARA561MF61G APXK4R0ARA181MF46G APXK4R0ARA221ME61G APXK4R0ARA391MF61G APXK6R3ARA151MF46G APXK6R3ARA181ME61G APXK6R3ARA221MF46G APXK6R3ARA331MF61G APXK160ARA101MF61G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 31 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXS TM NPCAP Surface Mount - Series Super low ESR, high ripple current capability Longer life (20,000 hours at 105) Rated voltage range : 4 to 16Vdc, Capacitance range : 22 to 560F Case size : 5x5.8L to8x6.7L Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXS Longer life PXE/PXA P36 P38 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current -55 to +105 4 to 16Vdc 20% (M) Rated voltagex1.15 I=0.2CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 0.12 max. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k)and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] EX) 6.3V390F Code : A W Size Code E61 F61 H70 P C0.2 B0.2 D0.5 Terminal MARKING 0.3max. L0.3 D 5.0 6.3 8.0 L 5.8 5.8 6.7 A 5.3 6.6 8.3 B 5.3 6.6 8.3 C 5.9 7.2 9.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 1.4 1.9 3.1 S69A 390 6.3V A0.2 PART NUMBERING SYSTEM 1 2 3 4 A PXS 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 150F:151) Taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 32 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXSSeries - STANDARD RATINGS WV (Vdc) 4 6.3 10 16 Cap (F) Size code 150 560 47 100 120 220 390 33 68 120 150 22 39 39 68 82 120 E61 H70 E61 E61 F61 F61 H70 E61 E61 F61 H70 E61 E61 F61 F61 H70 H70 ESR (m max./20, 100k to 300kHz) 25 22 30 25 22 22 22 70 30 27 30 90 35 37 30 30 27 Rated ripple current (mArms/105, 100kHz) 2,150 3,220 1,970 2,150 2,570 2,570 3,220 1,100 1,970 2,320 2,760 1,060 1,820 2,050 2,200 2,760 2,900 Part No. APXS4R0ARA151ME61G APXS4R0ARA561MH70G APXS6R3ARA470ME61G APXS6R3ARA101ME61G APXS6R3ARA121MF61G APXS6R3ARA221MF61G APXS6R3ARA391MH70G APXS100ARA330ME61G APXS100ARA680ME61G APXS100ARA121MF61G APXS100ARA151MH70G APXS160ARA220ME61G APXS160ARA390ME61G APXS160ARA390MF61G APXS160ARA680MF61G APXS160ARA820MH70G APXS160ARA121MH70G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 33 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXF TM NPCAP - Surface Mount Upgrade! Series Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. Rated voltage range : 2 to 10Vdc, Capacitance range : 120 to 1,000F Case size range :5x3.9L to8x7.7L Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXF Lower ESR PXE P36 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105 2 to 10Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours (E40, E46, F45 : 3,000 hours ) at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours (E40, E46, F45 : 500 hours ) . Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Terminal Code : A EX) 2.5V390F P 0.3max. L0.3 (Note) Size Code E40 E46 E61 F45 C0.2 B0.2 D0.5 W F61 F80 H70 H80 A0.2 Note : L+0.1/-0.2 for E40, E46 and F45 PART NUMBERING SYSTEM 1 2 3 4 A PXF 5 6 7 8 9 MARKING 10 A RA 11 12 13 14 M 15 16 17 D 5 5 5 6.3 6.3 6.3 8 8 L 3.9 4.5 5.8 4.4 5.8 7.7 6.7 7.7 A 5.3 5.3 5.3 6.6 6.6 6.6 8.3 8.3 B 5.3 5.3 5.3 6.6 6.6 6.6 8.3 8.3 C 5.9 5.9 5.9 7.2 7.2 7.2 9.0 9.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.4 1.4 1.9 1.9 1.9 3.1 3.1 F69A 390 2.5V 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 1,000F:102) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 34 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXFSeries Upgrade! - STANDARD RATINGS WV (Vdc) Cap (F) Size code Leakage current (A max./after 2min.) 2 680 220 220 330 330 390 390 470 560 560 560 680 1,000 330 390 470 560 680 150 150 150 220 220 270 330 330 330 390 470 560 120 270 F61 E40 E46 E61 F45 E61 F61 F80 F61 F80 H70 H70 H80 F61 F80 H70 H70 H80 E40 E46 E61 E61 F61 F80 F61 F80 H70 H70 H80 H80 E61 F61 700 700 700 700 700 700 292 352 700 420 420 510 750 396 468 564 672 816 700 700 700 700 415 510 700 623 623 737 888 1,050 240 540 2.5 4 6.3 10 ESR Rated ripple current (m max./20, 100k to 300kHz) (mArms/105, 100kHz) 12 12 25 10 12 10 10 9 10 9 10 10 9 10 9 10 10 9 20 25 12 12 10 9 10 9 10 10 9 9 22 20 3,500 3,300 2,100 3,900 3,500 3,900 3,900 4,200 3,900 4,200 4,500 4,500 4,500 3,900 4,200 4,500 4,500 4,500 2,700 2,100 3,500 3,500 3,900 4,200 3,900 4,200 4,500 4,500 4,500 4,500 2,600 2,800 Part No. APXF2R0ARA681MF61G APXF2R5ARA221ME40G APXF2R5ARA221ME46G APXF2R5ARA331ME61G APXF2R5ARA331MF45G APXF2R5ARA391ME61G APXF2R5ARA391MF61G APXF2R5ARA471MF80G APXF2R5ARA561MF61G APXF2R5ARA561MF80G APXF2R5ARA561MH70G APXF2R5ARA681MH70G APXF2R5ARA102MH80G APXF4R0ARA331MF61G APXF4R0ARA391MF80G APXF4R0ARA471MH70G APXF4R0ARA561MH70G APXF4R0ARA681MH80G APXF6R3ARA151ME40G APXF6R3ARA151ME46G APXF6R3ARA151ME61G APXF6R3ARA221ME61G APXF6R3ARA221MF61G APXF6R3ARA271MF80G APXF6R3ARA331MF61G APXF6R3ARA331MF80G APXF6R3ARA331MH70G APXF6R3ARA391MH70G APXF6R3ARA471MH80G APXF6R3ARA561MH80G APXF100ARA121ME61G APXF100ARA271MF61G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 35 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXE TM NPCAP Surface Mount - Series PXF P34 Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700F Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free Lower ESR PXE Lower ESR PXA P38 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105 2.5 to 16Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Code : A Size Code E61 F61 F80 H70 H80 HA0 HC0 J80 JA0 JC0 P 0.3max. L0.3 (Note) C0.2 W B0.2 D0.5 Terminal MARKING A0.2 (Note) L0.5 for HA0, HC0, JA0, JC0 D 5 6.3 6.3 8 8 8 8 10 10 10 A B C L 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 7.7 8.3 8.3 9.0 10.0 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 10.0 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 3.1 3.1 4.5 4.5 4.5 EX) 2.5V390F E49A 390 2.5V PART NUMBERING SYSTEM 1 2 3 4 A PXE 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 36 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXESeries - STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (F) Size code 180 390 470 560 560 680 820 820 1,000 1,200 1,500 1,500 2,200 2,700 100 150 270 330 390 470 560 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 100 120 220 270 330 330 390 470 820 820 820 1,200 1,500 1,500 47 56 68 120 150 220 270 330 390 470 680 33 39 68 82 100 100 120 150 180 220 220 330 E61 F61 F80 F80 H70 H70 H80 HC0 H80 J80 HA0 HC0 JA0 JC0 E61 E61 F61 F61 F80 H70 H70 H80 HA0 J80 HC0 JA0 JA0 JA0 JC0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HC0 J80 JA0 JA0 JC0 E61 E61 E61 F61 F80 H70 H70 H80 HA0 J80 JA0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HA0 J80 JA0 Leakage current (A max./after 2min.) 90.0 195 235 280 280 340 410 410 500 600 750 750 1,100 1,350 80.0 120 216 264 312 376 448 544 800 800 960 960 1,200 1,440 1,440 126 151 277 340 415 415 491 592 1,030 1,030 1,030 1,510 1,890 1,890 94.0 112 136 240 300 440 540 660 780 940 1,360 105 124 217 262 320 320 384 480 576 704 704 1,050 ESR Rated ripple current (m max./20, 100k to 300kHz) (mArms/105, 100kHz) 21 15 13 13 13 13 12 9 12 13 10 9 10 9 22 22 15 15 14 14 14 13 10 14 9 10 10 10 9 24 24 15 14 14 14 14 13 12 10 14 12 12 10 28 28 28 25 21 21 21 19 17 19 13 35 35 28 24 24 24 24 22 18 18 22 16 2,670 3,160 3,600 3,600 4,100 4,100 4,260 5,400 4,260 4,450 5,220 5,400 5,500 5,600 2,610 2,610 3,160 3,160 3,470 3,950 3,950 3,950 5,220 4,300 5,400 5,500 5,500 5,500 5,600 2,500 2,500 3,160 3,470 3,470 3,950 3,950 3,950 4,770 5,150 4,300 5,025 5,025 5,500 2,310 2,310 2,310 2,530 2,880 3,220 3,220 3,390 4,000 3,800 4,820 2,070 2,070 2,390 2,700 2,700 3,010 3,010 3,150 3,890 3,890 3,450 4,350 Part No. APXE2R5ARA181ME61G APXE2R5ARA391MF61G APXE2R5ARA471MF80G APXE2R5ARA561MF80G APXE2R5ARA561MH70G APXE2R5ARA681MH70G APXE2R5ARA821MH80G APXE2R5ARA821MHC0G APXE2R5ARA102MH80G APXE2R5ARA122MJ80G APXE2R5ARA152MHA0G APXE2R5ARA152MHC0G APXE2R5ARA222MJA0G APXE2R5ARA272MJC0G APXE4R0ARA101ME61G APXE4R0ARA151ME61G APXE4R0ARA271MF61G APXE4R0ARA331MF61G APXE4R0ARA391MF80G APXE4R0ARA471MH70G APXE4R0ARA561MH70G APXE4R0ARA681MH80G APXE4R0ARA102MHA0G APXE4R0ARA102MJ80G APXE4R0ARA122MHC0G APXE4R0ARA122MJA0G APXE4R0ARA152MJA0G APXE4R0ARA182MJA0G APXE4R0ARA182MJC0G APXE6R3ARA101ME61G APXE6R3ARA121ME61G APXE6R3ARA221MF61G APXE6R3ARA271MF80G APXE6R3ARA331MF80G APXE6R3ARA331MH70G APXE6R3ARA391MH70G APXE6R3ARA471MH80G APXE6R3ARA821MHA0G APXE6R3ARA821MHC0G APXE6R3ARA821MJ80G APXE6R3ARA122MJA0G APXE6R3ARA152MJA0G APXE6R3ARA152MJC0G APXE100ARA470ME61G APXE100ARA560ME61G APXE100ARA680ME61G APXE100ARA121MF61G APXE100ARA151MF80G APXE100ARA221MH70G APXE100ARA271MH70G APXE100ARA331MH80G APXE100ARA391MHA0G APXE100ARA471MJ80G APXE100ARA681MJA0G APXE160ARA330ME61G APXE160ARA390ME61G APXE160ARA680MF61G APXE160ARA820MF80G APXE160ARA101MF80G APXE160ARA101MH70G APXE160ARA121MH70G APXE160ARA151MH80G APXE160ARA181MHA0G APXE160ARA221MHA0G APXE160ARA221MJ80G APXE160ARA331MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 37 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXA TM NPCAP Surface Mount - Series PXE P36 Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte Rated voltage range : 2.5 to 25Vdc, case size range : 4x5.2L to10x12.2L Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free Lower ESR PXA SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105 2.5 to 25Vdc 20% (M) Rated voltagex1.15 (Rated voltage 2.5 to 20Vdc, 25Vdc) / Rated voltagex1.00 (Rated voltage 23Vdc) Shall not exceed values shown in STANDARD RATINGS. 0.12 max. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours(F45 : 500 hours). Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Code : A Size code D55 E60 F45 F55 F60 H70 HC0 J80 JC0 W P C0.2 B0.2 D0.5 Terminal MARKING 0.3max. A0.2 L0.3 (Note) Note : L+0.1/-0.2 for F45 L0.5 for HC0 and JC0 D 4 5 6.3 6.3 6.3 8 8 10 10 L A B C 5.2 4.3 4.3 5.1 5.7 5.3 5.3 5.9 4.4 6.6 6.6 7.2 5.2 6.6 6.6 7.2 5.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 1.9 3.1 3.1 4.5 4.5 EX) 16V39F A15L 39 16V PART NUMBERING SYSTEM 1 2 3 4 A PXA 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 38 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXASeries - STANDARD RATINGS WV Cap (Vdc) (F) Leakage Rated ripple ESR current Size current (A max./ (m max./ 20, code (mArms/105, 100k to 300kHz) after 100kHz) 2 min.) 220 220 560 2.5 680 1,000 1,500 33 100 100 120 150 150 150 4 220 330 470 560 680 820 1,200 22 47 68 82 82 82 100 100 100 6.3 100 120 150 220 330 390 470 470 680 820 F55 F60 H70 HC0 J80 JC0 D55 F55 F60 F45 E60 F55 F60 H70 H70 J80 HC0 J80 JC0 JC0 D55 E60 F60 F45 F55 F60 E60 F45 F55 F60 F60 H70 H70 J80 HC0 HC0 J80 JC0 JC0 110 110 280 340 500 750 66.0 80.0 80.0 240 120 120 120 176 264 376 448 544 656 960 69.0 59.2 85.6 267 103 103 126 315 126 126 151 189 277 416 491 592 592 857 1,030 25 25 23 12 19 10 200 26 26 38 30 26 26 25 25 20 12 20 10 10 200 35 27 40 27 27 35 40 27 27 27 25 25 20 12 12 20 10 10 2,500 2,500 3,100 4,770 4,240 5,500 740 2,450 2,450 1,710 1,490 2,450 2,450 3,020 3,020 4,130 4,770 4,130 5,500 5,500 740 1,380 2,400 1,670 2,400 2,400 1,380 1,670 2,400 2,400 2,400 3,020 3,020 4,130 4,770 4,770 4,130 5,500 5,500 WV Cap (Vdc) (F) Part No. APXA2R5ARA221MF55G APXA2R5ARA221MF60G APXA2R5ARA561MH70G APXA2R5ARA681MHC0G APXA2R5ARA102MJ80G APXA2R5ARA152MJC0G APXA4R0ARA330MD55G APXA4R0ARA101MF55G APXA4R0ARA101MF60G APXA4R0ARA121MF45G APXA4R0ARA151ME60G APXA4R0ARA151MF55G APXA4R0ARA151MF60G APXA4R0ARA221MH70G APXA4R0ARA331MH70G APXA4R0ARA471MJ80G APXA4R0ARA561MHC0G APXA4R0ARA681MJ80G APXA4R0ARA821MJC0G APXA4R0ARA122MJC0G APXA6R3ARA220MD55G APXA6R3ARA470ME60G APXA6R3ARA680MF60G APXA6R3ARA820MF45G APXA6R3ARA820MF55G APXA6R3ARA820MF60G APXA6R3ARA101ME60G APXA6R3ARA101MF45G APXA6R3ARA101MF55G APXA6R3ARA101MF60G APXA6R3ARA121MF60G APXA6R3ARA151MH70G APXA6R3ARA221MH70G APXA6R3ARA331MJ80G APXA6R3ARA391MHC0G APXA6R3ARA471MHC0G APXA6R3ARA471MJ80G APXA6R3ARA681MJC0G APXA6R3ARA821MJC0G 10 16 20 23 25 4.7 6.8 10 15 33 47 47 47 56 56 120 150 270 270 330 330 470 560 3.3 22 22 33 39 39 82 150 180 180 220 330 15 22 22 39 47 82 150 15 10 22 39 Leakage Rated ripple ESR current Size current (A max./ (m max./ 20, code (mArms/105, 100k to 300kHz) after 100kHz) 2 min.) D55 D55 D55 D55 E60 E60 F45 F60 F55 F60 H70 H70 HC0 J80 HC0 J80 JC0 JC0 D55 E60 F45 F60 F55 F60 H70 J80 HC0 J80 JC0 JC0 F45 F55 F60 H70 H70 J80 JC0 F45 F60 H70 J80 24.0 34.0 50.0 75.0 66.0 94.0 235 94.0 112 112 240 300 540 540 660 660 940 1,120 26.0 70.4 176 106 125 125 262 480 576 576 704 1,050 150 88.0 88.0 156 188 328 600 172 125 275 488 240 240 220 200 40 40 41 31 31 31 27 27 14 24 14 24 12 12 260 45 45 37 37 37 30 26 16 26 14 14 57 50 50 45 45 40 20 57 65 50 45 670 670 700 740 1,270 1,270 1,560 2,250 2,250 2,250 2,800 2,800 4,420 3,770 4,420 3,770 5,300 5,300 660 1,210 1,490 2,050 2,050 2,050 2,700 3,430 4,360 3,430 5,050 5,050 1,300 1,650 1,650 2,000 2,000 2,500 4,320 1,300 1,500 1,800 2,100 Part No. APXA100ARA4R7MD55G APXA100ARA6R8MD55G APXA100ARA100MD55G APXA100ARA150MD55G APXA100ARA330ME60G APXA100ARA470ME60G APXA100ARA470MF45G APXA100ARA470MF60G APXA100ARA560MF55G APXA100ARA560MF60G APXA100ARA121MH70G APXA100ARA151MH70G APXA100ARA271MHC0G APXA100ARA271MJ80G APXA100ARA331MHC0G APXA100ARA331MJ80G APXA100ARA471MJC0G APXA100ARA561MJC0G APXA160ARA3R3MD55G APXA160ARA220ME60G APXA160ARA220MF45G APXA160ARA330MF60G APXA160ARA390MF55G APXA160ARA390MF60G APXA160ARA820MH70G APXA160ARA151MJ80G APXA160ARA181MHC0G APXA160ARA181MJ80G APXA160ARA221MJC0G APXA160ARA331MJC0G APXA200ARA150MF45G APXA200ARA220MF55G APXA200ARA220MF60G APXA200ARA390MH70G APXA200ARA470MH70G APXA200ARA820MJ80G APXA200ARA151MJC0G APXA230ARA150MF45G APXA250ARA100MF60G APXA250ARA220MH70G APXA250ARA390MJ80G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 39 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXD TM NPCAP Surface Mount - Series Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. For automobile modules and other high temperature applications Endurance : 125 2,000 hours Rated voltage range : 2.5 to 10Vdc, Capacitance range : 47 to 470F Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXD Longer life PXH P42 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +125 2.5 to 10Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 125) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 125. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 125) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 125. DIMENSIONS [mm] EX) 10V330F Code : A P C0.2 W B0.2 D0.5 Terminal MARKING 0.3max. Size code E61 F61 H70 J80 A0.2 D 5 6.3 8 10 L 5.8 5.8 6.7 7.7 A B C 5.3 5.3 5.9 6.6 6.6 7.2 8.3 8.3 9.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 3.1 4.5 D22A 330 10V L0.3 PART NUMBERING SYSTEM 1 2 3 4 A PXD 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 40 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXDSeries - STANDARD RATINGS WV (Vdc) 2.5 6.3 10 *1 Cap (F) Size code 120 220 56 100 220 470 47 56 150 330 E61 F61 E61 F61 H70 J80 E61 F61 H70 J80 Leakage current ESR (A max./after 2min.) (m max./20, 100k to 300kHz) 60.0 110 70.5 126 277 592 94.0 112 300 660 40 30 45 35 30 25 50 40 35 25 Rated ripple current (mArms/100kHz) -55Tx+105*1 1,450 2,500 1,380 2,400 3,020 3,500 1,270 2,250 2,800 3,500 Part No. +105Tx+125*1 650 770 600 720 960 1,100 550 680 880 1,100 APXD2R5ARA121ME61G APXD2R5ARA221MF61G APXD6R3ARA560ME61G APXD6R3ARA101MF61G APXD6R3ARA221MH70G APXD6R3ARA471MJ80G APXD100ARA470ME61G APXD100ARA560MF61G APXD100ARA151MH70G APXD100ARA331MJ80G Tx : Ambient temperature Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 41 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXH TM NPCAP Surface Mount - Series Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. Suitable for DC-DC converters, voltage regulators and decoupling applications. Endurance : 125 1,000 hours Rated voltage range : 2.5 to 20Vdc, Capacitance range : 22 to 1,000F Case size range :6.3x5.7L to 10x7.7L Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PXH Higher temperature PXA P38 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +125 2.5 to 20Vdc 20% (M) Rated voltagex1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 125) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 125. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 125) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 125. DIMENSIONS [mm] EX) 20V22F Code : A P C0.2 W B0.2 D0.5 Terminal MARKING 0.3max. Size code F60 H70 J80 D 6.3 8 10 L 5.7 6.7 7.7 A B C 6.6 6.6 7.2 8.3 8.3 9.0 10.3 10.3 11.0 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 3.1 4.5 H39F 22 20V A0.2 L0.3 PART NUMBERING SYSTEM 1 2 3 4 A PXH 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22F:220,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 42 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXHSeries - STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 20 *1 Cap (F) 220 560 1,000 150 220 680 82 100 150 220 470 56 120 150 330 39 82 150 180 22 47 82 Size code Leakage current ESR (A max./after 2min.) (m max./20, 100k to 300kHz) F60 H70 J80 F60 H70 J80 F60 F60 H70 H70 J80 F60 H70 H70 J80 F60 H70 J80 J80 F60 H70 J80 110 280 500 120 176 544 103 126 189 277 592 112 240 300 660 125 262 480 576 88.0 188 328 35 30 25 35 30 25 40 40 30 30 25 45 35 35 30 50 40 35 35 60 45 45 Rated ripple current (mArms/100kHz) -55Tx+105*1 2,500 3,100 3,700 2,450 3,020 3,700 2,400 2,400 3,020 3,020 3,700 2,250 2,800 2,800 3,700 2,050 2,700 3,020 3,020 1,650 2,000 2,400 Part No. +105Tx+125*1 770 960 1,100 770 960 1,100 720 720 960 960 1,100 680 880 880 1,010 650 830 930 930 590 780 820 APXH2R5ARA221MF60G APXH2R5ARA561MH70G APXH2R5ARA102MJ80G APXH4R0ARA151MF60G APXH4R0ARA221MH70G APXH4R0ARA681MJ80G APXH6R3ARA820MF60G APXH6R3ARA101MF60G APXH6R3ARA151MH70G APXH6R3ARA221MH70G APXH6R3ARA471MJ80G APXH100ARA560MF60G APXH100ARA121MH70G APXH100ARA151MH70G APXH100ARA331MJ80G APXH160ARA390MF60G APXH160ARA820MH70G APXH160ARA151MJ80G APXH160ARA181MJ80G APXH200ARA220MF60G APXH200ARA470MH70G APXH200ARA820MJ80G Tx : Ambient temperature Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 43 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSG - Radial Lead Upgrade! Series Super low ESR, high ripple current capability Endurance: 15,000 to 20,000 hours at 105 Rated voltage : 16 to 25Vdc RoHS Compliant Halogen Free PSG Downsized PSF P48 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Capacitance Tolerance Surge Voltage Leakage Current -55 to +105 16 to 25Vdc 20% (M) Rated voltage(V)x1.15 I=0.2CV or 500A, whichever is greater Where, I : Leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) *Note Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.12 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours (20, 25V : 15,000 hours) at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Terminal Code : E F05,F08,H06,H08 D' d F0.5 Coated Case L' 15min. Size code F05 F08 H06 H08 D 6.3 d 0.45 F 2.5 D' L' L+1.0max. (Note1) HB5,H16,H20,JB5,J16,J20 H20 JB5 0.6 3.5 D+0.5max. J16 10.0 J20 5.0 L+1.5max. F0.5 MARKING EX) 16V150F D' d H16 Note1 : L+1.2 max. for 16V270F (Rated ripple current 5,080mArms). 4min. Coated Case HB5 8.0 G 6D6 150 16V L' 15min. 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 44 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSGSeries Upgrade! - PART NUMBERING SYSTEM 1 2 3 4 A PSG 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 S (Note2) : PSG series, 16V270F (Rated ripple current 5,080mArms) have supplement code "J". Terminal and terminal plating are the same as all other inPSG series. Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150F:151,1,000F:102) Lead forming*Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 16 20 25 Cap (F) Case size DxL (mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 150 270 270 270 470 560 560 820 820 1,000 1,000 1,200 1,500 1,800 2,200 120 180 330 390 680 56 82 180 180 220 330 390 6.3x5 6.3 x8 6.3x8 8x6 8x8 8x11.5 8x11.5 8x 16 10x11.5 8 x20 10x 11.5 8 x20 10x 16 10x 20 10x 20 6.3x5 6.3x 8 8x8 8 x 11.5 10x 11.5 6.3x5 6.3 x 8 8x8 8x11.5 8x 11.5 10x11.5 10x 11.5 20 10 15 22 16 8 14 8 12 8 12 8 8 8 8 20 18 17 14 12 30 28 18 16 16 14 14 3,200 5,080 3,800 3,300 4,000 6,100 4,970 7,000 5,400 7,500 5,400 7,500 7,700 8,100 8,100 3,200 3,460 3,880 4,970 5,400 2,600 2,780 3,770 4,650 4,650 5,000 5,000 APSG160E151MF05S APSG160E271MF08J APSG160E271MF08S APSG160E271MH06S APSG160E471MH08S APSG160E561MHB5J APSG160E561MHB5S APSG160E821MH16S APSG160E821MJB5S APSG160E102MH20S APSG160E102MJB5S APSG160E122MH20S APSG160E152MJ16S APSG160E182MJ20S APSG160E222MJ20S APSG200E121MF05S APSG200E181MF08S APSG200E331MH08S APSG200E391MHB5S APSG200E681MJB5S APSG250E560MF05S APSG250E820MF08S APSG250E181MH08S APSG250E181MHB5S APSG250E221MHB5S APSG250E331MJB5S APSG250E391MJB5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 45 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSK - Series PSK Super low ESR, high ripple current capability Downsized from PSE series (6.3x8L to 5x8L) Long life (20,000 hours at 105) Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free Downsized PSE P50 SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current*Note Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate Characteristics -55 to +105 2.5 to 6.3 Vdc 20% (M) Rated voltage(V)x1.15 500A max. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.10 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR The initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR The initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Code : E F0.5 Terminal D' d Coated Case L' 15min. 4min. Size code E08 D 5.0 d 0.5(Note2) F 2.0 D' D+0.5max. L' L+1.0max. Note2 : 0.45 for rated vollage 2.5V MARKING EX) 2.5V560F K6D6 560 2.5V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 46 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSKSeries - PART NUMBERING SYSTEM 1 2 3 4 A PSK 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E AA 5 6 1 M E 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560F:561) Lead forming.Taping code Terminal code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2.5 4 6.3 Cap (F) Case size DxL (mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 220 330 470 560 330 270 330 5 x8 5x 8 5x 8 5x 8 5x8 5 x8 5x8 7 7 7 7 8 10 8 4,350 4,350 4,350 4,350 4,050 3,700 4,050 APSK2R5E221ME08S APSK2R5E331ME08S APSK2R5E471ME08S APSK2R5E561ME08S APSK4R0E331ME08S APSK6R3E271ME08S APSK6R3E331ME08S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 47 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSF - Series PSF Super low ESR, high ripple current capability ESR 5mmax. (2 to 4Vdc) Longer life (20,000 hours at 105) Rated voltage range : 2 to 16Vdc Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free Lower ESR PSE P50 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note -55 to +105 2 to 16Vdc 20%(M) Rated voltage(V)x1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) Endurance 0.10 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR 2 to 6.3Vdc : The initial specified value 16Vdc : 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR 2 to 6.3Vdc : The initial specified value 16Vdc : 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) Bias Humidity Test Surge Voltage Test Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Code : E Coated Case Size code F05 H08 HB5 JB5 F08 FA5 D 8.0 10.0 6.3 d 0.6 0.45 0.6 0.5 F 3.5 5.0 2.5 D' D+0.5max. L' L+1.0max. (Note1) L+0.3max. L+1.0max. L+1.5max. D' d F05, F08, H08 F0.5 Terminal Note1 : L+1.2 max. for 6.3V820F 4min. F0.5 Coated Case D' d FA5, HB5, JB5 15min. F0.5 L' (FA5) L' 15min. (HB5, JB5) MARKING EX) 2.5V560F F 6D6 560 2.5V 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 48 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSFSeries - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS F 2 R 5 E AA 5 6 1 M F 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560F:561) Lead forming*Taping code Terminal code Voltage code (ex. 2.5V:2R5, 16V:160) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2 2.5 4 6.3 16 Cap (F) 1,000 330 470 560 820 1,200 1,600 470 560 820 100 100 270 270 330 470 470 Case size DxL(mm) Leakage current (A max./after 2min.) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) 6.3x8 6.3x8 6.3x8 6.3x8 6.3x8 6.3 x8 8 x8 6.3x8 6.3x8 6.3x8 6.3x 5 6.3x 10.5 8x 8 8x 11.5 8x 8 8x 11.5 10x 11.5 500 500 500 500 500 1,200 800 500 500 1,030 500 500 864 864 1,050 1,500 1,500 5 5 5 5 5 5 5 5 5 8 24 25 10 11 13 11 10 5,900 5,900 5,900 5,900 5,900 5,900 6,100 5,900 5,900 4,700 2,490 2,820 5,000 5,080 4,700 5,400 6,100 Part No. APSF2R0E102MF08S APSF2R5E331MF08S APSF2R5E471MF08S APSF2R5E561MF08S APSF2R5E821MF08S APSF2R5E122MF08S APSF2R5E162MH08S APSF4R0E471MF08S APSF4R0E561MF08S APSF6R3E821MF08S APSF160E101MF05S APSF160E101MFA5S APSF160E271MH08S APSF160E271MHB5S APSF160E331MH08S APSF160E471MHB5S APSF160E471MJB5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 49 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSE - Series Radial Lead PSE Super low ESR, high ripple current capability Downsized from PSC series (8x8L to 6.3x8L) Endurance is longer than PSC series (20,000 hours at 105) Rated voltage range : 2.5 to 6.3Vdc Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free Longer life Downsized PSC P52 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate -55 to +105 2.5 to 6.3Vdc 20% (M) Rated voltage(V)x1.15 I=0.2CV or 500A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) 0.10 max. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR The initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) The initial specified value ESR The initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Terminal Code : E F0.5 Coated Case D' d F08 L' 15min. F08 6.3 H06 8.0 0.6 2.5 3.5 D+0.5max. L+1.5max. MARKING EX) 2.5V820F E 6D6 820 2.5V 4min. F0.5 Coated Case D' d H06 Size code D d F D' L' L' 15min. 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 50 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSESeries - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSE 2 R 5 E AA 5 6 1 M F 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820F:821) Lead forming*Taping code Terminal code Voltage code (ex. 2.5V:2R5, 4V:4R0, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2.5 4 6.3 Cap (F) 680 820 560 470 560 Case size DxL(mm) ESR (m max./20, 100k to 300kHz) 8 x6 6.3x 8 6.3x8 6.3 x8 6.3x 8 8 7 7 8 8 Rated ripple current (mArms/105, 100kHz) Part No. 4,900 5,000 5,000 4,700 4,700 APSE2R5E681MH06S APSE2R5E821MF08S APSE4R0E561MF08S APSE6R3E471MF08S APSE6R3E561MF08S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 51 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSC - Series Super low ESR, high ripple current capability Lower profile than PSA (8x8L to 10x12.5L) Rated voltage range : 2.5 to 16Vdc Nominal capacitance range : 270 to 2,700F Endurance : 15,000 hours at 105 Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards Added 2.5V 820F (ESR 5m max.) Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PSC Low profile Lower ESR PSA P54 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate -55 to +105 2.5 to 16Vdc 20% (M) Rated voltagex1.15 I=0.2CV or 500A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) (at 20, 120Hz) (at 105) (at 20 after 2 minutes) 0.10 max. (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] Terminal MARKING Code : E d D' L' 15min. EX) 2.5V820F F0.5 Coated Case 4min. Size code H08 D 8.0 d 0.6 F 3.5 D' L' L+1.0max. HB5 JB5 8.0 10.0 0.8(Note1) 0.8(Note1) 3.5 5.0 D+0.5max. L+1.5max. JC5 10.0 0.6 5.0 C 3D6 820 2.5V Note1 : 0.6 for rated volt 16V. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 52 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSCSeries - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSC AAA E AA AAA M AAA S Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 1000F:102) Lead forming*Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category (Note2) PSC series, 2.5V820F(ESR 5m max.) has supplement code "J". Can case, terminal and terminal plating are the same as all others in PSC series. Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (F) 560 820 820 1,000 1,000 1,500 2,700 560 680 1,000 470 560 820 1,500 390 680 270 330 330 470 Case size DxL(mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 7 5 7 7 7 7 8 7 7 6 8 8 7 10 9 7 11 10 10 10 6,100 6,100 6,100 6,100 6,100 6,100 5,560 6,100 6,100 6,640 5,700 5,700 6,640 5,560 5,650 6,100 5,080 6,100 6,100 6,100 APSC2R5E561MH08S APSC2R5E821MH08J APSC2R5E821MH08S APSC2R5E102MH08S APSC2R5E102MHB5S APSC2R5E152MHB5S APSC2R5E272MJB5S APSC4R0E561MH08S APSC4R0E681MHB5S APSC4R0E102MJB5S APSC6R3E471MH08S APSC6R3E561MH08S APSC6R3E821MJB5S APSC6R3E152MJB5S APSC100E391MHB5S APSC100E681MJB5S APSC160E271MHB5S APSC160E331MJB5S APSC160E331MJC5S APSC160E471MJB5S 8 x8 8x8 8x8 8x8 8x 11.5 8 x 11.5 10 x11.5 8 x8 8x 11.5 10x11.5 8 x8 8x8 10x 11.5 10x11.5 8 x 11.5 10x11.5 8x 11.5 10x 11.5 10x 12.5 10x 11.5 : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 53 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSA - Series Radial Lead PSC P52 Low profile Lower ESR Super low ESR, high temperature resistance and high ripple current capability Rated voltage range : 2.5 to 16Vdc Endurance : 15,000 hours at 105 Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PSA Lower ESR PS P56 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate -55 to +105 2.5 to 16Vdc 20% (M) Rated voltagex1.15 I=0.2CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) 0.08 max. (FA5 size : 0.12max.) (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor (R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] MARKING Code : E EX) 4V560F A 292 560 4V D' d F0.5 Coated Case F0.5 Terminal (FA5) L' 15min. 4min. Size code D d F D' L' (HB5, JB5) FA5 6.3 0.5 2.5 HB5 8.0 JB5 10.0 0.8 3.5 5.0 D+0.5max L+0.3max L+1.5max Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 54 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSASeries - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 1 000F:102) Lead forming*Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (F) 390 680 820 1,000 1,500 270 390 560 820 220 330 390 470 680 47 68 100 150 270 470 100 Case size DxL(mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 6.3 x10.5 8x 11.5 8x 11.5 10x11.5 10x11.5 6.3x10.5 6.3x 10.5 8x 11.5 10x 11.5 6.3 x10.5 6.3x 10.5 8x 11.5 8x 11.5 10x 11.5 6.3x10.5 6.3x10.5 6.3x 10.5 6.3x 10.5 8 x 11.5 10x 11.5 6.3x 10.5 20 7 7 6 7 20 24 7 6 20 28 8 7 7 25 25 25 25 9 8 25 3,160 5,580 5,580 5,860 5,860 3,160 3,300 5,580 5,860 3,160 3,190 5,080 5,700 5,860 2,820 2,820 2,820 2,820 4,710 5,650 2,820 APSA2R5E391MFA5S APSA2R5E681MHB5S APSA2R5E821MHB5S APSA2R5E102MJB5S APSA2R5E152MJB5S APSA4R0E271MFA5S APSA4R0E391MFA5S APSA4R0E561MHB5S APSA4R0E821MJB5S APSA6R3E221MFA5S APSA6R3E331MFA5S APSA6R3E391MHB5S APSA6R3E471MHB5S APSA6R3E681MJB5S APSA100E470MFA5S APSA100E680MFA5S APSA100E101MFA5S APSA100E151MFA5S APSA100E271MHB5S APSA100E471MJB5S APSA160E101MFA5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 55 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PS - Series Super low ESR, high temperature resistance Large capacitance & Improved high ripple current capability Rated voltage range : 2.5 to 35Vdc Endurance : 15,000 hours at 105 Suitable for DC-DC converters, voltage regulators and decoupling applications For computer motherboards Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Halogen Free PSA P54 Lower ESR PS SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate -55 to +105 2.5 to 35Vdc 20% (M) Rated voltagex1.15 I=0.2CV (Rated voltage 2.5 to 25Vdc) / I=0.5CV (Rated voltage 35Vdc) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) 0.12 max. (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor (R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] EX) 4V820F D' Coated Case F0.5 Code : E 0.6 Terminal MARKING L' 15min. 4min. Size code D d F D' L' HB5 8 JC5 10 PS18M 820 4V 0.6 3.5 5.0 D+0.5max L+1.5max. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 56 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSSeries - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS- AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 1 500F:152) Lead forming*Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 20 25 35 Cap (F) 680 820 1,500 560 820 1,000 1,200 390 470 680 820 1,000 270 330 470 560 100 180 270 330 100 150 68 100 18 33 Case size DxL(mm) ESR (m max./20, 100k to 300kHz) Rated ripple current (mArms/105, 100kHz) Part No. 10 10 8 10 8 8 8 12 12 10 10 10 14 14 12 12 16 16 14 14 24 20 24 20 34 30 5,230 5,230 5,500 5,230 5,500 5,500 5,500 4,770 4,770 5,500 5,500 5,500 4,420 4,420 5,300 5,300 4,360 4,360 5,050 5,050 3,320 4,320 3,320 4,320 2,830 3,270 APS-2R5E681MHB5S APS-2R5E821MHB5S APS-2R5E152MJC5S APS-4R0E561MHB5S APS-4R0E821MJC5S APS-4R0E102MJC5S APS-4R0E122MJC5S APS-6R3E391MHB5S APS-6R3E471MHB5S APS-6R3E681MJC5S APS-6R3E821MJC5S APS-6R3E102MJC5S APS-100E271MHB5S APS-100E331MHB5S APS-100E471MJC5S APS-100E561MJC5S APS-160E101MHB5S APS-160E181MHB5S APS-160E271MJC5S APS-160E331MJC5S APS-200E101MHB5S APS-200E151MJC5S APS-250E680MHB5S APS-250E101MJC5S APS-350E180MHB5S APS-350E330MJC5S 8 x11.5 8x 11.5 10 x12.5 8 x11.5 10x 12.5 10 x12.5 10 x12.5 8 x 11.5 8x 11.5 10x 12.5 10x 12.5 10 x12.5 8x11.5 8x 11.5 10x 12.5 10x 12.5 8x 11.5 8x 11.5 10x 12.5 10x 12.5 8x 11.5 10x 12.5 8x 11.5 10x 12.5 8x 11.5 10x12.5 : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 57 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS RECOMMENDED SOLDERING CONDITIONS FOR NPCAPTM SURFACE MOUNT TYPE The following conditions are recommended for air or infrared reflow soldering PXG/PXK/PXS/PXF/PXE/PXA/PXD/PXH series onto a glass epoxy circuit board of 90x50x0.8mm (with resist) by cream solder. The temperatures shown are the surface temperature values on the top of the can and temperature of capacitor terminal. Reflow should be performed twice or less. Please ensure that the capacitor became cold enough to the room temperature (5 to 35) before the second reflow. Recommended soldering heat conditions Temperature on the top of capacitor and Temperature of capacitor terminal () Peak temperature Peak 230 Voltage range (Vdc) Max. period of time over 230 217 Preheat 2.5 to 16V Max. period of time over 217 20 to 25V Preheat ( 150 to 180 120 sec.max. Time maintained Time maintained Peak temp. Reflow number above 217 above 230 260max. 1-cycle only 250max. 2-cycle allowed 50 sec.max. 40 sec.max. 50 sec.max. (40 sec.max.) 40 sec.max. 40 sec.max. 250max. 1-cycle only (30 sec.max.) (240max.) 30 sec.max. 2-cycle allowed ) : Applies for 20V 82F(J80) and 25V 39F(J80) Time (sec.) Recommended Solder Land on PC Board c b a b Solder land on PC board Size code D55 E40, E46, E60, E61 F45, F46, F55 F60, F61, F80 H70, H80, HA0, HC0 J80, JA0, JC0 a 1.0 1.4 b 2.6 3.0 [mm] c 1.6 1.6 1.9 3.5 1.6 3.1 4.5 4.2 4.4 2.2 2.2 RADIAL LEAD TYPE Recommended soldering heat conditions Preheat 150 120 seconds max. Flow soldering 260+5 max. 10+1 seconds max. PRECAUTIONS FOR USERS Soldering method SMD type have no capability to withstand such dip or wave soldering as totally immersing components into a solder bath. Reflow soldering Mechanical stress Do not grab the capacitors to lift the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Reflow the capacitors within Recommended Reflow Soldering Conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult with us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic-made board needs more heat than a glass epoxy-made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Case leakage current will increase (mA) after the reflow process, the leakage current which rose gradually decreases when voltage is applied. 9.Please consult us about vapor phase soldering (VPS). Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine in resin will penetrate the end seal, reach the element, and damage of the capacitor. Glue The followings are requirements for glue. 1.A low curing temperature over a short period of time 2.Strong adhension and heat resistance after curing 3.Long shelf life 4.No corrosion Others Refer to PRECAUTIONS AND GUIDELINES(Conductive Polymer). Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 38010 and an exposure time of 30.5 seconds. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 58 CAT. No. E1001O Return Group Chart Conductive Polymer Hybrid Aluminum Electrolytic Capacitors 59 Return Group Chart 60 Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) Conductive Polymer Hybrid Aluminum Electrolytic Capacitors (Hereinafter called capacitor) that uses highly conductive polymer electrolytic materials and electrolyte. Please read the following in order to get the most out of your capacitor. For Conductive Polymer Aluminum Solid Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer). For Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Aluminum Electrolytic Capacitors). 1 Device circuits design considerations 1 ) Confirm installation and operating requirements for the capacitors, then use them within the performance limits prescribed in this catalog or product specifications. discharge cycle operations. If capacitors are used in the circuits that repeat a charge and discharge with a large voltage drop or a rapid charge and discharge at short interval cycle, capacitance will decrease and/or the capacitors will be damaged by internal heat generation. Please consult us the capacitors to use for the circuit where rapid charge and discharge is repeated. Please be careful about rush currents. Recommend to install protective circuit. Installation 22) Polarity Capacitors are polarized. Never apply a reverse voltage or AC voltage. Connecting with wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on. To identify the polarity of a3capacitor, see the relevant in theof catalogs or product Precautions duringdiagram operation devices specifications, or the polarity marking on the body of the capacitors. 8 ) Failure mode of capacitors Non-solid aluminum electrolytic capacitors have a limited lifetime which ends in an open circuit failure mode, in general. Depending on the product type and operating conditions, the failure mode may involve in opening of the pressure relief vent. But it may lead to shot circuit mode failure when capacitor is used in the overload more than the guarantee ranges including over voltage and the over current. 3 ) Operating voltage Do not apply an over-voltage that exceeds a rated voltage 4 Maintenance inspections specified for the capacitors. The total peak value of the ripple voltage plus the DC voltage must not exceed the rated voltage of the capacitors. Although capacitors specify a surge voltage that exceeds the full rated voltage, it does not assure long-term use but limited use under specific conditions. 5 Contingencies 9 ) Capacitor insulation The can case of capacitor does not assure electrical insulation. The outer coating on can case is aimed for indication and does not assure function of the electrical insulation. Electrically isolate the outer can case of a capacitor from the negative terminal, the positive terminal and circuit patterns. 4 ) Ripple current Do not apply an over current that exceeds the rated ripple current specified for the capacitors. Excessive ripple current will increase heat production within the capacitors, causing the ca6 Storage pacitors to be damaged as follows: * Shorten lifetime * Open pressure relief vent * Short circuit At the time of low DC bias voltage, reverse voltage may be applied if uses with less than rated ripple current. Please use it as disposal 7 Capacitor far as the reverse voltage is not applied. The rated ripple current is specified along with a specific ripple frequency. Where using the capacitors at any ripple frequency other than the specified frequency, calculate the allowable ripple current by multiplying the rated ripple current by a frequency compensation (Frequency Multiplier) specified for each product About AEC-Q200 8 factor series. 10 ) Operating conditions Do not use/expose capacitors to the following conditions: Direct contact with water, salt water or oil, or high condensation environment. Direct sunlight Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. Ozone, ultraviolet rays or radiation. Extreme vibration or mechanical shock that exceeds limits in the catalogs or product specifications. 11 ) Mounting Capacitors contain paper separators and electric-conductive electrolyte that contains organic solvent as main solvent material, both of which are flammable. If the electrolyte leaks onto a printed circuit board, it can erode the device circuit pattern, may short-circuit the copper traces, smoke and burn. Make sure of designing a PC board as follows: Provide clearance space (2mm minimum) over the pressure relief vent of a capacitor to avoid blocking the correct opening of the pressure relief vent for 10mm case diameter of capacitor. Do not locate any wire or circuit pattern over the pressure relief vent of a capacitor. Avoid locating any heat source components near capacitors or on the opposite side of the PC board under capacitors. Design the solder land on the PC board in accordance with the catalog or the product specification. Do not print any copper trace under the seal (terminal) side of a capacitor. When the electrolyte leaks out, it may occur circuit pattern short-circuit, and tracking or migration. Copper traces should be 1 mm (preferably 2mm or more) spaced apart from the side of the capacitor body. In designing a double-sided PC board, do not locate any through-hole via or unnecessary hole underneath a capacitor. In designing a double-sided PC board, do not print any cir- 5 ) Operating temperature (Category temperature) Do not apply high temperatures that exceed the upper limit of the category temperature range specified for the capacitors. 9 Regarding compliance for EU REACH Regulation Using the capacitors at temperatures higher than the upper limit will considerably shorten the lifetime of the capacitors and make the pressure relief vent open. The temperature, please confirm the temperature of the capacitors which included the ambient temperature of the device, not only the temperature in the device but also radiant heat of the heating element (power Catalogs 10 transistor, resistance) in the apparatus, self heating caused by the ripple current. Additionally, please do not place heating element on the back side of the capacitors. In addition, please use the capacitors within category temperature range because the life of the capacitors are affected by the operating temperature. In other words, lowering ambient temperatures will extend the expected lifetime of the capacitors. 6 ) Lifetime Select the capacitors to meet the service life requirements of device. 7 ) Charging and discharging Do not use capacitors in circuits intended for rapid charge and Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 61 CAT. No. E1001O Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) cuit pattern underneath a capacitor. catalogs or product specifications. Please consult us about vapor phase soldering (VPS). Do not try to reuse the capacitors once assembled. 12 ) Using capacitors for significantly safety-oriented applications 3 ) Handling after soldering Consult us about capacitors for a device application affecting human safety (Aviation and aerospace Nuclear Medical Vehicle) or for any device whose failure will make an impact on society. Note that some products such as photoflash use capacitors which have been designed for specific applications cannot be used for any other application. After soldering the PC board, do not apply the following mechanical stress to the capacitor: Do not tilt, push down or twist the body of the capacitor. Do not grab the body of the capacitor to carry the assembly board. Do not hit anything against the capacitor. When stacking the assembled boards, do not put any of the PC boards or other components against the capacitor. Do not drop the assembled board. 13 ) Others Design device circuits taking into consideration the following conditions: Electrical characteristics of a capacitor depend on the temperature and frequency. In designing the device circuits, consider the change in the characteristics. If using more than one capacitor connected in parallel, dethe device circuits to balance the current flow in individDevice circuits design considerations 1 sign ual capacitors. If using more than one capacitor connected in series, connect shunting resistors in parallel with the individual capacitors to balance the voltage. 2 4 ) Cleaning assembly boards Do not clean capacitors with the following cleaning agents: * Halogenated solvents: cause capacitor failures due to corrosion. * Alkali system solvents: corrode (dissolve) the aluminum can case. * Terpene and petroleum system solvents: deteriorate the rubber seal materials. * Xylene: deteriorates the rubber seal materials as well. * Acetone: erases the markings printed on a capacitor. Where cleaning is necessary, use only solvent resistant type capacitors that have been assured for the cleaning within the specific cleaning conditions prescriber in the catalogs or product specifications. In particular, carefully set up the conditions for ultrasonic cleaning system. Consult us regarding alternative CFCs or other cleaners before use. Where cleaning the capacitors, confirm the following conditions: * Control the contamination (the conductivity, pH, specific gravity, water content, etc.) of the cleaning agents. * After the cleaning, do not leave the capacitors (assembly boards) in an environment of cleaning agent-rich or in a closed container. Sufficiently evaporate the residual cleaning agent from the assembly boards and the capacitors by forced hot air at temperatures less than the upper limit of category temperature range for more than 10 minutes. In general, aluminum electrolytic capacitors are sensitive to contamination of halogen ions (particularly to chlorine ions). Depending on the properties of the electrolyte and rubber seal materials used in a capacitor, the halogen ions lead up to catastrophic failures on the capacitor. Where the inside of a capacitor has been contaminated with more than a certain amount of halogen ions and the capacitor is in use, the corrosion reaction of aluminum occurs. The corrosion causes the capacitor to have a significant increase in leakage current with heat produced, open the pressure relief vent and become open circuit mode failure. Due to global environmental issues (greenhouse effects and other environmental destruction by depletion of the ozone layer), the conventional cleaning solvents of CFC 113, Trichloroethylene and 1,1,1-trichloroethylene were replaced by substitutes. The following are some substitute cleaning agents and allowable cleaning conditions: Installation 1 ) Assembling Do not try to reuse the capacitors once assembled and electrified may have beenoperation spontaneously recharged with Precautions during of devices 3 Capacitors time by a recovery voltage phenomenon. Capacitors may produce recovery voltage higher than aluminum electrolytic capacitors and conductive polymer aluminum solid capacitors. In this case, discharge electricity through approximately 1k before use. Maintenance inspections 4 If capacitors have been stored at any conditions more than 35C and 75%RH for long storage periods of time more than the limits specified in the catalogs or product specifications, they may have high leakage current. In this case, make pre-conditioning by applying the rated voltage through a resistor of approximately 1k. Contingencies 5 Confirm the rated capacitance and voltage of capacitors before installation. Confirm the polarity of capacitors before installation. Do not try to use the capacitors that were dropped to the floor and so forth. Do not deform the can case of a capacitor. 6 Storage Do not apply excessive mechanical force to capacitors more than the limits prescribed in the catalogs or product specifications. Avoid excessive mechanical force while the capacitors are in the process of vacuum-picking, placing and positioning by automatic mounting machines or cutting the lead by automatic insertion machines. Capacitor disposal 7 wires 2 ) Soldering and heat resistance For soldering using a soldering iron, consider the following conditions: Soldering conditions (temperature and time) should be (380 AEC-Q200 8 About 10C, 3 0.5second). Do not touch the body of a capacitor with the hot tip of the soldering iron. For reflow soldering, consider the following conditions: Soldering conditions (preheat, reflow temperature and time) be within the limits prescribed in theRegulation catalogs or Regarding compliance for EU REACH 9 should product specifications. When using the infrared heater and setting its temperatures, adjust the heating levels taking into consideration that the color and materials of a capacitor vary in their infrared absorbance. 10 Catalogs allowable number of reflow passes is specified in the The a) Fatty-alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750H, 750K, 750L and 710M (Kao) Technocare FRW-14, 15, 16 and 17 (Momentive Performance Materials) [Cleaning conditions] Either of immersion or ultrasonic cleaning, for a maximum of 10 minutes and at a maximum liquid temperature of 60 C is acceptable. Make sure that the markings on the capacitor are not rubbed against any other component or the PC board during cleaning. Note that shower cleaning af- Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 62 CAT. No. E1001O Installation 2 Chart Return Group PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) 1 3 fects the markings on the capacitor. pounds and ammonium. Extreme vibration or mechanical shock that exceeds the limits in the catalogs or product specifications. b) Alternative CFCs AK225AES (Asahi Glass) [Cleaning conditions] Solvent resistant type capacitors, which were originally developed to intend to resist Freon TE or Freon TES, are also capable of withstanding any one of immersion, ultrasonic or vapor cleaning, for a maximum of 5 minutes. However, this type of cleaning agent is not recommended to use, as the cleaning materials may be banned in near future in view of global environmental issues 2 4 Installation Maintenance inspections (1) For industrial use capacitors, make periodic inspections of the capacitors. Before the inspections, turn off the power supply of the device and discharge the electricity of the capacitors. Where checking it by a volt-ohm meter, confirm Precautions duringDo operation of devicesstress to 3 polarity beforehand. not apply mechanical Contingencies 5 the terminals of the capacitors during inspection. Device circuits design considerations 1 the (2) Characteristics to be inspected Significant damage in appearance: vent opening, electrolyte leakage, etc. Electrical characteristics: leakage current, capacitance, tan inspections 4 Storage 6 Maintenance and other characteristics prescribed in the catalogs or product specifications If finding anything abnormal on the Installation 2 characteristics above, check the specifications of the capacitor and take appropriate actions such as replacement. c) IPA (Isopropyl Alcohol) Immersion cleaning with a maximum flux concentration of 2 wt% is acceptable. 5 ) Adhesives and coating materials Do not use any adhesive or coating materials containing halogenated solvents. Make sure of the following conditions before applying adhesive or coating materials to a capacitor, No flux residue nor stain is left between the rubber seal of a capacitor and PC board. Dry the capacitor to remove residual cleaning agents before applying adhesive and coating materials. Do not cover up the entire surface of the rubber seal of the capacitor with adhesives or coating materials. Consult us Heating and curing conditions for adhesives and coating materials. Covering up the entire surface of the rubber seal with resin mold materials will obstruct the normal diffusion of internal hydrogen gas from a capacitor and result in serious failures. Also, where the adhesive and coating materials contain a large amount of halogen ions, the halogen ions will contaminate the inside of the capacitor through the rubber seal materials, causing the capacitor to become a failure. Depending on solvent materials that the adhesive or coating materials contains, note that the surface of a capacitor may change in appearance. 5 Capacitor disposal 7 Contingencies during ofsize devices capacitor with more thanoperation a certain case has the pres13) A Precautions sure relief vent functioning to escape abnormal gas pressure increase. If gas expels from a venting capacitor, disconnect the power supply of the device or unplug the power supply cord. If not disconnecting the power supply, the deStorage 6 Device circuits design considerations 1 About 8 vice circuitAEC-Q200 may be damaged due to the short circuit failure inspections 4 ofMaintenance the capacitor or short-circuited with the liquid that the gas was condensed to. It may cause secondary damages such as device burnout in the worst case scenario. The gas that comes out of the open vent is vaporized electrolyte not Capacitor compliance disposal for EU REACH Regulation 7 Installation 2 Regarding 9 smoke. gas expelled from a venting capacitor is more than 100 C. 25) The Contingencies Never expose your face to the capacitor. If your eyes are exposed to the gas or you inhale it, immediately flush your eyes and/or gargle with water. If the electrolyte comes in contact with the skin, wash with soap and water. About AEC-Q200 8 Precautions during operation of devices 3 Catalogs 10 6 Storage 1 ) Do not store capacitors at high temperature or high humidity. 6 ) Fumigation Store the capacitors indoors at temperatures of 5 to 35C and humidifies of less than 75%RH. Regarding compliance for EU REACHshould Regulation 9 InMaintenance principle, aluminum electrolytic capacitors be used inspections 4 2 years after production. Capacitor disposal 7 within 2 ) Keep capacitors packed in the original packaging material wherever possible. 3 ) Avoid the following storage environmental conditions: Water spattering, high temperatures, high humidity or conCatalogs 10 Contingencies 5 densation environment. Oil spattering or oil mist filled. AEC-Q200 8 About Salt water spattering or salt filled. Acidic toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine, bromine and methyl bromide filled. Alkaline toxic gases such as ammonium filled. 6 Storage Acid or alkaline solutions spattering. Regarding for rays EU REACH Regulation 9 Direct sunlight, compliance ozone, ultraviolet or radiation. Extreme vibration or shock loading. 4 ) JEDEC J-STD-020 is not applicable. In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. circuitsare design considerations 1 Device Where the capacitors exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with halogen ions in the same way as cleaning agents. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth so that fumigation is not required. For customers to export or import electronic devices, 2 Installation semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 3 Device circuits design considerations Precautions during operation of devices Precautions during operation of devices (1) Never touch the terminals of a capacitor directly with bare hands. (2) Do not short-circuit between the capacitor terminals with anything conductive. Also, do not spill any conductive liquid as acid or alkaline solution over a capacitor. Maintenance inspections 4 such (3) Confirm environmental conditions where the device will be placed. Do not use the devise in the following environmental conditions: Water or oil spatters, or high condensation environment. Direct sunlight. Contingencies 5 Ozone, ultraviolet rays or radiation. Toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine and its compounds, bromine and itscom- 7 Capacitor disposal Catalogs 10 Please consult with a local organization for the proper disposal of industrial waste. For incinerating capacitors, apply a high temperature incineration (over 800C). Incinerating them at temperatures lower than that may produce toxic gases such as chlorine. To prevent capacitors from explosion, punch holes in AEC-Q200 8 About or sufficiently crush the can cases of the capacitors, then incinerate. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 6 Storage 63 9 Regarding compliance for EU REACH Regulation CAT. No. E1001O 3 7 5 Precautions during operation of devices Return Capacitor disposal Contingencies 4 8 6 Maintenance inspections About AEC-Q200 Storage 9 Regarding compliance for EU REACH Regulation Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) The Automotive Electronics Council (AEC) was originally established by American major automotive manufactures. Today, the committees are composed of representatives from the sustainContingencies 5 Members ing of manufacturing companies in automotive electrical components.compliance It has standardized the criteria for"stress for EU REACH Regulation 9 Regarding Capacitor disposal 7 qualification" test and"reliability test"for the electronic components. AEC-Q200 is the reliability test standard for approval of passive components, it has been specified test subjects and quantity 6 Storage etc. for each components. Criteria of reliability tests for AlumiCatalogsCapacitors are also described in this. 10 Electrolytic num About requirement, AEC-Q200 Chemi-Con has submits the test re8 customer As sults according to AEC-Q200 for the Aluminum Electrolytic Capacitors used in automotive applications to increase in recent years. Please contact us for more information. disposal 7 Capacitor 1 ) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published AEC-Q200 8 onAbout May 2008), our electronic components are"articles without any intended release". Therefore they are not applica- for"Registration"for EU REACH Regulation Article 7 10 bleCatalogs (1). Reference: Electrolytic Condenser Investigation Society "Study of REACH Regulation in EU about Electrolytic Capacitor"(publicized on 13 March 2008) Regarding compliance REACH Regulation Chemi-Con develops for the EU products without substance 29) Nippon of very high concern (SVHC). DEHP (CASNo.117-81-7) was contained as some covering material, Nippon ChemiCon abolished use of DEHP totally at Jun 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA/EIAJ RCR-2367C (March 2006) with the title of" Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment". Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 64 CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Product code guide (Conductive polymer Hybrid Surface mount type) (Example : HXA series, 16V-82F, 6.3x5.8L) Please refer to the following table Contents Code Conductive Polymer H 1 2 3 Series Code Type Code HXA HXA SMD A 4 5 6 7 H HXA 16 0 Category Series code Voltage code Voltage(V) Code 16 160 25 250 35 350 50 500 63 630 Type Plastic Reel Tol.(%) 20 Code Terminal plating material Code M Sn-Bi G 8 9 10 11 12 13 14 15 16 17 18 A RA 8 2 0 M F 61 G Terminal code TapingTray code Reel dia. Application size Code (mm) D(mm) 380 D=4 to 10 RA Refer to product guide for taping specifications. Capacitance code Capacitance tolerance Size code D(mm) Code Cap.(F) Code 10 100 6.3 F 22 220 8 H 33 330 10 J 82 820 100 101 220 221 330 331 Supplement code L(mm) Code 5.8 7.7 10 61 80 A0 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 65 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXA Surface Mount New! Series High reliability and high voltage are realized by hybrid electrolyte Endurance with ripple current : 4,000 hours at 125 Rated voltage range : 16 to 63Vdc, Capacitance range : 10 to 470F For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) RoHS Compliant HXA Higher temperature HXB P68 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125 16 to 63Vdc 20% (M) I=0.01CV Where, I : Max. leakage current (A , C: Nominal capacitance(F, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V tan 0.16 0.14 0.12 0.10 0.08 Max.) Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance MARKING Code : A EX) 35V47F Vent for JA0 26A Size Code F61 F80 HA0 JA0 P C0.2 B0.2 D0.5 W 0.3max. L0.3 (Note) D 6.3 6.3 8 10 L A B C 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 A0.2 PART NUMBERING SYSTEM 2 3 4 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 1.9 3.1 4.5 47 V HA Rated Voltage Symbol Rated voltage (Vdc) 16 25 35 50 63 Note : L0.5 for HA0 and JA0 1 (at 20, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] H HXA (at 20 after 2 minutes) Z(-25)/Z(+20)1.5 Z(-55)/Z(+20)2.0 Shelf Life Terminal (at 20, 120Hz) 18 G Symbol C E V H J Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 66 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXASeries New! STANDARD RATINGS WV (Vdc) 16 25 35 50 63 Cap (F) Size code ESR mmax./20, 100kHz Rated ripple current mArms/125, 100kHz) Part No. 82 150 270 470 56 100 220 330 47 68 150 270 22 33 68 100 10 22 33 56 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 45 27 22 18 50 30 27 20 60 35 27 20 80 40 30 28 120 80 40 30 950 1,300 1,700 2,100 900 1,400 1,600 2,000 900 1,400 1,600 2,000 750 1,100 1,250 1,600 700 900 1,100 1,400 HHXA160ARA820MF61G HHXA160ARA151MF80G HHXA160ARA271MHA0G HHXA160ARA471MJA0G HHXA250ARA560MF61G HHXA250ARA101MF80G HHXA250ARA221MHA0G HHXA250ARA331MJA0G HHXA350ARA470MF61G HHXA350ARA680MF80G HHXA350ARA151MHA0G HHXA350ARA271MJA0G HHXA500ARA220MF61G HHXA500ARA330MF80G HHXA500ARA680MHA0G HHXA500ARA101MJA0G HHXA630ARA100MF61G HHXA630ARA220MF80G HHXA630ARA330MHA0G HHXA630ARA560MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 67 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXB Surface Mount New! Series High reliability and high voltage are realized by hybrid electrolyte Endurance with ripple current : 5,000 hours at 105 Rated voltage range : 16 to 63Vdc, Capacitance range : 10 to 470F For high reliability applications. (Automotive equipment, Base station equipment, etc.) RoHS Compliant HXA P66 Higher temperature HXB SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 16 to 63Vdc 20% (M) I=0.01CV Where, I : Max. leakage current (A , C: Nominal capacitance(F, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V tan 0.16 0.14 0.12 0.10 0.08 Max.) Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance MARKING Code : A EX) 35V47F Vent for JA0 26A Size Code F61 F80 HA0 JA0 P C0.2 B0.2 D0.5 W 0.3max. L0.3 (Note) D 6.3 6.3 8 10 L A B C 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 A0.2 PART NUMBERING SYSTEM 2 3 4 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 1.9 3.1 4.5 47 V HB Rated Voltage Symbol Rated voltage (Vdc) 16 25 35 50 63 Note : L0.5 for HA0 and JA0 1 (at 20, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 . Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value ESR 200% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] H HXB (at 20 after 2 minutes) Z(-25)/Z(+20)1.5 Z(-55)/Z(+20)2.0 Shelf Life Terminal (at 20, 120Hz) 18 G Symbol C E V H J Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 68 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXBSeries New! STANDARD RATINGS WV (Vdc) 16 25 35 50 63 Cap (F) Size code ESR mmax./20, 100kHz Rated ripple current mArms/105, 100kHz) Part No. 82 150 270 470 56 100 220 330 47 68 150 270 22 33 68 100 10 22 33 56 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 45 27 22 18 50 30 27 20 60 35 27 20 80 40 30 28 120 80 40 30 1,600 2,200 2,500 2,600 1,300 2,000 2,300 2,500 1,300 2,000 2,300 2,500 1,100 1,600 1,800 2,000 1,000 1,500 1,600 1,800 HHXB160ARA820MF61G HHXB160ARA151MF80G HHXB160ARA271MHA0G HHXB160ARA471MJA0G HHXB250ARA560MF61G HHXB250ARA101MF80G HHXB250ARA221MHA0G HHXB250ARA331MJA0G HHXB350ARA470MF61G HHXB350ARA680MF80G HHXB350ARA151MHA0G HHXB350ARA271MJA0G HHXB500ARA220MF61G HHXB500ARA330MF80G HHXB500ARA680MHA0G HHXB500ARA101MJA0G HHXB630ARA100MF61G HHXB630ARA220MF80G HHXB630ARA330MHA0G HHXB630ARA560MJA0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 69 CAT. No. E1001O Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS RECOMMENDED SOLDERING CONDITIONS SURFACE MOUNT TYPE The following conditions are recommended for air or infrared reflow soldering HXA/HXB series onto a glass epoxy circuit board of 90x50x0.8mm (with resist) by cream solder. The temperatures shown are the surface temperature values on the top of the can and temperature of capacitor terminal. Reflow should be performed twice or less. Please ensure that the capacitor became cold enough to the room temperature (5 to 35) before the second reflow. Temperature on the top of capacitor () and Temperature of capacitor terminal () Recommended soldering heat conditions Peak temp. Peak 230 Time maintained Time maintained Peak temp. above 217 above 230 F61, F80 50 sec. max. 40 sec.max. 260 max. 150 to 180V 260 max. HA0, JA0 120 sec. max. 50 sec. max. 40 sec.max. 245 max. Size Code Max. period of time over 230 217 Max. period of time over 217 Preheat Reflow number 2-cycle allowed 1-cycle only 2-cycle allowed Preheat Time (sec.) Recommended Solder Land on PC Board c b a a 1.9 3.1 4.5 Size code F61, F80 HA0 JA0 b 3.5 4.2 4.4 [mm] c 1.6 2.2 2.2 b Solder land on PC board PRECAUTIONS FOR USERS Soldering method SMD type have no capability to withstand such dip or wave soldering as totally immersing components into a solder bath. Reflow soldering Mechanical stress Do not grab the capacitors to lift the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Reflow the capacitors within Recommended Reflow Soldering Conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult with us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic-made board needs more heat than a glass epoxy-made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Case leakage current will increase (mA) after the reflow process, the leakage current which rose gradually decreases when voltage is applied. 9.Please consult us about vapor phase soldering (VPS). Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine in resin will penetrate the end seal, reach the element, and damage of the capacitor. Glue The followings are requirements for glue. 1.A low curing temperature over a short period of time 2.Strong adhension and heat resistance after curing 3.Long shelf life 4.No corrosion Others Refer to PRECAUTIONS AND GUIDELINES(Conductive Polymer Hybrid). Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 38010 and an exposure time of 30.5 seconds. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 70 CAT. No. E1001O Return Group Chart Aluminum Electrolytic Capacitors 71 Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) For Conductive Polymer Aluminum Solid Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer). For Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer Hybrid). 1 Device circuits design considerations 8) Failure mode of capacitors 1) Confirm installation and operating requirements for capacitors, then use them within the performance limits prescribed in this catalog or product specifications. Non-solid aluminum electrolytic capacitors have a limited lifetime which ends in an open circuit failure mode, in general. Depending on the product type and operating conditions, the failure mode may involve in opening of the pressure relief vent. 2) Polarity 9) Capacitor insulation Aluminum electrolytic capacitors are polarized. Never apply a reverse voltage or AC voltage. Connecting with wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on. To identify the polarity of a capacitor, see the relevant diagram in the catalogs or product specifications, or the polarity marking on the body of the capacitor. Incidentally, the rubber end seal bungs of the radial lead type capacitors have a solder-flux gas escaping configuration, which is nothing to do with the polarity of the capacitors. For circuits where the polarity is occasionally reversed, use a bi-polar type of aluminum electrolytic capacitor. However, note that even bi-polar type capacitors must not be used for AC circuits. Electrically isolate the following sections of a capacitor from the negative terminal, the positive terminal and the circuit patterns. * The outer can case of a non-solid aluminum capacitor. * The dummy terminal of a snap-in type non-solid aluminum capacitor, which is designed for mounting stability. 10) Outer sleeve The outer sleeve of a capacitor does not assure electrical insulation (except for screw-terminal type capacitors). It should not be used where electrical insulation is required. 11) Operating conditions 3) Operating voltage Do not use/expose capacitors to the following conditions: Direct contact with water, salt water or oil, or high condensation environment. Direct sunlight. Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. Ozone, ultraviolet rays or radiation. Extreme vibration or mechanical shock that exceeds limits in the catalogs or product specifications. Do not apply an over-voltage that exceeds a rated voltage specified for the capacitors. The total peak value of the ripple voltage plus the DC voltage must not exceed the rated voltage of the capacitors. Although capacitors specify a surge voltage that exceeds the full rated voltage, it does not assure long-term use but limited use under specific conditions. 4) Ripple current Do not apply an overcurrent that exceeds the rated ripple current specified for the capacitors. Excessive ripple current will increase heat production within the capacitors, causing the capacitors to be damaged as follows: * Shorten lifetime * Open pressure relief vent * Short circuit The rated ripple current is specified along with a specific ripple frequency. Where using the capacitors at any other ripple frequency other than the specified frequency, calculate the allowable ripple current by multiplying the rated ripple current by a frequency compensation factor (Frequency Multiplier) specified for each product series. 12) Mounting Non-solid aluminum electrolytic capacitors contain paper separators and electric-conductive electrolyte that contains organic solvent as main solvent material, both of which are flammable. If the electrolyte leaks onto a printed circuit board, it can erode the device circuit pattern, may short-circuit the copper traces, smoke and burn. Make sure of designing a PC board as follows: * Provide the appropriate hole spacing on the PC board to match the terminal spacing of a capacitor. * Provide the following adequate clearance space over the pressure relief vent of a capacitor to avoid blocking the correct opening of the pressure relief vent. Case diameter Clearance 8(6.3) to16mm: 2mm minimum 18 to35mm: 3mm minimum 40 mm and above: 5mm minimum * Do not locate any wire or circuit pattern over the pressure relief vent of a capacitor. * If a capacitor is mounted with its pressure relief vent facing down on the PC board, provide a ventilation hole in the board beneath it to let gas escape when the vent opens. * Do not print any copper trace under the seal (terminal) side of a capacitor. Copper traces should be 1 mm (preferably 2mm or more) spaced apart from the side of the capacitor body. * Avoid locating any heat source components near capacitors or on the opposite side of the PC board under capacitors. * In designing a double-sided PC board, do not locate any through-hole via or unnecessary hole underneath a capacitor. * In designing a double-sided PC board, do not print any circuit pattern underneath a capacitor. For a screw terminal type capacitor, tightening the terminal screws and the mounting clamp should be within the maximum torque specified in the catalogs or product specifications. Do not mount a screw terminal type capacitor with the terminals facing downward. Also, if the body of a capacitor is installed horizontally such as being laid on its side, do not position the pressure relief vent downward. For a chip type capacitor, design the land patterns of the PC board in accordance with the recommended footprint dimensions described in the catalogs or product specifications. 5) Operating temperature (Category temperature) Do not apply high temperatures that exceed the upper limit of the category temperature range specified for the capacitors. Using the capacitor at temperatures higher than the upper limit will considerably shorten the lifetime of the capacitor and make the pressure relief vent open. In other words, lowering ambient temperatures will extend the expected lifetime of the capacitors. 6) Lifetime Select the capacitors to meet the service life requirements of a device. 7) Charging and discharging Do not use capacitors in circuits intended for rapid charge and discharge cycle operations. If capacitors are used in the circuits that repeat a charge and discharge with a large voltage drop or a rapid charge and discharge at a short interval cycle, capacitance will decrease and/or the capacitors will be damaged by internal heat generation. Consult us for a heavy charge and discharge type of capacitor so that the capacitor will be designed in accordance with requirements of duty cycle of charge and discharge, the number of cycles, discharging resistance and operating temperatures. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 72 CAT. No. E1001O Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) 13) Using capacitors for significantly safety-oriented applications in the catalogs or product specifications. * Do not apply flux to any part of a capacitor other than the terminals. * Do not let any other component lean against nor come into contact with the capacitor while soldering. For reflow soldering, consider the following conditions: * Soldering conditions (preheat, reflow temperature and time) should be within the limits prescribed in the catalogs or product specifications. * When using the infrared heater and setting its temperatures, adjust the heating levels taking into consideration that the color and materials of a capacitor vary in their infrared absorbance. * The allowable number of reflow passes is specified in the catalogs or product specifications. * When mounting a capacitor on the double-sided PC board, do not place any wiring pattern underneath the capacitor. * Please consult us about vapor phase soldering (VPS). Do not try to reuse the capacitor that was removed from the PC board after soldering. Only use chip type capacitors for reflow soldering. The other type capacitors are not designed for the reflow. Consult us about capacitors for a device application affecting human safety (Aviation and aerospace Nuclear Medical Vehicle) or for any device whose failure will make an impact on society. Note that some products such as photoflash use capacitors which have been designed for specific applications cannot be used for any other application. 14) Others Design device circuits taking into consideration the following conditions: Electrical characteristics of a capacitor depend on the temperature and frequency. In designing the device circuits, consider the change in the characteristics. If using more than one capacitor connected in parallel, design the device circuits to balance the current flow in individual capacitors. If using more than one capacitor connected in series, connect shunting resistors in parallel with the individual capacitors to balance the voltage. 2 Installation 3) Handling after soldering 1) Assembling After soldering the PC board, do not apply the following mechanical stress to the capacitor: Do not tilt, push down or twist the body of the capacitor. Do not grab the body of the capacitor to carry the assembly board. Do not hit anything against the capacitor. When stacking the assembled boards, do not put any of the PC boards or other components against the capacitor. Do not drop the assembled board. Do not try to reuse the capacitors once assembled and electrified, except only capacitors that are taken from a device for periodic inspection to measure their electrical characteristics. Capacitors may have been spontaneously recharged with time by a recovery voltage phenomenon. In this case, discharge the capacitors through a resistor of approximately 1k before use. If non-solid aluminum electrolytic capacitors have been stored at any conditions more than 35 and 75%RH for long storage periods of time more than the limits specified in the catalogs or product specifications, they may have high leakage current. In this case, make pre-conditioning by applying the rated voltage through a resistor of approximately 1k. Confirm the rated capacitance and voltage of capacitors before installation. Confirm the polarity of capacitors before installation. Do not try to use the capacitors that were dropped to the floor and so forth. Do not deform the can case of a capacitor. Make sure that the terminal spacing of a capacitor equals the holes spacing on the PC board before installing the capacitor. For radial lead type capacitors, some standard pre-formed lead types are also available. When installing a snap-in type capacitor on the PC board, insert the terminals into the holes and press the capacitor down until the body is settled flush on the surface of the PC board (without the body standing off). Do not apply excessive mechanical force to capacitors more than the limits prescribed in the catalogs or product specifications. Avoid excessive mechanical force while the capacitors are in the process of vacuum-picking, placing and positioning by automatic mounting machines or cutting the lead wires by automatic insertion machines. 4) Cleaning assembly boards Do not clean capacitors with the following cleaning agents: * Halogenated solvents: cause capacitor failures due to corrosion. * Alkali system solvents: corrode (dissolve) the aluminum can case. * Terpene and petroleum system solvents: deteriorate the rubber seal materials. * Xylene: deteriorates the rubber seal materials as well. * Acetone: erases the markings printed on a capacitor. Where cleaning is necessary, use only solvent resistant type capacitors that have been assured for the cleaning within the specific cleaning conditions prescriber in the catalogs or product specifications. In particular, carefully set up the conditions for ultrasonic cleaning system. Where cleaning the solvent resistance type of aluminum electrolytic capacitors, confirm the following conditions: * Control the contamination (the conductivity, pH, specific gravity, water content, etc.) of the cleaning agents. * After the cleaning, do not leave the capacitors (assembly boards) in an environment of cleaning agent-rich or in a closed container. Sufficiently evaporate the residual cleaning agent from the assembly boards and the capacitors by forced hot air at temperatures less than the upper limit of category temperature range for more than 10 minutes. In general, aluminum electrolytic capacitors are sensitive to contamination of halogen ions (particularly to chlorine ions). Depending on the properties of the electrolyte and rubber seal materials used in a capacitor, the halogen ions lead up to catastrophic failures on the capacitor. Where the inside of a capacitor has been contaminated with more than a certain amount of halogen ions and the capacitor is in use, the corrosion reaction of aluminum occurs. The corrosion causes the capacitor to have a significant increase in leakage current with heat produced, open the pressure relief vent and become open circuit mode failure. Due to global environmental issues (greenhouse effects and other environmental destruction by depletion of the ozone layer), the conventional cleaning solvents of CFC 113, Trichloroethylene and 1,1,1-trichloroethylene were replaced by substitutes. The following are some substitute cleaning agents and allowable cleaning conditions: 2) Soldering and heat resistance For soldering using a soldering iron, consider the following conditions: * Soldering conditions (temperature and time) should be within the limits prescribed in the catalogs or product specifications. * If it is necessary to pre-form the terminal spacing of a capacitor to match the hole spacing on the PC board before assembly and soldering, do not make mechanical stress reach into the body of the capacitor but only the lead wires. * Do not touch the body of a capacitor with the hot tip of the soldering iron. For flow soldering, consider the following conditions: * Do not dip the body of a capacitor into a solder bath. Expose only the terminals to the melt solder with the PC board interposing between the solder and the body of the capacitor. Solder only the reverse side of the PC board where the body of the capacitor is not located. * Soldering conditions should be within the limits prescribed Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 73 CAT. No. E1001O Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) 3 a) Fatty-alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750H, 750K, 750L and 710M (Kao) Technocare FRW-14, 15, 16 and 17 (Momentive Performance Materials) [Cleaning conditions] Either of immersion or ultrasonic cleaning, for a maximum of 10 minutes and at a maximum liquid temperature of 60 is acceptable. Make sure that the markings on the capacitor are not rubbed against any other component or the PC board during cleaning. Note that shower cleaning affects the markings on the capacitor. b) HCFC (Freon 225) as Alternative CFCs AK225AES (Asahi Glass) [Cleaning conditions] Solvent resistant type capacitors, which were originally developed to intend to resist Freon TE or Freon TES, are also capable of withstanding any one of immersion, ultrasonic or vapor cleaning, for a maximum of 5 minutes (or 2 minutes for KRE and KRE-BP series capacitors or 3 minutes for SRM series). However, this type of cleaning agent is not recommended to use, as the cleaning materials may be banned in near future in view of global environmental issues. c) IPA (Isopropyl Alcohol) Immersion cleaning with a maximum flux concentration of 2 wt% is acceptable. Precautions during operation of devices 1) Never touch the terminals of a capacitor directly with bare hands. 2) Do not short-circuit between the capacitor terminals with anything conductive. Also, do not spill any conductive liquid such as acid or alkaline solution over a capacitor. 3) Confirm environmental conditions where the device will be placed. Do not use the devise in the following environmental conditions: Water or oil spatters, or high condensation environment. Direct sunlight. Ozone, ultraviolet rays or radiation. Toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. Extreme vibration or mechanical shock that exceeds the limits in the catalogs or product specifications. 4 Maintenance inspections 1) For industrial use capacitors, make periodic inspections of the capacitors. Before the inspections, turn off the power supply of the device and discharge the electricity of the capacitors. Where checking it by a volt-ohm meter, confirm the polarity beforehand. Do not apply mechanical stress to the terminals of the capacitors during inspection. 2) Characteristics to be inspected Significant damage in appearance: vent opening, electrolyte leakage, etc. Electrical characteristics: leakage current, capacitance, tan and other characteristics prescribed in the catalogs or product specifications If finding anything abnormal on the characteristics above, check the specifications of the capacitor and take appropriate actions such as replacement. 5) Adhesives and coating materials Do not use any adhesive or coating materials containing halogenated solvents. Make sure of the following conditions before applying adhesive or coating materials to a capacitor, * No flux residue nor stain is left between the rubber seal of a capacitor and PC board. * Dry the capacitor to remove residual cleaning agents before applying adhesive and coating materials. Do not cover up the entire surface of the rubber seal of the capacitor with adhesives or coating materials. * Heating and curing conditions for adhesives and coating materials should be followed as prescribed in the catalogs or product specifications. * Covering up the entire surface of the rubber seal with resin mold materials will obstruct the normal diffusion of internal hydrogen gas from a capacitor and result in serious failures. Also, where the adhesive and coating materials contain a large amount of halogen ions, the halogen ions will contaminate the inside of the capacitor through the rubber seal materials, causing the capacitor to become a failure. * Depending on solvent materials that the adhesive or coating materials contains, note that the outer sleeve of a capacitor may lose a gloss or whiten in appearance. 5 Capacitor venting 1) A capacitor with more than a certain case size has the pressure relief vent functioning to escape abnormal gas pressure increase. If gas expels from a venting capacitor, disconnect the power supply of the device or unplug the power supply cord. If not disconnecting the power supply, the device circuit may be damaged due to the short circuit failure of the capacitor or short-circuited with the liquid that the gas was condensed to. It may cause secondary damages such as device burnout in the worst case scenario. The gas that comes out of the open vent is vaporized electrolyte, not smoke. 2) The gas expelled from a venting capacitor is more than100C. Never expose your face to the capacitor. If your eyes are exposed to the gas or you inhale it, immediately flush your eyes and/or gargle with water. If the electrolyte comes in contact with the skin, wash with soap and water. 6) Fumigation In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. Where aluminum electrolytic capacitors are exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with halogen ions in the same way as cleaning agents. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth so that fumigation is not required. For customers to export or import electronic devices, semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 6 Storage 1) Do not store capacitors at high temperature or high humidity. Store the capacitors indoors at temperatures of 5 to 35 and humidities of less than 75%RH. In principle, aluminum electrolytic capacitors should be used within three years after production. 2) Keep capacitors packed in the original packaging material wherever possible. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 74 CAT. No. E1001O Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) 3) Avoid the following storage environmental conditions: Water spattering, high temperatures, high humidity or condensation environment. Oil spattering or oil mist filled. Salt water spattering or salt filled. Acidic toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine, bromine and methyl bromide filled. Alkaline toxic gases such as ammonium filled. Acid or alkaline solutions spattering. Direct sunlight, ozone, ultraviolet rays or radiation. Extreme vibration or shock loading. 4) JEDEC J-STD-020 is not applicable. 7 Capacitor disposal Please consult with a local organization for the proper disposal of industrial waste. For incinerating capacitors, apply a hightemperature incineration (over 800). Incinerating them at temperatures lower than that may produce toxic gases such as chlorine. To prevent capacitors from explosion, punch holes in or sufficiently crush the can cases of the capacitors, then incinerate. 8 About AEC-Q200 The Automotive Electronics Council (AEC) was originally established by American major automotive manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for "stress test qualification" and "reliability test" for the electronic components. AEC-Q200 is the reliability test standard for approval of passive components, it has been specified test subjects and quantity etc. for each components. Criteria of reliability tests for Aluminum Electrolytic Capacitors are also described in this. As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for the Aluminum Electrolytic Capacitors used in automotive applications to increase in recent years. Please contact us for more information. 9 Regarding compliance for EU REACH Regulation 1) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are "articles without any intended release". Therefore they are not applicable for "Registration" for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society "Study of REACH Regulation in EU about Electrolytic Capacitor" (publicized on 13 March 2008) 2) Nippon Chemi-Con develops the products without substance of very high concern(SVHC).DEHP(CASNo.11 7-81-7) was contained as some covering material, Nippon Chemi-Con abolished use of DEHP totally at June, 2011. 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA/EIAJ RCR-2367C (March 2006) with the title of "Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment". Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 75 CAT. No. E1001O Return Group Chart ALUMINUM ELECTROLYTIC CAPACITORS RECOMMENDED SOLDERING CONDITIONS SURFACE MOUNT TYPE AlchipTM MVA/MVE/MZR/MZJ/MZA/MVY/MZF/MZE/MZK/MLA/MLF/MLE/MLK/ MVL/MVJ/MVH/MHL/MHB/MHJ/MHK/MKB/MV-BP/MVK-BP The following conditions are recommended for air convection and infrared reflow soldering on the SMD products onto a glass epoxy circuit boards by cream solder. The dimensions of the glass epoxy boards with resist are 90x50x0.8mm for D55 to KG5 case code SMD capacitors and 180x90x0.8mm for LH0 to MN0 case codes SMD capacitors. The temperatures shown are the surface temperature values on the top of the can and on the capacitor terminals. Reflow should be performed twice or less. Please ensure that the capacitor became cold enough to the room temperature (5 to 35) before the second reflow. Consult with us when performing reflow profile in IPC / JEDEC (J-STD-020) Recommended soldering heat conditions (Except for Conductive Polymer Aluminum Solid Capacitors) Peak temp. Peak 230 SMD type Size code Max. period of time over 230 Temp () 217 Max. period of time over 217 Preheat Vertical Time (sec.) Recommended Voltage range (Vdc) 4 to 63V Preheat Time maintained Time maintained Peak temp. Reflow number above 217 above 230 D55 to F90 (Except 63V for MVH) 90sec. max 60sec. max. 260max. 2 times or less 60sec. max. 40sec. max. 250max. 2 times or less H63 to JA0 63V(MVH), 80V 150 to 180 4 to 50V 120sec. max. 60sec. max. 30sec. max. 245max. 2 times or less 63 to 100, 400V 30sec. max. 20sec. max. 240max. 2 times or less 6.3 to 50V 30sec. max. 20sec. max. 240max. 2 times or less 63 to 450V 20sec. max. - 230max. 2 times or less KE0 to MN0 Solder Land on PC Board [mm] Size code D55, D60, D61, D73 E55, E60, E61, E73 F55, F60, F61, F73, F80, F90 H63 HA0 JA0 KE0, KG5 LH0, LN0 MH0, MN0 c b a b : Solder land on PC board Location of capacitor RADIAL LEAD AND SNAP-IN TYPE Recommended soldering heat conditions Flow soldering 2605 for 101 seconds Hand soldering 38010 for 30.5 seconds Terminal code : A a 1.0 1.4 1.9 2.3 3.1 4.5 4.0 6.0 6.0 b 2.6 3.0 3.5 4.5 4.2 4.4 5.7 6.9 7.9 c 1.6 1.6 1.6 1.6 2.2 2.2 2.5 2.5 2.5 Terminal code : G a b c 3.1 4.5 3.4 4.7 4.7 4.2 4.4 6.3 7.8 8.8 3.5 3.5 9.3 9.6 9.6 PRECAUTIONS FOR USERS Soldering method The capacitors of Alchip-series have no capability to withstand such dip or wave soldering as totally immerses components into a solder bath. Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 38010 and an exposure time of 30.5 seconds. Mechanical stress Reflow soldering Reflow the capacitors within recommended reflow soldering conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic made board needs more heat than a glass epoxy made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat increase may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat increase may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Vapor soldering not used. 8.Pleasephase consult us about(VPS) vaporisphase soldering (VPS). Do not use the capacitors for lifting the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; then, increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine contained resin will penetrate into the end seal, reach the inside element, and cause damage of the capacitor. Others Refer to PRECAUTIONS AND GUIDELINES. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 76 CAT. No. E1001O Return Group Chart Surface Mount Aluminum Electrolytic Capacitors 77 Return Group Chart 78 Return Group Chart PART NUMBERING SYSTEM Product code guide (Surface mount type) (Example : MVA series, 25V-47F,6.3x5.2L) Please refer to the following table Contents Code Series Code Type Code Tol.(%) Code Polar E MVA MVA No dummy terminal A 20 M Bi-polar B MV(Bi-polar) MV- With dummy terminal G 1 2 3 4 5 6 7 Terminal plating material Code Sn-Bi G Sn S 8 9 10 11 12 13 14 15 16 17 18 A DA 4 7 0 M F 5 5 G MV A 2 5 0 Category Series code Voltage code Terminal code Taping type Reel dia. Application size Code (mm) D(mm) Cap.(F) Code 1.0 1R0 4 D 5.2 55 D=4 to 18 4.7 4R7 5 E 5.7 60 (not D=12.5 D=4 to 18 DB 10 100 6.3 F 5.8 61 47 470 8 H 6.3 63 D=4 to 12.5 D=12.5 to 18 100 101 10 J 7.0 73 470 471 12.5 K 7.7 80 1,000 102 16 L 8.7 90 18 M 10 A0 Voltage(V) Code 4 4R0 6.3 6R3 10 100 25 250 100 101 250 251 Taping E Cardboard Reel Plastic Reel Tray 380 330 380 - Capacitance code TapingTray code DA RA TR Refer to product guide for taping and tray specifications. Capacitance tolerance Supplement code Size code D(mm) Code L(mm) Code 13.5 E0 16 G5 16.5 H0 21.5 N0 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 79 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip Standard, 85 MVA - Series 4 through 18 case sizes are fully lined up Endurance : 2,000 hours at 85 Suitable to fit for downsized equipment Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVA 105 MVE P82 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 4 to 450Vdc (at 20, 120Hz) 20% (M) Rated voltage (Vdc) 4 to 100V 160 to 450V D55 to JA0 I=0.01CV or 3A, whichever is greater.(after 2 minutes) KE0 to MN0 I=0.03CV or 4A, whichever is greater.(after 1 minute) I=0.04CV+100A max.(after 1 minute) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Dissipation Factor Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V (tan) D55 to JA0 0.42 0.35 0.30 0.26 0.16 0.14 0.12 0.12 0.12 tan (Max.) KE0 to MN0 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10 0.20 0.25 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V Low Temperature Characteristics Z(-25)/Z(+20) 7 4 3 2 2 2 2 2 3 (Max. Impedance Ratio) D55 to JA0 Z(-40)/Z(+20) 17 10 8 6 4 3 3 3 4 Z(-25)/Z(+20) 5 4 3 2 2 2 2 2 3 6 KE0 to MN0 Z(-40)/Z(+20) 12 10 8 5 4 3 3 3 6 10 (at 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 85. Size code D55 to JA0 D55 to JA0 KE0 to MN0 Rated voltage (Vdc) 4V & 6.3V 10 to 100V 6.3 to 450V Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Size code D55 to JA0 D55 to JA0 KE0 to MN0 Rated voltage 4V & 6.3V 10 to 100V 6.3 to 450V Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value DIMENSIONS [mm] Terminal Vent (Except D55 to HA0) Size D0.5 P C0.2 B0.2 D0.5 0.3max. Vent W 0.3max. L0.3(Note) Code : G (Vibration resistant structure) code : LH0 to MN0 Size code A0.2 L0.5 A0.2 Note : L0.5 for HA0 to MN0 : Dummy terminals MARKING D55 to JA0 EX) 16V47F KE0 to HN0 EX) 25V1,000F 7hA 47 16V 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 D55 E55 F55 F80 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 L 5.2 5.2 5.2 7.7 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 D 4 5 6.3 6.3 8 10 12.5 12.5 16 16 18 18 A 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 RATED RIPPLE CURRENT MULTIPLIERS 0V MVA Frequency Multipliers 1000 25V Size code D55 to JA0 PART NUMBERING SYSTEM 1 W P C0.2 A to MN0 B0.2 Terminal Code : Size code : D55 18 E MV A AAA A AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,100F:101) Taping*Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,100V:101,450V:451) Series code Category KE0 to MN0 Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 1,500 4.7 10 to 68 100 to 1,000 2,200 to 10,000 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1k 1.50 1.30 1.05 1.75 1.50 1.30 1.05 10k 1.75 1.40 1.08 2.30 1.75 1.40 1.08 100k 1.80 1.50 1.08 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 80 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip Standard, 85 MVASeries - STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 35 is not solvent resistant. Cap (F) Size code tan Rated ripple current (mArms/ 85, 120Hz) Part No. 33 47 100 220 330 470 1,000 33 47 100 220 330 470 680 820 1,000 1,500 2,200 3,300 3,300 4,700 6,800 6,800 10,000 22 33 47 100 150 220 330 470 1,000 2,200 3,300 4,700 4,700 6,800 22 33 47 100 150 220 330 470 680 1,000 2,200 3,300 3,300 4,700 10 22 33 47 56 100 150 220 330 470 1,000 2,200 2,200 3,300 4.7 10 22 D55 D55 E55 F55 F80 F80 HA0 D55 D55 E55 F55 F80 HA0 HA0 HA0 JA0 JA0 KE0 KG5 LH0 LH0 LN0 MH0 MN0 D55 D55 E55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LN0 MH0 MN0 D55 E55 E55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LN0 MH0 MN0 D55 E55 E55 F55 F55 F80 HA0 HA0 HA0 JA0 KE0 LN0 MH0 MN0 D55 D55 E55 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.40 0.42 0.42 0.44 0.48 0.48 0.56 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.36 0.38 0.40 0.40 0.44 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.30 0.32 0.34 0.34 0.36 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.26 0.28 0.28 0.30 0.14 0.14 0.14 25 30 50 80 135 150 320 30 33 55 88 135 280 290 320 430 480 890 1,000 1,200 1,400 1,750 1,700 2,000 26 30 44 70 79 130 270 280 430 960 1,300 1,550 1,600 1,850 26 37 44 70 110 130 270 280 380 710 1,150 1,450 1,450 1,750 24 41 47 60 66 120 210 260 300 400 820 1,450 1,400 1,800 18 24 41 EMVA4R0ADA330MD55G EMVA4R0ADA470MD55G EMVA4R0ADA101ME55G EMVA4R0ADA221MF55G EMVA4R0ADA331MF80G EMVA4R0ADA471MF80G EMVA4R0ADA102MHA0G EMVA6R3ADA330MD55G EMVA6R3ADA470MD55G EMVA6R3ADA101ME55G EMVA6R3ADA221MF55G EMVA6R3ADA331MF80G EMVA6R3ADA471MHA0G EMVA6R3ADA681MHA0G EMVA6R3ADA821MHA0G EMVA6R3ADA102MJA0G EMVA6R3ADA152MJA0G EMVA6R3ARA222MKE0S EMVA6R3ARA332MKG5S EMVA6R3DA332MLH0S EMVA6R3DA472MLH0S EMVA6R3DA682MLN0S EMVA6R3DA682MMH0S EMVA6R3DA103MMN0S EMVA100ADA220MD55G EMVA100ADA330MD55G EMVA100ADA470ME55G EMVA100ADA101MF55G EMVA100ADA151MF55G EMVA100ADA221MF80G EMVA100ADA331MHA0G EMVA100ADA471MHA0G EMVA100ADA102MJA0G EMVA100ARA222MKE0S EMVA100DA332MLH0S EMVA100DA472MLN0S EMVA100DA472MMH0S EMVA100DA682MMN0S EMVA160ADA220MD55G EMVA160ADA330ME55G EMVA160ADA470ME55G EMVA160ADA101MF55G EMVA160ADA151MF80G EMVA160ADA221MF80G EMVA160ADA331MHA0G EMVA160ADA471MHA0G EMVA160ADA681MJA0G EMVA160ARA102MKE0S EMVA160DA222MLH0S EMVA160DA332MLN0S EMVA160DA332MMH0S EMVA160DA472MMN0S EMVA250ADA100MD55G EMVA250ADA220ME55G EMVA250ADA330ME55G EMVA250ADA470MF55G EMVA250ADA560MF55G EMVA250ADA101MF80G EMVA250ADA151MHA0G EMVA250ADA221MHA0G EMVA250ADA331MHA0G EMVA250ADA471MJA0G EMVA250ARA102MKE0S EMVA250DA222MLN0S EMVA250DA222MMH0S EMVA250DA332MMN0S EMVA350ADA4R7MD55G EMVA350ADA100MD55G EMVA350ADA220ME55G WV (Vdc) 35 50 63 100 160 200 250 400 450 Cap (F) Size code tan 33 100 150 220 330 470 1,000 2,200 3.3 4.7 10 22 33 47 100 220 330 470 470 1,000 1,000 1.0 2.2 3.3 4.7 10 22 33 47 56 68 100 220 330 330 470 470 22 33 68 100 220 220 330 47 68 100 100 22 33 47 68 68 100 10 22 33 47 47 68 4.7 10 22 22 33 4.7 10 22 33 F55 F80 HA0 HA0 JA0 KE0 LH0 MN0 D55 D55 E55 F55 F80 F80 HA0 JA0 KE0 KG5 LH0 LN0 MN0 D55 D55 E55 E55 F55 F80 HA0 HA0 JA0 JA0 KE0 KE0 KG5 LH0 LH0 MH0 HA0 JA0 KE0 KE0 LN0 MH0 MN0 KG5 LH0 LN0 MH0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MN0 0.14 0.14 0.14 0.14 0.14 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.18 0.18 0.18 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Rated ripple current (mArms/ 85, 120Hz) 54 120 210 260 360 600 1,100 1,700 15 18 30 47 70 85 190 320 600 740 850 1,300 1,400 8.0 12 17 20 32 60 110 130 160 170 380 580 720 820 950 1,000 90 120 380 440 850 800 1,000 370 500 590 590 240 310 420 510 510 590 150 240 340 420 420 490 120 140 280 280 350 120 140 280 350 Part No. EMVA350ADA330MF55G EMVA350ADA101MF80G EMVA350ADA151MHA0G EMVA350ADA221MHA0G EMVA350ADA331MJA0G EMVA350ARA471MKE0S EMVA350DA102MLH0S EMVA350DA222MMN0S EMVA500ADA3R3MD55G EMVA500ADA4R7MD55G EMVA500ADA100ME55G EMVA500ADA220MF55G EMVA500ADA330MF80G EMVA500ADA470MF80G EMVA500ADA101MHA0G EMVA500ADA221MJA0G EMVA500ARA331MKE0S EMVA500ARA471MKG5S EMVA500DA471MLH0S EMVA500DA102MLN0S EMVA500DA102MMN0S EMVA630ADA1R0MD55G EMVA630ADA2R2MD55G EMVA630ADA3R3ME55G EMVA630ADA4R7ME55G EMVA630ADA100MF55G EMVA630ADA220MF80G EMVA630ADA330MHA0G EMVA630ADA470MHA0G EMVA630ADA560MJA0G EMVA630ADA680MJA0G EMVA630ARA101MKE0S EMVA630ARA221MKE0S EMVA630ARA331MKG5S EMVA630DA331MLH0S EMVA630DA471MLH0S EMVA630DA471MMH0S EMVA101ADA220MHA0G EMVA101ADA330MJA0G EMVA101ARA680MKE0S EMVA101ARA101MKE0S EMVA101DA221MLN0S EMVA101DA221MMH0S EMVA101DA331MMN0S EMVA161ARA470MKG5S EMVA161DA680MLH0S EMVA161DA101MLN0S EMVA161DA101MMH0S EMVA201ARA220MKE0S EMVA201ARA330MKG5S EMVA201DA470MLH0S EMVA201DA680MLN0S EMVA201DA680MMH0S EMVA201DA101MMN0S EMVA251ARA100MKE0S EMVA251ARA220MKG5S EMVA251DA330MLH0S EMVA251DA470MLN0S EMVA251DA470MMH0S EMVA251DA680MMN0S EMVA401ARA4R7MKE0S EMVA401DA100MLH0S EMVA401DA220MLN0S EMVA401DA220MMH0S EMVA401DA330MMN0S EMVA451ARA4R7MKE0S EMVA451DA100MLH0S EMVA451DA220MLN0S EMVA451DA330MMN0S : Enter the appropriate terminal code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 81 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip MVE - Series MVE Rated voltage range : 6.3 to 450V, capacitance range : 1.0 to 6,800F Endurance : 1,000 to 2,000 hours at 105 Case size range :4x5.2L to 18x21.5L Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Standard, 105 Longer life MVL P105 MVJ P107 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 450Vdc (at 20, 120Hz) 20%(M) Rated voltage (Vdc) 6.3 to 100V 160 to 450V D55 to JA0 I=0.01CV or 3A, whichever is greater (2 minutes) KE0 to MN0 I=0.03CV or 4A, whichever is greater (1 minute) I=0.04CV+100A (1minute) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) See STANDARD RATINGS (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 to 450V Z(-25)/Z(+20) 4 3 2 2 2 2 2 3 D55 to JA0 Z(-40)/Z(+20) 12 8 6 4 3 3 3 4 Z(-25)/Z(+20) 5 4 3 2 2 2 2 2 3 6 KE0 to MN0 (at 120Hz) Z(-40)/Z(+20) 10 8 6 4 3 3 3 3 6 10 The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for the specified period of time at 105. Size code D55 to F80 HA0 to MN0 Time 1,000 hours 2,000 hours Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours (500 hours for B55 to F80 size) at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Size code D55 to F80 HA0 to MN0 Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : A to MN0 Size code : D55 Vent (Except D55 to HA0) Terminal Size Code : G (Vibration resistant structure) Size code code : LH0 to MN0 W 0.3max. Vent 0.3max. L0.3 (Note) A0.2 L0.5 A0.2 P C0.2 B0.2 P C0.2 B0.2 D0.5 W D0.5 Terminal Note : L0.5 for HA0 to MN0 : Dummy terminals MARKING D55 to JA0 Ex)16V22F Size code 1000 25V D55 to JA0 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 Frequency Multipliers 0V MVE 22 16V L 5.2 5.2 5.2 7.7 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 D 4 5 6.3 6.3 8 10 12.5 12.5 16 16 18 18 RATED RIPPLE CURRENT MULTIPLIERS KE0 to MN0 Ex)25V1,000F 7hE D55 E55 F55 F80 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 16 17 18 E MV E AAA A AA AAA M AAA N KE0 to MN0 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,100F:101) Taping*Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,100V:101,450V:451) Series code Category Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 1,500 3.3 to 4.7 10 to 68 100 to 1,000 2,200 to 6,800 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1k 1.50 1.30 1.05 1.75 1.50 1.30 1.05 10k 1.75 1.40 1.08 2.30 1.75 1.40 1.08 100k 1.80 1.50 1.08 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 82 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Standard, 105 MVESeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (F) 22 33 47 100 220 330 470 680 1,000 1,500 2,200 2,200 3,300 3,300 4,700 4,700 6,800 6,800 22 33 47 100 150 220 330 470 1,000 2,200 2,200 3,300 3,300 4,700 4,700 10 22 33 47 100 150 220 330 470 680 1,000 1,000 2,200 2,200 3,300 3,300 10 22 33 47 100 150 220 330 470 1,000 1,000 2,200 2,200 4.7 10 22 47 100 150 220 Size code tan D55 E55 E55 F55 F80 HA0 HA0 HA0 JA0 JA0 KE0 LH0 KG5 MH0 LN0 MH0 LN0 MN0 E55 E55 F55 F55 F80 F80 HA0 HA0 JA0 KG5 LH0 LH0 MH0 LN0 MN0 D55 E55 F55 F55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 E55 F55 F55 F55 F80 HA0 HA0 JA0 JA0 LH0 MH0 LN0 MN0 D55 E55 F55 F80 F80 HA0 JA0 0.30 0.30 0.30 0.30 0.45 0.40 0.45 0.45 0.40 0.45 0.40 0.40 0.42 0.42 0.44 0.44 0.48 0.48 0.24 0.24 0.24 0.30 0.35 0.35 0.35 0.35 0.35 0.36 0.36 0.38 0.38 0.40 0.40 0.20 0.20 0.20 0.20 0.26 0.28 0.28 0.28 0.28 0.28 0.30 0.30 0.32 0.32 0.34 0.34 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.16 0.18 0.26 0.26 0.28 0.28 0.14 0.14 0.14 0.16 0.16 0.16 0.16 is not solvent resistant. Rated ripple current (mArms/ 105, 120Hz) Part No. 22 34 38 69 120 290 320 340 410 550 680 840 850 1,000 1,200 1,200 1,200 1,350 30 34 48 69 100 120 290 320 410 750 850 1,000 1,100 1,300 1,350 17 30 45 48 69 100 120 290 320 470 550 650 950 1,000 1,200 1,200 27 44 50 60 100 240 320 450 490 820 880 1,250 1,300 16 27 44 80 100 260 375 EMVE6R3ADA220MD55G EMVE6R3ADA330ME55G EMVE6R3ADA470ME55G EMVE6R3ADA101MF55G EMVE6R3ADA221MF80G EMVE6R3ADA331MHA0G EMVE6R3ADA471MHA0G EMVE6R3ADA681MHA0G EMVE6R3ADA102MJA0G EMVE6R3ADA152MJA0G EMVE6R3ARA222MKE0S EMVE6R3DA222MLH0S EMVE6R3ARA332MKG5S EMVE6R3DA332MMH0S EMVE6R3DA472MLN0S EMVE6R3DA472MMH0S EMVE6R3DA682MLN0S EMVE6R3DA682MMN0S EMVE100ADA220ME55G EMVE100ADA330ME55G EMVE100ADA470MF55G EMVE100ADA101MF55G EMVE100ADA151MF80G EMVE100ADA221MF80G EMVE100ADA331MHA0G EMVE100ADA471MHA0G EMVE100ADA102MJA0G EMVE100ARA222MKG5S EMVE100DA222MLH0S EMVE100DA332MLH0S EMVE100DA332MMH0S EMVE100DA472MLN0S EMVE100DA472MMN0S EMVE160ADA100MD55G EMVE160ADA220ME55G EMVE160ADA330MF55G EMVE160ADA470MF55G EMVE160ADA101MF55G EMVE160ADA151MF80G EMVE160ADA221MF80G EMVE160ADA331MHA0G EMVE160ADA471MHA0G EMVE160ADA681MJA0G EMVE160ARA102MKE0S EMVE160DA102MLH0S EMVE160DA222MLH0S EMVE160DA222MMH0S EMVE160DA332MLN0S EMVE160DA332MMH0S EMVE250ADA100ME55G EMVE250ADA220MF55G EMVE250ADA330MF55G EMVE250ADA470MF55G EMVE250ADA101MF80G EMVE250ADA151MHA0G EMVE250ADA221MHA0G EMVE250ADA331MJA0G EMVE250ADA471MJA0G EMVE250DA102MLH0S EMVE250DA102MMH0S EMVE250DA222MLN0S EMVE250DA222MMN0S EMVE350ADA4R7MD55G EMVE350ADA100ME55G EMVE350ADA220MF55G EMVE350ADA470MF80G EMVE350ADA101MF80G EMVE350ADA151MHA0G EMVE350ADA221MJA0G WV (Vdc) 35 50 63 100 160 200 250 400 450 Cap (F) 330 470 470 1,000 1,000 2,200 1.0 2.2 3.3 4.7 10 33 47 100 220 330 330 470 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 220 330 330 470 470 22 33 47 68 100 100 220 220 330 33 47 68 68 100 10 22 33 47 47 68 4.7 10 22 33 33 47 4.7 10 22 3.3 4.7 10 22 Size code tan JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 D55 E55 F55 F80 F80 HA0 JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 E55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 HA0 JA0 KE0 KE0 KE0 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MH0 LN0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 KG5 LH0 LN0 MH0 MN0 KG5 LH0 MN0 KE0 KG5 LH0 MN0 0.16 0.22 0.22 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.18 0.18 0.18 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/ 105, 120Hz) 450 520 650 750 1,000 1,450 8.0 12 15 20 32 65 80 230 375 500 600 700 750 1,200 8.0 12 17 22 32 58 140 170 310 470 560 700 750 900 900 100 150 250 300 380 450 750 750 980 95 260 320 320 380 80 110 220 270 270 330 65 105 180 230 230 280 50 85 130 40 50 85 130 Part No. EMVE350ADA331MJA0G EMVE350ARA471MKE0S EMVE350DA471MLH0S EMVE350DA102MLH0S EMVE350DA102MMH0S EMVE350DA222MMN0S EMVE500ADA1R0MD55G EMVE500ADA2R2MD55G EMVE500ADA3R3MD55G EMVE500ADA4R7ME55G EMVE500ADA100MF55G EMVE500ADA330MF80G EMVE500ADA470MF80G EMVE500ADA101MHA0G EMVE500ADA221MJA0G EMVE500ARA331MKE0S EMVE500DA331MLH0S EMVE500DA471MLH0S EMVE500DA471MMH0S EMVE500DA102MMN0S EMVE630ADA1R0MD55G EMVE630ADA2R2MD55G EMVE630ADA3R3ME55G EMVE630ADA4R7MF55G EMVE630ADA100MF55G EMVE630ADA220MF80G EMVE630ADA330MHA0G EMVE630ADA470MHA0G EMVE630ADA101MJA0G EMVE630ARA221MKE0S EMVE630DA221MLH0S EMVE630DA331MLH0S EMVE630DA331MMH0S EMVE630DA471MLN0S EMVE630DA471MMH0S EMVE101ADA220MHA0G EMVE101ADA330MJA0G EMVE101ARA470MKE0S EMVE101ARA680MKE0S EMVE101ARA101MKE0S EMVE101DA101MLH0S EMVE101DA221MLN0S EMVE101DA221MMH0S EMVE101DA331MMN0S EMVE161ARA330MKE0S EMVE161DA470MLH0S EMVE161DA680MLN0S EMVE161DA680MMH0S EMVE161DA101MLN0S EMVE201ARA100MKE0S EMVE201ARA220MKG5S EMVE201DA330MLH0S EMVE201DA470MLN0S EMVE201DA470MMH0S EMVE201DA680MMN0S EMVE251ARA4R7MKE0S EMVE251ARA100MKG5S EMVE251DA220MLH0S EMVE251DA330MLN0S EMVE251DA330MMH0S EMVE251DA470MMN0S EMVE401ARA4R7MKG5S EMVE401DA100MLH0S EMVE401DA220MMN0S EMVE451ARA3R3MKE0S EMVE451ARA4R7MKG5S EMVE451DA100MLH0S EMVE451DA220MMN0S : Enter the appropriate terminal code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 83 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZR - Low ESR, 105 New! Series MZR Downsizing and Lower ESR, 2,000hours at 105 Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200F Solvent resistant type Vibration resistance structure RoHS Compliant Downsized MZJ P86 SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105 6.3 to 35Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V (at 20, 120Hz) tan(Max.) 0.26 0.19 0.16 0.14 0.12 0.10 Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V (at 120Hz) Z(-25)/Z(+20) 2 2 2 2 2 2 Z(-40)/Z(+20) 3 3 3 3 3 3 Z(-55)/Z(+20) 4 4 4 3 3 3 The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 305 seconds through a protective resistor (as required for RC=0.10.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 7.2V 12V 18V 29V 40V 57V Surge voltage (Vdc) Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. DIMENSIONS [mm] Terminal Code : A Size code : F80 to JA0 Code : G(Vibration resistant structure) Size code : HA0 and JA0 Size code 0.3max. L0.3 (Note) C B A L 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 3.1 4.5 A0.2 L0.5 A0.2 D 6.3 8 10 P C0.2 B0.2 D0.5 P C0.2 W F80 HA0 JA0 W 0.3max. Vent for JA0 B0.2 D0.5 Vent for JA0 Terminal Note : L0.5 for HA0 and JA0 : Dummy terminals MARKING EX) 35V330F 3Q 330 VZR Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 84 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MZRSeries New! TM AIchip Low ESR, 105 - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ R AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 220F:221, 470F:471) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" STANDARD RATINGS WV (Vdc) Cap (F) 680 1,500 2,200 470 1,000 1,500 330 680 1,000 220 470 820 150 330 560 100 220 330 6.3 10 16 25 35 50 Size code tan ESR ( max./20, 100kHz) Rated ripple current (mArms/105, 100kHz) Part No. F80 HA0 JA0 F80 HA0 JA0 F80 HA0 JA0 F80 HA0 JA0 F80 HA0 JA0 F80 HA0 JA0 0.26 0.26 0.26 0.19 0.19 0.19 0.16 0.16 0.16 0.14 0.14 0.14 0.12 0.12 0.12 0.10 0.10 0.10 0.16 0.08 0.06 0.16 0.08 0.06 0.16 0.08 0.06 0.16 0.08 0.06 0.16 0.08 0.06 0.34 0.18 0.12 600 850 1,190 600 850 1,190 600 850 1,190 600 850 1,190 600 850 1,190 350 670 900 EMZR6R3ADA681MF80G EMZR6R3DA152MHA0G EMZR6R3DA222MJA0G EMZR100ADA471MF80G EMZR100DA102MHA0G EMZR100DA152MJA0G EMZR160ADA331MF80G EMZR160DA681MHA0G EMZR160DA102MJA0G EMZR250ADA221MF80G EMZR250DA471MHA0G EMZR250DA821MJA0G EMZR350ADA151MF80G EMZR350DA331MHA0G EMZR350DA561MJA0G EMZR500ADA101MF80G EMZR500DA221MHA0G EMZR500DA331MJA0G : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 100 to 150 220 to 560 680 to 2,200 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 85 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low ESR, 105 MZJ - Series Lower ESR, 2,000 hours at 105 Rated voltage range : 6.3 to 35V Nominal capacitance range : 10 to 1,800F Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant MZJ Lower ESR MZA P88 SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105 6.3 to 35Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tan(Max.) 0.26 0.19 0.16 0.14 0.12 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V Z(-25)/Z(+20) 2 2 2 2 2 Z(-40)/Z(+20) 3 3 3 3 3 Z(-55)/Z(+20) 4 4 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 305 seconds through a protective resistor (as required for RC=0.10.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V Surge voltage (Vdc) 7.2V 12V 18V 29V 40V Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. DIMENSIONS [mm] Terminal Terminal Size Size B0.2 D0.5 P C0.2 0.3max. L0.3 (Note) W 0.3max. Vent for JA0 W B0.2 D0.5 Vent for JA0 Code : G(Vibration resistant structure) code : HA0 and JA0 Size code D61 E61 F61 F80 HA0 JA0 D 4 5 6.3 6.3 8 10 C B A L 5.8 4.3 4.3 5.1 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 A0.2 L0.5 A0.2 P C0.2 Code : A code : D61 to JA0 Note : L0.5 for HA0 and JA0 : Dummy terminals MARKING EX) 35V10F 9j 10 VZJ Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 86 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MZJSeries TM AIchip Low ESR, 105 - PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ J AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100, 1,000F:102) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" STANDARD RATINGS WV (Vdc) Cap (F) (47) 100 220 330 1,000 1,500 1,800 (33) 150 680 1,000 1,200 (22) 47 100 150 220 470 680 820 (10) 22 33 33 47 68 100 330 470 560 (10) 22 33 47 68 100 100 150 220 330 390 6.3 10 16 25 35 Size code tan ESR ( max./20, 100kHz) Rated ripple current (mArms/105, 100kHz) Part No. (D61) E61 F61 F80 HA0 JA0 JA0 (D61) F61 HA0 JA0 JA0 (D61) E61 F61 F80 F80 HA0 JA0 JA0 (D61) E61 E61 F61 F61 F61 F80 HA0 JA0 JA0 (D61) E61 F61 F61 F61 F80 HA0 HA0 HA0 JA0 JA0 (0.26) 0.26 0.26 0.26 0.26 0.26 0.26 (0.19) 0.19 0.19 0.19 0.19 (0.16) 0.16 0.16 0.16 0.16 0.16 0.16 0.16 (0.14) 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 (0.12) 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 (0.85) 0.36 0.26 0.16 0.08 0.06 0.06 (0.85) 0.26 0.08 0.06 0.06 (0.85) 0.36 0.26 0.16 0.16 0.08 0.06 0.06 (0.85) 0.36 0.36 0.26 0.26 0.26 0.16 0.08 0.06 0.06 (0.85) 0.36 0.26 0.26 0.26 0.16 0.08 0.08 0.08 0.06 0.06 (160) 240 300 600 850 1,190 1,190 (160) 300 850 1,190 1,190 (160) 240 300 600 600 850 1,190 1,190 (160) 240 240 300 300 300 600 850 1,190 1,190 (160) 240 300 300 300 600 850 850 850 1,190 1,190 (EMZJ6R3ADA470MD61G) EMZJ6R3ADA101ME61G EMZJ6R3ADA221MF61G EMZJ6R3ADA331MF80G EMZJ6R3DA102MHA0G EMZJ6R3DA152MJA0G EMZJ6R3DA182MJA0G (EMZJ100ADA330MD61G) EMZJ100ADA151MF61G EMZJ100DA681MHA0G EMZJ100DA102MJA0G EMZJ100DA122MJA0G (EMZJ160ADA220MD61G) EMZJ160ADA470ME61G EMZJ160ADA101MF61G EMZJ160ADA151MF80G EMZJ160ADA221MF80G EMZJ160DA471MHA0G EMZJ160DA681MJA0G EMZJ160DA821MJA0G (EMZJ250ADA100MD61G) EMZJ250ADA220ME61G EMZJ250ADA330ME61G EMZJ250ADA330MF61G EMZJ250ADA470MF61G EMZJ250ADA680MF61G EMZJ250ADA101MF80G EMZJ250DA331MHA0G EMZJ250DA471MJA0G EMZJ250DA561MJA0G (EMZJ350ADA100MD61G) EMZJ350ADA220ME61G EMZJ350ADA330MF61G EMZJ350ADA470MF61G EMZJ350ADA680MF61G EMZJ350ADA101MF80G EMZJ350DA101MHA0G EMZJ350DA151MHA0G EMZJ350DA221MHA0G EMZJ350DA331MJA0G EMZJ350DA391MJA0G : Enter the appropriate terminal code. : Second standard RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 10 to 150 220 to 560 680 to 1,800 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 87 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZA - Series Low impedance, 105 MZA Endurance : 2,000 to 5,000 hours at 105 Low impedance Solvent resistant type(see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant Lower Z MVY P90 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 100Vdc (at 20, 120Hz) 20%(M) I=0.01CV or 3A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V D61 to JA0 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 tan(Max.) KE0 to MN0 0.16 0.14 0.12 0.12 0.10 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 2 2 2 2 2 2 2 2 2 Z(-40)/Z(+20) 3 3 3 3 3 3 3 3 3 Z(-55)/Z(+20) 4 4 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified time at 105. D61 to JA0 : 2,000 hours Time KE0 to MN0 : 5,000 hours Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance DIMENSIONS [mm] Terminal Terminal Size Size Vent (Except HA0) D0.5 P C0.2 B0.2 D0.5 W 0.3max. L0.3 (Note) A0.2 L0.5 A0.2 D61 E61 F61 F80 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 W 0.3max. B0.2 Vent for JA0 (Except D61 to HA0) Code : G(Vibration resistant structure) code : HA0 to MN0 Size code P C0.2 Code : A code : D61 to MN0 Note : L0.5 for HA0 and MN0 : Dummy terminals D 4 5 6.3 6.3 8 10 12.5 12.5 16 16 18 18 L 5.8 5.8 5.8 7.7 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 B 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 A 4.3 5.3 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 MARKING 18 E MZA AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping*Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category 0V MZA 2j 220 CZA Rated 1000 25V voltage symbol (D61 to JA0) Rated voltage (Vdc) Symbol Please refer to "Product code guide (surface mount type)" KE0 to MN0 EX) 25V1,000F D61 to JA0 EX) 16V220F 6.3 j 10 A 16 C 25 E 35 V 50 H 63 J 80 K Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 88 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 105 MZASeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (F) Size code 22 D61 47 D61 47 E61 100 E61 100 F61 220 F61 330 F80 470 HA0 1,000 HA0 1,500 JA0 22 D61 33 D61 33 E61 220 F80 330 HA0 470 HA0 680 HA0 1,000 JA0 10 D61 22 D61 22 E61 47 E61 47 F61 100 F61 220 F80 330 HA0 470 HA0 680 JA0 10 D61 22 E61 33 E61 33 F61 47 F61 100 F80 220 HA0 330 HA0 470 JA0 1,000 KE0 1,300 KG5 1,800 LH0 2,400 MH0 3,000 LN0 3,900 MN0 4.7 D61 10 D61 10 E61 22 E61 33 F61 47 F61 100 F80 100 HA0 220 HA0 Impedance Rated ripple ( max./ current 100kHz) (mArms/ 20 -40 105 ,100kHz) 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 1.35 1.35 0.70 0.34 0.16 0.16 0.16 0.08 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 0.060 0.056 0.047 0.045 0.034 0.032 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0.30 0.28 0.24 0.23 0.17 0.16 - - - - - - - - - 90 90 160 160 240 240 280 600 600 850 90 90 160 280 600 600 600 850 90 90 160 160 240 240 280 600 600 850 90 160 160 240 240 280 600 600 850 1,320 1,470 1,820 2,060 2,400 2,640 90 90 160 160 240 240 280 600 600 WV Part No. (Vdc) EMZA6R3ADA220MD61G EMZA6R3ADA470MD61G EMZA6R3ADA470ME61G EMZA6R3ADA101ME61G EMZA6R3ADA101MF61G EMZA6R3ADA221MF61G EMZA6R3ADA331MF80G EMZA6R3 DA471MHA0G EMZA6R3 DA102MHA0G EMZA6R3 DA152MJA0G EMZA100ADA220MD61G EMZA100ADA330MD61G EMZA100ADA330ME61G EMZA100ADA221MF80G EMZA100 DA331MHA0G EMZA100 DA471MHA0G EMZA100 DA681MHA0G EMZA100 DA102MJA0G EMZA160ADA100MD61G EMZA160ADA220MD61G EMZA160ADA220ME61G EMZA160ADA470ME61G EMZA160ADA470MF61G EMZA160ADA101MF61G EMZA160ADA221MF80G EMZA160 DA331MHA0G EMZA160 DA471MHA0G EMZA160 DA681MJA0G EMZA250ADA100MD61G EMZA250ADA220ME61G EMZA250ADA330ME61G EMZA250ADA330MF61G EMZA250ADA470MF61G EMZA250ADA101MF80G EMZA250 DA221MHA0G EMZA250 DA331MHA0G EMZA250 DA471MJA0G EMZA250 RA102MKE0S EMZA250 RA132MKG5S EMZA250 DA182MLH0S EMZA250 DA242MMH0S EMZA250 DA302MLN0S EMZA250 DA392MMN0S EMZA350ADA4R7MD61G EMZA350ADA100MD61G EMZA350ADA100ME61G EMZA350ADA220ME61G EMZA350ADA330MF61G EMZA350ADA470MF61G EMZA350ADA101MF80G EMZA350 DA101MHA0G EMZA350 DA221MHA0G 35 50 63 80 100 Cap (F) Size code Impedance Rated ripple ( max./ current 100kHz) (mArms/ 20 -40 105 ,100kHz) 330 620 820 1,200 1,600 1,800 2,400 4.7 10 10 22 33 47 100 220 330 430 620 820 1,000 1,300 4.7 10 22 33 47 68 100 240 300 430 560 680 910 3.3 4.7 10 22 33 47 150 220 330 430 470 680 110 130 200 270 330 430 JA0 KE0 KG5 LH0 MH0 LN0 MN0 D61 E61 F61 F61 F80 F80 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 E61 F61 F80 HA0 HA0 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 E61 F61 F80 HA0 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 0.08 0.060 0.056 0.047 0.045 0.034 0.032 2.9 1.52 0.88 0.88 0.68 0.68 0.34 0.18 0.11 0.10 0.087 0.087 0.050 0.050 4.8 2.2 2.1 0.70 0.70 0.70 0.45 0.19 0.17 0.15 0.12 0.085 0.070 5.0 3.0 2.4 1.3 1.3 0.70 0.22 0.17 0.15 0.12 0.085 0.070 0.28 0.21 0.18 0.15 0.11 0.091 - 0.30 0.28 0.24 0.23 0.17 0.16 - - - - - - - - 0.55 0.50 0.44 0.44 0.25 0.25 - - - - - - - 1.54 1.19 1.05 0.84 0.58 0.49 - - - - - - 1.54 1.19 1.05 0.84 0.58 0.49 2.24 1.68 1.44 1.2 0.88 0.73 850 1,320 1,470 1,820 2,060 2,400 2,640 60 85 165 165 195 195 350 670 980 1,090 1,320 1,420 1,910 2,180 50 80 120 250 250 250 400 880 1,000 1,220 1,430 1,790 1,960 25 40 60 130 130 200 810 1,000 1,220 1,430 1,790 1,960 740 900 1,090 1,280 1,580 1,690 Part No. EMZA350 DA331MJA0G EMZA350 RA621MKE0S EMZA350 RA821MKG5S EMZA350 DA122MLH0S EMZA350 DA162MMH0S EMZA350 DA182MLN0S EMZA350 DA242MMN0S EMZA500ADA4R7MD61G EMZA500ADA100ME61G EMZA500ADA100MF61G EMZA500ADA220MF61G EMZA500ADA330MF80G EMZA500ADA470MF80G EMZA500 DA101MHA0G EMZA500 DA221MJA0G EMZA500 RA331MKE0S EMZA500 RA431MKG5S EMZA500 DA621MLH0S EMZA500 DA821MMH0S EMZA500 DA102MLN0S EMZA500 DA132MMN0S EMZA630ADA4R7ME61G EMZA630ADA100MF61G EMZA630ADA220MF80G EMZA630 DA330MHA0G EMZA630 DA470MHA0G EMZA630 DA680MHA0G EMZA630 DA101MJA0G EMZA630 RA241MKE0S EMZA630 RA301MKG5S EMZA630 DA431MLH0S EMZA630 DA561MMH0S EMZA630 DA681MLN0S EMZA630 DA911MMN0S EMZA800ADA3R3ME61G EMZA800ADA4R7MF61G EMZA800ADA100MF80G EMZA800 DA220MHA0G EMZA800 DA330MHA0G EMZA800 DA470MJA0G EMZA800 RA151MKE0S EMZA800 RA221MKG5S EMZA800 DA331MLH0S EMZA800 DA431MMH0S EMZA800 DA471MLN0S EMZA800 DA681MMN0S EMZA101 RA111MKE0S EMZA101 RA131MKG5S EMZA101 DA201MLH0S EMZA101 DA271MMH0S EMZA101 DA331MLN0S EMZA101 DA431MMN0S : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Size code D61 to JA0 KE0 to MN0 Capacitance(F) Frequency(Hz) 3.3 to 4.7 10 to 100 220 to 470 680 to 1,500 110 to 200 220 to 620 680 to 1,800 2,400 to 3,000 3,900 120 0.35 0.40 0.50 0.60 0.40 0.50 0.60 0.75 0.85 1k 0.70 0.75 0.85 0.87 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.90 0.94 0.95 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 89 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVY - Series Low impedance, 105 MZA P88 Lower Z Endurance : 1,000 to 5,000 hours at 105 Low impedance For digital equipment, especially DC-DC converters Solvent resistant type except 80 & 100Vdc (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant MVY Longer life MLA P98 Lower Z MVE P82 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 (6.3 to 63Vdc) -40 to +105 (80 & 100Vdc) 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V When nominal capacitance exceeds - 1,000F, add 0.02 to the value above D55 to F80 0.24 0.20 0.16 0.14 0.12 0.12 tan (Max.) HA0 & JA0 0.28 0.24 0.20 0.16 0.14 0.12 - for each 1,000F increase. (at 20, 120Hz) KE0 to MN0 0.26 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.10 Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V D55 to JA0 3 2 2 2 2 2 Z(-40)/Z(+20) KE0 to MN0 10 8 6 4 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified ime at 105. D55 to F80 : 1,000 hours Time HA0 & JA0 : 2,000 hours KE0 to MN0 : 5,000 hours Rated voltage 6.3Vdc (D55 to JA0) 6.3 to 100Vdc Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3Vdc (D55 to JA0) 6.3 to 100Vdc Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal Terminal Size Size Vent (Except HA0) 0.3max. L0.3 (Note) D0.5 P C0.2 B0.2 D0.5 W 0.3max. A0.2 L0.5 A0.2 Note : L0.5 for HA0 to MN0 : Dummy terminals PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 W B0.2 Vent (Except D55 to HA0) Code : G(Vibration resistant structure) code : HA0 to MN0 Size code P C0.2 Code : A code : D55 to MN0 13 14 15 16 17 D55 E55 F55 F61 F80 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 D 4 5 6.3 6.3 6.3 8 10 12.5 12.5 16 16 18 18 L 5.2 5.2 5.2 5.8 7.7 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 A 4.3 5.3 6.6 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 4.3 5.3 6.6 6.6 6.6 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 MARKING 18 E MV Y AAA A DA AAA M AAA G D55 to JA0 EX) 6.3V100F Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping*Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category 7hY 100 6.3V KE0 to MN0 EX) 16V1,000F 0V MVY 1000 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 90 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVYSeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Low impedance, 105 Cap (F) Size code 22 33 47 100 220 330 470 680 1,000 1,500 2,200 2,200 3,300 3,300 4,700 4,700 6,800 6,800 8,200 22 33 47 100 220 330 470 680 1,000 2,200 2,200 3,300 3,300 4,700 4,700 6,800 10 22 33 47 100 220 330 470 680 1,000 1,000 2,200 2,200 3,300 3,300 4,700 10 22 33 47 100 220 D55 E55 E55 F55 F55 F80 HA0 HA0 HA0 JA0 KE0 LH0 KG5 MH0 LN0 MH0 LN0 MN0 MN0 E55 E55 F55 F55 F80 HA0 HA0 JA0 JA0 KG5 LH0 LH0 MH0 LN0 MN0 MN0 D55 E55 F55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 MN0 E55 F55 F55 F55 F80 HA0 is not solvent resistant (80/100Vdc). Rated ripple Impedance current ( max./20, (mArms/105, 100kHz) 100kHz) 3.0 1.8 1.8 1.0 1.0 0.34 0.30 0.30 0.30 0.15 0.070 0.054 0.060 0.054 0.038 0.054 0.038 0.038 0.038 1.8 1.8 1.0 1.0 0.34 0.30 0.30 0.15 0.15 0.060 0.054 0.054 0.054 0.038 0.038 0.038 3.0 1.8 1.0 1.0 1.0 0.34 0.30 0.30 0.15 0.070 0.054 0.054 0.054 0.038 0.054 0.038 1.8 1.0 1.0 1.0 0.34 0.30 60 95 95 140 140 280 450 450 450 670 820 1,260 950 1,350 1,630 1,350 1,630 1,750 1,750 95 95 140 140 280 450 450 670 670 950 1,260 1,260 1,350 1,630 1,750 1,750 60 95 140 140 140 280 450 450 670 820 1,260 1,260 1,350 1,630 1,350 1,750 95 140 140 140 280 450 WV (Vdc) Part No. EMVY6R3ADA220MD55G EMVY6R3ADA330ME55G EMVY6R3ADA470ME55G EMVY6R3ADA101MF55G EMVY6R3ADA221MF55G EMVY6R3ADA331MF80G EMVY6R3DA471MHA0G EMVY6R3DA681MHA0G EMVY6R3DA102MHA0G EMVY6R3DA152MJA0G EMVY6R3RA222MKE0S EMVY6R3DA222MLH0S EMVY6R3RA332MKG5S EMVY6R3DA332MMH0S EMVY6R3DA472MLN0S EMVY6R3DA472MMH0S EMVY6R3DA682MLN0S EMVY6R3DA682MMN0S EMVY6R3DA822MMN0S EMVY100ADA220ME55G EMVY100ADA330ME55G EMVY100ADA470MF55G EMVY100ADA101MF55G EMVY100ADA221MF80G EMVY100DA331MHA0G EMVY100DA471MHA0G EMVY100DA681MJA0G EMVY100DA102MJA0G EMVY100RA222MKG5S EMVY100DA222MLH0S EMVY100DA332MLH0S EMVY100DA332MMH0S EMVY100DA472MLN0S EMVY100DA472MMN0S EMVY100DA682MMN0S EMVY160ADA100MD55G EMVY160ADA220ME55G EMVY160ADA330MF55G EMVY160ADA470MF55G EMVY160ADA101MF55G EMVY160ADA221MF80G EMVY160DA331MHA0G EMVY160DA471MHA0G EMVY160DA681MJA0G EMVY160RA102MKE0S EMVY160DA102MLH0S EMVY160DA222MLH0S EMVY160DA222MMH0S EMVY160DA332MLN0S EMVY160DA332MMH0S EMVY160DA472MMN0S EMVY250ADA100ME55G EMVY250ADA220MF55G EMVY250ADA330MF55G EMVY250ADA470MF55G EMVY250ADA101MF80G EMVY250DA221MHA0G : Enter the appropriate terminal code. 25 35 50 63 80 100 Cap (F) Size code 330 470 1,000 1,000 2,200 2,200 3,300 4.7 10 22 33 47 47 68 100 220 330 470 470 1,000 1,000 2,200 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 330 470 470 1,000 68 100 220 220 330 330 470 470 100 220 330 330 470 47 68 100 100 220 220 330 HA0 JA0 LH0 MH0 LN0 MN0 MN0 D55 E55 F55 F55 F55 F61 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 D55 E55 F55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 MN0 KE0 KE0 KE0 LH0 LH0 MH0 LN0 MH0 KE0 KG5 LN0 MH0 MN0 KE0 KE0 KE0 LH0 LN0 MH0 MN0 Rated ripple Impedance current ( max./20, (mArms/105, 100kHz) 100kHz) 0.30 0.15 0.054 0.054 0.038 0.038 0.038 3.0 1.8 1.0 1.0 1.0 1.0 0.34 0.30 0.30 0.15 0.070 0.054 0.054 0.054 0.038 5.0 5.0 5.0 3.0 2.0 2.0 0.60 0.60 0.60 0.60 0.30 0.11 0.087 0.087 0.087 0.050 0.19 0.19 0.19 0.12 0.12 0.12 0.085 0.12 0.33 0.26 0.16 0.24 0.16 0.33 0.33 0.33 0.24 0.16 0.24 0.16 450 670 1,260 1,350 1,630 1,750 1,750 60 95 140 140 140 140 280 450 450 670 820 1,260 1,260 1,350 1,750 30 30 30 50 70 70 170 170 300 300 500 650 900 900 1,060 1,520 500 500 500 845 845 905 1,100 905 450 550 900 700 950 450 450 450 650 900 700 950 Part No. EMVY250DA331MHA0G EMVY250DA471MJA0G EMVY250DA102MLH0S EMVY250DA102MMH0S EMVY250DA222MLN0S EMVY250DA222MMN0S EMVY250DA332MMN0S EMVY350ADA4R7MD55G EMVY350ADA100ME55G EMVY350ADA220MF55G EMVY350ADA330MF55G EMVY350ADA470MF55G EMVY350ADA470MF61G EMVY350ADA680MF80G EMVY350DA101MHA0G EMVY350DA221MHA0G EMVY350DA331MJA0G EMVY350RA471MKE0S EMVY350DA471MLH0S EMVY350DA102MLH0S EMVY350DA102MMH0S EMVY350DA222MMN0S EMVY500ADA1R0MD55G EMVY500ADA2R2MD55G EMVY500ADA3R3MD55G EMVY500ADA4R7ME55G EMVY500ADA100MF55G EMVY500ADA220MF55G EMVY500ADA330MF80G EMVY500ADA470MF80G EMVY500DA680MHA0G EMVY500DA101MHA0G EMVY500DA221MJA0G EMVY500RA331MKE0S EMVY500DA331MLH0S EMVY500DA471MLH0S EMVY500DA471MMH0S EMVY500DA102MMN0S EMVY630RA680MKE0S EMVY630RA101MKE0S EMVY630RA221MKE0S EMVY630DA221MLH0S EMVY630DA331MLH0S EMVY630DA331MMH0S EMVY630DA471MLN0S EMVY630DA471MMH0S EMVY800RA101MKE0S EMVY800RA221MKG5S EMVY800DA331MLN0S EMVY800DA331MMH0S EMVY800DA471MMN0S EMVY101RA470MKE0S EMVY101RA680MKE0S EMVY101RA101MKE0S EMVY101DA101MLH0S EMVY101DA221MLN0S EMVY101DA221MMH0S EMVY101DA331MMN0S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Size code D55 to JA0 KE0 to MN0 Capacitance(F) Frequency(Hz) 1.0 to 4.7 10 to 100 220 to 470 680 to 1,500 47 to 100 220 to 470 1,000 2,200 to 3,300 4,700 to 8,200 120 0.35 0.40 0.50 0.60 0.40 0.50 0.60 0.75 0.85 1k 0.70 0.75 0.85 0.87 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.90 0.94 0.95 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 91 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip Low impedance, 10000-hours-life, 105 MZF - Series Endurance : 10,000 hours at 105 Low impedance Rated voltage range : 6.3 to 50V Nominal capacitance range : 10 to 470F Suitable for high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MLA P98 Longer life MZE P94 Longer life MZF SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105 6.3 to 50Vdc 20%(M) I0.01CV or 3A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10)/Z(+20) 4 3 2 2 2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ F AAA A DA AAA M AAA G W 0.3max. L0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C0.2 B0.2 D0.5 (at 20,120Hz) PART NUMBERING SYSTEM Code : A Vent for JA0 A0.2 Note : L0.5 for HA0 and JA0 Size code E73 F73 F90 HA0 JA0 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 10,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20,120Hz) C B A L D 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" MARKING EX) 16V47F 4h 47 C ZF Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 92 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 10000-hours-life, 105 MZFSeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) 47 100 220 330 470 33 150 22 47 100 150 220 330 470 22 Rated ripple Impedance current Size code ( max./20, (mArms/105, 100kHz) 100kHz) E73 F73 F90 F90 HA0 E73 F73 E73 F73 F73 F90 F90 HA0 JA0 E73 2.2 1.1 1.0 1.0 0.22 2.2 1.1 2.2 1.1 1.1 1.0 1.0 0.22 0.16 2.2 95 140 230 230 600 95 140 95 140 140 230 230 600 850 95 Part No. WV (Vdc) EMZF6R3ADA470ME73G EMZF6R3ADA101MF73G EMZF6R3ADA221MF90G EMZF6R3ADA331MF90G EMZF6R3ADA471MHA0G EMZF100ADA330ME73G EMZF100ADA151MF73G EMZF160ADA220ME73G EMZF160ADA470MF73G EMZF160ADA101MF73G EMZF160ADA151MF90G EMZF160ADA221MF90G EMZF160ADA331MHA0G EMZF160ADA471MJA0G EMZF250ADA220ME73G 25 35 50 Cap (F) 33 47 100 220 330 10 10 22 22 33 47 100 220 47 100 Rated ripple Impedance current Size code ( max./20, (mArms/105, 100kHz) 100kHz) F73 F73 F90 HA0 JA0 E73 F73 E73 F73 F90 F90 HA0 JA0 HA0 JA0 1.1 1.1 1.0 0.22 0.16 2.2 1.1 2.2 1.1 1.0 1.0 0.22 0.16 0.53 0.35 140 140 230 600 850 95 140 95 140 230 230 600 850 350 670 Part No. EMZF250ADA330MF73G EMZF250ADA470MF73G EMZF250ADA101MF90G EMZF250ADA221MHA0G EMZF250ADA331MJA0G EMZF350ADA100ME73G EMZF350ADA100MF73G EMZF350ADA220ME73G EMZF350ADA220MF73G EMZF350ADA330MF90G EMZF350ADA470MF90G EMZF350ADA101MHA0G EMZF350ADA221MJA0G EMZF500ADA470MHA0G EMZF500ADA101MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 10 to 150 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 93 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 7000 to 8000-hours-life, 105 MZE - Series Endurance : 7,000 to 8,000 hours at 105 Low impedance Rated voltage range : 6.3 to 50V Nominal capacitance range : 10 to 470F Suitable for high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVY P90 Longer life MLA P98 Longer life MZE SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105 6.3 to 50Vdc 20%(M) I=0.01CV or 3A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10)/Z(+20) 4 3 2 2 2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ E AAA A DA AAA M AAA G W Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C0.2 B0.2 D0.5 (at 20,120Hz) PART NUMBERING SYSTEM :A 0.3max. L0.3 (Note) A0.2 Note : L0.5 for HA0 and JA0 Size code E73 F73 F90 HA0 JA0 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified time at 105. E73 & F73 : 7,000 hours Time F90 to JA0 : 8,000 hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal Code Vent for JA0 (at 20,120Hz) C B A L D 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" MARKING EX) 16V47F 4h 47 CZE Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 94 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 7000 to 8000-hours-life, 105 MZESeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Size code 47 100 220 330 470 33 150 22 47 100 150 220 330 470 22 E73 F73 F90 F90 HA0 E73 F73 E73 F73 F73 F90 F90 HA0 JA0 E73 Rated ripple Impedance current ( max./20, (mArms/105, 100kHz) 100kHz) 2.2 1.1 1.0 1.0 0.22 2.2 1.1 2.2 1.1 1.1 1.0 1.0 0.22 0.16 2.2 95 140 230 230 600 95 140 95 140 140 230 230 600 850 95 Part No. WV (Vdc) EMZE6R3ADA470ME73G EMZE6R3ADA101MF73G EMZE6R3ADA221MF90G EMZE6R3ADA331MF90G EMZE6R3ADA471MHA0G EMZE100ADA330ME73G EMZE100ADA151MF73G EMZE160ADA220ME73G EMZE160ADA470MF73G EMZE160ADA101MF73G EMZE160ADA151MF90G EMZE160ADA221MF90G EMZE160ADA331MHA0G EMZE160ADA471MJA0G EMZE250ADA220ME73G 25 35 50 Cap (F) Size code 33 47 100 220 330 10 10 22 22 33 47 100 220 47 100 F73 F73 F90 HA0 JA0 E73 F73 E73 F73 F90 F90 HA0 JA0 HA0 JA0 Rated ripple Impedance current ( max./20, (mArms/105, 100kHz) 100kHz) 1.1 1.1 1.0 0.22 0.16 2.2 1.1 2.2 1.1 1.0 1.0 0.22 0.16 0.53 0.35 140 140 230 600 850 95 140 95 140 230 230 600 850 350 670 Part No. EMZE250ADA330MF73G EMZE250ADA470MF73G EMZE250ADA101MF90G EMZE250ADA221MHA0G EMZE250ADA331MJA0G EMZE350ADA100ME73G EMZE350ADA100MF73G EMZE350ADA220ME73G EMZE350ADA220MF73G EMZE350ADA330MF90G EMZE350ADA470MF90G EMZE350ADA101MHA0G EMZE350ADA221MJA0G EMZE500ADA470MHA0G EMZE500ADA101MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 10 to 150 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 95 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 5000-hours-life, 105 MZK - Series Endurance : 5,000 hours at 105 Low impedance Rated voltage range : 6.3 to 35V Nominal capacitance range : 10 to 150F Suitable for high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVY P90 Longer life MZK SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105 6.3 to 35Vdc 20%(M) I=0.01CV or 3A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tan (Max.) 0.32 0.28 0.26 0.16 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V Z(-10)/Z(+20) 4 3 2 2 2 1 2 3 4 5 6 7 8 9 A0.2 A 5.3 6.6 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,35V:350) Series code Category P C0.2 B0.2 D0.5 L 5.8 5.8 10 E MZK AAA A DA AAA M AAA G 0.3max. L0.3 D 5 6.3 (at 20,120Hz) PART NUMBERING SYSTEM Code : A W Size code E61 F61 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 5,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20,120Hz) B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 Please refer to "Product code guide (surface mount type)" MARKING EX) 35V47F 9C 47 V ZK Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 96 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 5000-hours-life, 105 MZKSeries - STANDARD RATINGS WV (Vdc) Cap (F) Size code Impedance ( max./20, 100kHz) Rated ripple current (mArms/105, 100kHz) Part No. 6.3 10 100 150 33 47 100 68 10 10 22 22 33 47 E61 F61 E61 E61 F61 F61 E61 F61 E61 F61 F61 F61 2.2 1.1 2.2 2.2 1.1 1.1 2.2 1.1 2.2 1.1 1.1 1.1 95 140 95 95 140 140 95 140 95 140 140 140 EMZK6R3ADA101ME61G EMZK100ADA151MF61G EMZK160ADA330ME61G EMZK160ADA470ME61G EMZK160ADA101MF61G EMZK250ADA680MF61G EMZK350ADA100ME61G EMZK350ADA100MF61G EMZK350ADA220ME61G EMZK350ADA220MF61G EMZK350ADA330MF61G EMZK350ADA470MF61G 16 25 35 RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 6.3 to 35Vdc 120 0.40 1k 0.75 10k 0.90 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 97 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 105 MLA - Series Low impedance, long life Rated voltage 6.3 to 50V, Capacitance 10 to 1,000F Case size5x5.8L to 10x10L Suitable for applications requiring long life and low impedance such as equipment in continuous operation, industrial applications, etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVY P90 Longer life MLA SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 50Vdc (at 20, 120Hz) 20%(M) I=0.01CV or 3A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V E61 to F61 0.28 0.24 0.22 0.16 0.13 0.12 F80 0.32 0.27 0.24 0.16 0.13 0.12 tan (Max.) HA0 to JA0 0.28 0.24 0.22 0.16 0.13 0.12 (at 20, 120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 4 3 2 2 2 2 Z(-40)/Z(+20) 10 7 5 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 3,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life DIMENSIONS [mm] Terminal MARKING Code : A Vent for JA0 Size code E61 F61 F80 HA0 JA0 P C0.2 B0.2 D0.5 W 0.3max. L0.3 (Note) D 5 6.3 6.3 8 10 C B A L 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 EX) 16V100F 4R 100 CLA A0.2 Note : L0.5 for HA0 and JA0 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Rated 18 E MLA AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category voltage symbol Rated voltage (Vdc) Symbol j 6.3 A 10 C 16 E 25 V 35 H 50 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 98 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MLASeries TM AIchip Low impedance, 105 - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Rated ripple Impedance current Size tan ( max./20, code (mArms/105, 100kHz) 100kHz) 47 100 150 220 330 330 470 1,000 33 47 100 150 220 220 330 470 22 33 47 100 100 150 220 220 330 470 470 10 22 22 E61 F61 F61 F80 F80 HA0 HA0 JA0 E61 F61 F61 F61 F80 HA0 HA0 HA0 E61 F61 F61 F61 F80 F80 F80 HA0 HA0 HA0 JA0 E61 E61 F61 0.28 0.28 0.28 0.32 0.32 0.28 0.28 0.28 0.24 0.24 0.24 0.24 0.27 0.24 0.24 0.24 0.22 0.22 0.22 0.22 0.24 0.24 0.24 0.22 0.22 0.22 0.22 0.16 0.16 0.16 1.30 0.70 0.70 0.70 0.70 0.16 0.16 0.08 1.30 0.70 0.70 0.70 0.70 0.16 0.16 0.16 1.30 0.70 0.70 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.08 1.30 1.30 0.70 95 140 140 230 230 600 600 850 95 140 140 140 230 600 600 600 95 140 140 140 230 230 230 600 600 600 850 95 95 140 Part No. WV (Vdc) EMLA6R3ADA470ME61G EMLA6R3ADA101MF61G EMLA6R3ADA151MF61G EMLA6R3ADA221MF80G EMLA6R3ADA331MF80G EMLA6R3ADA331MHA0G EMLA6R3ADA471MHA0G EMLA6R3ADA102MJA0G EMLA100ADA330ME61G EMLA100ADA470MF61G EMLA100ADA101MF61G EMLA100ADA151MF61G EMLA100ADA221MF80G EMLA100ADA221MHA0G EMLA100ADA331MHA0G EMLA100ADA471MHA0G EMLA160ADA220ME61G EMLA160ADA330MF61G EMLA160ADA470MF61G EMLA160ADA101MF61G EMLA160ADA101MF80G EMLA160ADA151MF80G EMLA160ADA221MF80G EMLA160ADA221MHA0G EMLA160ADA331MHA0G EMLA160ADA471MHA0G EMLA160ADA471MJA0G EMLA250ADA100ME61G EMLA250ADA220ME61G EMLA250ADA220MF61G 25 35 50 Cap (F) 33 47 47 100 100 150 220 330 330 470 10 22 33 33 47 100 100 150 220 220 330 10 22 33 47 47 100 100 150 220 Rated ripple Impedance current Size tan ( max./20, code (mArms/105, 100kHz) 100kHz) F61 F61 F80 F80 HA0 HA0 HA0 HA0 JA0 JA0 E61 F61 F61 F80 F80 F80 HA0 HA0 HA0 JA0 JA0 F61 F61 F80 F80 HA0 HA0 JA0 JA0 JA0 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.16 0.08 0.08 1.30 0.70 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.08 0.08 2.00 2.00 1.60 1.60 0.34 0.34 0.18 0.18 0.18 140 140 230 230 600 600 600 600 850 850 95 140 140 230 230 230 600 600 600 850 850 70 70 100 100 350 350 670 670 670 Part No. EMLA250ADA330MF61G EMLA250ADA470MF61G EMLA250ADA470MF80G EMLA250ADA101MF80G EMLA250ADA101MHA0G EMLA250ADA151MHA0G EMLA250ADA221MHA0G EMLA250ADA331MHA0G EMLA250ADA331MJA0G EMLA250ADA471MJA0G EMLA350ADA100ME61G EMLA350ADA220MF61G EMLA350ADA330MF61G EMLA350ADA330MF80G EMLA350ADA470MF80G EMLA350ADA101MF80G EMLA350ADA101MHA0G EMLA350ADA151MHA0G EMLA350ADA221MHA0G EMLA350ADA221MJA0G EMLA350ADA331MJA0G EMLA500ADA100MF61G EMLA500ADA220MF61G EMLA500ADA330MF80G EMLA500ADA470MF80G EMLA500ADA470MHA0G EMLA500ADA101MHA0G EMLA500ADA101MJA0G EMLA500ADA151MJA0G EMLA500ADA221MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 10 to 150 220 to 470 1,000 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 99 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 10000-hours-life, 105 MLF - Series Endurance : 10,000 hours at 105 Rated voltage range : 6.3 to 50V Nominal capacitance range : 1.0 to 1,000F Suitable for high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVL P105 Longer life MLE P102 Longer life MLF SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105 6.3 to 50Vdc 20%(M) I=0.03CV or 4A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10)/Z(+20) 4 3 2 2 2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E ML F AAA A DA AAA M AAA G W Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C0.2 B0.2 D0.5 (at 20,120Hz) PART NUMBERING SYSTEM Code : A Vent for JA0 0.3max. A0.2 L0.3 (Note) Note : L0.5 for HA0 and JA0 Size code D73 E73 F73 F90 HA0 JA0 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 10,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20,120Hz) C B A L D 7.0 4.3 4.3 5.1 4 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" MARKING EX) 16V47F 4h 47 C LF Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 100 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 10000-hours-life, 105 MLFSeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Size code Rated ripple current (mArms/105, 120Hz) Part No. 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 D73 E73 F73 F90 HA0 JA0 E73 HA0 D73 E73 F73 F90 JA0 F73 F90 HA0 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 EMLF6R3ADA220MD73G EMLF6R3ADA470ME73G EMLF6R3ADA101MF73G EMLF6R3ADA221MF90G EMLF6R3ADA331MHA0G EMLF6R3ADA102MJA0G EMLF100ADA330ME73G EMLF100ADA221MHA0G EMLF160ADA100MD73G EMLF160ADA220ME73G EMLF160ADA470MF73G EMLF160ADA101MF90G EMLF160ADA471MJA0G EMLF250ADA330MF73G EMLF250ADA470MF90G EMLF250ADA101MHA0G WV (Vdc) 35 50 Cap (F) Size code 1.0 2.2 3.3 4.7 4.7 10 10 22 22 33 220 33 47 100 D73 D73 D73 D73 E73 E73 F73 F73 F90 F90 JA0 HA0 HA0 JA0 Rated ripple current (mArms/105, 120Hz) 6.2 11 14 15 19 25 30 42 49 57 216 77 92 151 Part No. EMLF350ADA1R0MD73G EMLF350ADA2R2MD73G EMLF350ADA3R3MD73G EMLF350ADA4R7MD73G EMLF350ADA4R7ME73G EMLF350ADA100ME73G EMLF350ADA100MF73G EMLF350ADA220MF73G EMLF350ADA220MF90G EMLF350ADA330MF90G EMLF350ADA221MJA0G EMLF500ADA330MHA0G EMLF500ADA470MHA0G EMLF500ADA101MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 101 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 7000 to 8000-hours-life, 105 MLE - Series Endurance : 7,000 to 8,000 hours at 105 Rated voltage range : 6.3 to 50V Nominal capacitance range : 1.0 to 1,000F Suitable for high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVJ P107 Longer life MVL P105 Longer life MLE SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105 6.3 to 50Vdc 20%(M) I=0.03CV or 4A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10)/Z(+20) 4 3 2 2 2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E ML E AAA A DA AAA M AAA G W 0.3max. L0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C0.2 B0.2 D0.5 (at 20,120Hz) PART NUMBERING SYSTEM Code : A Vent for JA0 A0.2 Note : L0.5 for HA0 and JA0 Size code D73 E73 F73 F90 HA0 JA0 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified time at 105. D73 to F73 : 7,000 hours Time F90 to JA0 : 8,000 hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20,120Hz) B C A L D 7.0 4.3 4.3 5.1 4 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" MARKING EX) 16V47F 4h 47 C LE Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 102 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 7000 to 8000-hours-life, 105 MLESeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Size code Rated ripple current (mArms/105, 120Hz) Part No. 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 D73 E73 F73 F90 HA0 JA0 E73 HA0 D73 E73 F73 F90 JA0 F73 F90 HA0 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 EMLE6R3ADA220MD73G EMLE6R3ADA470ME73G EMLE6R3ADA101MF73G EMLE6R3ADA221MF90G EMLE6R3ADA331MHA0G EMLE6R3ADA102MJA0G EMLE100ADA330ME73G EMLE100ADA221MHA0G EMLE160ADA100MD73G EMLE160ADA220ME73G EMLE160ADA470MF73G EMLE160ADA101MF90G EMLE160ADA471MJA0G EMLE250ADA330MF73G EMLE250ADA470MF90G EMLE250ADA101MHA0G WV (Vdc) 35 50 Cap (F) Size code 1.0 2.2 3.3 4.7 4.7 10 10 22 22 33 220 33 47 100 D73 D73 D73 D73 E73 E73 F73 F73 F90 F90 JA0 HA0 HA0 JA0 Rated ripple current (mArms/105, 120Hz) 6.2 11 14 15 19 25 30 42 49 57 216 77 92 151 Part No. EMLE350ADA1R0MD73G EMLE350ADA2R2MD73G EMLE350ADA3R3MD73G EMLE350ADA4R7MD73G EMLE350ADA4R7ME73G EMLE350ADA100ME73G EMLE350ADA100MF73G EMLE350ADA220MF73G EMLE350ADA220MF90G EMLE350ADA330MF90G EMLE350ADA221MJA0G EMLE500ADA330MHA0G EMLE500ADA470MHA0G EMLE500ADA101MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 103 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 5000-hours-life, 105 MLK - Series 6.1mm height Endurance : 5,000 hours at 105 Rated voltage range : 6.3 to 35V Nominal capacitance range : 4.7 to 100F Suitable to fit for downsized equipment Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MVL P105 Longer life MLK SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105 6.3 to 35Vdc 20%(M) I=0.03CV or 4A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tan (Max.) 0.32 0.28 0.26 0.16 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V Z(-10)/Z(+20) 4 3 2 2 2 1 2 3 4 5 6 7 8 9 10 11 12 A0.2 A 5.3 6.6 B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 10 V LK STANDARD RATINGS 10 16 25 35 16 17 18 MARKING 9C 6.3 15 Please refer to "Product code guide (surface mount type)" EX) 35V10F WV (Vdc) 14 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100,100F:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C0.2 B0.2 D0.5 L 5.8 5.8 13 E MLK AAA A DA AAA M AAA G 0.3max. L0.3 D 5 6.3 (at 20,120Hz) PART NUMBERING SYSTEM Code : A W Size code E61 F61 (at 20, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 5,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20,120Hz) Cap (F) Size code 47 100 33 22 47 33 4.7 10 10 22 E61 F61 E61 E61 F61 F61 E61 E61 F61 F61 Rated ripple current tan (mArms/ 105,120Hz) 0.32 0.32 0.28 0.26 0.26 0.16 0.14 0.14 0.14 0.14 36 60 35 30 50 48 19 25 30 42 Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Part No. Frequency(Hz) 6.3 to 35Vdc EMLK6R3ADA470ME61G EMLK6R3ADA101MF61G EMLK100ADA330ME61G EMLK160ADA220ME61G EMLK160ADA470MF61G EMLK250ADA330MF61G EMLK350ADA4R7ME61G EMLK350ADA100ME61G EMLK350ADA100MF61G EMLK350ADA220MF61G 120 1.00 1k 1.05 10k 1.08 100k 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 104 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVL - Series 3000 to 5000-hours-life, 105 MVL Endurance : 3,000 to 5,000 hours at 105 Suitable for applications requiring long life such as continuously operating equipment, industrial applications, etc Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Longer life MVJ P107 SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life Characteristics -40 to +105 6.3 to 50Vdc (at 20,120Hz) 20%(M) I=0.03CV or 4A, whichever is greater Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Max. tan 0.28 0.24 0.20 0.16 0.13 0.12 (at 20,120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 4 3 2 2 2 2 Z(-40)/Z(+20) 10 7 5 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified time at 105. D60 to F803,000 hours Time HA0 & JA05,000 hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal PART NUMBERING SYSTEM Code : A 1 3 4 5 6 7 8 9 W A0.2 Note : L0.5 for HA0 and JA0 A L D 5.7 4.3 4 5.7 5.3 5 6.3 5.7 6.6 6.3 7.7 6.6 8 10.0 8.3 10 10.0 10.3 11 12 13 14 15 16 MARKING 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C0.2 B0.2 0.3max. L0.3 (Note) Size code D60 E60 F60 F80 HA0 JA0 10 E MV L AAA A DA AAA M AAA G Vent for JA0 D0.5 2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 5.1 5.9 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 EX) 16V47F 9hL 47 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 105 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 3000 to 5000-hours-life, 105 MVLSeries - STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Size code tan 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 330 D60 E60 F60 F80 HA0 JA0 E60 HA0 D60 E60 F60 F80 JA0 F60 F80 HA0 JA0 0.28 0.28 0.28 0.28 0.28 0.28 0.24 0.24 0.20 0.20 0.20 0.20 0.20 0.16 0.16 0.16 0.16 Rated ripple current (mArms/ 105, 120Hz) Part No. 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 238 EMVL6R3ADA220MD60G EMVL6R3ADA470ME60G EMVL6R3ADA101MF60G EMVL6R3ADA221MF80G EMVL6R3ADA331MHA0G EMVL6R3ADA102MJA0G EMVL100ADA330ME60G EMVL100ADA221MHA0G EMVL160ADA100MD60G EMVL160ADA220ME60G EMVL160ADA470MF60G EMVL160ADA101MF80G EMVL160ADA471MJA0G EMVL250ADA330MF60G EMVL250ADA470MF80G EMVL250ADA101MHA0G EMVL250ADA331MJA0G WV (Vdc) 35 50 Cap (F) 4.7 10 22 33 220 1.0 2.2 3.3 4.7 10 22 33 47 100 Size code tan D60 E60 F60 F80 JA0 D60 D60 D60 E60 F60 F80 HA0 HA0 JA0 0.13 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Rated ripple current (mArms/ 105, 120Hz) 15 25 42 57 216 6.2 11 14 19 30 49 77 92 151 Part No. EMVL350ADA4R7MD60G EMVL350ADA100ME60G EMVL350ADA220MF60G EMVL350ADA330MF80G EMVL350ADA221MJA0G EMVL500ADA1R0MD60G EMVL500ADA2R2MD60G EMVL500ADA3R3MD60G EMVL500ADA4R7ME60G EMVL500ADA100MF60G EMVL500ADA220MF80G EMVL500ADA330MHA0G EMVL500ADA470MHA0G EMVL500ADA101MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 106 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 2000-hours-life, 105 MVJ - MVL P105 Series longer life MVJ Endurance : 2,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant longer life MVE P82 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.30 0.24 0.20 0.16 0.14 0.12 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 4 3 2 2 2 2 Z(-40)/Z(+20) 12 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change 30% of the initial value 25% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change 30% of the initial value 25% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal PART NUMBERING SYSTEM Code : A 1 2 3 4 5 6 7 8 9 10 L 5.7 5.7 5.7 A0.2 A 4.3 5.3 6.6 14 15 16 MARKING 17 EX) 6.3V100F 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C0.2 B0.2 D0.5 0.3max. L0.3 D 4 5 6.3 13 E MV J AAA A DA AAA M AAA G W Size code D60 E60 F60 11 12 B 4.3 5.3 6.6 C 5.1 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 7hJ 100 6.3V Please refer to "Product code guide (surface mount type)" STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Size code tan 22 47 100 33 10 22 47 33 D60 E60 F60 E60 D60 E60 F60 F60 0.30 0.30 0.30 0.24 0.20 0.20 0.20 0.16 Rated ripple current (mArms/ 105,120Hz) Part No. 21 36 56 34 16 30 48 45 EMVJ6R3ADA220MD60G EMVJ6R3ADA470ME60G EMVJ6R3ADA101MF60G EMVJ100ADA330ME60G EMVJ160ADA100MD60G EMVJ160ADA220ME60G EMVJ160ADA470MF60G EMVJ250ADA330MF60G WV (Vdc) 35 50 Cap (F) 4.7 10 22 1.0 2.2 3.3 4.7 10 Size code tan D60 E60 F60 D60 D60 D60 E60 F60 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 Rated ripple current (mArms/ 105,120Hz) 15 25 40 5.6 10 14 19 29 Part No. EMVJ350ADA4R7MD60G EMVJ350ADA100ME60G EMVJ350ADA220MF60G EMVJ500ADA1R0MD60G EMVJ500ADA2R2MD60G EMVJ500ADA3R3MD60G EMVJ500ADA4R7ME60G EMVJ500ADA100MF60G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 2.2 to 10 22 to 100 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 107 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVH - High heat resistance, 125 Series MVH Lower ESR, Higher ripple current Endurance : 1,000 to 5,000 hours at 125 Suitable to fit for automotive equipment Solvent resistant type except 63 to 450Vdc (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant 125 MVE P82 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 10 to 450Vdc (at 20, 120Hz) 20% (M) Rated voltage (Vdc) 10 to 100Vdc 160 to 450Vdc F60 to JA0 I=0.01CV or 3A, whichever is greater. I=0.04CV+100 KE0 to MN0 I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V F60 to JA0 0.24 0.20 0.16 0.14 0.14 0.12 0.12 0.10 tan (Max.) KE0 to MN0 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.20 0.24 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V Z(-25)/Z(+20) 3 2 2 2 2 2 2 2 F60 to JA0 Z(-40)/Z(+20) 6 4 4 3 3 3 3 3 Z(-25)/Z(+20) 4 3 2 2 2 2 2 3 6 KE0 to MN0 Z(-40)/Z(+20) 8 6 4 3 3 3 3 6 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for the specified time at 125. F60 to H63 (10 to 100Vdc) : 1,000hours HA0 to JA0 (10 to 100Vdc) : 2,000hours Time KE0 to MN0 (10 to 100Vdc) : 5,000hours KE0 to MN0 (160 to 450Vdc) : 2,000hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours (500 hours for 400 to 450Vdc) at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage(Vdc) 10 to 50Vdc 63 to 450Vdc Capacitance change 30% of the initial value 30% of the initial value D.F. (tan) 300% of the initial specified value 300% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal Terminal Size Size Vent (Except HA0) 0.3max. L0.5 (Note) D0.5 P C0.2 B0.2 D0.5 W 0.3max. A0.2 L0.5 A0.2 W B0.2 Vent (Except F60 to HA0) Code : G(Vibration resistant structure) code : HA0 to MN0 Size code P C0.2 Code : A code : F60 to MN0 Note : L0.3 for F60 and F80 : Dummy terminals F60 F80 H63 HA0 JA0 KE0 KG5 LH0 LN0 MH0 MN0 D 6.3 6.3 8 8 10 12.5 12.5 16 16 18 18 L 5.7 7.7 6.3 10.0 10.0 13.5 16.0 16.5 21.5 16.5 21.5 A 6.6 6.6 8.3 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 B 6.6 6.6 8.3 8.3 10.3 13.0 13.0 17.0 17.0 19.0 19.0 C 7.2 7.2 9.0 9.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.9 1.9 2.3 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 MARKING 18 E MV H AAA A AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping*Tray code Terminal code (A, G) Voltage code (ex. 10V:100,50V:500, 100V: 101) Series code Category F60 to JA0 EX) 35V47F 74H 47 35V KE0 to MN0 EX) 16V1,000F 0V MVH 1000 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 108 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVHSeries - STANDARD RATINGS WV Cap (Vdc) (F) is not solvent resistant (63 to 450Vdc). Size code ESR Rated ripple ( max./ current 100kHz) (mArms/125) F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 LH0 MH0 MH0 MN0 F60 HA0 HA0 JA0 JA0 KE0 KE0 LH0 MH0 MH0 F60 F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 KE0 LH0 LH0 MH0 MN0 F60 F60 F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 LH0 KG5 LH0 MH0 F60 H63 F80 H63 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.10 0.10 0.10 0.058 1.6 0.40 0.40 0.30 0.30 0.14 0.14 0.10 0.10 0.10 1.6 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.14 0.10 0.10 0.10 0.058 1.6 1.6 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.10 0.11 0.10 0.10 2.8 1.6 2.0 1.6 WV Cap (Vdc) (F) Part No. Size code ESR Rated ripple ( max./ current 100kHz) (mArms/125) F80 H63 HA0 HA0 JA0 JA0 KE0 KE0 LH0 KG5 LH0 MH0 F80 H63 HA0 HA0 JA0 HA0 JA0 KE0 KG5 LH0 LN0 HA0 HA0 JA0 HA0 JA0 JA0 HA0 HA0 JA0 JA0 KE0 KG5 LH0 MN0 KE0 LH0 MH0 MN0 KE0 LH0 LN0 MH0 MN0 KG5 LN0 MH0 MN0 KE0 LH0 LN0 MH0 KG5 LH0 MN0 2.0 1.6 0.70 0.70 0.50 0.50 0.23 0.23 0.15 0.18 0.15 0.15 2.0 2.0 0.70 0.70 0.50 0.70 0.50 0.25 0.20 0.18 0.11 0.75 0.75 0.55 0.75 0.55 0.55 0.75 0.75 0.55 0.55 0.33 0.26 0.24 0.16 20 -40 100kHz 120Hz 10 16 25 35 50 100 100 220 220 220 330 330 470 1,000 2,200 2,200 3,300 4,700 47 100 220 220 330 470 680 680 1,000 2,200 33 47 47 100 100 100 220 220 330 330 470 470 680 680 1,000 10 22 33 33 47 47 47 100 100 220 330 330 470 470 680 10 10 22 22 High heat resistance, 125 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 1.5 1.5 1.5 0.87 24.0 6.0 6.0 4.5 4.5 2.1 2.1 1.5 1.5 1.5 24.0 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 2.1 1.5 1.5 1.5 0.87 24.0 24.0 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 1.5 1.5 1.5 1.5 42.0 30.0 30.0 30.0 110 110 110 110 220 220 296 296 750 1,000 1,200 1,200 1,550 69 220 220 296 296 750 750 1,000 1,200 1,200 69 110 110 110 110 220 220 296 296 750 750 1,000 1,000 1,200 1,550 69 69 110 110 110 110 220 220 296 296 750 1,000 900 1,000 1,200 51 83 83 83 Part No. 20 -40 100kHz 120Hz EMVH100ADA101MF80G EMVH100ADA101MH63G EMVH100ADA221MF80G EMVH100ADA221MH63G EMVH100DA221MHA0G EMVH100DA331MHA0G EMVH100DA331MJA0G EMVH100DA471MJA0G EMVH100RA102MKE0S EMVH100DA222MLH0S EMVH100DA222MMH0S EMVH100DA332MMH0S EMVH100DA472MMN0S EMVH160ADA470MF60G EMVH160DA101MHA0G EMVH160DA221MHA0G EMVH160DA221MJA0G EMVH160DA331MJA0G EMVH160RA471MKE0S EMVH160RA681MKE0S EMVH160DA681MLH0S EMVH160DA102MMH0S EMVH160DA222MMH0S EMVH250ADA330MF60G EMVH250ADA470MF80G EMVH250ADA470MH63G EMVH250ADA101MF80G EMVH250ADA101MH63G EMVH250DA101MHA0G EMVH250DA221MHA0G EMVH250DA221MJA0G EMVH250DA331MJA0G EMVH250RA331MKE0S EMVH250RA471MKE0S EMVH250DA471MLH0S EMVH250DA681MLH0S EMVH250DA681MMH0S EMVH250DA102MMN0S EMVH350ADA100MF60G EMVH350ADA220MF60G EMVH350ADA330MF80G EMVH350ADA330MH63G EMVH350ADA470MF80G EMVH350ADA470MH63G EMVH350DA470MHA0G EMVH350DA101MHA0G EMVH350DA101MJA0G EMVH350DA221MJA0G EMVH350RA331MKE0S EMVH350DA331MLH0S EMVH350RA471MKG5S EMVH350DA471MLH0S EMVH350DA681MMH0S EMVH500ADA100MF60G EMVH500ADA100MH63G EMVH500ADA220MF80G EMVH500ADA220MH63G 50 63 80 100 160 200 250 400 450 33 33 33 47 47 100 100 220 220 330 330 470 10 10 22 33 33 47 47 100 220 330 470 10 22 22 33 33 47 10 22 22 33 47 68 100 220 10 22 33 68 10 22 33 33 47 10 22 22 33 4.7 6.8 10 10 3.3 4.7 10 30.0 83 30.0 83 11.0 160 11.0 160 7.5 247 7.5 247 3.5 550 3.5 550 2.3 850 2.7 700 2.3 850 2.3 920 100 60 110 60 35.0 100 35.0 100 25.0 170 35.0 100 25.0 170 12.5 500 10.0 600 9.0 820 5.5 1,100 50.0 70 50.0 70 35.0 115 50.0 70 35.0 115 35.0 115 50.0 70 50.0 70 35.0 115 35.0 115 16.5 450 13.0 550 12.0 650 8.0 950 100 180 245 380 100 180 250 245 315 110 200 205 260 70 100 140 135 65 85 145 EMVH500ADA330MF80G EMVH500ADA330MH63G EMVH500DA330MHA0G EMVH500DA470MHA0G EMVH500DA470MJA0G EMVH500DA101MJA0G EMVH500RA101MKE0S EMVH500RA221MKE0S EMVH500DA221MLH0S EMVH500RA331MKG5S EMVH500DA331MLH0S EMVH500DA471MMH0S EMVH630ADA100MF80G EMVH630ADA100MH63G EMVH630DA220MHA0G EMVH630DA330MHA0G EMVH630DA330MJA0G EMVH630DA470MHA0G EMVH630DA470MJA0G EMVH630RA101MKE0S EMVH630RA221MKG5S EMVH630DA331MLH0S EMVH630DA471MLN0S EMVH800DA100MHA0G EMVH800DA220MHA0G EMVH800DA220MJA0G EMVH800DA330MHA0G EMVH800DA330MJA0G EMVH800DA470MJA0G EMVH101DA100MHA0G EMVH101DA220MHA0G EMVH101DA220MJA0G EMVH101DA330MJA0G EMVH101RA470MKE0S EMVH101RA680MKG5S EMVH101DA101MLH0S EMVH101DA221MMN0S EMVH161RA100MKE0S EMVH161DA220MLH0S EMVH161DA330MMH0S EMVH161DA680MMN0S EMVH201RA100MKE0S EMVH201DA220MLH0S EMVH201DA330MLN0S EMVH201DA330MMH0S EMVH201DA470MMN0S EMVH251RA100MKG5S EMVH251DA220MLN0S EMVH251DA220MMH0S EMVH251DA330MMN0S EMVH401RA4R7MKE0S EMVH401DA6R8MLH0S EMVH401DA100MLN0S EMVH401DA100MMH0S EMVH451RA3R3MKG5S EMVH451DA4R7MLH0S EMVH451DA100MMN0S : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Rated voltage (Vdc) Size code F60 to JA0 10 to 100 KE0 to MN0 160 to 450 KE0 to MN0 Capacitance(F) Frequency(Hz) 10 22 to 470 47 to 100 220 to 470 680 to 1,000 2,200 to 3,300 4,700 3.3 to 33 47 to 68 120 0.66 0.93 0.40 0.50 0.60 0.75 0.85 1.00 1.00 1k 0.86 0.97 0.75 0.85 0.87 0.90 0.95 1.50 1.30 10k 0.93 1.00 0.90 0.94 0.95 0.95 0.98 1.75 1.40 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 109 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125 MHL - Series Downsized and Longer life from current MVH series Endurance : 2,000 to 4,000 hours at 125 Rated voltage range : 10 to 35V. Nominal capacitance range : 47 to 680F For automobile modules and other high temperature applications Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant MHL Downsized Longer life MVH P108 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 10 to 35Vdc (at 20, 120Hz) 20%(M) I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V tan(Max.) 0.24 0.20 0.16 0.14 (at 20, 120Hz) Rated voltage(Vdc) 10V 16V 25V 35V Z(-25)/Z(+20) 3 2 2 2 Z(-40)/Z(+20) 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for specified time at 125. F61 & F80 2,000 hours Time HA0 & JA04,000 hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal Terminal Size Code : A code : F61 to JA0 Size Code : G(Vibration resistant structure) code : HA0 and JA0 Size code Vent for JA0 Vent for JA0 0.3max. W 0.3max. L0.3 (Note) Note : L0.5 for HA0 and JA0 2 3 4 5 6 7 8 9 10 11 12 B 6.6 6.6 8.3 10.3 C 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 1.9 3.1 4.5 : Dummy terminals PART NUMBERING SYSTEM 1 D L A 6.3 5.8 6.6 6.3 7.7 6.6 8 10.0 8.3 10 10.0 10.3 A0.2 L0.5 A0.2 P C0.2 B0.2 D0.5 P C0.2 B0.2 D0.5 W F61 F80 HA0 JA0 13 14 15 16 17 MARKING 18 EX) 35V47F E MH L A A A A D A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code (A, G) Voltage code (ex. 35V:350) Series code Category 2Q 47 V HL Rated voltage symbol Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 110 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125 MHLSeries - STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (F) Size code 100 220 330 470 680 47 100 220 330 470 680 47 100 220 330 47 100 220 330 F61 F80 HA0 HA0 JA0 F61 F61 F80 HA0 JA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 Impedance ( max./100kHz) 20 -40 1.2 0.60 0.30 0.30 0.20 1.2 1.2 0.60 0.30 0.20 0.20 1.2 0.60 0.30 0.20 1.2 0.60 0.30 0.20 22 12 5.5 5.5 3.6 22 22 12 5.5 3.6 3.6 22 12 5.5 3.6 22 12 5.5 3.6 Rated ripple current (mArms/125, 100kHz) 110 220 296 296 440 110 110 220 296 440 440 110 220 296 440 110 220 296 440 Part No. EMHL100ADA101MF61G EMHL100ADA221MF80G EMHL100 DA331MHA0G EMHL100 DA471MHA0G EMHL100 DA681MJA0G EMHL160ADA470MF61G EMHL160ADA101MF61G EMHL160ADA221MF80G EMHL160 DA331MHA0G EMHL160 DA471MJA0G EMHL160 DA681MJA0G EMHL250ADA470MF61G EMHL250ADA101MF80G EMHL250 DA221MHA0G EMHL250 DA331MJA0G EMHL350ADA470MF61G EMHL350ADA101MF80G EMHL350 DA221MHA0G EMHL350 DA331MJA0G : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 47 to 680 120 0.93 1k 0.97 10k 1.00 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 111 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHB - Series High heat resistance, 125 MHJ P114 ESR : Less than MVH Endurance : 1,500 to 3,000 hours at 125 Rated voltage range : 10 to 100V Nominal capacitance range : 47 to 3,300F Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant Lower ESR MHB Lower ESR MVH P108 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 10 to 100Vdc (at 20, 120Hz) 20%(M) HA0 & JA0 I=0.01CV KE0 to MN0 I=0.03CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V HA0 & JA0 0.24 0.20 0.16 0.14 tan (Max.) KE0 to MN0 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 3 2 2 2 HA0 & JA0 Z(-40)/Z(+20) 4 3 3 3 Z(-25)/Z(+20) 2 2 2 2 2 2 KE0 to MN0 Z(-40)/Z(+20) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 125. Capacitance change 30% of the initial value HA0 & JA0 D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125. KE0 & KG5 1,500hours Time LH0 & MH0 2,000hours KE0 to MN0 KN0 & LN0 & MN03,000hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal Terminal Size Size Vent (Except HA0) 0.3max. L0.5 D0.5 P C0.2 B0.2 D0.5 W 0.3max. A0.2 L0.5 A0.2 HA0 JA0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 W B0.2 Vent (Except HA0) Code : G(Vibration resistant structure) code : HA0 to MN0 Size code P C0.2 Code : A code : HA0 to MN0 D 8 10 12.5 12.5 12.5 16 16 18 18 L 10.0 10.0 13.5 16.0 21.5 16.5 21.5 16.5 21.5 A 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 B 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 C 9.0 11.0 13.7 13.7 13.7 18.0 18.0 20.0 20.0 W 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 3.1 4.5 4.2 4.2 4.2 6.5 6.5 6.5 6.5 : Dummy terminals PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 MARKING 18 KE0 to MN0 EX) 35V1,000F HA0, JA0 EX) 16V220F E MHB AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping*Tray code Terminal code (A, G) Voltage code (ex. 35V:350,100V:101) Series code Category 2A MHB 5J 1000 35V 220 CHB Rated voltage symbol (HA0, JA0) Rated voltage (Vdc) Symbol Please refer to "Product code guide (surface mount type)" 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 112 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 105 MHBSeries - STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 80 100 Cap (F) Size code 330 470 100 220 100 220 330 820 1,100 (1,500) 1,600 2,200 2,700 3,300 47 100 100 220 560 680 (910) 1,000 1,300 1,600 2,200 270 360 (470) 510 680 820 1,100 200 270 (330) 360 470 560 750 130 160 (220) 240 330 390 510 75 100 (130) 130 180 220 300 HA0 JA0 HA0 HA0 HA0 HA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 HA0 HA0 JA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 ESR(End of life) ( max.) ESR(Initial) ( max./100k to 400kHz) 100kHz 20 -40 20 0.3 0.2 0.3 0.3 0.3 0.3 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.3 0.3 0.2 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.11 0.10 (0.076) 0.087 0.087 0.050 0.050 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.28 0.21 (0.17) 0.18 0.15 0.11 0.091 3.0 2.0 3.0 3.0 3.0 3.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 3.0 3.0 2.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 0.55 0.50 (0.38) 0.44 0.44 0.25 0.25 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 2.24 1.68 (1.32) 1.44 1.20 0.88 0.73 - - - - - - - 0.30 0.28 (0.18) 0.24 0.23 0.10 0.090 - - - - 0.30 0.28 (0.18) 0.24 0.23 0.10 0.090 0.55 0.50 (0.38) 0.44 0.44 0.25 0.25 0.88 0.68 (0.53) 0.60 0.48 0.19 0.19 0.88 0.68 (0.53) 0.60 0.48 0.19 0.19 1.1 0.84 (0.66) 0.72 0.60 0.25 0.22 400kHz -40 - - - - - - - 3.7 3.4 (2.2) 2.9 2.8 1.3 0.60 - - - - 3.7 3.4 (2.2) 2.9 2.8 1.3 0.60 6.6 6.0 (4.6) 5.2 5.2 3.0 3.0 14 11 (8.5) 9.6 7.7 3.0 3.0 14 11 (8.5) 9.6 7.7 3.0 3.0 22 17 (13) 14 12 3.9 3.9 Rated ripple current (mArms/125, 100k to 400kHz) Part No. 240 330 240 240 240 240 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 240 240 330 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 980 1,090 (1,200) 1,320 1,420 2,040 2,240 540 650 (830) 780 940 1,790 1,910 540 650 (830) 780 940 1,790 1,910 480 580 (740) 720 840 1,580 1,690 EMHB100 DA331MHA0G EMHB100 DA471MJA0G EMHB160 DA101MHA0G EMHB160 DA221MHA0G EMHB250 DA101MHA0G EMHB250 DA221MHA0G EMHB250 DA331MJA0G EMHB250 RA821MKE0S EMHB250 RA112MKG5S (EMHB250 TR152MKN0S) EMHB250 DA162MLH0S EMHB250 DA222MMH0S EMHB250 DA272MLN0S EMHB250 DA332MMN0S EMHB350 DA470MHA0G EMHB350 DA101MHA0G EMHB350 DA101MJA0G EMHB350 DA221MJA0G EMHB350 RA561MKE0S EMHB350 RA681MKG5S (EMHB350 TR911MKN0S) EMHB350 DA102MLH0S EMHB350 DA132MMH0S EMHB350 DA162MLN0S EMHB350 DA222MMN0S EMHB500 RA271MKE0S EMHB500 RA361MKG5S (EMHB500 TR471MKN0S) EMHB500 DA511MLH0S EMHB500 DA681MMH0S EMHB500 DA821MLN0S EMHB500 DA112MMN0S EMHB630 RA201MKE0S EMHB630 RA271MKG5S (EMHB630 TR331MKN0S) EMHB630 DA361MLH0S EMHB630 DA471MMH0S EMHB630 DA561MLN0S EMHB630 DA751MMN0S EMHB800 RA131MKE0S EMHB800 RA161MKG5S (EMHB800 TR221MKN0S) EMHB800 DA241MLH0S EMHB800 DA331MMH0S EMHB800 DA391MLN0S EMHB800 DA511MMN0S EMHB101 RA750MKE0S EMHB101 RA101MKG5S (EMHB101 TR131MKN0S) EMHB101 DA131MLH0S EMHB101 DA181MMH0S EMHB101 DA221MLN0S EMHB101 DA301MMN0S -40 6.0 4.5 6.0 6.0 6.0 6.0 4.5 - - - - - - - 6.0 6.0 4.5 4.5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - : Enter the appropriate terminal code. ( ) :Second standard RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Size code HA0 to JA0 KE0 to MN0 Frequency(Hz) Capacitance(F) 47 75 220 680 2,200 to to to to to 470 200 560 1,600 3,300 120 0.93 0.40 0.50 0.60 0.75 1k 0.97 0.75 0.85 0.87 0.90 10k 1.00 0.90 0.94 0.95 0.95 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 113 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHJ - Series High heat resistance, 125 MHK P116 Lower ESR Endurance : 2,000 to 3,000 hours at 125 Rated voltage range : 10 to 35V Nominal capacitance range : 47 to 470F Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Vibration resistant structure RoHS Compliant MHJ Lower ESR MHB P112 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 10 to 35Vdc (at 20, 120Hz) 20%(M) I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V tan(Max.) 0.30 0.23 0.18 0.16 (at 20, 120Hz) Rated voltage(Vdc) 10V 16V 25V 35V Z(-25)/Z(+20) 3 2 2 2 Z(-40)/Z(+20) 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 3,000 hours (2,000 hours for F80 size) at 125. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value F80 HA0 JA0 ESR after 2,000 hours 20 3.5 0.60 0.40 ( max./100kHz) -40 40 4.5 3.5 The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Terminal Terminal Size Code : A code : F80 to JA0 Size Code : G(Vibration resistant structure) Size code code : HA0 to JA0 Vent for JA0 Vent for JA0 0.3max. Note : L0.3 for F80 3 4 5 6 7 8 9 P 1.9 3.1 4.5 : Dummy terminals PART NUMBERING SYSTEM 2 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 A0.2 L0.5 A0.2 C B A L D 6.3 7.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 P C0.2 B0.2 D0.5 P C0.2 B0.2 D0.5 W 0.3max. L0.5 (Note) 1 F80 HA0 JA0 W 10 11 12 13 14 15 16 17 MARKING EX) 16V100F 18 E MH J A A A A D A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Taping code Terminal code (A, G) Voltage code (ex. 16V:160, 35V:350) Series code Category 5j 100 CHJ Rated voltage symbol Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 114 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125 MHJSeries - STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (F) Size code 220 330 330 470 100 100 220 330 470 100 220 330 47 47 100 220 HA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 JA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 ESR ( max./100kHz) 20 40 0.15 0.15 0.12 0.12 0.45 0.15 0.15 0.12 0.12 0.15 0.12 0.12 0.45 0.15 0.15 0.12 3.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 2.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 Rated ripple current (mArms/125, 100kHz) 350 350 550 550 220 350 350 550 550 350 550 550 220 350 350 550 Part No. EMHJ100DA221MHA0G EMHJ100DA331MHA0G EMHJ100DA331MJA0G EMHJ100DA471MJA0G EMHJ160ADA101MF80G EMHJ160DA101MHA0G EMHJ160DA221MHA0G EMHJ160DA331MJA0G EMHJ160DA471MJA0G EMHJ250DA101MHA0G EMHJ250DA221MJA0G EMHJ250DA331MJA0G EMHJ350ADA470MF80G EMHJ350DA470MHA0G EMHJ350DA101MHA0G EMHJ350DA221MJA0G : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 47 to 100 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 115 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHK - High heat resistance, 125 New! Series ESR : Less than MHJ Endurance : 2,000 hours at 125 Specified ESR after endurance For automobile modules and other high temperature applications Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant MHK Lower ESR MHJ P114 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 35Vdc (at 20, 120Hz) 20%(M) I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minute) Rated voltage(Vdc) 35V tan (Max.) 0.14 (at 20, 120Hz) Rated voltage(Vdc) 35V Z(-25)/Z(+20) 2 Z(-40)/Z(+20) 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 125. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value ESR max./-40, 400kHz 6.0 The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life DIMENSIONS [mm] Terminal Size Code : A code : F80 P C0.2 B0.2 D0.5 W 0.3max. L0.3 Size code F80 D 6.3 L 7.7 A0.2 A 6.6 B 6.6 C 7.2 W 0.5 to 0.8 P 1.9 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 E MH K 3 5 0 A D A 11 12 13 14 15 16 17 18 M F80 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Taping code Terminal code Voltage code (ex.35V:350) Series code Category MARKING EX) 35V47F 3A 47 V HK Rated voltage symbol Rated voltage (Vdc) Symbol 35 V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 116 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125 MHKSeries New! - STANDARD RATINGS WV (Vdc) Cap (F) Size code 35 47 100 F80 F80 ESR max./100k to 400kHz) 20 -40 0.30 0.30 3.0 3.0 Rated ripple current (mArms/125, 100k to 400kHz) 240 240 Part No. EMHK350ADA470MF80G EMHK350ADA101MF80G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 47 to 100 120 0.40 1k 0.75 10k 0.90 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 117 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low ESR, 105 MKB - Series Low ESR Endurance : 3,000 hours at 105 Rated voltage 400V, Capacitance 2.2 to 4.7F RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 400Vdc (at 20, 120Hz) 20%(M) I=0.04CV+100(max.) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 1 minute) Rated voltage(Vdc) 400V tan (Max.) 0.25 (at 20, 120Hz) Rated voltage(Vdc) 400V Z(-25)/Z(+20) 6 Z(-40)/Z(+20) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 3,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life DIMENSIONS [mm] Terminal PART NUMBERING SYSTEM Code : A 1 Vent for JA0 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 2.2F:2R2) Taping code Terminal code Voltage code Series code Category P 0.2 0.2 D0.5 D 8 10 3 W 0.3max. L0.5 Size code HA0 JA0 2 E MK B 4 0 1 A D A A A A M A A A G A0.2 L A B C 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.7 to 1.1 0.7 to 1.1 P 3.1 4.5 Please refer to "Product code guide (surface mount type)" MARKING EX) 400V3.9F 6A 3.9 2GKB Rated voltage symbol Rated voltage (Vdc) Symbol 400 2G STANDARD RATINGS WV (Vdc) Cap (F) Size code 400 2.2 3.3 3.9 4.7 HA0 JA0 JA0 JA0 ESR ( max./120Hz) 20 -40 20 10 10 10 1,000 500 500 500 Rated ripple current (mArms/105,120Hz) 26 37 38 39 Part No. EMKB401ADA2R2MHA0G EMKB401ADA3R3MJA0G EMKB401ADA3R9MJA0G EMKB401ADA4R7MJA0G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 400Vdc 120 1.00 1k 1.30 10k 1.40 100k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 118 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Bi-polar, 85 MV-BP - Series Bi-polar chip type for the circuit, of which polarity is frequently reversed Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +85 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.05CV or 10A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.32 0.26 0.24 0.22 0.20 0.20 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 4 3 2 2 2 2 Z(-40)/Z(+20) 10 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 85, however the polarization shall be reversed every 250 hours. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal PART NUMBERING SYSTEM Code : A 1 2 3 4 5 6 7 8 9 10 P C0.2 B0.2 D0.5 D 4 5 6.3 L 5.2 5.2 5.2 A0.2 A 4.3 5.3 6.6 B 4.3 5.3 6.6 14 MARKING 15 16 17 EX) 35V4.7F 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,47F:470) Taping code Terminal code Voltage code (ex. 10V:100,25V:250,50V:500) Series code Category L0.3 Size code D55 E55 F55 13 B MV - AAA A DA AAA M AAA G W 0.3max. 11 12 C 5.1 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 94 4.7 35V Please refer to "Product code guide (surface mount type)" STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) Size code tan Rated ripple current (mArms/85, 120Hz) Part No. 10 22 47 33 4.7 10 22 3.3 2.2 4.7 10 1.0 2.2 3.3 4.7 D55 E55 F55 F55 D55 E55 F55 D55 D55 E55 F55 D55 E55 E55 F55 0.32 0.32 0.32 0.26 0.24 0.24 0.24 0.22 0.20 0.20 0.20 0.20 0.20 0.20 0.20 13 23 36 33 11 18 28 9.0 8.0 13 21 5.5 9.0 11 14 BMV-6R3ADA100MD55G BMV-6R3ADA220ME55G BMV-6R3ADA470MF55G BMV-100ADA330MF55G BMV-160ADA4R7MD55G BMV-160ADA100ME55G BMV-160ADA220MF55G BMV-250ADA3R3MD55G BMV-350ADA2R2MD55G BMV-350ADA4R7ME55G BMV-350ADA100MF55G BMV-500ADA1R0MD55G BMV-500ADA2R2ME55G BMV-500ADA3R3ME55G BMV-500ADA4R7MF55G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 119 CAT. No. E1001O Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Bi-polar, 105 MVK-BP - Series Bi-polar chip type for the circuit, of which polarity is frequently reversed Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.05CV or 10A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.35 0.26 0.24 0.20 0.18 0.18 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 4 3 2 2 2 2 Z(-40)/Z(+20) 10 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 105, however the polarization shall be reversed every 250 hours. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : A PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 W L0.3 Size code D 4 D60 5 E60 6.3 F60 L 5.7 5.7 5.7 A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 5.1 5.9 7.2 10 11 12 13 14 15 16 MARKING 17 EX) 35V4.7F 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C0.2 0.3max. 9 B MV K AAA A DA AAA M AAA G B0.2 A0.2 D0.5 Terminal W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 94K 4.7 35V Please refer to "Product code guide (surface mount type)" STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) Size code tan Rated ripple current (mArms/105, 120Hz) Part No. 10 22 47 33 4.7 10 22 3.3 2.2 4.7 10 1.0 2.2 3.3 4.7 D60 E60 F60 F60 D60 E60 F60 D60 D60 E60 F60 D60 E60 E60 F60 0.35 0.35 0.35 0.26 0.24 0.24 0.24 0.20 0.18 0.18 0.18 0.18 0.18 0.18 0.18 14 25 39 35 12 20 32 10 8.8 15 23 5.5 10 13 16 BMVK6R3ADA100MD60G BMVK6R3ADA220ME60G BMVK6R3ADA470MF60G BMVK100ADA330MF60G BMVK160ADA4R7MD60G BMVK160ADA100ME60G BMVK160ADA220MF60G BMVK250ADA3R3MD60G BMVK350ADA2R2MD60G BMVK350ADA4R7ME60G BMVK350ADA100MF60G BMVK500ADA1R0MD60G BMVK500ADA2R2ME60G BMVK500ADA3R3ME60G BMVK500ADA4R7MF60G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 120 CAT. No. E1001O Return Group Chart Miniature Aluminum Electrolytic Capacitors 121 Return Group Chart PART NUMBERING SYSTEM Product code guide (Radial lead type) (Example : KMQ series, 450V-100F, 18x40L, Long lead with bulk) Please refer to the following table Contents Code Series Code Type Code Tol.(%) Code Polar E B KMQ KMQ Radial lead E M FL FL- 20 -10 to +20 Bi-polar 1 2 3 4 5 6 7 E KMQ 4 5 1 Category Series code Voltage code Sleeve materia V Terminal plating Code material Sn-Bi PET S Sleeveless Sn-Bi G (Coating case) Sn H 8 9 10 11 12 13 14 15 16 17 18 E L L 1 0 1 M M 40 S Terminal code Lead forming/ Taping code Capacitance code Capacitance tolerance Size code D(mm) Code Supplement code Contents Code Cap.(F) Code 4 4R0 Long Lead LL 1.0 1R0 4 D 5 05 6.3 6R3 Cut(3.5mm) C3 4.7 4R7 5 E 7 07 10 100 Cut(5.0mm) C5 10 100 6.3 F 9 09 25 250 Forming Cut FC 47 470 8 H 11 11 100 101 Snap-inD=5 to 8 FM 100 101 10 J 11.5 B5 250 251 Voltage(V) Code Type Lead forming (Bulk) Snap-inD=10 to 18 MC 470 471 12.5 K 12.5 C5 RC 1,000 102 14.5 U 13 13 Horizontal BC 16 L 15 15 18 M 16 16 20 N 20 20 22 P 25 25 Gradual forming Taping L(mm) Code Snap-inD=20 to 22 Straight TD Straight(Skip a hole) TE Forming(F=2.5mm) TA 30 30 Forming(F=5.0mm) TC 31.5 N3 Refer to product guide for lead forming and taping specifications. D Sn 35 35 35.5 P1 40 40 45 45 50 50 55 55 60 60 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 122 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SRM Series Downsized, 5mm height, 85 SRM Downsized from current standard SRE series 5mm height Endurance : 1,000 hours at 85 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsized SRE P124 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 4 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.40 0.38 0.30 0.23 0.17 0.15 0.13 (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 7 4 3 2 2 2 2 Z(-40)/Z(+20) 15 8 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life D 8 5 6.3 4 d 0.45 0.45 0.45 0.45 F 1.5 2.0 2.5 2.5 D' D+0.5max. L' L+1.0max. D' d Terminal Code : E Sleeve (PET : Black)* F0.5 DIMENSIONS [mm] L' 15min. 4min. *8 : Coating case (4 to 8) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S RM A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0, 100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 Cap (F) 100 220 22 47 330 33 100 220 10 22 33 47 4.7 10 Rated ripple Case size current tan (mArms/ DxL(mm) 85, 120Hz) 5x 5 6.3 x 5 4x 5 4x5 8x5 4x 5 6.3 x 5 8x5 4x5 4x5 5x5 5x 5 4x 5 4x 5 0.40 0.40 0.38 0.38 0.38 0.30 0.30 0.30 0.23 0.23 0.23 0.23 0.17 0.17 55 88 22 40 141 36 78 148 18 33 47 55 13 25 Part No. ESRM4R0E101ME05D ESRM4R0E221MF05D ESRM6R3E220MD05D ESRM6R3E470MD05D ESRM6R3E331MH05G ESRM100E330MD05D ESRM100E101MF05D ESRM100E221MH05G ESRM160E100MD05D ESRM160E220MD05D ESRM160E330ME05D ESRM160E470ME05D ESRM250E4R7MD05D ESRM250E100MD05D WV (Vdc) 25 35 50 Cap (F) 22 47 100 3.3 33 47 1.0 2.2 3.3 4.7 10 22 33 Rated ripple Case size current tan (mArms/ DxL(mm) 85, 120Hz) 5x5 6.3 x 5 8x5 4x5 6.3 x 5 8x5 4x5 4x5 4x5 4x5 5x5 6.3 x 5 8x5 0.17 0.17 0.17 0.15 0.15 0.15 0.13 0.13 0.13 0.13 0.13 0.13 0.13 41 63 116 12 56 85 7.2 10 14 19 31 49 76 Part No. ESRM250E220ME05D ESRM250E470MF05D ESRM250E101MH05G ESRM350E3R3MD05D ESRM350E330MF05D ESRM350E470MH05G ESRM500E1R0MD05D ESRM500E2R2MD05D ESRM500E3R3MD05D ESRM500E4R7MD05D ESRM500E100ME05D ESRM500E220MF05D ESRM500E330MH05G : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 123 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 5mm height, 85 SRE SRM P123 Series Downsized 5mm height Endurance : 1,000 hours at 85 Non solvent resistant type RoHS Compliant SRE SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 4 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.35 0.24 0.20 0.16 0.14 0.12 0.10 (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 7 4 3 2 2 2 2 Z(-40)/Z(+20) 15 10 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life D 6.3 5 4 d 0.45 0.45 0.45 F 1.5 2.0 2.5 D' D+0.5max. L' L+1.0max. D' d Terminal Code : E Sleeve (PET : Black) F0.5 DIMENSIONS [mm] L' 15min. 4min. (4 to 6.3) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SRE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0, 100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS WV (Vdc) Cap (F) 4 33 10 22 47 100 33 4.7 10 22 47 3.3 4.7 33 6.3 10 16 25 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 4x 5 4x 5 4x 5 5x 5 6.3 x5 5 x5 4 x5 4 x5 5 x5 6.3 x5 4 x5 4 x5 6.3x 5 0.35 0.24 0.24 0.24 0.24 0.20 0.16 0.16 0.16 0.16 0.14 0.14 0.14 23 12 23 38 60 35 10 17 32 50 9.3 12 45 WV (Vdc) Part No. ESRE4R0E330MD05D ESRE6R3E100MD05D ESRE6R3E220MD05D ESRE6R3E470ME05D ESRE6R3E101MF05D ESRE100E330ME05D ESRE160E4R7MD05D ESRE160E100MD05D ESRE160E220ME05D ESRE160E470MF05D ESRE250E3R3MD05D ESRE250E4R7MD05D ESRE250E330MF05D 35 50 Cap (F) 2.2 3.3 4.7 10 22 1.0 2.2 3.3 4.7 10 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 4x5 4x5 4x5 5x5 6.3 x 5 4x5 4x5 4x5 5x5 6.3 x 5 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 8.3 11 15 25 40 6.2 10 14 19 29 Part No. ESRE350E2R2MD05D ESRE350E3R3MD05D ESRE350E4R7MD05D ESRE350E100ME05D ESRE350E220MF05D ESRE500E1R0MD05D ESRE500E2R2MD05D ESRE500E3R3MD05D ESRE500E4R7ME05D ESRE500E100MF05D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 124 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KRE 5mm height, 105 KRE Series 5mm height Endurance : 1,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant 105 SRE P124 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.27 0.23 0.19 0.15 0.13 0.11 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 3 3 2 2 2 2 Z(-40)/Z(+20) 9 7 5 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D 6.3 5 4 d 0.45 0.45 0.45 F 1.5 2.0 2.5 D' D+0.5max. L' L+1.0max. D' d Sleeve (PET : Brown) F0.5 Terminal L' 15min. 4min. (4 to 6.3) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KRE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) 10 22 47 100 33 4.7 10 22 47 3.3 4.7 33 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 4x 5 4x 5 5x 5 6.3 x5 5 x5 4 x5 4 x5 5 x5 6.3 x5 4 x5 4 x5 6.3x 5 0.27 0.27 0.27 0.27 0.23 0.19 0.19 0.19 0.19 0.15 0.15 0.15 12 21 36 56 34 9.4 16 30 48 8.8 12 45 WV (Vdc) Part No. EKRE6R3E100MD05D EKRE6R3E220MD05D EKRE6R3E470ME05D EKRE6R3E101MF05D EKRE100E330ME05D EKRE160E4R7MD05D EKRE160E100MD05D EKRE160E220ME05D EKRE160E470MF05D EKRE250E3R3MD05D EKRE250E4R7MD05D EKRE250E330MF05D 35 50 Cap (F) 2.2 3.3 4.7 10 22 1.0 2.2 3.3 4.7 10 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 4x5 4x5 4x5 5x5 6.3 x 5 4x5 4x5 4x5 5x5 6.3 x 5 0.13 0.13 0.13 0.13 0.13 0.11 0.11 0.11 0.11 0.11 7.7 11 15 25 40 5.6 10 14 19 29 Part No. EKRE350E2R2MD05D EKRE350E3R3MD05D EKRE350E4R7MD05D EKRE350E100ME05D EKRE350E220MF05D EKRE500E1R0MD05D EKRE500E2R2MD05D EKRE500E3R3MD05D EKRE500E4R7ME05D EKRE500E100MF05D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 125 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SRA 7mm height, 85 SRG P128 Series Downsized 7mm height Endurance : 1,000 hours at 85 Non solvent resistant type RoHS Compliant SRA SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 4 to 63Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V tan (Max.) 0.35 0.24 0.20 0.16 0.14 0.12 0.10 0.08 (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V Z(-25)/Z(+20) 4 4 3 2 2 2 2 2 Z(-40)/Z(+20) 10 10 8 6 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' F0.5 d Sleeve (PET : Black) F0.5 Terminal 8 6.3 5 4 D d 0.45 0.45 0.45 0.45 1.5 2.0 2.5 3.5 F D' D+0.5max. L' L+1.0max. or L' 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SRA AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 Cap (F) 33 47 100 220 470 22 47 330 33 100 220 10 22 47 100 33 47 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 4x 7 4x 7 5 x7 6.3 x7 8 x7 4x 7 5x 7 8 x7 5 x7 6.3 x7 8 x7 4x7 5 x7 6.3 x7 6.3 x7 6.3x7 6.3 x7 0.35 0.35 0.35 0.35 0.35 0.24 0.24 0.24 0.20 0.20 0.20 0.16 0.16 0.16 0.16 0.14 0.14 26 34 61 95 154 31 47 156 43 80 140 25 39 59 97 53 71 Please refer to "Product code guide (radial lead type)" WV (Vdc) Part No. ESRA4R0E330MD07D ESRA4R0E470MD07D ESRA4R0E101ME07D ESRA4R0E221MF07D ESRA4R0E471MH07D ESRA6R3E220MD07D ESRA6R3E470ME07D ESRA6R3E331MH07D ESRA100E330ME07D ESRA100E101MF07D ESRA100E221MH07D ESRA160E100MD07D ESRA160E220ME07D ESRA160E470MF07D ESRA160E101MF07D ESRA250E330MF07D ESRA250E470MF07D 35 50 63 Cap (F) 4.7 10 22 33 47 1.0 2.2 3.3 4.7 10 22 33 1.0 2.2 3.3 4.7 10 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 4x7 5x7 6.3 x 7 6.3 x 7 8x7 4x7 4x7 4x7 5x7 6.3 x 7 6.3 x 7 8x7 4x7 4x7 5x7 6.3 x 7 6.3 x 7 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 20 30 47 64 83 10 15 18 23 34 57 76 11 17 21 26 47 Part No. ESRA350E4R7MD07D ESRA350E100ME07D ESRA350E220MF07D ESRA350E330MF07D ESRA350E470MH07D ESRA500E1R0MD07D ESRA500E2R2MD07D ESRA500E3R3MD07D ESRA500E4R7ME07D ESRA500E100MF07D ESRA500E220MF07D ESRA500E330MH07D ESRA630E1R0MD07D ESRA630E2R2MD07D ESRA630E3R3ME07D ESRA630E4R7MF07D ESRA630E100MF07D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 126 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 7mm height, 105 KMA Series KMA 7mm height Endurance : 1,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant 105 SRA P126 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -55 to +105 4 to 63Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V tan (Max.) 0.35 0.22 0.19 0.16 0.14 0.12 0.10 0.08 (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 Z(-40)/Z(+20) 10 6 5 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 105. Rated voltage 4 to 16Vdc 25 to 63Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 4 to 16Vdc 25 to 63Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] 1 F0.5 d 2 3 4 5 6 7 8 15min. 4min. D 6.3 5 4 d 0.45 0.45 0.45 F 1.5 2.0 2.5 D' D+0.5max. L' L+1.0max. or 10 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category F0.5 L' 9 E KMA A A A E A A A A A M A A A D D' Terminal Code : E Sleeve (PET : Brown) PART NUMBERING SYSTEM Please refer to "Product code guide (radial lead type)" Gas escape end seal STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 Cap (F) 33 47 100 220 22 47 33 100 10 22 47 100 33 47 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 4x 7 4x 7 5x 7 6.3x 7 4x 7 5x 7 5x 7 6.3x 7 4x 7 5x 7 6.3x 7 6.3x 7 6.3x 7 6.3x 7 0.35 0.35 0.35 0.35 0.22 0.22 0.19 0.19 0.16 0.16 0.16 0.16 0.14 0.14 26 34 61 95 31 47 43 80 25 39 59 97 53 71 WV (Vdc) Part No. EKMA4R0E330MD07D EKMA4R0E470MD07D EKMA4R0E101ME07D EKMA4R0E221MF07D EKMA6R3E220MD07D EKMA6R3E470ME07D EKMA100E330ME07D EKMA100E101MF07D EKMA160E100MD07D EKMA160E220ME07D EKMA160E470MF07D EKMA160E101MF07D EKMA250E330MF07D EKMA250E470MF07D 35 50 63 : Enter the appropriate lead forming or taping code. Cap (F) 4.7 10 22 33 1.0 2.2 3.3 4.7 10 22 1.0 2.2 3.3 4.7 10 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 4x7 5x7 6.3 x 7 6.3 x 7 4x7 4x7 4x7 5x7 6.3 x 7 6.3 x 7 4x7 4x7 5x7 6.3 x 7 6.3 x 7 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 20 30 47 64 10 15 18 23 34 57 11 17 21 26 43 Part No. EKMA350E4R7MD07D EKMA350E100ME07D EKMA350E220MF07D EKMA350E330MF07D EKMA500E1R0MD07D EKMA500E2R2MD07D EKMA500E3R3MD07D EKMA500E4R7ME07D EKMA500E100MF07D EKMA500E220MF07D EKMA630E1R0MD07D EKMA630E2R2MD07D EKMA630E3R3ME07D EKMA630E4R7MF07D EKMA630E100MF07D Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 127 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 85 SRG SRG Series Low profile :4x7mm to18x25mm Endurance : 1,000 to 2,000 hours at 85 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsized Low profile Downsized SRA P126 SMG P138 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 4 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.38 0.28 0.24 0.20 0.16 0.14 0.12 When nominal capacitance exceeds 1,000F, add 0.03 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 6 5 4 3 2 2 2 Z(-40)/Z(+20) 12 12 10 8 5 4 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours (1,000 hours for8 and smaller) at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 d D' F0.5 Code : E Sleeve (PET : Black) F0.5 Terminal or L' 15min. 4min. Vent (10 and larger) (4 to 10) (12.5 to 18) Gas escape end seal 10 & 12.5 16 & 18 8 6.3 4 5 D 7L 0.45 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.8 9L 5.0 7.5 F 1.5 2.0 2.5 3.5 D ' D+0.5max. L' L+1.5max. (7L : L+1.0max.) d PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S RG AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 2,200F:222) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 128 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 85 SRGSeries STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 Cap (F) Rated ripple current Case code tan (mArms/ DxL(mm) 85, 120Hz) 470 8x 7 47 4x7 100 5x 7 220 6.3x 7 330 6.3 x9 330 8x7 1,000 10x9 4,700 16x15 6,800 18x15 10,000 18x20 33 4x7 100 5x 9 220 6.3x 9 220 8x 7 470 8x 9 1,000 10x 12.5 2,200 12.5x 15 3,300 16x 15 4,700 18x 15 6,800 18x 20 10,000 18x 25 22 4 x7 47 5 x7 100 6.3x7 220 8x9 330 8x9 470 10x 9 1,000 12.5x 13 2,200 16x 15 3,300 18x 15 4,700 18x 20 6,800 18x 25 33 5x 7 47 5x 9 47 6.3x 7 100 6.3x 9 330 10x 9 0.38 0.28 0.28 0.28 0.28 0.28 0.28 0.37 0.43 0.55 0.24 0.24 0.24 0.24 0.24 0.24 0.27 0.30 0.33 0.39 0.51 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.23 0.26 0.29 0.35 0.16 0.16 0.16 0.16 0.16 154 50 87 133 247 191 505 1,410 1,660 2,020 46 132 218 171 385 625 970 1,310 1,560 1,870 2,370 42 73 110 290 355 410 715 1,160 1,460 1,770 2,170 66 105 80 172 380 WV (Vdc) Part No. ESRG4R0E471MH07D ESRG6R3E470MD07D ESRG6R3E101ME07D ESRG6R3E221MF07D ESRG6R3E331MF09D ESRG6R3E331MH07D ESRG6R3E102MJ09S ESRG6R3E472ML15S ESRG6R3E682MM15S ESRG6R3E103MM20S ESRG100E330MD07D ESRG100E101ME09D ESRG100E221MF09D ESRG100E221MH07D ESRG100E471MH09D ESRG100E102MJC5S ESRG100E222MK15S ESRG100E332ML15S ESRG100E472MM15S ESRG100E682MM20S ESRG100E103MM25S ESRG160E220MD07D ESRG160E470ME07D ESRG160E101MF07D ESRG160E221MH09D ESRG160E331MH09D ESRG160E471MJ09S ESRG160E102MK13S ESRG160E222ML15S ESRG160E332MM15S ESRG160E472MM20S ESRG160E682MM25S ESRG250E330ME07D ESRG250E470ME09D ESRG250E470MF07D ESRG250E101MF09D ESRG250E331MJ09S 25 35 50 Cap (F) Rated ripple current Case code tan (mArms/ DxL(mm) 85, 120Hz) 470 10 x 12.5 1,000 12.5 x 15 2,200 18 x 15 3,300 18 x 20 4,700 18 x 25 10 4x7 22 5x7 33 5x9 33 6.3 x 7 47 8x7 100 8x9 220 10 x 9 330 10 x 12.5 470 12.5 x 13 1,000 16 x 15 2,200 18 x 20 1.0 4x7 1.0 5x9 2.2 4x7 2.2 5x9 3.3 4x7 3.3 5x9 4.7 4x7 4.7 5x9 10 5x7 10 5x9 22 5x9 22 6.3 x 7 33 6.3 x 9 33 8x7 47 6.3 x 9 100 10 x 9 220 10 x 12.5 330 12.5 x 13 470 16 x 15 1,000 18 x 20 0.16 0.16 0.19 0.22 0.25 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.17 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 525 830 1,360 1,720 2,070 32 57 94 73 101 220 335 475 585 1,010 1,560 10 13 15 26 19 32 24 38 42 64 86 64 113 93 135 240 415 525 745 1,160 Part No. ESRG250E471MJC5S ESRG250E102MK15S ESRG250E222MM15S ESRG250E332MM20S ESRG250E472MM25S ESRG350E100MD07D ESRG350E220ME07D ESRG350E330ME09D ESRG350E330MF07D ESRG350E470MH07D ESRG350E101MH09D ESRG350E221MJ09S ESRG350E331MJC5S ESRG350E471MK13S ESRG350E102ML15S ESRG350E222MM20S ESRG500E1R0MD07D ESRG500E1R0ME09D ESRG500E2R2MD07D ESRG500E2R2ME09D ESRG500E3R3MD07D ESRG500E3R3ME09D ESRG500E4R7MD07D ESRG500E4R7ME09D ESRG500E100ME07D ESRG500E100ME09D ESRG500E220ME09D ESRG500E220MF07D ESRG500E330MF09D ESRG500E330MH07D ESRG500E470MF09D ESRG500E101MJ09S ESRG500E221MJC5S ESRG500E331MK13S ESRG500E471ML15S ESRG500E102MM20S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 129 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105 KRG KRG Series Low profile :4x7mm to18x25mm Endurance : 1,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsized Low profile Downsized KMA P127 KMG P142 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.28 0.24 0.20 0.16 0.14 0.12 When nominal capacitance exceeds 1,000F, add 0.03 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25)/Z(+20) 5 4 3 2 2 2 Z(-40)/Z(+20) 10 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 105. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 d D' F0.5 Code : E Sleeve (PET : Brown) F0.5 Terminal or L' 15min. 4min. Vent (10 and larger) (4 to 10) (12.5 to 18) Gas escape end seal 8 4 6.3 10 & 12.5 16 & 18 D 5 7L 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.8 9L 5.0 7.5 F 1.5 2.0 2.5 3.5 D ' D+0.5max. L' L+1.5max. (7L : L+1.0max.) d PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KRG AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10F:100, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 130 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105 KRGSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 47 5x 7 330 6.3x 9 1,000 10x 9 4,700 16x 15 6,800 18x 15 10,000 18x 20 22 4x 7 100 5x 9 100 6.3 x7 220 6.3x9 470 8x9 1,000 10 x12.5 2,200 12.5 x15 3,300 16 x15 4,700 18 x15 6,800 18 x20 10,000 18 x25 33 5x7 47 6.3x7 100 6.3x7 220 8x 9 330 8x 9 470 10x 9 1,000 12.5x 13 2,200 16x 15 3,300 18x 15 4,700 18x 20 6,800 18x 25 10 4x 7 22 5x 7 33 6.3x 7 47 5x 9 47 6.3x 7 100 6.3x9 330 10x9 0.28 0.28 0.28 0.37 0.43 0.55 0.24 0.24 0.24 0.24 0.24 0.24 0.27 0.30 0.33 0.39 0.51 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.23 0.26 0.29 0.35 0.16 0.16 0.16 0.16 0.16 0.16 0.16 50 175 365 1,010 1,190 1,440 35 93 80 154 272 445 690 940 1,120 1,330 1,700 53 68 97 205 251 290 515 830 1,050 1,260 1,560 30 46 63 75 71 121 270 WV (Vdc) Part No. EKRG6R3E470ME07D EKRG6R3E331MF09D EKRG6R3E102MJ09S EKRG6R3E472ML15S EKRG6R3E682MM15S EKRG6R3E103MM20S EKRG100E220MD07D EKRG100E101ME09D EKRG100E101MF07D EKRG100E221MF09D EKRG100E471MH09D EKRG100E102MJC5S EKRG100E222MK15S EKRG100E332ML15S EKRG100E472MM15S EKRG100E682MM20S EKRG100E103MM25S EKRG160E330ME07D EKRG160E470MF07D EKRG160E101MF07D EKRG160E221MH09D EKRG160E331MH09D EKRG160E471MJ09S EKRG160E102MK13S EKRG160E222ML15S EKRG160E332MM15S EKRG160E472MM20S EKRG160E682MM25S EKRG250E100MD07D EKRG250E220ME07D EKRG250E330MF07D EKRG250E470ME09D EKRG250E470MF07D EKRG250E101MF09D EKRG250E331MJ09S 25 35 50 Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 470 10 x 12.5 1,000 12.5 x 15 2,200 18 x 15 3,300 18 x 20 4,700 18 x 25 10 5x7 22 6.3 x 7 33 5x9 33 6.3 x 7 100 8x9 220 10 x 9 330 10 x 12.5 470 12.5 x 13 1,000 16 x 15 2,200 18 x 20 1.0 4x7 1.0 5x9 2.2 4x7 2.2 5x9 3.3 4x7 3.3 5x9 4.7 4x7 4.7 5x9 10 5x9 10 6.3 x 7 22 5x9 22 6.3 x 7 33 6.3 x 9 47 6.3 x 9 100 10 x 9 220 10 x 12.5 330 12.5 x 13 470 16 x 15 1,000 18 x 20 0.16 0.16 0.19 0.22 0.25 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.17 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 370 590 970 1,220 1,470 36 57 67 64 155 235 340 415 720 1,110 10 12 15 18 18 22 25 27 46 44 61 57 80 95 170 290 370 535 830 Part No. EKRG250E471MJC5S EKRG250E102MK15S EKRG250E222MM15S EKRG250E332MM20S EKRG250E472MM25S EKRG350E100ME07D EKRG350E220MF07D EKRG350E330ME09D EKRG350E330MF07D EKRG350E101MH09D EKRG350E221MJ09S EKRG350E331MJC5S EKRG350E471MK13S EKRG350E102ML15S EKRG350E222MM20S EKRG500E1R0MD07D EKRG500E1R0ME09D EKRG500E2R2MD07D EKRG500E2R2ME09D EKRG500E3R3MD07D EKRG500E3R3ME09D EKRG500E4R7MD07D EKRG500E4R7ME09D EKRG500E100ME09D EKRG500E100MF07D EKRG500E220ME09D EKRG500E220MF07D EKRG500E330MF09D EKRG500E470MF09D EKRG500E101MJ09S EKRG500E221MJC5S EKRG500E331MK13S EKRG500E471ML15S EKRG500E102MM20S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 131 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SMQ Series Downsized, 85 SMQ Downsized from current standard SMG series Endurance : 2,000 hours at 85 Non solvent resistant type RoHS Compliant Downsized SMG P138 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85(6.3 to 400Vdc) -25 to +85(450Vdc) 6.3 to 450Vdc 20% (M) (at 20, 120Hz) 6.3 to 100Vdc I=0.03CV or 4A, whichever is greater. 160 to 450Vdc Time After 1minute CV CV1,000 I=0.1CV+40 max. CV1,000 I=0.04CV+100 max. 18 (at 20 after 1 minute) (at 20) I=0.03CV (at 20 after 3 minutes) 20 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V tan(Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 200V 250V 350V 400V 450V 5 4 3 2 2 2 2 2 3 3 4 4 6 8 Z(-25)/Z(+20) 5 4 3 2 2 2 2 2 3 3 4 4 6 10 12 10 8 5 4 3 3 3 8 10 8 8 8 Z(-40)/Z(+20) (at 120Hz) 10 8 5 4 3 3 3 4 4 6 6 10 12 The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change 20% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Sleeve (PET : Black) D' F0.5 5 to 18 F0.5 Code : E d Terminal 15min. L' Vent (except 5) 4min. (5 to 10) (12.5 to 18) 20 D' d Sleeve (PET : Black) F0.5 Gas escape end seal L' Vent 15min. 4min. D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 22 20 1.0 1.0 10.0 10.0 D+0.5max. L+2.0max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MQ A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 132 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85 SMQSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 47,000 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 47 68 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 8 x11.5 10 x16 10 x20 12.5x 20 12.5x 25 16 x25 16 x31.5 18 x35.5 20 x40 22 x50 5 x11 6.3x11 6.3x11 10 x12.5 10 x16 12.5x 20 12.5x 25 16 x25 16 x31.5 16 x35.5 18 x40 22 x50 6.3x11 6.3x11 8 x11.5 10 x12.5 10 x20 12.5x 25 16 x25 16 x25 16 x35.5 18 x40 22 x40 5 x11 6.3x11 8 x11.5 10 x12.5 10 x16 12.5x 25 16 x25 16 x25 16 x35.5 18 x40 22 x50 5 x11 6.3x11 6.3x11 8 x11.5 10 x12.5 10 x16 12.5x 20 16 x25 16 x31.5 16 x35.5 18 x40 22 x50 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 6.3x11 6.3x11 8 x11.5 10 x12.5 0.28 0.30 0.32 0.34 0.38 0.46 0.56 0.70 0.92 1.20 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.66 0.88 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.48 0.62 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.34 0.44 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 0.32 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 540 890 1,190 1,550 1,920 2,350 2,550 3,200 3,500 3,900 240 290 350 650 990 1,450 1,800 2,250 2,550 2,880 3,400 4,500 260 320 440 700 1,000 1,700 2,100 2,250 2,710 3,100 3,800 180 280 440 550 860 1,550 1,980 2,200 2,600 2,800 3,800 130 160 210 385 490 650 1,150 1,800 2,100 2,500 2,800 3,700 17 28 35 41 60 95 125 155 210 260 430 WV (Vdc) Part No. ESMQ6R3E102MHB5D ESMQ6R3E222MJ16S ESMQ6R3E332MJ20S ESMQ6R3E472MK20S ESMQ6R3E682MK25S ESMQ6R3E103ML25S ESMQ6R3E153MLN3S ESMQ6R3E223MMP1S ESMQ6R3E333MN40S ESMQ6R3E473MP50S ESMQ100E221ME11D ESMQ100E331MF11D ESMQ100E471MF11D ESMQ100E102MJC5S ESMQ100E222MJ16S ESMQ100E332MK20S ESMQ100E472MK25S ESMQ100E682ML25S ESMQ100E103MLN3S ESMQ100E153MLP1S ESMQ100E223MM40S ESMQ100E333MP50S ESMQ160E221MF11D ESMQ160E331MF11D ESMQ160E471MHB5D ESMQ160E102MJC5S ESMQ160E222MJ20S ESMQ160E332MK25S ESMQ160E472ML25S ESMQ160E682ML25S ESMQ160E103MLP1S ESMQ160E153MM40S ESMQ160E223MP40S ESMQ250E101ME11D ESMQ250E221MF11D ESMQ250E331MHB5D ESMQ250E471MJC5S ESMQ250E102MJ16S ESMQ250E222MK25S ESMQ250E332ML25S ESMQ250E472ML25S ESMQ250E682MLP1S ESMQ250E103MM40S ESMQ250E153MP50S ESMQ350E470ME11D ESMQ350E680MF11D ESMQ350E101MF11D ESMQ350E221MHB5D ESMQ350E331MJC5S ESMQ350E471MJ16S ESMQ350E102MK20S ESMQ350E222ML25S ESMQ350E332MLN3S ESMQ350E472MLP1S ESMQ350E682MM40S ESMQ350E103MP50S ESMQ500E1R0ME11D ESMQ500E2R2ME11D ESMQ500E3R3ME11D ESMQ500E4R7ME11D ESMQ500E100ME11D ESMQ500E220ME11D ESMQ500E330ME11D ESMQ500E470MF11D ESMQ500E680MF11D ESMQ500E101MHB5D ESMQ500E221MJC5S 50 63 100 160 200 250 350 Cap (F) 330 470 1,000 2,200 3,300 4,700 6,800 22 33 47 68 100 220 330 470 1,000 2,200 3,300 4,700 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 470 1,000 2,200 10 22 33 47 68 100 220 330 470 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 3.3 4.7 10 22 33 47 68 100 220 2.2 3.3 4.7 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 35.5 20 x 40 22 x 50 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 35.5 20 x 40 22 x 50 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 25 18 x 35.5 22 x 50 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 31.5 18 x 35.5 18 x 40 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 40 6.3 x 11 6.3 x 11 10 x 12.5 10 x 20 10 x 20 12.5 x 20 16 x 25 16 x 25 18 x 35.5 6.3 x 11 8 x 11.5 8 x 11.5 0.12 0.12 0.12 0.14 0.16 0.18 0.22 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.11 0.13 0.15 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 590 760 1,350 1,980 2,500 2,900 3,500 100 140 170 220 280 490 710 900 1,300 2,300 2,700 3,400 21 30 40 45 70 130 180 200 270 340 550 760 1,000 1,350 2,400 80 130 180 210 350 430 760 995 1,200 22 33 40 50 80 150 205 270 350 475 700 950 40 50 100 170 200 270 380 440 680 30 46 55 Part No. ESMQ500E331MJ16S ESMQ500E471MJ20S ESMQ500E102MK25S ESMQ500E222MLN3S ESMQ500E332MMP1S ESMQ500E472MN40S ESMQ500E682MP50S ESMQ630E220ME11D ESMQ630E330MF11D ESMQ630E470MF11D ESMQ630E680MHB5D ESMQ630E101MHB5D ESMQ630E221MJ16S ESMQ630E331MJ20S ESMQ630E471MK20S ESMQ630E102ML25S ESMQ630E222MMP1S ESMQ630E332MN40S ESMQ630E472MP50S ESMQ101E1R0ME11D ESMQ101E2R2ME11D ESMQ101E3R3ME11D ESMQ101E4R7ME11D ESMQ101E100ME11D ESMQ101E220MF11D ESMQ101E330MHB5D ESMQ101E470MHB5D ESMQ101E680MJC5S ESMQ101E101MJ16S ESMQ101E221MK20S ESMQ101E331MK25S ESMQ101E471ML25S ESMQ101E102MMP1S ESMQ101E222MP50S ESMQ161E100MHB5D ESMQ161E220MJC5S ESMQ161E330MJ16S ESMQ161E470MJ20S ESMQ161E680MK20S ESMQ161E101MK25S ESMQ161E221MLN3S ESMQ161E331MMP1S ESMQ161E471MM40S ESMQ201E1R0MF11D ESMQ201E2R2MF11D ESMQ201E3R3MF11D ESMQ201E4R7MF11D ESMQ201E100MHB5D ESMQ201E220MJ16S ESMQ201E330MJ20S ESMQ201E470MK20S ESMQ201E680MK25S ESMQ201E101ML25S ESMQ201E221MLP1S ESMQ201E331MM40S ESMQ251E3R3MF11D ESMQ251E4R7MF11D ESMQ251E100MJC5S ESMQ251E220MJ20S ESMQ251E330MJ20S ESMQ251E470MK20S ESMQ251E680ML25S ESMQ251E101ML25S ESMQ251E221MMP1S ESMQ351E2R2MF11D ESMQ351E3R3MHB5D ESMQ351E4R7MHB5D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 133 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85 SMQSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 10 22 33 47 68 100 1.0 2.2 3.3 4.7 10 22 33 47 68 100 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 10 x 12.5 12.5x 20 12.5x25 16 x25 16 x25 18 x31.5 6.3 x11 8 x11.5 8 x11.5 10 x12.5 10 x16 12.5 x25 16 x25 16 x25 16 x31.5 18 x35.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 90 185 240 325 400 530 22 38 48 60 90 205 275 280 340 440 Part No. ESMQ351E100MJC5S ESMQ351E220MK20S ESMQ351E330MK25S ESMQ351E470ML25S ESMQ351E680ML25S ESMQ351E101MMN3S ESMQ401E1R0MF11D ESMQ401E2R2MHB5D ESMQ401E3R3MHB5D ESMQ401E4R7MJC5S ESMQ401E100MJ16S ESMQ401E220MK25S ESMQ401E330ML25S ESMQ401E470ML25S ESMQ401E680MLN3S ESMQ401E101MMP1S WV (Vdc) Cap (F) 450 2.2 3.3 4.7 10 22 33 47 68 100 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 28 40 46 80 140 180 220 260 280 Part No. ESMQ451E2R2MHB5D ESMQ451E3R3MJC5S ESMQ451E4R7MJC5S ESMQ451E100MJ20S ESMQ451E220MK25S ESMQ451E330ML25S ESMQ451E470MLN3S ESMQ451E680MMP1S ESMQ451E101MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers (5 to18) Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 68 to 1,000 to 50 0.65 0.75 0.80 0.85 (20 to22) 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Rated Voltage (Vdc) Frequency (Hz) 6.3 to 50 63 to 100 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 100k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 134 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KMQ Series Downsized, 105 KMQ Downsized from current standard KMG series Solvent resistant type except 160 to 450Vdc (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsized KMG P142 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105(6.3 to 100Vdc) -40 to +105(160 to 400Vdc) -25 to +105(450Vdc) 6.3 to 450Vdc 20% (M) (at 20, 120Hz) 6.3 to 100Vdc I=0.03CV or 4A, whichever is greater. 160 to 450Vdc Time After 1minute CV CV1,000 I=0.1CV+40 max. CV1,000 I=0.04CV+100 max. 18 (at 20 after 1 minute) (at 20) I=0.03CV max. (at 20 after 3 minutes) 20 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tan(Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63 to 100V 160 to 200V 250V 350V 400V 450V 5 4 3 2 2 2 2 3 3 4 4 6 8 Z(-25)/Z(+20) 5 4 3 2 2 2 2 3 3 4 4 6 10 10 8 6 4 3 3 3 8 10 8 8 8 Z(-40)/Z(+20) (at 120Hz) 8 6 4 3 3 3 4 4 6 6 10 10 The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours for10 and more at 105). Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change 20% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Sleeve (PET : Brown) D' F0.5 5 to 18 F0.5 Code : E d Terminal 20 (5 to 10) (12.5 to 18) Gas escape end seal D' d Sleeve (PET : Brown) 4min. F0.5 15min. L' Vent (except 5) 15min. L' Vent 4min. D 5 d 0.5 F 2.0 D' L' 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 22 20 1.0 1.0 10.0 10.0 D+0.5max. L+2.0max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 135 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105 KMQSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 47,000 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 47 68 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 is not solvent resistant. Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 8 x11.5 10 x16 10 x20 12.5x 20 12.5x 25 16 x25 16 x31.5 18 x35.5 20 x40 22 x50 5 x11 6.3x11 6.3x11 10 x12.5 10 x16 12.5x 20 12.5x 25 16 x25 16 x31.5 16 x35.5 18 x40 22 x50 6.3x11 6.3x11 8 x11.5 10 x12.5 10 x20 12.5x 25 16 x25 16 x25 16 x35.5 18 x40 22 x40 5 x11 6.3x11 8 x11.5 10 x12.5 10 x16 12.5x 25 16 x25 16 x25 16 x35.5 18 x40 22 x50 5 x11 6.3x11 6.3x11 8 x11.5 10 x12.5 10 x16 12.5x 20 16 x25 16 x31.5 16 x35.5 18 x40 22 x50 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 6.3x11 6.3x11 8 x11.5 10 x12.5 0.28 0.30 0.32 0.34 0.38 0.46 0.56 0.70 0.92 1.20 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.66 0.88 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.48 0.62 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.34 0.44 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 0.32 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 390 635 840 1,090 1,350 1,650 1,820 2,280 2,500 2,780 155 210 250 460 705 1,000 1,260 1,570 1,820 2,050 2,420 3,210 190 225 315 500 710 1,170 1,500 1,600 1,930 2,210 2,710 125 200 310 380 610 1,090 1,400 1,570 1,850 2,000 2,750 93 110 150 270 350 460 810 1,260 1,500 1,780 2,000 2,650 13 20 25 30 46 68 90 115 150 190 300 WV (Vdc) Part No. EKMQ6R3E102MHB5D EKMQ6R3E222MJ16S EKMQ6R3E332MJ20S EKMQ6R3E472MK20S EKMQ6R3E682MK25S EKMQ6R3E103ML25S EKMQ6R3E153MLN3S EKMQ6R3E223MMP1S EKMQ6R3E333MN40S EKMQ6R3E473MP50S EKMQ100E221ME11D EKMQ100E331MF11D EKMQ100E471MF11D EKMQ100E102MJC5S EKMQ100E222MJ16S EKMQ100E332MK20S EKMQ100E472MK25S EKMQ100E682ML25S EKMQ100E103MLN3S EKMQ100E153MLP1S EKMQ100E223MM40S EKMQ100E333MP50S EKMQ160E221MF11D EKMQ160E331MF11D EKMQ160E471MHB5D EKMQ160E102MJC5S EKMQ160E222MJ20S EKMQ160E332MK25S EKMQ160E472ML25S EKMQ160E682ML25S EKMQ160E103MLP1S EKMQ160E153MM40S EKMQ160E223MP40S EKMQ250E101ME11D EKMQ250E221MF11D EKMQ250E331MHB5D EKMQ250E471MJC5S EKMQ250E102MJ16S EKMQ250E222MK25S EKMQ250E332ML25S EKMQ250E472ML25S EKMQ250E682MLP1S EKMQ250E103MM40S EKMQ250E153MP50S EKMQ350E470ME11D EKMQ350E680MF11D EKMQ350E101MF11D EKMQ350E221MHB5D EKMQ350E331MJC5S EKMQ350E471MJ16S EKMQ350E102MK20S EKMQ350E222ML25S EKMQ350E332MLN3S EKMQ350E472MLP1S EKMQ350E682MM40S EKMQ350E103MP50S EKMQ500E1R0ME11D EKMQ500E2R2ME11D EKMQ500E3R3ME11D EKMQ500E4R7ME11D EKMQ500E100ME11D EKMQ500E220ME11D EKMQ500E330ME11D EKMQ500E470MF11D EKMQ500E680MF11D EKMQ500E101MHB5D EKMQ500E221MJC5S 50 63 100 160 200 250 350 Cap (F) 330 470 1,000 2,200 3,300 4,700 6,800 22 33 47 68 100 220 330 470 1,000 2,200 3,300 4,700 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 470 1,000 2,200 10 22 33 47 68 100 220 330 470 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 3.3 4.7 10 22 33 47 68 100 220 2.2 3.3 4.7 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 35.5 20 x 40 22 x 50 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 35.5 20 x 40 22 x 50 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 25 18 x 35.5 22 x 50 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 31.5 18 x 35.5 18 x 40 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 40 6.3 x 11 6.3 x 11 10 x 12.5 10 x 20 10 x 20 12.5 x 20 16 x 25 16 x 25 18 x 35.5 6.3 x 11 8 x 11.5 8 x 11.5 0.12 0.12 0.12 0.14 0.16 0.18 0.22 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.14 0.16 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 410 540 950 1,410 1,770 2,100 2,500 71 100 120 155 200 335 510 640 930 1,650 1,950 2,450 15 21 29 32 50 93 130 140 190 240 390 540 715 960 1,750 41 92 125 150 250 310 540 705 855 16 25 30 35 57 105 140 195 250 335 500 675 28 35 71 105 140 190 270 310 485 21 30 39 Part No. EKMQ500E331MJ16S EKMQ500E471MJ20S EKMQ500E102MK25S EKMQ500E222MLN3S EKMQ500E332MMP1S EKMQ500E472MN40S EKMQ500E682MP50S EKMQ630E220ME11D EKMQ630E330MF11D EKMQ630E470MF11D EKMQ630E680MHB5D EKMQ630E101MHB5D EKMQ630E221MJ16S EKMQ630E331MJ20S EKMQ630E471MK20S EKMQ630E102ML25S EKMQ630E222MMP1S EKMQ630E332MN40S EKMQ630E472MP50S EKMQ101E1R0ME11D EKMQ101E2R2ME11D EKMQ101E3R3ME11D EKMQ101E4R7ME11D EKMQ101E100ME11D EKMQ101E220MF11D EKMQ101E330MHB5D EKMQ101E470MHB5D EKMQ101E680MJC5S EKMQ101E101MJ16S EKMQ101E221MK20S EKMQ101E331MK25S EKMQ101E471ML25S EKMQ101E102MMP1S EKMQ101E222MP50S EKMQ161E100MHB5D EKMQ161E220MJC5S EKMQ161E330MJ16S EKMQ161E470MJ20S EKMQ161E680MK20S EKMQ161E101MK25S EKMQ161E221MLN3S EKMQ161E331MMP1S EKMQ161E471MM40S EKMQ201E1R0MF11D EKMQ201E2R2MF11D EKMQ201E3R3MF11D EKMQ201E4R7MF11D EKMQ201E100MHB5D EKMQ201E220MJ16S EKMQ201E330MJ20S EKMQ201E470MK20S EKMQ201E680MK25S EKMQ201E101ML25S EKMQ201E221MLP1S EKMQ201E331MM40S EKMQ251E3R3MF11D EKMQ251E4R7MF11D EKMQ251E100MJC5S EKMQ251E220MJ20S EKMQ251E330MJ20S EKMQ251E470MK20S EKMQ251E680ML25S EKMQ251E101ML25S EKMQ251E221MMP1S EKMQ351E2R2MF11D EKMQ351E3R3MHB5D EKMQ351E4R7MHB5D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 136 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105 KMQSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 10 22 33 47 68 100 1.0 2.2 3.3 4.7 10 22 33 47 68 100 is not solvent resistant. Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 10 x 12.5 12.5x 20 12.5x25 16 x25 16 x25 18 x31.5 6.3 x11 8 x11.5 8 x11.5 10 x12.5 10 x16 12.5 x25 16 x25 16 x25 16 x31.5 18 x35.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 64 130 170 230 285 375 15 27 34 42 64 145 195 200 240 310 Part No. EKMQ351E100MJC5S EKMQ351E220MK20S EKMQ351E330MK25S EKMQ351E470ML25S EKMQ351E680ML25S EKMQ351E101MMN3S EKMQ401E1R0MF11D EKMQ401E2R2MHB5D EKMQ401E3R3MHB5D EKMQ401E4R7MJC5S EKMQ401E100MJ16S EKMQ401E220MK25S EKMQ401E330ML25S EKMQ401E470ML25S EKMQ401E680MLN3S EKMQ401E101MMP1S WV (Vdc) Cap (F) 450 2.2 3.3 4.7 10 22 33 47 68 100 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 20 28 32 56 100 125 155 185 200 Part No. EKMQ451E2R2MHB5D EKMQ451E3R3MJC5S EKMQ451E4R7MJC5S EKMQ451E100MJ20S EKMQ451E220MK25S EKMQ451E330ML25S EKMQ451E470MLN3S EKMQ451E680MMP1S EKMQ451E101MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers (5 to18) Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 68 to 1,000 to 50 0.65 0.75 0.80 0.85 (20 to22) 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Capacitance(F) Frequency(Hz) 6.3 to 50 63 to 100 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 100k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 137 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SMG Series Downsized, 85 SMQ P132 Downsized Endurance : 2,000 hours at 85 Solvent resistant type except 315 to 450Vdc (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SMG SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85(6.3 to 400Vdc) -25 to +85(450Vdc) 6.3 to 450Vdc 20% (M) (at 20, 120Hz) 160 to 450Vdc Time After 1minute CV CV1,000 I=0.1CV+40 max. CV1,000 I=0.04CV+100 max. 6.3 to 100Vdc I=0.03CV or 4A, whichever is greater. 18 After 5minute I=0.03CV+15 max. I=0.02CV+25 max. (at 20) (at 20 after 3 minutes) (at 20 after 1 minute) I=0.03CV 20 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V 0.20 0.24 0.24 18 0.34 0.24 0.20 0.16 0.14 0.12 0.09 0.08 tan(Max.) 0.15 0.15 0.20 20 0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V 5 4 3 2 2 2 2 2 3 6 6 18 Z(-25)/Z(+20) 5 4 3 2 2 2 2 2 4 6 6 20 Z(-40)/Z(+20) 18 12 10 8 5 4 3 3 3 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change 20% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Sleeve (PET : Black) F0.5 Code : E 5 to 18 D' d Terminal 15min. L' Vent (except 5) 4min. (5 to 10) (12.5 to 18) D' d Sleeve (PET : Black) 20 F0.5 Gas escape end seal L' Vent 15min. 4min. 5 D d 0.5 2.0 F D' L' 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 22 18 20 0.8 1.0 1.0 7.5 10.0 10.0 D+0.5max. L+2.0max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MG A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,100V:101,315V:3B1) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 138 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85 SMGSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (F) 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 10,000 15,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 220 330 470 1,000 2,200 3,300 4,700 6,800 6,800 10,000 10,000 12,000 15,000 15,000 15,000 18,000 22,000 100 220 330 470 1,000 2,200 3,300 4,700 4,700 6,800 6,800 8,200 10,000 10,000 10,000 12,000 12,000 15,000 47 100 220 330 470 1,000 2,200 3,300 3,300 4,700 4,700 5,600 6,800 6,800 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 5 x11 6.3x11 6.3x11 8 x11.5 10 x20 10 x20 12.5x 20 12.5x 25 16 x25 20 x25 16 x35.5 20 x30 20 x35 22 x30 18 x40 20 x40 22 x35 22 x40 5 x11 6.3x11 6.3x11 10 x12.5 10 x20 12.5x 20 12.5x 25 16 x25 20 x20 16 x35.5 20 x25 20 x30 18 x35.5 20 x35 22 x30 22 x35 22 x40 5 x11 6.3x11 8 x11.5 8 x11.5 10 x16 12.5x 20 12.5x 25 16 x25 20 x20 16 x31.5 20 x25 20 x30 18 x35.5 20 x35 22 x30 20 x40 22 x35 22 x40 5 x11 6.3x11 8 x11.5 8 x11.5 10 x12.5 10 x20 12.5x 25 16 x25 20 x20 16 x31.5 20 x25 20 x30 18 x35.5 20 x35 0.34 0.34 0.34 0.34 0.36 0.38 0.40 0.44 0.52 0.46 0.62 0.56 0.62 0.62 0.76 0.70 0.70 0.80 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.34 0.42 0.42 0.46 0.52 0.52 0.52 0.58 0.66 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.26 0.30 0.30 0.34 0.38 0.38 0.38 0.42 0.42 0.48 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.20 0.22 0.22 0.24 0.26 0.26 200 270 320 540 1,000 1,185 1,545 1,915 2,330 2,310 2,845 2,660 2,890 2,860 3,320 3,130 3,130 3,280 240 290 350 650 1,070 1,420 1,780 2,220 2,080 2,670 2,410 2,620 3,080 2,870 2,660 3,050 3,480 160 260 370 440 785 1,295 1,655 2,090 1,960 2,520 2,330 2,500 2,920 2,720 2,660 2,900 2,900 3,380 115 190 330 440 545 955 1,540 1,975 1,850 2,420 2,420 2,430 2,880 2,680 WV (Vdc) Part No. ESMG6R3E221ME11D ESMG6R3E331MF11D ESMG6R3E471MF11D ESMG6R3E102MHB5D ESMG6R3E222MJ20S ESMG6R3E332MJ20S ESMG6R3E472MK20S ESMG6R3E682MK25S ESMG6R3E103ML25S ESMG6R3E103MN25S ESMG6R3E153MLP1S ESMG6R3E153MN30S ESMG6R3E183MN35S ESMG6R3E183MP30S ESMG6R3E223MM40S ESMG6R3E223MN40S ESMG6R3E223MP35S ESMG6R3E273MP40S ESMG100E221ME11D ESMG100E331MF11D ESMG100E471MF11D ESMG100E102MJC5S ESMG100E222MJ20S ESMG100E332MK20S ESMG100E472MK25S ESMG100E682ML25S ESMG100E682MN20S ESMG100E103MLP1S ESMG100E103MN25S ESMG100E123MN30S ESMG100E153MMP1S ESMG100E153MN35S ESMG100E153MP30S ESMG100E183MP35S ESMG100E223MP40S ESMG160E101ME11D ESMG160E221MF11D ESMG160E331MHB5D ESMG160E471MHB5D ESMG160E102MJ16S ESMG160E222MK20S ESMG160E332MK25S ESMG160E472ML25S ESMG160E472MN20S ESMG160E682MLN3S ESMG160E682MN25S ESMG160E822MN30S ESMG160E103MMP1S ESMG160E103MN35S ESMG160E103MP30S ESMG160E123MN40S ESMG160E123MP35S ESMG160E153MP40S ESMG250E470ME11D ESMG250E101MF11D ESMG250E221MHB5D ESMG250E331MHB5D ESMG250E471MJC5S ESMG250E102MJ20S ESMG250E222MK25S ESMG250E332ML25S ESMG250E332MN20S ESMG250E472MLN3S ESMG250E472MN25S ESMG250E562MN30S ESMG250E682MMP1S ESMG250E682MN35S Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 6,800 22 x 30 8,200 20 x 40 25 8,200 22 x 35 10,000 22 x 40 12,000 22 x 40 47 5 x 11 100 6.3 x 11 220 8 x 11.5 330 10 x 12.5 470 10 x 16 1,000 12.5 x 20 2,200 16 x 25 2,200 20 x 20 35 3,300 16 x 35.5 3,300 20 x 25 3,900 20 x 30 4,700 18 x 35.5 4,700 20 x 35 4,700 22 x 30 5,600 20 x 40 5,600 22 x 35 6,800 22 x 40 1.0 5 x 11 2.2 5 x 11 3.3 5 x 11 4.7 5 x 11 10 5 x 11 22 5 x 11 33 5 x 11 47 6.3 x 11 100 8 x 11.5 220 10 x 12.5 330 10 x 16 50 470 10 x 20 1,000 12.5 x 25 1,500 20 x 20 2,200 16 x 35.5 2,200 20 x 25 2,700 20 x 30 3,300 18 x 35.5 3,300 20 x 35 3,300 22 x 30 3,900 20 x 40 3,900 22 x 35 4,700 22 x 40 10 5 x 11 22 5 x 11 33 6.3 x 11 47 6.3 x 11 100 10 x 12.5 220 10 x 16 330 10 x 20 470 12.5 x 20 63 820 20 x 20 1,000 16 x 25 1,000 20 x 25 1,500 20 x 30 2,200 20 x 35 2,200 22 x 30 2,700 20 x 40 3,300 22 x 40 1.0 5 x 11 2.2 5 x 11 3.3 5 x 11 100 4.7 5 x 11 10 6.3 x 11 22 8 x 11.5 0.26 0.30 0.30 0.34 0.38 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.18 0.18 0.18 0.20 0.20 0.20 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.16 0.16 0.16 0.16 0.16 0.18 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.11 0.11 0.11 0.13 0.08 0.08 0.08 0.08 0.08 0.08 2,510 2,810 2,810 3,240 3,240 130 210 385 490 645 1,145 1,785 1,670 2,275 2,050 2,310 2,700 2,510 2,380 2,690 2,690 3,090 17 28 35 41 60 95 125 155 260 430 585 755 1,340 1,570 2,075 1,880 2,150 2,500 2,420 2,420 2,590 2,590 2,960 65 100 140 170 300 490 710 900 1,370 1,300 1,600 1,850 2,330 2,190 2,640 2,810 21 30 40 45 75 130 Part No. ESMG250E682MP30S ESMG250E822MN40S ESMG250E822MP35S ESMG250E103MP40S ESMG250E123MP40S ESMG350E470ME11D ESMG350E101MF11D ESMG350E221MHB5D ESMG350E331MJC5S ESMG350E471MJ16S ESMG350E102MK20S ESMG350E222ML25S ESMG350E222MN20S ESMG350E332MLP1S ESMG350E332MN25S ESMG350E392MN30S ESMG350E472MMP1S ESMG350E472MN35S ESMG350E472MP30S ESMG350E562MN40S ESMG350E562MP35S ESMG350E682MP40S ESMG500E1R0ME11D ESMG500E2R2ME11D ESMG500E3R3ME11D ESMG500E4R7ME11D ESMG500E100ME11D ESMG500E220ME11D ESMG500E330ME11D ESMG500E470MF11D ESMG500E101MHB5D ESMG500E221MJC5S ESMG500E331MJ16S ESMG500E471MJ20S ESMG500E102MK25S ESMG500E152MN20S ESMG500E222MLP1S ESMG500E222MN25S ESMG500E272MN30S ESMG500E332MMP1S ESMG500E332MN35S ESMG500E332MP30S ESMG500E392MN40S ESMG500E392MP35S ESMG500E472MP40S ESMG630E100ME11D ESMG630E220ME11D ESMG630E330MF11D ESMG630E470MF11D ESMG630E101MJC5S ESMG630E221MJ16S ESMG630E331MJ20S ESMG630E471MK20S ESMG630E821MN20S ESMG630E102ML25S ESMG630E102MN25S ESMG630E152MN30S ESMG630E222MN35S ESMG630E222MP30S ESMG630E272MN40S ESMG630E332MP40S ESMG101E1R0ME11D ESMG101E2R2ME11D ESMG101E3R3ME11D ESMG101E4R7ME11D ESMG101E100MF11D ESMG101E220MHB5D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 139 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85 SMGSeries STANDARD RATINGS WV (Vdc) 100 160 200 250 Cap (F) 33 47 100 220 330 330 470 680 820 1,000 1,000 1,200 3.3 4.7 10 22 33 47 100 220 220 330 330 390 390 470 470 560 3.3 4.7 10 22 33 47 100 100 180 220 220 270 330 330 390 390 470 560 2.2 3.3 4.7 10 22 33 47 82 100 100 120 180 220 220 220 270 270 330 is not solvent resistant. Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 8x 11.5 10x 12.5 10x 20 12.5x 25 12.5x 25 20x 20 16x 25 20x 30 22x 30 18 x 40 20 x35 22 x40 6.3x11 6.3x 11 10x 12.5 10x 20 10x 20 12.5x 20 12.5x 25 16x 31.5 20x 25 18x 35.5 20x 30 20x 35 22x 30 20x 40 22x 35 22x 40 6.3x 11 8x 11.5 10 x12.5 10 x20 10 x20 12.5 x20 16x 25 20x 20 20x 25 18 x35.5 20 x30 20 x30 20x 35 22x 30 20x 40 22x 30 22x 40 22x 40 6.3x 11 8x11.5 8x11.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 20 x20 16 x31.5 20 x25 20 x25 20 x30 18 x40 20 x35 22 x30 20 x40 22 x35 22 x40 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.20 0.15 0.15 0.15 0.20 0.15 0.15 0.15 0.15 0.15 180 230 370 620 760 870 1,000 1,360 1,540 1,380 1,720 1,980 40 48 94 170 205 270 430 760 730 995 920 1,160 1,160 1,340 1,340 1,470 40 55 94 170 205 270 475 460 660 810 750 830 1,070 1,070 1,190 1,160 1,350 1,430 32 46 55 105 170 230 295 420 515 490 530 680 825 780 820 880 880 1,060 WV (Vdc) Part No. ESMG101E330MHB5D ESMG101E470MJC5S ESMG101E101MJ20S ESMG101E221MK25S ESMG101E331MK25S ESMG101E331MN20S ESMG101E471ML25S ESMG101E681MN30S ESMG101E821MP30S ESMG101E102MM40S ESMG101E102MN35S ESMG101E122MP40S ESMG161E3R3MF11D ESMG161E4R7MF11D ESMG161E100MJC5S ESMG161E220MJ20S ESMG161E330MJ20S ESMG161E470MK20S ESMG161E101MK25S ESMG161E221MLN3S ESMG161E221MN25S ESMG161E331MMP1S ESMG161E331MN30S ESMG161E391MN35S ESMG161E391MP30S ESMG161E471MN40S ESMG161E471MP35S ESMG161E561MP40S ESMG201E3R3MF11D ESMG201E4R7MHB5D ESMG201E100MJC5S ESMG201E220MJ20S ESMG201E330MJ20S ESMG201E470MK20S ESMG201E101ML25S ESMG201E101MN20S ESMG201E181MN25S ESMG201E221MMP1S ESMG201E221MN30S ESMG201E271MN30S ESMG201E331MN35S ESMG201E331MP30S ESMG201E391MN40S ESMG201E391MP30S ESMG201E471MP40S ESMG201E561MP40S ESMG251E2R2MF11D ESMG251E3R3MHB5D ESMG251E4R7MHB5D ESMG251E100MJ16S ESMG251E220MJ20S ESMG251E330MK20S ESMG251E470MK25S ESMG251E820MN20S ESMG251E101MLN3S ESMG251E101MN25S ESMG251E121MN25S ESMG251E181MN30S ESMG251E221MM40S ESMG251E221MN35S ESMG251E221MP30S ESMG251E271MN40S ESMG251E271MP35S ESMG251E331MP40S 315 350 400 450 Cap (F) 47 68 82 100 120 180 180 220 1.0 2.2 3.3 4.7 10 22 33 47 47 68 100 100 120 1.0 2.2 3.3 4.7 10 22 33 33 47 56 68 100 100 120 120 2.2 3.3 4.7 10 22 22 33 33 47 47 56 68 68 82 82 100 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 20 x 20 20 x 25 20 x 25 20 x 30 20 x 30 20 x 40 22 x 35 22 x 40 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 16 x 25 16 x 25 20 x 20 20 x 25 18 x 31.5 20 x 30 20 x 35 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 25 20 x 20 16 x 31.5 20 x 25 20 x 30 20 x 35 22 x 30 20 x 40 22 x 35 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 20 x 20 16 x 31.5 20 x 25 16 x 35.5 20 x 25 20 x 30 20 x 35 22 x 30 20 x 40 22 x 35 22 x 40 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.15 0.15 0.24 0.15 0.15 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.15 0.24 0.15 0.15 0.15 0.15 0.15 0.15 0.24 0.24 0.24 0.24 0.24 0.20 0.24 0.20 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.20 310 400 440 500 550 720 720 810 22 38 46 65 115 185 275 325 310 400 530 500 560 22 38 54 71 115 205 275 260 350 350 420 520 520 580 580 32 44 56 91 165 180 215 240 265 290 320 370 370 420 420 470 Part No. ESMG3B1E470MN20S ESMG3B1E680MN25S ESMG3B1E820MN25S ESMG3B1E101MN30S ESMG3B1E121MN30S ESMG3B1E181MN40S ESMG3B1E181MP35S ESMG3B1E221MP40S ESMG351E1R0MF11D ESMG351E2R2MHB5D ESMG351E3R3MHB5D ESMG351E4R7MJC5S ESMG351E100MJ20S ESMG351E220MK20S ESMG351E330ML25S ESMG351E470ML25S ESMG351E470MN20S ESMG351E680MN25S ESMG351E101MMN3S ESMG351E101MN30S ESMG351E121MN35S ESMG401E1R0MF11D ESMG401E2R2MHB5D ESMG401E3R3MJC5S ESMG401E4R7MJ16S ESMG401E100MJ20S ESMG401E220MK25S ESMG401E330ML25S ESMG401E330MN20S ESMG401E470MLN3S ESMG401E560MN25S ESMG401E680MN30S ESMG401E101MN35S ESMG401E101MP30S ESMG401E121MN40S ESMG401E121MP35S ESMG451E2R2MJC5S ESMG451E3R3MJ16S ESMG451E4R7MJ20S ESMG451E100MK20S ESMG451E220ML25S ESMG451E220MN20S ESMG451E330MLN3S ESMG451E330MN25S ESMG451E470MLP1S ESMG451E470MN25S ESMG451E560MN30S ESMG451E680MN35S ESMG451E680MP30S ESMG451E820MN40S ESMG451E820MP35S ESMG451E101MP40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 140 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85 SMGSeries RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers (5 to18) Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 47 to 1,000 to 50 0.65 0.75 0.80 0.85 (20, 22) 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Frequency(Hz) Capacitance(F) 6.3 63 160 315 to to to to 50 100 250 450 50 0.95 0.92 0.81 0.77 120 1.00 1.00 1.00 1.00 300 1.03 1.07 1.17 1.16 1k 1.05 1.13 1.32 1.30 10k 1.08 1.19 1.45 1.41 100k 1.08 1.20 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 141 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KMG Series Standard, Downsized, 105 KMQ P135 Downsized Endurance with ripple current : 1,000 to 2,000 hours at 105 Solvent resistant type except 350 to 450Vdc (see PRECAUTIONS AND GUIDELINES) RoHS Compliant KMG SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105(6.3 to 100Vdc) -40 to +105(160 to 400Vdc) -25 to +105(450Vdc) 6.3 to 450Vdc 20% (M) 6.3 to 100Vdc I=0.03CV or 4A, whichever is greater. (at 20, 120Hz) 160 to 450Vdc Time After 1minute CV CV1,000 I=0.1CV+40 max. CV1,000 I=0.04CV+100 max. After 5minutes I=0.03CV+15 max. I=0.02CV+25 max. (at 20) (at 20 after 1 minute) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tan (Max.) 0.34 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V Z(-25)/Z(+20) 5 4 3 2 2 2 2 2 3 6 6 Z(-40)/Z(+20) 12 10 8 5 4 3 3 3 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions 1): 160Vdc and larger, 2) :12.5 and larger) at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vcd 160 to 450Vdc Capacitance change 20% of the initial value 20% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' 15min. 4min. (5 to10) Vent (except5) (12.5 to 18) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max L+1.5max 16 0.8 7.5 18 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMG A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 142 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, Downsized, 105 KMGSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 47 100 220 330 470 1,000 2,200 3,300 4,700 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 2,200 3,300 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 5 x11 6.3x11 6.3x11 8 x11.5 10 x20 10 x20 12.5x 20 12.5x 25 16 x25 16 x35.5 18 x40 6.3x11 6.3x11 8 x11.5 10 x12.5 10 x20 12.5x 20 12.5x 25 16 x25 16 x35.5 18 x35.5 5 x11 6.3x11 8 x11.5 8 x11.5 10 x16 12.5x 20 12.5x 25 16 x25 16 x31.5 18 x35.5 5 x11 6.3x11 8 x11.5 8 x11.5 10 x12.5 10 x20 12.5x 25 16 x25 16 x31.5 18 x35.5 5 x11 6.3x11 8 x11.5 10 x12.5 10 x16 12.5x 20 16 x25 16 x35.5 18 x35.5 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 5 x11 6.3x11 8 x11.5 10 x12.5 10 x16 10 x20 12.5x 25 16 x35.5 18 x35.5 0.34 0.34 0.34 0.34 0.36 0.38 0.40 0.44 0.52 0.62 0.76 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 140 190 230 380 710 840 1,090 1,350 1,650 2,010 2,350 170 200 250 460 760 1,000 1,260 1,570 1,890 2,180 110 180 260 310 560 920 1,170 1,480 1,780 2,060 80 130 230 310 380 680 1,090 1,400 1,710 2,040 90 150 270 350 460 810 1,260 1,610 1,910 13 20 25 30 40 65 90 110 180 300 410 530 950 1,470 1,770 WV (Vdc) Part No. EKMG6R3E221ME11D EKMG6R3E331MF11D EKMG6R3E471MF11D EKMG6R3E102MHB5D EKMG6R3E222MJ20S EKMG6R3E332MJ20S EKMG6R3E472MK20S EKMG6R3E682MK25S EKMG6R3E103ML25S EKMG6R3E153MLP1S EKMG6R3E223MM40S EKMG100E221MF11D EKMG100E331MF11D EKMG100E471MHB5D EKMG100E102MJC5S EKMG100E222MJ20S EKMG100E332MK20S EKMG100E472MK25S EKMG100E682ML25S EKMG100E103MLP1S EKMG100E153MMP1S EKMG160E101ME11D EKMG160E221MF11D EKMG160E331MHB5D EKMG160E471MHB5D EKMG160E102MJ16S EKMG160E222MK20S EKMG160E332MK25S EKMG160E472ML25S EKMG160E682MLN3S EKMG160E103MMP1S EKMG250E470ME11D EKMG250E101MF11D EKMG250E221MHB5D EKMG250E331MHB5D EKMG250E471MJC5S EKMG250E102MJ20S EKMG250E222MK25S EKMG250E332ML25S EKMG250E472MLN3S EKMG250E682MMP1S EKMG350E470ME11D EKMG350E101MF11D EKMG350E221MHB5D EKMG350E331MJC5S EKMG350E471MJ16S EKMG350E102MK20S EKMG350E222ML25S EKMG350E332MLP1S EKMG350E472MMP1S EKMG500E1R0ME11D EKMG500E2R2ME11D EKMG500E3R3ME11D EKMG500E4R7ME11D EKMG500E100ME11D EKMG500E220ME11D EKMG500E330ME11D EKMG500E470MF11D EKMG500E101MHB5D EKMG500E221MJC5S EKMG500E331MJ16S EKMG500E471MJ20S EKMG500E102MK25S EKMG500E222MLP1S EKMG500E332MMP1S 63 100 160 200 250 350 400 : Enter the appropriate lead forming or taping code. Cap (F) 10 22 33 47 100 220 330 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 3.3 4.7 10 22 33 47 100 220 330 3.3 4.7 10 22 33 47 100 220 2.2 3.3 4.7 10 22 33 47 100 220 1.0 2.2 3.3 4.7 10 22 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 100 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 5 x 11 5 x 11 6.3 x 11 6.3 x 11 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 40 6.3 x 11 6.3 x 11 10 x 12.5 10 x 20 10 x 20 12.5 x 20 16 x 25 16 x 31.5 18 x 35.5 6.3 x 11 8 x 11.5 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 25 18 x 35.5 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 31.5 18 x 40 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 25 18 x 31.5 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 25 16 x 31.5 16 x 40 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 46 71 100 120 215 335 510 640 930 15 21 29 32 54 93 130 165 265 440 540 715 985 28 34 67 120 145 195 335 540 705 28 39 74 120 160 195 335 575 23 32 39 74 130 160 210 365 585 15 26 38 50 80 130 195 230 375 15 26 38 50 80 145 195 250 350 Part No. EKMG630E100ME11D EKMG630E220ME11D EKMG630E330MF11D EKMG630E470MF11D EKMG630E101MJC5S EKMG630E221MJ16S EKMG630E331MJ20S EKMG630E471MK20S EKMG630E102ML25S EKMG101E1R0ME11D EKMG101E2R2ME11D EKMG101E3R3ME11D EKMG101E4R7ME11D EKMG101E100MF11D EKMG101E220MHB5D EKMG101E330MHB5D EKMG101E470MJC5S EKMG101E101MJ20S EKMG101E221MK25S EKMG101E331ML25S EKMG101E471MLN3S EKMG101E102MM40S EKMG161E3R3MF11D EKMG161E4R7MF11D EKMG161E100MJC5S EKMG161E220MJ20S EKMG161E330MJ20S EKMG161E470MK20S EKMG161E101ML25S EKMG161E221MLN3S EKMG161E331MMP1S EKMG201E3R3MF11D EKMG201E4R7MHB5D EKMG201E100MJ16S EKMG201E220MJ20S EKMG201E330MK20S EKMG201E470MK20S EKMG201E101ML25S EKMG201E221MMP1S EKMG251E2R2MF11D EKMG251E3R3MHB5D EKMG251E4R7MHB5D EKMG251E100MJ16S EKMG251E220MK20S EKMG251E330MK20S EKMG251E470MK25S EKMG251E101MLN3S EKMG251E221MM40S EKMG351E1R0MF11D EKMG351E2R2MHB5D EKMG351E3R3MJC5S EKMG351E4R7MJ16S EKMG351E100MJ20S EKMG351E220MK20S EKMG351E330ML25S EKMG351E470ML25S EKMG351E101MMN3S EKMG401E1R0MF11D EKMG401E2R2MHB5D EKMG401E3R3MJC5S EKMG401E4R7MJ16S EKMG401E100MJ20S EKMG401E220MK25S EKMG401E330ML25S EKMG401E470MLN3S EKMG401E101ML40S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 143 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, Downsized, 105 KMGSeries STANDARD RATINGS is not solvent resistant. WV (Vdc) Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 450 2.2 3.3 4.7 10 22 33 47 10x12.5 10x16 10x20 12.5 x20 16 x25 16 x31.5 16 x35.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 23 31 40 65 115 155 185 Part No. EKMG451E2R2MJC5S EKMG451E3R3MJ16S EKMG451E4R7MJ20S EKMG451E100MK20S EKMG451E220ML25S EKMG451E330MLN3S EKMG451E470MLP1S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 47 to 1,000 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 144 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 85 SME-BP Series Standard Bi-polar type Endurance : 2,000 hours at 85 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.06CV or 10A, whichever is greater. (at 20 after 2 minutes) I=0.03CV or 3A, whichever is greater. (at 20 after 5 minutes) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.24 0.24 0.20 0.20 0.16 0.14 0.12 0.12 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 2 Z(-40)/Z(+20) 10 8 6 4 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 85, however the polarization shall be reversed every 250 hours. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] D' d Sleeve (PET : Black) F0.5 Code : E F0.5 Terminal L' 15min. 4min. (5 to 10) Vent (except5) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 (12.5 to 18) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 B SME AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,16V:160,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 145 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 85 SME-BPSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (F) 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 10 22 33 47 100 220 330 470 1,000 2,200 3,300 10 22 33 47 100 220 330 470 1,000 2,200 4.7 10 22 33 47 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 5x 11 5x 11 6.3x 11 8x 11.5 8x 11.5 10x 12.5 10 x 20 12.5x 25 16x25 16x31.5 18x35.5 5x 11 5 x11 5 x11 6.3 x11 8 x11.5 10 x16 10 x16 12.5x20 16 x25 16 x31.5 18 x35.5 5x 11 5 x11 5 x11 6.3 x11 8 x11.5 10 x12.5 10 x16 10 x20 12.5 x25 16 x31.5 18 x35.5 5 x11 6.3 x11 6.3 x11 6.3 x11 8 x11.5 10 x16 12.5 x20 12.5 x20 16 x25 18 x35.5 5 x11 5 x11 6.3x 11 8x 11.5 8x 11.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.16 0.16 0.16 0.16 0.16 64 76 125 215 265 370 650 1,160 1,570 2,020 2,600 57 64 76 125 215 345 410 720 1,280 1,690 2,160 42 57 70 95 160 275 375 485 855 1,510 1,980 42 65 80 95 160 305 450 540 950 1,620 34 43 73 100 120 WV (Vdc) Part No. BSME6R3E330ME11D BSME6R3E470ME11D BSME6R3E101MF11D BSME6R3E221MHB5D BSME6R3E331MHB5D BSME6R3E471MJC5S BSME6R3E102MJ20S BSME6R3E222MK25S BSME6R3E332ML25S BSME6R3E472MLN3S BSME6R3E682MMP1S BSME100E220ME11D BSME100E330ME11D BSME100E470ME11D BSME100E101MF11D BSME100E221MHB5D BSME100E331MJ16S BSME100E471MJ16S BSME100E102MK20S BSME100E222ML25S BSME100E332MLN3S BSME100E472MMP1S BSME160E100ME11D BSME160E220ME11D BSME160E330ME11D BSME160E470MF11D BSME160E101MHB5D BSME160E221MJC5S BSME160E331MJ16S BSME160E471MJ20S BSME160E102MK25S BSME160E222MLN3S BSME160E332MMP1S BSME250E100ME11D BSME250E220MF11D BSME250E330MF11D BSME250E470MF11D BSME250E101MHB5D BSME250E221MJ16S BSME250E331MK20S BSME250E471MK20S BSME250E102ML25S BSME250E222MMP1S BSME350E4R7ME11D BSME350E100ME11D BSME350E220MF11D BSME350E330MHB5D BSME350E470MHB5D 35 50 63 80 100 Cap (F) 100 220 330 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 3.3 4.7 10 22 33 47 100 220 330 470 2.2 3.3 4.7 10 22 33 47 100 220 330 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Rated ripple current Case size tan (mArms/ DxL(mm) 85, 120Hz) 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 31.5 5 x 11 5x 11 5x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 18 x 35.5 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 35.5 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 16 x 25 18 x 35.5 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 230 410 505 655 1,140 17 25 27 34 52 89 105 150 265 480 650 835 28 34 57 95 135 180 320 575 655 965 29 39 47 65 125 150 195 350 615 755 21 34 39 47 71 135 220 240 425 720 Part No. BSME350E101MJ16S BSME350E221MK20S BSME350E331MK20S BSME350E471MK25S BSME350E102MLN3S BSME500E1R0ME11D BSME500E2R2ME11D BSME500E3R3ME11D BSME500E4R7ME11D BSME500E100MF11D BSME500E220MHB5D BSME500E330MHB5D BSME500E470MJC5S BSME500E101MJ20S BSME500E221MK25S BSME500E331ML25S BSME500E471MLN3S BSME630E3R3ME11D BSME630E4R7MF11D BSME630E100MF11D BSME630E220MHB5D BSME630E330MJC5S BSME630E470MJ16S BSME630E101MK20S BSME630E221ML25S BSME630E331MLN3S BSME630E471MMP1S BSME800E2R2ME11D BSME800E3R3MF11D BSME800E4R7MF11D BSME800E100MHB5D BSME800E220MJ16S BSME800E330MJ16S BSME800E470MJ20S BSME800E101MK25S BSME800E221MLN3S BSME800E331MMP1S BSME101E1R0ME11D BSME101E2R2MF11D BSME101E3R3MF11D BSME101E4R7MF11D BSME101E100MHB5D BSME101E220MJ16S BSME101E330MK20S BSME101E470MK20S BSME101E101ML25S BSME101E221MMP1S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 47 to 1,000 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 146 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 105 KME-BP Series Standard Bi-polar type Endurance : 1,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.06CV or 10A, whichever is greater. (at 20 after 2 minutes) I=0.03CV or 3A, whichever is greater. (at 20 after 5 minutes) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.24 0.24 0.20 0.20 0.16 0.14 0.12 0.12 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 2 Z(-40)/Z(+20) 10 8 6 4 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 1,000 hours at 105, however the polarization shall be reversed every 250 hours. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 100Vdc Capacitance change 25% of the initial value 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' 15min. 4min. (5 to 10) Vent (except 5) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 (12.5 to 18) Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 B KME A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 147 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 105 KME-BPSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (F) 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 10 22 33 47 100 220 330 470 1,000 2,200 3,300 10 22 33 47 100 220 330 470 1,000 2,200 4.7 10 22 33 47 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 5x 11 5x 11 6.3x 11 8x 11.5 8x 11.5 10x 12.5 10 x 20 12.5x 25 16x25 16x31.5 18x35.5 5x 11 5 x11 5 x11 6.3 x11 8 x11.5 10 x16 10 x16 12.5x20 16 x25 16 x31.5 18 x35.5 5x 11 5 x11 5 x11 6.3 x11 8 x11.5 10 x12.5 10 x16 10 x20 12.5 x25 16 x31.5 18 x35.5 5 x11 6.3 x11 6.3 x11 6.3 x11 8 x11.5 10 x16 12.5 x20 12.5 x20 16 x25 18 x35.5 5 x11 5 x11 6.3x 11 8x 11.5 8x 11.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.16 0.16 0.16 0.16 0.16 45 54 90 150 185 260 460 820 1,110 1,430 1,830 37 45 54 90 150 240 290 510 910 1,200 1,520 27 40 49 67 110 195 265 345 605 1,070 1,400 27 46 56 67 110 215 320 380 670 1,140 21 30 51 72 86 WV (Vdc) Part No. BKME6R3E330ME11D BKME6R3E470ME11D BKME6R3E101MF11D BKME6R3E221MHB5D BKME6R3E331MHB5D BKME6R3E471MJC5S BKME6R3E102MJ20S BKME6R3E222MK25S BKME6R3E332ML25S BKME6R3E472MLN3S BKME6R3E682MMP1S BKME100E220ME11D BKME100E330ME11D BKME100E470ME11D BKME100E101MF11D BKME100E221MHB5D BKME100E331MJ16S BKME100E471MJ16S BKME100E102MK20S BKME100E222ML25S BKME100E332MLN3S BKME100E472MMP1S BKME160E100ME11D BKME160E220ME11D BKME160E330ME11D BKME160E470MF11D BKME160E101MHB5D BKME160E221MJC5S BKME160E331MJ16S BKME160E471MJ20S BKME160E102MK25S BKME160E222MLN3S BKME160E332MMP1S BKME250E100ME11D BKME250E220MF11D BKME250E330MF11D BKME250E470MF11D BKME250E101MHB5D BKME250E221MJ16S BKME250E331MK20S BKME250E471MK20S BKME250E102ML25S BKME250E222MMP1S BKME350E4R7ME11D BKME350E100ME11D BKME350E220MF11D BKME350E330MHB5D BKME350E470MHB5D 35 50 63 80 100 Cap (F) 100 220 330 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 3.3 4.7 10 22 33 47 100 220 330 470 2.2 3.3 4.7 10 22 33 47 100 220 330 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 31.5 5 x 11 5x 11 5x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 18 x 35.5 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 35.5 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 16 x 25 18 x 35.5 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 160 290 350 465 805 10 15 18 22 37 63 77 105 190 340 460 590 20 24 40 68 98 130 225 405 535 680 16 23 27 46 89 105 140 245 435 570 12 20 25 30 50 97 140 170 300 510 Part No. BKME350E101MJ16S BKME350E221MK20S BKME350E331MK20S BKME350E471MK25S BKME350E102MLN3S BKME500E1R0ME11D BKME500E2R2ME11D BKME500E3R3ME11D BKME500E4R7ME11D BKME500E100MF11D BKME500E220MHB5D BKME500E330MHB5D BKME500E470MJC5S BKME500E101MJ20S BKME500E221MK25S BKME500E331ML25S BKME500E471MLN3S BKME630E3R3ME11D BKME630E4R7MF11D BKME630E100MF11D BKME630E220MHB5D BKME630E330MJC5S BKME630E470MJ16S BKME630E101MK20S BKME630E221ML25S BKME630E331MLN3S BKME630E471MMP1S BKME800E2R2ME11D BKME800E3R3MF11D BKME800E4R7MF11D BKME800E100MHB5D BKME800E220MJ16S BKME800E330MJ16S BKME800E470MJ20S BKME800E101MK25S BKME800E221MLN3S BKME800E331MMP1S BKME101E1R0ME11D BKME101E2R2MF11D BKME101E3R3MF11D BKME101E4R7MF11D BKME101E100MHB5D BKME101E220MJ16S BKME101E330MK20S BKME101E470MK20S BKME101E101ML25S BKME101E221MMP1S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) 1.0 10 100 2,200 Frequency(Hz) to 4.7 to 47 to 1,000 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 148 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZN Series Low impedance, 105 KZN Adoption of innovative high stability electrolyte High ripple current and long endurance Rated voltage range : 6.3 to 100Vdc, Capacitance range : 8.2 to 22,000F Endurance with ripple current : 6,000 to 10,000 hours at 105 Non solvent resistant type RoHS Compliant Higher ripple KZM P152 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Z(-25)/Z(+20) 2 max. Z(-40)/Z(+20) 3 max. (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. 10x16L, 20L, 25L Case size 5&6.3 8x11.5L 10x12.5L 8x15L, 20L 12.5 to 18 6.3Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours 10,000 hours Time 10 to 50Vdc 7,000 hours 9,000 hours 9,000 hours 10,000 hours 10,000 hours 10,000 hours 63 to 100Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours Capacitance change 25% of the initial value (6.3, 10Vdc : 30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value (6.3, 10Vdc : 30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics Endurance Shelf Life DIMENSIONS [mm] d D' F0.5 Code : E Sleeve(PET : Brown) F0.5 Terminal L' 15min. 4min. (5 to 10) (12.5 to 18) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 8 10 12.5 0.6 0.6 0.6 3.5 5.0 5.0 D0.5max. L1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal Vent (Except 5 & 6.3) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZN AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 3,900F:392) Lead forming*taping code Terminal code Voltage code (ex. 16V:160 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 149 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZNSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 220 470 820 1,200 1,200 1,500 1,800 2,700 2,700 3,300 3,900 5,600 6.3 6,800 6,800 8,200 8,200 10,000 12,000 12,000 15,000 15,000 18,000 18,000 22,000 150 330 560 820 1,000 1,000 1,200 1,800 1,800 2,200 2,700 3,900 10 4,700 4,700 5,600 5,600 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 120 270 470 680 680 820 16 1,000 1,500 1,500 1,800 2,200 2,700 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.041 0.053 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.13 0.16 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 345 540 945 1,250 1,330 1,500 1,760 1,960 1,900 2,250 2,480 2,900 3,450 3,250 3,570 3,450 3,630 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,960 1,700 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,450 3,810 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKZN6R3E221ME11D EKZN6R3E471MF11D EKZN6R3E821MHB5D EKZN6R3E122MH15D EKZN6R3E122MJC5S EKZN6R3E152MH20D EKZN6R3E182MJ16S EKZN6R3E272MJ20S EKZN6R3E272MK16S EKZN6R3E332MJ25S EKZN6R3E392MK20S EKZN6R3E562MK25S EKZN6R3E682MK30S EKZN6R3E682ML20S EKZN6R3E822MK35S EKZN6R3E822MM20S EKZN6R3E103ML25S EKZN6R3E123MLN3S EKZN6R3E123MM25S EKZN6R3E153MLP1S EKZN6R3E153MMN3S EKZN6R3E183ML40S EKZN6R3E183MMP1S EKZN6R3E223MM40S EKZN100E151ME11D EKZN100E331MF11D EKZN100E561MHB5D EKZN100E821MH15D EKZN100E102MH20D EKZN100E102MJC5S EKZN100E122MJ16S EKZN100E182MJ20S EKZN100E182MK16S EKZN100E222MJ25S EKZN100E272MK20S EKZN100E392MK25S EKZN100E472MK30S EKZN100E472ML20S EKZN100E562MK35S EKZN100E562MM20S EKZN100E682ML25S EKZN100E822MLN3S EKZN100E822MM25S EKZN100E103MLP1S EKZN100E103MMN3S EKZN100E123ML40S EKZN100E123MMP1S EKZN100E153MM40S EKZN160E121ME11D EKZN160E271MF11D EKZN160E471MHB5D EKZN160E681MH15D EKZN160E681MJC5S EKZN160E821MH20D EKZN160E102MJ16S EKZN160E152MJ20S EKZN160E152MK16S EKZN160E182MJ25S EKZN160E222MK20S EKZN160E272MK25S 3,300 3,900 3,900 4,700 5,600 6,800 16 6,800 8,200 8,200 10,000 10,000 12,000 68 150 270 470 470 560 680 820 1,000 1,200 1,500 1,800 25 2,200 2,200 2,700 3,300 3,300 4,700 4,700 5,600 5,600 6,800 6,800 8,200 47 100 180 220 270 330 390 470 560 680 820 1,200 35 1,500 1,500 1,800 1,800 1,800 2,700 2,700 3,300 3,300 3,900 3,900 4,700 12.5x30 12.5x35 16x20 18x20 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.018 0.016 0.021 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.017 0.020 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.017 0.020 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.054 0.048 0.063 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.051 0.060 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.051 0.060 0.048 0.048 0.042 0.042 0.039 0.036 0.033 3,660 4,120 3,330 3,450 3,810 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,810 3,450 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,810 3,450 4,100 3,880 4,280 4,190 4,580 4,380 4,960 Part No. EKZN160E332MK30S EKZN160E392MK35S EKZN160E392ML20S EKZN160E472MM20S EKZN160E562ML25S EKZN160E682MLN3S EKZN160E682MM25S EKZN160E822MLP1S EKZN160E822MMN3S EKZN160E103ML40S EKZN160E103MMP1S EKZN160E123MM40S EKZN250E680ME11D EKZN250E151MF11D EKZN250E271MHB5D EKZN250E471MH15D EKZN250E471MJC5S EKZN250E561MH20D EKZN250E681MJ16S EKZN250E821MJ20S EKZN250E102MK16S EKZN250E122MJ25S EKZN250E152MK20S EKZN250E182MK25S EKZN250E222MK30S EKZN250E222ML20S EKZN250E272MK35S EKZN250E332ML25S EKZN250E332MM20S EKZN250E472MLN3S EKZN250E472MM25S EKZN250E562MLP1S EKZN250E562MMN3S EKZN250E682ML40S EKZN250E682MMP1S EKZN250E822MM40S EKZN350E470ME11D EKZN350E101MF11D EKZN350E181MHB5D EKZN350E221MH15D EKZN350E271MJC5S EKZN350E331MH20D EKZN350E391MJ16S EKZN350E471MJ20S EKZN350E561MK16S EKZN350E681MJ25S EKZN350E821MK20S EKZN350E122MK25S EKZN350E152MK30S EKZN350E152ML20S EKZN350E182MK35S EKZN350E182ML25S EKZN350E182MM20S EKZN350E272MLN3S EKZN350E272MM25S EKZN350E332MLP1S EKZN350E332MMN3S EKZN350E392ML40S EKZN350E392MMP1S EKZN350E472MM40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 150 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZNSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 50 63 27 56 100 120 150 180 220 330 330 390 470 680 820 820 1,000 1,200 1,200 1,500 1,500 1,800 2,200 2,200 2,700 3,300 18 39 68 100 120 120 180 270 270 330 390 560 680 680 820 820 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.40 0.18 0.085 0.065 0.073 0.049 0.053 0.038 0.045 0.032 0.032 0.025 0.023 0.026 0.021 0.022 0.025 0.019 0.021 0.016 0.014 0.016 0.013 0.012 0.52 0.24 0.15 0.10 0.077 0.090 0.061 0.045 0.058 0.037 0.033 0.026 0.024 0.027 0.022 0.026 0.024 0.020 0.022 0.018 0.018 0.016 0.017 0.015 1.3 0.54 0.26 0.20 0.22 0.16 0.16 0.12 0.14 0.10 0.10 0.080 0.074 0.084 0.067 0.070 0.075 0.057 0.063 0.048 0.042 0.048 0.039 0.036 2.3 1.1 0.68 0.45 0.35 0.36 0.25 0.18 0.18 0.12 0.10 0.080 0.075 0.085 0.068 0.078 0.072 0.060 0.066 0.054 0.054 0.048 0.051 0.045 450 700 1,200 1,600 1,280 1,960 1,650 2,060 2,160 2,420 2,300 2,800 3,370 3,070 3,810 3,510 3,120 4,030 3,530 4,220 4,500 4,080 4,270 4,850 240 420 720 990 1,200 990 1,200 1,570 1,570 1,990 1,990 2,460 2,760 2,380 3,040 2,530 2,890 3,280 2,930 3,440 3,380 3,690 3,550 3,930 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKZN500E270ME11D EKZN500E560MF11D EKZN500E101MHB5D EKZN500E121MH15D EKZN500E151MJC5S EKZN500E181MH20D EKZN500E221MJ16S EKZN500E331MJ20S EKZN500E331MK16S EKZN500E391MJ25S EKZN500E471MK20S EKZN500E681MK25S EKZN500E821MK30S EKZN500E821ML20S EKZN500E102MK35S EKZN500E122ML25S EKZN500E122MM20S EKZN500E152MLN3S EKZN500E152MM25S EKZN500E182MLP1S EKZN500E222ML40S EKZN500E222MMN3S EKZN500E272MMP1S EKZN500E332MM40S EKZN630E180ME11D EKZN630E390MF11D EKZN630E680MHB5D EKZN630E101MH15D EKZN630E121MH20D EKZN630E121MJC5S EKZN630E181MJ16S EKZN630E271MJ20S EKZN630E271MK16S EKZN630E331MJ25S EKZN630E391MK20S EKZN630E561MK25S EKZN630E681MK30S EKZN630E681ML20S EKZN630E821MK35S EKZN630E821MM20S EKZN630E102ML25S EKZN630E122MLN3S EKZN630E122MM25S EKZN630E152MLP1S EKZN630E152MMN3S EKZN630E182ML40S EKZN630E182MMP1S EKZN630E222MM40S 12 27 47 68 82 82 120 180 180 220 270 390 80 470 470 560 680 680 820 820 1,000 1,200 1,200 1,500 1,800 8.2 18 33 47 56 56 82 100 120 150 180 220 100 270 270 390 390 390 470 560 560 680 680 820 1,000 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 16x31.5 16x35.5 18x25 16x40 18x31.5 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.72 0.34 0.20 0.14 0.12 0.14 0.090 0.068 0.090 0.055 0.048 0.038 0.033 0.036 0.026 0.028 0.032 0.022 0.027 0.020 0.018 0.020 0.018 0.017 0.72 0.34 0.20 0.14 0.12 0.14 0.090 0.068 0.090 0.055 0.048 0.038 0.033 0.036 0.026 0.028 0.032 0.022 0.020 0.027 0.018 0.020 0.018 0.017 3.2 1.5 0.90 0.63 0.54 0.56 0.36 0.28 0.27 0.22 0.15 0.12 0.11 0.12 0.078 0.084 0.096 0.066 0.081 0.060 0.054 0.060 0.054 0.051 3.2 1.5 0.90 0.63 0.54 0.56 0.36 0.28 0.27 0.22 0.15 0.12 0.11 0.12 0.078 0.084 0.096 0.066 0.060 0.081 0.054 0.060 0.054 0.051 220 370 620 780 1,040 780 1,040 1,430 1,430 1,620 1,750 2,210 2,400 1,950 2,600 2,430 2,270 2,640 2,500 2,860 3,510 2,860 3,510 3,860 220 370 620 780 1,040 780 1,040 1,430 1,430 1,620 1,750 2,210 2,400 1,950 2,600 2,430 2,270 2,640 2,860 2,500 3,510 2,860 3,510 3,860 Part No. EKZN800E120ME11D EKZN800E270MF11D EKZN800E470MHB5D EKZN800E680MH15D EKZN800E820MH20D EKZN800E820MJC5S EKZN800E121MJ16S EKZN800E181MJ20S EKZN800E181MK16S EKZN800E221MJ25S EKZN800E271MK20S EKZN800E391MK25S EKZN800E471MK30S EKZN800E471ML20S EKZN800E561MK35S EKZN800E681ML25S EKZN800E681MM20S EKZN800E821MLN3S EKZN800E821MM25S EKZN800E102MLP1S EKZN800E122ML40S EKZN800E122MMN3S EKZN800E152MMP1S EKZN800E182MM40S EKZN101E8R2ME11D EKZN101E180MF11D EKZN101E330MHB5D EKZN101E470MH15D EKZN101E560MH20D EKZN101E560MJC5S EKZN101E820MJ16S EKZN101E101MJ20S EKZN101E121MK16S EKZN101E151MJ25S EKZN101E181MK20S EKZN101E221MK25S EKZN101E271MK30S EKZN101E271ML20S EKZN101E391MK35S EKZN101E391ML25S EKZN101E391MM20S EKZN101E471MLN3S EKZN101E561MLP1S EKZN101E561MM25S EKZN101E681ML40S EKZN101E681MMN3S EKZN101E821MMP1S EKZN101E102MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 8.2 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 22,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 151 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZM Low impedance, 105 KZN P149 Series Higher ripple Long-Life version of KZH series Endurance with ripple current : 6,000 to 10,000 hours at 105 Newly innovative electrolyte is employed to minimize ESR Rated voltage range : 6.3 to 50Vdc, Nominal capacitance range : 27 to 10,000F Non solvent resistant type RoHS Compliant KZM Longer life KZH P155 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Z(-25)/Z(+20) 2 max. Z(-40)/Z(+20) 3 max. (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 5 &6.3 : 6,000hours 8 : 8,000hours 10 to 18 : 10,000hours Capacitance change 25% of the initial value (6.3, 10Vdc : 30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value (6.3, 10Vdc : 30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve(PET : Brown) F0.5 Terminal L' 15min. 4min. (5 to 10) (12.5 to 18) D 5 d 0.5 2.0 F D' L' 6.3 0.5 2.5 10 12.5 16 8 0.6 0.6 0.6 0.8 3.5 5.0 5.0 7.5 D+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal Vent (Except5 &6.3) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZM AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 27 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 10,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 152 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZMSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (F) Case size DxL(mm) tan 220 470 820 1,200 1,200 1,500 1,800 2,200 2,700 3,900 4,700 5,600 6,800 6,800 8,200 10,000 150 330 680 1,000 1,000 1,500 1,500 1,800 2,200 3,300 3,900 4,700 4,700 5,600 6,800 8,200 100 220 470 680 680 1,000 1,000 1,500 1,800 2,200 2,700 3,300 3,300 3,900 4,700 5,600 5x 11 6.3x11 8x11.5 8x15 10 x12.5 8x 20 10 x 16 10 x20 10 x25 12.5 x20 12.5 x25 12.5x 30 12.5x 35 16 x 20 16 x25 18 x25 5x11 6.3 x11 8x11.5 8x15 10x 12.5 8x 20 10 x 16 10 x 20 10 x 25 12.5x 20 12.5x 25 12.5x 30 16 x20 12.5x35 16 x25 18 x25 5x11 6.3 x11 8x11.5 8x15 10 x12.5 8x20 10x 16 10 x 20 10 x 25 12.5x 20 12.5x 25 12.5x 30 16 x 20 12.5x 35 16 x25 18 x25 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.24 0.24 0.26 0.28 0.30 0.32 0.32 0.36 0.40 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.21 0.23 0.23 0.25 0.25 0.27 0.29 0.33 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.20 0.20 0.20 0.22 0.24 Impedance ( max./100kHz) 20 -10 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.012 0.015 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.031 0.038 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 Rated ripple current (mArms/105, 100kHz) Part No. 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,570 3,250 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 EKZM6R3E221ME11D EKZM6R3E471MF11D EKZM6R3E821MHB5D EKZM6R3E122MH15D EKZM6R3E122MJC5S EKZM6R3E152MH20D EKZM6R3E182MJ16S EKZM6R3E222MJ20S EKZM6R3E272MJ25S EKZM6R3E392MK20S EKZM6R3E472MK25S EKZM6R3E562MK30S EKZM6R3E682MK35S EKZM6R3E682ML20S EKZM6R3E822ML25S EKZM6R3E103MM25S EKZM100E151ME11D EKZM100E331MF11D EKZM100E681MHB5D EKZM100E102MH15D EKZM100E102MJC5S EKZM100E152MH20D EKZM100E152MJ16S EKZM100E182MJ20S EKZM100E222MJ25S EKZM100E332MK20S EKZM100E392MK25S EKZM100E472MK30S EKZM100E472ML20S EKZM100E562MK35S EKZM100E682ML25S EKZM100E822MM25S EKZM160E101ME11D EKZM160E221MF11D EKZM160E471MHB5D EKZM160E681MH15D EKZM160E681MJC5S EKZM160E102MH20D EKZM160E102MJ16S EKZM160E152MJ20S EKZM160E182MJ25S EKZM160E222MK20S EKZM160E272MK25S EKZM160E332MK30S EKZM160E332ML20S EKZM160E392MK35S EKZM160E472ML25S EKZM160E562MM25S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 153 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZMSeries STANDARD RATINGS WV (Vdc) 25 35 50 Cap (F) Case size DxL(mm) tan 68 150 330 390 470 560 680 820 1,000 1,500 1,800 2,200 2,200 2,700 3,300 3,900 47 100 220 270 330 390 470 560 680 1,000 1,200 1,500 1,500 1,800 2,200 2,700 27 56 100 120 150 180 220 270 330 470 560 680 820 820 1,000 1,500 5x 11 6.3x 11 8x 11.5 8x 15 10 x 12.5 8x 20 10 x16 10 x20 10 x25 12.5 x20 12.5 x25 12.5 x30 16 x20 12.5 x35 16x 25 18x 25 5x 11 6.3x 11 8x 11.5 8x 15 10 x 12.5 8x 20 10 x16 10 x20 10 x25 12.5x20 12.5x25 12.5x30 16 x20 12.5 x35 16 x25 18x 25 5x11 6.3 x11 8x11.5 8x15 10 x12.5 8x 20 10x 16 10 x 20 10 x 25 12.5x20 12.5x25 12.5x30 12.5x35 16 x20 16 x25 18 x25 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Impedance ( max./100kHz) 20 -10 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.34 0.14 0.074 0.061 0.061 0.046 0.042 0.030 0.028 0.027 0.023 0.021 0.019 0.023 0.021 0.019 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 1.18 0.50 0.22 0.18 0.18 0.14 0.12 0.090 0.085 0.068 0.059 0.052 0.051 0.059 0.056 0.051 Rated ripple current (mArms/105, 100kHz) Part No. 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 238 385 724 950 979 1,190 1,370 1,580 1,870 2,050 2,410 2,860 2,960 2,730 3,010 3,290 EKZM250E680ME11D EKZM250E151MF11D EKZM250E331MHB5D EKZM250E391MH15D EKZM250E471MJC5S EKZM250E561MH20D EKZM250E681MJ16S EKZM250E821MJ20S EKZM250E102MJ25S EKZM250E152MK20S EKZM250E182MK25S EKZM250E222MK30S EKZM250E222ML20S EKZM250E272MK35S EKZM250E332ML25S EKZM250E392MM25S EKZM350E470ME11D EKZM350E101MF11D EKZM350E221MHB5D EKZM350E271MH15D EKZM350E331MJC5S EKZM350E391MH20D EKZM350E471MJ16S EKZM350E561MJ20S EKZM350E681MJ25S EKZM350E102MK20S EKZM350E122MK25S EKZM350E152MK30S EKZM350E152ML20S EKZM350E182MK35S EKZM350E222ML25S EKZM350E272MM25S EKZM500E270ME11D EKZM500E560MF11D EKZM500E101MHB5D EKZM500E121MH15D EKZM500E151MJC5S EKZM500E181MH20D EKZM500E221MJ16S EKZM500E271MJ20S EKZM500E331MJ25S EKZM500E471MK20S EKZM500E561MK25S EKZM500E681MK30S EKZM500E821MK35S EKZM500E821ML20S EKZM500E102ML25S EKZM500E152MM25S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 154 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZH Low impedance, 105 KZM P152 Series Longer life KZH Newly innovative electrolyte is employed to minimize impedance Endurance with ripple current: 5,000 to 6,000 hours at 105 Non solvent resistant type RoHS Compliant Lower Z KZE P157 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 35Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tan(Max.) 0.22 0.19 0.16 0.14 0.12 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. Z (-25) / Z (+20) 2max. Z (-40) / Z (+20) 3max. Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)for the specified period of time at 105. Time 5 &6.3 : 5,000hours8 to 16 : 6,000hours Capacitance change 25% of the initial value (6.3, 10Vdc :30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value (6.3, 10Vdc :30%) D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Endurance Shelf Life d Sleeve (PET : Brown) F0.5 Code : E D' Terminal F0.5 DIMENSIONS [mm] L' Vent (Except5 &6.3) 15min 4min (5 to 10) (12.5 to 16) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZH AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 155 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZHSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 6.3 10 16 220 470 820 1,200 1,200 1,500 1,800 2,200 2,700 3,900 4,700 5,600 6,800 6,800 8,200 150 330 680 1,000 1,000 1,500 1,500 1,800 2,200 3,300 3,900 4,700 4,700 5,600 6,800 100 220 470 680 680 1,000 1,000 1,500 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 12.5x35 16x20 16x25 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.012 0.015 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.031 0.038 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,570 3,250 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKZH6R3E221ME11D EKZH6R3E471MF11D EKZH6R3E821MHB5D EKZH6R3E122MH15D EKZH6R3E122MJC5S EKZH6R3E152MH20D EKZH6R3E182MJ16S EKZH6R3E222MJ20S EKZH6R3E272MJ25S EKZH6R3E392MK20S EKZH6R3E472MK25S EKZH6R3E562MK30S EKZH6R3E682MK35S EKZH6R3E682ML20S EKZH6R3E822ML25S EKZH100E151ME11D EKZH100E331MF11D EKZH100E681MHB5D EKZH100E102MH15D EKZH100E102MJC5S EKZH100E152MH20D EKZH100E152MJ16S EKZH100E182MJ20S EKZH100E222MJ25S EKZH100E332MK20S EKZH100E392MK25S EKZH100E472MK30S EKZH100E472ML20S EKZH100E562MK35S EKZH100E682ML25S EKZH160E101ME11D EKZH160E221MF11D EKZH160E471MHB5D EKZH160E681MH15D EKZH160E681MJC5S EKZH160E102MH20D EKZH160E102MJ16S EKZH160E152MJ20S 16 25 35 1,800 2,200 2,700 3,300 3,300 3,900 4,700 68 150 330 390 470 560 680 820 1,000 1,500 1,800 2,200 2,200 2,700 3,300 47 100 220 270 330 390 470 560 680 1,000 1,200 1,500 1,500 1,800 2,200 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 Part No. EKZH160E182MJ25S EKZH160E222MK20S EKZH160E272MK25S EKZH160E332MK30S EKZH160E332ML20S EKZH160E392MK35S EKZH160E472ML25S EKZH250E680ME11D EKZH250E151MF11D EKZH250E331MHB5D EKZH250E391MH15D EKZH250E471MJC5S EKZH250E561MH20D EKZH250E681MJ16S EKZH250E821MJ20S EKZH250E102MJ25S EKZH250E152MK20S EKZH250E182MK25S EKZH250E222MK30S EKZH250E222ML20S EKZH250E272MK35S EKZH250E332ML25S EKZH350E470ME11D EKZH350E101MF11D EKZH350E221MHB5D EKZH350E271MH15D EKZH350E331MJC5S EKZH350E391MH20D EKZH350E471MJ16S EKZH350E561MJ20S EKZH350E681MJ25S EKZH350E102MK20S EKZH350E122MK25S EKZH350E152MK30S EKZH350E152ML20S EKZH350E182MK35S EKZH350E222ML25S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 0.47 220 680 2,200 4,700 to to to to to 150 560 1,800 3,900 8,200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 156 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZE Low impedance, 105 KZH P155 Series Lower Z KZE Newly innovative electrolyte is employed to minimize impedance Endurance with ripple current: 1,000 to 5,000 hours at 105 Non solvent resistant type RoHS Compliant Lower Z KY P166 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. Z (-25) / Z (+20) 2max. Z (-40) / Z (+20) 3max. Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 7L : 1,000hours 5 &6.3 : 2,000hours 8 : 3,000hours 10 : 4,000hours 12.5 to18 : 5,000hours Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] F0.5 D' d F0.5 Code : E Sleeve (PET : Brown) F0.5 Terminal L' Vent (Except 7L &5 &6.3) 15min 4min (7L) (5 to 10,Except 7L) (12.5 to 18) Gas escape end seal 16, 18 8 6.3 10, 12.5 5 0.45 0.45 0.45 7L 0.6 0.8 11L 0.5 0.5 0.6 2.0 2.5 3.5 5.0 7.5 F D+0.5max. D' L+1.5max.(7L : L+1.0max.) L' D d PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZ E AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8F:6R8, 10F:100, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 157 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZESeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 6.3 10 16 25 68 150 150 220 330 560 820 1,000 1,200 1,200 1,500 2,200 3,300 3,900 4,700 5,600 5,600 6,800 56 100 120 180 220 470 680 680 1,000 1,000 1,200 1,500 2,200 3,300 3,900 3,900 4,700 5,600 33 56 68 120 120 330 470 470 680 680 1,000 1,200 1,500 2,200 2,700 2,700 3,300 3,900 27 47 56 100 100 220 330 330 470 470 680 5x7 5x11 6.3x7 8x7 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 12.5x35 16x20 16x25 5x7 5x11 6.3x7 8x7 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x7 5x11 6.3x7 6.3x11 8x7 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x7 5x11 6.3x7 6.3x11 8x7 8x11.5 8x15 10x12.5 8x20 10x16 10x20 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.43 0.30 0.23 0.15 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.015 0.018 0.016 0.44 0.30 0.23 0.15 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.45 0.30 0.24 0.13 0.15 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.46 0.30 0.24 0.13 0.15 0.072 0.056 0.053 0.041 0.038 0.023 1.3 1.0 0.69 0.45 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.039 0.045 0.043 1.4 1.0 0.69 0.45 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.4 1.0 0.72 0.41 0.45 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.4 1.0 0.72 0.41 0.45 0.22 0.17 0.16 0.13 0.12 0.069 210 250 300 380 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,400 3,140 3,460 210 250 300 380 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 210 250 300 405 380 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 210 250 300 405 380 760 995 1,030 1,250 1,430 1,820 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKZE6R3E680ME07D EKZE6R3E151ME11D EKZE6R3E151MF07D EKZE6R3E221MH07D EKZE6R3E331MF11D EKZE6R3E561MHB5D EKZE6R3E821MH15D EKZE6R3E102MJC5S EKZE6R3E122MH20D EKZE6R3E122MJ16S EKZE6R3E152MJ20S EKZE6R3E222MJ25S EKZE6R3E332MK20S EKZE6R3E392MK25S EKZE6R3E472MK30S EKZE6R3E562MK35S EKZE6R3E562ML20S EKZE6R3E682ML25S EKZE100E560ME07D EKZE100E101ME11D EKZE100E121MF07D EKZE100E181MH07D EKZE100E221MF11D EKZE100E471MHB5D EKZE100E681MH15D EKZE100E681MJC5S EKZE100E102MH20D EKZE100E102MJ16S EKZE100E122MJ20S EKZE100E152MJ25S EKZE100E222MK20S EKZE100E332MK25S EKZE100E392MK30S EKZE100E392ML20S EKZE100E472MK35S EKZE100E562ML25S EKZE160E330ME07D EKZE160E560ME11D EKZE160E680MF07D EKZE160E121MF11D EKZE160E121MH07D EKZE160E331MHB5D EKZE160E471MH15D EKZE160E471MJC5S EKZE160E681MH20D EKZE160E681MJ16S EKZE160E102MJ20S EKZE160E122MJ25S EKZE160E152MK20S EKZE160E222MK25S EKZE160E272MK30S EKZE160E272ML20S EKZE160E332MK35S EKZE160E392ML25S EKZE250E270ME07D EKZE250E470ME11D EKZE250E560MF07D EKZE250E101MF11D EKZE250E101MH07D EKZE250E221MHB5D EKZE250E331MH15D EKZE250E331MJC5S EKZE250E471MH20D EKZE250E471MJ16S EKZE250E681MJ20S 25 35 50 63 820 1,000 1,500 1,800 1,800 2,200 2,700 18 33 39 56 56 150 220 220 270 330 470 560 680 1,000 1,200 1,200 1,500 1,800 10 22 22 33 56 100 120 150 180 220 270 330 470 560 680 820 820 1,000 15 33 56 82 82 120 120 180 180 220 270 390 470 470 560 680 680 680 820 820 1,000 1,200 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x7 5x11 6.3x7 6.3x11 8x7 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 5x7 5x11 6.3x7 8x7 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x30 12.5x35 16x20 16x25 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x31.5 18x25 16x35.5 16x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.47 0.30 0.25 0.13 0.16 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.50 0.34 0.26 0.17 0.14 0.074 0.061 0.061 0.046 0.042 0.030 0.028 0.027 0.023 0.021 0.019 0.023 0.021 0.88 0.35 0.22 0.16 0.11 0.12 0.076 0.056 0.072 0.046 0.041 0.031 0.028 0.032 0.024 0.021 0.025 0.030 0.021 0.024 0.019 0.018 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.5 1.0 0.75 0.41 0.48 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.5 1.18 0.78 0.51 0.50 0.22 0.18 0.18 0.14 0.12 0.090 0.085 0.068 0.059 0.052 0.051 0.059 0.056 3.5 1.4 0.88 0.64 0.44 0.48 0.31 0.23 0.29 0.19 0.13 0.093 0.084 0.096 0.072 0.063 0.075 0.090 0.063 0.072 0.057 0.054 2,150 2,360 2,770 3,290 3,140 3,400 3,460 210 250 300 405 380 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 210 238 300 380 385 724 950 979 1,190 1,370 1,580 1,870 2,050 2,410 2,860 2,960 2,730 3,010 165 265 500 665 690 820 950 1,150 1,150 1,350 1,500 1,900 2,300 2,000 2,500 2,800 2,600 2,500 2,850 2,800 2,900 3,400 Part No. EKZE250E821MJ25S EKZE250E102MK20S EKZE250E152MK25S EKZE250E182MK30S EKZE250E182ML20S EKZE250E222MK35S EKZE250E272ML25S EKZE350E180ME07D EKZE350E330ME11D EKZE350E390MF07D EKZE350E560MF11D EKZE350E560MH07D EKZE350E151MHB5D EKZE350E221MH15D EKZE350E221MJC5S EKZE350E271MH20D EKZE350E331MJ16S EKZE350E471MJ20S EKZE350E561MJ25S EKZE350E681MK20S EKZE350E102MK25S EKZE350E122MK30S EKZE350E122ML20S EKZE350E152MK35S EKZE350E182ML25S EKZE500E100ME07D EKZE500E220ME11D EKZE500E220MF07D EKZE500E330MH07D EKZE500E560MF11D EKZE500E101MHB5D EKZE500E121MH15D EKZE500E151MJC5S EKZE500E181MH20D EKZE500E221MJ16S EKZE500E271MJ20S EKZE500E331MJ25S EKZE500E471MK20S EKZE500E561MK25S EKZE500E681MK30S EKZE500E821MK35S EKZE500E821ML20S EKZE500E102ML25S EKZE630E150ME11D EKZE630E330MF11D EKZE630E560MHB5D EKZE630E820MH15D EKZE630E820MJC5S EKZE630E121MH20D EKZE630E121MJ16S EKZE630E181MJ20S EKZE630E181MK16S EKZE630E221MJ25S EKZE630E271MK20S EKZE630E391MK25S EKZE630E471MK30S EKZE630E471ML20S EKZE630E561MK35S EKZE630E681MK40S EKZE630E681ML25S EKZE630E681MM20S EKZE630E821MLN3S EKZE630E821MM25S EKZE630E102MLP1S EKZE630E122ML40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 158 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KZESeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 63 80 1,200 1,500 1,800 68 100 120 150 150 220 330 330 390 470 470 470 560 680 680 820 820 1,000 1,000 1,200 18x31.5 18x35.5 18x40 10x12.5 10x16 10x20 10x25 12.5x16 12.5x20 12.5x25 16x20 12.5x30 12.5x35 16x25 18x20 12.5x40 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.020 0.018 0.017 0.17 0.11 0.084 0.069 0.11 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 0.060 0.054 0.051 0.66 0.47 0.34 0.28 0.34 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 3,300 3,400 3,500 480 600 800 900 750 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKZE630E122MMN3S EKZE630E152MMP1S EKZE630E182MM40S EKZE800E680MJC5S EKZE800E101MJ16S EKZE800E121MJ20S EKZE800E151MJ25S EKZE800E151MK16S EKZE800E221MK20S EKZE800E331MK25S EKZE800E331ML20S EKZE800E391MK30S EKZE800E471MK35S EKZE800E471ML25S EKZE800E471MM20S EKZE800E561MK40S EKZE800E681MLN3S EKZE800E681MM25S EKZE800E821MLP1S EKZE800E821MMN3S EKZE800E102ML40S EKZE800E102MMP1S EKZE800E122MM40S : Enter the appropriate lead forming or taping code. 6.8 15 27 39 47 56 68 82 100 120 150 220 100 220 270 330 330 330 390 470 470 560 560 680 680 820 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 16x20 12.5x30 12.5x35 16x25 18x20 12.5x40 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 1.4 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.11 0.069 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 5.6 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.34 0.28 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 125 205 355 450 480 565 600 800 750 900 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 Part No. EKZE101E6R8ME11D EKZE101E150MF11D EKZE101E270MHB5D EKZE101E390MH15D EKZE101E470MJC5S EKZE101E560MH20D EKZE101E680MJ16S EKZE101E820MJ20S EKZE101E101MK16S EKZE101E121MJ25S EKZE101E151MK20S EKZE101E221MK25S EKZE101E221ML20S EKZE101E271MK30S EKZE101E331MK35S EKZE101E331ML25S EKZE101E331MM20S EKZE101E391MK40S EKZE101E471MLN3S EKZE101E471MM25S EKZE101E561MLP1S EKZE101E561MMN3S EKZE101E681ML40S EKZE101E681MMP1S EKZE101E821MM40S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers 7L Capacitance(F) Frequency(Hz) 10 to 33 39 to 220 120 0.42 0.50 11L to 40L 1k 0.70 0.73 10k 0.90 0.92 100k 1.00 1.00 Frequency(Hz) Capacitance(F) 6.8 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 159 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KYB Low impedance, 105 Series KYB Low impedance, high ripple and long life from KYA series Newly innovative electrolyte is employed to minimize impedance Endurance with ripple current : 4,000 to 10,000 hours at 105 Non solvent resistant type RoHS Compliant Lower Z KYA P163 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 2 Z(-40)/Z(+20) 8 6 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Rated Voltage(Vdc) 6.3 to 10Vdc 16 to 100Vdc Time 5: 4,000hours 6.3 & 8: 6,000hours 10 to 18: 8,000hours 5: 5,000hours 6.3 & 8: 7,000hours 10 to 18: 10,000hours Capacitance change 30% of the initial value 25% of the initial value D.F. (tan) 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] d Sleeve (PET : Brown) F0.5 Code : E F0.5 Terminal D d D' F D' L' Vent (Except5 &6.3) 15min. 4min. (5 to 10) (12.5 to 18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 E KYB 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8F:6R8, 39F:390, 470F:471) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 160 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYBSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 180 390 820 1,200 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 6.3 6,800 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 15,000 18,000 18,000 22,000 120 330 560 820 1,000 1,000 1,200 1,800 2,200 2,700 2,700 3,900 10 4,700 4,700 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 120 270 470 680 680 820 1,000 16 1,500 1,800 2,200 2,200 3,300 3,900 3,900 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.060 0.064 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.017 0.020 0.021 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.24 0.26 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.068 0.080 0.084 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,210 1,050 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,640 3,140 3,000 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKYB6R3E181ME11D EKYB6R3E391MF11D EKYB6R3E821MHB5D EKYB6R3E122MH15D EKYB6R3E122MJC5S EKYB6R3E152MH20D EKYB6R3E182MJ16S EKYB6R3E222MJ20S EKYB6R3E272MJ25S EKYB6R3E332MJ30S EKYB6R3E392MK20S EKYB6R3E472MK25S EKYB6R3E682MK30S EKYB6R3E682ML20S EKYB6R3E822MK35S EKYB6R3E822MM20S EKYB6R3E103MK40S EKYB6R3E103ML25S EKYB6R3E123MLN3S EKYB6R3E123MM25S EKYB6R3E153MLP1S EKYB6R3E153MMN3S EKYB6R3E183ML40S EKYB6R3E183MMP1S EKYB6R3E223MM40S EKYB100E121ME11D EKYB100E331MF11D EKYB100E561MHB5D EKYB100E821MH15D EKYB100E102MH20D EKYB100E102MJC5S EKYB100E122MJ16S EKYB100E182MJ20S EKYB100E222MJ25S EKYB100E272MJ30S EKYB100E272MK20S EKYB100E392MK25S EKYB100E472MK30S EKYB100E472ML20S EKYB100E562MK35S EKYB100E682MK40S EKYB100E682ML25S EKYB100E682MM20S EKYB100E822MLN3S EKYB100E822MM25S EKYB100E103MLP1S EKYB100E103MMN3S EKYB100E123ML40S EKYB100E123MMP1S EKYB100E153MM40S EKYB160E121ME11D EKYB160E271MF11D EKYB160E471MHB5D EKYB160E681MH15D EKYB160E681MJC5S EKYB160E821MH20D EKYB160E102MJ16S EKYB160E152MJ20S EKYB160E182MJ25S EKYB160E222MJ30S EKYB160E222MK20S EKYB160E332MK25S EKYB160E392MK30S EKYB160E392ML20S 16 25 35 50 4,700 4,700 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 82 150 330 390 470 560 680 1,000 1,200 1,500 1,500 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 6,800 8,200 47 100 180 270 330 330 470 680 820 1,000 1,000 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 4,700 5,600 27 56 100 150 150 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 5x11 6.3x11 8x11.5 8x15 10x12.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.013 0.014 0.012 0.29 0.15 0.087 0.069 0.060 0.064 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.013 0.014 0.012 0.48 0.20 0.12 0.093 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.052 0.056 0.048 1.2 0.60 0.35 0.28 0.24 0.26 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.052 0.056 0.048 2.0 0.80 0.48 0.38 0.40 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 340 540 840 1,050 1,210 1,050 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 238 385 620 810 810 Part No. EKYB160E472MK35S EKYB160E472MM20S EKYB160E562MK40S EKYB160E562ML25S EKYB160E682MLN3S EKYB160E682MM25S EKYB160E822MLP1S EKYB160E822MMN3S EKYB160E103ML40S EKYB160E103MMP1S EKYB160E123MM40S EKYB250E820ME11D EKYB250E151MF11D EKYB250E331MHB5D EKYB250E391MH15D EKYB250E471MJC5S EKYB250E561MH20D EKYB250E681MJ16S EKYB250E102MJ20S EKYB250E122MJ25S EKYB250E152MJ30S EKYB250E152MK20S EKYB250E222MK25S EKYB250E272MK30S EKYB250E272ML20S EKYB250E332MK35S EKYB250E332MM20S EKYB250E392MK40S EKYB250E392ML25S EKYB250E472MLN3S EKYB250E472MM25S EKYB250E562MLP1S EKYB250E682ML40S EKYB250E682MMN3S EKYB250E822MMP1S EKYB350E470ME11D EKYB350E101MF11D EKYB350E181MHB5D EKYB350E271MH15D EKYB350E331MH20D EKYB350E331MJC5S EKYB350E471MJ16S EKYB350E681MJ20S EKYB350E821MJ25S EKYB350E102MJ30S EKYB350E102MK20S EKYB350E152MK25S EKYB350E182MK30S EKYB350E182ML20S EKYB350E222MK35S EKYB350E222MM20S EKYB350E272MK40S EKYB350E272ML25S EKYB350E332MLN3S EKYB350E332MM25S EKYB350E392MLP1S EKYB350E472ML40S EKYB350E472MMN3S EKYB350E562MMP1S EKYB500E270ME11D EKYB500E560MF11D EKYB500E101MHB5D EKYB500E151MH15D EKYB500E151MJC5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 161 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYBSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 50 63 80 180 220 270 390 470 470 680 820 820 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 2,200 2,700 18 33 56 82 120 120 180 220 330 390 390 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 12 22 39 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.075 0.069 0.055 0.043 0.038 0.034 0.030 0.025 0.028 0.021 0.025 0.019 0.024 0.019 0.021 0.016 0.014 0.014 0.013 0.50 0.25 0.16 0.12 0.085 0.11 0.073 0.055 0.045 0.040 0.036 0.030 0.026 0.028 0.022 0.028 0.020 0.025 0.020 0.022 0.018 0.018 0.016 0.017 0.016 0.80 0.43 0.18 0.30 0.28 0.22 0.18 0.16 0.14 0.12 0.10 0.12 0.084 0.10 0.076 0.096 0.076 0.084 0.064 0.056 0.056 0.052 2.0 1.0 0.64 0.48 0.34 0.44 0.30 0.22 0.18 0.16 0.15 0.12 0.11 0.12 0.088 0.12 0.080 0.10 0.080 0.088 0.072 0.072 0.064 0.068 0.064 3.2 1.8 0.72 980 1,100 1,300 1,600 1,820 1,820 2,100 2,450 2,350 2,800 2,600 3,100 2,750 3,150 2,890 3,550 3,900 3,800 4,100 220 350 530 700 880 725 1,050 1,300 1,550 1,780 1,780 2,100 2,415 2,250 2,700 2,500 3,000 2,730 3,000 2,800 3,200 3,300 3,590 3,570 3,670 163 267 462 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKYB500E181MH20D EKYB500E221MJ16S EKYB500E271MJ20S EKYB500E391MJ25S EKYB500E471MJ30S EKYB500E471MK20S EKYB500E681MK25S EKYB500E821MK30S EKYB500E821ML20S EKYB500E102MK35S EKYB500E102MM20S EKYB500E122MK40S EKYB500E122ML25S EKYB500E152MLN3S EKYB500E152MM25S EKYB500E182MLP1S EKYB500E222ML40S EKYB500E222MMN3S EKYB500E272MMP1S EKYB630E180ME11D EKYB630E330MF11D EKYB630E560MHB5D EKYB630E820MH15D EKYB630E121MH20D EKYB630E121MJC5S EKYB630E181MJ16S EKYB630E221MJ20S EKYB630E331MJ25S EKYB630E391MJ30S EKYB630E391MK20S EKYB630E561MK25S EKYB630E681MK30S EKYB630E681ML20S EKYB630E821MK35S EKYB630E821MM20S EKYB630E102MK40S EKYB630E102ML25S EKYB630E122MLN3S EKYB630E122MM25S EKYB630E152MLP1S EKYB630E152MMN3S EKYB630E182ML40S EKYB630E182MMP1S EKYB630E222MM40S EKYB800E120ME11D EKYB800E220MF11D EKYB800E390MHB5D 56 82 82 120 180 220 270 270 390 470 470 80 560 560 680 680 820 820 1,000 1,200 1,200 1,500 6.8 15 27 39 56 56 82 100 120 150 180 220 100 270 270 330 390 390 470 470 560 560 680 680 820 1,000 8x15 8x20 10x12.5 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 5x11 6.3x11 8x11.5 8x15 8x20 10x12.5 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 16x25 12.5x35 18x20 12.5x40 16x31.5 16x35.5 18x25 16x40 18x31.5 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.14 0.11 0.14 0.10 0.075 0.060 0.053 0.048 0.039 0.033 0.036 0.026 0.032 0.024 0.028 0.022 0.027 0.020 0.018 0.020 0.018 0.80 0.43 0.18 0.14 0.11 0.14 0.10 0.075 0.060 0.053 0.048 0.039 0.033 0.036 0.028 0.026 0.032 0.024 0.022 0.020 0.027 0.018 0.020 0.018 0.017 0.56 0.44 0.56 0.40 0.30 0.24 0.22 0.20 0.16 0.14 0.15 0.11 0.13 0.096 0.12 0.088 0.11 0.080 0.072 0.080 0.072 3.2 1.8 0.72 0.56 0.44 0.56 0.40 0.30 0.24 0.22 0.20 0.16 0.14 0.15 0.12 0.11 0.13 0.096 0.088 0.080 0.11 0.072 0.080 0.072 0.068 585 735 624 780 1,040 1,170 1,350 1,430 1,620 1,950 1,750 2,250 2,100 2,450 2,250 2,400 2,270 2,600 2,900 2,550 3,050 163 267 462 585 735 624 780 1,040 1,170 1,350 1,430 1,620 1,950 1,750 2,250 2,250 2,100 2,450 2,400 2,600 2,270 2,900 2,550 3,050 3,510 Part No. EKYB800E560MH15D EKYB800E820MH20D EKYB800E820MJC5S EKYB800E121MJ16S EKYB800E181MJ20S EKYB800E221MJ25S EKYB800E271MJ30S EKYB800E271MK20S EKYB800E391MK25S EKYB800E471MK30S EKYB800E471ML20S EKYB800E561MK35S EKYB800E561MM20S EKYB800E681MK40S EKYB800E681ML25S EKYB800E821MLN3S EKYB800E821MM25S EKYB800E102MLP1S EKYB800E122ML40S EKYB800E122MMN3S EKYB800E152MMP1S EKYB101E6R8ME11D EKYB101E150MF11D EKYB101E270MHB5D EKYB101E390MH15D EKYB101E560MH20D EKYB101E560MJC5S EKYB101E820MJ16S EKYB101E101MJ20S EKYB101E121MJ25S EKYB101E151MJ30S EKYB101E181MK20S EKYB101E221MK25S EKYB101E271MK30S EKYB101E271ML20S EKYB101E331ML25S EKYB101E391MK35S EKYB101E391MM20S EKYB101E471MK40S EKYB101E471MLN3S EKYB101E561MLP1S EKYB101E561MM25S EKYB101E681ML40S EKYB101E681MMN3S EKYB101E821MMP1S EKYB101E102MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 6.8 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 162 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KYA Series Low impedance, 105 KYA Downsized from KY series Newly innovative electrolyte is employed to minimize impedance Endurance with ripple current : 4,000 to 10,000 hours at 105 Non solvent resistant type RoHS Compliant Downsized KY P166 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 8 6 4 3 3 3 3 3 (at 120Hz) Z(-40)/Z(+20) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 6.3 to 10Vdc 5 & 6.3 : 4,000hours 8 & 10 : 6,000hours 12.5 to 16 : 8,000hours 16 to 100Vdc 5 & 6.3 : 5,000hours 8 & 10 : 7,000hours 12.5 to 16 : 10,000hours Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] d Sleeve (PET : Brown) F0.5 Code : E F0.5 Terminal D d D' F D' L' Vent (Except5 &6.3) 15min. 4min. (5 to 10) (12.5 to 16) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 E KYA 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 163 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYASeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 6.3 10 16 25 100 180 220 330 470 820 1,200 1,200 1,500 1,800 2,700 3,300 3,900 4,700 5,600 10,000 12,000 15,000 100 120 330 560 820 820 1,000 1,200 1,200 1,800 2,200 3,300 3,900 6,800 10,000 12,000 47 100 220 270 470 680 680 820 1,000 1,500 1,800 2,200 3,300 4,700 5,600 6,800 8,200 10,000 33 47 68 150 330 390 470 560 680 1,000 1,200 1,500 2,200 5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 10x12.5 8x15 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x25 16x25 16x31.5 16x35.5 5x11 5x11 6.3x11 8x11.5 8x15 10x12.5 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 16x25 16x31.5 16x35.5 5x11 5x11 6.3x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 16x25 16x25 16x31.5 16x31.5 16x35.5 5x11 5x11 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.90 0.40 0.40 0.22 0.22 0.13 0.080 0.087 0.069 0.060 0.046 0.042 0.035 0.027 0.027 0.021 0.017 0.015 0.90 0.40 0.22 0.13 0.087 0.080 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.017 0.015 0.40 0.40 0.22 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.021 0.017 0.017 0.015 0.40 0.40 0.40 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 3.6 1.6 1.6 0.87 0.87 0.52 0.32 0.35 0.27 0.24 0.18 0.17 0.12 0.089 0.089 0.060 0.050 0.044 3.6 1.6 0.87 0.52 0.35 0.32 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.050 0.044 1.6 1.6 0.87 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.060 0.050 0.050 0.044 1.6 1.6 1.6 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 150 250 250 400 400 640 865 840 1,050 1,300 1,400 1,650 1,900 2,230 2,230 2,930 3,450 3,610 150 250 400 640 840 865 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 3,450 3,610 250 250 400 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 2,930 3,450 3,450 3,610 250 250 250 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 Part No. WV (Vdc) Cap (F) Case size DxL(mm) 20 EKYA6R3E101ME11D EKYA6R3E181ME11D 25 EKYA6R3E221ME11D EKYA6R3E331MF11D EKYA6R3E471MF11D EKYA6R3E821MHB5D EKYA6R3E122MJC5S EKYA6R3E122MH15D EKYA6R3E152MH20D EKYA6R3E182MJ16S EKYA6R3E272MJ20S EKYA6R3E332MJ25S 35 EKYA6R3E392MK20S EKYA6R3E472MK25S EKYA6R3E562MK25S EKYA6R3E103ML25S EKYA6R3E123MLN3S EKYA6R3E153MLP1S EKYA100E101ME11D EKYA100E121ME11D EKYA100E331MF11D EKYA100E561MHB5D EKYA100E821MH15D EKYA100E821MJC5S EKYA100E102MJC5S EKYA100E122MH20D EKYA100E122MJ16S EKYA100E182MJ20S EKYA100E222MJ25S EKYA100E332MK20S EKYA100E392MK25S EKYA100E682ML25S 50 EKYA100E103MLN3S EKYA100E123MLP1S EKYA160E470ME11D EKYA160E101ME11D EKYA160E221MF11D EKYA160E271MF11D EKYA160E471MHB5D EKYA160E681MH15D EKYA160E681MJC5S EKYA160E821MH20D EKYA160E102MJ16S EKYA160E152MJ20S EKYA160E182MJ25S EKYA160E222MK20S EKYA160E332MK25S EKYA160E472ML25S EKYA160E562ML25S EKYA160E682MLN3S EKYA160E822MLN3S EKYA160E103MLP1S 63 EKYA250E330ME11D EKYA250E470ME11D EKYA250E680ME11D EKYA250E151MF11D EKYA250E331MHB5D EKYA250E391MH15D EKYA250E471MJC5S EKYA250E561MH20D EKYA250E681MJ16S EKYA250E102MJ20S EKYA250E122MJ25S 100 EKYA250E152MK20S EKYA250E222MK25S 3,300 3,900 4,700 5,600 33 47 100 220 270 330 390 470 680 820 1,000 1,500 2,200 2,700 3,300 3,900 1.0 2.2 3.3 4.7 10 22 27 47 56 100 150 180 180 220 330 470 470 560 820 1,000 1,200 1,800 2,200 10 15 33 56 82 100 120 120 220 330 330 390 470 560 1,000 1,200 1,500 1.0 2.2 3.3 4.7 6.8 16x25 16x25 16x31.5 16x35.5 5x11 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 16x25 16x25 16x31.5 16x35.5 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x20 12.5x25 16x25 16x25 16x31.5 16x35.5 5x11 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x20 12.5x25 12.5x25 16x25 16x31.5 16x35.5 5x11 5x11 5x11 5x11 5x11 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.021 0.021 0.017 0.015 0.40 0.40 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.021 0.017 0.015 4.0 2.5 2.2 1.9 1.5 0.70 0.70 0.30 0.30 0.17 0.12 0.12 0.091 0.084 0.060 0.055 0.045 0.045 0.034 0.025 0.025 0.022 0.019 0.88 0.88 0.35 0.22 0.16 0.11 0.12 0.076 0.056 0.046 0.041 0.041 0.031 0.031 0.025 0.021 0.019 4.5 3.0 2.7 2.5 1.4 0.060 0.060 0.050 0.044 1.6 1.6 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.060 0.050 0.044 16 10 8.8 7.6 6.0 2.8 2.8 1.2 1.2 0.68 0.48 0.48 0.36 0.34 0.24 0.22 0.15 0.15 0.11 0.075 0.075 0.066 0.057 3.5 3.5 1.4 0.88 0.64 0.44 0.48 0.31 0.23 0.19 0.13 0.13 0.093 0.093 0.075 0.063 0.057 15 13 11 10 5.6 2,930 2,930 3,450 3,610 250 250 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 2,930 3,450 3,610 30 43 53 88 100 180 250 295 295 555 730 760 910 1,050 1,220 1,440 1,660 1,660 1,950 2,555 2,555 3,010 3,150 173 173 278 500 665 725 820 950 1,200 1,350 1,570 1,570 1,990 1,990 2,730 2,850 2,900 20 30 40 65 125 Part No. EKYA250E332ML25S EKYA250E392ML25S EKYA250E472MLN3S EKYA250E562MLP1S EKYA350E330ME11D EKYA350E470ME11D EKYA350E101MF11D EKYA350E221MHB5D EKYA350E271MH15D EKYA350E331MJC5S EKYA350E391MH20D EKYA350E471MJ16S EKYA350E681MJ20S EKYA350E821MJ25S EKYA350E102MK20S EKYA350E152MK25S EKYA350E222ML25S EKYA350E272ML25S EKYA350E332MLN3S EKYA350E392MLP1S EKYA500E1R0ME11D EKYA500E2R2ME11D EKYA500E3R3ME11D EKYA500E4R7ME11D EKYA500E100ME11D EKYA500E220ME11D EKYA500E270ME11D EKYA500E470MF11D EKYA500E560MF11D EKYA500E101MHB5D EKYA500E151MH15D EKYA500E181MJC5S EKYA500E181MH20D EKYA500E221MJ16S EKYA500E331MJ20S EKYA500E471MJ25S EKYA500E471MK20S EKYA500E561MK20S EKYA500E821MK25S EKYA500E102ML25S EKYA500E122ML25S EKYA500E182MLN3S EKYA500E222MLP1S EKYA630E100ME11D EKYA630E150ME11D EKYA630E330MF11D EKYA630E560MHB5D EKYA630E820MH15D EKYA630E101MJC5S EKYA630E121MH20D EKYA630E121MJ16S EKYA630E221MJ20S EKYA630E331MJ25S EKYA630E331MK20S EKYA630E391MK20S EKYA630E471MK25S EKYA630E561MK25S EKYA630E102ML25S EKYA630E122MLN3S EKYA630E152MLP1S EKYA101E1R0ME11D EKYA101E2R2ME11D EKYA101E3R3ME11D EKYA101E4R7ME11D EKYA101E6R8ME11D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 164 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYASeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 100 10 6.3x11 15 6.3x11 27 8x11.5 39 8x15 47 10x12.5 56 8x20 68 10x16 100 10x20 150 10x25 180 12.5x20 220 12.5x25 330 16x25 470 16x31.5 560 16x35.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.57 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.069 0.062 0.047 0.038 0.032 0.029 2.3 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.28 0.18 0.14 0.12 0.095 0.086 205 205 355 450 480 565 600 800 900 1,100 1,250 1,700 1,850 2,000 Part No. EKYA101E100MF11D EKYA101E150MF11D EKYA101E270MHB5D EKYA101E390MH15D EKYA101E470MJC5S EKYA101E560MH20D EKYA101E680MJ16S EKYA101E101MJ20S EKYA101E151MJ25S EKYA101E181MK20S EKYA101E221MK25S EKYA101E331ML25S EKYA101E471MLN3S EKYA101E561MLP1S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 1.0 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 165 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KY Low impedance, 105 KZH P155 Series Lower Z KZE P157 Newly innovative electrolyte is employed to minimize ESR Endurance with ripple current : 4,000 to 10,000 hours at 105 Non solvent resistant type RoHS Compliant Lower Z KY SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 3 2 2 2 2 2 2 2 Z(-40)/Z(+20) 8 6 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. 6.3 to 10Vdc 5 & 6.3 : 4,000hours 8 & 10 : 6,000hours 12.5 to 18 : 8,000hours Time 16 to 100Vdc 5 & 6.3 : 5,000hours 8 & 10 : 7,000hours 12.5 to 18 : 10,000hours Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] d Sleeve (PET : Brown) F0.5 Code : E F0.5 Terminal D d D' F D' L' Vent (Except5 &6.3) 15min. 4min. (5 to 10) (12.5 to 18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 E KY- 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0F:1R0,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 166 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 150 330 680 820 1,000 1,200 1,200 1,500 1,800 2,200 2,700 2,700 3,300 3,900 6.3 3,900 4,700 5,600 5,600 6,800 6,800 6,800 8,200 10,000 10,000 12,000 12,000 15,000 18,000 100 220 470 680 680 1,000 1,000 1,200 1,500 1,500 2,200 2,200 2,200 2,700 10 3,300 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 56 120 330 470 470 16 680 680 1,000 1,000 1,200 1,500 5x11 6.3x11 8x11.5 10x12.5 8x15 8x20 10x16 10x20 12.5x15 10x25 10x30 16x15 12.5x20 12.5x25 18x15 12.5x30 12.5x35 16x20 12.5x40 16x25 18x20 16x31.5 16x35.5 18x25 16x40 18x31.5 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x15 10x30 12.5x20 16x15 18x15 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x15 10x25 10x30 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.58 0.22 0.13 0.080 0.087 0.069 0.060 0.046 0.049 0.042 0.031 0.042 0.035 0.027 0.043 0.024 0.020 0.027 0.017 0.021 0.026 0.017 0.015 0.019 0.013 0.015 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.049 0.031 0.035 0.042 0.043 0.027 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 2.3 0.87 0.52 0.32 0.35 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.089 0.11 0.078 0.065 0.078 0.056 0.060 0.067 0.050 0.044 0.049 0.038 0.040 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.16 0.12 0.12 0.12 0.11 0.089 0.078 0.078 0.065 0.056 0.060 0.067 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 210 340 640 865 840 1,050 1,210 1,400 1,450 1,650 1,910 1,940 1,900 2,230 2,210 2,650 2,880 2,530 3,350 2,930 2,860 3,450 3,610 3,140 4,080 4,170 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,650 1,450 1,910 1,900 1,940 2,210 2,230 2,650 2,530 2,880 3,350 2,930 2,860 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKY-6R3E151ME11D EKY-6R3E331MF11D EKY-6R3E681MHB5D EKY-6R3E821MJC5S EKY-6R3E102MH15D EKY-6R3E122MH20D EKY-6R3E122MJ16S EKY-6R3E152MJ20S EKY-6R3E182MK15S EKY-6R3E222MJ25S EKY-6R3E272MJ30S EKY-6R3E272ML15S EKY-6R3E332MK20S EKY-6R3E392MK25S EKY-6R3E392MM15S EKY-6R3E472MK30S EKY-6R3E562MK35S EKY-6R3E562ML20S EKY-6R3E682MK40S EKY-6R3E682ML25S EKY-6R3E682MM20S EKY-6R3E822MLN3S EKY-6R3E103MLP1S EKY-6R3E103MM25S EKY-6R3E123ML40S EKY-6R3E123MMN3S EKY-6R3E153MMP1S EKY-6R3E183MM40S EKY-100E101ME11D EKY-100E221MF11D EKY-100E471MHB5D EKY-100E681MH15D EKY-100E681MJC5S EKY-100E102MH20D EKY-100E102MJ16S EKY-100E122MJ20S EKY-100E152MJ25S EKY-100E152MK15S EKY-100E222MJ30S EKY-100E222MK20S EKY-100E222ML15S EKY-100E272MM15S EKY-100E332MK25S EKY-100E392MK30S EKY-100E392ML20S EKY-100E472MK35S EKY-100E562MK40S EKY-100E562ML25S EKY-100E562MM20S EKY-100E682MLN3S EKY-100E682MM25S EKY-100E822MLP1S EKY-100E822MMN3S EKY-100E103ML40S EKY-100E103MMP1S EKY-100E123MM40S EKY-160E560ME11D EKY-160E121MF11D EKY-160E331MHB5D EKY-160E471MH15D EKY-160E471MJC5S EKY-160E681MH20D EKY-160E681MJ16S EKY-160E102MJ20S EKY-160E102MK15S EKY-160E122MJ25S EKY-160E152MJ30S 1,500 1,500 2,200 2,200 2,700 2,700 3,300 3,900 16 3,900 3,900 4,700 4,700 5,600 5,600 6,800 8,200 10,000 47 100 220 330 330 470 470 680 680 820 1,000 1,000 1,000 1,200 25 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 33 56 150 220 220 270 330 470 470 560 680 35 680 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 1,800 2,200 12.5x20 16x15 12.5x25 18x15 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x15 10x25 10x30 12.5x20 16x15 18x15 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x15 10x25 10x30 12.5x20 16x15 12.5x25 18x15 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x31.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.035 0.042 0.027 0.043 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 0.035 0.042 0.043 0.027 0.024 0.027 0.020 0.026 0.017 0.021 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 0.035 0.042 0.027 0.043 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.12 0.12 0.089 0.11 0.078 0.078 0.065 0.056 0.060 0.067 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.11 0.089 0.078 0.078 0.065 0.067 0.056 0.060 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.089 0.11 0.078 0.078 0.065 0.056 0.060 0.067 0.050 1,900 1,940 2,230 2,210 2,650 2,530 2,880 3,350 2,930 2,860 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 1,900 1,940 2,210 2,230 2,650 2,530 2,880 2,860 3,350 2,930 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 1,900 1,940 2,230 2,210 2,650 2,530 2,880 3,350 2,930 2,860 3,450 Part No. EKY-160E152MK20S EKY-160E152ML15S EKY-160E222MK25S EKY-160E222MM15S EKY-160E272MK30S EKY-160E272ML20S EKY-160E332MK35S EKY-160E392MK40S EKY-160E392ML25S EKY-160E392MM20S EKY-160E472MLN3S EKY-160E472MM25S EKY-160E562MLP1S EKY-160E562MMN3S EKY-160E682ML40S EKY-160E822MMP1S EKY-160E103MM40S EKY-250E470ME11D EKY-250E101MF11D EKY-250E221MHB5D EKY-250E331MH15D EKY-250E331MJC5S EKY-250E471MH20D EKY-250E471MJ16S EKY-250E681MJ20S EKY-250E681MK15S EKY-250E821MJ25S EKY-250E102MJ30S EKY-250E102MK20S EKY-250E102ML15S EKY-250E122MM15S EKY-250E152MK25S EKY-250E182MK30S EKY-250E182ML20S EKY-250E222MK35S EKY-250E222MM20S EKY-250E272MK40S EKY-250E272ML25S EKY-250E332MLN3S EKY-250E332MM25S EKY-250E392MLP1S EKY-250E392MMN3S EKY-250E472ML40S EKY-250E472MMP1S EKY-250E562MM40S EKY-350E330ME11D EKY-350E560MF11D EKY-350E151MHB5D EKY-350E221MH15D EKY-350E221MJC5S EKY-350E271MH20D EKY-350E331MJ16S EKY-350E471MJ20S EKY-350E471MK15S EKY-350E561MJ25S EKY-350E681MJ30S EKY-350E681MK20S EKY-350E681ML15S EKY-350E102MK25S EKY-350E102MM15S EKY-350E122MK30S EKY-350E122ML20S EKY-350E152MK35S EKY-350E182MK40S EKY-350E182ML25S EKY-350E182MM20S EKY-350E222MLN3S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 167 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 KYSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 2,200 2,700 2,700 35 3,300 3,300 3,900 1.0 2.2 3.3 4.7 10 22 56 100 120 150 180 220 270 270 330 470 50 470 470 560 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,800 1,800 2,200 2,700 15 33 56 82 82 120 120 180 63 180 220 270 390 470 470 560 680 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x15 10x25 10x30 12.5x20 16x15 12.5x25 18x15 12.5x30 12.5x35 16x20 12.5x40 16x25 18x20 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.019 0.049 0.015 0.044 0.015 0.040 0.013 0.038 0.014 0.038 0.012 0.032 4.0 16.0 2.5 10.0 2.2 8.8 1.9 7.6 1.5 6.0 0.70 2.8 0.30 1.2 0.17 0.68 0.12 0.48 0.12 0.48 0.091 0.36 0.084 0.34 0.060 0.24 0.061 0.20 0.055 0.22 0.043 0.17 0.045 0.15 0.055 0.17 0.034 0.11 0.054 0.15 0.030 0.10 0.025 0.083 0.034 0.10 0.021 0.069 0.025 0.075 0.036 0.097 0.022 0.066 0.026 0.070 0.019 0.057 0.016 0.048 0.021 0.057 0.017 0.046 0.014 0.038 0.88 3.5 0.35 1.4 0.22 0.88 0.16 0.64 0.11 0.44 0.12 0.48 0.076 0.31 0.056 0.23 0.072 0.29 0.046 0.19 0.041 0.13 0.031 0.093 0.028 0.084 0.032 0.096 0.024 0.072 0.021 0.063 3,140 3,610 4,170 4,080 4,220 4,280 30 43 53 88 100 180 295 555 730 760 910 1,050 1,220 1,260 1,440 1,690 1,660 1,690 1,950 1,930 2,310 2,510 2,210 2,920 2,555 2,490 3,010 2,740 3,150 3,710 3,635 3,680 3,800 165 265 500 665 690 820 950 1,150 1,150 1,350 1,500 1,900 2,300 2,000 2,500 2,800 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 EKY-350E222MM25S EKY-350E272MLP1S EKY-350E272MMN3S EKY-350E332ML40S EKY-350E332MMP1S EKY-350E392MM40S EKY-500E1R0ME11D EKY-500E2R2ME11D EKY-500E3R3ME11D EKY-500E4R7ME11D EKY-500E100ME11D EKY-500E220ME11D EKY-500E560MF11D EKY-500E101MHB5D EKY-500E121MH15D EKY-500E151MJC5S EKY-500E181MH20D EKY-500E221MJ16S EKY-500E271MJ20S EKY-500E271MK15S EKY-500E331MJ25S EKY-500E471MJ30S EKY-500E471MK20S EKY-500E471ML15S EKY-500E561MK25S EKY-500E561MM15S EKY-500E681MK30S EKY-500E821MK35S EKY-500E821ML20S EKY-500E102MK40S EKY-500E102ML25S EKY-500E102MM20S EKY-500E122MLN3S EKY-500E122MM25S EKY-500E152MLP1S EKY-500E182ML40S EKY-500E182MMN3S EKY-500E222MMP1S EKY-500E272MM40S EKY-630E150ME11D EKY-630E330MF11D EKY-630E560MHB5D EKY-630E820MH15D EKY-630E820MJC5S EKY-630E121MH20D EKY-630E121MJ16S EKY-630E181MJ20S EKY-630E181MK16S EKY-630E221MJ25S EKY-630E271MK20S EKY-630E391MK25S EKY-630E471MK30S EKY-630E471ML20S EKY-630E561MK35S EKY-630E681MK40S 680 680 820 820 63 1,000 1,200 1,200 1,500 1,800 68 100 120 150 150 220 330 330 390 470 80 470 470 560 680 680 820 820 1,000 1,000 1,200 6.8 15 27 39 47 56 68 82 100 120 150 220 100 220 270 330 330 330 390 470 470 560 560 680 680 820 16x25 18x20 16x31.5 18x25 16x35.5 16x40 18x31.5 18x35.5 18x40 10x12.5 10x16 10x20 10x25 12.5x16 12.5x20 12.5x25 16x20 12.5x30 12.5x35 16x25 18x20 12.5x40 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 5x11 6.3x11 8x11.5 8x15 10x12.5 8x20 10x16 10x20 12.5x16 10x25 12.5x20 12.5x25 16x20 12.5x30 12.5x35 16x25 18x20 12.5x40 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.025 0.030 0.021 0.024 0.019 0.018 0.020 0.018 0.017 0.17 0.11 0.084 0.069 0.11 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 1.4 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.11 0.069 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 0.075 0.090 0.063 0.072 0.057 0.054 0.060 0.054 0.051 0.66 0.47 0.34 0.28 0.34 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 5.6 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.34 0.28 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 2,600 2,500 2,850 2,800 2,900 3,400 3,300 3,400 3,500 480 600 800 900 750 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 125 205 355 450 480 565 600 800 750 900 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 Part No. EKY-630E681ML25S EKY-630E681MM20S EKY-630E821MLN3S EKY-630E821MM25S EKY-630E102MLP1S EKY-630E122ML40S EKY-630E122MMN3S EKY-630E152MMP1S EKY-630E182MM40S EKY-800E680MJC5S EKY-800E101MJ16S EKY-800E121MJ20S EKY-800E151MJ25S EKY-800E151MK16S EKY-800E221MK20S EKY-800E331MK25S EKY-800E331ML20S EKY-800E391MK30S EKY-800E471MK35S EKY-800E471ML25S EKY-800E471MM20S EKY-800E561MK40S EKY-800E681MLN3S EKY-800E681MM25S EKY-800E821MLP1S EKY-800E821MMN3S EKY-800E102ML40S EKY-800E102MMP1S EKY-800E122MM40S EKY-101E6R8ME11D EKY-101E150MF11D EKY-101E270MHB5D EKY-101E390MH15D EKY-101E470MJC5S EKY-101E560MH20D EKY-101E680MJ16S EKY-101E820MJ20S EKY-101E101MK16S EKY-101E121MJ25S EKY-101E151MK20S EKY-101E221MK25S EKY-101E221ML20S EKY-101E271MK30S EKY-101E331MK35S EKY-101E331ML25S EKY-101E331MM20S EKY-101E391MK40S EKY-101E471MLN3S EKY-101E471MM25S EKY-101E561MLP1S EKY-101E561MMN3S EKY-101E681ML40S EKY-101E681MMP1S EKY-101E821MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 1.0 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 168 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LZA Series Low impedance, Downsized, 105 LZA Adoption of innovative electrolyte and new technologies Very low impedance at high frequency Endurance with ripple current: 4,000 to 7,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Lower Z Downsized LXZ P171 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 35Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tan (Max.) 0.22 0.19 0.16 0.14 0.12 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V Z(-55)/Z(+20) 4 3 3 3 3 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 10 : 4,000hours 12.5 : 5,000hours 16 to 18 : 7,000hours Rated voltage 6.3 to 10Vdc(10) 6.3 to 10Vdc(12.5 to 18) 16 to 35Vdc Capacitance change 30% of the initial value 20% of the initial value 20% of the initial value D.F.(tan) 300% of the initial specified value 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 10Vdc(10) 6.3 to 10Vdc(12.5 to 18) 16 to 35Vdc Capacitance change 30% of the initial value 20% of the initial value 20% of the initial value D.F.(tan) 300% of the initial specified value 200% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : E F0.5 d Sleeve (PET : Dark blue) F0.5 Terminal D D' d F D' L' 15min. 4min. (10) (12.5 to 18) L' 10 0.6 5.0 16 12.5 0.8 0.6 7.5 5.0 D+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal Vent PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L ZA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680F:681, 2,200F:222) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 169 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105 LZASeries STANDARD RATINGS WV Cap (Vdc) (F) Rated ripple Impedance Case size current ( max./ (mArms/ DxL(mm) 20, 100kHz) 105, 100kHz) 1,500 1,800 2,700 3,300 4,700 6.3 6,800 6,800 8,200 10,000 12,000 1,000 1,500 2,200 2,700 3,300 10 4,700 4,700 6,800 6,800 8,200 820 1,000 16 1,500 1,800 2,200 10 x12.5 10x 16 10x 20 10x 25 12.5x 20 12.5x 25 16x 20 18x 20 16 x25 18 x25 10 x12.5 10x 16 10x 20 10x 25 12.5x 20 12.5x 25 16x 20 16x 25 18x 20 18x 25 10 x12.5 10x 16 10x 20 10x 25 12.5x 20 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 WV Cap (Vdc) (F) Part No. ELZA6R3E152MJC5S ELZA6R3E182MJ16S ELZA6R3E272MJ20S ELZA6R3E332MJ25S ELZA6R3E472MK20S ELZA6R3E682MK25S ELZA6R3E682ML20S ELZA6R3E822MM20S ELZA6R3E103ML25S ELZA6R3E123MM25S ELZA100E102MJC5S ELZA100E152MJ16S ELZA100E222MJ20S ELZA100E272MJ25S ELZA100E332MK20S ELZA100E472MK25S ELZA100E472ML20S ELZA100E682ML25S ELZA100E682MM20S ELZA100E822MM25S ELZA160E821MJC5S ELZA160E102MJ16S ELZA160E152MJ20S ELZA160E182MJ25S ELZA160E222MK20S 16 25 35 3,300 3,900 5,600 5,600 8,200 470 680 1,000 1,200 1,500 2,200 2,700 3,300 3,900 4,700 330 470 680 820 1,000 1,500 1,800 2,200 2,700 3,300 Rated ripple Impedance Case size current ( max./ (mArms/ DxL(mm) 20, 100kHz) 105, 100kHz) 12.5 x 25 16 x 20 16 x 25 18 x 20 18 x 25 10 x 12.5 10 x 16 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 10 x 12.5 10 x 16 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 Part No. ELZA160E332MK25S ELZA160E392ML20S ELZA160E562ML25S ELZA160E562MM20S ELZA160E822MM25S ELZA250E471MJC5S ELZA250E681MJ16S ELZA250E102MJ20S ELZA250E122MJ25S ELZA250E152MK20S ELZA250E222MK25S ELZA250E272ML20S ELZA250E332MM20S ELZA250E392ML25S ELZA250E472MM25S ELZA350E331MJC5S ELZA350E471MJ16S ELZA350E681MJ20S ELZA350E821MJ25S ELZA350E102MK20S ELZA350E152MK25S ELZA350E182ML20S ELZA350E222MM20S ELZA350E272ML25S ELZA350E332MM25S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 330 680 2,200 4,700 to to to to 470 1,800 3,900 12,000 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 170 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LXZ Low impedance, Downsized, 105 LXZ Series Lower Z Downsized Adoption of innovative electrolyte and new technologies Very low impedance at high frequency Endurance with ripple current: 2,000 to 8,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant LXY P174 Lower Z LXV P176 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 63Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V tan(Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 5 & 6.3 : 2,000hours 8 : 3,000hours 10 : 5,000hours12.5 : 7,000hours 16 & 18 : 8,000hours Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Endurance Shelf Life DIMENSIONS [mm] d F0.5 Code : E Sleeve (PET : Dark blue) F0.5 Terminal D D' d F D' L' 15min. 4min. (5 to 10) (12.5 to 18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal Vent (Except5 & 6.3) PART NUMBERING SYSTEM 1 2 3 4 E LXZ 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150F:151, 2,200F:222) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 171 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105 LXZSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 150 330 470 680 820 1,000 1,200 1,200 1,500 2,200 2,700 3,300 3,900 6.3 4,700 5,600 5,600 6,800 6,800 6,800 8,200 10,000 10,000 12,000 12,000 15,000 18,000 100 220 330 470 680 680 1,000 1,000 1,200 1,500 1,800 2,200 3,300 10 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 47 100 220 330 470 470 560 680 16 1,000 1,200 1,500 1,500 2,200 2,700 2,700 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 12.5x35 16x20 12.5x40 16x25 18x20 16x30 16x35 18x25 16x40 18x30 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.022 0.029 0.017 0.022 0.028 0.019 0.017 0.020 0.015 0.018 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.029 0.022 0.017 0.022 0.028 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.029 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.044 0.058 0.034 0.044 0.056 0.038 0.034 0.040 0.030 0.036 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.058 0.044 0.034 0.044 0.056 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.058 175 290 400 555 760 730 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,510 2,210 2,870 2,560 2,490 3,010 3,150 2,740 3,710 3,330 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,210 2,510 2,870 2,560 2,490 3,010 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,210 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 ELXZ6R3E151MEB5D ELXZ6R3E331MFB5D ELXZ6R3E471MF15D ELXZ6R3E681MH12D ELXZ6R3E821MJC5S ELXZ6R3E102MH15D ELXZ6R3E122MH20D ELXZ6R3E122MJ16S ELXZ6R3E152MJ20S ELXZ6R3E222MJ25S ELXZ6R3E272MJ30S ELXZ6R3E332MK20S ELXZ6R3E392MK25S ELXZ6R3E472MK30S ELXZ6R3E562MK35S ELXZ6R3E562ML20S ELXZ6R3E682MK40S ELXZ6R3E682ML25S ELXZ6R3E682MM20S ELXZ6R3E822ML30S ELXZ6R3E103ML35S ELXZ6R3E103MM25S ELXZ6R3E123ML40S ELXZ6R3E123MM30S ELXZ6R3E153MM35S ELXZ6R3E183MM40S ELXZ100E101MEB5D ELXZ100E221MFB5D ELXZ100E331MF15D ELXZ100E471MH12D ELXZ100E681MH15D ELXZ100E681MJC5S ELXZ100E102MH20D ELXZ100E102MJ16S ELXZ100E122MJ20S ELXZ100E152MJ25S ELXZ100E182MJ30S ELXZ100E222MK20S ELXZ100E332MK25S ELXZ100E392MK30S ELXZ100E392ML20S ELXZ100E472MK35S ELXZ100E562MK40S ELXZ100E562ML25S ELXZ100E562MM20S ELXZ100E682ML30S ELXZ100E682MM25S ELXZ100E822ML35S ELXZ100E822MM30S ELXZ100E103ML40S ELXZ100E103MM35S ELXZ100E123MM40S ELXZ160E470MEB5D ELXZ160E101MFB5D ELXZ160E221MF15D ELXZ160E331MH12D ELXZ160E471MH15D ELXZ160E471MJC5S ELXZ160E561MH20D ELXZ160E681MJ16S ELXZ160E102MJ20S ELXZ160E122MJ25S ELXZ160E152MJ30S ELXZ160E152MK20S ELXZ160E222MK25S ELXZ160E272MK30S ELXZ160E272ML20S 16 25 35 50 3,300 3,900 3,900 3,900 4,700 4,700 5,600 5,600 6,800 8,200 10,000 47 100 150 220 330 330 390 470 680 820 1,000 1,000 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 33 56 100 150 220 220 270 330 470 560 680 680 1,000 1,200 1,200 1,500 1,800 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 22 47 68 100 12.5x35 12.5x40 16x25 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.022 0.017 0.022 0.028 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.029 0.022 0.028 0.017 0.022 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.029 0.022 0.017 0.022 0.028 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.90 0.45 0.31 0.22 0.044 0.034 0.044 0.056 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.058 0.044 0.056 0.034 0.044 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.058 0.044 0.034 0.044 0.056 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.8 0.90 0.62 0.44 2,510 2,870 2,560 2,490 3,010 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,210 2,510 2,490 2,870 2,560 3,010 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,210 2,510 2,870 2,560 2,490 3,010 2,740 3,150 3,330 3,710 3,680 3,800 155 260 360 485 Part No. ELXZ160E332MK35S ELXZ160E392MK40S ELXZ160E392ML25S ELXZ160E392MM20S ELXZ160E472ML30S ELXZ160E472MM25S ELXZ160E562ML35S ELXZ160E562MM30S ELXZ160E682ML40S ELXZ160E822MM35S ELXZ160E103MM40S ELXZ250E470MEB5D ELXZ250E101MFB5D ELXZ250E151MF15D ELXZ250E221MH12D ELXZ250E331MH15D ELXZ250E331MJC5S ELXZ250E391MH20D ELXZ250E471MJ16S ELXZ250E681MJ20S ELXZ250E821MJ25S ELXZ250E102MJ30S ELXZ250E102MK20S ELXZ250E152MK25S ELXZ250E182MK30S ELXZ250E182ML20S ELXZ250E222MK35S ELXZ250E222MM20S ELXZ250E272MK40S ELXZ250E272ML25S ELXZ250E332ML30S ELXZ250E332MM25S ELXZ250E392ML35S ELXZ250E392MM30S ELXZ250E472ML40S ELXZ250E472MM35S ELXZ250E562MM40S ELXZ350E330MEB5D ELXZ350E560MFB5D ELXZ350E101MF15D ELXZ350E151MH12D ELXZ350E221MH15D ELXZ350E221MJC5S ELXZ350E271MH20D ELXZ350E331MJ16S ELXZ350E471MJ20S ELXZ350E561MJ25S ELXZ350E681MJ30S ELXZ350E681MK20S ELXZ350E102MK25S ELXZ350E122MK30S ELXZ350E122ML20S ELXZ350E152MK35S ELXZ350E182MK40S ELXZ350E182ML25S ELXZ350E182MM20S ELXZ350E222ML30S ELXZ350E222MM25S ELXZ350E272ML35S ELXZ350E272MM30S ELXZ350E332ML40S ELXZ350E332MM35S ELXZ350E392MM40S ELXZ500E220MEB5D ELXZ500E470MFB5D ELXZ500E680MF15D ELXZ500E101MH12D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 172 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105 LXZSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 50 63 120 120 180 180 220 330 390 390 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,800 1,800 2,200 2,700 12 22 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 18x20 12.5x40 16x25 16x30 18x25 16x35 16x40 18x30 18x35 18x40 5x11.5 6.3x11.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.16 0.16 0.12 0.13 0.088 0.073 0.054 0.059 0.044 0.039 0.048 0.033 0.042 0.029 0.034 0.028 0.029 0.025 0.021 0.025 0.023 0.020 1.9 1.0 0.32 0.32 0.24 0.26 0.18 0.15 0.11 0.12 0.088 0.078 0.096 0.066 0.084 0.058 0.068 0.056 0.058 0.050 0.042 0.050 0.046 0.040 4.0 2.0 635 620 730 850 1,050 1,250 1,500 1,480 1,840 2,220 1,840 2,290 1,980 2,500 2,240 2,700 2,610 2,800 3,200 3,000 3,100 3,400 145 240 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 ELXZ500E121MH15D ELXZ500E121MJC5S ELXZ500E181MH20D ELXZ500E181MJ16S ELXZ500E221MJ20S ELXZ500E331MJ25S ELXZ500E391MJ30S ELXZ500E391MK20S ELXZ500E561MK25S ELXZ500E681MK30S ELXZ500E681ML20S ELXZ500E821MK35S ELXZ500E821MM20S ELXZ500E102MK40S ELXZ500E102ML25S ELXZ500E122ML30S ELXZ500E122MM25S ELXZ500E152ML35S ELXZ500E182ML40S ELXZ500E182MM30S ELXZ500E222MM35S ELXZ500E272MM40S ELXZ630E120MEB5D ELXZ630E220MFB5D 63 39 68 100 100 120 150 180 220 330 330 390 470 470 680 680 680 820 820 820 1,000 1,200 1,200 1,500 1,800 6.3x15 8x12 8x15 10x12.5 10x16 8x20 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 18x20 12.5x40 16x30 18x25 16x35 16x40 18x30 18x35 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.61 0.34 0.27 0.255 0.19 0.21 0.145 0.13 0.090 0.085 0.070 0.055 0.059 0.047 0.050 0.055 0.042 0.043 0.043 0.036 0.030 0.032 0.030 0.025 1.4 0.75 0.65 0.51 0.38 0.52 0.29 0.26 0.18 0.17 0.14 0.11 0.12 0.094 0.10 0.11 0.084 0.086 0.086 0.072 0.060 0.064 0.060 0.050 330 405 535 540 600 690 890 1,050 1,300 1,290 1,720 2,090 1,770 2,270 2,160 2,290 2,560 2,670 2,590 2,770 2,850 2,950 3,100 3,210 Part No. ELXZ630E390MF15D ELXZ630E680MH12D ELXZ630E101MH15D ELXZ630E101MJC5S ELXZ630E121MJ16S ELXZ630E151MH20D ELXZ630E181MJ20S ELXZ630E221MJ25S ELXZ630E331MJ30S ELXZ630E331MK20S ELXZ630E391MK25S ELXZ630E471MK30S ELXZ630E471ML20S ELXZ630E681MK35S ELXZ630E681ML25S ELXZ630E681MM20S ELXZ630E821MK40S ELXZ630E821ML30S ELXZ630E821MM25S ELXZ630E102ML35S ELXZ630E122ML40S ELXZ630E122MM30S ELXZ630E152MM35S ELXZ630E182MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 12 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 18,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 173 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105 LXY LXZ P171 Series Lower Z Downsized Adoption of innovative electrolyte and new technologies Endurance with ripple current : 2,000 to 8,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant LXY Lower Z LXV P176 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 10 to 63Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V tan (Max.) 0.19 0.16 0.14 0.12 0.10 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. 10 to 50Vdc : 3max. Z(-55)/Z(+20) 63Vdc : 6max. Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 5 & 6.3 : 2,000hours 8 : 3,000hours10 : 5,000hours12.5 : 7,000hours16 & 18 : 8,000hours Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] D' d Sleeve (PET : Dark blue) F0.5 Code : E F0.5 Terminal L' 15min. 4min. (5 to 10) (12.5 to 16) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal Vent (Except5 &6.3) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XY AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120F:121, 2,200F:222) Lead forming*taping code Terminal code Voltage code (ex. 10V:100, 25V:250, 63V:630) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 10 220 680 2,200 4,700 to to to to to 180 560 1,800 3,900 8,200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 174 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105 LXYSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 10 16 25 82 180 220 330 390 470 680 680 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,300 3,900 3,900 5,600 6,800 8,200 56 120 180 270 270 330 470 470 680 820 1,200 1,200 1,500 2,200 2,200 2,700 2,700 3,300 3,900 4,700 5,600 39 82 120 150 180 220 330 330 470 560 820 820 1,000 1,500 1,500 1,800 1,800 2,200 2,700 3,300 3,900 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 12.5x35 16x20 12.5x40 16x25 16x30 16x35 16x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 16x30 16x35 16x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 16x30 16x35 16x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.024 0.038 0.022 0.028 0.025 0.022 0.018 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.048 0.076 0.044 0.056 0.050 0.044 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 2,220 1,630 2,390 2,070 2,350 2,550 2,900 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 ELXY100E820MEB5D ELXY100E181MFB5D ELXY100E221MF15D ELXY100E331MH12D ELXY100E391MJC5S ELXY100E471MH15D ELXY100E681MH20D ELXY100E681MJ16S ELXY100E102MJ20S ELXY100E122MJ25S ELXY100E152MJ30S ELXY100E182MK20S ELXY100E222MK25S ELXY100E272MK30S ELXY100E332MK35S ELXY100E332ML20S ELXY100E392MK40S ELXY100E392ML25S ELXY100E562ML30S ELXY100E682ML35S ELXY100E822ML40S ELXY160E560MEB5D ELXY160E121MFB5D ELXY160E181MF15D ELXY160E271MH12D ELXY160E271MJC5S ELXY160E331MH15D ELXY160E471MH20D ELXY160E471MJ16S ELXY160E681MJ20S ELXY160E821MJ25S ELXY160E122MJ30S ELXY160E122MK20S ELXY160E152MK25S ELXY160E222MK30S ELXY160E222ML20S ELXY160E272MK35S ELXY160E272ML25S ELXY160E332MK40S ELXY160E392ML30S ELXY160E472ML35S ELXY160E562ML40S ELXY250E390MEB5D ELXY250E820MFB5D ELXY250E121MF15D ELXY250E151MH12D ELXY250E181MJC5S ELXY250E221MH15D ELXY250E331MH20D ELXY250E331MJ16S ELXY250E471MJ20S ELXY250E561MJ25S ELXY250E821MJ30S ELXY250E821MK20S ELXY250E102MK25S ELXY250E152MK30S ELXY250E152ML20S ELXY250E182MK35S ELXY250E182ML25S ELXY250E222MK40S ELXY250E272ML30S ELXY250E332ML35S ELXY250E392ML40S 35 50 63 27 56 82 120 120 180 220 220 330 390 560 560 680 1,000 1,000 1,200 1,200 1,500 1,800 2,200 2,700 18 39 56 68 82 82 120 120 180 220 330 330 470 560 680 680 820 820 1,000 1,200 1,500 10 18 33 47 56 68 68 82 120 150 180 220 270 330 390 470 470 560 680 820 1,000 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 16x30 16x35 16x40 5x11.5 6.3x11.5 6.3x15 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 12.5x35 16x20 12.5x40 16x25 16x30 16x35 16x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 10x16 8x20 10x20 10x25 10x30 12.5x20 12.5x25 16x20 12.5x30 12.5x35 16x25 12.5x40 16x30 16x35 16x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 1.2 0.54 0.34 0.30 0.20 0.20 0.14 0.13 0.088 0.073 0.054 0.059 0.044 0.039 0.033 0.050 0.029 0.034 0.030 0.027 0.024 1.9 1.0 0.61 0.47 0.27 0.34 0.21 0.21 0.16 0.13 0.10 0.11 0.074 0.085 0.068 0.063 0.055 0.051 0.046 0.040 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 2.4 1.1 0.68 0.60 0.40 0.40 0.28 0.26 0.18 0.15 0.11 0.12 0.088 0.078 0.066 0.10 0.058 0.068 0.060 0.054 0.048 4.8 2.5 1.6 1.2 0.68 0.85 0.53 0.53 0.40 0.33 0.25 0.28 0.19 0.22 0.17 0.16 0.14 0.13 0.12 0.10 0.090 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 129 219 310 340 470 480 610 755 945 1,150 1,260 1,190 1,490 1,720 1,890 1,420 2,030 1,880 2,150 2,320 2,540 103 161 233 274 418 360 525 500 650 783 960 870 1,150 1,100 1,280 1,390 1,480 1,530 1,720 1,910 2,070 Part No. ELXY350E270MEB5D ELXY350E560MFB5D ELXY350E820MF15D ELXY350E121MH12D ELXY350E121MJC5S ELXY350E181MH15D ELXY350E221MH20D ELXY350E221MJ16S ELXY350E331MJ20S ELXY350E391MJ25S ELXY350E561MJ30S ELXY350E561MK20S ELXY350E681MK25S ELXY350E102MK30S ELXY350E102ML20S ELXY350E122MK35S ELXY350E122ML25S ELXY350E152MK40S ELXY350E182ML30S ELXY350E222ML35S ELXY350E272ML40S ELXY500E180MEB5D ELXY500E390MFB5D ELXY500E560MF15D ELXY500E680MH12D ELXY500E820MH15D ELXY500E820MJC5S ELXY500E121MH20D ELXY500E121MJ16S ELXY500E181MJ20S ELXY500E221MJ25S ELXY500E331MJ30S ELXY500E331MK20S ELXY500E471MK25S ELXY500E561MK30S ELXY500E681MK35S ELXY500E681ML20S ELXY500E821MK40S ELXY500E821ML25S ELXY500E102ML30S ELXY500E122ML35S ELXY500E152ML40S ELXY630E100MEB5D ELXY630E180MFB5D ELXY630E330MF15D ELXY630E470MH12D ELXY630E560MJC5S ELXY630E680MH15D ELXY630E680MJ16S ELXY630E820MH20D ELXY630E121MJ20S ELXY630E151MJ25S ELXY630E181MJ30S ELXY630E221MK20S ELXY630E271MK25S ELXY630E331ML20S ELXY630E391MK30S ELXY630E471MK35S ELXY630E471ML25S ELXY630E561MK40S ELXY630E681ML30S ELXY630E821ML35S ELXY630E102ML40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 175 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LXV Low impedance, 105 LXY P174 Lower Z Series LXV Low impedance Endurance with ripple current : 2,000 to 5,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Lower Z Longer life KMG P142 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Capacitance changeC (-55 /+20) 0.7min. Max. impedance ratio (-55 /+20) 3max.(6.3Vdc: 4max.) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105. Time 5 to 6.3 : 2,000hours 8 &10: 3,000hours 12.5to18: 5,000hours Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics Endurance Shelf Life DIMENSIONS [mm] D' d Sleeve (PET : Brown) F0.5 Code : E F0.5 Terminal L' 15min. 4min. Vent (Except5 & 6.3) (5 to 10) (12.5 to 18) D d F D' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 D+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XV AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120F:121, 1,500F:152) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 176 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 LXVSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 120 220 330 390 470 560 680 820 1,200 1,500 2,200 2,200 2,700 6.3 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 10,000 10,000 12,000 15,000 82 180 270 330 390 470 680 680 1,000 1,200 1,500 1,800 2,200 10 2,700 3,300 3,300 3,900 3,900 3,900 4,700 5,600 6,800 6,800 8,200 8,200 10,000 56 120 180 270 270 330 470 470 16 680 820 1,200 1,200 1,500 2,200 2,200 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 10x16 8x20 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 12.5x40 16x25 18x20 16x30 18x25 16x35 16x40 18x30 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 12.5x35 16x20 12.5x40 16x25 18x20 18x25 16x30 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.72 0.38 0.27 0.20 0.12 0.16 0.084 0.11 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.024 0.028 0.036 0.025 0.027 0.022 0.018 0.024 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.027 0.038 0.024 0.028 0.036 0.027 0.025 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 1.8 0.95 0.68 0.50 0.30 0.40 0.21 0.28 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.060 0.070 0.090 0.063 0.068 0.055 0.045 0.060 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.068 0.095 0.060 0.070 0.090 0.068 0.063 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 165 255 330 415 635 495 825 640 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,460 2,190 1,940 2,510 2,350 2,770 3,110 2,720 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 2,230 1,770 2,460 2,190 1,940 2,350 2,510 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 ELXV6R3E121MEB5D ELXV6R3E221MFB5D ELXV6R3E331MF15D ELXV6R3E391MH12D ELXV6R3E471MJC5S ELXV6R3E561MH15D ELXV6R3E681MJ16S ELXV6R3E821MH20D ELXV6R3E122MJ20S ELXV6R3E152MJ25S ELXV6R3E222MJ30S ELXV6R3E222MK20S ELXV6R3E272MK25S ELXV6R3E392MK30S ELXV6R3E392ML20S ELXV6R3E472MK35S ELXV6R3E562MK40S ELXV6R3E562ML25S ELXV6R3E562MM20S ELXV6R3E682ML30S ELXV6R3E682MM25S ELXV6R3E822ML35S ELXV6R3E103ML40S ELXV6R3E103MM30S ELXV6R3E123MM35S ELXV6R3E153MM40S ELXV100E820MEB5D ELXV100E181MFB5D ELXV100E271MF15D ELXV100E331MH12D ELXV100E391MJC5S ELXV100E471MH15D ELXV100E681MH20D ELXV100E681MJ16S ELXV100E102MJ20S ELXV100E122MJ25S ELXV100E152MJ30S ELXV100E182MK20S ELXV100E222MK25S ELXV100E272MK30S ELXV100E332MK35S ELXV100E332ML20S ELXV100E392MK40S ELXV100E392ML25S ELXV100E392MM20S ELXV100E472MM25S ELXV100E562ML30S ELXV100E682ML35S ELXV100E682MM30S ELXV100E822ML40S ELXV100E822MM35S ELXV100E103MM40S ELXV160E560MEB5D ELXV160E121MFB5D ELXV160E181MF15D ELXV160E271MH12D ELXV160E271MJC5S ELXV160E331MH15D ELXV160E471MH20D ELXV160E471MJ16S ELXV160E681MJ20S ELXV160E821MJ25S ELXV160E122MJ30S ELXV160E122MK20S ELXV160E152MK25S ELXV160E222MK30S ELXV160E222ML20S 16 25 35 50 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 8,200 39 82 120 150 180 220 330 330 470 560 820 820 1,000 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 27 56 82 120 120 180 220 220 330 390 560 560 680 1,000 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 18 39 56 68 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 1.1 0.56 0.41 0.29 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 3.3 1.6 1.2 0.84 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 310 415 Part No. ELXV160E272MK35S ELXV160E272ML25S ELXV160E332MK40S ELXV160E332MM20S ELXV160E392ML30S ELXV160E392MM25S ELXV160E472ML35S ELXV160E472MM30S ELXV160E562ML40S ELXV160E682MM35S ELXV160E822MM40S ELXV250E390MEB5D ELXV250E820MFB5D ELXV250E121MF15D ELXV250E151MH12D ELXV250E181MJC5S ELXV250E221MH15D ELXV250E331MH20D ELXV250E331MJ16S ELXV250E471MJ20S ELXV250E561MJ25S ELXV250E821MJ30S ELXV250E821MK20S ELXV250E102MK25S ELXV250E152MK30S ELXV250E152ML20S ELXV250E182MK35S ELXV250E182ML25S ELXV250E222MK40S ELXV250E222MM20S ELXV250E272ML30S ELXV250E272MM25S ELXV250E332ML35S ELXV250E332MM30S ELXV250E392ML40S ELXV250E392MM35S ELXV250E472MM40S ELXV350E270MEB5D ELXV350E560MFB5D ELXV350E820MF15D ELXV350E121MH12D ELXV350E121MJC5S ELXV350E181MH15D ELXV350E221MH20D ELXV350E221MJ16S ELXV350E331MJ20S ELXV350E391MJ25S ELXV350E561MJ30S ELXV350E561MK20S ELXV350E681MK25S ELXV350E102MK30S ELXV350E102ML20S ELXV350E122MK35S ELXV350E122ML25S ELXV350E152MK40S ELXV350E152MM20S ELXV350E182ML30S ELXV350E182MM25S ELXV350E222ML35S ELXV350E222MM30S ELXV350E272ML40S ELXV350E272MM35S ELXV350E332MM40S ELXV500E180MEB5D ELXV500E390MFB5D ELXV500E560MF15D ELXV500E680MH12D : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 177 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105 LXVSeries STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) 20 82 82 120 120 180 220 330 330 470 560 680 50 680 820 820 820 1,000 1,000 1,200 1,500 1,500 1,800 2,200 12 27 39 47 56 68 68 82 120 150 180 220 270 63 390 390 470 470 560 560 680 680 820 820 1,000 1,000 1,200 8.2 80 18 8x15 10x12.5 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 12.5x35 16x20 12.5x40 16x25 18x20 16x30 18x25 16x35 16x40 18x30 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 10x16 8x20 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 5x11.5 6.3x11.5 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.24 0.16 0.18 0.12 0.088 0.068 0.059 0.059 0.045 0.039 0.033 0.043 0.029 0.033 0.039 0.029 0.030 0.025 0.021 0.026 0.023 0.020 1.9 1.1 0.62 0.49 0.27 0.34 0.21 0.21 0.16 0.13 0.10 0.11 0.074 0.068 0.085 0.063 0.055 0.051 0.085 0.046 0.055 0.040 0.046 0.036 0.040 0.036 1.9 1.1 0.72 0.40 0.52 0.30 0.22 0.17 0.15 0.15 0.11 0.098 0.083 0.11 0.073 0.083 0.098 0.073 0.075 0.063 0.053 0.065 0.058 0.050 4.8 2.8 1.6 1.3 0.68 0.85 0.53 0.53 0.40 0.33 0.25 0.28 0.19 0.17 0.22 0.16 0.14 0.13 0.22 0.12 0.14 0.10 0.12 0.09 0.10 0.09 5.1 3.0 505 530 610 755 945 1,150 1,260 1,190 1,500 1,720 1,900 1,500 2,120 1,880 1,660 2,150 2,020 2,320 2,650 2,340 2,620 2,790 100 160 230 275 420 360 523 500 650 780 960 870 1,150 1,280 1,100 1,390 1,480 1,530 1,170 1,720 1,520 1,910 1,770 2,070 1,970 2,130 100 150 WV (Vdc) Part No. Cap (F) Case size DxL(mm) 20 ELXV500E820MH15D ELXV500E820MJC5S ELXV500E121MH20D ELXV500E121MJ16S ELXV500E181MJ20S ELXV500E221MJ25S ELXV500E331MJ30S ELXV500E331MK20S ELXV500E471MK25S ELXV500E561MK30S ELXV500E681MK35S ELXV500E681ML20S ELXV500E821MK40S ELXV500E821ML25S ELXV500E821MM20S ELXV500E102ML30S ELXV500E102MM25S ELXV500E122ML35S ELXV500E152ML40S ELXV500E152MM30S ELXV500E182MM35S ELXV500E222MM40S ELXV630E120MEB5D ELXV630E270MFB5D ELXV630E390MF15D ELXV630E470MH12D ELXV630E560MJC5S ELXV630E680MH15D ELXV630E680MJ16S ELXV630E820MH20D ELXV630E121MJ20S ELXV630E151MJ25S ELXV630E181MJ30S ELXV630E221MK20S ELXV630E271MK25S ELXV630E391MK30S ELXV630E391ML20S ELXV630E471MK35S ELXV630E471ML25S ELXV630E561MK40S ELXV630E561MM20S ELXV630E681ML30S ELXV630E681MM25S ELXV630E821ML35S ELXV630E821MM30S ELXV630E102ML40S ELXV630E102MM35S ELXV630E122MM40S ELXV800E8R2MEB5D ELXV800E180MFB5D 27 33 39 47 56 56 82 100 150 150 180 270 80 270 330 330 390 390 470 470 560 680 680 820 1,000 5.6 12 18 22 27 33 33 39 56 68 100 100 120 100 180 180 220 220 270 270 330 330 390 390 470 560 680 6.3x15 8x12 10x12.5 8x15 8x20 10x16 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 16x40 18x30 18x35 18x40 5x11.5 6.3x11.5 6.3x15 8x12 10x12.5 8x15 10x16 8x20 10x20 10x25 10x30 12.5x20 12.5x25 12.5x30 16x20 12.5x35 16x25 12.5x40 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 Rated ripple current (mArms/ -10 105, 100kHz) Impedance ( max./100kHz) 0.62 0.53 0.47 0.35 0.27 0.33 0.26 0.19 0.15 0.15 0.11 0.094 0.11 0.087 0.081 0.060 0.085 0.058 0.070 0.052 0.041 0.058 0.052 0.041 1.9 1.1 0.62 0.53 0.47 0.35 0.33 0.27 0.26 0.19 0.15 0.15 0.11 0.094 0.11 0.087 0.081 0.060 0.085 0.058 0.070 0.052 0.058 0.041 0.052 0.041 1.7 1.5 1.3 0.97 0.74 0.90 0.70 0.52 0.41 0.41 0.30 0.26 0.30 0.24 0.22 0.17 0.23 0.16 0.19 0.14 0.11 0.16 0.14 0.11 5.1 3.0 1.7 1.5 1.3 0.97 0.90 0.74 0.70 0.52 0.41 0.41 0.30 0.26 0.30 0.24 0.22 0.17 0.23 0.16 0.19 0.14 0.16 0.11 0.14 0.11 220 275 380 360 490 500 620 795 955 890 1,040 1,270 1,240 1,450 1,440 1,610 1,450 1,790 1,650 2,000 2,200 1,850 1,990 2,370 100 150 220 275 380 360 500 490 620 795 955 890 1,040 1,270 1,240 1,450 1,440 1,610 1,450 1,790 1,650 2,000 1,850 2,200 1,990 2,370 Part No. ELXV800E270MF15D ELXV800E330MH12D ELXV800E390MJC5S ELXV800E470MH15D ELXV800E560MH20D ELXV800E560MJ16S ELXV800E820MJ20S ELXV800E101MJ25S ELXV800E151MJ30S ELXV800E151MK20S ELXV800E181MK25S ELXV800E271MK30S ELXV800E271ML20S ELXV800E331MK35S ELXV800E331ML25S ELXV800E391MK40S ELXV800E391MM20S ELXV800E471ML30S ELXV800E471MM25S ELXV800E561ML35S ELXV800E681ML40S ELXV800E681MM30S ELXV800E821MM35S ELXV800E102MM40S ELXV101E5R6MEB5D ELXV101E120MFB5D ELXV101E180MF15D ELXV101E220MH12D ELXV101E270MJC5S ELXV101E330MH15D ELXV101E330MJ16S ELXV101E390MH20D ELXV101E560MJ20S ELXV101E680MJ25S ELXV101E101MJ30S ELXV101E101MK20S ELXV101E121MK25S ELXV101E181MK30S ELXV101E181ML20S ELXV101E221MK35S ELXV101E221ML25S ELXV101E271MK40S ELXV101E271MM20S ELXV101E331ML30S ELXV101E331MM25S ELXV101E391ML35S ELXV101E391MM30S ELXV101E471ML40S ELXV101E561MM35S ELXV101E681MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Rated voltage Case size (Vdc) 120 1k 10k 100k D (mm) 5 to 8 0.65 0.83 0.95 1.00 5 to 8 10 & 12.5 0.70 0.85 0.96 1.00 35 & 50 10 & 12.5 16 & 18 0.85 0.92 0.97 1.00 16 & 18 5 to 8 0.55 0.76 0.91 1.00 5 to 8 10 & 12.5 0.65 0.83 0.93 1.00 63 to 100 10 & 12.5 16 & 18 0.70 0.87 0.96 1.00 16 & 18 Rated voltage Case size (Vdc) D (mm) 6.3 & 10 16 & 25 Frequency (Hz) 120 1k 10k 100k 0.40 0.66 0.85 1.00 0.50 0.73 0.89 1.00 0.60 0.81 0.94 1.00 0.20 0.55 0.80 1.00 0.35 0.65 0.85 1.00 0.50 0.75 0.90 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 178 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXJ Series 160 to 500Vdc, long life, 105 KXJ Downsized and Longer life from current KXG series Endurance with ripple current : 8,000 to 12,000 hours at 105 Rated voltage range : 160 to 500V, Capacitance range : 6.8 to 680F For electronic ballast circuits and other long life applications Non solvent resistant type RoHS Compliant Downsized KXG P183 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (160 to 450Vdc) -25 to +105 (500Vdc) 160 to 500Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1000 I=0.1CV+40 I=0.03CV+15 CV>1000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 160 to 250V 350 to 500V tan (Max.) 0.20 0.24 (at 20, 120Hz) Rated voltage (Vdc) 160 to 250V 350, 400V 420 to 500V Z(25)/Z(+20) 3 5 6 Z(40)/Z(+20) 6 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied(the peak voltage shall not exceed the rated voltage) for the specified time at 105. Rated voltage (Vdc) 160 to 450V 500V 16L to 20L10,000hours, 25L to 50L12,000hours 108,000hours, 12.5 to 1810.000hours Time Capacitance change 20% of the initial value D.F. (tan) 200 of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve (PET : Brown) F0.5 Terminal D d F D' L' Vent 15min. 4min. (12.5 to 18) (10) L' 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5max. L+1.5max. 18 0.8 7.5 Gas escaped end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KX J AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8F:6R8,10F:100,100F:101) Lead forming*taping code T erminal code Voltage code (ex. 160V:161,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 179 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105 KXJSeries STANDARD RATINGS WV (Vdc) 160 200 Cap (F) Case size tan DxL(mm) 39 56 82 82 100 120 120 150 150 150 180 180 180 180 220 220 220 270 270 270 270 330 330 330 330 390 390 470 470 470 470 470 560 560 680 680 27 47 56 68 82 100 100 100 120 120 120 120 150 150 150 180 180 180 220 220 220 220 270 270 270 270 270 330 330 330 390 390 470 470 470 560 10x16 10x20 10x25 10x30 12.5x20 10x35 14.5x20 10x40 10x45 12.5x25 10x50 12.5x30 14.5x25 16x20 12.5x35 16x25 18x20 12.5x40 12.5x45 14.5x31.5 14.5x35.5 12.5x50 14.5x40 16x31.5 18x25 14.5x45 16x35.5 14.5x50 16x40 16x45 18x31.5 18x35.5 16x50 18x40 18x45 18x50 10x16 10x20 10x25 10x30 12.5x20 10x35 12.5x25 14.5x20 10x40 10x45 12.5x30 16x20 10x50 12.5x35 14.5x25 14.5x31.5 16x25 18x20 12.5x40 12.5x45 14.5x35.5 18x25 12.5x50 14.5x40 14.5x45 16x31.5 16x35.5 14.5x50 16x40 18x31.5 16x45 18x35.5 16x50 18x40 18x45 18x50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/105, 120Hz) 245 315 415 445 575 570 675 665 695 765 785 885 890 855 1,040 1,020 990 1,190 1,230 1,170 1,210 1,400 1,385 1,350 1,290 1,545 1,500 1,735 1,700 1,730 1,660 1,715 1,920 1,905 2,130 2,145 200 290 345 405 520 520 625 615 595 620 725 695 720 860 810 955 925 895 1,075 1,110 1,095 1,050 1,265 1,250 1,290 1,220 1,250 1,450 1,425 1,395 1,575 1,565 1,755 1,745 1,770 1,945 Part No. EKXJ161E390MJ16S EKXJ161E560MJ20S EKXJ161E820MJ25S EKXJ161E820MJ30S EKXJ161E101MK20S EKXJ161E121MJ35S EKXJ161E121MU20S EKXJ161E151MJ40S EKXJ161E151MJ45S EKXJ161E151MK25S EKXJ161E181MJ50S EKXJ161E181MK30S EKXJ161E181MU25S EKXJ161E181ML20S EKXJ161E221MK35S EKXJ161E221ML25S EKXJ161E221MM20S EKXJ161E271MK40S EKXJ161E271MK45S EKXJ161E271MUN3S EKXJ161E271MUP1S EKXJ161E331MK50S EKXJ161E331MU40S EKXJ161E331MLN3S EKXJ161E331MM25S EKXJ161E391MU45S EKXJ161E391MLP1S EKXJ161E471MU50S EKXJ161E471ML40S EKXJ161E471ML45S EKXJ161E471MMN3S EKXJ161E471MMP1S EKXJ161E561ML50S EKXJ161E561MM40S EKXJ161E681MM45S EKXJ161E681MM50S EKXJ201E270MJ16S EKXJ201E470MJ20S EKXJ201E560MJ25S EKXJ201E680MJ30S EKXJ201E820MK20S EKXJ201E101MJ35S EKXJ201E101MK25S EKXJ201E101MU20S EKXJ201E121MJ40S EKXJ201E121MJ45S EKXJ201E121MK30S EKXJ201E121ML20S EKXJ201E151MJ50S EKXJ201E151MK35S EKXJ201E151MU25S EKXJ201E181MUN3S EKXJ201E181ML25S EKXJ201E181MM20S EKXJ201E221MK40S EKXJ201E221MK45S EKXJ201E221MUP1S EKXJ201E221MM25S EKXJ201E271MK50S EKXJ201E271MU40S EKXJ201E271MU45S EKXJ201E271MLN3S EKXJ201E271MLP1S EKXJ201E331MU50S EKXJ201E331ML40S EKXJ201E331MMN3S EKXJ201E391ML45S EKXJ201E391MMP1S EKXJ201E471ML50S EKXJ201E471MM40S EKXJ201E471MM45S EKXJ201E561MM50S WV (Vdc) 220 250 Cap (F) Case size tan DxL(mm) 27 39 56 56 68 82 82 100 100 100 120 120 120 120 150 150 150 180 180 180 220 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 22 33 47 47 56 68 68 82 82 82 100 100 100 100 120 120 120 150 150 150 180 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 10x16 10x20 10x25 10x30 12.5x20 10x35 14.5x20 10x40 10x45 12.5x25 10x50 12.5x30 14.5x25 16x20 12.5x35 16x25 18x20 12.5x40 12.5x45 14.5x31.5 12.5x50 14.5x35.5 14.5x40 16x31.5 18x25 14.5x45 14.5x50 16x35.5 18x31.5 16x40 16x45 18x35.5 16x50 18x40 18x45 18x50 10x16 10x20 10x25 10x30 12.5x20 10x35 14.5x20 10x40 10x45 12.5x25 10x50 12.5x30 14.5x25 16x20 12.5x35 16x25 18x20 12.5x40 12.5x45 14.5x31.5 12.5x50 14.5x35.5 14.5x40 16x31.5 18x25 14.5x45 14.5x50 16x35.5 18x31.5 16x40 16x45 18x35.5 16x50 18x40 18x45 18x50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/105, 120Hz) 200 265 345 370 475 470 555 545 565 625 645 725 725 695 860 845 815 975 1,005 955 1,145 1,095 1,130 1,100 1,050 1,285 1,315 1,245 1,260 1,425 1,450 1,440 1,600 1,590 1,620 1,785 185 240 315 340 430 430 505 495 515 565 585 660 665 635 770 755 730 890 920 870 1,035 990 1,020 995 950 1,160 1,185 1,125 1,135 1,285 1,310 1,300 1,475 1,460 1,485 1,625 Part No. EKXJ221E270MJ16S EKXJ221E390MJ20S EKXJ221E560MJ25S EKXJ221E560MJ30S EKXJ221E680MK20S EKXJ221E820MJ35S EKXJ221E820MU20S EKXJ221E101MJ40S EKXJ221E101MJ45S EKXJ221E101MK25S EKXJ221E121MJ50S EKXJ221E121MK30S EKXJ221E121MU25S EKXJ221E121ML20S EKXJ221E151MK35S EKXJ221E151ML25S EKXJ221E151MM20S EKXJ221E181MK40S EKXJ221E181MK45S EKXJ221E181MUN3S EKXJ221E221MK50S EKXJ221E221MUP1S EKXJ221E221MU40S EKXJ221E221MLN3S EKXJ221E221MM25S EKXJ221E271MU45S EKXJ221E271MU50S EKXJ221E271MLP1S EKXJ221E271MMN3S EKXJ221E331ML40S EKXJ221E331ML45S EKXJ221E331MMP1S EKXJ221E391ML50S EKXJ221E391MM40S EKXJ221E391MM45S EKXJ221E471MM50S EKXJ251E220MJ16S EKXJ251E330MJ20S EKXJ251E470MJ25S EKXJ251E470MJ30S EKXJ251E560MK20S EKXJ251E680MJ35S EKXJ251E680MU20S EKXJ251E820MJ40S EKXJ251E820MJ45S EKXJ251E820MK25S EKXJ251E101MJ50S EKXJ251E101MK30S EKXJ251E101MU25S EKXJ251E101ML20S EKXJ251E121MK35S EKXJ251E121ML25S EKXJ251E121MM20S EKXJ251E151MK40S EKXJ251E151MK45S EKXJ251E151MUN3S EKXJ251E181MK50S EKXJ251E181MUP1S EKXJ251E181MU40S EKXJ251E181MLN3S EKXJ251E181MM25S EKXJ251E221MU45S EKXJ251E221MU50S EKXJ251E221MLP1S EKXJ251E221MMN3S EKXJ251E271ML40S EKXJ251E271ML45S EKXJ251E271MMP1S EKXJ251E331ML50S EKXJ251E331MM40S EKXJ251E331MM45S EKXJ251E391MM50S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 180 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105 KXJSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) Case size tan DxL(mm) 12 22 27 27 33 39 47 47 47 56 56 56 68 68 68 68 82 82 82 100 100 100 100 100 120 120 120 150 150 150 150 180 180 180 220 220 10 18 22 27 27 33 39 39 39 39 47 47 56 56 56 56 68 68 68 82 82 82 82 82 100 100 100 120 120 120 120 120 150 150 180 220 10x16 10x20 10x25 10x30 12.5x20 10x35 10x40 12.5x25 14.5x20 10x45 12.5x30 16x20 10x50 12.5x35 14.5x25 18x20 12.5x40 14.5x31.5 16x25 12.5x45 12.5x50 14.5x35.5 16x31.5 18x25 14.5x40 14.5x45 16x35.5 14.5x50 16x40 16x45 18x31.5 16x50 18x35.5 18x40 18x45 18x50 10x16 10x20 10x25 10x30 12.5x20 10x35 10x40 10x45 12.5x25 14.5x20 12.5x30 16x20 10x50 12.5x35 14.5x25 18x20 12.5x40 14.5x31.5 16x25 12.5x45 12.5x50 14.5x35.5 16x31.5 18x25 14.5x40 14.5x45 16x35.5 14.5x50 16x40 16x45 18x31.5 18x35.5 16x50 18x40 18x45 18x50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current (mArms/105, 120Hz) 135 200 240 255 330 325 375 425 420 425 495 475 485 580 545 550 655 645 625 750 770 740 740 710 835 860 830 980 960 975 940 1,090 1,065 1,080 1,210 1,220 125 180 215 255 300 300 340 355 390 385 455 435 440 525 495 500 600 585 570 680 700 670 670 640 760 785 760 875 860 875 840 870 995 985 1,095 1,220 Part No. EKXJ351E120MJ16S EKXJ351E220MJ20S EKXJ351E270MJ25S EKXJ351E270MJ30S EKXJ351E330MK20S EKXJ351E390MJ35S EKXJ351E470MJ40S EKXJ351E470MK25S EKXJ351E470MU20S EKXJ351E560MJ45S EKXJ351E560MK30S EKXJ351E560ML20S EKXJ351E680MJ50S EKXJ351E680MK35S EKXJ351E680MU25S EKXJ351E680MM20S EKXJ351E820MK40S EKXJ351E820MUN3S EKXJ351E820ML25S EKXJ351E101MK45S EKXJ351E101MK50S EKXJ351E101MUP1S EKXJ351E101MLN3S EKXJ351E101MM25S EKXJ351E121MU40S EKXJ351E121MU45S EKXJ351E121MLP1S EKXJ351E151MU50S EKXJ351E151ML40S EKXJ351E151ML45S EKXJ351E151MMN3S EKXJ351E181ML50S EKXJ351E181MMP1S EKXJ351E181MM40S EKXJ351E221MM45S EKXJ351E221MM50S EKXJ401E100MJ16S EKXJ401E180MJ20S EKXJ401E220MJ25S EKXJ401E270MJ30S EKXJ401E270MK20S EKXJ401E330MJ35S EKXJ401E390MJ40S EKXJ401E390MJ45S EKXJ401E390MK25S EKXJ401E390MU20S EKXJ401E470MK30S EKXJ401E470ML20S EKXJ401E560MJ50S EKXJ401E560MK35S EKXJ401E560MU25S EKXJ401E560MM20S EKXJ401E680MK40S EKXJ401E680MUN3S EKXJ401E680ML25S EKXJ401E820MK45S EKXJ401E820MK50S EKXJ401E820MUP1S EKXJ401E820MLN3S EKXJ401E820MM25S EKXJ401E101MU40S EKXJ401E101MU45S EKXJ401E101MLP1S EKXJ401E121MU50S EKXJ401E121ML40S EKXJ401E121ML45S EKXJ401E121MMN3S EKXJ401E121MMP1S EKXJ401E151ML50S EKXJ401E151MM40S EKXJ401E181MM45S EKXJ401E221MM50S WV (Vdc) 420 450 Cap (F) Case size tan DxL(mm) 6.8 12 15 18 22 27 27 27 27 33 33 33 39 39 47 47 47 56 56 56 68 68 68 68 68 82 82 82 100 100 100 100 120 120 120 150 6.8 12 15 18 18 22 27 27 27 27 33 33 33 39 39 39 47 47 47 56 56 56 56 68 68 68 68 82 82 82 82 100 100 120 120 150 10x16 10x20 10x25 10x30 12.5x20 10x35 10x40 12.5x25 14.5x20 10x45 12.5x30 16x20 10x50 14.5x25 12.5x35 16x25 18x20 12.5x40 12.5x45 14.5x31.5 12.5x50 14.5x35.5 14.5x40 16x31.5 18x25 14.5x45 16x35.5 18x31.5 14.5x50 16x40 16x45 18x35.5 16x50 18x40 18x45 18x50 10x16 10x20 10x25 10x30 12.5x20 10x35 10x40 10x45 12.5x25 14.5x20 12.5x30 14.5x25 16x20 10x50 12.5x35 18x20 12.5x40 14.5x31.5 16x25 12.5x45 14.5x35.5 16x31.5 18x25 12.5x50 14.5x40 14.5x45 16x35.5 14.5x50 16x40 16x45 18x31.5 16x50 18x35.5 18x40 18x45 18x50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current (mArms/105, 120Hz) 105 150 185 215 285 275 290 340 335 335 400 385 375 435 505 500 480 570 590 560 670 640 660 645 615 750 725 730 845 825 840 835 935 930 945 1,060 105 150 185 215 255 250 290 305 340 335 400 400 385 375 460 440 525 515 500 590 580 585 560 670 660 680 660 765 750 760 730 855 835 930 945 1,060 Part No. EKXJ421E6R8MJ16S EKXJ421E120MJ20S EKXJ421E150MJ25S EKXJ421E180MJ30S EKXJ421E220MK20S EKXJ421E270MJ35S EKXJ421E270MJ40S EKXJ421E270MK25S EKXJ421E270MU20S EKXJ421E330MJ45S EKXJ421E330MK30S EKXJ421E330ML20S EKXJ421E390MJ50S EKXJ421E390MU25S EKXJ421E470MK35S EKXJ421E470ML25S EKXJ421E470MM20S EKXJ421E560MK40S EKXJ421E560MK45S EKXJ421E560MUN3S EKXJ421E680MK50S EKXJ421E680MUP1S EKXJ421E680MU40S EKXJ421E680MLN3S EKXJ421E680MM25S EKXJ421E820MU45S EKXJ421E820MLP1S EKXJ421E820MMN3S EKXJ421E101MU50S EKXJ421E101ML40S EKXJ421E101ML45S EKXJ421E101MMP1S EKXJ421E121ML50S EKXJ421E121MM40S EKXJ421E121MM45S EKXJ421E151MM50S EKXJ451E6R8MJ16S EKXJ451E120MJ20S EKXJ451E150MJ25S EKXJ451E180MJ30S EKXJ451E180MK20S EKXJ451E220MJ35S EKXJ451E270MJ40S EKXJ451E270MJ45S EKXJ451E270MK25S EKXJ451E270MU20S EKXJ451E330MK30S EKXJ451E330MU25S EKXJ451E330ML20S EKXJ451E390MJ50S EKXJ451E390MK35S EKXJ451E390MM20S EKXJ451E470MK40S EKXJ451E470MUN3S EKXJ451E470ML25S EKXJ451E560MK45S EKXJ451E560MUP1S EKXJ451E560MLN3S EKXJ451E560MM25S EKXJ451E680MK50S EKXJ451E680MU40S EKXJ451E680MU45S EKXJ451E680MLP1S EKXJ451E820MU50S EKXJ451E820ML40S EKXJ451E820ML45S EKXJ451E820MMN3S EKXJ451E101ML50S EKXJ451E101MMP1S EKXJ451E121MM40S EKXJ451E121MM45S EKXJ451E151MM50S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 181 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105 KXJSeries STANDARD RATINGS WV (Vdc) Cap (F) 500 Case size tan DxL(mm) 6.8 8.2 10 12 15 15 15 18 18 22 22 27 33 39 10x 20 10x 25 10 x30 12.5 x 20 10 x35 10 x 40 12.5 x 25 10 x 45 12.5 x 30 10 x 50 12.5x 35 12.5 x 40 12.5 x 45 12.5x 50 Rated ripple current (mArms/105, 120Hz) 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 90 110 130 135 170 175 165 190 190 230 220 260 285 330 Part No. EKXJ501E6R8MJ20S EKXJ501E8R2MJ25S EKXJ501E100MJ30S EKXJ501E120MK20S EKXJ501E150MJ35S EKXJ501E150MJ40S EKXJ501E150MK25S EKXJ501E180MJ45S EKXJ501E180MK30S EKXJ501E220MJ50S EKXJ501E220MK35S EKXJ501E270MK40S EKXJ501E330MK45S EKXJ501E390MK50S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers (160 to 450Vdc) Capacitance(F) Frequency(Hz) 6.8 to 82 100 to 680 120 1.00 1.00 (500Vdc) 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 Capacitance(F) Frequency(Hz) 6.8 to 22 27 to 39 120 1.00 1.00 1k 1.78 1.75 10k 2.30 2.25 100k 2.59 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 182 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 450Vdc long life, 105 KXG Series KXJ P179 Downsized For electronic ballast circuits and other long life applications Endurance with ripple current : 8,000 to 10,000 hours at 105 Non solvent resistant type RoHS Compliant KXG SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (160 to 400Vdc) -25 to+105 (450Vdc) 160 to 450Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 160 to 250V 350 to 450V tan (Max.) 0.20 0.24 (at 20, 120Hz) Rated voltage (Vdc) 160 to 250V 350 & 400V 450V Z(-25)/Z(+20) 3 5 6 Z(-40)/Z(+20) 6 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours for10) at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' Vent 4min. 15min. (10) (12.5 to 18) D d F D' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5max. L+1.5max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8F:6R8,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 160V:161,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 6.8 to 82 100 to 330 120 1.00 1.00 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 183 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 450Vdc long life, 105 KXGSeries STANDARD RATINGS WV (Vdc) 160 200 250 350 400 450 Cap (F) Case size DxL(mm) tan 10 22 33 47 68 82 100 100 150 220 330 10 22 33 47 68 82 100 150 220 330 10 22 33 47 68 82 100 150 220 6.8 10 22 33 47 68 68 82 100 120 150 6.8 10 15 22 33 47 47 68 82 100 120 150 6.8 10 15 22 33 33 47 68 82 100 10 x 16 10 x 20 10 x 20 10 x 20 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 18 x 31.5 10 x 16 10 x 20 10 x 20 12.5 x 20 12.5 x 20 16 x 20 16 x 20 16 x 25 18 x 25 18 x 35.5 10 x 20 10 x 20 12.5 x 20 12.5 x 20 16 x 20 16 x 20 16 x 25 18 x 25 18 x 31.5 10 x 16 10 x 20 12.5 x 20 16 x 20 16 x 20 16 x 25 18 x 20 18 x 25 18 x 25 18 x 31.5 18 x 35.5 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 20 16 x 25 18 x 20 18 x 25 18 x 25 18 x 31.5 18 x 35.5 18 x 40 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 18 x 20 18 x 25 18 x 31.5 18 x 35.5 18 x 40 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current(mArms/105) 120Hz 100kHz 125 200 250 300 470 510 620 630 770 1,020 1,390 125 200 260 390 470 550 630 840 1,050 1,430 140 200 320 390 520 550 680 860 1,130 110 140 260 360 430 560 550 610 700 830 960 110 140 220 260 360 470 450 585 610 765 865 985 110 180 240 290 390 380 480 630 715 800 315 500 625 750 1,175 1,275 1,395 1,420 1,735 2,295 3,130 315 500 650 975 1,175 1,375 1,420 1,890 2,365 3,220 350 500 800 975 1,300 1,375 1,530 1,935 2,545 275 350 650 900 1,075 1,400 1,375 1,525 1,575 1,865 2,160 275 350 550 650 900 1,175 1,125 1,465 1,525 1,720 1,945 2,215 275 450 600 725 975 950 1,200 1,575 1,785 1,800 Part No. EKXG161E100MJ16S EKXG161E220MJ20S EKXG161E330MJ20S EKXG161E470MJ20S EKXG161E680MK20S EKXG161E820MK20S EKXG161E101MK25S EKXG161E101ML20S EKXG161E151ML20S EKXG161E221ML25S EKXG161E331MMN3S EKXG201E100MJ16S EKXG201E220MJ20S EKXG201E330MJ20S EKXG201E470MK20S EKXG201E680MK20S EKXG201E820ML20S EKXG201E101ML20S EKXG201E151ML25S EKXG201E221MM25S EKXG201E331MMP1S EKXG251E100MJ20S EKXG251E220MJ20S EKXG251E330MK20S EKXG251E470MK20S EKXG251E680ML20S EKXG251E820ML20S EKXG251E101ML25S EKXG251E151MM25S EKXG251E221MMN3S EKXG351E6R8MJ16S EKXG351E100MJ20S EKXG351E220MK20S EKXG351E330ML20S EKXG351E470ML20S EKXG351E680ML25S EKXG351E680MM20S EKXG351E820MM25S EKXG351E101MM25S EKXG351E121MMN3S EKXG351E151MMP1S EKXG401E6R8MJ16S EKXG401E100MJ20S EKXG401E150MK20S EKXG401E220MK20S EKXG401E330ML20S EKXG401E470ML25S EKXG401E470MM20S EKXG401E680MM25S EKXG401E820MM25S EKXG401E101MMN3S EKXG401E121MMP1S EKXG401E151MM40S EKXG451E6R8MJ20S EKXG451E100MK20S EKXG451E150MK25S EKXG451E220ML20S EKXG451E330ML25S EKXG451E330MM20S EKXG451E470MM25S EKXG451E680MMN3S EKXG451E820MMP1S EKXG451E101MM40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 184 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KWA 400 to 450Vdc, long life, 105 New! Series Ideal for low profile power supply applications Longer life form KHE series Rated voltage range : 400 to 450Vdc, Capacitance range : 27 to 120F Endurance with ripple current : 5,000 hours at 105 Non solvent resistant type RoHS Compliant KWA Longer life KHE P187 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 400 to 450Vdc (at 20, 120Hz) 20% (M) I=0.04CV+100 (after 1 minute) I=0.02CV+25 (after 5 minutes) Where, I : Max. leakage current(A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 400 to 450V tan (Max.) 0.20 (at 20, 120Hz) Rated voltage (Vdc) 400V 420V 450V Z(-25)/Z(+20) 5 6 6 Z(-40)/Z(+20) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Brown) 10 F0.5 Terminal D d F D' 15min. L' Vent 4min. L' (10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5 max. L+2.0 max. 18 0.8 7.5 D' d Sleeve (PET : Brown) 12.5 F0.5 Gas escape end seal L' Vent 15min. 4min. (12.5 to 18) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E K WA A A A E A A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 185 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105 KWASeries New! STANDARD RATINGS WV (Vdc) 400 420 Cap (F) Rated ripple Case size current tan (mArms/ DxL(mm) 105, 120Hz) 33 39 47 56 56 68 82 82 100 100 100 120 120 120 33 39 47 56 56 68 68 82 82 100 100 100 120 120 120 10x30 10x35 10x40 10x45 12.5x30 12.5x35 12.5x40 14.5x31.5 12.5x45 14.5x40 16x31.5 14.5x45 16x35 18x31.5 10x30 10x35 10x40 10x50 12.5x30 12.5x35 14.5x31.5 12.5x40 14.5x35 12.5x50 14.5x40 16x31.5 14.5x45 16x35 18x31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 320 370 420 480 460 530 610 590 690 700 710 790 800 800 320 370 420 500 460 530 530 610 620 680 700 710 790 800 800 Part No. EKWA401E330MJ30S EKWA401E390MJ35S EKWA401E470MJ40S EKWA401E560MJ45S EKWA401E560MK30S EKWA401E680MK35S EKWA401E820MK40S EKWA401E820MUN3S EKWA401E101MK45S EKWA401E101MU40S EKWA401E101MLN3S EKWA401E121MU45S EKWA401E121ML35S EKWA401E121MMN3S EKWA421E330MJ30S EKWA421E390MJ35S EKWA421E470MJ40S EKWA421E560MJ50S EKWA421E560MK30S EKWA421E680MK35S EKWA421E680MUN3S EKWA421E820MK40S EKWA421E820MU35S EKWA421E101MK50S EKWA421E101MU40S EKWA421E101MLN3S EKWA421E121MU45S EKWA421E121ML35S EKWA421E121MMN3S WV (Vdc) Cap (F) Rated ripple Case size current tan (mArms/ DxL(mm) 105, 120Hz) 450 27 33 39 47 47 56 68 68 82 82 82 100 100 120 10x30 10x35 10x40 10x45 12.5x30 12.5x35 12.5x40 14.5x31.5 12.5x45 14.5x35 16x31.5 14.5x45 16x35 18x31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 290 340 380 440 420 480 550 530 630 620 640 720 730 800 Part No. EKWA451E270MJ30S EKWA451E330MJ35S EKWA451E390MJ40S EKWA451E470MJ45S EKWA451E470MK30S EKWA451E560MK35S EKWA451E680MK40S EKWA451E680MUN3S EKWA451E820MK45S EKWA451E820MU35S EKWA451E820MLN3S EKWA451E101MU45S EKWA451E101ML35S EKWA451E121MMN3S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 27 to 82 100 to 120 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 186 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KHE Series 400 to 450Vdc, Downsized, 105 KHE Ideal for low profile power supply applications Downsize, high ripple design Rated voltage range : 400 to 450Vdc, Capacitance range : 27 to 120F Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant Downsized PAG P189 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 400 to 450Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current(A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 400V 420V 450V tan (Max.) 0.15 0.20 0.20 (at 20, 120Hz) Rated voltage (Vdc) 400V 420V 450V Z(-25)/Z(+20) 5 6 6 Z(-40)/Z(+20) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Brown) 10 F0.5 Terminal D d F D' 15min. L' Vent 4min. L' (10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5 max. L+2.0 max. 18 0.8 7.5 D' d Sleeve (PET : Brown) 12.5 F0.5 Gas escape end seal L' Vent 15min. 4min. (12.5 to 18) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KHE AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 187 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, Downsized, 105 KHESeries STANDARD RATINGS WV (Vdc) 400 420 Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 33 39 47 56 56 68 82 82 100 100 100 120 120 120 33 39 47 56 56 68 82 82 100 100 100 120 120 120 10x30 10x35 10x40 10x45 12.5x30 12.5x35 12.5x40 14.5x31.5 12.5x45 14.5x35 16x31.5 14.5x40 16x35 18x31.5 10x30 10x35 10x40 10x50 12.5x30 12.5x35 12.5x40 14.5x31.5 12.5x50 14.5x40 16x31.5 14.5x45 16x35 18x31.5 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 335 385 445 505 480 560 640 625 730 715 720 810 810 815 335 385 445 520 480 560 640 625 750 740 720 835 810 815 Part No. EKHE401E330MJ30S EKHE401E390MJ35S EKHE401E470MJ40S EKHE401E560MJ45S EKHE401E560MK30S EKHE401E680MK35S EKHE401E820MK40S EKHE401E820MUN3S EKHE401E101MK45S EKHE401E101MU35S EKHE401E101MLN3S EKHE401E121MU40S EKHE401E121ML35S EKHE401E121MMN3S EKHE421E330MJ30S EKHE421E390MJ35S EKHE421E470MJ40S EKHE421E560MJ50S EKHE421E560MK30S EKHE421E680MK35S EKHE421E820MK40S EKHE421E820MUN3S EKHE421E101MK50S EKHE421E101MU40S EKHE421E101MLN3S EKHE421E121MU45S EKHE421E121ML35S EKHE421E121MMN3S WV (Vdc) Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 450 27 33 39 47 47 56 68 68 82 82 82 100 100 120 10x30 10x35 10x40 10x45 12.5x30 12.5x35 12.5x40 14.5x31.5 12.5x45 14.5x35 16x31.5 14.5x40 16x35 18x31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 305 355 405 460 440 505 580 570 660 650 655 740 740 815 Part No. EKHE451E270MJ30S EKHE451E330MJ35S EKHE451E390MJ40S EKHE451E470MJ45S EKHE451E470MK30S EKHE451E560MK35S EKHE451E680MK40S EKHE451E680MUN3S EKHE451E820MK45S EKHE451E820MU35S EKHE451E820MLN3S EKHE451E101MU40S EKHE451E101ML35S EKHE451E121MMN3S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 27 to 82 100 to 120 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 188 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PAG Series 200 to 450Vdc, Downsized, 105 PAG Downsize, high ripple design (10 to 18) Rated voltage range : 200 to 450Vdc, Capacitance range : 18 to 560F Endurance with ripple current : 2,000 hours at 105 Ideal for low profile power supply applications Non solvent resistant type RoHS Compliant Downsized Higher ripple KMG P142 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (200, 400Vdc) -25 to+105 (420, 450Vdc) 200 to 450Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current(A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 200V 400V 420V 450V tan (Max.) 0.12 0.15 0.20 0.20 (at 20, 120Hz) Rated voltage (Vdc) 200V 400V 420V 450V Z(-25)/Z(+20) 3 5 6 6 Z(-40)/Z(+20) 6 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] D' F0.5 Sleeve (PET : Brown) 10 & 12.5 F0.5 Code : E d Terminal D d F D' 15min. L' Vent 4min. (10) (12.5) L' 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5 max. L+2.0 max. 18 0.8 7.5 D' d Sleeve (PET : Brown) 14.5 F0.5 Gas escape end seal L' Vent 15min. 4min. (14.5 to 18) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E P AG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22F:220,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 200V:201,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 189 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 200 to 450Vdc, Downsized, 105 PAGSeries STANDARD RATINGS WV (Vdc) 200 400 Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 82 100 120 150 180 220 220 270 270 330 330 390 390 470 560 27 33 39 47 56 68 68 82 100 100 120 120 150 150 180 220 10x30 10x35 10x40 12.5x30 12.5x35 12.5x40 14.5x30 14.5x35 16x30 16x35 18x30 16x40 18x35 18x40 18x45 10x30 10x35 10x40 12.5x30 12.5x35 12.5x40 14.5x30 14.5x35 14.5x40 16x30 16x35 18x30 16x40 18x35 18x40 18x45 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 440 510 590 650 750 830 830 960 960 1,100 1,100 1,240 1,240 1,390 1,560 260 300 340 370 420 480 480 530 580 580 670 670 770 770 880 1,000 WV (Vdc) Part No. EPAG201E820MJ30S EPAG201E101MJ35S EPAG201E121MJ40S EPAG201E151MK30S EPAG201E181MK35S EPAG201E221MK40S EPAG201E221MU30S EPAG201E271MU35S EPAG201E271ML30S EPAG201E331ML35S EPAG201E331MM30S EPAG201E391ML40S EPAG201E391MM35S EPAG201E471MM40S EPAG201E561MM45S EPAG401E270MJ30S EPAG401E330MJ35S EPAG401E390MJ40S EPAG401E470MK30S EPAG401E560MK35S EPAG401E680MK40S EPAG401E680MU30S EPAG401E820MU35S EPAG401E101MU40S EPAG401E101ML30S EPAG401E121ML35S EPAG401E121MM30S EPAG401E151ML40S EPAG401E151MM35S EPAG401E181MM40S EPAG401E221MM45S 420 450 Cap (F) Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 22 27 33 39 47 56 56 68 68 82 82 100 100 120 150 18 22 27 33 39 47 47 56 56 68 68 82 82 100 120 150 10x30 10x35 10x40 12.5x30 12.5x35 12.5x40 14.5x30 14.5x35 16x30 14.5x40 16x35 16x40 18x30 18x35 18x40 10x30 10x35 10x40 12.5x30 12.5x35 12.5x40 14.5x30 14.5x35 16x30 14.5x40 16x35 16x40 18x30 18x35 18x40 18x45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 230 270 310 330 390 430 430 510 510 570 570 610 610 690 790 210 240 280 310 350 390 390 440 440 500 500 550 550 650 740 810 Part No. EPAG421E220MJ30S EPAG421E270MJ35S EPAG421E330MJ40S EPAG421E390MK30S EPAG421E470MK35S EPAG421E560MK40S EPAG421E560MU30S EPAG421E680MU35S EPAG421E680ML30S EPAG421E820MU40S EPAG421E820ML35S EPAG421E101ML40S EPAG421E101MM30S EPAG421E121MM35S EPAG421E151MM40S EPAG451E180MJ30S EPAG451E220MJ35S EPAG451E270MJ40S EPAG451E330MK30S EPAG451E390MK35S EPAG451E470MK40S EPAG451E470MU30S EPAG451E560MU35S EPAG451E560ML30S EPAG451E680MU40S EPAG451E680ML35S EPAG451E820ML40S EPAG451E820MM30S EPAG451E101MM35S EPAG451E121MM40S EPAG451E151MM45S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 18 to 82 100 to 560 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 190 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KLJ Series rk with a p s 't n Does r voltage! DC ove Doesn't spark with DC over voltage Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type ESR value prescribed RoHS Compliant Overvoltage resistant design, 105 KLJ Downsized KLG P193 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 200 to 450Vdc 20% (M) I=0.04CV+100 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 200V 400V 450V tan (Max.) 0.20 0.24 0.24 Rated voltage (Vdc) 200V 400V 450V Z(-25)/Z(+20) 4 6 6 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 1 minute) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Endurance Shelf Life DIMENSIONS [mm] d D' F0.5 Code : E Sleeve (PET : Brown) F0.5 Terminal L' 15min. 4min. (10) Vent (12.5 to 18) Gas escape end seal D d F D' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 D+0.5max. L+1.5max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KL J 2 0 1 E LL 1 0 1 M L 2 0 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 200V:201,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 4.7 to 10F 15 to 47F 56 to 330F 120 1.00 1.00 1.00 300 1.35 1.25 1.15 1k 1.75 1.50 1.30 10k 2.30 1.75 1.40 50k 2.50 1.80 1.50 100k 2.70 1.85 1.60 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 191 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105 KLJSeries STANDARD RATINGS WV (Vdc) Cap (F) 200 400 450 33 39 56 82 100 120 150 180 180 220 220 270 330 4.7 10 15 18 22 27 33 39 39 47 47 56 68 68 82 82 100 120 39 39 47 47 56 68 82 82 100 110 120 Case size DxL(mm) tan ESR (max/20, 100kHz) Rated ripple current (mArms/105, 120Hz) Part No. 10x 20 10x 25 12.5x 20 12.5x 25 16x20 16x25 18x20 16x31.5 18x25 16x35.5 18x31.5 18x35.5 18x40 10x 12.5 10x 16 10x20 10x25 12.5x20 12.5x25 16x20 18x20 18x25 16x25 18x20 16x31.5 16x35.5 18x25 16x40 18x31.5 18x35.5 18x40 16x 25 18x20 16x25 18x25 16x31.5 16x35.5 16x40 18x31.5 18x 40 18x 40 18x 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 1.8 1.4 1.0 0.72 0.63 0.44 0.31 0.36 0.30 0.30 0.28 0.24 0.21 8.4 5.7 4.0 3.2 2.7 1.9 1.5 1.2 0.72 1.1 1.2 0.84 0.72 0.88 0.65 0.64 0.54 0.49 1.4 1.4 1.3 1.2 1.1 0.86 0.79 0.78 0.67 0.59 0.58 165 200 265 350 390 465 505 615 585 695 700 805 900 36 64 105 110 165 200 225 255 270 290 280 340 385 360 435 425 490 540 265 255 290 320 340 420 435 425 490 540 570 EKLJ201E330MJ20S EKLJ201E390MJ25S EKLJ201E560MK20S EKLJ201E820MK25S EKLJ201E101ML20S EKLJ201E121ML25S EKLJ201E151MM20S EKLJ201E181MLN3S EKLJ201E181MM25S EKLJ201E221MLP1S EKLJ201E221MMN3S EKLJ201E271MMP1S EKLJ201E331MM40S EKLJ401E4R7MJC5S EKLJ401E100MJ16S EKLJ401E150MJ20S EKLJ401E180MJ25S EKLJ401E220MK20S EKLJ401E270MK25S EKLJ401E330ML20S EKLJ401E390MM20S EKLJ401E390MM25S EKLJ401E470ML25S EKLJ401E470MM20S EKLJ401E560MLN3S EKLJ401E680MLP1S EKLJ401E680MM25S EKLJ401E820ML40S EKLJ401E820MMN3S EKLJ401E101MMP1S EKLJ401E121MM40S EKLJ451E390ML25S EKLJ451E390MM20S EKLJ451E470ML25S EKLJ451E470MM25S EKLJ451E560MLN3S EKLJ451E680MLP1S EKLJ451E820ML40S EKLJ451E820MMN3S EKLJ451E101MM40S EKLJ451E111MM40S EKLJ451E121MM45S : Enter the appropriate lead forming or taping code. DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following excess DC voltage is applied. Test DC voltage Rated voltage 200Vdc 400Vdc 450Vdc Test Nominal capacitance 330F 330F 100F 100FC120F Current limit 4A 5A 2A 4A 100F 100FC120F 2A 4A circuit Test DC voltage 300/375Vdc + AC input SW CX - 500/600Vdc Constant DC voltage/current power supply 550/675Vdc Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 192 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105 KLG Series KLJ P191 Downsized Doesn't spark with DC over voltage Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant KLG SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 200 & 400Vdc 20% (M) I=0.04CV+100 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 200V 400V tan (Max.) 0.20 0.24 Rated voltage (Vdc) 200V 400V Z(-25)/Z(+20) 4 6 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 1 minute) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current 500% of the initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : E d Sleeve (PET : Brown) F0.5 Terminal D D' d F D' L' 15min. 4min. Vent L' Gas escape end seal 16 18 0.8 7.5 D+0.5max. L+1.5max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KLG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470,100F:101) Lead forming*taping code T erminal code Voltage code (ex. 200V:201,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 193 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105 KLGSeries STANDARD RATINGS WV (Vdc) Cap (F) 200 82 100 100 120 120 130 150 150 150 180 180 220 220 270 330 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 16x20 16x25 18x20 16x31.5 18x25 18x20 16x31.5 18x20 18x25 16x40 18x31.5 18x35.5 18x40 18x45 18x45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 230 425 250 500 475 285 560 315 530 645 630 725 735 830 920 Part No. EKLG201E820ML20S EKLG201E101ML25S EKLG201E101MM20S EKLG201E121MLN3S EKLG201E121MM25S EKLG201E131MM20S EKLG201E151MLN3S EKLG201E151MM20S EKLG201E151MM25S EKLG201E181ML40S EKLG201E181MMN3S EKLG201E221MMP1S EKLG201E221MM40S EKLG201E271MM45S EKLG201E331MM45S WV (Vdc) Cap (F) 400 22 22 33 33 39 39 47 47 56 56 68 82 100 Rated ripple current Case size tan (mArms/ DxL(mm) 105, 120Hz) 16x20 16x25 16x25 18x20 16x31.5 18x25 16x31.5 18x25 16x40 18x31.5 18x35.5 18x40 18x40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 145 200 220 225 245 250 275 280 350 315 350 395 450 Part No. EKLG401E220ML20S EKLG401E220ML25S EKLG401E330ML25S EKLG401E330MM20S EKLG401E390MLN3S EKLG401E390MM25S EKLG401E470MLN3S EKLG401E470MM25S EKLG401E560ML40S EKLG401E560MMN3S EKLG401E680MMP1S EKLG401E820MM40S EKLG401E101MM40S : Enter the appropriate lead forming or taping code. DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following excess DC voltage is applied. Test Test DC voltage Rated voltage 200Vdc 400Vdc Nominal capacitance 330F 330F 100F 100F Current limit 4A 5A 2A 4A circuit Test DC voltage 300/375Vdc + AC input SW CX - 500/600Vdc Constant DC voltage/current power supply RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 22 to 47F 56 to 330F 120 1.00 1.00 300 1.25 1.15 1k 1.50 1.30 10k 1.75 1.40 50k 1.80 1.50 100k 1.85 1.60 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 194 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXE 160 to 400Vdc long life, 105 Upgrade! Series For LED light circuits and other long life applications Rated voltage range : 160 to 400 Vdc , Capacitance range : 1.0 to 33F Endurance with ripple current : 10,000 to 12,000 hours at 105 Non solvent resistant type RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 160 to 400Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 160 to 400V tan (Max.) 0.24 (at 20, 120Hz) Rated voltage (Vdc) 160 to 400V Z(-25)/Z(+20) 4 Z(-40)/Z(+20) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (12,000 hours for10x16L) at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' Vent 4min. 15min. (8 &10) D F F D' L' 8 0.6 3.5 10 0.6 5.0 D+0.5max. L+1.5max. L+2.0max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXE AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3.3F:3R3,33F:330) Lead forming*taping code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 to 33 120 1.00 1k 1.75 10k 2.25 100k 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 195 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 400Vdc long life, 105 KXESeries Upgrade! STANDARD RATINGS WV (Vdc) Cap (F) 10 15 160 200 250 400 15 22 27 33 10 12 12 15 18 27 6.8 10 1.0 2.2 2.7 3.3 3.3 3.9 4.7 5.6 6.8 6.8 Case size DxL(mm) Rated ripple current(mArms/105) tan 120Hz 100kHz Part No. 8x 11.5 8x 15 0.24 0.24 55 75 137 187 EKXE161E100MHB5D EKXE161E150MH15D 10x 12.5 10x 12.5 10x 16 10x 16 8x 11.5 8x15 10x12.5 10x16 10x12.5 10x16 8 x 11.5 8x15 8 x11.5 8x11.5 8x 11.5 8x 11.5 10x 12.5 8x 15 10x 16 10x 16 10x 12.5 10x 16 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 80 95 105 130 55 70 70 90 85 120 45 60 25 40 45 50 60 65 90 100 85 115 200 237 262 325 137 175 175 225 212 300 112 150 62 100 112 125 150 162 225 250 212 287 EKXE161E150MJC5S EKXE161E220MJC5S EKXE161E270MJ16S EKXE161E330MJ16S EKXE201E100MHB5D EKXE201E120MH15D EKXE201E120MJC5S EKXE201E150MJ16S EKXE201E180MJC5S EKXE201E270MJ16S EKXE251E6R8MHB5D EKXE251E100MH15D EKXE401E1R0MHB5D EKXE401E2R2MHB5D EKXE401E2R7MHB5D EKXE401E3R3MHB5D EKXE401E3R3MJC5S EKXE401E3R9MH15D EKXE401E4R7MJ16S EKXE401E5R6MJ16S EKXE401E6R8MJC5S EKXE401E6R8MJ16S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 196 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for5 to8 product, 105 LE Series Suitable for long life and high reliability products Downsize and long life Endurance with ripple current10,000 hours at 105 Case size range5x11L to 8x11.5L Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATION Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 10 to 100Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 100V tan (Max.) 0.45 0.35 0.30 0.22 0.19 0.17 0.15 Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 100V Z(-25)/Z(20) 8 6 4 4 3 3 3 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20,120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105. Capacitance change 25 of the initial value D.F. (tan) 300 of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : E d Sleeve (PET : Brown) F0.5 Terminal D d D' F D' L' L' 15min. 5 0.5 2.0 8 6.3 0.6 0.5 3.5 2.5 D+0.5max. L+1.5max. 4min. Gas escape end seal Vent (Except 5) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L E AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7, 10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 16V:160, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 197 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for5 to8 product, 105 LESeries STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 100 Cap (F) Case size DxL(mm) tan Rated ripple current (mArms/105, 100kHz) Part No. 100 220 330 47 100 220 33 47 100 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 100 10 22 33 47 1.0 2.2 3.3 4.7 10 22 5 x11 6.3 x 11 8 x 11.5 5x11 6.3 x11 8 x11.5 5x 11 5 x 11 6.3x11 5x 11 6.3 x11 8x11.5 5x 11 5x 11 5x 11 5x 11 5 x11 5 x11 6.3 x11 6.3 x11 8x11.5 5 x 11 6.3 x11 6.3 x11 8 x11.5 5 x 11 5x 11 5x 11 5x 11 6.3 x11 8 x11.5 0.45 0.45 0.45 0.35 0.35 0.35 0.30 0.30 0.30 0.22 0.22 0.22 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.17 0.17 0.17 0.17 0.15 0.15 0.15 0.15 0.15 0.15 130 210 330 130 210 330 130 130 210 130 210 330 25 35 70 80 90 110 190 190 270 80 170 170 240 40 50 60 70 150 230 ELE-100E101ME11D ELE-100E221MF11D ELE-100E331MHB5D ELE-160E470ME11D ELE-160E101MF11D ELE-160E221MHB5D ELE-250E330ME11D ELE-250E470ME11D ELE-250E101MF11D ELE-350E330ME11D ELE-350E470MF11D ELE-350E101MHB5D ELE-500E1R0ME11D ELE-500E2R2ME11D ELE-500E3R3ME11D ELE-500E4R7ME11D ELE-500E100ME11D ELE-500E220ME11D ELE-500E330MF11D ELE-500E470MF11D ELE-500E101MHB5D ELE-630E100ME11D ELE-630E220MF11D ELE-630E330MF11D ELE-630E470MHB5D ELE-101E1R0ME11D ELE-101E2R2ME11D ELE-101E3R3ME11D ELE-101E4R7ME11D ELE-101E100MF11D ELE-101E220MHB5D : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1.0 to 10 22 to 33 47 to 330 120 0.42 0.55 0.70 1k 0.60 0.75 0.85 10k 0.80 0.90 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 198 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for4 to8 product, 105 FL Series Long life and high reliability for4x5L to8x7L mm range Endurance with ripple current : 3,000 hours at 105 Suitable for long life and high reliability products Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 50Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tan (Max.) 0.50 0.40 0.35 0.30 0.25 0.25 (at 20, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Endurance Shelf Life DIMENSIONS [mm] Code : E D' F0.5 d Sleeve (PET : Brown)* F0.5 Terminal or 4min. 15min. L' Gas escape end seal *8x5L : Coating case 5mm Height D d F D' L' 7mm Height 8 6.3 5 4 0.45 0.45 0.45 0.45 1.5 2.0 2.5 2.5 D+0.5max. L+1.0max. 8 6.3 5 4 0.45 0.45 0.45 0.45 1.5 2.0 2.5 3.5 D+0.5max. L+1.0max. D d F D' L' PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E F L - AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 199 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for4 to8 product, 105 FLSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (F) Case size DxL(mm) 33 47 56 82 100 150 220 270 22 33 33 47 68 100 150 220 15 22 22 33 47 68 100 150 10 15 15 22 33 56 68 100 4.7 6.8 10 10 22 22 33 47 1.0 2.2 3.3 4.7 4.7 6.8 10 15 22 22 tan 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 4x5 4x5 4x5 4x7 5x5 5x7 6.3x5 6.3x7 8x5 8x7 Impedance ( max./20, 100kHz) 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 19 14 11 9.0 6.0 4.8 2.9 2.2 2.6 1.6 Rated ripple current (mArms/105, 100kHz) 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 18 22 26 30 40 50 63 90 84 120 Part No. EFL-6R3E330MD05D EFL-6R3E470MD07D EFL-6R3E560ME05D EFL-6R3E820ME07D EFL-6R3E101MF05D EFL-6R3E151MF07D EFL-6R3E221MH05G EFL-6R3E271MH07D EFL-100E220MD05D EFL-100E330MD07D EFL-100E330ME05D EFL-100E470ME07D EFL-100E680MF05D EFL-100E101MF07D EFL-100E151MH05G EFL-100E221MH07D EFL-160E150MD05D EFL-160E220MD07D EFL-160E220ME05D EFL-160E330ME07D EFL-160E470MF05D EFL-160E680MF07D EFL-160E101MH05G EFL-160E151MH07D EFL-250E100MD05D EFL-250E150MD07D EFL-250E150ME05D EFL-250E220ME07D EFL-250E330MF05D EFL-250E560MF07D EFL-250E680MH05G EFL-250E101MH07D EFL-350E4R7MD05D EFL-350E6R8MD07D EFL-350E100ME05D EFL-350E100ME07D EFL-350E220MF05D EFL-350E220MF07D EFL-350E330MH05G EFL-350E470MH07D EFL-500E1R0MD05D EFL-500E2R2MD05D EFL-500E3R3MD05D EFL-500E4R7MD07D EFL-500E4R7ME05D EFL-500E6R8ME07D EFL-500E100MF05D EFL-500E150MF07D EFL-500E220MH05G EFL-500E220MH07D : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) to 4.7 to 10 to 220 to Frequency(Hz) 3.3 6.8 150 270 120 0.20 0.35 0.40 0.50 1k 0.66 0.70 0.75 0.85 10k 0.90 0.90 0.90 0.94 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 200 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GPA Long life, Downsized, 125 Upgrade! Series Guaranteed short time at 150 Downsized, low impedance and high-ripple current version of GXE series Specified ESR after endurance test For high ripple current automotive applications. (Direct fuel injection and electric power steering etc.) Endurance with ripple current : 3,000 to 5,000 hours at 125 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant P206 GXE Downsized Higher ripple current GPA Higher temperature LXZ P171 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 25 to 100Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tan (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 2 2 2 2 2 2 Z(-40)/Z(+20) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 . Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after the test condition that the rated voltage is applied for 100 hours at 150 and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,500 hours (2,500 hours for 25L and less) at 125. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' Vent 15min. 4min. Gas escape end seal D d F D' L' 12.5 0.6 5.0 14.5 16 0.8 0.8 7.5 7.5 D+0.5max. L+1.5max. 18 0.8 7.5 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GPA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470F:471, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 201 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Downsized, 125 GPASeries Upgrade! STANDARD RATINGS WV Vdc 25 35 50 Cap F 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 5,600 6,800 680 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 4,700 470 560 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,800 1,800 2,200 2,200 2,700 Case size DxL(mm) 12.5x20 14.5x20 12.5x25 16x20 12.5x30 14.5x25 12.5x35 14.5x30 16x25 18x20 12.5x40 14.5x35 16x30 16x35 18x25 14.5x40 18x30 16x40 18x35 18x40 12.5x20 12.5x25 14.5x20 12.5x30 14.5x25 16x20 12.5x35 14.5x30 18x20 12.5x40 16x25 14.5x35 16x30 18x25 14.5x40 16x35 18x30 16x40 18x35 18x40 12.5x20 14.5x20 12.5x25 16x20 12.5x30 14.5x25 12.5x35 14.5x30 16x25 18x20 12.5x40 14.5x35 16x30 18x25 16x35 14.5x40 18x30 16x40 18x35 18x40 ESR (Initial) ( max./100kHz) ESR (End of Life) ( max./100kHz) 20 -40 20 0.044 0.037 0.033 0.034 0.029 0.028 0.024 0.023 0.026 0.032 0.021 0.021 0.023 0.020 0.024 0.018 0.022 0.017 0.019 0.016 0.044 0.033 0.037 0.029 0.028 0.034 0.024 0.023 0.032 0.021 0.026 0.021 0.023 0.024 0.018 0.020 0.022 0.017 0.019 0.016 0.065 0.055 0.048 0.043 0.041 0.040 0.034 0.036 0.031 0.039 0.028 0.029 0.027 0.029 0.023 0.024 0.026 0.020 0.022 0.018 0.22 0.19 0.17 0.17 0.13 0.14 0.11 0.10 0.13 0.16 0.095 0.095 0.10 0.090 0.12 0.081 0.099 0.077 0.086 0.072 0.22 0.17 0.19 0.13 0.14 0.17 0.11 0.10 0.16 0.095 0.13 0.095 0.10 0.12 0.081 0.090 0.099 0.077 0.086 0.072 0.33 0.28 0.24 0.22 0.18 0.20 0.15 0.16 0.16 0.20 0.13 0.13 0.13 0.15 0.10 0.11 0.12 0.090 0.10 0.080 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.060 0.070 0.050 0.080 0.040 0.070 0.030 0.18 0.13 0.11 0.11 0.080 0.10 0.090 0.070 0.090 0.080 0.080 0.060 0.070 0.070 0.050 0.060 0.080 0.040 0.070 0.030 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.070 0.060 0.050 0.080 0.040 0.070 0.030 -40 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.70 0.50 0.50 0.60 0.60 0.50 0.40 2.2 1.6 1.3 1.3 0.90 1.3 0.80 0.70 0.60 0.50 1.1 0.70 0.90 0.50 0.50 0.70 0.60 0.60 0.50 0.40 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.50 0.70 0.50 0.60 0.60 0.50 0.40 Rated ripple current (mArms/125, 100kHz) Part No. 1,820 2,100 2,400 2,280 2,560 2,800 2,970 3,060 3,100 2,490 3,600 3,380 3,160 3,590 3,200 4,000 3,390 4,300 4,200 4,600 1,820 2,400 2,100 2,560 2,800 2,280 2,970 3,060 2,490 3,600 3,100 3,380 3,160 3,200 4,000 3,590 3,390 4,300 4,200 4,600 1,500 1,740 1,900 2,040 2,150 2,190 2,510 2,470 2,620 2,240 2,870 2,840 2,940 2,750 3,300 3,230 3,140 3,720 3,510 3,940 EGPA250E122MK20S EGPA250E152MU20S EGPA250E182MK25S EGPA250E182ML20S EGPA250E222MK30S EGPA250E222MU25S EGPA250E272MK35S EGPA250E272MU30S EGPA250E272ML25S EGPA250E272MM20S EGPA250E332MK40S EGPA250E332MU35S EGPA250E332ML30S EGPA250E392ML35S EGPA250E392MM25S EGPA250E472MU40S EGPA250E472MM30S EGPA250E562ML40S EGPA250E562MM35S EGPA250E682MM40S EGPA350E681MK20S EGPA350E102MK25S EGPA350E102MU20S EGPA350E122MK30S EGPA350E122MU25S EGPA350E122ML20S EGPA350E152MK35S EGPA350E152MU30S EGPA350E152MM20S EGPA350E182MK40S EGPA350E182ML25S EGPA350E222MU35S EGPA350E222ML30S EGPA350E222MM25S EGPA350E272MU40S EGPA350E272ML35S EGPA350E272MM30S EGPA350E332ML40S EGPA350E332MM35S EGPA350E472MM40S EGPA500E471MK20S EGPA500E561MU20S EGPA500E681MK25S EGPA500E681ML20S EGPA500E821MK30S EGPA500E821MU25S EGPA500E102MK35S EGPA500E102MU30S EGPA500E102ML25S EGPA500E102MM20S EGPA500E122MK40S EGPA500E122MU35S EGPA500E122ML30S EGPA500E122MM25S EGPA500E152ML35S EGPA500E182MU40S EGPA500E182MM30S EGPA500E222ML40S EGPA500E222MM35S EGPA500E272MM40S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 202 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Downsized, 125 GPASeries Upgrade! STANDARD RATINGS WV Vdc 63 80 100 Cap F Case size DxL(mm) 470 680 680 820 1,000 1,000 1,200 1,200 1,500 1,800 330 470 470 560 560 680 680 820 820 1,200 200 270 300 360 390 470 510 560 620 750 16x20 16x25 18x20 16x30 16x35 18x25 16x40 18x30 18x35 18x40 16x20 16x25 18x20 16x30 18x25 16x35 18x30 16x40 18x35 18x40 16x20 18x20 16x25 16x30 18x25 16x35 18x30 16x40 18x35 18x40 ESR (Initial) ( max./100kHz) ESR (End of Life) ( max./100kHz) 20 -40 20 -40 0.085 0.061 0.070 0.053 0.044 0.049 0.036 0.041 0.035 0.030 0.085 0.061 0.070 0.053 0.049 0.044 0.041 0.036 0.035 0.030 0.11 0.091 0.079 0.068 0.064 0.056 0.054 0.046 0.044 0.039 0.58 0.48 0.49 0.41 0.33 0.34 0.26 0.26 0.21 0.18 0.58 0.48 0.49 0.41 0.34 0.33 0.26 0.26 0.21 0.18 0.88 0.73 0.72 0.62 0.50 0.50 0.39 0.39 0.32 0.27 0.19 0.14 0.19 0.090 0.070 0.14 0.060 0.090 0.070 0.060 0.19 0.14 0.19 0.090 0.14 0.070 0.090 0.060 0.070 0.060 0.25 0.22 0.18 0.13 0.15 0.090 0.13 0.080 0.090 0.080 3.0 2.0 3.0 1.3 0.90 2.0 0.80 1.3 0.90 0.80 3.0 2.0 3.0 1.3 2.0 0.90 1.3 0.80 0.90 0.80 3.9 3.9 2.7 1.9 2.7 1.3 1.9 1.1 1.3 1.1 Rated ripple current (mArms/125,100kHz) Part No. 1,790 2,030 1,910 2,330 2,580 2,280 2,900 2,580 2,890 3,210 1,790 2,030 1,910 2,330 2,280 2,580 2,580 2,900 2,890 3,210 1,580 1,690 1,990 2,250 2,110 2,500 2,410 2,700 2,690 2,880 EGPA630E471ML20S EGPA630E681ML25S EGPA630E681MM20S EGPA630E821ML30S EGPA630E102ML35S EGPA630E102MM25S EGPA630E122ML40S EGPA630E122MM30S EGPA630E152MM35S EGPA630E182MM40S EGPA800E331ML20S EGPA800E471ML25S EGPA800E471MM20S EGPA800E561ML30S EGPA800E561MM25S EGPA800E681ML35S EGPA800E681MM30S EGPA800E821ML40S EGPA800E821MM35S EGPA800E122MM40S EGPA101E201ML20S EGPA101E271MM20S EGPA101E301ML25S EGPA101E361ML30S EGPA101E391MM25S EGPA101E471ML35S EGPA101E511MM30S EGPA101E561ML40S EGPA101E621MM35S EGPA101E751MM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 200 270 to 560 620 to 1,800 2,200 to 3,900 4,700 to 6,800 120 0.40 0.50 0.60 0.75 0.85 1k 0.82 0.85 0.87 0.90 0.95 10k 0.93 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 203 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GVA Vibration resistant structure, 125 New! Series 2 Structure of higher vibration by GPA series (acceleration 392m/s , 40G) High temperature resistance 100 hours at 150 Designed for electric power steering and ECU(include engine control, direct fuel injection) etc. Rated voltage range : 25 to 100V, Capacitance range : 430 to 5,100F Solvent resistant type RoHS Compliant GPA P201 Vibration resistance GVA SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life Vibration -40 to +125 25 to 100Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tan (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 2 2 2 2 2 2 Z(-40)/Z(+20) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125 . Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after the test condition that the rated voltage is applied for 100 hours at 150 and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,500 hours at 125. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35). Capacitance change 5 of the initial value D.F. (tan) The initial specified value Leakage current The initial specified value Vibration profile Vibration frequency range Amplitude or Acceleration Sweep rate Direction and period of motion Fixation 10 to 2,000Hz 1.5mm peak to peak or 392m/s2(40G), whichever is the less severe 10 to 2,000 to 10Hz 0.5 octave/minute 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fix main body and Lead teminal using a fixture tool, please contact us for detail. DIMENSIONS [mm] F0.5 Code : E D' Coated Case d Terminal Vent L' 15min. 4min. Gas escape end seal D F F D' L' 18 0.8 7.5 D+0.5max. L+1.5max. * Please contact us about lead formings and mounting methods. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 204 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Vibration resistant structure, 125 GVASeries New! PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GVA AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560F:561, 2,000F:202) Lead forming*taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS Cap (F) WV (Vdc) 3,900 5,100 2,700 3,600 1,600 2,000 1,200 1,500 750 910 430 560 25 35 50 63 80 100 ESR ( max./100kHz) Case size DxL(mm) 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 20 -40 0.023 0.019 0.023 0.019 0.027 0.022 0.045 0.036 0.045 0.036 0.055 0.044 0.11 0.086 0.11 0.086 0.14 0.10 0.34 0.26 0.34 0.26 0.41 0.32 Rated ripple current (mArms/125, 100kHz) Part No. 3,330 3,750 3,330 3,750 3,000 3,450 2,530 2,870 2,530 2,870 2,290 2,620 EGVA250E392MM30H EGVA250E512MMP1H EGVA350E272MM30H EGVA350E362MMP1H EGVA500E162MM30H EGVA500E202MMP1H EGVA630E122MM30H EGVA630E152MMP1H EGVA800E751MM30H EGVA800E911MMP1H EGVA101E431MM30H EGVA101E561MMP1H : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 430 to 560 750 to 2,000 2,700 to 3,900 5,100 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 205 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GXE Series For automobile modules and other high temperature applications GXE Downsize, long life, low impedance and better low temperature characteristics Endurance with ripple current : 2,000 to 5,000 hours at 125 Solvent resistant type except 63 to 450V (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Long Life, Downsized, 125 Downsized Higher ripple current GPA P201 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 (10 to 250Vdc ) -25 to +125 (350 to 450Vdc) 10 to 450Vdc 20% (M) 10 to 100Vdc I=0.03CV or 4A, whichever is greater. (at 20, 120Hz) 160 to 450Vdc CV1,000 I=0.1CV+40 CV>1,000 I=0.04CV+100 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V tan (Max.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 0.20 0.24 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V Z(-25)/Z(+20) 3 2 2 2 2 2 2 2 3 6 Z(-40)/Z(+20) 6 4 4 4 4 4 4 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 125. 10 to 100Vdc 160 to 450Vdc Time 2,000hours 8 : 2,000hours10 : 3,000hours12.5 &16 : 5,000hours Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours (500 hours for 350 to 450Vdc) at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. 10 to 100Vdc 160 to 450Vdc Capacitance change 30% of the initial value 20% of the initial value D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E D' d Sleeve (PET : Orange) F0.5 Terminal D d F D' L' Vent 15min. 4min. (12.5 & 16) (8 & 10) L' 8 0.6 3.5 10 12.5 16 0.6 0.6 0.8 5.0 5.0 7.5 D+0.5max. L+2.0max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GXE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 10V:100,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 206 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long Life, Downsized, 125 GXESeries STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 80 Cap (F) is not solvent resistant. Rated ripple Impedance current Case size ( max./ (mArms/ DxL(mm) 20, 100kHz) 125, Note1) 220 330 470 1,000 2,200 3,300 4,700 100 220 330 470 1,000 2,200 3,300 100 220 330 470 1,000 2,200 100 100 220 330 470 1,000 10 22 33 47 100 220 330 470 1,000 33 47 100 220 330 470 1,000 22 33 8x12 10x12.5 10x12.5 10x20 12.5x25 16x25 16x31.5 8x12 10x12.5 10x12.5 10x16 12.5x20 16x25 16x31.5 8x12 10x12.5 10x16 10x20 12.5x25 16x31.5 8x12 10x12.5 10x16 10x20 12.5x20 16x25 8x12 8x12 8x12 8x12 10x12.5 10x20 12.5x20 12.5x25 16x31.5 8x12 10x12.5 10x16 12.5x20 12.5x25 12.5x30 16x31.5 8x12 10x12.5 0.32 0.15 0.15 0.075 0.040 0.031 0.025 0.32 0.15 0.15 0.094 0.058 0.031 0.025 0.32 0.15 0.094 0.075 0.040 0.025 0.32 0.15 0.094 0.075 0.058 0.031 0.75 0.50 0.50 0.50 0.20 0.098 0.081 0.059 0.032 1.5 0.59 0.41 0.16 0.12 0.097 0.059 1.5 0.80 340 620 620 950 1,350 1,620 1,860 340 620 620 790 1,080 1,620 1,860 340 620 790 950 1,350 1,860 340 620 790 950 1,080 1,620 180 250 280 280 520 880 990 1,150 1,590 150 530 690 1,050 1,290 1,460 1,850 150 480 WV (Vdc) Part No. EGXE100E221MH12D EGXE100E331MJC5S EGXE100E471MJC5S EGXE100E102MJ20S EGXE100E222MK25S EGXE100E332ML25S EGXE100E472MLN3S EGXE160E101MH12D EGXE160E221MJC5S EGXE160E331MJC5S EGXE160E471MJ16S EGXE160E102MK20S EGXE160E222ML25S EGXE160E332MLN3S EGXE250E101MH12D EGXE250E221MJC5S EGXE250E331MJ16S EGXE250E471MJ20S EGXE250E102MK25S EGXE250E222MLN3S EGXE350E101MH12D EGXE350E101MJC5S EGXE350E221MJ16S EGXE350E331MJ20S EGXE350E471MK20S EGXE350E102ML25S EGXE500E100MH12D EGXE500E220MH12D EGXE500E330MH12D EGXE500E470MH12D EGXE500E101MJC5S EGXE500E221MJ20S EGXE500E331MK20S EGXE500E471MK25S EGXE500E102MLN3S EGXE630E330MH12D EGXE630E470MJC5S EGXE630E101MJ16S EGXE630E221MK20S EGXE630E331MK25S EGXE630E471MK30S EGXE630E102MLN3S EGXE800E220MH12D EGXE800E330MJC5S 80 100 160 200 250 350 400 450 Cap (F) 47 100 220 330 470 4.7 10 22 33 47 100 220 330 22 33 47 68 100 150 10 22 33 47 68 100 10 22 33 47 68 4.7 10 22 33 47 4.7 10 22 33 47 4.7 10 22 33 Rated ripple Impedance current Case size ( max./ (mArms/ DxL(mm) 20, 100kHz) 125, Note1) 10x12.5 10x20 12.5x25 12.5x30 16x25 8x12 8x12 10x12.5 10x12.5 10x16 12.5x20 16x25 16x31.5 10x20 10x25 12.5x20 12.5x25 16x25 16x31.5 10x20 10x25 12.5x20 12.5x25 16x20 16x25 10x20 12.5x20 12.5x25 16x25 16x31.5 10x20 10x25 12.5x25 16x25 16x31.5 10x20 10x25 12.5x30 16x25 16x31.5 10x25 12.5x20 16x25 16x31.5 0.80 0.39 0.18 0.16 0.11 2.0 1.5 0.80 0.80 0.55 0.25 0.11 0.079 480 790 1,240 1,390 1,500 130 150 480 480 630 990 1,500 1,790 115 154 187 245 329 434 78 126 157 204 250 329 78 128 171 225 292 53 85 139 189 243 53 86 142 189 243 58 86 154 203 Part No. EGXE800E470MJC5S EGXE800E101MJ20S EGXE800E221MK25S EGXE800E331MK30S EGXE800E471ML25S EGXE101E4R7MH12D EGXE101E100MH12D EGXE101E220MJC5S EGXE101E330MJC5S EGXE101E470MJ16S EGXE101E101MK20S EGXE101E221ML25S EGXE101E331MLN3S EGXE161E220MJ20S EGXE161E330MJ25S EGXE161E470MK20S EGXE161E680MK25S EGXE161E101ML25S EGXE161E151MLN3S EGXE201E100MJ20S EGXE201E220MJ25S EGXE201E330MK20S EGXE201E470MK25S EGXE201E680ML20S EGXE201E101ML25S EGXE251E100MJ20S EGXE251E220MK20S EGXE251E330MK25S EGXE251E470ML25S EGXE251E680MLN3S EGXE351E4R7MJ20S EGXE351E100MJ25S EGXE351E220MK25S EGXE351E330ML25S EGXE351E470MLN3S EGXE401E4R7MJ20S EGXE401E100MJ25S EGXE401E220MK30S EGXE401E330ML25S EGXE401E470MLN3S EGXE451E4R7MJ25S EGXE451E100MK20S EGXE451E220ML25S EGXE451E330MLN3S : Enter the appropriate lead forming or taping code. (Note1) Ripple current frequency 10 to 100V = 100kHz 160 to 450V = 120Hz RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers (10 to 100Vdc) Capacitance(F) Frequency(Hz) 4.7 to 100 220 to 470 1,000 2,200 to 3,300 4,700 120 0.40 0.50 0.60 0.75 0.85 (160 to 450Vdc) 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Capacitance(F) Frequency(Hz) 4.7 to 33 47 to 150 50 0.75 0.80 120 1.00 1.00 300 1.25 1.15 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 207 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GXL Long life, 125 GXL Series Long-Life version of GXE series For automobile modules and other high temperature applications Endurance with ripple current : 5,000 hours at 125 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Longer life GXE P206 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125 10 to 50Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 10V 16V 25V 35V 50V tan (Max.) 0.20 0.16 0.14 0.12 0.10 (at 20, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V Z(-25)/Z(+20) 3 2 2 2 2 Z(-40)/Z(+20) 6 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Orange) F0.5 Terminal L' Vent 15min. 4min. (10) D d F D' L' 10 0.6 5.0 D+0.5max. L+1.5max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GX L AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 10V:100, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 208 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 125 GXLSeries STANDARD RATINGS Cap (F) WV (Vdc) Case size DxL(mm) 330 470 1,000 220 330 470 220 330 470 100 220 330 100 220 10 16 25 35 50 Impedance ( max./20, 100kHz) Rated ripple current (mArms/125, 100kHz) Part No. 0.17 0.17 0.094 0.17 0.17 0.12 0.17 0.12 0.094 0.17 0.12 0.094 0.30 0.19 800 800 1,300 800 800 1,050 800 1,050 1,300 800 1,050 1,300 590 970 EGXL100E331MJC5S EGXL100E471MJC5S EGXL100E102MJ20S EGXL160E221MJC5S EGXL160E331MJC5S EGXL160E471MJ16S EGXL250E221MJC5S EGXL250E331MJ16S EGXL250E471MJ20S EGXL350E101MJC5S EGXL350E221MJ16S EGXL350E331MJ20S EGXL500E101MJC5S EGXL500E221MJ20S 10x12.5 10x12.5 10x20 10x12.5 10x12.5 10x16 10x12.5 10x16 10x20 10x12.5 10x16 10x20 10x12.5 10x20 : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 100 220 to 470 1,000 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 209 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135 GPD Series Guaranteed short time at 150 Downsized and high-ripple current version of GPA series For automobile modules and other high temperature applications Endurance with ripple current : 2,000 to 3,000 hours at 125 to 135 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant GPA P201 Downsized Higher ripple current GPD SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +135 25 to 100Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tan (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 2 2 2 2 2 2 Z(-40)/Z(+20) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125 or 135. Time 125 3,000hours 135 25 to 50Vdc3,000hours 63 to 100Vdc2,000hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after the test condition that the rated voltage is applied for 100 hours at 150 and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125 or 135. Time 125 2,500hours 135 25 to 50Vdc2,500hours 63 to 100Vdc1,500hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life DIMENSIONS [mm] Code : E D' d Coated Case F0.5 Terminal 15min. L' Vent 4min. Gas escape end seal D d F D' L' 12.5 0.6 5.0 14.5 16 0.8 0.8 7.5 7.5 D+0.5max. L+1.5max. 18 0.8 7.5 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GPD AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470F:471, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 210 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135 GPDSeries STANDARD RATINGS WV (Vdc) 25 35 50 63 Cap (F) 2,000 2,700 3,000 3,300 3,600 3,900 4,300 4,700 4,700 5,100 5,100 5,600 5,600 6,200 6,800 7,500 7,500 9,100 10,000 12,000 1,300 1,600 1,800 2,000 2,200 2,400 2,400 2,700 3,000 3,000 3,300 3,300 3,600 3,900 4,300 4,300 4,700 5,600 6,200 7,500 620 750 820 1,000 1,100 1,100 1,300 1,300 1,300 1,500 1,600 1,600 1,600 1,800 2,200 2,200 2,400 2,700 3,000 3,600 390 560 560 680 750 750 910 910 Case size DxL(mm) 12.5 x 20 14.5 x 20 12.5 x 25 16 x 20 12.5 x 30 14.5 x 25 18 x 20 12.5 x 35 16 x 25 12.5 x 40 14.5 x 30 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 12.5 x 20 14.5 x 20 12.5 x 25 16 x 20 12.5 x 30 14.5 x 25 18 x 20 12.5 x 35 14.5 x 30 16 x 25 12.5 x 40 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 12.5 x 20 14.5 x 20 12.5 x 25 16 x 20 12.5 x 30 14.5 x 25 12.5 x 35 16 x 25 18 x 20 14.5 x 30 12.5 x 40 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 12.5 x 20 12.5 x 25 14.5 x 20 16 x 20 12.5 x 30 14.5 x 25 12.5 x 35 18 x 20 ESR ( max./100kHz) Rated ripple current (mArms/100kHz) 20 -40 125 135 0.042 0.038 0.033 0.035 0.028 0.030 0.034 0.025 0.028 0.024 0.025 0.023 0.023 0.027 0.022 0.020 0.022 0.019 0.019 0.018 0.042 0.038 0.033 0.035 0.028 0.030 0.034 0.025 0.025 0.028 0.024 0.023 0.023 0.027 0.022 0.020 0.022 0.019 0.019 0.018 0.073 0.063 0.058 0.050 0.048 0.048 0.042 0.042 0.042 0.038 0.037 0.035 0.035 0.033 0.029 0.029 0.028 0.025 0.024 0.023 0.072 0.052 0.061 0.053 0.042 0.047 0.035 0.044 0.48 0.37 0.30 0.27 0.24 0.28 0.22 0.21 0.22 0.19 0.24 0.20 0.18 0.19 0.16 0.14 0.16 0.12 0.12 0.10 0.48 0.37 0.30 0.27 0.24 0.28 0.22 0.21 0.24 0.22 0.19 0.20 0.18 0.19 0.16 0.14 0.16 0.12 0.12 0.10 0.88 0.73 0.67 0.55 0.52 0.52 0.44 0.44 0.44 0.39 0.36 0.36 0.36 0.32 0.27 0.27 0.25 0.22 0.20 0.16 0.56 0.39 0.40 0.34 0.30 0.30 0.25 0.26 2,760 2,990 3,480 3,040 4,490 4,120 3,250 5,140 4,260 5,810 4,880 5,420 5,480 4,500 6,240 6,070 5,600 6,810 6,280 7,070 2,760 2,990 3,480 3,040 4,490 4,120 3,250 5,140 4,880 4,260 5,810 5,420 5,480 4,500 6,240 6,070 5,600 6,810 6,280 7,070 2,400 2,760 3,350 2,960 4,220 3,750 4,810 4,040 3,130 4,590 5,240 5,060 5,130 4,230 5,630 5,480 5,240 5,930 5,870 6,420 1,640 2,520 1,790 2,140 3,110 2,650 3,760 2,350 1,690 1,830 2,010 1,860 2,900 2,780 1,870 3,190 2,870 3,470 3,150 3,360 3,400 2,900 3,730 3,630 3,470 3,930 3,750 4,080 1,690 1,830 2,010 1,860 2,900 2,780 1,870 3,190 3,150 2,870 3,470 3,360 3,400 2,900 3,730 3,630 3,470 3,930 3,750 4,080 1,470 1,590 2,260 1,870 2,520 2,420 2,780 2,500 2,110 2,740 3,020 2,920 2,960 2,530 3,250 3,160 3,020 3,420 3,390 3,700 1,420 2,050 1,550 1,910 2,630 2,160 2,970 2,100 Part No. EGPD250E202MK20H EGPD250E272MU20H EGPD250E302MK25H EGPD250E332ML20H EGPD250E362MK30H EGPD250E392MU25H EGPD250E432MM20H EGPD250E472MK35H EGPD250E472ML25H EGPD250E512MK40H EGPD250E512MU30H EGPD250E562MU35H EGPD250E562ML30H EGPD250E622MM25H EGPD250E682MU40H EGPD250E752ML35H EGPD250E752MM30H EGPD250E912ML40H EGPD250E103MM35H EGPD250E123MM40H EGPD350E132MK20H EGPD350E162MU20H EGPD350E182MK25H EGPD350E202ML20H EGPD350E222MK30H EGPD350E242MU25H EGPD350E242MM20H EGPD350E272MK35H EGPD350E302MU30H EGPD350E302ML25H EGPD350E332MK40H EGPD350E332MU35H EGPD350E362ML30H EGPD350E392MM25H EGPD350E432MU40H EGPD350E432ML35H EGPD350E472MM30H EGPD350E562ML40H EGPD350E622MM35H EGPD350E752MM40H EGPD500E621MK20H EGPD500E751MU20H EGPD500E821MK25H EGPD500E102ML20H EGPD500E112MK30H EGPD500E112MU25H EGPD500E132MK35H EGPD500E132ML25H EGPD500E132MM20H EGPD500E152MU30H EGPD500E162MK40H EGPD500E162MU35H EGPD500E162ML30H EGPD500E182MM25H EGPD500E222MU40H EGPD500E222ML35H EGPD500E242MM30H EGPD500E272ML40H EGPD500E302MM35H EGPD500E362MM40H EGPD630E391MK20H EGPD630E561MK25H EGPD630E561MU20H EGPD630E681ML20H EGPD630E751MK30H EGPD630E751MU25H EGPD630E911MK35H EGPD630E911MM20H : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 211 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135 GPDSeries STANDARD RATINGS WV (Vdc) 63 80 100 Cap (F) Case size DxL(mm) 1,000 1,000 1,100 1,200 1,200 1,300 1,500 1,600 1,600 1,800 2,200 2,400 270 360 390 470 510 510 620 620 680 680 750 750 750 820 1,000 1,000 1,100 1,300 1,300 1,600 160 200 220 270 300 300 360 360 390 390 430 430 470 510 560 560 620 750 820 910 14.5 x 30 16 x 25 12.5 x 40 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 12.5 x 20 14.5 x 20 12.5 x 25 16 x 20 12.5 x 30 14.5 x 25 12.5 x 35 18 x 20 14.5 x 30 16 x 25 12.5 x 40 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 12.5 x 20 14.5 x 20 12.5 x 25 16 x 20 12.5 x 30 14.5 x 25 12.5 x 35 18 x 20 14.5 x 30 16 x 25 12.5 x 40 14.5 x 35 16 x 30 18 x 25 14.5 x 40 16 x 35 18 x 30 16 x 40 18 x 35 18 x 40 ESR ( max./100kHz) Rated ripple current (mArms/100kHz) 20 -40 125 135 0.037 0.038 0.031 0.033 0.034 0.033 0.028 0.027 0.028 0.025 0.022 0.021 0.072 0.061 0.052 0.053 0.042 0.047 0.035 0.044 0.037 0.038 0.031 0.033 0.034 0.033 0.028 0.027 0.028 0.025 0.022 0.021 0.090 0.083 0.068 0.067 0.052 0.058 0.045 0.061 0.047 0.048 0.038 0.043 0.041 0.045 0.034 0.036 0.037 0.028 0.030 0.026 0.23 0.23 0.22 0.20 0.20 0.19 0.16 0.15 0.15 0.14 0.12 0.11 0.56 0.40 0.39 0.34 0.30 0.30 0.25 0.26 0.23 0.23 0.22 0.20 0.20 0.19 0.16 0.15 0.15 0.14 0.12 0.11 0.75 0.61 0.55 0.47 0.41 0.42 0.35 0.35 0.33 0.33 0.29 0.30 0.27 0.25 0.23 0.23 0.20 0.18 0.16 0.14 3,360 2,940 4,610 3,860 3,860 3,080 4,930 4,590 4,080 5,190 5,220 5,660 1,640 1,790 2,520 2,140 3,110 2,650 3,760 2,350 3,360 2,940 4,610 3,860 3,860 3,080 4,930 4,590 4,080 5,190 5,220 5,660 1,580 1,660 2,140 2,050 2,950 2,300 3,530 2,270 3,120 2,790 4,140 3,510 3,440 2,920 4,330 4,190 3,920 5,020 4,710 5,280 2,840 2,680 3,260 3,050 3,050 2,810 3,490 3,420 3,220 3,670 3,690 3,820 1,420 1,550 2,050 1,910 2,630 2,160 2,970 2,100 2,840 2,680 3,260 3,050 3,050 2,810 3,490 3,420 3,220 3,670 3,690 3,820 1,410 1,480 1,960 1,670 2,330 2,100 2,630 1,860 2,460 2,360 2,920 2,620 2,720 2,470 3,060 2,960 2,920 3,380 3,330 3,560 Part No. EGPD630E102MU30H EGPD630E102ML25H EGPD630E112MK40H EGPD630E122MU35H EGPD630E122ML30H EGPD630E132MM25H EGPD630E152MU40H EGPD630E162ML35H EGPD630E162MM30H EGPD630E182ML40H EGPD630E222MM35H EGPD630E242MM40H EGPD800E271MK20H EGPD800E361MU20H EGPD800E391MK25H EGPD800E471ML20H EGPD800E511MK30H EGPD800E511MU25H EGPD800E621MK35H EGPD800E621MM20H EGPD800E681MU30H EGPD800E681ML25H EGPD800E751MK40H EGPD800E751MU35H EGPD800E751ML30H EGPD800E821MM25H EGPD800E102MU40H EGPD800E102ML35H EGPD800E112MM30H EGPD800E132ML40H EGPD800E132MM35H EGPD800E162MM40H EGPD101E161MK20H EGPD101E201MU20H EGPD101E221MK25H EGPD101E271ML20H EGPD101E301MK30H EGPD101E301MU25H EGPD101E361MK35H EGPD101E361MM20H EGPD101E391MU30H EGPD101E391ML25H EGPD101E431MK40H EGPD101E431MU35H EGPD101E471ML30H EGPD101E511MM25H EGPD101E561MU40H EGPD101E561ML35H EGPD101E621MM30H EGPD101E751ML40H EGPD101E821MM35H EGPD101E911MM40H : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 160 220 680 2,200 4,700 to to to to to 200 620 2,000 4,300 12,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 212 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GVD Vibration resistant structure, 135 New! Series 2 Structure of higher vibration resistance by GPD series (acceleration 392m/s , 40G) High temperature resistance 100 hours at 150 Designed for electric power steering and ECU (include engine control, GPD direct fuel injection) etc. P210 Rated voltage range : 25 to 100V, Capacitance range : 510 to 8,200F Solvent resistant type RoHS Compliant Vibration resistance GVD SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life Vibration -40 to +135 25 to 100Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tan (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 2 2 2 2 2 2 Z(-40)/Z(+20) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125 or 135. Time 125 25 to 100Vdc3,000hours 135 25 to 50Vdc3,000hours 63 to 100Vdc2,000hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after the test condition that the rated voltage is applied for 100 hours at 150 and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125 or 135. Time 125 25 to 100Vdc2,500hours 135 25 to 50Vdc2,500hours 63 to 100Vdc1,500hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35). Capacitance change 5 of the initial value D.F. (tan) The initial specified value Leakage current The initial specified value Vibration profile Vibration frequency range Amplitude or Acceleration Sweep rate Direction and period of motion Fixation 10 to 2,000Hz 1.5mm peak to peak or 392m/s2(40G), whichever is the less severe 10 to 2,000 to 10Hz 0.5 octave/minute 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fix main body and Lead teminal using a fixture tool, please contact us for detail. DIMENSIONS [mm] F0.5 Code : E D' Coated Case d Terminal Vent L' 15min. 4min. Gas escape end seal * Please contact us about lead formings and mounting methods. D F F D' L' 18 0.8 7.5 D+0.5max. L+1.5max. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 213 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Vibration resistant structure, 135 GVDSeries New! PART NUMBERING SYSTEM 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18 E GVD AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680F:681, 8,200F:822) Lead forming*taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" STANDARD RATINGS Cap (F) WV (Vdc) 6,200 8,200 3,600 4,700 2,000 2,400 1,300 1,800 820 1,200 510 680 25 35 50 63 80 100 ESR (max/100kHz) Case size DxL(mm) 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 18x30 18x35.5 20 0.023 0.019 0.023 0.019 0.029 0.024 0.029 0.024 0.029 0.024 0.038 0.030 Rated ripple current (mArms/100kHz) -40 125 135 0.19 0.13 0.19 0.13 0.26 0.20 0.18 0.14 0.18 0.14 0.25 0.19 5,380 6,110 5,380 6,110 5,050 5,760 3,930 4,920 3,930 4,920 3,800 4,550 3,330 3,750 3,330 3,750 2,910 3,330 3,100 3,520 3,100 3,520 2,830 3,210 Part No. EGVD250E622MM30H EGVD250E822MMP1H EGVD350E362MM30H EGVD350E472MMP1H EGVD500E202MM30H EGVD500E242MMP1H EGVD630E132MM30H EGVD630E182MMP1H EGVD800E821MM30H EGVD800E122MMP1H EGVD101E511MM30H EGVD101E681MMP1H : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 510 680 to 2,000 2,400 to 3,600 4,700 to 8,200 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 214 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 135 GXH Series For automobile modules and other high temperature applications Endurance with ripple current : 1,500 to 2,000 hours at 135 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant GXE P206 Higher temperature GXH SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +135 10 to 50Vdc (at 20, 120Hz) 20% (M) I=0.03CV or 4A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute) Rated voltage (Vdc) 10V 16V 25V 35V 50V tan(Max.) 0.20 0.16 0.14 0.12 0.10 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V Z(-25)/Z(+20) 3 2 2 2 2 Z(-40)/Z(+20) 6 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 135. Time 10 : 1,500hours 12.5 &16 : 2,000hours Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 135 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] D' d Coated Case F0.5 Code : E F0.5 Terminal 15min. L' Vent 4min. (12.5 & 16) (10) D d F D' L' 10 12.5 16 0.6 0.6 0.8 5.0 5.0 7.5 D+0.5max. L+2.0max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GXH AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 1,000F:102) Lead forming*taping code Terminal code Voltage code (ex. 10V:100,35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 215 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 135 GXHSeries STANDARD RATINGS WV (Vdc) 10 16 25 35 50 Cap (F) Case size DxL(mm) Impedance ( max./20, 100kHz) Rated ripple current (mArms/135, 100kHz) 330 470 1,000 2,200 3,300 4,700 220 330 470 1,000 2,200 3,300 220 330 470 1,000 2,200 100 220 330 470 1,000 100 220 330 470 1,000 10 x12.5 10x12.5 10x 20 12.5x 25 16x 25 16x 31.5 10x 12.5 10 x12.5 10x 16 12.5x20 16x25 16x31.5 10x 12.5 10x 16 10x 20 12.5x25 16 x31.5 10x 12.5 10x 16 10x20 12.5x20 16x 25 10x12.5 10x20 12.5x20 12.5x25 16x 31.5 0.15 0.15 0.075 0.040 0.031 0.025 0.15 0.15 0.094 0.058 0.031 0.025 0.15 0.094 0.075 0.040 0.025 0.15 0.094 0.075 0.058 0.031 0.20 0.098 0.081 0.059 0.032 620 620 950 1,350 1,620 1,860 620 620 790 1,080 1,620 1,860 620 790 950 1,350 1,860 620 790 950 1,080 1,620 520 880 990 1,150 1,590 Part No. EGXH100E331MJC5H EGXH100E471MJC5H EGXH100E102MJ20H EGXH100E222MK25H EGXH100E332ML25H EGXH100E472MLN3H EGXH160E221MJC5H EGXH160E331MJC5H EGXH160E471MJ16H EGXH160E102MK20H EGXH160E222ML25H EGXH160E332MLN3H EGXH250E221MJC5H EGXH250E331MJ16H EGXH250E471MJ20H EGXH250E102MK25H EGXH250E222MLN3H EGXH350E101MJC5H EGXH350E221MJ16H EGXH350E331MJ20H EGXH350E471MK20H EGXH350E102ML25H EGXH500E101MJC5H EGXH500E221MJ20H EGXH500E331MK20H EGXH500E471MK25H EGXH500E102MLN3H : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 100 220 to 470 1,000 2,200 to 3,300 4,700 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 216 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LBK For airbag module, 105 New! Series Downsizing of LBG series. For airbag application and power supply application High capacitance, low ESR and good low temperature behavior Endurance with ripple current : 5,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant LBK Downsized LBG P219 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55 to +105 25 & 35Vdc 2,500 to 14,000F 0 to +30% (A) I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 25V 35V tan (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. Rated voltage (Vdc) 25V 35V Z(-55)/Z(+20) 3 3 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20, 120Hz) (at 20 after 2 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : E 18 D 16 d 0.8 0.8 7.5 7.5 F D' D+0.5max. L' L+1.5max. D' d Sleeve (PET : Dark blue) F0.5 Terminal L' Vent 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BK AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3,500F:352, 14,000F:143) Lead forming*taping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 217 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBKSeries New! STANDARD RATINGS Cap (F) WV (Vdc) 35 20 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31.5 16 x 35.5 18 x 31.5 16 x 40 18 x 35.5 18 x 40 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31.5 16 x 35.5 18 x 31.5 16 x 40 18 x 35.5 18 x 40 4,200 5,300 5,900 7,500 8,000 9,500 10,000 11,000 11,000 14,000 2,500 3,100 3,500 4,500 4,700 5,600 6,000 6,600 7,100 8,400 25 ESR ( max./100kHz) Case size DxL (mm) -40 0.033 0.029 0.024 0.022 0.021 0.019 0.019 0.017 0.017 0.015 0.033 0.029 0.024 0.022 0.021 0.019 0.019 0.017 0.017 0.015 0.095 0.082 0.073 0.063 0.052 0.046 0.045 0.040 0.040 0.035 0.095 0.082 0.073 0.063 0.052 0.046 0.045 0.040 0.040 0.035 Rated ripple current (mArms/105, 100kHz) 2,250 2,500 2,600 2,800 3,200 3,500 3,500 3,800 3,700 4,000 2,250 2,500 2,600 2,800 3,200 3,500 3,500 3,800 3,700 4,000 Part No. ELBK250E422AL20S ELBK250E532AM20S ELBK250E592AL25S ELBK250E752AM25S ELBK250E802ALN3S ELBK250E952ALP1S ELBK250E103AMN3S ELBK250E113AL40S ELBK250E113AMP1S ELBK250E143AM40S ELBK350E252AL20S ELBK350E312AM20S ELBK350E352AL25S ELBK350E452AM25S ELBK350E472ALN3S ELBK350E562ALP1S ELBK350E602AMN3S ELBK350E662AL40S ELBK350E712AMP1S ELBK350E842AM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 2,500 to 3,500 4,200 to 14,000 120 0.75 0.85 1k 0.90 0.95 10k 0.95 0.98 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 218 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBG Series For airbag application High capacitance, low impedance, and good low temperature behavior Endurance with ripple current : 5,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55 to +105 25 & 35Vdc 1,000 to 11,000F (at 20, 120Hz) 0 to +30% (A) (at 20, 120Hz) I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Rated voltage (Vdc) 25V 35V tan (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20, 120Hz) Rated voltage (Vdc) 25V 35V Z(-55)/Z(+20) 3 3 Impedance at -40and 20 100kHz in the STANDARD RATINGS (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E 18 D 12.5 14.5 16 d 0.6 0.8 0.8 0.8 F 5.0 7.5 7.5 7.5 D' D+0.5max. L' L+1.5max. D' d Sleeve (PET : Dark blue) F0.5 Terminal L' Vent 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BG AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1,000F:102, 11,000F:113) Lead forming*taping code Terminal code Voltage code (ex. 16V:160, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 219 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBGSeries STANDARD RATINGS Cap (F) Case size DxL(mm) Impedance ( max./100kHz) 20 -40 1,700 2,400 2,400 2,800 3,000 3,400 3,500 4,200 4,200 4,500 4,600 5,400 5,600 6,000 6,400 6,600 7,800 7,900 9,200 11,000 1,000 1,400 1,400 1,600 1,800 2,000 2,100 2,500 2,500 2,700 2,800 3,200 3,400 3,600 3,800 4,000 4,700 4,800 5,600 6,700 12.5 x 20 12.5 x 25 14.5 x 20 12.5 x 30 16 x 20 14.5 x 25 12.5 x 35 16 x 25 18 x 20 12.5 x 40 14.5 x 31.5 14.5 x 35.5 16 x 31.5 18 x 25 14.5 x 40 16 x 35.5 16 x 40 18 x 31.5 18 x 35.5 18 x 40 12.5 x 20 12.5 x 25 14.5 x 20 12.5 x 30 16 x 20 14.5 x 25 12.5 x 35 16 x 25 18 x 20 12.5 x 40 14.5 x 31.5 14.5 x 35.5 16 x 31.5 18 x 25 14.5 x 40 16 x 35.5 16 x 40 18 x 31.5 18 x 35.5 18 x 40 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 WV (Vdc) 25 35 Rated ripple current (mArms/105, 100kHz) 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 Part No. ELBG250E 172AK20S ELBG250E 242AK25S ELBG250E 242AU20S ELBG250E 282AK30S ELBG250E 302AL20S ELBG250E 342AU25S ELBG250E 352AK35S ELBG250E 422AL25S ELBG250E 422AM20S ELBG250E 452AK40S ELBG250E 462AUN3S ELBG250E 542AUP1S ELBG250E 562ALN3S ELBG250E 602AM25S ELBG250E 642AU40S ELBG250E 662ALP1S ELBG250E 782AL40S ELBG250E 792AMN3S ELBG250E 922AMP1S ELBG250E 113AM40S ELBG350E 102AK20S ELBG350E 142AK25S ELBG350E 142AU20S ELBG350E 162AK30S ELBG350E 182AL20S ELBG350E 202AU25S ELBG350E 212AK35S ELBG350E 252AL25S ELBG350E 252AM20S ELBG350E 272AK40S ELBG350E 282AUN3S ELBG350E 322AUP1S ELBG350E 342ALN3S ELBG350E 362AM25S ELBG350E 382AU40S ELBG350E 402ALP1S ELBG350E 472AL40S ELBG350E 482AMN3S ELBG350E 562AMP1S ELBG350E 672AM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 1,000 to 2,000 2,100 to 3,800 4,000 to 11,000 120 0.60 0.75 0.85 1k 0.87 0.90 0.95 10k 0.95 0.95 0.98 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 220 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PH Series RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -20 to +65 300, 315, 330Vdc -10 to +20% (V) I=1xC Where, I : Max. leakage current (A), C : Nominal capacitance (F) 0.06max. Dissipation Factor (tan) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after charge and discharge are repeated 5,000 times at room temperature (5 to 35). Discharge resistance or Xenon tube : 0.7 to 1.0. Capacitance change 10% of the initial value D.F. (tan) 150% of the initial specified value Leakage current 150% of the initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 65 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 10% of the initial value D.F. (tan) 150% of the initial specified value Leakage current 150% of the initial specified value Charge and Discharge Characteristics Shelf Life DIMENSIONS [mm] Code : E D 6.0 to 7.5 8.0 to 8.5 9.0 to 9.5 10.0 to 14.0 14.5 to 18.0 0.6 0.6 0.5 0.6 0.8 d 5 4 F 2.5 3.5 7.5 D' D+0.5max. L' L+1.0max. D' d Sleeve (PET : Black) F0.5 Terminal L' Vent 15min. 4min. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E P H - A A A E A A A A A MA A A S Size Code D code (14th, 15th) Supplement code Size code (L code) Size code (D code) Nominal capacitance code (ex. 50F:500,100F:101) Lead forming*taping code Terminal code Rated voltage code (ex. 315V:3B1,330V:331) Series code Category Please refer to "Product code guide (radial lead type)" D(mm) 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 D code 14th 15th 0 6 5 6 0 7 5 7 0 8 5 8 0 9 5 9 0 A 5 A 0 B 5 B 0 C 5 C 0 D 5 D 0 E 5 E 0 F 5 F 0 G 5 G 0 H 5 H 0 J L code (16th, 17th) L(mm) 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 L code 16th 17th 5 1 6 1 7 1 8 1 9 1 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 2 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 3 0 4 1 4 2 4 3 4 4 4 5 4 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 221 CAT. No. E1001O Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PHSeries RATINGS (REFERENCE) Cap (F) WV (Vdc) Case size DxL(mm) 86 122 144 209 80 114 137 194 315 330 tan 10x 30 10x 40 12.5x 30 12.5x 40 10x 30 10x 40 12.5x 30 12.5x 40 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Part No. EPH-3B1E 860A030S EPH-3B1E 121A040S EPH-3B1E 1E1C530S EPH-3B1E 211C540S EPH-331E 800A030S EPH-331E 1B1A040S EPH-331E 1D1C530S EPH-331E 1K1C540S : Enter the appropriate lead forming or taping code. Products of vents on the sealing rubber DIMENSIONS[mm] <In the case of diameter 10mm> Lead Wire Vent f V F D 10 V (4.6) f (1.8) F 50.5 Products of vent on rubber type, please make clearance about 1mm minimum between rubber and board. If it is difficult to make clearance 1mm minimum between rubber and board, please arrange gas escaping hole on the board (same position and 40% minimum diameter from the vent). The products of dual vents on rubber, requires placement one or two gas escaping hole on the board. Products of a vent on the case Please make the following open space over the vent so that the vent can operate correctly. Case diameter 6 to 16mm 16.5mm and up Clearance 2mm minimum 3mm minimum Above part numbers are only reference. Please consult with us about detail specifications (rated voltage, capacitance, case size, type of rubber, etc...). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 222 CAT. No. E1001O Return Group Chart Snap-in Aluminum Electrolytic Capacitors (Large Capacitors) 223 Return Group Chart PART NUMBERING SYSTEM Product code guide (Snap-in type) (Example : KMM series, 400V-220F,30x30L) Please refer to the following table For more details, refer to Product Guide (P15). Contents Code Series Code Type Code Tol.(%) Code Polar E KMM KMM Snap-in VS 20 M Snap-in VN PET Flat terminal for PCB LI Pb-free PVC 3 4 5 6 7 LR Horizontal LC Straight VR 1 2 E KMM 4 0 1 V S Category Series code Voltage code Terminal code Voltage(V) Code 8 For Connector 9 Sleeve material Terminal plating Code material 10 11 12 13 14 15 16 17 18 N 2 2 1 M R 30 S Dummy terminal code Terminal # Code Capacitance code Capacitance tolerance S Sn M Size code Supplement code D(mm) Code L(mm) Code Cap.(F) Code 6.3 6R3 0 N 39 390 20 N 15 15 10 100 1 S 47 470 22 P 20 20 25 250 2 D 100 101 25.4 Q 25 25 100 101 3 T 470 471 30 R 30 30 250 251 1,000 102 35 A 35 35 315 3B1 4,700 472 40 B 40 40 10,000 103 45 45 50 50 55 55 60 60 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 224 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMR Series Downsized snap-ins, 85 SMR Endurance with ripple current : 2,000 hours at 85 Downsized and high ripple current from SMQ series Non solvent resistant type RoHS Compliant Downsized Higher ripple SMQ P227 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 400 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 400V 420 & 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 400 to 450V Z(-25)/Z(+20) 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D. F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D. F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Black) Terminal 4.00.5 L2.5 Negative mark PC board pin-out 2-1.2x6 D+1max. D+1max. 10 2-2 Vent Code : LI (35) Sleeve (PET : Black) PC board pin-out Negative mark 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MR A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180F:181, 1,000F:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 225 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85 SMRSeries STANDARD RATINGS WV (Vdc) 400 420 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 85, 120Hz) 150 180 220 220 270 270 330 330 330 390 390 390 390 470 470 470 560 560 680 680 820 1,000 120 180 180 220 220 270 270 270 330 330 330 22 x25 22 x30 22 x35 25.4 x25 22 x40 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x30 30 x40 35 x30 30 x45 35 x35 35 x45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.30 1.49 1.69 1.65 1.90 1.88 2.15 2.16 2.10 2.40 2.40 2.32 2.05 2.69 2.60 2.28 2.92 2.48 3.30 2.79 3.25 3.66 1.15 1.48 1.51 1.68 1.71 1.94 1.99 1.87 2.20 2.24 2.08 WV (Vdc) Part No. ESMR401VSN151MP25S ESMR401VSN181MP30S ESMR401VSN221MP35S ESMR401VSN221MQ25S ESMR401VSN271MP40S ESMR401VSN271MQ30S ESMR401VSN331MP45S ESMR401VSN331MQ35S ESMR401VSN331MR25S ESMR401VSN391MP50S ESMR401VSN391MQ40S ESMR401VSN391MR30S ESMR401VSN391MA25S ESMR401VSN471MQ45S ESMR401VSN471MR35S ESMR401VSN471MA30S ESMR401VSN561MR40S ESMR401VSN561MA30S ESMR401VSN681MR45S ESMR401VSN681MA35S ESMR401VSN821MA45S ESMR401VSN102MA50S ESMR421VSN121MP25S ESMR421VSN181MP30S ESMR421VSN181MQ25S ESMR421VSN221MP35S ESMR421VSN221MQ30S ESMR421VSN271MP45S ESMR421VSN271MQ35S ESMR421VSN271MR25S ESMR421VSN331MP50S ESMR421VSN331MQ40S ESMR421VSN331MR30S 420 450 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 85, 120Hz) 330 390 390 470 470 470 560 560 680 680 820 120 150 180 180 220 220 220 270 270 330 330 330 390 390 390 470 470 560 560 680 820 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 25.4 x 40 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.99 2.47 2.32 2.77 2.61 2.41 2.93 2.67 3.28 3.11 3.43 1.12 1.32 1.49 1.42 1.67 1.66 1.68 1.88 1.87 2.11 2.10 2.10 2.37 2.32 2.32 2.66 2.54 2.93 2.87 3.21 3.60 Part No. ESMR421VSN331MA25S ESMR421VSN391MQ45S ESMR421VSN391MR35S ESMR421VSN471MQ50S ESMR421VSN471MR40S ESMR421VSN471MA30S ESMR421VSN561MR45S ESMR421VSN561MA35S ESMR421VSN681MR50S ESMR421VSN681MA40S ESMR421VSN821MA45S ESMR451VSN121MP25S ESMR451VSN151MP30S ESMR451VSN181MP35S ESMR451VSN181MQ25S ESMR451VSN221MP40S ESMR451VSN221MQ30S ESMR451VSN221MR25S ESMR451VSN271MP45S ESMR451VSN271MQ35S ESMR451VSN331MQ40S ESMR451VSN331MR30S ESMR451VSN331MA25S ESMR451VSN391MQ50S ESMR451VSN391MR35S ESMR451VSN391MA30S ESMR451VSN471MR40S ESMR451VSN471MA35S ESMR451VSN561MR45S ESMR451VSN561MA40S ESMR451VSN681MA45S ESMR451VSN821MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 400 to 450Vdc 50 0.77 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 226 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMQ Downsized snap-ins, 85 SMR P225 Series Downsized Endurance with ripple current : 2,000 hours at 85 Non solvent resistant type RoHS Compliant SMQ SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V tan (Max.) 0.15 0.15 0.20 Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V Z(-25)/Z(+20) 4 8 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D. F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D. F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Black) Terminal Vent Negative mark PC board pin-out 2-1.2x6 D+1max. D+1max. 10 2-2 4.00.5 L2 Code : LI (35) Sleeve (PET : Black) PC board pin-out Negative mark 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MQ A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 82F:820, 3,300F:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 227 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85 SMQSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) 560 680 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 3,300 3,900 470 560 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 3,300 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 22 x25 22 x30 22 x35 22 x40 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x30 30 x40 35 x35 35 x40 35 x45 35 x50 22x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x30 25.4 x50 30 x40 35 x30 30 x45 35 x40 35 x45 35 x50 22x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x40 25.4 x30 30 x25 22 x45 25.4 x35 30 x30 35 x25 25.4 x40 30 x30 35 x30 25.4 x50 30 x35 35 x30 30 x45 35 x35 30 x50 35 x40 35 x50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.25 2.50 2.75 3.00 3.00 3.25 3.25 3.25 3.73 3.73 3.73 3.73 4.20 4.20 4.20 4.78 4.78 5.45 5.75 6.00 2.08 2.25 2.50 2.50 2.75 2.75 3.00 3.00 3.00 3.31 3.31 3.31 3.31 3.83 3.83 3.83 4.32 4.32 4.32 4.92 4.92 5.52 5.75 1.68 1.85 2.43 2.43 2.68 2.68 2.93 2.93 2.93 3.25 3.25 3.25 3.25 3.50 3.50 3.50 3.87 3.87 3.87 4.32 4.32 4.92 4.92 5.45 WV (Vdc) Part No. ESMQ161VSN561MP25S ESMQ161VSN681MP30S ESMQ161VSN821MP35S ESMQ161VSN102MP40S ESMQ161VSN102MQ30S ESMQ161VSN122MP45S ESMQ161VSN122MQ35S ESMQ161VSN122MR25S ESMQ161VSN152MP50S ESMQ161VSN152MQ40S ESMQ161VSN152MR30S ESMQ161VSN152MA25S ESMQ161VSN182MQ45S ESMQ161VSN182MR35S ESMQ161VSN182MA30S ESMQ161VSN222MR40S ESMQ161VSN222MA35S ESMQ161VSN272MA40S ESMQ161VSN332MA45S ESMQ161VSN392MA50S ESMQ181VSN471MP25S ESMQ181VSN561MP30S ESMQ181VSN681MP30S ESMQ181VSN681MQ25S ESMQ181VSN821MP35S ESMQ181VSN821MQ30S ESMQ181VSN102MP45S ESMQ181VSN102MQ35S ESMQ181VSN102MR25S ESMQ181VSN122MP50S ESMQ181VSN122MQ40S ESMQ181VSN122MR30S ESMQ181VSN122MA25S ESMQ181VSN152MQ45S ESMQ181VSN152MR35S ESMQ181VSN152MA30S ESMQ181VSN182MQ50S ESMQ181VSN182MR40S ESMQ181VSN182MA30S ESMQ181VSN222MR45S ESMQ181VSN222MA40S ESMQ181VSN272MA45S ESMQ181VSN332MA50S ESMQ201VSN391MP25S ESMQ201VSN471MP30S ESMQ201VSN561MP30S ESMQ201VSN561MQ25S ESMQ201VSN681MP35S ESMQ201VSN681MQ30S ESMQ201VSN821MP40S ESMQ201VSN821MQ30S ESMQ201VSN821MR25S ESMQ201VSN102MP45S ESMQ201VSN102MQ35S ESMQ201VSN102MR30S ESMQ201VSN102MA25S ESMQ201VSN122MQ40S ESMQ201VSN122MR30S ESMQ201VSN122MA30S ESMQ201VSN152MQ50S ESMQ201VSN152MR35S ESMQ201VSN152MA30S ESMQ201VSN182MR45S ESMQ201VSN182MA35S ESMQ201VSN222MR50S ESMQ201VSN222MA40S ESMQ201VSN272MA50S 250 315 350 Cap (F) 270 330 390 390 470 470 560 560 560 680 680 680 820 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 180 220 270 330 330 330 390 390 390 470 470 470 470 560 560 560 680 680 820 820 1,000 1,000 150 180 220 270 270 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 22 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 30 x 50 35 x 45 22 x 25 22 x 30 22 x 35 22 x 40 25.4 x 30 22 x 45 25.4 x 35 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.31 1.75 1.91 1.91 2.11 2.11 2.25 2.25 2.25 2.50 2.50 2.50 2.77 2.77 2.77 2.77 3.32 3.32 3.32 3.53 3.53 4.04 4.04 4.55 1.21 1.41 1.60 1.82 1.82 1.82 2.01 2.01 2.01 2.27 2.27 2.27 2.27 2.56 2.56 2.56 2.87 2.87 3.25 3.25 3.63 3.63 1.12 1.22 1.44 1.66 1.66 1.88 1.88 2.06 2.06 2.06 2.06 2.40 2.40 2.40 2.60 2.60 2.60 2.96 2.96 3.25 3.25 Part No. ESMQ251VSN271MP25S ESMQ251VSN331MP30S ESMQ251VSN391MP30S ESMQ251VSN391MQ25S ESMQ251VSN471MP35S ESMQ251VSN471MQ30S ESMQ251VSN561MP40S ESMQ251VSN561MQ30S ESMQ251VSN561MR25S ESMQ251VSN681MP45S ESMQ251VSN681MQ35S ESMQ251VSN681MR30S ESMQ251VSN821MP50S ESMQ251VSN821MQ40S ESMQ251VSN821MR30S ESMQ251VSN821MA25S ESMQ251VSN102MQ45S ESMQ251VSN102MR35S ESMQ251VSN102MA30S ESMQ251VSN122MR40S ESMQ251VSN122MA35S ESMQ251VSN152MR50S ESMQ251VSN152MA40S ESMQ251VSN182MA45S ESMQ3B1VSN181MP25S ESMQ3B1VSN221MP30S ESMQ3B1VSN271MP30S ESMQ3B1VSN331MP40S ESMQ3B1VSN331MQ30S ESMQ3B1VSN331MR25S ESMQ3B1VSN391MP45S ESMQ3B1VSN391MQ35S ESMQ3B1VSN391MR30S ESMQ3B1VSN471MP50S ESMQ3B1VSN471MQ40S ESMQ3B1VSN471MR30S ESMQ3B1VSN471MA25S ESMQ3B1VSN561MQ45S ESMQ3B1VSN561MR35S ESMQ3B1VSN561MA30S ESMQ3B1VSN681MR40S ESMQ3B1VSN681MA35S ESMQ3B1VSN821MR45S ESMQ3B1VSN821MA40S ESMQ3B1VSN102MR50S ESMQ3B1VSN102MA45S ESMQ351VSN151MP25S ESMQ351VSN181MP30S ESMQ351VSN221MP35S ESMQ351VSN271MP40S ESMQ351VSN271MQ30S ESMQ351VSN331MP45S ESMQ351VSN331MQ35S ESMQ351VSN391MP50S ESMQ351VSN391MQ40S ESMQ351VSN391MR30S ESMQ351VSN391MA25S ESMQ351VSN471MQ45S ESMQ351VSN471MR35S ESMQ351VSN471MA30S ESMQ351VSN561MQ50S ESMQ351VSN561MR40S ESMQ351VSN561MA30S ESMQ351VSN681MR45S ESMQ351VSN681MA35S ESMQ351VSN821MR50S ESMQ351VSN821MA45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 228 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85 SMQSeries STANDARD RATINGS WV (Vdc) Cap (F) 350 1,000 120 150 180 220 220 270 270 270 330 330 330 330 390 390 390 470 470 470 560 560 680 680 820 100 120 150 150 180 180 220 220 220 270 270 400 420 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 35 x50 22 x25 22 x30 22 x35 22 x40 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22x 25 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 35 30 x 25 22 x 50 25.4 x 35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.54 1.02 1.16 1.44 1.49 1.49 1.67 1.67 1.67 1.90 1.90 1.90 1.90 2.13 2.13 2.13 2.39 2.39 2.39 2.69 2.69 2.96 2.96 3.25 0.97 1.08 1.30 1.30 1.48 1.48 1.65 1.65 1.65 1.94 1.94 WV (Vdc) Part No. ESMQ351VSN102MA50S ESMQ401VSN121MP25S ESMQ401VSN151MP30S ESMQ401VSN181MP35S ESMQ401VSN221MP40S ESMQ401VSN221MQ30S ESMQ401VSN271MP45S ESMQ401VSN271MQ35S ESMQ401VSN271MR25S ESMQ401VSN331MP50S ESMQ401VSN331MQ40S ESMQ401VSN331MR30S ESMQ401VSN331MA25S ESMQ401VSN391MQ45S ESMQ401VSN391MR35S ESMQ401VSN391MA30S ESMQ401VSN471MQ50S ESMQ401VSN471MR40S ESMQ401VSN471MA30S ESMQ401VSN561MR45S ESMQ401VSN561MA35S ESMQ401VSN681MR50S ESMQ401VSN681MA40S ESMQ401VSN821MA45S ESMQ421VSN101MP25S ESMQ421VSN121MP25S ESMQ421VSN151MP30S ESMQ421VSN151MQ25S ESMQ421VSN181MP35S ESMQ421VSN181MQ30S ESMQ421VSN221MP40S ESMQ421VSN221MQ35S ESMQ421VSN221MR25S ESMQ421VSN271MP50S ESMQ421VSN271MQ35S 420 450 Cap (F) 270 330 330 330 390 390 390 470 470 560 560 680 82 100 120 150 150 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 560 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 30 x 30 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 40 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 50 30 x 40 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 30 x 50 35 x 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.94 2.17 2.17 2.17 2.27 2.27 2.27 2.61 2.61 2.82 2.82 3.11 0.83 0.93 1.04 1.19 1.19 1.35 1.35 1.55 1.55 1.55 1.55 1.78 1.78 1.78 2.01 2.01 2.01 2.24 2.24 2.53 2.53 2.82 2.82 Part No. ESMQ421VSN271MR30S ESMQ421VSN331MQ45S ESMQ421VSN331MR35S ESMQ421VSN331MA30S ESMQ421VSN391MQ50S ESMQ421VSN391MR35S ESMQ421VSN391MA30S ESMQ421VSN471MR40S ESMQ421VSN471MA35S ESMQ421VSN561MR50S ESMQ421VSN561MA40S ESMQ421VSN681MA45S ESMQ451VSN820MP25S ESMQ451VSN101MP25S ESMQ451VSN121MP30S ESMQ451VSN151MP35S ESMQ451VSN151MQ25S ESMQ451VSN181MP40S ESMQ451VSN181MQ30S ESMQ451VSN221MP45S ESMQ451VSN221MQ40S ESMQ451VSN221MR30S ESMQ451VSN221MA25S ESMQ451VSN271MP50S ESMQ451VSN271MQ40S ESMQ451VSN271MR30S ESMQ451VSN331MQ50S ESMQ451VSN331MR40S ESMQ451VSN331MA30S ESMQ451VSN391MR40S ESMQ451VSN391MA35S ESMQ451VSN471MR45S ESMQ451VSN471MA40S ESMQ451VSN561MR50S ESMQ451VSN561MA45S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 229 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMW Downsized snap-ins, 105 KMW Series Downsized from KMR series Endurance with ripple current : 2,000 hours at 105 Rated voltage range : 400 to 450Vdc, Capacitance range : 120 to 1,000F Non solvent resistant type RoHS Compliant Downsized KMR P232 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 400V 420 & 450V tan(Max.) 0.15 0.20 Rated voltage (Vdc) 400 to 450V Z(-25)/Z(+20) 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 2-2 4.00.5 L2.5 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E K MW 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180F:181, 1,000F:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 230 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMWSeries STANDARD RATINGS WV (Vdc) 400 420 Cap (F) 150 180 220 220 270 330 330 330 390 390 390 390 470 470 560 560 680 680 680 820 1,000 120 150 180 220 270 270 270 330 330 330 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22 x25 22 x30 22 x35 25.4 x25 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 30 x40 35 x30 30 x45 30 x50 35 x35 35 x40 35 x50 22x25 22 x30 25.4 x25 25.4 x30 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.91 1.04 1.18 1.15 1.31 1.50 1.51 1.46 1.67 1.67 1.61 1.40 1.87 1.81 2.03 1.70 2.29 2.33 1.90 2.16 2.50 0.78 0.91 1.02 1.16 1.30 1.34 1.28 1.47 1.51 1.43 WV (Vdc) Part No. EKMW401VSN151MP25S EKMW401VSN181MP30S EKMW401VSN221MP35S EKMW401VSN221MQ25S EKMW401VSN271MQ30S EKMW401VSN331MP45S EKMW401VSN331MQ35S EKMW401VSN331MR25S EKMW401VSN391MP50S EKMW401VSN391MQ40S EKMW401VSN391MR30S EKMW401VSN391MA25S EKMW401VSN471MQ45S EKMW401VSN471MR35S EKMW401VSN561MR40S EKMW401VSN561MA30S EKMW401VSN681MR45S EKMW401VSN681MR50S EKMW401VSN681MA35S EKMW401VSN821MA40S EKMW401VSN102MA50S EKMW421VSN121MP25S EKMW421VSN151MP30S EKMW421VSN181MQ25S EKMW421VSN221MQ30S EKMW421VSN271MP45S EKMW421VSN271MQ35S EKMW421VSN271MR25S EKMW421VSN331MP50S EKMW421VSN331MQ40S EKMW421VSN331MR30S 420 450 Cap (F) 330 390 390 390 470 470 560 560 680 120 150 150 180 180 220 220 220 270 270 270 330 330 390 390 390 470 470 560 560 680 820 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 25 25.4 x 45 25.4 x 50 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.38 1.67 1.70 1.59 1.79 1.67 2.01 1.85 2.11 0.78 0.91 0.93 1.02 1.05 1.15 1.21 1.15 1.36 1.36 1.29 1.54 1.46 1.70 1.63 1.52 1.85 1.77 2.04 2.02 2.16 2.42 Part No. EKMW421VSN331MA25S EKMW421VSN391MQ45S EKMW421VSN391MQ50S EKMW421VSN391MR35S EKMW421VSN471MR40S EKMW421VSN471MA30S EKMW421VSN561MR45S EKMW421VSN561MA35S EKMW421VSN681MA40S EKMW451VSN121MP25S EKMW451VSN151MP30S EKMW451VSN151MQ25S EKMW451VSN181MP35S EKMW451VSN181MQ30S EKMW451VSN221MP40S EKMW451VSN221MQ35S EKMW451VSN221MR25S EKMW451VSN271MP50S EKMW451VSN271MQ40S EKMW451VSN271MR30S EKMW451VSN331MQ45S EKMW451VSN331MR35S EKMW451VSN391MQ50S EKMW451VSN391MR40S EKMW451VSN391MA30S EKMW451VSN471MR45S EKMW451VSN471MA35S EKMW451VSN561MR50S EKMW451VSN561MA40S EKMW451VSN681MA45S EKMW451VSN821MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 400 to 450Vdc 50 0.77 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 231 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMR Series Downsized snap-ins, 105 KMR Downsized 5mm in height from current snap-ins KMQ series Max. 50% up ripple current than same case size of KMQ series Endurance with ripple current : 2,000 hours at 105 Rated voltage range : 160 to 450Vdc, Capacitance range : 100 to 3,300F For inverter control, switching power supplies Non solvent resistant type RoHS Compliant Downsized KMQ P235 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V tan(Max.) 0.15 0.15 0.20 Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V Z(-25)/Z(+20) 4 8 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 2-2 4.00.5 L2.5 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E KMR 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 2,700F:272) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 232 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMRSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 1,800 2,200 2,200 2,700 2,700 3,300 470 560 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,200 2,700 560 560 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 Case size Rated ripple current DxL(mm) (Arms/105,120Hz) 22x 25 22 x 30 22 x 35 25.4 x 25 22x 40 25.4x 30 30x 25 22x 45 22x 50 25.4x 35 25.4x 40 25.4x 45 30x 30 35x 25 25.4x 50 30x 35 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 22x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22x 45 25.4x 35 30x 25 22x 50 25.4x 40 30x 30 35x 25 25.4x 45 25.4x 50 30x 35 30x 40 35x 30 30x 45 30x 50 35x 35 35x 40 35x 45 22x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 35 30 x 25 22x 50 25.4x 40 30x 30 25.4x 45 30x 35 35x 25 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 1.58 1.83 2.06 1.89 2.33 2.15 1.90 2.61 2.69 2.45 2.82 2.88 2.39 2.17 3.22 2.73 2.82 2.47 3.23 2.79 3.66 3.23 3.68 1.45 1.66 1.87 1.72 2.11 1.94 2.38 2.24 1.90 2.69 2.52 2.14 1.94 2.88 2.94 2.49 2.82 2.47 3.23 3.31 2.79 2.92 3.33 1.66 1.56 1.87 1.77 2.11 2.03 1.72 2.45 2.30 1.95 2.58 2.23 1.94 2.94 2.58 2.25 2.92 2.53 3.31 2.92 3.33 Part No. EKMR161VSN561MP25S EKMR161VSN681MP30S EKMR161VSN821MP35S EKMR161VSN821MQ25S EKMR161VSN102MP40S EKMR161VSN102MQ30S EKMR161VSN102MR25S EKMR161VSN122MP45S EKMR161VSN122MP50S EKMR161VSN122MQ35S EKMR161VSN152MQ40S EKMR161VSN152MQ45S EKMR161VSN152MR30S EKMR161VSN152MA25S EKMR161VSN182MQ50S EKMR161VSN182MR35S EKMR161VSN182MR40S EKMR161VSN182MA30S EKMR161VSN222MR45S EKMR161VSN222MA35S EKMR161VSN272MR50S EKMR161VSN272MA40S EKMR161VSN332MA45S EKMR181VSN471MP25S EKMR181VSN561MP30S EKMR181VSN681MP35S EKMR181VSN681MQ25S EKMR181VSN821MP40S EKMR181VSN821MQ30S EKMR181VSN102MP45S EKMR181VSN102MQ35S EKMR181VSN102MR25S EKMR181VSN122MP50S EKMR181VSN122MQ40S EKMR181VSN122MR30S EKMR181VSN122MA25S EKMR181VSN152MQ45S EKMR181VSN152MQ50S EKMR181VSN152MR35S EKMR181VSN182MR40S EKMR181VSN182MA30S EKMR181VSN222MR45S EKMR181VSN222MR50S EKMR181VSN222MA35S EKMR181VSN222MA40S EKMR181VSN272MA45S EKMR201VSN561MP30S EKMR201VSN561MQ25S EKMR201VSN681MP35S EKMR201VSN681MQ30S EKMR201VSN821MP40S EKMR201VSN821MQ35S EKMR201VSN821MR25S EKMR201VSN102MP50S EKMR201VSN102MQ40S EKMR201VSN102MR30S EKMR201VSN122MQ45S EKMR201VSN122MR35S EKMR201VSN122MA25S EKMR201VSN152MQ50S EKMR201VSN152MR40S EKMR201VSN152MA30S EKMR201VSN182MR45S EKMR201VSN182MA35S EKMR201VSN222MR50S EKMR201VSN222MA40S EKMR201VSN272MA45S WV (Vdc) 250 315 350 Cap (F) 330 390 470 560 560 560 680 680 820 820 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 2,200 180 220 270 270 330 330 390 390 390 470 470 470 470 560 560 680 680 680 820 820 1,000 1,000 1,200 1,200 150 220 220 270 270 330 330 330 330 390 390 390 390 470 560 560 560 560 680 680 820 Case size Rated ripple current DxL(mm) (Arms/105,120Hz) 22 x 25 22 x 30 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 25.4 x 40 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 1.21 1.38 1.56 1.74 1.61 1.42 1.97 1.85 2.08 2.13 1.77 1.60 2.40 2.03 2.31 2.38 2.06 2.73 2.41 2.72 3.10 0.91 1.06 1.20 1.15 1.37 1.30 1.52 1.48 1.39 1.72 1.67 1.57 1.52 1.86 1.78 2.10 2.03 1.90 2.31 2.13 2.61 2.46 2.78 2.86 0.84 1.06 1.04 1.20 1.18 1.37 1.40 1.36 1.28 1.56 1.52 1.43 1.38 1.71 1.90 1.78 1.84 1.72 2.10 1.94 2.36 Part No. EKMR251VSN331MP25S EKMR251VSN391MP30S EKMR251VSN471MP35S EKMR251VSN561MP40S EKMR251VSN561MQ30S EKMR251VSN561MR25S EKMR251VSN681MP45S EKMR251VSN681MQ35S EKMR251VSN821MQ40S EKMR251VSN821MQ45S EKMR251VSN821MR30S EKMR251VSN821MA25S EKMR251VSN102MQ50S EKMR251VSN102MR35S EKMR251VSN122MR40S EKMR251VSN122MR45S EKMR251VSN122MA35S EKMR251VSN152MR50S EKMR251VSN152MA40S EKMR251VSN182MA45S EKMR251VSN222MA50S EKMR3B1VSN181MP25S EKMR3B1VSN221MP30S EKMR3B1VSN271MP35S EKMR3B1VSN271MQ25S EKMR3B1VSN331MP40S EKMR3B1VSN331MQ30S EKMR3B1VSN391MP45S EKMR3B1VSN391MQ35S EKMR3B1VSN391MR25S EKMR3B1VSN471MP50S EKMR3B1VSN471MQ40S EKMR3B1VSN471MR30S EKMR3B1VSN471MA25S EKMR3B1VSN561MQ45S EKMR3B1VSN561MR35S EKMR3B1VSN681MQ50S EKMR3B1VSN681MR40S EKMR3B1VSN681MA30S EKMR3B1VSN821MR45S EKMR3B1VSN821MA35S EKMR3B1VSN102MR50S EKMR3B1VSN102MA40S EKMR3B1VSN122MA45S EKMR3B1VSN122MA50S EKMR351VSN151MP25S EKMR351VSN221MP30S EKMR351VSN221MQ25S EKMR351VSN271MP35S EKMR351VSN271MQ30S EKMR351VSN331MP40S EKMR351VSN331MP45S EKMR351VSN331MQ35S EKMR351VSN331MR25S EKMR351VSN391MP50S EKMR351VSN391MQ40S EKMR351VSN391MR30S EKMR351VSN391MA25S EKMR351VSN471MQ45S EKMR351VSN561MQ50S EKMR351VSN561MR35S EKMR351VSN561MR40S EKMR351VSN561MA30S EKMR351VSN681MR45S EKMR351VSN681MA35S EKMR351VSN821MR50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 233 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMRSeries STANDARD RATINGS WV (Vdc) 350 400 420 Cap (F) 820 1,000 1,200 120 180 180 220 220 270 270 270 270 330 330 330 330 390 390 470 470 470 560 560 680 680 820 820 1,000 120 150 150 180 180 220 220 220 220 270 Case size DxL(mm) Rated ripple current (Arms/105, 120Hz) Part No. 2.23 2.54 2.86 0.75 0.96 0.94 1.09 1.07 1.24 1.26 1.23 1.16 1.44 1.40 1.31 1.27 1.55 1.49 1.74 1.69 1.58 1.91 1.76 2.15 2.03 2.30 2.37 2.50 0.78 0.91 0.89 1.03 1.00 1.16 1.19 1.16 1.11 1.36 EKMR351VSN821MA40S EKMR351VSN102MA45S EKMR351VSN122MA50S EKMR401VSN121MP25S EKMR401VSN181MP30S EKMR401VSN181MQ25S EKMR401VSN221MP35S EKMR401VSN221MQ30S EKMR401VSN271MP40S EKMR401VSN271MP45S EKMR401VSN271MQ35S EKMR401VSN271MR25S EKMR401VSN331MP50S EKMR401VSN331MQ40S EKMR401VSN331MR30S EKMR401VSN331MA25S EKMR401VSN391MQ45S EKMR401VSN391MR35S EKMR401VSN471MQ50S EKMR401VSN471MR40S EKMR401VSN471MA30S EKMR401VSN561MR45S EKMR401VSN561MA35S EKMR401VSN681MR50S EKMR401VSN681MA40S EKMR401VSN821MA45S EKMR401VSN821MA50S EKMR401VSN102MA50S EKMR421VSN121MP25S EKMR421VSN151MP30S EKMR421VSN151MQ25S EKMR421VSN181MP35S EKMR421VSN181MQ30S EKMR421VSN221MP40S EKMR421VSN221MP45S EKMR421VSN221MQ35S EKMR421VSN221MR25S EKMR421VSN271MP50S 35x 40 35x 45 35x 50 22x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35x 50 22x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 22 x 45 25.4 x 35 30 x 25 22 x 50 WV (Vdc) 420 450 Cap (F) 270 270 270 330 330 390 390 390 470 470 560 560 680 820 100 120 150 150 180 180 220 220 220 270 270 270 270 270 330 330 330 390 470 470 470 560 560 680 Case size DxL(mm) 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 Rated ripple current (Arms/105, 120Hz) Part No. 1.32 1.26 1.26 1.49 1.45 1.66 1.63 1.58 1.85 1.77 2.07 2.02 2.29 2.59 0.71 0.82 0.94 0.89 1.05 1.00 1.19 1.16 1.11 1.36 1.32 1.35 1.26 1.26 1.52 1.45 1.45 1.63 1.85 1.90 1.77 2.02 2.08 2.36 EKMR421VSN271MQ40S EKMR421VSN271MR30S EKMR421VSN271MA25S EKMR421VSN331MQ45S EKMR421VSN331MR35S EKMR421VSN391MQ50S EKMR421VSN391MR40S EKMR421VSN391MA30S EKMR421VSN471MR45S EKMR421VSN471MA35S EKMR421VSN561MR50S EKMR421VSN561MA40S EKMR421VSN681MA45S EKMR421VSN821MA50S EKMR451VSN101MP25S EKMR451VSN121MP30S EKMR451VSN151MP35S EKMR451VSN151MQ25S EKMR451VSN181MP40S EKMR451VSN181MQ30S EKMR451VSN221MP45S EKMR451VSN221MQ35S EKMR451VSN221MR25S EKMR451VSN271MP50S EKMR451VSN271MQ40S EKMR451VSN271MQ45S EKMR451VSN271MR30S EKMR451VSN271MA25S EKMR451VSN331MQ50S EKMR451VSN331MR35S EKMR451VSN331MA30S EKMR451VSN391MR40S EKMR451VSN471MR45S EKMR451VSN471MR50S EKMR451VSN471MA35S EKMR451VSN561MA40S EKMR451VSN561MA45S EKMR451VSN681MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 234 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMQ KMR P232 Series Downsized Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant KMQ SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (35&50Vdc), -25 to +105 (160 to 450Vdc) 35&50Vdc, 160 to 450Vdc (at 20, 120Hz) 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Rated voltage (Vdc) 35V 50V 160 to 250V 315 to 400V 420 & 450V Nominal capacitance (F) 10,000>C C10,000 10,000>C C10,000 (at 20, 120Hz) tan(Max.) 0.30 0.35 0.25 0.30 0.15 0.15 0.20 Rated voltage (Vdc) 35&50V 160 to 250V 315 to 450V Z(-25)/Z(+20) 4 4 8 Z(-40)/Z(+20) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Terminal 4.00.5 L2 Negative mark PC board pin-out 2-1.2x6 D+1max. D+1max. 10 2-2 Vent Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 68F:680, 3,300F:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 235 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMQSeries STANDARD RATINGS WV (Vdc) 35 50 160 Cap (F) 4,700 5,600 5,600 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 27,000 33,000 2,700 3,300 3,300 3,900 3,900 4,700 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 15,000 18,000 470 560 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22 x 25 22x 25 25.4x 25 22x 30 25.4 x25 22 x35 25.4 x30 30 x25 22 x40 25.4 x35 30 x25 22 x50 25.4 x35 30 x30 35 x25 25.4 x40 30 x35 35 x25 25.4 x50 30 x40 35 x30 30 x50 35 x35 35 x40 35 x50 22 x25 22 x30 25.4x 25 22x 30 25.4x 25 22x 35 25.4 x30 30 x25 22 x40 25.4 x35 30 x25 22x 50 25.4x 40 30x 30 35x 25 25.4 x45 30 x35 35 x30 25.4 x50 30 x40 35 x30 30 x50 35 x35 35 x40 35 x50 22 x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 30 x25 22 x40 25.4 x35 30x 25 25.4x 40 30x 30 35x 25 25.4 x45 30 x35 35 x30 25.4 x50 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.87 2.04 2.00 2.36 2.21 2.65 2.49 2.62 3.00 2.88 2.90 3.47 3.15 3.25 3.20 3.61 3.78 3.60 4.14 4.30 4.10 5.00 4.64 5.37 6.00 1.65 1.92 1.76 2.08 2.04 2.43 2.50 2.29 2.63 2.61 2.80 3.05 2.94 3.30 2.77 3.60 3.60 3.60 4.00 4.00 4.00 4.29 4.37 4.50 5.30 1.40 1.50 1.70 1.70 2.00 2.00 2.00 2.20 2.20 2.20 2.30 2.30 2.30 2.50 2.50 2.50 2.70 WV (Vdc) Part No. EKMQ350VSN472MP25S EKMQ350VSN562MP25S EKMQ350VSN562MQ25S EKMQ350VSN682MP30S EKMQ350VSN682MQ25S EKMQ350VSN822MP35S EKMQ350VSN822MQ30S EKMQ350VSN822MR25S EKMQ350VSN103MP40S EKMQ350VSN103MQ35S EKMQ350VSN103MR25S EKMQ350VSN123MP50S EKMQ350VSN123MQ35S EKMQ350VSN123MR30S EKMQ350VSN123MA25S EKMQ350VSN153MQ40S EKMQ350VSN153MR35S EKMQ350VSN153MA25S EKMQ350VSN183MQ50S EKMQ350VSN183MR40S EKMQ350VSN183MA30S EKMQ350VSN223MR50S EKMQ350VSN223MA35S EKMQ350VSN273MA40S EKMQ350VSN333MA50S EKMQ500VSN272MP25S EKMQ500VSN332MP30S EKMQ500VSN332MQ25S EKMQ500VSN392MP30S EKMQ500VSN392MQ25S EKMQ500VSN472MP35S EKMQ500VSN472MQ30S EKMQ500VSN472MR25S EKMQ500VSN562MP40S EKMQ500VSN562MQ35S EKMQ500VSN562MR25S EKMQ500VSN682MP50S EKMQ500VSN682MQ40S EKMQ500VSN682MR30S EKMQ500VSN682MA25S EKMQ500VSN822MQ45S EKMQ500VSN822MR35S EKMQ500VSN822MA30S EKMQ500VSN103MQ50S EKMQ500VSN103MR40S EKMQ500VSN103MA30S EKMQ500VSN123MR50S EKMQ500VSN123MA35S EKMQ500VSN153MA40S EKMQ500VSN183MA50S EKMQ161VSN471MP25S EKMQ161VSN561MP30S EKMQ161VSN681MP30S EKMQ161VSN681MQ25S EKMQ161VSN821MP35S EKMQ161VSN821MQ30S EKMQ161VSN821MR25S EKMQ161VSN102MP40S EKMQ161VSN102MQ35S EKMQ161VSN102MR25S EKMQ161VSN122MQ40S EKMQ161VSN122MR30S EKMQ161VSN122MA25S EKMQ161VSN152MQ45S EKMQ161VSN152MR35S EKMQ161VSN152MA30S EKMQ161VSN182MQ50S 160 180 200 250 Cap (F) 1,800 1,800 2,200 2,200 2,700 2,700 3,300 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 220 270 330 330 390 390 470 470 470 560 560 560 680 680 680 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 30 30 x 45 35 x 40 35 x 45 22 x 25 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.70 2.70 2.90 2.90 3.10 3.10 3.30 1.30 1.40 1.50 1.50 1.70 1.70 2.00 2.00 2.00 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.50 2.50 2.50 2.70 2.70 2.90 2.90 3.10 1.31 1.45 1.67 1.67 1.75 1.75 2.04 2.04 2.04 2.30 2.30 2.30 2.30 2.65 2.65 2.65 2.80 2.80 3.08 3.08 3.48 1.00 1.10 1.20 1.20 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.70 1.70 1.70 Part No. EKMQ161VSN182MR40S EKMQ161VSN182MA30S EKMQ161VSN222MR45S EKMQ161VSN222MA35S EKMQ161VSN272MR50S EKMQ161VSN272MA40S EKMQ161VSN332MA50S EKMQ181VSN391MP25S EKMQ181VSN471MP30S EKMQ181VSN561MP30S EKMQ181VSN561MQ25S EKMQ181VSN681MP35S EKMQ181VSN681MQ30S EKMQ181VSN821MP40S EKMQ181VSN821MQ30S EKMQ181VSN821MR25S EKMQ181VSN102MP45S EKMQ181VSN102MQ40S EKMQ181VSN102MR30S EKMQ181VSN102MA25S EKMQ181VSN122MQ45S EKMQ181VSN122MR35S EKMQ181VSN122MA30S EKMQ181VSN152MQ50S EKMQ181VSN152MR40S EKMQ181VSN152MA30S EKMQ181VSN182MR45S EKMQ181VSN182MA35S EKMQ181VSN222MR50S EKMQ181VSN222MA40S EKMQ181VSN272MA50S EKMQ201VSN391MP25S EKMQ201VSN471MP30S EKMQ201VSN561MP30S EKMQ201VSN561MQ25S EKMQ201VSN681MP40S EKMQ201VSN681MQ30S EKMQ201VSN821MP45S EKMQ201VSN821MQ35S EKMQ201VSN821MR25S EKMQ201VSN102MP50S EKMQ201VSN102MQ45S EKMQ201VSN102MR30S EKMQ201VSN102MA25S EKMQ201VSN122MQ50S EKMQ201VSN122MR35S EKMQ201VSN122MA30S EKMQ201VSN152MR40S EKMQ201VSN152MA30S EKMQ201VSN182MR45S EKMQ201VSN182MA40S EKMQ201VSN222MA45S EKMQ251VSN221MP25S EKMQ251VSN271MP25S EKMQ251VSN331MP30S EKMQ251VSN331MQ25S EKMQ251VSN391MP35S EKMQ251VSN391MQ25S EKMQ251VSN471MP40S EKMQ251VSN471MQ30S EKMQ251VSN471MR25S EKMQ251VSN561MP45S EKMQ251VSN561MQ35S EKMQ251VSN561MR25S EKMQ251VSN681MP50S EKMQ251VSN681MQ40S EKMQ251VSN681MR30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 236 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMQSeries STANDARD RATINGS WV (Vdc) 250 315 350 400 Cap (F) 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 150 180 220 220 270 270 330 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 1,000 120 150 180 180 220 220 270 270 270 330 330 330 390 390 470 470 470 560 560 680 680 820 100 120 150 150 180 180 220 220 220 270 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x25 25.4 x45 30 x 35 35 x 30 30 x 40 35 x 30 30 x 45 35 x 35 35 x 45 35 x 50 22x 25 22x 30 22 x30 25.4 x25 22 x35 25.4 x30 22 x45 25.4 x 35 30 x 25 22x 45 25.4x 40 30 x30 35 x25 25.4 x45 30 x35 35 x25 25.4 x 50 30x 40 35x 30 30x 45 35 x35 30 x50 35 x40 35 x45 22 x25 22 x30 22 x 30 25.4x 25 22x 35 25.4x 30 22 x40 25.4 x30 30 x25 22 x45 25.4 x40 30 x 30 25.4x 45 30x 35 25.4x 50 30 x35 35 x30 30 x45 35 x35 30 x 50 35 x 40 35x 45 22x 25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x 45 25.4x 35 30x 25 22x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.70 2.00 2.00 2.00 2.20 2.20 2.30 2.30 2.50 2.70 0.82 0.90 1.00 1.00 1.10 1.10 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.70 1.70 2.00 2.00 2.30 0.75 0.82 0.90 0.90 1.00 1.00 1.10 1.10 1.10 1.20 1.20 1.20 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.70 1.70 1.90 0.70 0.75 0.88 0.88 0.95 0.95 1.10 1.10 1.10 1.22 WV (Vdc) Part No. EKMQ251VSN681MA25S EKMQ251VSN821MQ45S EKMQ251VSN821MR35S EKMQ251VSN821MA30S EKMQ251VSN102MR40S EKMQ251VSN102MA30S EKMQ251VSN122MR45S EKMQ251VSN122MA35S EKMQ251VSN152MA45S EKMQ251VSN182MA50S EKMQ3B1VSN151MP25S EKMQ3B1VSN181MP30S EKMQ3B1VSN221MP30S EKMQ3B1VSN221MQ25S EKMQ3B1VSN271MP35S EKMQ3B1VSN271MQ30S EKMQ3B1VSN331MP45S EKMQ3B1VSN331MQ35S EKMQ3B1VSN331MR25S EKMQ3B1VSN391MP45S EKMQ3B1VSN391MQ40S EKMQ3B1VSN391MR30S EKMQ3B1VSN391MA25S EKMQ3B1VSN471MQ45S EKMQ3B1VSN471MR35S EKMQ3B1VSN471MA25S EKMQ3B1VSN561MQ50S EKMQ3B1VSN561MR40S EKMQ3B1VSN561MA30S EKMQ3B1VSN681MR45S EKMQ3B1VSN681MA35S EKMQ3B1VSN821MR50S EKMQ3B1VSN821MA40S EKMQ3B1VSN102MA45S EKMQ351VSN121MP25S EKMQ351VSN151MP30S EKMQ351VSN181MP30S EKMQ351VSN181MQ25S EKMQ351VSN221MP35S EKMQ351VSN221MQ30S EKMQ351VSN271MP40S EKMQ351VSN271MQ30S EKMQ351VSN271MR25S EKMQ351VSN331MP45S EKMQ351VSN331MQ40S EKMQ351VSN331MR30S EKMQ351VSN391MQ45S EKMQ351VSN391MR35S EKMQ351VSN471MQ50S EKMQ351VSN471MR35S EKMQ351VSN471MA30S EKMQ351VSN561MR45S EKMQ351VSN561MA35S EKMQ351VSN681MR50S EKMQ351VSN681MA40S EKMQ351VSN821MA45S EKMQ401VSN101MP25S EKMQ401VSN121MP30S EKMQ401VSN151MP30S EKMQ401VSN151MQ25S EKMQ401VSN181MP35S EKMQ401VSN181MQ30S EKMQ401VSN221MP45S EKMQ401VSN221MQ35S EKMQ401VSN221MR25S EKMQ401VSN271MP50S 400 420 450 Cap (F) 270 270 270 330 330 330 390 390 390 470 470 560 560 680 82 100 100 120 120 150 150 150 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 68 82 100 100 120 120 150 150 150 180 180 180 220 220 220 270 270 270 330 330 390 390 470 560 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22x 25 22 x 25 25.4 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 25.4 x 40 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 40 30 x 30 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.22 1.22 1.22 1.44 1.44 1.44 1.55 1.55 1.55 1.68 1.68 1.90 1.90 2.12 0.64 0.66 0.66 0.81 0.81 0.84 0.84 0.84 0.91 0.91 0.91 1.05 1.05 1.05 1.05 1.25 1.25 1.25 1.42 1.42 1.42 1.61 1.61 1.86 1.86 2.10 2.20 0.50 0.56 0.64 0.64 0.72 0.72 0.79 0.79 0.79 0.87 0.87 0.87 1.00 1.00 1.00 1.19 1.19 1.19 1.38 1.38 1.55 1.55 1.74 1.90 Part No. EKMQ401VSN271MQ40S EKMQ401VSN271MR30S EKMQ401VSN271MA25S EKMQ401VSN331MQ45S EKMQ401VSN331MR35S EKMQ401VSN331MA30S EKMQ401VSN391MQ50S EKMQ401VSN391MR40S EKMQ401VSN391MA30S EKMQ401VSN471MR45S EKMQ401VSN471MA35S EKMQ401VSN561MR50S EKMQ401VSN561MA40S EKMQ401VSN681MA45S EKMQ421VSN820MP25S EKMQ421VSN101MP25S EKMQ421VSN101MQ25S EKMQ421VSN121MP30S EKMQ421VSN121MQ25S EKMQ421VSN151MP35S EKMQ421VSN151MQ30S EKMQ421VSN151MR25S EKMQ421VSN181MP40S EKMQ421VSN181MQ30S EKMQ421VSN181MR25S EKMQ421VSN221MP45S EKMQ421VSN221MQ35S EKMQ421VSN221MR30S EKMQ421VSN221MA25S EKMQ421VSN271MQ40S EKMQ421VSN271MR30S EKMQ421VSN271MA25S EKMQ421VSN331MQ50S EKMQ421VSN331MR35S EKMQ421VSN331MA30S EKMQ421VSN391MR40S EKMQ421VSN391MA35S EKMQ421VSN471MR45S EKMQ421VSN471MA40S EKMQ421VSN561MA45S EKMQ421VSN681MA50S EKMQ451VSN680MP25S EKMQ451VSN820MP30S EKMQ451VSN101MP30S EKMQ451VSN101MQ25S EKMQ451VSN121MP35S EKMQ451VSN121MQ30S EKMQ451VSN151MP40S EKMQ451VSN151MQ30S EKMQ451VSN151MR25S EKMQ451VSN181MP45S EKMQ451VSN181MQ40S EKMQ451VSN181MR30S EKMQ451VSN221MQ45S EKMQ451VSN221MR30S EKMQ451VSN221MA25S EKMQ451VSN271MQ50S EKMQ451VSN271MR40S EKMQ451VSN271MA30S EKMQ451VSN331MR45S EKMQ451VSN331MA35S EKMQ451VSN391MR50S EKMQ451VSN391MA40S EKMQ451VSN471MA45S EKMQ451VSN561MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 237 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMQSeries RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 35, 50Vdc 160 to 250Vdc 315 to 450Vdc 50 0.95 0.81 0.77 120 1.00 1.00 1.00 300 1.03 1.17 1.16 1k 1.05 1.32 1.30 10k 1.08 1.45 1.41 50k 1.08 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 238 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS RLA Downsized snap-ins, 85 New! Series Endurance with ripple current : 2,000 hours at 85 High ripple current capability in a commercial frequency range High ripple current for inverter control like air conditioner Rated voltage range : 180 to 250Vdc, Capacitance range : 600 to 2,200F Non solvent resistant type RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 180 to 250V 10% (K) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 180 to 250V tan (Max.) 0.15 Rated voltage (Vdc) 180 to 250V Z(-25)/Z(+20) 4 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D. F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D. F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : LI (30, 35) : Standard Sleeve (PVC : Black) Terminal 4.20.5 D+1max. D+1max. Vent 14.21 4.51 Negative mark PC board pin-out 10 50.5 L2.5 Code : VS (30, 35) Sleeve (PVC : Black) PC board pin-out 2-1.2x6 Negative mark Vent 2-2 L2.5 4.00.5 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RLA AAA L I N AAA K AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex .800F:801, 2,200F:222) Dummy terminal code Terminal code ( LI,VS) Voltage code (ex.180V:181, 200V:201) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 239 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85 RLASeries New! STANDARD RATINGS WV (Vdc) 180 200 210 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 85, 120Hz) 900 1,100 1,300 1,500 1,500 1,700 1,800 2,000 900 1,000 1,200 1,200 1,400 1,400 1,500 1,600 1,900 2,200 800 900 1,100 1,100 1,200 1,300 30 x35 30x 40 30x 45 30x 50 35 x40 30 x55 35 x45 35 x50 30 x35 30 x40 30x 45 35x 35 30x 50 35x 40 30 x55 35 x45 35 x50 35 x55 30 x35 30 x40 30 x45 35x 35 30x 50 35x 40 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 4.66 5.17 5.64 6.07 5.75 6.63 6.37 6.84 4.66 5.01 5.51 5.14 5.95 5.66 6.36 6.14 6.82 7.60 4.48 4.86 5.39 5.06 5.71 5.65 Part No. ERLA181LIN901KR35M ERLA181LIN112KR40M ERLA181LIN132KR45M ERLA181LIN152KR50M ERLA181LIN152KA40M ERLA181LIN172KR55M ERLA181LIN182KA45M ERLA181LIN202KA50M ERLA201LIN901KR35M ERLA201LIN102KR40M ERLA201LIN122KR45M ERLA201LIN122KA35M ERLA201LIN142KR50M ERLA201LIN142KA40M ERLA201LIN152KR55M ERLA201LIN162KA45M ERLA201LIN192KA50M ERLA201LIN222KA55M ERLA211LIN801KR35M ERLA211LIN901KR40M ERLA211LIN112KR45M ERLA211LIN112KA35M ERLA211LIN122KR50M ERLA211LIN132KA40M WV (Vdc) 210 220 250 Cap (F) 1,400 1,500 1,700 2,000 700 900 1,000 1,000 1,200 1,200 1,300 1,400 1,600 1,800 600 800 900 900 1,000 1,100 1,200 1,200 1,400 1,600 Rated ripple Case size current tan (Arms/ DxL(mm) 85, 120Hz) 30 x 55 35 x 45 35 x 50 35 x 55 30 x 35 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 30 x 55 35 x 45 35 x 50 35 x 55 30 x 35 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 30 x 55 35 x 45 35 x 50 35 x 55 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 6.31 6.21 6.82 7.62 4.27 4.85 5.19 4.87 5.68 5.44 6.09 5.96 6.51 7.10 4.03 4.66 5.01 4.73 5.32 5.33 5.96 5.68 6.25 6.87 Part No. ERLA211LIN142KR55M ERLA211LIN152KA45M ERLA211LIN172KA50M ERLA211LIN202KA55M ERLA221LIN701KR35M ERLA221LIN901KR40M ERLA221LIN102KR45M ERLA221LIN102KA35M ERLA221LIN122KR50M ERLA221LIN122KA40M ERLA221LIN132KR55M ERLA221LIN142KA45M ERLA221LIN162KA50M ERLA221LIN182KA55M ERLA251LIN601KR35M ERLA251LIN801KR40M ERLA251LIN901KR45M ERLA251LIN901KA35M ERLA251LIN102KR50M ERLA251LIN112KA40M ERLA251LIN122KR55M ERLA251LIN122KA45M ERLA251LIN142KA50M ERLA251LIN162KA55M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 180 to 250Vdc 50 0.70 120 1.00 300 1.17 1k 1.32 10k 1.45 50k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 240 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMM Series Long life snap-ins, 85 SMM Longer life from SMQ series Endurance with ripple current : 3,000 hours at 85 Non solvent resistant type RoHS Compliant Longer life SMQ P227 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z(-25)/Z(+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (20 to 35) : Standard Sleeve (PET : Black) Terminal Code : LI (35) Sleeve (PET : Black) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 2-2 *4.00.5 L2 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 *D=35mm : 3.50.5mm The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MM A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 3,300F:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 241 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85 SMMSeries STANDARD RATINGS WV (Vdc) 160 180 Cap (F) 270 270 330 390 390 390 470 470 470 560 560 560 560 680 680 680 680 680 820 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 3,300 220 270 330 330 330 390 390 470 470 470 470 560 560 560 680 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 20 x25 22 x 20 20 x 25 20 x 30 22 x 25 25.4 x 20 20 x 30 22 x 30 25.4 x 25 20 x 35 22 x 30 25.4 x 25 30x 20 20x 40 22 x35 25.4 x30 30 x25 35 x20 20 x45 22 x 40 25.4 x 30 30x 25 35x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22x 20 20x 25 20x 30 22x 25 25.4x 20 20x 30 22x 25 20x 35 22x 30 25.4x 25 30x 20 20x 40 22x 35 25.4 x25 20 x45 22 x35 25.4 x30 30 x25 35 x 20 20x 50 22x 40 25.4x 35 30 x25 22 x50 25.4 x40 30 x30 35 x25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.28 1.30 1.55 1.63 1.63 1.62 1.90 1.86 1.86 2.14 2.15 2.15 2.05 2.35 2.35 2.33 2.33 2.26 2.64 2.68 2.65 2.64 2.49 3.02 3.00 2.96 3.13 3.47 3.43 3.41 3.40 3.96 3.96 3.94 4.31 4.28 4.96 4.96 5.57 6.21 1.18 1.29 1.77 1.77 1.49 1.84 1.84 1.91 1.91 2.08 1.88 2.15 2.25 2.25 2.41 2.48 2.50 2.46 2.26 2.72 2.86 2.75 2.69 3.10 3.06 3.10 2.98 WV (Vdc) Part No. ESMM161VSN271MN25S ESMM161VSN271MP20S ESMM161VSN331MN25S ESMM161VSN391MN30S ESMM161VSN391MP25S ESMM161VSN391MQ20S ESMM161VSN471MN30S ESMM161VSN471MP30S ESMM161VSN471MQ25S ESMM161VSN561MN35S ESMM161VSN561MP30S ESMM161VSN561MQ25S ESMM161VSN561MR20S ESMM161VSN681MN40S ESMM161VSN681MP35S ESMM161VSN681MQ30S ESMM161VSN681MR25S ESMM161VSN681MA20S ESMM161VSN821MN45S ESMM161VSN821MP40S ESMM161VSN821MQ30S ESMM161VSN821MR25S ESMM161VSN821MA20S ESMM161VSN102MP45S ESMM161VSN102MQ35S ESMM161VSN102MR30S ESMM161VSN102MA25S ESMM161VSN122MP50S ESMM161VSN122MQ40S ESMM161VSN122MR30S ESMM161VSN122MA25S ESMM161VSN152MQ50S ESMM161VSN152MR35S ESMM161VSN152MA30S ESMM161VSN182MR40S ESMM161VSN182MA35S ESMM161VSN222MR50S ESMM161VSN222MA40S ESMM161VSN272MA45S ESMM161VSN332MA50S ESMM181VSN221MP20S ESMM181VSN271MN25S ESMM181VSN331MN30S ESMM181VSN331MP25S ESMM181VSN331MQ20S ESMM181VSN391MN30S ESMM181VSN391MP25S ESMM181VSN471MN35S ESMM181VSN471MP30S ESMM181VSN471MQ25S ESMM181VSN471MR20S ESMM181VSN561MN40S ESMM181VSN561MP35S ESMM181VSN561MQ25S ESMM181VSN681MN45S ESMM181VSN681MP35S ESMM181VSN681MQ30S ESMM181VSN681MR25S ESMM181VSN681MA20S ESMM181VSN821MN50S ESMM181VSN821MP40S ESMM181VSN821MQ35S ESMM181VSN821MR25S ESMM181VSN102MP50S ESMM181VSN102MQ40S ESMM181VSN102MR30S ESMM181VSN102MA25S 180 200 220 Cap (F) 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,700 220 220 270 270 270 330 330 330 390 390 390 390 470 470 470 470 560 560 560 560 560 680 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 180 220 270 270 270 330 330 330 330 390 390 390 390 470 470 470 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 25.4 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 35 35 x 40 35 x 50 20 x 25 22 x 20 20 x 25 22 x 25 25.4 x 20 20 x 30 22 x 25 25.4 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 40 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 30 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 35 x 30 25.4 x 45 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 20 20 x 25 20 x 30 22 x 25 25.4 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 40 22 x 35 25.4 x 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.63 3.55 3.49 4.10 4.02 4.55 4.54 4.83 5.30 1.19 1.18 1.39 1.37 1.35 1.56 1.51 1.49 1.74 1.73 1.71 1.71 2.03 1.97 1.95 1.88 2.18 2.18 2.15 2.15 2.05 2.48 2.48 2.48 2.48 2.36 2.81 2.79 2.80 2.83 3.28 3.28 3.15 3.26 3.61 3.61 3.57 4.13 4.06 4.60 4.59 5.25 1.06 1.25 1.46 1.47 1.35 1.64 1.70 1.69 1.58 1.84 1.89 1.84 1.71 2.12 2.08 2.08 Part No. ESMM181VSN122MQ45S ESMM181VSN122MR35S ESMM181VSN122MA30S ESMM181VSN152MR40S ESMM181VSN152MA35S ESMM181VSN182MR45S ESMM181VSN182MA35S ESMM181VSN222MA40S ESMM181VSN272MA50S ESMM201VSN221MN25S ESMM201VSN221MP20S ESMM201VSN271MN25S ESMM201VSN271MP25S ESMM201VSN271MQ20S ESMM201VSN331MN30S ESMM201VSN331MP25S ESMM201VSN331MQ20S ESMM201VSN391MN35S ESMM201VSN391MP30S ESMM201VSN391MQ25S ESMM201VSN391MR20S ESMM201VSN471MN35S ESMM201VSN471MP30S ESMM201VSN471MQ25S ESMM201VSN471MR20S ESMM201VSN561MN40S ESMM201VSN561MP35S ESMM201VSN561MQ30S ESMM201VSN561MR25S ESMM201VSN561MA20S ESMM201VSN681MN50S ESMM201VSN681MP40S ESMM201VSN681MQ30S ESMM201VSN681MR25S ESMM201VSN681MA20S ESMM201VSN821MP45S ESMM201VSN821MQ35S ESMM201VSN821MR30S ESMM201VSN821MA25S ESMM201VSN102MP50S ESMM201VSN102MQ40S ESMM201VSN102MR35S ESMM201VSN102MA30S ESMM201VSN122MQ45S ESMM201VSN122MR35S ESMM201VSN122MA30S ESMM201VSN152MR45S ESMM201VSN152MA35S ESMM201VSN182MR50S ESMM201VSN182MA40S ESMM201VSN222MA45S ESMM221VSN181MP20S ESMM221VSN221MN25S ESMM221VSN271MN30S ESMM221VSN271MP25S ESMM221VSN271MQ20S ESMM221VSN331MN35S ESMM221VSN331MP30S ESMM221VSN331MQ25S ESMM221VSN331MR20S ESMM221VSN391MN35S ESMM221VSN391MP30S ESMM221VSN391MQ25S ESMM221VSN391MR20S ESMM221VSN471MN40S ESMM221VSN471MP35S ESMM221VSN471MQ30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 242 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85 SMMSeries STANDARD RATINGS WV (Vdc) 220 250 315 Cap (F) 470 470 560 560 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 150 180 180 220 220 220 270 270 330 330 330 330 390 390 390 390 390 470 470 470 470 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 100 120 120 150 150 150 180 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 30 x25 35 x20 20 x 50 22 x 40 25.4x 35 30x 25 35 x20 22 x45 25.4 x35 30 x30 35 x25 25.4 x 45 30 x 35 35x 30 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 22x 20 20 x25 22 x20 20 x25 22 x25 25.4 x20 20 x 30 22x 25 20x 35 22x 30 25.4x 25 30 x20 20 x40 22 x35 25.4 x30 30 x25 35 x 20 20x 50 22x 35 25.4x 35 30 x25 35 x20 22 x40 25.4 x35 30 x25 22 x 50 25.4x 40 30x 30 35x 25 25.4 x45 30 x35 35 x30 30 x40 35 x35 30 x45 35 x35 35 x40 35 x50 22 x20 20 x 25 25.4 x 20 20x 30 22x 25 25.4 x20 20 x35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.12 1.88 2.33 2.33 2.38 2.31 2.14 2.63 2.68 2.62 2.58 3.01 2.99 2.79 3.40 3.42 3.29 3.88 3.68 4.44 4.10 4.52 0.97 1.20 1.06 1.26 1.24 1.22 1.42 1.50 1.68 1.66 1.61 1.58 1.92 1.88 1.88 1.86 1.71 2.06 2.15 2.15 2.05 1.88 2.48 2.35 2.35 2.61 2.67 2.71 2.58 3.01 2.98 2.96 3.56 3.48 3.99 3.84 4.33 4.54 0.79 0.89 0.90 1.05 1.06 1.00 1.18 WV (Vdc) Part No. ESMM221VSN471MR25S ESMM221VSN471MA20S ESMM221VSN561MN50S ESMM221VSN561MP40S ESMM221VSN561MQ35S ESMM221VSN561MR25S ESMM221VSN561MA20S ESMM221VSN681MP45S ESMM221VSN681MQ35S ESMM221VSN681MR30S ESMM221VSN681MA25S ESMM221VSN821MQ45S ESMM221VSN821MR35S ESMM221VSN821MA30S ESMM221VSN102MQ50S ESMM221VSN102MR35S ESMM221VSN102MA30S ESMM221VSN122MR40S ESMM221VSN122MA35S ESMM221VSN152MR50S ESMM221VSN152MA40S ESMM221VSN182MA45S ESMM251VSN151MP20S ESMM251VSN181MN25S ESMM251VSN181MP20S ESMM251VSN221MN25S ESMM251VSN221MP25S ESMM251VSN221MQ20S ESMM251VSN271MN30S ESMM251VSN271MP25S ESMM251VSN331MN35S ESMM251VSN331MP30S ESMM251VSN331MQ25S ESMM251VSN331MR20S ESMM251VSN391MN40S ESMM251VSN391MP35S ESMM251VSN391MQ30S ESMM251VSN391MR25S ESMM251VSN391MA20S ESMM251VSN471MN50S ESMM251VSN471MP35S ESMM251VSN471MQ35S ESMM251VSN471MR25S ESMM251VSN471MA20S ESMM251VSN561MP40S ESMM251VSN561MQ35S ESMM251VSN561MR25S ESMM251VSN681MP50S ESMM251VSN681MQ40S ESMM251VSN681MR30S ESMM251VSN681MA25S ESMM251VSN821MQ45S ESMM251VSN821MR35S ESMM251VSN821MA30S ESMM251VSN102MR40S ESMM251VSN102MA35S ESMM251VSN122MR45S ESMM251VSN122MA35S ESMM251VSN152MA40S ESMM251VSN182MA50S ESMM3B1VSN101MP20S ESMM3B1VSN121MN25S ESMM3B1VSN121MQ20S ESMM3B1VSN151MN30S ESMM3B1VSN151MP25S ESMM3B1VSN151MQ20S ESMM3B1VSN181MN35S 315 350 Cap (F) 180 180 180 220 220 220 220 270 270 270 270 270 330 330 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 1,000 82 100 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 220 270 270 270 270 270 330 330 330 330 390 390 390 470 470 470 560 560 680 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 22 x 30 25.4 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 45 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 20 20 x 25 20 x 30 22 x 25 25.4 x 20 20 x 30 22 x 30 25.4 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 45 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 35 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 25.4 x 40 30 x 35 35 x 30 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.29 1.38 1.16 1.30 1.41 1.47 1.28 1.52 1.68 1.70 1.55 1.43 1.73 1.91 1.94 1.98 2.07 2.11 2.15 1.95 2.31 2.38 2.46 2.46 2.63 2.69 2.82 3.05 3.28 3.45 3.59 0.72 0.81 0.96 1.04 0.90 1.10 1.20 1.22 1.06 1.24 1.34 1.37 1.16 1.37 1.47 1.53 1.54 1.29 1.56 1.70 1.73 1.80 1.49 1.87 1.97 2.03 1.80 2.14 2.23 2.30 2.55 2.53 2.55 2.73 2.75 3.15 Part No. ESMM3B1VSN181MP30S ESMM3B1VSN181MQ25S ESMM3B1VSN181MR20S ESMM3B1VSN221MN35S ESMM3B1VSN221MP30S ESMM3B1VSN221MQ25S ESMM3B1VSN221MR20S ESMM3B1VSN271MN45S ESMM3B1VSN271MP35S ESMM3B1VSN271MQ30S ESMM3B1VSN271MR25S ESMM3B1VSN271MA20S ESMM3B1VSN331MN50S ESMM3B1VSN331MP40S ESMM3B1VSN331MQ35S ESMM3B1VSN331MR25S ESMM3B1VSN391MP45S ESMM3B1VSN391MQ40S ESMM3B1VSN391MR30S ESMM3B1VSN391MA25S ESMM3B1VSN471MQ45S ESMM3B1VSN471MR35S ESMM3B1VSN471MA30S ESMM3B1VSN561MQ50S ESMM3B1VSN561MR35S ESMM3B1VSN561MA30S ESMM3B1VSN681MR45S ESMM3B1VSN681MA35S ESMM3B1VSN821MR50S ESMM3B1VSN821MA40S ESMM3B1VSN102MA45S ESMM351VSN820MP20S ESMM351VSN101MN25S ESMM351VSN121MN30S ESMM351VSN121MP25S ESMM351VSN121MQ20S ESMM351VSN151MN30S ESMM351VSN151MP30S ESMM351VSN151MQ25S ESMM351VSN151MR20S ESMM351VSN181MN35S ESMM351VSN181MP30S ESMM351VSN181MQ25S ESMM351VSN181MR20S ESMM351VSN221MN45S ESMM351VSN221MP35S ESMM351VSN221MQ30S ESMM351VSN221MR25S ESMM351VSN221MA20S ESMM351VSN271MN50S ESMM351VSN271MP40S ESMM351VSN271MQ35S ESMM351VSN271MR25S ESMM351VSN271MA20S ESMM351VSN331MP45S ESMM351VSN331MQ35S ESMM351VSN331MR30S ESMM351VSN331MA25S ESMM351VSN391MQ40S ESMM351VSN391MR35S ESMM351VSN391MA30S ESMM351VSN471MQ50S ESMM351VSN471MR35S ESMM351VSN471MA30S ESMM351VSN561MR40S ESMM351VSN561MA35S ESMM351VSN681MR50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 243 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85 SMMSeries STANDARD RATINGS WV (Vdc) 350 400 420 Cap (F) 680 820 1,000 68 68 82 82 82 100 100 100 120 120 120 120 150 150 150 150 180 180 180 180 180 220 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 560 560 680 47 56 56 68 68 82 82 82 100 100 100 100 120 120 120 120 150 150 150 150 150 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 35 x40 35 x45 35 x50 20 x25 22 x 20 20 x 25 22x 25 25.4x 20 20 x30 22 x25 25.4 x20 20 x35 22 x30 25.4 x 25 30 x 20 20x 40 22x 35 25.4 x30 30 x25 20 x45 22 x40 25.4 x30 30 x 25 35x 20 20x 50 22x 45 25.4 x35 30 x30 35 x25 22 x50 25.4 x40 30 x 30 35x 25 25.4x 45 30x 35 35 x30 25.4 x50 30 x40 35 x35 30 x45 35 x 35 30x 50 35x 40 35x 50 22x 20 20 x25 22 x20 20 x25 25.4 x20 20 x 30 22 x 25 25.4x 20 20x 35 22 x30 25.4 x25 30 x20 20 x35 22 x30 25.4 x 25 30x 20 20x 40 22x 35 25.4 x30 30 x25 35 x20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.15 3.47 3.60 0.75 0.65 0.82 0.84 0.74 0.95 0.99 0.82 1.07 1.09 1.13 0.95 1.22 1.24 1.27 1.20 1.28 1.41 1.44 1.52 1.16 1.41 1.58 1.64 1.66 1.47 1.65 1.79 1.82 1.63 2.00 2.05 2.05 2.12 2.26 2.28 2.51 2.54 2.85 2.85 3.10 0.54 0.58 0.59 0.70 0.68 0.80 0.85 0.74 0.90 0.97 0.98 0.87 1.04 1.07 1.08 0.95 1.17 1.21 1.26 1.30 1.11 WV (Vdc) Part No. ESMM351VSN681MA40S ESMM351VSN821MA45S ESMM351VSN102MA50S ESMM401VSN680MN25S ESMM401VSN680MP20S ESMM401VSN820MN25S ESMM401VSN820MP25S ESMM401VSN820MQ20S ESMM401VSN101MN30S ESMM401VSN101MP25S ESMM401VSN101MQ20S ESMM401VSN121MN35S ESMM401VSN121MP30S ESMM401VSN121MQ25S ESMM401VSN121MR20S ESMM401VSN151MN40S ESMM401VSN151MP35S ESMM401VSN151MQ30S ESMM401VSN151MR25S ESMM401VSN181MN45S ESMM401VSN181MP40S ESMM401VSN181MQ30S ESMM401VSN181MR25S ESMM401VSN181MA20S ESMM401VSN221MN50S ESMM401VSN221MP45S ESMM401VSN221MQ35S ESMM401VSN221MR30S ESMM401VSN221MA25S ESMM401VSN271MP50S ESMM401VSN271MQ40S ESMM401VSN271MR30S ESMM401VSN271MA25S ESMM401VSN331MQ45S ESMM401VSN331MR35S ESMM401VSN331MA30S ESMM401VSN391MQ50S ESMM401VSN391MR40S ESMM401VSN391MA35S ESMM401VSN471MR45S ESMM401VSN471MA35S ESMM401VSN561MR50S ESMM401VSN561MA40S ESMM401VSN681MA50S ESMM421VSN470MP20S ESMM421VSN560MN25S ESMM421VSN560MP20S ESMM421VSN680MN25S ESMM421VSN680MQ20S ESMM421VSN820MN30S ESMM421VSN820MP25S ESMM421VSN820MQ20S ESMM421VSN101MN35S ESMM421VSN101MP30S ESMM421VSN101MQ25S ESMM421VSN101MR20S ESMM421VSN121MN35S ESMM421VSN121MP30S ESMM421VSN121MQ25S ESMM421VSN121MR20S ESMM421VSN151MN40S ESMM421VSN151MP35S ESMM421VSN151MQ30S ESMM421VSN151MR25S ESMM421VSN151MA20S 420 450 Cap (F) 180 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 47 56 56 68 68 68 82 82 82 82 100 100 100 100 120 120 120 120 120 150 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 20 x 50 22 x 40 25.4 x 35 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 25.4 x 40 30 x 35 35 x 30 25.4 x 50 30 x 35 35 x 35 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 22 x 20 20 x 25 22 x 20 20 x 30 22 x 25 25.4 x 20 20 x 35 22 x 25 25.4 x 20 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 40 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 45 22 x 40 25.4 x 30 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 35 30 x 45 35 x 40 30 x 50 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.27 1.33 1.42 1.48 1.16 1.55 1.58 1.65 1.47 1.74 1.90 1.94 2.20 1.98 2.17 2.22 2.27 2.50 2.61 2.95 3.15 0.54 0.61 0.59 0.71 0.71 0.68 0.80 0.86 0.74 0.79 0.88 0.95 0.97 0.87 0.99 1.07 1.09 1.12 0.99 1.13 1.18 1.25 1.29 1.06 1.32 1.40 1.45 1.33 1.48 1.59 1.64 1.66 1.73 1.89 1.90 2.12 2.12 2.15 2.35 2.38 2.65 2.68 2.88 Part No. ESMM421VSN181MN50S ESMM421VSN181MP40S ESMM421VSN181MQ35S ESMM421VSN181MR25S ESMM421VSN181MA20S ESMM421VSN221MP45S ESMM421VSN221MQ35S ESMM421VSN221MR30S ESMM421VSN221MA25S ESMM421VSN271MQ40S ESMM421VSN271MR35S ESMM421VSN271MA30S ESMM421VSN331MQ50S ESMM421VSN331MR35S ESMM421VSN331MA35S ESMM421VSN391MR40S ESMM421VSN391MA35S ESMM421VSN471MR45S ESMM421VSN471MA40S ESMM421VSN561MA45S ESMM421VSN681MA50S ESMM451VSN470MP20S ESMM451VSN560MN25S ESMM451VSN560MP20S ESMM451VSN680MN30S ESMM451VSN680MP25S ESMM451VSN680MQ20S ESMM451VSN820MN35S ESMM451VSN820MP25S ESMM451VSN820MQ20S ESMM451VSN820MR20S ESMM451VSN101MN35S ESMM451VSN101MP30S ESMM451VSN101MQ25S ESMM451VSN101MR20S ESMM451VSN121MN40S ESMM451VSN121MP35S ESMM451VSN121MQ30S ESMM451VSN121MR25S ESMM451VSN121MA20S ESMM451VSN151MN45S ESMM451VSN151MP40S ESMM451VSN151MQ30S ESMM451VSN151MR25S ESMM451VSN151MA20S ESMM451VSN181MP45S ESMM451VSN181MQ35S ESMM451VSN181MR30S ESMM451VSN181MA25S ESMM451VSN221MP50S ESMM451VSN221MQ40S ESMM451VSN221MR30S ESMM451VSN221MA25S ESMM451VSN271MQ45S ESMM451VSN271MR35S ESMM451VSN271MA30S ESMM451VSN331MQ50S ESMM451VSN331MR40S ESMM451VSN331MA35S ESMM451VSN391MR45S ESMM451VSN391MA40S ESMM451VSN471MR50S ESMM451VSN471MA45S ESMM451VSN561MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 244 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMT Series High ripple snap-ins, 105 KMT Higher ripple current from KMS series Endurance with ripple current : 3,000 hours at 105 Rated voltage range : 420, 450Vdc, Capacitance range : 82 to 680F For inverter control, switching power supplies Non solvent resistant type RoHS Compliant Higher ripple KMS P247 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 420, 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 420 & 450V tan(Max.) 0.20 Rated voltage (Vdc) 420 & 450V Z(-25)/Z(+20) 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 2-2 4.00.5 L2.5 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E KMT 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 330F:331) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 420V:421,450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 245 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 105 KMTSeries STANDARD RATINGS WV (Vdc) Cap (F) 420 100 120 120 150 180 180 180 220 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22 x25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 22 x 50 25.4 x 35 30 x 30 35 x 25 25.4 x 40 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.89 1.06 1.09 1.21 1.34 1.28 1.42 1.47 1.60 1.47 1.64 1.64 1.63 1.79 1.87 1.93 2.10 2.05 2.32 2.32 2.51 2.62 2.88 3.10 Part No. EKMT421VSN101MP25S EKMT421VSN121MP30S EKMT421VSN121MQ25S EKMT421VSN151MP35S EKMT421VSN181MP40S EKMT421VSN181MQ30S EKMT421VSN181MR25S EKMT421VSN221MP45S EKMT421VSN221MP50S EKMT421VSN221MQ35S EKMT421VSN221MR30S EKMT421VSN221MA25S EKMT421VSN271MQ40S EKMT421VSN271MQ45S EKMT421VSN271MR35S EKMT421VSN331MQ50S EKMT421VSN331MR40S EKMT421VSN331MA30S EKMT421VSN391MR45S EKMT421VSN391MA35S EKMT421VSN471MR50S EKMT421VSN471MA40S EKMT421VSN561MA45S EKMT421VSN681MA50S WV (Vdc) Cap (F) 450 82 100 100 120 150 150 150 180 180 180 180 180 220 220 270 270 270 330 330 390 390 470 560 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 35 30 x 25 22 x 45 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.81 0.97 1.04 1.08 1.22 1.31 1.31 1.35 1.42 1.35 1.49 1.60 1.55 1.71 1.74 1.90 1.90 2.20 2.20 2.40 2.42 2.67 2.85 Part No. EKMT451VSN820MP25S EKMT451VSN101MP30S EKMT451VSN101MQ25S EKMT451VSN121MP35S EKMT451VSN151MP40S EKMT451VSN151MQ35S EKMT451VSN151MR25S EKMT451VSN181MP45S EKMT451VSN181MP50S EKMT451VSN181MQ40S EKMT451VSN181MR30S EKMT451VSN181MA25S EKMT451VSN221MQ45S EKMT451VSN221MR35S EKMT451VSN271MQ50S EKMT451VSN271MR40S EKMT451VSN271MA30S EKMT451VSN331MR45S EKMT451VSN331MA35S EKMT451VSN391MR50S EKMT451VSN391MA40S EKMT451VSN471MA45S EKMT451VSN561MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 420, 450Vdc 50 0.68 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 246 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMS Downsized snap-ins, 105 LXS P268 Series Longer life KMS For solar power generation Endurance with ripple current : 105 3,000 hours Rated voltage range : 160 to 500V Capacitance range : 47 to 3,300F Non solvent resistant type RoHS Compliant Downsized Higher ripple KMM P250 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 500Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 to 500V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 to 500V Z(-25)/Z(+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 2-2 4.00.5 L2.5 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMS A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100F:101, 1,000F:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 400V:401) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 247 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMSSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) 470 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 2,700 2,700 3,300 390 560 560 680 820 820 820 1,000 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22 x25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x40 22 x45 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 25.4 x50 30 x40 35 x30 30 x45 35 x35 30 x50 35 x40 35 x45 35 x 50 22x 25 22x 30 25.4x 25 22x 35 22x 40 25.4x 30 30x 25 22 x 45 22 x 50 25.4 x 35 25.4 x 40 30 x 30 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x25 22 x30 22 x35 25.4 x25 22 x40 25.4 x30 22 x45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.47 1.86 1.84 2.09 2.08 2.35 2.40 2.40 2.50 2.69 2.68 2.77 2.91 3.05 3.17 3.40 3.57 3.62 4.05 4.07 4.56 4.67 4.78 5.40 1.34 1.68 1.67 1.90 2.13 2.08 2.26 2.40 2.45 2.40 2.45 2.52 2.73 2.83 2.91 3.10 3.26 3.31 3.66 3.68 4.11 4.22 4.78 4.88 1.34 1.54 1.72 1.67 1.94 1.89 2.17 2.17 2.26 2.45 2.45 2.52 2.66 2.73 2.78 2.83 2.96 3.26 3.36 Part No. EKMS161VSN471MP25S EKMS161VSN681MP30S EKMS161VSN681MQ25S EKMS161VSN821MP35S EKMS161VSN821MQ30S EKMS161VSN102MP40S EKMS161VSN102MP45S EKMS161VSN102MQ35S EKMS161VSN102MR25S EKMS161VSN122MP50S EKMS161VSN122MQ40S EKMS161VSN122MR30S EKMS161VSN122MA25S EKMS161VSN152MQ45S EKMS161VSN152MR35S EKMS161VSN182MQ50S EKMS161VSN182MR40S EKMS161VSN182MA30S EKMS161VSN222MR45S EKMS161VSN222MA35S EKMS161VSN272MR50S EKMS161VSN272MA40S EKMS161VSN272MA45S EKMS161VSN332MA50S EKMS181VSN391MP25S EKMS181VSN561MP30S EKMS181VSN561MQ25S EKMS181VSN681MP35S EKMS181VSN821MP40S EKMS181VSN821MQ30S EKMS181VSN821MR25S EKMS181VSN102MP45S EKMS181VSN102MP50S EKMS181VSN102MQ35S EKMS181VSN102MQ40S EKMS181VSN102MR30S EKMS181VSN122MQ45S EKMS181VSN122MR35S EKMS181VSN122MA25S EKMS181VSN152MQ50S EKMS181VSN152MR40S EKMS181VSN152MA30S EKMS181VSN182MR45S EKMS181VSN182MA35S EKMS181VSN222MR50S EKMS181VSN222MA40S EKMS181VSN272MA45S EKMS181VSN272MA50S EKMS201VSN391MP25S EKMS201VSN471MP30S EKMS201VSN561MP35S EKMS201VSN561MQ25S EKMS201VSN681MP40S EKMS201VSN681MQ30S EKMS201VSN821MP45S EKMS201VSN821MQ35S EKMS201VSN821MR25S EKMS201VSN102MP50S EKMS201VSN102MQ40S EKMS201VSN102MR30S EKMS201VSN102MA25S EKMS201VSN122MQ45S EKMS201VSN122MQ50S EKMS201VSN122MR35S EKMS201VSN122MA30S EKMS201VSN152MR40S EKMS201VSN152MA35S WV (Vdc) 200 250 315 400 Cap (F) 1,800 1,800 1,800 2,200 2,700 270 330 390 390 470 470 560 560 560 680 680 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 180 220 220 270 330 330 330 390 390 390 470 470 470 560 560 560 560 680 680 820 820 820 1,000 1,200 120 150 180 180 220 220 270 270 270 330 330 330 330 390 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 30 x 45 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 22 x 50 25.4 x 35 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.66 3.72 3.81 4.32 4.88 1.11 1.29 1.44 1.40 1.61 1.57 1.79 1.79 1.87 2.02 2.02 2.08 2.19 2.26 2.34 2.53 2.66 2.70 2.99 3.04 3.00 3.48 3.56 3.98 0.95 1.10 1.10 1.24 1.40 1.38 1.43 1.56 1.59 1.57 1.76 1.73 1.82 1.96 1.99 1.93 2.02 2.19 2.26 2.47 2.51 2.57 2.91 3.25 0.77 0.90 1.02 0.99 1.15 1.13 1.29 1.30 1.29 1.47 1.47 1.45 1.52 1.63 Part No. EKMS201VSN182MR45S EKMS201VSN182MR50S EKMS201VSN182MA40S EKMS201VSN222MA45S EKMS201VSN272MA50S EKMS251VSN271MP25S EKMS251VSN331MP30S EKMS251VSN391MP35S EKMS251VSN391MQ25S EKMS251VSN471MP40S EKMS251VSN471MQ30S EKMS251VSN561MP45S EKMS251VSN561MQ35S EKMS251VSN561MR25S EKMS251VSN681MP50S EKMS251VSN681MQ40S EKMS251VSN681MR30S EKMS251VSN681MA25S EKMS251VSN821MQ45S EKMS251VSN821MR35S EKMS251VSN102MQ50S EKMS251VSN102MR40S EKMS251VSN102MA30S EKMS251VSN122MR45S EKMS251VSN122MR50S EKMS251VSN122MA35S EKMS251VSN152MA40S EKMS251VSN152MA45S EKMS251VSN182MA50S EKMS3B1VSN181MP25S EKMS3B1VSN221MP30S EKMS3B1VSN221MQ25S EKMS3B1VSN271MP35S EKMS3B1VSN331MP40S EKMS3B1VSN331MQ30S EKMS3B1VSN331MR25S EKMS3B1VSN391MP45S EKMS3B1VSN391MP50S EKMS3B1VSN391MQ35S EKMS3B1VSN471MQ40S EKMS3B1VSN471MR30S EKMS3B1VSN471MA25S EKMS3B1VSN561MQ45S EKMS3B1VSN561MQ50S EKMS3B1VSN561MR35S EKMS3B1VSN561MA30S EKMS3B1VSN681MR40S EKMS3B1VSN681MA35S EKMS3B1VSN821MR45S EKMS3B1VSN821MR50S EKMS3B1VSN821MA40S EKMS3B1VSN102MA45S EKMS3B1VSN122MA50S EKMS401VSN121MP25S EKMS401VSN151MP30S EKMS401VSN181MP35S EKMS401VSN181MQ25S EKMS401VSN221MP40S EKMS401VSN221MQ30S EKMS401VSN271MP45S EKMS401VSN271MQ35S EKMS401VSN271MR25S EKMS401VSN331MP50S EKMS401VSN331MQ40S EKMS401VSN331MR30S EKMS401VSN331MA25S EKMS401VSN391MQ45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 248 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105 KMSSeries STANDARD RATINGS WV (Vdc) 400 420 450 Cap (F) 390 390 470 470 560 560 560 680 680 820 100 120 120 150 180 180 180 220 220 220 220 270 270 270 330 330 330 330 390 390 470 470 560 680 82 120 120 120 150 150 180 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 25.4 x50 30 x35 30 x 40 35 x 30 30x 45 30x 50 35 x35 35 x40 35 x45 35 x50 22 x25 22 x 30 25.4 x 25 22x 35 22x 40 25.4 x30 30 x25 22 x45 22 x50 25.4 x35 30 x 30 25.4x 40 25.4x 45 35x 25 25.4 x50 30 x35 30 x40 35 x30 30 x45 35 x 35 30x 50 35x 40 35x 45 35 x50 22 x25 22 x30 22 x35 25.4 x25 22 x40 25.4 x 30 22x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.66 1.61 1.82 1.85 2.04 2.07 2.05 2.34 2.40 2.69 0.70 0.81 0.81 0.93 1.04 1.02 1.06 1.17 1.20 1.18 1.18 1.33 1.36 1.38 1.52 1.48 1.52 1.55 1.70 1.71 1.90 1.95 2.17 2.45 0.64 0.81 0.83 0.81 0.94 0.93 1.06 Part No. EKMS401VSN391MQ50S EKMS401VSN391MR35S EKMS401VSN471MR40S EKMS401VSN471MA30S EKMS401VSN561MR45S EKMS401VSN561MR50S EKMS401VSN561MA35S EKMS401VSN681MA40S EKMS401VSN681MA45S EKMS401VSN821MA50S EKMS421VSN101MP25S EKMS421VSN121MP30S EKMS421VSN121MQ25S EKMS421VSN151MP35S EKMS421VSN181MP40S EKMS421VSN181MQ30S EKMS421VSN181MR25S EKMS421VSN221MP45S EKMS421VSN221MP50S EKMS421VSN221MQ35S EKMS421VSN221MR30S EKMS421VSN271MQ40S EKMS421VSN271MQ45S EKMS421VSN271MA25S EKMS421VSN331MQ50S EKMS421VSN331MR35S EKMS421VSN331MR40S EKMS421VSN331MA30S EKMS421VSN391MR45S EKMS421VSN391MA35S EKMS421VSN471MR50S EKMS421VSN471MA40S EKMS421VSN561MA45S EKMS421VSN681MA50S EKMS451VSN820MP25S EKMS451VSN121MP30S EKMS451VSN121MP35S EKMS451VSN121MQ25S EKMS451VSN151MP40S EKMS451VSN151MQ30S EKMS451VSN181MP45S WV (Vdc) 450 500 Cap (F) 180 180 220 220 220 220 270 270 270 270 330 390 390 390 470 470 560 47 56 68 82 82 100 100 120 120 120 150 150 150 180 180 180 220 220 270 270 330 390 470 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 22x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 45 30 x 25 22 x 50 25.4 x 35 30 x 30 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35 x 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.06 1.06 1.20 1.20 1.18 1.24 1.36 1.38 1.34 1.40 1.52 1.70 1.73 1.71 1.95 1.99 2.22 0.51 0.58 0.65 0.72 0.74 0.83 0.82 0.93 0.93 0.91 1.08 1.04 0.99 1.20 1.17 1.10 1.33 1.23 1.50 1.42 1.60 1.78 2.03 Part No. EKMS451VSN181MQ35S EKMS451VSN181MR25S EKMS451VSN221MP50S EKMS451VSN221MQ40S EKMS451VSN221MR30S EKMS451VSN221MA25S EKMS451VSN271MQ45S EKMS451VSN271MQ50S EKMS451VSN271MR35S EKMS451VSN271MA30S EKMS451VSN331MR40S EKMS451VSN391MR45S EKMS451VSN391MR50S EKMS451VSN391MA35S EKMS451VSN471MA40S EKMS451VSN471MA45S EKMS451VSN561MA50S EKMS501VSN470MP25S EKMS501VSN560MP30S EKMS501VSN680MQ25S EKMS501VSN820MP35S EKMS501VSN820MQ30S EKMS501VSN101MP45S EKMS501VSN101MR25S EKMS501VSN121MP50S EKMS501VSN121MQ35S EKMS501VSN121MR30S EKMS501VSN151MQ45S EKMS501VSN151MR35S EKMS501VSN151MA25S EKMS501VSN181MQ50S EKMS501VSN181MR40S EKMS501VSN181MA30S EKMS501VSN221MR45S EKMS501VSN221MA35S EKMS501VSN271MR50S EKMS501VSN271MA40S EKMS501VSN331MA45S EKMS501VSN391MA50S EKMS501VSN471MA60S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 500Vdc 50 0.81 0.77 0.70 120 1.00 1.00 1.00 300 1.17 1.16 1.16 1k 1.32 1.30 1.30 10k 1.45 1.41 1.41 50k 1.50 1.43 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 249 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMM LXS P268 Series LXQ P271 Longer life Longer life Longer life from KMQ series Endurance with ripple current : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant KMS P247 Long life snap-ins, 105 KMM Downsized Longer life KMQ P235 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tan(Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z(-25)/Z(+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)for 3,000 hours (2,000 hours for20x20L products) at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (20 to35) : Standard Sleeve (PET : Brown) Negative mark PC board pin-out Negative mark PC board pin-out 2-1.2x6 D+1max. D+1max. 10 L2 Vent 2-2 * 4.00.5 Code : LI (35) Sleeve (PET : Brown) 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 *D=35mm : 3.50.5mm The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E K MM 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120F:121, 1,000F:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 250V:251, 315V:3B1) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 250 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 KMMSeries STANDARD RATINGS WV (Vdc) 160 180 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 180 220 220 270 270 330 330 330 390 390 390 390 470 470 470 470 560 560 560 560 560 680 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 3,300 150 180 180 220 220 270 270 270 330 330 330 330 390 390 390 390 470 470 470 470 470 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x30 22 x25 25.4 x25 30 x20 20 x35 22 x30 25.4 x25 30 x20 20 x40 22 x35 25.4 x30 30 x25 35 x20 20 x45 22 x40 25.4 x30 30 x25 35 x20 22 x45 25.4 x35 30 x30 35 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x30 25.4 x60 30 x40 35 x30 30 x45 35 x35 30 x60 35 x45 35 x50 35 x60 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x30 22 x25 25.4 x25 30 x20 20 x35 22 x30 25.4 x25 30 x20 20 x40 22 x35 25.4 x30 30 x25 35 x20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.68 0.85 0.81 1.10 0.98 1.20 1.20 1.02 1.30 1.30 1.26 1.25 1.34 1.55 1.55 1.30 1.50 1.67 1.67 1.67 1.46 1.70 1.82 1.82 1.82 1.51 2.04 2.04 2.04 2.04 2.25 2.25 2.25 2.25 2.49 2.49 2.49 2.97 2.84 2.84 3.32 3.00 3.86 3.50 4.00 4.63 0.62 0.77 0.80 1.00 0.90 1.10 1.00 0.95 1.20 1.20 1.16 1.15 1.30 1.35 1.35 1.20 1.40 1.50 1.50 1.50 1.36 WV (Vdc) Part No. EKMM161VSN181MN20S EKMM161VSN221MN25S EKMM161VSN221MP20S EKMM161VSN271MN25S EKMM161VSN271MQ20S EKMM161VSN331MN30S EKMM161VSN331MP25S EKMM161VSN331MQ20S EKMM161VSN391MN30S EKMM161VSN391MP25S EKMM161VSN391MQ25S EKMM161VSN391MR20S EKMM161VSN471MN35S EKMM161VSN471MP30S EKMM161VSN471MQ25S EKMM161VSN471MR20S EKMM161VSN561MN40S EKMM161VSN561MP35S EKMM161VSN561MQ30S EKMM161VSN561MR25S EKMM161VSN561MA20S EKMM161VSN681MN45S EKMM161VSN681MP40S EKMM161VSN681MQ30S EKMM161VSN681MR25S EKMM161VSN681MA20S EKMM161VSN821MP45S EKMM161VSN821MQ35S EKMM161VSN821MR30S EKMM161VSN821MA25S EKMM161VSN102MP50S EKMM161VSN102MQ40S EKMM161VSN102MR30S EKMM161VSN102MA25S EKMM161VSN122MQ45S EKMM161VSN122MR35S EKMM161VSN122MA30S EKMM161VSN152MQ60S EKMM161VSN152MR40S EKMM161VSN152MA30S EKMM161VSN182MR45S EKMM161VSN182MA35S EKMM161VSN222MR60S EKMM161VSN222MA45S EKMM161VSN272MA50S EKMM161VSN332MA60S EKMM181VSN151MN20S EKMM181VSN181MN25S EKMM181VSN181MP20S EKMM181VSN221MN25S EKMM181VSN221MQ20S EKMM181VSN271MN30S EKMM181VSN271MP25S EKMM181VSN271MQ20S EKMM181VSN331MN30S EKMM181VSN331MP25S EKMM181VSN331MQ25S EKMM181VSN331MR20S EKMM181VSN391MN35S EKMM181VSN391MP30S EKMM181VSN391MQ25S EKMM181VSN391MR20S EKMM181VSN471MN40S EKMM181VSN471MP35S EKMM181VSN471MQ30S EKMM181VSN471MR25S EKMM181VSN471MA20S 180 200 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 560 560 560 560 560 680 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,700 120 150 150 180 180 220 220 270 270 270 330 330 330 330 390 390 390 390 470 470 470 470 470 560 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 20 x 45 22 x 40 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 60 35 x 40 35 x 50 35 x 60 20 x 20 20 x 25 22 x 20 20 x 25 22 x 20 20 x 25 25.4 x 20 20 x 30 22 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 40 22 x 30 25.4 x 25 35 x 20 20 x 45 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 25.4 x 60 30 x 40 35 x 35 30 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.55 1.67 1.67 1.67 1.43 1.75 1.78 1.78 1.78 1.83 2.04 2.04 2.04 2.04 2.30 2.30 2.30 2.55 2.55 2.55 2.90 2.90 3.49 3.30 3.65 4.19 0.56 0.71 0.73 0.77 0.80 1.00 0.85 1.10 1.10 1.05 1.20 1.25 1.25 1.10 1.31 1.35 1.35 1.30 1.45 1.50 1.50 1.50 1.41 1.58 1.67 1.67 1.67 1.78 1.78 1.78 1.78 2.04 2.04 2.04 2.30 2.30 2.30 2.66 2.65 2.65 3.08 Part No. EKMM181VSN561MN45S EKMM181VSN561MP40S EKMM181VSN561MQ30S EKMM181VSN561MR25S EKMM181VSN561MA20S EKMM181VSN681MN50S EKMM181VSN681MP45S EKMM181VSN681MQ35S EKMM181VSN681MR30S EKMM181VSN681MA25S EKMM181VSN821MP50S EKMM181VSN821MQ40S EKMM181VSN821MR30S EKMM181VSN821MA25S EKMM181VSN102MQ45S EKMM181VSN102MR35S EKMM181VSN102MA30S EKMM181VSN122MQ50S EKMM181VSN122MR40S EKMM181VSN122MA30S EKMM181VSN152MR45S EKMM181VSN152MA35S EKMM181VSN182MR60S EKMM181VSN182MA40S EKMM181VSN222MA50S EKMM181VSN272MA60S EKMM201VSN121MN20S EKMM201VSN151MN25S EKMM201VSN151MP20S EKMM201VSN181MN25S EKMM201VSN181MP20S EKMM201VSN221MN25S EKMM201VSN221MQ20S EKMM201VSN271MN30S EKMM201VSN271MP25S EKMM201VSN271MR20S EKMM201VSN331MN35S EKMM201VSN331MP30S EKMM201VSN331MQ25S EKMM201VSN331MR20S EKMM201VSN391MN40S EKMM201VSN391MP30S EKMM201VSN391MQ25S EKMM201VSN391MA20S EKMM201VSN471MN45S EKMM201VSN471MP35S EKMM201VSN471MQ30S EKMM201VSN471MR25S EKMM201VSN471MA20S EKMM201VSN561MN50S EKMM201VSN561MP40S EKMM201VSN561MQ30S EKMM201VSN561MR25S EKMM201VSN681MP45S EKMM201VSN681MQ35S EKMM201VSN681MR30S EKMM201VSN681MA25S EKMM201VSN821MQ45S EKMM201VSN821MR30S EKMM201VSN821MA25S EKMM201VSN102MQ50S EKMM201VSN102MR35S EKMM201VSN102MA30S EKMM201VSN122MQ60S EKMM201VSN122MR40S EKMM201VSN122MA35S EKMM201VSN152MR50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 251 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 KMMSeries STANDARD RATINGS WV (Vdc) 200 220 250 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 1,500 1,800 1,800 2,200 120 150 150 180 180 220 220 220 270 270 270 270 330 330 330 330 390 390 390 390 390 470 470 470 470 560 560 560 560 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 100 120 120 150 150 180 180 180 220 220 220 220 270 270 270 270 330 330 330 35 x40 30 x60 35 x45 35 x50 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x35 22 x30 25.4 x25 30 x20 20 x40 22 x35 25.4 x25 35 x20 20 x45 22 x35 25.4 x30 30 x25 35 x20 20 x50 22 x40 25.4 x35 30 x25 22 x45 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x25 25.4 x50 30 x40 35 x30 25.4 x60 30 x45 35 x35 30 x50 35 x40 30 x60 35 x45 35 x50 35 x60 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x30 22 x25 25.4 x25 30 x20 20 x35 22 x30 25.4 x25 30 x20 20 x40 22 x35 25.4 x30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.08 3.49 3.48 3.78 0.56 0.73 0.67 0.90 0.76 1.00 1.00 0.84 1.15 1.15 1.08 0.98 1.25 1.25 1.25 1.13 1.40 1.40 1.40 1.36 1.23 1.51 1.51 1.54 1.50 1.70 1.72 1.70 1.71 1.94 1.93 1.89 2.18 2.19 2.16 2.54 2.50 2.44 2.81 2.79 3.30 3.22 3.63 4.23 0.51 0.58 0.60 0.79 0.74 0.90 0.78 0.75 1.00 1.00 0.95 0.95 1.10 1.18 1.18 1.00 1.20 1.30 1.30 WV (Vdc) Part No. EKMM201VSN152MA40S EKMM201VSN182MR60S EKMM201VSN182MA45S EKMM201VSN222MA50S EKMM221VSN121MN20S EKMM221VSN151MN25S EKMM221VSN151MP20S EKMM221VSN181MN25S EKMM221VSN181MQ20S EKMM221VSN221MN30S EKMM221VSN221MP25S EKMM221VSN221MQ20S EKMM221VSN271MN35S EKMM221VSN271MP30S EKMM221VSN271MQ25S EKMM221VSN271MR20S EKMM221VSN331MN40S EKMM221VSN331MP35S EKMM221VSN331MQ25S EKMM221VSN331MA20S EKMM221VSN391MN45S EKMM221VSN391MP35S EKMM221VSN391MQ30S EKMM221VSN391MR25S EKMM221VSN391MA20S EKMM221VSN471MN50S EKMM221VSN471MP40S EKMM221VSN471MQ35S EKMM221VSN471MR25S EKMM221VSN561MP45S EKMM221VSN561MQ40S EKMM221VSN561MR30S EKMM221VSN561MA25S EKMM221VSN681MQ45S EKMM221VSN681MR35S EKMM221VSN681MA25S EKMM221VSN821MQ50S EKMM221VSN821MR40S EKMM221VSN821MA30S EKMM221VSN102MQ60S EKMM221VSN102MR45S EKMM221VSN102MA35S EKMM221VSN122MR50S EKMM221VSN122MA40S EKMM221VSN152MR60S EKMM221VSN152MA45S EKMM221VSN182MA50S EKMM221VSN222MA60S EKMM251VSN101MN20S EKMM251VSN121MN25S EKMM251VSN121MP20S EKMM251VSN151MN25S EKMM251VSN151MQ20S EKMM251VSN181MN30S EKMM251VSN181MP25S EKMM251VSN181MQ20S EKMM251VSN221MN30S EKMM251VSN221MP25S EKMM251VSN221MQ25S EKMM251VSN221MR20S EKMM251VSN271MN35S EKMM251VSN271MP30S EKMM251VSN271MQ25S EKMM251VSN271MR20S EKMM251VSN331MN40S EKMM251VSN331MP35S EKMM251VSN331MQ30S 250 315 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 330 330 390 390 390 390 470 470 470 470 560 560 560 560 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 56 68 68 82 82 100 100 100 120 120 120 120 150 150 150 150 150 180 180 180 180 180 220 220 220 220 220 270 270 270 270 330 330 330 330 390 390 390 470 470 470 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 25.4 x 60 30 x 40 35 x 35 30 x 50 35 x 40 30 x 60 35 x 45 35 x 50 35 x 60 20 x 20 20 x 25 22 x 20 20 x 25 22 x 20 20 x 30 22 x 25 25.4 x 20 20 x 30 22 x 25 25.4 x 20 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 35 x 20 20 x 40 22 x 35 25.4 x 25 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 30 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 25 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.30 1.16 1.45 1.49 1.49 1.49 1.65 1.65 1.65 1.65 1.67 1.80 1.80 1.80 2.00 2.00 2.00 2.20 2.30 2.30 2.47 2.47 2.85 2.60 3.00 3.42 0.38 0.47 0.45 0.64 0.47 0.69 0.61 0.56 0.75 0.75 0.62 0.65 0.82 0.82 0.82 0.70 0.76 0.90 0.92 0.92 0.90 0.85 1.00 1.04 1.04 1.04 0.90 1.16 1.16 1.16 1.15 1.33 1.33 1.33 1.33 1.47 1.47 1.47 1.70 1.70 1.70 Part No. EKMM251VSN331MR25S EKMM251VSN331MA20S EKMM251VSN391MN50S EKMM251VSN391MP40S EKMM251VSN391MQ35S EKMM251VSN391MR25S EKMM251VSN471MP45S EKMM251VSN471MQ35S EKMM251VSN471MR30S EKMM251VSN471MA25S EKMM251VSN561MP50S EKMM251VSN561MQ40S EKMM251VSN561MR30S EKMM251VSN561MA25S EKMM251VSN681MQ50S EKMM251VSN681MR35S EKMM251VSN681MA30S EKMM251VSN821MQ60S EKMM251VSN821MR40S EKMM251VSN821MA35S EKMM251VSN102MR50S EKMM251VSN102MA40S EKMM251VSN122MR60S EKMM251VSN122MA45S EKMM251VSN152MA50S EKMM251VSN182MA60S EKMM3B1VSN560MN20S EKMM3B1VSN680MN25S EKMM3B1VSN680MP20S EKMM3B1VSN820MN25S EKMM3B1VSN820MP20S EKMM3B1VSN101MN30S EKMM3B1VSN101MP25S EKMM3B1VSN101MQ20S EKMM3B1VSN121MN30S EKMM3B1VSN121MP25S EKMM3B1VSN121MQ20S EKMM3B1VSN121MR20S EKMM3B1VSN151MN35S EKMM3B1VSN151MP30S EKMM3B1VSN151MQ25S EKMM3B1VSN151MR20S EKMM3B1VSN151MA20S EKMM3B1VSN181MN40S EKMM3B1VSN181MP35S EKMM3B1VSN181MQ25S EKMM3B1VSN181MR25S EKMM3B1VSN181MA20S EKMM3B1VSN221MN50S EKMM3B1VSN221MP40S EKMM3B1VSN221MQ30S EKMM3B1VSN221MR25S EKMM3B1VSN221MA20S EKMM3B1VSN271MP45S EKMM3B1VSN271MQ35S EKMM3B1VSN271MR25S EKMM3B1VSN271MA25S EKMM3B1VSN331MP50S EKMM3B1VSN331MQ40S EKMM3B1VSN331MR30S EKMM3B1VSN331MA25S EKMM3B1VSN391MQ45S EKMM3B1VSN391MR35S EKMM3B1VSN391MA30S EKMM3B1VSN471MQ50S EKMM3B1VSN471MR40S EKMM3B1VSN471MA30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 252 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 KMMSeries STANDARD RATINGS WV (Vdc) 315 350 400 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 560 560 680 680 820 1,000 47 56 56 68 68 82 82 82 100 100 100 120 120 120 120 150 150 150 150 150 180 180 180 180 220 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 470 560 560 680 680 820 39 47 47 56 56 68 68 68 82 82 82 100 100 100 30 x45 35 x35 30 x50 35 x40 35 x45 35 x60 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x30 22 x25 30 x20 20 x35 22 x30 25.4 x25 30 x20 20 x40 22 x35 25.4 x30 30 x25 35 x20 20 x45 22 x40 25.4 x30 30 x25 20 x50 22 x45 25.4 x35 30 x30 35 x25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30 x35 35 x30 25.4 x50 30 x40 35 x35 25.4 x60 30 x45 35 x35 30 x50 35 x40 30 x60 35 x50 35 x60 20 x20 20 x25 22 x20 20 x25 25.4 x20 20 x30 22 x25 25.4 x20 20 x30 22 x25 30 x20 20 x35 22 x30 25.4 x25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.05 2.05 2.17 2.17 2.20 2.55 0.35 0.43 0.41 0.47 0.46 0.54 0.55 0.51 0.60 0.69 0.60 0.68 0.75 0.75 0.65 0.78 0.82 0.83 0.82 0.76 0.87 0.92 0.92 0.90 1.00 1.05 1.04 1.02 1.04 1.16 1.18 1.17 1.20 1.29 1.34 1.22 1.51 1.51 1.47 1.66 1.65 1.69 1.85 1.90 2.15 1.99 2.31 0.32 0.39 0.37 0.51 0.42 0.56 0.50 0.46 0.64 0.64 0.55 0.70 0.70 0.70 WV (Vdc) Part No. EKMM3B1VSN561MR45S EKMM3B1VSN561MA35S EKMM3B1VSN681MR50S EKMM3B1VSN681MA40S EKMM3B1VSN821MA45S EKMM3B1VSN102MA60S EKMM351VSN470MN20S EKMM351VSN560MN25S EKMM351VSN560MP20S EKMM351VSN680MN25S EKMM351VSN680MQ20S EKMM351VSN820MN30S EKMM351VSN820MP25S EKMM351VSN820MQ20S EKMM351VSN101MN30S EKMM351VSN101MP25S EKMM351VSN101MR20S EKMM351VSN121MN35S EKMM351VSN121MP30S EKMM351VSN121MQ25S EKMM351VSN121MR20S EKMM351VSN151MN40S EKMM351VSN151MP35S EKMM351VSN151MQ30S EKMM351VSN151MR25S EKMM351VSN151MA20S EKMM351VSN181MN45S EKMM351VSN181MP40S EKMM351VSN181MQ30S EKMM351VSN181MR25S EKMM351VSN221MN50S EKMM351VSN221MP45S EKMM351VSN221MQ35S EKMM351VSN221MR30S EKMM351VSN221MA25S EKMM351VSN271MP50S EKMM351VSN271MQ40S EKMM351VSN271MR30S EKMM351VSN271MA25S EKMM351VSN331MQ45S EKMM351VSN331MR35S EKMM351VSN331MA30S EKMM351VSN391MQ50S EKMM351VSN391MR40S EKMM351VSN391MA35S EKMM351VSN471MQ60S EKMM351VSN471MR45S EKMM351VSN471MA35S EKMM351VSN561MR50S EKMM351VSN561MA40S EKMM351VSN681MR60S EKMM351VSN681MA50S EKMM351VSN821MA60S EKMM401VSN390MN20S EKMM401VSN470MN25S EKMM401VSN470MP20S EKMM401VSN560MN25S EKMM401VSN560MQ20S EKMM401VSN680MN30S EKMM401VSN680MP25S EKMM401VSN680MQ20S EKMM401VSN820MN30S EKMM401VSN820MP25S EKMM401VSN820MR20S EKMM401VSN101MN35S EKMM401VSN101MP30S EKMM401VSN101MQ25S 400 420 Cap (F) 100 120 120 120 120 120 150 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 390 470 470 560 560 680 39 47 47 56 56 68 68 68 82 82 82 82 100 100 100 100 120 120 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 270 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 30 x 20 20 x 40 22 x 35 25.4 x 25 30 x 25 35 x 20 20 x 45 22 x 40 25.4 x 30 30 x 25 35 x 20 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 25.4 x 60 30 x 45 35 x 35 30 x 50 35 x 40 30 x 60 35 x 45 35 x 60 20 x 20 20 x 25 22 x 20 20 x 25 25.4 x 20 20 x 30 22 x 25 25.4 x 20 20 x 35 22 x 25 25.4 x 25 30 x 20 20 x 35 22 x 30 25.4 x 25 30 x 20 20 x 40 22 x 35 25.4 x 30 30 x 25 35 x 20 20 x 50 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 45 30 x 35 35 x 25 25.4 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.60 0.75 0.75 0.75 0.73 0.75 0.83 0.88 0.88 0.88 0.80 0.98 0.98 0.98 0.98 1.10 1.10 1.10 1.10 1.22 1.22 1.22 1.44 1.44 1.44 1.51 1.60 1.60 1.90 1.90 2.10 2.12 2.27 0.32 0.39 0.37 0.51 0.42 0.56 0.50 0.46 0.64 0.64 0.58 0.53 0.70 0.70 0.70 0.59 0.75 0.75 0.75 0.73 0.67 0.88 0.88 0.88 0.88 0.95 0.95 0.95 0.94 1.10 1.10 1.10 1.10 1.22 Part No. EKMM401VSN101MR20S EKMM401VSN121MN40S EKMM401VSN121MP35S EKMM401VSN121MQ25S EKMM401VSN121MR25S EKMM401VSN121MA20S EKMM401VSN151MN45S EKMM401VSN151MP40S EKMM401VSN151MQ30S EKMM401VSN151MR25S EKMM401VSN151MA20S EKMM401VSN181MP45S EKMM401VSN181MQ35S EKMM401VSN181MR30S EKMM401VSN181MA25S EKMM401VSN221MP50S EKMM401VSN221MQ40S EKMM401VSN221MR30S EKMM401VSN221MA25S EKMM401VSN271MQ45S EKMM401VSN271MR35S EKMM401VSN271MA30S EKMM401VSN331MQ50S EKMM401VSN331MR40S EKMM401VSN331MA30S EKMM401VSN391MQ60S EKMM401VSN391MR45S EKMM401VSN391MA35S EKMM401VSN471MR50S EKMM401VSN471MA40S EKMM401VSN561MR60S EKMM401VSN561MA45S EKMM401VSN681MA60S EKMM421VSN390MN20S EKMM421VSN470MN25S EKMM421VSN470MP20S EKMM421VSN560MN25S EKMM421VSN560MQ20S EKMM421VSN680MN30S EKMM421VSN680MP25S EKMM421VSN680MQ20S EKMM421VSN820MN35S EKMM421VSN820MP25S EKMM421VSN820MQ25S EKMM421VSN820MR20S EKMM421VSN101MN35S EKMM421VSN101MP30S EKMM421VSN101MQ25S EKMM421VSN101MR20S EKMM421VSN121MN40S EKMM421VSN121MP35S EKMM421VSN121MQ30S EKMM421VSN121MR25S EKMM421VSN121MA20S EKMM421VSN151MN50S EKMM421VSN151MP40S EKMM421VSN151MQ35S EKMM421VSN151MR25S EKMM421VSN181MP45S EKMM421VSN181MQ35S EKMM421VSN181MR30S EKMM421VSN181MA25S EKMM421VSN221MP50S EKMM421VSN221MQ45S EKMM421VSN221MR35S EKMM421VSN221MA25S EKMM421VSN271MQ50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 253 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 KMMSeries STANDARD RATINGS WV (Vdc) 420 450 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 270 270 330 330 330 390 390 470 470 560 680 39 47 56 56 68 68 68 82 82 82 100 100 100 100 30 x40 35 x30 25.4x60 30x45 35x35 30x50 35x40 30x60 35x45 35x50 35x60 20x25 20x25 20x30 22x25 20x35 22x30 25.4x25 20x35 22x30 25.4x25 20x45 22x35 25.4x30 30x25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.22 1.22 1.41 1.45 1.45 1.55 1.55 1.79 1.90 2.15 2.27 0.34 0.39 0.51 0.40 0.56 0.53 0.50 0.64 0.64 0.64 0.69 0.69 0.69 0.64 Part No. EKMM421VSN271MR40S EKMM421VSN271MA30S EKMM421VSN331MQ60S EKMM421VSN331MR45S EKMM421VSN331MA35S EKMM421VSN391MR50S EKMM421VSN391MA40S EKMM421VSN471MR60S EKMM421VSN471MA45S EKMM421VSN561MA50S EKMM421VSN681MA60S EKMM451VSN390MN25S EKMM451VSN470MN25S EKMM451VSN560MN30S EKMM451VSN560MP25S EKMM451VSN680MN35S EKMM451VSN680MP30S EKMM451VSN680MQ25S EKMM451VSN820MN35S EKMM451VSN820MP30S EKMM451VSN820MQ25S EKMM451VSN101MN45S EKMM451VSN101MP35S EKMM451VSN101MQ30S EKMM451VSN101MR25S WV (Vdc) Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 450 120 120 120 120 120 150 150 150 150 180 180 180 220 220 220 270 270 270 330 330 390 390 470 560 20 x 50 22 x 40 25.4 x 30 30 x 25 35 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 45 30 x 35 35 x 30 25.4 x 60 30 x 40 35 x 35 30 x 50 35 x 40 30 x 60 35 x 40 35 x 50 35 x 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.75 0.80 0.80 0.80 0.73 0.88 0.88 0.88 0.75 1.00 1.00 1.00 1.12 1.12 1.12 1.18 1.28 1.28 1.45 1.45 1.51 1.55 1.85 1.91 Part No. EKMM451VSN121MN50S EKMM451VSN121MP40S EKMM451VSN121MQ30S EKMM451VSN121MR25S EKMM451VSN121MA25S EKMM451VSN151MP45S EKMM451VSN151MQ35S EKMM451VSN151MR30S EKMM451VSN151MA25S EKMM451VSN181MP50S EKMM451VSN181MQ40S EKMM451VSN181MR30S EKMM451VSN221MQ45S EKMM451VSN221MR35S EKMM451VSN221MA30S EKMM451VSN271MQ60S EKMM451VSN271MR40S EKMM451VSN271MA35S EKMM451VSN331MR50S EKMM451VSN331MA40S EKMM451VSN391MR60S EKMM451VSN391MA40S EKMM451VSN471MA50S EKMM451VSN561MA60S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 254 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMH Standard snap-ins, 85 SMM P241 Series Downsized Longer life Endurance with ripple current : 2,000 hours at 85 Non solvent resistant type RoHS Compliant SMH SPACIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.02CV or 3mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan(Max.) 0.60 0.50 0.40 0.30 0.25 0.20 0.15 0.15 0.15 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 4 4 3 3 2 2 2 2 Z(-40)/Z(+20) 15 15 15 10 8 6 6 5 5 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] (22 to35) : Standard Negative mark Terminal PC board pin-out Code : LI (35) Sleeve (PET : Black) Negative mark D+1max. D+1max. 10 Vent 2-2 * 4.00.5 L2 Vent *D=35mm : 3.50.5mm PC board pin-out 2-1.2x6 4.20.5 Terminal Code : VS Sleeve (PET : Black) 50.5 L2 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SMH A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820F:821, 3,300F:332) Dummy terminal code Terminal code Voltage code (ex. 6.3V:6R3, 63V:630, 100V:101) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 255 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85 SMHSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (F) 15,000 18,000 18,000 22,000 22,000 27,000 27,000 27,000 33,000 33,000 33,000 39,000 39,000 39,000 39,000 47,000 47,000 47,000 56,000 56,000 56,000 68,000 68,000 82,000 82,000 100,000 12,000 15,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 27,000 27,000 33,000 33,000 33,000 33,000 39,000 39,000 39,000 47,000 47,000 47,000 56,000 56,000 68,000 68,000 82,000 8,200 10,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 22,000 22,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 22 x25 22 x30 25.4 x25 22 x30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x40 25.4 x35 30 x25 22 x50 25.4 x40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x30 25.4 x50 30 x40 35 x30 30 x45 35 x 35 30 x 50 35 x 40 35 x 45 22 x25 22 x30 25.4 x25 22 x35 25.4 x25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x35 30 x30 35 x25 22 x50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x35 35 x30 25.4 x50 30 x40 35 x30 30 x 45 35 x 35 30 x 50 35 x 40 35 x50 22x25 22 x25 22 x30 25.4 x25 22 x35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x25 22 x50 25.4 x40 30 x30 35 x25 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 2.44 2.67 2.70 3.06 3.07 3.49 3.52 3.57 3.97 4.02 3.95 4.55 4.50 4.45 4.51 5.09 5.06 5.01 5.71 5.70 5.77 6.48 6.42 7.32 7.29 8.31 2.39 2.76 2.77 3.12 3.04 3.55 3.48 3.53 4.04 3.98 3.73 3.73 4.58 4.54 4.13 4.13 5.08 5.05 4.80 5.73 5.72 5.27 6.44 6.38 7.27 7.27 8.49 2.51 2.77 2.86 2.95 3.29 3.46 3.66 3.72 3.98 4.00 4.37 4.26 4.21 4.15 WV (Vdc) Part No. ESMH6R3VSN153MP25S ESMH6R3VSN183MP30S ESMH6R3VSN183MQ25S ESMH6R3VSN223MP30S ESMH6R3VSN223MQ25S ESMH6R3VSN273MP35S ESMH6R3VSN273MQ30S ESMH6R3VSN273MR25S ESMH6R3VSN333MP40S ESMH6R3VSN333MQ35S ESMH6R3VSN333MR25S ESMH6R3VSN393MP50S ESMH6R3VSN393MQ40S ESMH6R3VSN393MR30S ESMH6R3VSN393MA25S ESMH6R3VSN473MQ45S ESMH6R3VSN473MR35S ESMH6R3VSN473MA30S ESMH6R3VSN563MQ50S ESMH6R3VSN563MR40S ESMH6R3VSN563MA30S ESMH6R3VSN683MR45S ESMH6R3VSN683MA35S ESMH6R3VSN823MR50S ESMH6R3VSN823MA40S ESMH6R3VSN104MA45S ESMH100VSN123MP25S ESMH100VSN153MP30S ESMH100VSN153MQ25S ESMH100VSN183MP35S ESMH100VSN183MQ25S ESMH100VSN223MP40S ESMH100VSN223MQ30S ESMH100VSN223MR25S ESMH100VSN273MP45S ESMH100VSN273MQ35S ESMH100VSN273MR30S ESMH100VSN273MA25S ESMH100VSN333MP50S ESMH100VSN333MQ40S ESMH100VSN333MR30S ESMH100VSN333MA25S ESMH100VSN393MQ45S ESMH100VSN393MR35S ESMH100VSN393MA30S ESMH100VSN473MQ50S ESMH100VSN473MR40S ESMH100VSN473MA30S ESMH100VSN563MR45S ESMH100VSN563MA35S ESMH100VSN683MR50S ESMH100VSN683MA40S ESMH100VSN823MA50S ESMH160VSN822MP25S ESMH160VSN103MP25S ESMH160VSN123MP30S ESMH160VSN123MQ25S ESMH160VSN153MP35S ESMH160VSN153MQ30S ESMH160VSN153MR25S ESMH160VSN183MP40S ESMH160VSN183MQ35S ESMH160VSN183MR25S ESMH160VSN223MP50S ESMH160VSN223MQ40S ESMH160VSN223MR30S ESMH160VSN223MA25S 16 25 35 50 Cap (F) 27,000 27,000 27,000 33,000 33,000 33,000 39,000 39,000 47,000 47,000 56,000 68,000 5,600 6,800 6,800 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 12,000 15,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 33,000 39,000 3,900 4,700 4,700 5,600 5,600 6,800 6,800 6,800 8,200 8,200 8,200 8,200 10,000 10,000 10,000 10,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 22,000 22,000 27,000 2,200 3,300 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 35 30 x 45 35 x 40 30 x 50 35 x 45 35 x 50 22 x 25 22 x 30 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 4.72 4.82 4.65 5.33 5.36 5.15 6.01 5.95 6.79 6.76 7.62 8.63 2.21 2.40 2.56 2.72 2.80 3.09 3.12 3.21 3.48 3.43 3.86 3.54 4.00 3.95 4.00 3.95 4.45 4.46 4.63 5.02 5.21 5.16 5.94 5.92 6.75 7.56 2.22 2.41 2.42 2.75 2.64 2.80 2.74 2.97 3.47 3.10 3.13 2.73 3.57 3.53 3.46 3.02 3.98 4.01 4.42 4.54 4.52 5.01 4.71 5.54 5.33 6.04 6.89 1.91 2.37 Part No. ESMH160VSN273MQ45S ESMH160VSN273MR35S ESMH160VSN273MA30S ESMH160VSN333MQ50S ESMH160VSN333MR40S ESMH160VSN333MA30S ESMH160VSN393MR45S ESMH160VSN393MA35S ESMH160VSN473MR50S ESMH160VSN473MA40S ESMH160VSN563MA45S ESMH160VSN683MA50S ESMH250VSN562MP25S ESMH250VSN682MP30S ESMH250VSN682MQ25S ESMH250VSN822MP35S ESMH250VSN822MQ25S ESMH250VSN103MP40S ESMH250VSN103MQ30S ESMH250VSN103MR25S ESMH250VSN123MP45S ESMH250VSN123MQ35S ESMH250VSN123MR30S ESMH250VSN123MA25S ESMH250VSN153MP50S ESMH250VSN153MQ40S ESMH250VSN153MR30S ESMH250VSN153MA25S ESMH250VSN183MQ45S ESMH250VSN183MR35S ESMH250VSN183MA30S ESMH250VSN223MQ50S ESMH250VSN223MR45S ESMH250VSN223MA35S ESMH250VSN273MR50S ESMH250VSN273MA40S ESMH250VSN333MA45S ESMH250VSN393MA50S ESMH350VSN392MP25S ESMH350VSN472MP30S ESMH350VSN472MQ25S ESMH350VSN562MP35S ESMH350VSN562MQ25S ESMH350VSN682MP40S ESMH350VSN682MQ30S ESMH350VSN682MR25S ESMH350VSN822MP45S ESMH350VSN822MQ35S ESMH350VSN822MR30S ESMH350VSN822MA25S ESMH350VSN103MP50S ESMH350VSN103MQ40S ESMH350VSN103MR30S ESMH350VSN103MA25S ESMH350VSN123MQ45S ESMH350VSN123MR35S ESMH350VSN123MA30S ESMH350VSN153MQ50S ESMH350VSN153MR40S ESMH350VSN153MA35S ESMH350VSN183MR45S ESMH350VSN183MA40S ESMH350VSN223MR50S ESMH350VSN223MA45S ESMH350VSN273MA50S ESMH500VSN222MP25S ESMH500VSN332MP30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 256 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85 SMHSeries STANDARD RATINGS WV (Vdc) 50 63 Cap (F) 3,300 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 5,600 5,600 6,800 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 12,000 12,000 15,000 18,000 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,300 3,900 3,900 3,900 3,900 4,700 4,700 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 25.4x 25 22x 35 25.4x 30 30x 25 22x 40 25.4x 35 30x 25 22x 45 25.4x 35 30x 30 35x 25 22x 50 25.4x 40 30x 35 35x 30 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 35x 50 22x 25 22x 30 25.4x 25 22x 35 25.4x 25 22x 35 25.4x 30 30x 25 22x 40 25.4x 35 30x 30 35x 25 22x 50 25.4x 40 30x 30 35x 25 25.4x 45 30x 35 35x 30 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.38 2.65 2.68 2.55 2.99 3.03 2.81 3.36 3.31 3.37 3.42 3.81 3.81 3.85 3.85 4.37 4.36 4.41 4.97 4.92 5.60 5.58 6.44 6.71 1.82 2.31 2.30 2.40 2.40 2.62 2.64 2.78 2.93 2.97 3.00 3.00 3.39 3.36 3.32 3.36 3.77 3.75 3.76 4.27 4.27 4.15 4.83 4.79 5.49 5.47 6.19 Part No. ESMH500VSN332MQ25S ESMH500VSN392MP35S ESMH500VSN392MQ30S ESMH500VSN392MR25S ESMH500VSN472MP40S ESMH500VSN472MQ35S ESMH500VSN472MR25S ESMH500VSN562MP45S ESMH500VSN562MQ35S ESMH500VSN562MR30S ESMH500VSN562MA25S ESMH500VSN682MP50S ESMH500VSN682MQ40S ESMH500VSN682MR35S ESMH500VSN682MA30S ESMH500VSN822MQ50S ESMH500VSN822MR40S ESMH500VSN822MA30S ESMH500VSN103MR45S ESMH500VSN103MA35S ESMH500VSN123MR50S ESMH500VSN123MA40S ESMH500VSN153MA45S ESMH500VSN183MA50S ESMH630VSN182MP25S ESMH630VSN222MP30S ESMH630VSN222MQ25S ESMH630VSN272MP35S ESMH630VSN272MQ25S ESMH630VSN332MP35S ESMH630VSN332MQ30S ESMH630VSN332MR25S ESMH630VSN392MP40S ESMH630VSN392MQ35S ESMH630VSN392MR30S ESMH630VSN392MA25S ESMH630VSN472MP50S ESMH630VSN472MQ40S ESMH630VSN472MR30S ESMH630VSN472MA25S ESMH630VSN562MQ45S ESMH630VSN562MR35S ESMH630VSN562MA30S ESMH630VSN682MQ50S ESMH630VSN682MR40S ESMH630VSN682MA30S ESMH630VSN822MR45S ESMH630VSN822MA35S ESMH630VSN103MR50S ESMH630VSN103MA40S ESMH630VSN123MA45S WV (Vdc) 80 100 Cap (F) 1,200 1,500 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,300 3,900 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 820 1,200 1,200 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,200 2,700 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 22 x 25 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 22 x 50 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 22 x 50 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.69 1.88 2.14 2.26 2.44 2.46 2.49 2.78 2.81 2.75 3.16 3.21 3.17 3.21 3.52 3.59 3.57 3.50 4.05 4.05 4.09 4.55 4.51 5.16 5.14 5.83 6.63 1.86 2.09 2.10 2.41 2.43 2.46 2.71 2.75 2.72 3.08 3.13 3.09 3.14 3.53 3.57 3.55 3.71 4.06 4.05 4.05 4.54 4.49 5.13 5.11 5.75 6.50 Part No. ESMH800VSN122MP25S ESMH800VSN152MP25S ESMH800VSN182MP30S ESMH800VSN182MQ25S ESMH800VSN222MP35S ESMH800VSN222MQ30S ESMH800VSN222MR25S ESMH800VSN272MP40S ESMH800VSN272MQ35S ESMH800VSN272MR25S ESMH800VSN332MP45S ESMH800VSN332MQ40S ESMH800VSN332MR30S ESMH800VSN332MA25S ESMH800VSN392MP50S ESMH800VSN392MQ45S ESMH800VSN392MR35S ESMH800VSN392MA25S ESMH800VSN472MQ50S ESMH800VSN472MR40S ESMH800VSN472MA30S ESMH800VSN562MR45S ESMH800VSN562MA35S ESMH800VSN682MR50S ESMH800VSN682MA40S ESMH800VSN822MA45S ESMH800VSN103MA50S ESMH101VSN821MP25S ESMH101VSN122MP30S ESMH101VSN122MQ25S ESMH101VSN152MP35S ESMH101VSN152MQ30S ESMH101VSN152MR25S ESMH101VSN182MP40S ESMH101VSN182MQ35S ESMH101VSN182MR25S ESMH101VSN222MP45S ESMH101VSN222MQ40S ESMH101VSN222MR30S ESMH101VSN222MA25S ESMH101VSN272MP50S ESMH101VSN272MQ45S ESMH101VSN272MR35S ESMH101VSN272MA30S ESMH101VSN332MQ50S ESMH101VSN332MR40S ESMH101VSN332MA30S ESMH101VSN392MR45S ESMH101VSN392MA35S ESMH101VSN472MR50S ESMH101VSN472MA40S ESMH101VSN562MA45S ESMH101VSN682MA50S *For the rated voltage160Vdc, please use SMQ series RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 6.3 to 50Vdc 63 to 100Vdc 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 50k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 257 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMH Standard snap-ins, 105 KMM P250 Series Downsized Longer life Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant KMH SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 6.3 to 100Vdc (at 20, 120Hz) 20% (M) I=0.02CV or 3mA, whichever is smaller Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tan (Max.) 0.60 0.50 0.40 0.30 0.25 0.20 0.15 0.15 0.15 (at 20, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25)/Z(+20) 4 4 4 3 3 2 2 2 2 Z(-45)/Z(+20) 15 15 15 10 8 6 6 5 5 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105 Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] (22 to35) : Standard Negative mark Terminal PC board pin-out Code : LI (35) Sleeve (PET : Brown) Negative mark D+1max. D+1max. 10 2-2 * 4.00.5 L2 Vent Vent *D=35mm : 3.50.5mm PC board pin-out 2-1.2x6 4.20.5 Terminal Code : VS Sleeve (PET : Brown) 50.5 L2 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E KMH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820F:821, 3,300F:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 258 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105 KMHSeries STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (F) 12,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 27,000 33,000 33,000 33,000 33,000 39,000 39,000 39,000 47,000 47,000 47,000 56,000 56,000 68,000 68,000 82,000 10,000 12,000 15,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 27,000 27,000 33,000 33,000 33,000 39,000 39,000 39,000 47,000 47,000 56,000 56,000 68,000 6,800 10,000 10,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 22x 25 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 30x 25 22x 40 25.4x 35 30x 25 22x 45 25.4x 40 30x 30 35x 25 25.4x 40 30x 35 35x 30 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 22x 25 22x 30 22x 30 25.4x 25 22x 35 25.4x 30 22x 40 25.4x 35 30x 25 22x 50 25.4x 40 30x 30 35x 25 25.4x 45 30x 35 35x 30 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 50 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 30x 25 22x 40 25.4x 35 30x 25 22x 45 25.4x 40 30x 30 35x 25 25.4x 45 30x 35 35x 25 25.4x 50 30x 40 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 1.54 1.72 1.95 1.96 2.23 2.25 2.28 2.54 2.57 2.52 2.88 2.93 2.89 2.93 3.18 3.26 3.40 3.69 3.69 3.73 4.16 4.12 4.71 4.69 5.32 1.55 1.77 1.97 1.96 2.21 2.23 2.51 2.54 2.40 2.93 2.90 2.87 2.73 3.30 3.28 3.16 3.68 3.69 3.43 4.17 3.76 4.68 4.67 5.46 1.57 1.97 1.97 2.22 2.24 2.45 2.55 2.58 2.52 2.87 2.92 2.88 2.92 3.32 3.29 3.23 3.78 3.77 WV (Vdc) Part No. EKMH6R3VSN123MP25S EKMH6R3VSN153MP25S EKMH6R3VSN183MP30S EKMH6R3VSN183MQ25S EKMH6R3VSN223MP35S EKMH6R3VSN223MQ30S EKMH6R3VSN223MR25S EKMH6R3VSN273MP40S EKMH6R3VSN273MQ35S EKMH6R3VSN273MR25S EKMH6R3VSN333MP45S EKMH6R3VSN333MQ40S EKMH6R3VSN333MR30S EKMH6R3VSN333MA25S EKMH6R3VSN393MQ40S EKMH6R3VSN393MR35S EKMH6R3VSN393MA30S EKMH6R3VSN473MQ50S EKMH6R3VSN473MR40S EKMH6R3VSN473MA30S EKMH6R3VSN563MR45S EKMH6R3VSN563MA35S EKMH6R3VSN683MR50S EKMH6R3VSN683MA40S EKMH6R3VSN823MA45S EKMH100VSN103MP25S EKMH100VSN123MP30S EKMH100VSN153MP30S EKMH100VSN153MQ25S EKMH100VSN183MP35S EKMH100VSN183MQ30S EKMH100VSN223MP40S EKMH100VSN223MQ35S EKMH100VSN223MR25S EKMH100VSN273MP50S EKMH100VSN273MQ40S EKMH100VSN273MR30S EKMH100VSN273MA25S EKMH100VSN333MQ45S EKMH100VSN333MR35S EKMH100VSN333MA30S EKMH100VSN393MQ50S EKMH100VSN393MR40S EKMH100VSN393MA30S EKMH100VSN473MR45S EKMH100VSN473MA35S EKMH100VSN563MR50S EKMH100VSN563MA40S EKMH100VSN683MA50S EKMH160VSN682MP25S EKMH160VSN103MP30S EKMH160VSN103MQ25S EKMH160VSN123MP35S EKMH160VSN123MQ30S EKMH160VSN123MR25S EKMH160VSN153MP40S EKMH160VSN153MQ35S EKMH160VSN153MR25S EKMH160VSN183MP45S EKMH160VSN183MQ40S EKMH160VSN183MR30S EKMH160VSN183MA25S EKMH160VSN223MQ45S EKMH160VSN223MR35S EKMH160VSN223MA25S EKMH160VSN273MQ50S EKMH160VSN273MR40S 16 25 35 50 Cap (F) 27,000 33,000 33,000 39,000 39,000 47,000 4,700 5,600 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 27,000 33,000 3,300 3,900 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 15,000 15,000 18,000 22,000 1,800 2,700 2,700 3,300 3,300 3,900 3,900 3,900 4,700 4,700 4,700 4,700 5,600 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 35 x 45 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 0.40 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.45 4.30 4.26 4.81 4.79 5.43 1.50 1.63 1.86 1.87 2.11 2.12 2.15 2.39 2.42 2.37 2.69 2.74 2.70 2.74 3.15 3.13 3.27 3.54 3.54 3.58 4.04 3.64 4.73 5.39 1.40 1.57 1.72 1.80 1.95 1.96 1.99 2.20 2.23 2.19 2.55 2.53 2.75 2.75 2.87 2.90 2.91 3.24 3.23 2.99 3.72 3.67 4.37 4.92 1.33 1.69 1.70 1.93 1.85 2.16 2.18 1.95 2.43 2.39 2.25 2.48 2.75 Part No. EKMH160VSN273MA30S EKMH160VSN333MR45S EKMH160VSN333MA35S EKMH160VSN393MR50S EKMH160VSN393MA40S EKMH160VSN473MA45S EKMH250VSN472MP25S EKMH250VSN562MP25S EKMH250VSN682MP30S EKMH250VSN682MQ25S EKMH250VSN822MP35S EKMH250VSN822MQ30S EKMH250VSN822MR25S EKMH250VSN103MP40S EKMH250VSN103MQ35S EKMH250VSN103MR25S EKMH250VSN123MP45S EKMH250VSN123MQ40S EKMH250VSN123MR30S EKMH250VSN123MA25S EKMH250VSN153MQ45S EKMH250VSN153MR35S EKMH250VSN153MA30S EKMH250VSN183MQ50S EKMH250VSN183MR40S EKMH250VSN183MA30S EKMH250VSN223MR45S EKMH250VSN223MA35S EKMH250VSN273MA45S EKMH250VSN333MA50S EKMH350VSN332MP25S EKMH350VSN392MP30S EKMH350VSN472MP30S EKMH350VSN472MQ25S EKMH350VSN562MP35S EKMH350VSN562MQ30S EKMH350VSN562MR25S EKMH350VSN682MP40S EKMH350VSN682MQ35S EKMH350VSN682MR25S EKMH350VSN822MP50S EKMH350VSN822MQ40S EKMH350VSN822MR30S EKMH350VSN822MA25S EKMH350VSN103MQ45S EKMH350VSN103MR35S EKMH350VSN103MA30S EKMH350VSN123MQ50S EKMH350VSN123MR40S EKMH350VSN123MA30S EKMH350VSN153MR45S EKMH350VSN153MA35S EKMH350VSN183MA40S EKMH350VSN223MA50S EKMH500VSN182MP25S EKMH500VSN272MP30S EKMH500VSN272MQ25S EKMH500VSN332MP35S EKMH500VSN332MQ30S EKMH500VSN392MP40S EKMH500VSN392MQ35S EKMH500VSN392MR25S EKMH500VSN472MP45S EKMH500VSN472MQ35S EKMH500VSN472MR30S EKMH500VSN472MA25S EKMH500VSN562MP50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 259 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105 KMHSeries STANDARD RATINGS WV (Vdc) 50 63 80 Cap (F) 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,300 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 820 1,000 1,200 1,200 1,500 1,500 1,800 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 25.4x 40 30x 35 35x 25 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 22x 25 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 22x 40 25.4x 35 30x 25 22x 50 25.4x 40 30x 30 35x 25 25.4x 45 30x 35 35x 25 25.4x 50 30x 40 35x 30 30x 45 35x 35 30x 50 35x 40 35x 45 35x 50 22x 25 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 22x 40 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.70 2.76 2.70 3.30 3.30 3.25 3.60 3.55 4.04 4.03 4.55 1.19 1.33 1.51 1.52 1.73 1.74 1.97 1.99 1.76 2.29 2.27 2.24 2.06 2.54 2.55 2.24 2.86 2.86 2.79 3.22 3.19 3.65 3.64 3.90 4.40 1.11 1.22 1.38 1.39 1.59 1.61 1.80 Part No. EKMH500VSN562MQ40S EKMH500VSN562MR35S EKMH500VSN562MA25S EKMH500VSN682MQ50S EKMH500VSN682MR40S EKMH500VSN682MA30S EKMH500VSN822MR45S EKMH500VSN822MA35S EKMH500VSN103MR50S EKMH500VSN103MA40S EKMH500VSN123MA45S EKMH630VSN122MP25S EKMH630VSN152MP25S EKMH630VSN182MP30S EKMH630VSN182MQ25S EKMH630VSN222MP35S EKMH630VSN222MQ30S EKMH630VSN272MP40S EKMH630VSN272MQ35S EKMH630VSN272MR25S EKMH630VSN332MP50S EKMH630VSN332MQ40S EKMH630VSN332MR30S EKMH630VSN332MA25S EKMH630VSN392MQ45S EKMH630VSN392MR35S EKMH630VSN392MA25S EKMH630VSN472MQ50S EKMH630VSN472MR40S EKMH630VSN472MA30S EKMH630VSN562MR45S EKMH630VSN562MA35S EKMH630VSN682MR50S EKMH630VSN682MA40S EKMH630VSN822MA45S EKMH630VSN103MA50S EKMH800VSN821MP25S EKMH800VSN102MP25S EKMH800VSN122MP30S EKMH800VSN122MQ25S EKMH800VSN152MP35S EKMH800VSN152MQ30S EKMH800VSN182MP40S WV (Vdc) 80 100 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 1,800 1,800 2,200 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 560 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 35 30 x 25 22 x 45 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.76 1.65 2.04 2.01 2.05 2.07 2.36 2.35 2.29 2.68 2.68 2.45 3.00 2.98 3.39 3.38 3.80 3.90 1.05 1.32 1.33 1.50 1.51 1.69 1.71 1.68 1.94 1.98 1.95 1.98 2.23 2.50 2.17 2.53 2.70 2.50 2.88 2.86 3.28 3.27 3.67 3.80 Part No. EKMH800VSN182MQ30S EKMH800VSN182MR25S EKMH800VSN222MP45S EKMH800VSN222MQ35S EKMH800VSN222MR30S EKMH800VSN222MA25S EKMH800VSN272MQ45S EKMH800VSN272MR35S EKMH800VSN272MA25S EKMH800VSN332MQ50S EKMH800VSN332MR40S EKMH800VSN332MA30S EKMH800VSN392MR45S EKMH800VSN392MA35S EKMH800VSN472MR50S EKMH800VSN472MA40S EKMH800VSN562MA45S EKMH800VSN682MA50S EKMH101VSN561MP25S EKMH101VSN821MP30S EKMH101VSN821MQ25S EKMH101VSN102MP35S EKMH101VSN102MQ30S EKMH101VSN122MP40S EKMH101VSN122MQ35S EKMH101VSN122MR25S EKMH101VSN152MP45S EKMH101VSN152MQ40S EKMH101VSN152MR30S EKMH101VSN152MA25S EKMH101VSN182MQ45S EKMH101VSN182MR35S EKMH101VSN182MA25S EKMH101VSN222MQ50S EKMH101VSN222MR40S EKMH101VSN222MA30S EKMH101VSN272MR45S EKMH101VSN272MA35S EKMH101VSN332MR50S EKMH101VSN332MA40S EKMH101VSN392MA45S EKMH101VSN472MA50S *For the rated voltage160Vdc, please use KMR and KMQ series. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 6.3 to 50Vdc 63 to 100Vdc 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 50k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 260 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SLM 15mm height snap-ins, 85 SLM Series 15mm height snap-ins Endurance with ripple current : 2,000 hours at 85 Non solvent resistant type RoHS Compliant Low profile SMQ P227 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 160 to 400Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V tan (Max.) 0.20 Rated voltage (Vdc) 160 to 400V Z (-25)/Z (+20) 4 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurace Shelf Life DIMENSIONS [mm] Terminal Code : VS Sleeve (PET : Black) Negative mark PC board pin-out D+1max. 10 2-2 4.00.5 L2 Vent The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E S LM 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 RATED RIPPLE CURRENT MULTIPLIERS 18 Frequency S Multipliers Frequency (Hz) 160 to 250Vdc 400Vdc Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 330F:331) Dummy terminal code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (snap-in type)" STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 180 270 390 560 150 220 330 470 150 220 22 x15 25.4 x15 30x15 35 x15 22x15 25.4x15 30x15 35x15 22x15 25.4x15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.99 1.29 1.47 1.74 0.90 1.16 1.35 1.60 0.90 1.16 Part No. ESLM161VSN181MP15S ESLM161VSN271MQ15S ESLM161VSN391MR15S ESLM161VSN561MA15S ESLM181VSN151MP15S ESLM181VSN221MQ15S ESLM181VSN331MR15S ESLM181VSN471MA15S ESLM201VSN151MP15S ESLM201VSN221MQ15S WV (Vdc) 200 250 400 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 270 390 100 150 220 330 47 68 100 120 30 x 15 35 x 15 22 x 15 25.4 x 15 30 x 15 35 x 15 22 x 15 25.4 x 15 30 x 15 35 x 15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.22 1.46 0.73 0.96 1.10 1.34 0.50 0.65 0.74 0.81 Part No. ESLM201VSN271MR15S ESLM201VSN391MA15S ESLM251VSN101MP15S ESLM251VSN151MQ15S ESLM251VSN221MR15S ESLM251VSN331MA15S ESLM401VSN470MP15S ESLM401VSN680MQ15S ESLM401VSN101MR15S ESLM401VSN121MA15S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 261 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KLM 15mm height snap-ins, 105 KLM Series 15mm height snap-ins Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant Low profile KMQ P235 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105 160 to 400Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V tan (Max.) 0.20 Rated voltage (Vdc) 160 to 400V Z (-25)/Z (+20) 4 1 2 3 4 E KLM Negative mark 5 6 7 8 9 PC board pin-out D+1max. 10 STANDARD RATINGS 160 180 200 12 13 14 M 15 16 17 18 S Please refer to "Product code guide (snap-in type)" Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 150 180 220 270 330 390 120 150 180 220 270 330 390 120 150 180 22 x15 25.4 x15 25.4x15 30x15 30x15 35x15 22x15 25.4x15 25.4x15 30x15 30x15 35x15 35x15 22x15 25.4x15 30x15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 11 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 100F:101) Dummy terminal code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category 2-2 4.00.5 L2 10 VS N The standard design has no plastic disc. WV (Vdc) (at 20, 120Hz) PART NUMBERING SYSTEM Code : VS Sleeve (PET : Brown) Vent (at 20 after 5 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value DIMENSIONS [mm] Terminal (at 20, 120Hz) 0.68 0.79 0.88 0.96 1.06 1.20 0.61 0.73 0.79 0.86 0.96 1.10 1.17 0.61 0.73 0.79 WV (Vdc) Part No. EKLM161VSN151MP15S EKLM161VSN181MQ15S EKLM161VSN221MQ15S EKLM161VSN271MR15S EKLM161VSN331MR15S EKLM161VSN391MA15S EKLM181VSN121MP15S EKLM181VSN151MQ15S EKLM181VSN181MQ15S EKLM181VSN221MR15S EKLM181VSN271MR15S EKLM181VSN331MA15S EKLM181VSN391MA15S EKLM201VSN121MP15S EKLM201VSN151MQ15S EKLM201VSN181MR15S 200 250 400 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 220 270 330 82 100 120 150 180 220 39 47 56 68 82 100 120 30 x 15 35 x 15 35 x 15 22 x 15 25.4 x 15 25.4 x 15 30 x 15 30 x 15 35 x 15 22 x 15 25.4 x 15 25.4 x 15 30 x 15 30 x 15 35 x 15 35 x 15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.90 1.00 1.07 0.50 0.59 0.65 0.71 0.79 0.90 0.35 0.40 0.44 0.46 0.51 0.56 0.62 Part No. EKLM201VSN221MR15S EKLM201VSN271MA15S EKLM201VSN331MA15S EKLM251VSN820MP15S EKLM251VSN101MQ15S EKLM251VSN121MQ15S EKLM251VSN151MR15S EKLM251VSN181MR15S EKLM251VSN221MA15S EKLM401VSN390MP15S EKLM401VSN470MQ15S EKLM401VSN560MQ15S EKLM401VSN680MR15S EKLM401VSN820MR15S EKLM401VSN101MA15S EKLM401VSN121MA15S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 400Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 262 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS TXH Long life snap-ins, 105 TXH Series Endurance with ripple current : 10,000 hours at 105 Non solvent resistant type RoHS Compliant Longer life LXM P265 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 200 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 200 to 400V 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 200 to 400V 450V Z (-25)/Z (+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (30 to40) : Standard Sleeve (PET : Brown) Terminal Code : LI (35,40) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 L2 Vent 2-2 *4.00.5 Vent *D=40mm : 3.50.5mm PC board pin-out 2-1.2x6 4.20.5 Terminal 50.5 L2 ** 4.51 14.21 **D=40mm : 4.01 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E T XH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470F:471, 1,000F:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 200V:201 , 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 263 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 TXHSeries STANDARD RATINGS WV (Vdc) 200 250 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 390 470 560 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 30 x30 30 x35 30 x40 35 x30 30 x45 35 x35 40 x30 35 x40 40 x35 35 x50 40 x40 40 x50 30 x30 30 x35 35 x30 30 x45 35 x35 30 x50 35 x40 40 x30 35 x45 40 x35 35 x50 40 x40 40 x50 40 x60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.50 1.70 2.00 2.00 2.20 2.20 2.17 2.40 2.45 2.81 2.79 3.24 1.30 1.42 1.58 1.80 1.76 2.03 2.01 1.96 2.30 2.27 2.55 2.53 2.96 3.39 WV (Vdc) Part No. ETXH201VSN561MR30S ETXH201VSN681MR35S ETXH201VSN821MR40S ETXH201VSN821MA30S ETXH201VSN102MR45S ETXH201VSN102MA35S ETXH201VSN102MB30S ETXH201VSN122MA40S ETXH201VSN122MB35S ETXH201VSN152MA50S ETXH201VSN152MB40S ETXH201VSN182MB50S ETXH251VSN391MR30S ETXH251VSN471MR35S ETXH251VSN561MA30S ETXH251VSN681MR45S ETXH251VSN681MA35S ETXH251VSN821MR50S ETXH251VSN821MA40S ETXH251VSN821MB30S ETXH251VSN102MA45S ETXH251VSN102MB35S ETXH251VSN122MA50S ETXH251VSN122MB40S ETXH251VSN152MB50S ETXH251VSN182MB60S 400 450 Cap (F) 220 270 270 330 330 330 390 390 470 470 560 560 680 820 220 220 270 270 330 330 390 470 560 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 40 x 30 30 x 50 35 x 40 35 x 45 40 x 35 35 x 50 40 x 40 40 x 50 40 x 60 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 40 x 60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.00 1.15 1.13 1.29 1.26 1.28 1.44 1.43 1.60 1.58 1.79 1.78 2.05 2.36 1.04 1.02 1.19 1.16 1.33 1.32 1.48 1.64 1.98 Part No. ETXH401VSN221MR35S ETXH401VSN271MR40S ETXH401VSN271MA30S ETXH401VSN331MR45S ETXH401VSN331MA35S ETXH401VSN331MB30S ETXH401VSN391MR50S ETXH401VSN391MA40S ETXH401VSN471MA45S ETXH401VSN471MB35S ETXH401VSN561MA50S ETXH401VSN561MB40S ETXH401VSN681MB50S ETXH401VSN821MB60S ETXH451VSN221MR40S ETXH451VSN221MA30S ETXH451VSN271MR45S ETXH451VSN271MA35S ETXH451VSN331MR50S ETXH451VSN331MA40S ETXH451VSN391MA45S ETXH451VSN471MA50S ETXH451VSN561MB60S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 200, 250Vdc 400, 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 264 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LXM Long life snap-ins, 105 LXM Series Endurance with ripple current : 7,000 hours at 105 Non solvent resistant type RoHS Compliant Longer life LXQ P271 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z (-25)/Z (+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 7,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 250% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to35) : Standard Sleeve (PET : Brown) Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark Negative mark D+1max. D+1max. 10 L2 Vent 2-2 *4.00.5 PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 *D=35mm : 3.50.5mm The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E L XM 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47F:470, 2,200F:222) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 265 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXMSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 330 390 470 470 560 560 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 270 330 390 390 470 470 560 560 560 680 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 220 270 330 330 390 390 470 470 470 560 560 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,800 22 x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x40 25.4 x35 30 x25 22 x50 25.4 x40 30 x30 25.4 x45 30 x35 25.4 x50 30 x40 35 x30 30 x45 35 x35 30 x50 35 x40 35 x50 22 x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x40 25.4 x30 30 x25 22 x45 25.4 x35 30 x30 25.4 x40 30 x35 25.4 x50 30 x35 35 x30 30 x45 35 x35 30 x50 35 x40 35 x45 35 x50 22 x25 22 x30 22 x30 25.4 x25 22 x35 25.4 x30 22 x40 25.4 x30 30 x25 22 x45 25.4 x35 30 x30 25.4 x40 30 x30 25.4 x45 30 x35 30 x45 35 x30 30 x50 35 x40 35 x45 35 x50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.11 1.26 1.39 1.38 1.55 1.55 1.75 1.78 1.74 1.97 2.01 1.96 2.27 2.26 2.54 2.56 2.52 2.96 2.89 3.32 3.30 3.87 1.00 1.16 1.26 1.26 1.42 1.42 1.59 1.55 1.58 1.79 1.78 1.79 2.01 2.04 2.32 2.26 2.30 2.65 2.58 3.03 3.01 3.41 3.87 0.90 1.05 1.16 1.16 1.29 1.29 1.46 1.42 1.45 1.63 1.62 1.62 1.83 1.79 2.06 2.04 2.42 2.30 2.71 2.70 3.11 3.50 WV (Vdc) Part No. ELXM161VSN331MP25S ELXM161VSN391MP30S ELXM161VSN471MP30S ELXM161VSN471MQ25S ELXM161VSN561MP35S ELXM161VSN561MQ30S ELXM161VSN681MP40S ELXM161VSN681MQ35S ELXM161VSN681MR25S ELXM161VSN821MP50S ELXM161VSN821MQ40S ELXM161VSN821MR30S ELXM161VSN102MQ45S ELXM161VSN102MR35S ELXM161VSN122MQ50S ELXM161VSN122MR40S ELXM161VSN122MA30S ELXM161VSN152MR45S ELXM161VSN152MA35S ELXM161VSN182MR50S ELXM161VSN182MA40S ELXM161VSN222MA50S ELXM181VSN271MP25S ELXM181VSN331MP30S ELXM181VSN391MP30S ELXM181VSN391MQ25S ELXM181VSN471MP35S ELXM181VSN471MQ30S ELXM181VSN561MP40S ELXM181VSN561MQ30S ELXM181VSN561MR25S ELXM181VSN681MP45S ELXM181VSN681MQ35S ELXM181VSN681MR30S ELXM181VSN821MQ40S ELXM181VSN821MR35S ELXM181VSN102MQ50S ELXM181VSN102MR35S ELXM181VSN102MA30S ELXM181VSN122MR45S ELXM181VSN122MA35S ELXM181VSN152MR50S ELXM181VSN152MA40S ELXM181VSN182MA45S ELXM181VSN222MA50S ELXM201VSN221MP25S ELXM201VSN271MP30S ELXM201VSN331MP30S ELXM201VSN331MQ25S ELXM201VSN391MP35S ELXM201VSN391MQ30S ELXM201VSN471MP40S ELXM201VSN471MQ30S ELXM201VSN471MR25S ELXM201VSN561MP45S ELXM201VSN561MQ35S ELXM201VSN561MR30S ELXM201VSN681MQ40S ELXM201VSN681MR30S ELXM201VSN821MQ45S ELXM201VSN821MR35S ELXM201VSN102MR45S ELXM201VSN102MA30S ELXM201VSN122MR50S ELXM201VSN122MA40S ELXM201VSN152MA45S ELXM201VSN182MA50S 220 250 315 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 220 270 330 330 390 390 470 470 470 560 560 560 680 680 820 820 820 1,000 1,000 1,200 1,500 180 220 270 270 330 330 390 390 390 470 470 470 560 560 680 680 680 820 820 1,000 1,200 100 120 150 150 180 180 220 220 220 270 270 270 330 330 330 390 390 390 470 470 560 560 680 820 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 45 30 x 35 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 25.4 x 40 30 x 35 35 x 30 25.4 x 50 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.90 1.05 1.19 1.16 1.33 1.29 1.49 1.48 1.45 1.63 1.71 1.62 1.87 1.86 2.10 2.12 2.08 2.48 2.46 2.78 3.20 0.82 0.95 1.08 1.05 1.22 1.19 1.36 1.35 1.32 1.49 1.52 1.49 1.70 1.69 1.91 1.93 1.90 2.19 2.13 2.46 2.86 0.67 0.77 0.86 0.85 0.96 0.96 1.09 1.06 1.08 1.24 1.23 1.23 1.40 1.42 1.45 1.59 1.54 1.57 1.81 1.77 2.03 2.02 2.29 2.59 Part No. ELXM221VSN221MP25S ELXM221VSN271MP30S ELXM221VSN331MP35S ELXM221VSN331MQ25S ELXM221VSN391MP40S ELXM221VSN391MQ30S ELXM221VSN471MP45S ELXM221VSN471MQ35S ELXM221VSN471MR25S ELXM221VSN561MP50S ELXM221VSN561MQ40S ELXM221VSN561MR30S ELXM221VSN681MQ45S ELXM221VSN681MR35S ELXM221VSN821MQ50S ELXM221VSN821MR40S ELXM221VSN821MA30S ELXM221VSN102MR50S ELXM221VSN102MA40S ELXM221VSN122MA45S ELXM221VSN152MA50S ELXM251VSN181MP25S ELXM251VSN221MP30S ELXM251VSN271MP35S ELXM251VSN271MQ25S ELXM251VSN331MP40S ELXM251VSN331MQ30S ELXM251VSN391MP45S ELXM251VSN391MQ35S ELXM251VSN391MR25S ELXM251VSN471MP50S ELXM251VSN471MQ40S ELXM251VSN471MR30S ELXM251VSN561MQ45S ELXM251VSN561MR35S ELXM251VSN681MQ50S ELXM251VSN681MR40S ELXM251VSN681MA30S ELXM251VSN821MR45S ELXM251VSN821MA35S ELXM251VSN102MA40S ELXM251VSN122MA50S ELXM3B1VSN101MP25S ELXM3B1VSN121MP30S ELXM3B1VSN151MP30S ELXM3B1VSN151MQ25S ELXM3B1VSN181MP35S ELXM3B1VSN181MQ30S ELXM3B1VSN221MP40S ELXM3B1VSN221MQ30S ELXM3B1VSN221MR25S ELXM3B1VSN271MP45S ELXM3B1VSN271MQ35S ELXM3B1VSN271MR30S ELXM3B1VSN331MQ40S ELXM3B1VSN331MR35S ELXM3B1VSN331MA30S ELXM3B1VSN391MQ50S ELXM3B1VSN391MR35S ELXM3B1VSN391MA30S ELXM3B1VSN471MR45S ELXM3B1VSN471MA35S ELXM3B1VSN561MR50S ELXM3B1VSN561MA40S ELXM3B1VSN681MA45S ELXM3B1VSN821MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 266 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXMSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 100 120 120 150 150 180 180 180 220 220 220 270 270 330 330 330 390 390 470 470 560 680 68 82 100 100 120 120 150 150 150 180 180 180 220 220 270 270 270 330 330 390 390 470 560 22 x25 22x30 25.4x25 22x35 25.4x30 22x40 25.4x30 30x25 22x45 25.4x35 30x30 25.4x40 30x35 25.4x45 30x35 35x30 30x40 35x35 30x50 35x40 35x40 35x50 22x25 22x30 22x30 25.4x25 22x35 25.4x30 22x40 25.4x30 30x25 22x45 25.4x35 30x30 25.4x40 30x35 25.4x50 30x40 35x30 30x45 35x35 30x50 35x40 35x45 35x50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.67 0.77 0.76 0.88 0.88 0.99 0.96 0.98 1.12 1.11 1.11 1.26 1.28 1.40 1.42 1.45 1.60 1.61 1.86 1.85 2.02 2.36 0.55 0.63 0.70 0.70 0.79 0.79 0.90 0.88 0.90 0.99 1.01 1.01 1.14 1.16 1.32 1.33 1.31 1.52 1.48 1.69 1.68 1.91 2.14 WV (Vdc) Part No. ELXM351VSN101MP25S ELXM351VSN121MP30S ELXM351VSN121MQ25S ELXM351VSN151MP35S ELXM351VSN151MQ30S ELXM351VSN181MP40S ELXM351VSN181MQ30S ELXM351VSN181MR25S ELXM351VSN221MP45S ELXM351VSN221MQ35S ELXM351VSN221MR30S ELXM351VSN271MQ40S ELXM351VSN271MR35S ELXM351VSN331MQ45S ELXM351VSN331MR35S ELXM351VSN331MA30S ELXM351VSN391MR40S ELXM351VSN391MA35S ELXM351VSN471MR50S ELXM351VSN471MA40S ELXM351VSN561MA40S ELXM351VSN681MA50S ELXM401VSN680MP25S ELXM401VSN820MP30S ELXM401VSN101MP30S ELXM401VSN101MQ25S ELXM401VSN121MP35S ELXM401VSN121MQ30S ELXM401VSN151MP40S ELXM401VSN151MQ30S ELXM401VSN151MR25S ELXM401VSN181MP45S ELXM401VSN181MQ35S ELXM401VSN181MR30S ELXM401VSN221MQ40S ELXM401VSN221MR35S ELXM401VSN271MQ50S ELXM401VSN271MR40S ELXM401VSN271MA30S ELXM401VSN331MR45S ELXM401VSN331MA35S ELXM401VSN391MR50S ELXM401VSN391MA40S ELXM401VSN471MA45S ELXM401VSN561MA50S 420 450 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 56 68 82 82 100 100 120 120 120 150 150 150 180 180 220 220 220 270 270 330 330 390 470 47 56 68 68 82 82 100 100 100 120 120 120 150 150 180 180 180 220 220 270 270 330 390 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 25.4 x 40 30 x 35 25.4 x 50 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 25.4 x 40 30 x 35 25.4 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.50 0.58 0.63 0.63 0.72 0.72 0.81 0.79 0.80 0.92 0.92 0.92 1.03 1.05 1.19 1.16 1.18 1.38 1.34 1.56 1.55 1.74 1.96 0.46 0.52 0.58 0.58 0.65 0.65 0.74 0.72 0.73 0.83 0.82 0.82 0.94 0.96 1.06 1.05 1.07 1.20 1.21 1.41 1.40 1.60 1.79 Part No. ELXM421VSN560MP25S ELXM421VSN680MP30S ELXM421VSN820MP30S ELXM421VSN820MQ25S ELXM421VSN101MP35S ELXM421VSN101MQ30S ELXM421VSN121MP40S ELXM421VSN121MQ30S ELXM421VSN121MR25S ELXM421VSN151MP45S ELXM421VSN151MQ35S ELXM421VSN151MR30S ELXM421VSN181MQ40S ELXM421VSN181MR35S ELXM421VSN221MQ50S ELXM421VSN221MR35S ELXM421VSN221MA30S ELXM421VSN271MR45S ELXM421VSN271MA35S ELXM421VSN331MR50S ELXM421VSN331MA40S ELXM421VSN391MA45S ELXM421VSN471MA50S ELXM451VSN470MP25S ELXM451VSN560MP30S ELXM451VSN680MP30S ELXM451VSN680MQ25S ELXM451VSN820MP35S ELXM451VSN820MQ30S ELXM451VSN101MP40S ELXM451VSN101MQ30S ELXM451VSN101MR25S ELXM451VSN121MP45S ELXM451VSN121MQ35S ELXM451VSN121MR30S ELXM451VSN151MQ40S ELXM451VSN151MR35S ELXM451VSN181MQ45S ELXM451VSN181MR35S ELXM451VSN181MA30S ELXM451VSN221MR40S ELXM451VSN221MA35S ELXM451VSN271MR50S ELXM451VSN271MA40S ELXM451VSN331MA45S ELXM451VSN391MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 267 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LXS Long life snap-ins, 105 LXM P265 Series Longer life For solar power generation Endurance with ripple current : 5,000 hours at 105 Rated voltage range : 160 to 500V Downsized from LXQ series Non solvent resistant type RoHS Compliant LXS Downsized Higher ripple LXQ P271 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 500Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 to 500V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 to 500V Z(-25)/Z(+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value (500Vdc : 250%) Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Negative mark 4.00.5 L2.5 Negative mark PC board pin-out 2-1.2x6 D+1max. D+1max. 10 2-2 Vent Code : LI (30,35) Sleeve (PET : Brown) PC board pin-out 4.20.5 Terminal Vent 50.5 L2.5 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E LXS 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 2,200F:222) Dummy terminal code Terminal code Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 268 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXSSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 470 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,700 2,700 3,300 390 560 560 680 820 820 820 820 1,000 1,000 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,700 390 470 560 560 680 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 22 x25 22 x30 25.4 x25 22 x35 25.4 x30 22 x 40 22x 45 25.4x 35 30x 25 22 x50 25.4 x40 30 x30 35 x25 25.4 x45 30x 35 25.4x 50 30x 40 35x 30 30 x45 30 x50 35 x35 35 x40 35 x45 35x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 25.4 x 35 30 x 25 22x 45 22x 50 25.4x 40 30 x30 35 x25 25.4 x45 30 x35 25.4 x50 30x 40 35x 30 30x 45 35x 35 30 x50 35 x40 35 x45 35 x50 22 x25 22 x30 22 x35 25.4 x25 22 x40 25.4 x30 30 x25 22 x45 25.4 x35 22 x50 25.4x 40 30x 30 35x 25 25.4x 45 25.4 x50 30 x35 35 x30 30 x40 30x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.47 1.86 1.84 2.09 2.08 2.35 2.40 2.40 2.50 2.69 2.68 2.77 2.91 3.05 3.17 3.40 3.57 3.62 4.05 4.11 4.07 4.67 4.78 5.40 1.34 1.68 1.67 1.90 2.13 2.08 2.17 2.26 2.40 2.45 2.45 2.52 2.66 2.73 2.83 3.10 3.26 3.31 3.66 3.68 4.11 4.22 4.32 4.88 1.34 1.54 1.72 1.67 1.94 1.89 2.06 2.17 2.17 2.45 2.45 2.52 2.66 2.73 2.78 2.83 2.96 3.26 3.34 Part No. ELXS161VSN471MP25S ELXS161VSN681MP30S ELXS161VSN681MQ25S ELXS161VSN821MP35S ELXS161VSN821MQ30S ELXS161VSN102MP40S ELXS161VSN102MP45S ELXS161VSN102MQ35S ELXS161VSN102MR25S ELXS161VSN122MP50S ELXS161VSN122MQ40S ELXS161VSN122MR30S ELXS161VSN122MA25S ELXS161VSN152MQ45S ELXS161VSN152MR35S ELXS161VSN182MQ50S ELXS161VSN182MR40S ELXS161VSN182MA30S ELXS161VSN222MR45S ELXS161VSN222MR50S ELXS161VSN222MA35S ELXS161VSN272MA40S ELXS161VSN272MA45S ELXS161VSN332MA50S ELXS181VSN391MP25S ELXS181VSN561MP30S ELXS181VSN561MQ25S ELXS181VSN681MP35S ELXS181VSN821MP40S ELXS181VSN821MQ30S ELXS181VSN821MQ35S ELXS181VSN821MR25S ELXS181VSN102MP45S ELXS181VSN102MP50S ELXS181VSN102MQ40S ELXS181VSN102MR30S ELXS181VSN102MA25S ELXS181VSN122MQ45S ELXS181VSN122MR35S ELXS181VSN152MQ50S ELXS181VSN152MR40S ELXS181VSN152MA30S ELXS181VSN182MR45S ELXS181VSN182MA35S ELXS181VSN222MR50S ELXS181VSN222MA40S ELXS181VSN222MA45S ELXS181VSN272MA50S ELXS201VSN391MP25S ELXS201VSN471MP30S ELXS201VSN561MP35S ELXS201VSN561MQ25S ELXS201VSN681MP40S ELXS201VSN681MQ30S ELXS201VSN681MR25S ELXS201VSN821MP45S ELXS201VSN821MQ35S ELXS201VSN102MP50S ELXS201VSN102MQ40S ELXS201VSN102MR30S ELXS201VSN102MA25S ELXS201VSN122MQ45S ELXS201VSN122MQ50S ELXS201VSN122MR35S ELXS201VSN122MA30S ELXS201VSN152MR40S ELXS201VSN152MR45S WV (Vdc) 200 250 315 400 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 1,500 1,800 1,800 2,200 2,700 270 330 390 390 470 470 560 560 560 680 680 680 680 820 820 820 820 1,000 1,200 1,200 1,200 1,200 1,500 1,800 180 220 220 270 270 330 330 390 390 390 470 470 470 470 560 560 560 680 680 680 820 820 1,000 1,200 120 150 180 180 220 220 220 270 270 270 330 330 330 390 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 30 x 25 22 x 45 22 x 50 25.4 x 35 25.4 x 40 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 22 x 50 25.4 x 35 25.4 x 40 30 x 30 35 x 25 25.4 x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.36 3.72 3.81 4.32 4.88 1.11 1.29 1.44 1.40 1.61 1.57 1.79 1.79 1.87 2.02 2.02 2.08 2.19 2.26 2.29 2.34 2.45 2.66 2.99 3.04 3.00 3.11 3.56 3.98 0.95 1.10 1.10 1.24 1.25 1.40 1.43 1.56 1.59 1.57 1.76 1.79 1.73 1.82 1.99 1.93 2.02 2.19 2.25 2.26 2.51 2.57 2.91 3.25 0.77 0.90 1.02 0.99 1.15 1.13 1.17 1.29 1.32 1.30 1.47 1.45 1.52 1.63 Part No. ELXS201VSN152MA35S ELXS201VSN182MR50S ELXS201VSN182MA40S ELXS201VSN222MA45S ELXS201VSN272MA50S ELXS251VSN271MP25S ELXS251VSN331MP30S ELXS251VSN391MP35S ELXS251VSN391MQ25S ELXS251VSN471MP40S ELXS251VSN471MQ30S ELXS251VSN561MP45S ELXS251VSN561MQ35S ELXS251VSN561MR25S ELXS251VSN681MP50S ELXS251VSN681MQ40S ELXS251VSN681MR30S ELXS251VSN681MA25S ELXS251VSN821MQ45S ELXS251VSN821MQ50S ELXS251VSN821MR35S ELXS251VSN821MA30S ELXS251VSN102MR40S ELXS251VSN122MR45S ELXS251VSN122MR50S ELXS251VSN122MA35S ELXS251VSN122MA40S ELXS251VSN152MA45S ELXS251VSN182MA50S ELXS3B1VSN181MP25S ELXS3B1VSN221MP30S ELXS3B1VSN221MQ25S ELXS3B1VSN271MP35S ELXS3B1VSN271MQ30S ELXS3B1VSN331MP40S ELXS3B1VSN331MR25S ELXS3B1VSN391MP45S ELXS3B1VSN391MP50S ELXS3B1VSN391MQ35S ELXS3B1VSN471MQ40S ELXS3B1VSN471MQ45S ELXS3B1VSN471MR30S ELXS3B1VSN471MA25S ELXS3B1VSN561MQ50S ELXS3B1VSN561MR35S ELXS3B1VSN561MA30S ELXS3B1VSN681MR40S ELXS3B1VSN681MR45S ELXS3B1VSN681MA35S ELXS3B1VSN821MR50S ELXS3B1VSN821MA40S ELXS3B1VSN102MA45S ELXS3B1VSN122MA50S ELXS401VSN121MP25S ELXS401VSN151MP30S ELXS401VSN181MP35S ELXS401VSN181MQ25S ELXS401VSN221MP40S ELXS401VSN221MQ30S ELXS401VSN221MR25S ELXS401VSN271MP45S ELXS401VSN271MP50S ELXS401VSN271MQ35S ELXS401VSN331MQ40S ELXS401VSN331MR30S ELXS401VSN331MA25S ELXS401VSN391MQ45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 269 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXSSeries STANDARD RATINGS WV (Vdc) 400 420 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 390 390 390 470 470 560 560 560 680 820 100 120 120 150 180 180 180 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 560 680 25.4 x50 30x35 35x30 30x40 35x35 30x45 30x50 35x40 35x45 35x50 22x25 22x30 25.4x25 22x35 22x40 25.4x30 30x25 22x45 22x50 25.4x35 25.4x40 25.4x45 30x30 35x25 25.4x50 30 x35 35x30 30x40 30x45 35x35 30x50 35x40 35x45 35x50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.66 1.61 1.68 1.82 1.88 2.04 2.07 2.13 2.40 2.69 0.70 0.81 0.81 0.93 1.04 1.02 1.06 1.17 1.20 1.18 1.33 1.36 1.31 1.38 1.52 1.48 1.55 1.66 1.70 1.71 1.90 1.95 2.17 2.45 Part No. ELXS401VSN391MQ50S ELXS401VSN391MR35S ELXS401VSN391MA30S ELXS401VSN471MR40S ELXS401VSN471MA35S ELXS401VSN561MR45S ELXS401VSN561MR50S ELXS401VSN561MA40S ELXS401VSN681MA45S ELXS401VSN821MA50S ELXS421VSN101MP25S ELXS421VSN121MP30S ELXS421VSN121MQ25S ELXS421VSN151MP35S ELXS421VSN181MP40S ELXS421VSN181MQ30S ELXS421VSN181MR25S ELXS421VSN221MP45S ELXS421VSN221MP50S ELXS421VSN221MQ35S ELXS421VSN271MQ40S ELXS421VSN271MQ45S ELXS421VSN271MR30S ELXS421VSN271MA25S ELXS421VSN331MQ50S ELXS421VSN331MR35S ELXS421VSN331MA30S ELXS421VSN391MR40S ELXS421VSN391MR45S ELXS421VSN391MA35S ELXS421VSN471MR50S ELXS421VSN471MA40S ELXS421VSN561MA45S ELXS421VSN681MA50S WV (Vdc) 450 500 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 82 120 120 120 150 150 180 180 180 220 220 220 220 270 270 270 270 330 390 390 390 470 470 560 100 120 120 150 180 180 220 220 270 270 330 390 470 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 30 x 25 30 x 30 35 x 25 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35 x 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.64 0.81 0.83 0.81 0.94 0.93 1.06 1.06 1.06 1.20 1.20 1.18 1.24 1.36 1.38 1.34 1.40 1.52 1.70 1.73 1.71 1.95 1.99 2.22 0.82 0.91 0.88 1.04 1.17 1.10 1.33 1.23 1.50 1.42 1.60 1.78 2.03 Part No. ELXS451VSN820MP25S ELXS451VSN121MP30S ELXS451VSN121MP35S ELXS451VSN121MQ25S ELXS451VSN151MP40S ELXS451VSN151MQ30S ELXS451VSN181MP45S ELXS451VSN181MQ35S ELXS451VSN181MR25S ELXS451VSN221MP50S ELXS451VSN221MQ40S ELXS451VSN221MR30S ELXS451VSN221MA25S ELXS451VSN271MQ45S ELXS451VSN271MQ50S ELXS451VSN271MR35S ELXS451VSN271MA30S ELXS451VSN331MR40S ELXS451VSN391MR45S ELXS451VSN391MR50S ELXS451VSN391MA35S ELXS451VSN471MA40S ELXS451VSN471MA45S ELXS451VSN561MA50S ELXS501VSN101MR25S ELXS501VSN121MR30S ELXS501VSN121MA25S ELXS501VSN151MR35S ELXS501VSN181MR40S ELXS501VSN181MA30S ELXS501VSN221MR45S ELXS501VSN221MA35S ELXS501VSN271MR50S ELXS501VSN271MA40S ELXS501VSN331MA45S ELXS501VSN391MA50S ELXS501VSN471MA60S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 500Vdc 50 0.81 0.77 0.70 120 1.00 1.00 1.00 300 1.17 1.16 1.16 1k 1.32 1.30 1.30 10k 1.45 1.41 1.41 50k 1.50 1.43 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 270 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LXQ Long life snap-ins, 105 LXM P265 Series Longer life Downsized Endurance with ripple current : 5,000 hours at 105 Downsized and higher ripple version of LXG series Non solvent resistant type RoHS Compliant LXQ LXS P268 Longer life KMM P250 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 160 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z(-25)/Z(+20) 4 8 Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Negative mark Code : LI (30,35) Sleeve (PET : Brown) PC board pin-out Negative mark D+1max. D+1max. 10 2-2 4.00.5 L2 Vent PC board pin-out 2-1.2x6 4.20.5 Terminal Vent 50.5 L2 4.51 14.21 The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E L XQ 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330F:331, 2,200F:222) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 271 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXQSeries STANDARD RATINGS WV (Vdc) 160 180 200 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 390 560 560 680 680 680 820 1,000 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,700 330 470 470 560 560 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 270 390 390 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 22 x25 22 x30 25.4 x25 22 x35 25.4 x30 30 x25 22 x40 22 x 45 22x 50 25.4x 35 30x 30 35 x25 25.4 x40 25.4 x45 30 x35 30 x40 35x 30 25.4x 50 30x 45 35x 35 30 x50 35 x40 35 x45 35 x50 22 x25 22 x30 25.4 x25 22 x35 30 x25 22 x40 25.4 x30 22 x45 25.4 x35 30 x30 35 x25 22 x50 25.4x 40 25.4x 45 30x 35 25.4x 50 30 x40 35 x30 30 x45 30 x50 35 x35 35x 40 35x 45 35x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 25.4x 45 25.4 x50 30 x40 35 x30 30 x45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.32 1.66 1.68 1.87 1.88 1.96 2.09 2.36 2.41 2.38 2.40 2.55 2.66 2.71 2.69 2.77 2.86 3.08 3.17 3.22 3.53 3.66 4.14 4.68 1.21 1.52 1.52 1.70 1.78 1.91 1.88 1.99 2.16 2.17 2.31 2.25 2.43 2.47 2.46 2.75 2.77 2.86 3.17 3.22 3.22 3.66 3.74 4.22 1.10 1.38 1.39 1.55 1.73 1.71 1.78 1.81 1.87 1.98 2.10 2.18 2.09 2.22 2.35 2.39 2.53 2.61 2.84 Part No. ELXQ161VSN391MP25S ELXQ161VSN561MP30S ELXQ161VSN561MQ25S ELXQ161VSN681MP35S ELXQ161VSN681MQ30S ELXQ161VSN681MR25S ELXQ161VSN821MP40S ELXQ161VSN102MP45S ELXQ161VSN102MP50S ELXQ161VSN102MQ35S ELXQ161VSN102MR30S ELXQ161VSN102MA25S ELXQ161VSN122MQ40S ELXQ161VSN122MQ45S ELXQ161VSN122MR35S ELXQ161VSN122MR40S ELXQ161VSN122MA30S ELXQ161VSN152MQ50S ELXQ161VSN152MR45S ELXQ161VSN152MA35S ELXQ161VSN182MR50S ELXQ161VSN182MA40S ELXQ161VSN222MA45S ELXQ161VSN272MA50S ELXQ181VSN331MP25S ELXQ181VSN471MP30S ELXQ181VSN471MQ25S ELXQ181VSN561MP35S ELXQ181VSN561MR25S ELXQ181VSN681MP40S ELXQ181VSN681MQ30S ELXQ181VSN821MP45S ELXQ181VSN821MQ35S ELXQ181VSN821MR30S ELXQ181VSN821MA25S ELXQ181VSN102MP50S ELXQ181VSN102MQ40S ELXQ181VSN102MQ45S ELXQ181VSN102MR35S ELXQ181VSN122MQ50S ELXQ181VSN122MR40S ELXQ181VSN122MA30S ELXQ181VSN152MR45S ELXQ181VSN152MR50S ELXQ181VSN152MA35S ELXQ181VSN182MA40S ELXQ181VSN182MA45S ELXQ181VSN222MA50S ELXQ201VSN271MP25S ELXQ201VSN391MP30S ELXQ201VSN391MQ25S ELXQ201VSN471MP35S ELXQ201VSN561MP40S ELXQ201VSN561MQ30S ELXQ201VSN561MR25S ELXQ201VSN681MP45S ELXQ201VSN681MQ35S ELXQ201VSN681MR30S ELXQ201VSN681MA25S ELXQ201VSN821MP50S ELXQ201VSN821MQ40S ELXQ201VSN821MR35S ELXQ201VSN102MQ45S ELXQ201VSN102MQ50S ELXQ201VSN102MR40S ELXQ201VSN102MA30S ELXQ201VSN122MR45S WV (Vdc) 200 220 250 315 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 1,200 1,200 1,500 1,800 1,800 270 330 390 470 470 470 560 560 680 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,800 220 270 330 390 390 390 470 560 560 560 560 560 680 680 680 680 820 820 820 820 1,000 1,000 1,200 1,500 150 180 180 220 220 270 270 330 330 330 330 390 390 470 30 x 50 35 x 35 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 30 x 30 22 x 45 22 x 50 25.4 x 35 30 x 35 35 x 25 25.4 x 40 25.4 x 45 30 x 40 35 x 30 25.4 x 50 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 22 x 45 22 x 50 25.4 x 35 30 x 30 35 x 25 25.4 x 40 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 30 x 25 22 x 40 25.4 x 30 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 25.4 x 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.88 2.88 3.34 3.74 3.82 1.10 1.19 1.39 1.55 1.56 1.63 1.73 1.79 1.94 1.99 1.96 2.02 2.10 2.20 2.24 2.29 2.36 2.51 2.59 2.63 2.88 2.98 3.41 3.82 1.01 1.20 1.32 1.44 1.43 1.51 1.62 1.80 1.84 1.78 1.83 1.91 2.00 2.04 2.06 2.15 2.28 2.33 2.39 2.38 2.68 2.72 3.05 3.49 0.80 0.92 0.94 1.04 1.17 1.18 1.19 1.33 1.37 1.40 1.49 1.48 1.52 1.70 Part No. ELXQ201VSN122MR50S ELXQ201VSN122MA35S ELXQ201VSN152MA40S ELXQ201VSN182MA45S ELXQ201VSN182MA50S ELXQ221VSN271MP25S ELXQ221VSN331MP30S ELXQ221VSN391MQ25S ELXQ221VSN471MP35S ELXQ221VSN471MQ30S ELXQ221VSN471MR25S ELXQ221VSN561MP40S ELXQ221VSN561MR30S ELXQ221VSN681MP45S ELXQ221VSN681MP50S ELXQ221VSN681MQ35S ELXQ221VSN681MR35S ELXQ221VSN681MA25S ELXQ221VSN821MQ40S ELXQ221VSN821MQ45S ELXQ221VSN821MR40S ELXQ221VSN821MA30S ELXQ221VSN102MQ50S ELXQ221VSN102MR45S ELXQ221VSN102MA35S ELXQ221VSN122MR50S ELXQ221VSN122MA40S ELXQ221VSN152MA45S ELXQ221VSN182MA50S ELXQ251VSN221MP25S ELXQ251VSN271MP30S ELXQ251VSN331MQ25S ELXQ251VSN391MP35S ELXQ251VSN391MQ30S ELXQ251VSN391MR25S ELXQ251VSN471MP40S ELXQ251VSN561MP45S ELXQ251VSN561MP50S ELXQ251VSN561MQ35S ELXQ251VSN561MR30S ELXQ251VSN561MA25S ELXQ251VSN681MQ40S ELXQ251VSN681MQ45S ELXQ251VSN681MR35S ELXQ251VSN681MA30S ELXQ251VSN821MQ50S ELXQ251VSN821MR40S ELXQ251VSN821MR45S ELXQ251VSN821MA35S ELXQ251VSN102MR50S ELXQ251VSN102MA40S ELXQ251VSN122MA45S ELXQ251VSN152MA50S ELXQ3B1VSN151MP25S ELXQ3B1VSN181MP30S ELXQ3B1VSN181MQ25S ELXQ3B1VSN221MP35S ELXQ3B1VSN221MR25S ELXQ3B1VSN271MP40S ELXQ3B1VSN271MQ30S ELXQ3B1VSN331MP45S ELXQ3B1VSN331MQ35S ELXQ3B1VSN331MR30S ELXQ3B1VSN331MA25S ELXQ3B1VSN391MP50S ELXQ3B1VSN391MQ40S ELXQ3B1VSN471MQ45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 272 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXQSeries STANDARD RATINGS WV (Vdc) 315 350 400 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 470 470 560 560 560 560 680 680 820 1,000 120 150 180 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 470 560 560 680 820 100 120 150 150 180 180 180 220 220 220 270 270 270 270 330 330 330 390 390 30 x35 35 x30 25.4 x50 30 x40 30 x45 35 x35 30 x50 35 x40 35 x45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 25.4 x 45 30 x 40 35 x 30 25.4 x 50 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 22 x 45 25.4 x 35 35 x 25 22 x 50 25.4 x 40 25.4 x 45 30 x 30 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.71 1.82 1.88 1.92 1.97 2.00 2.21 2.29 2.57 2.89 0.72 0.84 0.94 1.04 1.06 1.07 1.13 1.20 1.24 1.27 1.35 1.36 1.39 1.43 1.55 1.60 1.66 1.72 1.81 1.83 2.00 2.07 2.34 2.62 0.66 0.75 0.86 0.86 0.96 0.97 1.02 1.09 1.12 1.22 1.23 1.26 1.29 1.27 1.44 1.43 1.52 1.60 1.67 WV (Vdc) Part No. ELXQ3B1VSN471MR35S ELXQ3B1VSN471MA30S ELXQ3B1VSN561MQ50S ELXQ3B1VSN561MR40S ELXQ3B1VSN561MR45S ELXQ3B1VSN561MA35S ELXQ3B1VSN681MR50S ELXQ3B1VSN681MA40S ELXQ3B1VSN821MA45S ELXQ3B1VSN102MA50S ELXQ351VSN121MP25S ELXQ351VSN151MP30S ELXQ351VSN181MQ25S ELXQ351VSN221MP35S ELXQ351VSN221MP40S ELXQ351VSN221MQ30S ELXQ351VSN221MR25S ELXQ351VSN271MP45S ELXQ351VSN271MQ35S ELXQ351VSN271MR30S ELXQ351VSN271MA25S ELXQ351VSN331MP50S ELXQ351VSN331MQ40S ELXQ351VSN331MR35S ELXQ351VSN391MQ45S ELXQ351VSN391MR40S ELXQ351VSN391MA30S ELXQ351VSN471MQ50S ELXQ351VSN471MR45S ELXQ351VSN471MA35S ELXQ351VSN561MR50S ELXQ351VSN561MA40S ELXQ351VSN681MA45S ELXQ351VSN821MA50S ELXQ401VSN101MP25S ELXQ401VSN121MP30S ELXQ401VSN151MP35S ELXQ401VSN151MQ25S ELXQ401VSN181MP40S ELXQ401VSN181MQ30S ELXQ401VSN181MR25S ELXQ401VSN221MP45S ELXQ401VSN221MQ35S ELXQ401VSN221MA25S ELXQ401VSN271MP50S ELXQ401VSN271MQ40S ELXQ401VSN271MQ45S ELXQ401VSN271MR30S ELXQ401VSN331MQ50S ELXQ401VSN331MR35S ELXQ401VSN331MA30S ELXQ401VSN391MR40S ELXQ401VSN391MA35S 400 420 450 Cap (F) 470 470 470 560 680 100 120 120 150 180 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 82 100 100 120 150 150 150 150 150 180 180 180 180 220 220 220 270 270 270 330 390 390 390 470 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 30 x 45 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 22 x 45 25.4 x 30 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 35 30 x 45 35 x 40 30 x 50 35 x 45 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 22 x 45 25.4 x 30 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 35 30 x 45 30 x 50 35 x 40 35 x 45 35 x 50 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.81 1.84 1.90 2.12 2.39 0.66 0.75 0.77 0.86 0.96 0.98 0.97 1.01 1.02 1.11 1.14 1.14 1.22 1.29 1.30 1.38 1.44 1.48 1.54 1.64 1.73 1.84 1.94 2.17 0.59 0.69 0.70 0.77 0.88 0.90 0.88 0.92 0.93 1.01 1.03 1.03 1.10 1.16 1.17 1.24 1.31 1.33 1.39 1.51 1.67 1.73 1.77 1.98 Part No. ELXQ401VSN471MR45S ELXQ401VSN471MR50S ELXQ401VSN471MA40S ELXQ401VSN561MA45S ELXQ401VSN681MA50S ELXQ421VSN101MP25S ELXQ421VSN121MP30S ELXQ421VSN121MQ25S ELXQ421VSN151MP35S ELXQ421VSN181MP40S ELXQ421VSN181MP45S ELXQ421VSN181MQ30S ELXQ421VSN181MQ35S ELXQ421VSN181MR25S ELXQ421VSN221MP50S ELXQ421VSN221MQ40S ELXQ421VSN221MR30S ELXQ421VSN221MA25S ELXQ421VSN271MQ45S ELXQ421VSN271MR35S ELXQ421VSN271MA30S ELXQ421VSN331MQ50S ELXQ421VSN331MR40S ELXQ421VSN331MA35S ELXQ421VSN391MR45S ELXQ421VSN391MA40S ELXQ421VSN471MR50S ELXQ421VSN471MA45S ELXQ421VSN561MA50S ELXQ451VSN820MP25S ELXQ451VSN101MP30S ELXQ451VSN101MQ25S ELXQ451VSN121MP35S ELXQ451VSN151MP40S ELXQ451VSN151MP45S ELXQ451VSN151MQ30S ELXQ451VSN151MQ35S ELXQ451VSN151MR25S ELXQ451VSN181MP50S ELXQ451VSN181MQ40S ELXQ451VSN181MR30S ELXQ451VSN181MA25S ELXQ451VSN221MQ45S ELXQ451VSN221MR35S ELXQ451VSN221MA30S ELXQ451VSN271MQ50S ELXQ451VSN271MR40S ELXQ451VSN271MA35S ELXQ451VSN331MR45S ELXQ451VSN391MR50S ELXQ451VSN391MA40S ELXQ451VSN391MA45S ELXQ451VSN471MA50S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 273 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LXG Long life snap-ins, 105 LXG Series Endurance with ripple current : 5,000 hours at 105 Non solvent resistant type RoHS Compliant Longer life KMQ P235 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 10 to 100Vdc (at 20, 120Hz) 20% (M) I=0.02CV or 3mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80 & 100V tan (Max.) 0.60 0.45 0.30 0.25 0.20 0.15 0.15 (at 20, 120Hz) Capacitance change : Capacitance at the lowest operating temperature shall not be less than 70% of the 20 value. Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80 & 100V Z(-25)/Z(+20) 4 4 3 3 2 2 2 Z(-40)/Z(+20) 15 15 10 8 6 6 5 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 25% of the initial value D.F. (tan) 250% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Negative mark Terminal Negative mark D+1max. D+1max. 10 L2 Vent 2-2 *4.00.5 Code : LI (35) Sleeve (PET : Brown) PC board pin-out Vent PC board pin-out 2-1.2x6 4.20.5 Terminal 50.5 L2 4.51 14.21 *D=35mm : 3.50.5mm The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XG AAA VS N AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 390F:391, 3,300F:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 10V:100, 100V:101) Series code Category Please refer to "Product code guide (snap-in type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 10 to 50Vdc 63 to 100Vdc 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 50k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 274 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXGSeries STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (F) 6,800 10,000 10,000 12,000 12,000 12,000 15,000 15,000 18,000 18,000 18,000 18,000 22,000 22,000 27,000 27,000 33,000 39,000 39,000 47,000 5,600 6,800 6,800 8,200 10,000 10,000 10,000 12,000 12,000 12,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 27,000 27,000 39,000 3,900 4,700 4,700 5,600 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 12,000 12,000 12,000 15,000 15,000 18,000 18,000 27,000 2,200 3,300 3,300 3,900 3,900 4,700 4,700 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 30x 25 22x 40 25.4x 35 22x 50 25.4x 40 30x 30 35x 25 30x 35 35x 30 25.4x 50 30x 40 35x 35 30x 50 35x 40 35x 50 22x 25 22x 30 25.4x 25 22x 35 22x 40 25.4x 30 30x 25 25.4x 35 30x 30 35x 25 22x 50 25.4x 40 25.4x 50 30x 35 35x 30 30x 40 35x 35 30x 50 35x 40 35x 50 22x 25 22x 30 25.4x 25 22x 35 22x 40 25.4x 30 30x 25 25.4x 35 30x 30 35x 25 22x 50 25.4x 40 25.4x 50 30x 35 35x 30 30x 40 35x 35 30x 50 35x 40 35x 50 22x 25 22x 30 25.4x 25 22x 35 25.4x 30 22x 40 30x 25 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 1.30 1.65 1.64 1.85 1.85 1.89 2.12 2.16 2.45 2.43 2.37 2.42 2.73 2.79 3.11 3.13 3.49 3.99 3.96 4.62 1.44 1.66 1.66 1.87 2.12 2.07 2.11 2.37 2.37 2.42 2.74 2.71 3.11 3.02 3.09 3.46 3.49 4.07 4.04 5.16 1.31 1.51 1.51 1.70 1.92 1.87 1.90 2.14 2.15 2.19 2.45 2.43 2.78 2.70 2.76 3.13 3.16 3.64 3.61 4.70 1.10 1.42 1.41 1.58 1.58 1.78 1.77 Part No. WV (Vdc) ELXG100VSN682MP25S ELXG100VSN103MP30S ELXG100VSN103MQ25S ELXG100VSN123MP35S ELXG100VSN123MQ30S ELXG100VSN123MR25S ELXG100VSN153MP40S ELXG100VSN153MQ35S ELXG100VSN183MP50S ELXG100VSN183MQ40S ELXG100VSN183MR30S ELXG100VSN183MA25S ELXG100VSN223MR35S ELXG100VSN223MA30S ELXG100VSN273MQ50S ELXG100VSN273MR40S ELXG100VSN333MA35S ELXG100VSN393MR50S ELXG100VSN393MA40S ELXG100VSN473MA50S ELXG160VSN562MP25S ELXG160VSN682MP30S ELXG160VSN682MQ25S ELXG160VSN822MP35S ELXG160VSN103MP40S ELXG160VSN103MQ30S ELXG160VSN103MR25S ELXG160VSN123MQ35S ELXG160VSN123MR30S ELXG160VSN123MA25S ELXG160VSN153MP50S ELXG160VSN153MQ40S ELXG160VSN183MQ50S ELXG160VSN183MR35S ELXG160VSN183MA30S ELXG160VSN223MR40S ELXG160VSN223MA35S ELXG160VSN273MR50S ELXG160VSN273MA40S ELXG160VSN393MA50S ELXG250VSN392MP25S ELXG250VSN472MP30S ELXG250VSN472MQ25S ELXG250VSN562MP35S ELXG250VSN682MP40S ELXG250VSN682MQ30S ELXG250VSN682MR25S ELXG250VSN822MQ35S ELXG250VSN822MR30S ELXG250VSN822MA25S ELXG250VSN103MP50S ELXG250VSN103MQ40S ELXG250VSN123MQ50S ELXG250VSN123MR35S ELXG250VSN123MA30S ELXG250VSN153MR40S ELXG250VSN153MA35S ELXG250VSN183MR50S ELXG250VSN183MA40S ELXG250VSN273MA50S ELXG350VSN222MP25S ELXG350VSN332MP30S ELXG350VSN332MQ25S ELXG350VSN392MP35S ELXG350VSN392MQ30S ELXG350VSN472MP40S ELXG350VSN472MR25S 35 50 63 80 Cap (F) 5,600 5,600 5,600 6,800 6,800 8,200 8,200 8,200 10,000 10,000 12,000 12,000 18,000 1,500 1,800 1,800 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 5,600 5,600 6,800 6,800 10,000 1,000 1,200 1,200 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 6,800 680 820 1,000 1,000 1,200 1,200 1,200 1,500 1,800 1,800 1,800 1,800 2,200 2,200 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 25.4 x 50 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 35 x 30 25.4 x 50 30 x 40 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 25.4 x 50 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 22 x 35 25.4 x 25 22 x 40 25.4 x 30 30 x 25 25.4 x 35 22 x 50 25.4 x 40 30 x 30 35 x 25 25.4 x 50 30 x 35 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.98 1.98 2.03 2.26 2.24 2.57 2.50 2.55 2.86 2.88 3.32 3.30 4.29 1.02 1.17 1.17 1.33 1.51 1.47 1.50 1.70 1.70 1.74 1.91 1.89 2.11 2.16 2.38 2.39 2.41 2.79 2.78 3.57 1.00 1.15 1.15 1.32 1.49 1.45 1.48 1.67 1.68 1.71 1.92 1.90 1.93 2.20 2.18 2.41 2.43 2.80 2.78 3.55 0.97 1.12 1.27 1.23 1.42 1.39 1.41 1.62 1.84 1.82 1.78 1.82 2.11 2.05 Part No. ELXG350VSN562MQ35S ELXG350VSN562MR30S ELXG350VSN562MA25S ELXG350VSN682MP50S ELXG350VSN682MQ40S ELXG350VSN822MQ50S ELXG350VSN822MR35S ELXG350VSN822MA30S ELXG350VSN103MR40S ELXG350VSN103MA35S ELXG350VSN123MR50S ELXG350VSN123MA40S ELXG350VSN183MA50S ELXG500VSN152MP25S ELXG500VSN182MP30S ELXG500VSN182MQ25S ELXG500VSN222MP35S ELXG500VSN272MP40S ELXG500VSN272MQ30S ELXG500VSN272MR25S ELXG500VSN332MQ35S ELXG500VSN332MR30S ELXG500VSN332MA25S ELXG500VSN392MP50S ELXG500VSN392MQ40S ELXG500VSN472MR35S ELXG500VSN472MA30S ELXG500VSN562MQ50S ELXG500VSN562MR40S ELXG500VSN562MA35S ELXG500VSN682MR50S ELXG500VSN682MA40S ELXG500VSN103MA50S ELXG630VSN102MP25S ELXG630VSN122MP30S ELXG630VSN122MQ25S ELXG630VSN152MP35S ELXG630VSN182MP40S ELXG630VSN182MQ30S ELXG630VSN182MR25S ELXG630VSN222MQ35S ELXG630VSN222MR30S ELXG630VSN222MA25S ELXG630VSN272MP50S ELXG630VSN272MQ40S ELXG630VSN272MR35S ELXG630VSN332MQ50S ELXG630VSN332MA30S ELXG630VSN392MR40S ELXG630VSN392MA35S ELXG630VSN472MR50S ELXG630VSN472MA40S ELXG630VSN682MA50S ELXG800VSN681MP25S ELXG800VSN821MP30S ELXG800VSN102MP35S ELXG800VSN102MQ25S ELXG800VSN122MP40S ELXG800VSN122MQ30S ELXG800VSN122MR25S ELXG800VSN152MQ35S ELXG800VSN182MP50S ELXG800VSN182MQ40S ELXG800VSN182MR30S ELXG800VSN182MA25S ELXG800VSN222MQ50S ELXG800VSN222MR35S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 275 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105 LXGSeries STANDARD RATINGS WV (Vdc) 80 100 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 2,200 2,700 2,700 3,300 3,300 4,700 390 560 560 680 820 820 820 35 x 30 30x 40 35x 35 30x 50 35 x40 35 x50 22 x25 22 x30 25.4 x25 22 x35 22 x40 25.4 x30 30 x25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.09 2.35 2.37 2.75 2.73 3.46 0.78 0.99 0.98 1.12 1.26 1.23 1.25 Part No. ELXG800VSN222MA30S ELXG800VSN272MR40S ELXG800VSN272MA35S ELXG800VSN332MR50S ELXG800VSN332MA40S ELXG800VSN472MA50S ELXG101VSN391MP25S ELXG101VSN561MP30S ELXG101VSN561MQ25S ELXG101VSN681MP35S ELXG101VSN821MP40S ELXG101VSN821MQ30S ELXG101VSN821MR25S WV (Vdc) Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 100 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 2,200 2,200 2,700 25.4 x 35 30 x 30 35 x 25 22 x 50 25.4 x 40 30 x 35 25.4 x 50 30 x 40 35 x 30 35 x 35 30 x 50 35 x 40 35 x 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.41 1.42 1.45 1.60 1.59 1.61 1.86 1.87 1.85 2.07 2.40 2.39 2.81 Part No. ELXG101VSN102MQ35S ELXG101VSN102MR30S ELXG101VSN102MA25S ELXG101VSN122MP50S ELXG101VSN122MQ40S ELXG101VSN122MR35S ELXG101VSN152MQ50S ELXG101VSN152MR40S ELXG101VSN152MA30S ELXG101VSN182MA35S ELXG101VSN222MR50S ELXG101VSN222MA40S ELXG101VSN272MA50S MAXIMUM IMPEDANCE [m/20, 30kHz] Case size DxL(mm) Vdc 22x25 22x30 22x35 22x40 22x50 25.4x25 25.4x30 25.4x35 25.4x40 25.4x50 30x25 30x30 30x35 30x40 30x50 35x25 35x30 35x35 35x40 35x50 10 to 63 120 100 80 70 50 90 70 60 50 40 70 50 40 35 25 65 45 38 30 23 80 100 150 120 95 80 60 110 85 70 60 45 80 60 50 40 30 70 50 40 30 25 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 276 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105 CHA Upgrade! Series LXH P279 Downsized Longer life Doesn't spark with DC over voltage Downsized from current KLG series Endurance with ripple current : 2,000 hours at 105 Non solvent resistant type RoHS Compliant CHA KLG Downsized SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 200 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) 200Vdc : 0.15 max. (0.20 max. for D=35mm) 400Vdc : 0.15 max. Rated Voltage (Vdc) 200 to 450V Z(-25) / Z(+20) 4 Dissipation Factor (tan) Low Temperature Characteristics (Max.Impedance Ratio) (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) 50nH max. (at 20, 1MHz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value ESL Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (22 to 35) Negative mark PC board pin-out 10 D+1max. Sleeve (PET : Brown) 2-2 4.00.5 L2 Vent The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E CHA 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 56F:560,100F:101) Dummy terminal code Terminal code Voltage code (ex. 200V:201,400V:401) Series code Category Please refer to "Product code guide (snap-in type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Rated Voltage(Vdc) Frequency(Hz) 200, 250 400, 450 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 277 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105 CHASeries Upgrade! STANDARD RATINGS WV (Vdc) 200 250 Cap (F) Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 180 220 270 330 330 390 390 470 470 470 560 560 560 680 680 680 820 820 820 1,000 1,000 1,200 1,200 120 180 180 220 270 270 270 330 330 390 390 390 390 470 470 560 560 560 680 680 22 x20 22 x20 22 x25 22 x 30 25.4 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 30 30 x 25 25.4 x 35 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 25 30x 35 35x 30 30x 45 35 x35 22 x20 22 x25 25.4 x20 22 x30 22 x35 25.4 x25 30 x20 22 x40 25.4 x30 22 x45 25.4 x35 30 x25 35 x20 25.4 x40 30 x30 25.4 x45 30 x35 35 x25 30 x40 35 x30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.15 0.15 0.20 0.15 0.20 0.15 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.15 0.15 0.15 0.15 0.20 0.15 0.20 0.82 0.90 1.02 1.20 1.20 1.35 1.35 1.45 1.45 1.47 1.62 1.60 1.60 1.82 1.81 1.86 2.11 2.11 2.11 2.40 2.40 2.69 2.65 0.68 0.87 0.93 1.00 1.14 1.13 1.25 1.28 1.29 1.42 1.46 1.52 1.62 1.64 1.67 1.82 1.87 1.99 2.12 2.19 WV (Vdc) Part No. ECHA201VSN181MP20S ECHA201VSN221MP20S ECHA201VSN271MP25S ECHA201VSN331MP30S ECHA201VSN331MQ25S ECHA201VSN391MP30S ECHA201VSN391MQ25S ECHA201VSN471MP35S ECHA201VSN471MQ30S ECHA201VSN471MR25S ECHA201VSN561MP40S ECHA201VSN561MQ30S ECHA201VSN561MR25S ECHA201VSN681MQ35S ECHA201VSN681MR30S ECHA201VSN681MA25S ECHA201VSN821MQ45S ECHA201VSN821MR35S ECHA201VSN821MA25S ECHA201VSN102MR35S ECHA201VSN102MA30S ECHA201VSN122MR45S ECHA201VSN122MA35S ECHA251VSN121MP20S ECHA251VSN181MP25S ECHA251VSN181MQ20S ECHA251VSN221MP30S ECHA251VSN271MP35S ECHA251VSN271MQ25S ECHA251VSN271MR20S ECHA251VSN331MP40S ECHA251VSN331MQ30S ECHA251VSN391MP45S ECHA251VSN391MQ35S ECHA251VSN391MR25S ECHA251VSN391MA20S ECHA251VSN471MQ40S ECHA251VSN471MR30S ECHA251VSN561MQ45S ECHA251VSN561MR35S ECHA251VSN561MA25S ECHA251VSN681MR40S ECHA251VSN681MA30S Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) Cap (F) 250 400 450 820 820 56 68 82 100 100 120 120 150 150 150 180 180 180 220 220 220 270 270 270 330 330 330 390 390 470 82 120 120 150 180 180 180 220 220 270 270 270 330 390 420 30 x 45 35 x 35 22 x 20 22 x 20 22 x 25 22 x 25 25.4 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 30 x 25 22 x 40 25.4 x 35 30 x 25 25.4 x 35 30 x 30 35 x 25 25.4 x 45 30 x 35 35 x 25 30 x 35 30 x 40 35 x 30 30 x 40 35 x 35 35 x 40 25.4 x 25 25.4 x 30 30 x 25 25.4 x 35 25.4 x 40 30 x 30 30 x 35 30 x 35 35 x 25 30 x 35 30 x 40 35 x 30 35 x 35 35 x 40 35 x 50 0.15 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 2.39 2.42 0.45 0.51 0.58 0.66 0.66 0.76 0.76 0.85 0.85 0.85 0.94 0.95 0.95 1.24 1.24 1.24 1.30 1.30 1.30 1.45 1.47 1.47 1.60 1.61 1.84 0.61 0.76 0.77 0.88 0.99 0.97 1.00 1.30 1.20 1.22 1.28 1.30 1.40 1.60 1.56 Part No. ECHA251VSN821MR45S ECHA251VSN821MA35S ECHA401VSN560MP20S ECHA401VSN680MP20S ECHA401VSN820MP25S ECHA401VSN101MP25S ECHA401VSN101MQ25S ECHA401VSN121MP30S ECHA401VSN121MQ25S ECHA401VSN151MP35S ECHA401VSN151MQ30S ECHA401VSN151MR25S ECHA401VSN181MP40S ECHA401VSN181MQ35S ECHA401VSN181MR25S ECHA401VSN221MQ35S ECHA401VSN221MR30S ECHA401VSN221MA25S ECHA401VSN271MQ45S ECHA401VSN271MR35S ECHA401VSN271MA25S ECHA401VSN331MR35S ECHA401VSN331MR40S ECHA401VSN331MA30S ECHA401VSN391MR40S ECHA401VSN391MA35S ECHA401VSN471MA40S ECHA451VSN820MQ25S ECHA451VSN121MQ30S ECHA451VSN121MR25S ECHA451VSN151MQ35S ECHA451VSN181MQ40S ECHA451VSN181MR30S ECHA451VSN181MR35S ECHA451VSN221MR35S ECHA451VSN221MA25S ECHA451VSN271MR35S ECHA451VSN271MR40S ECHA451VSN271MA30S ECHA451VSN331MA35S ECHA451VSN391MA40S ECHA451VSN421MA50S DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following test DC voltage is applied. Test DC voltage Rated Voltage 200Vdc 250Vdc 400Vdc 450Vdc Nominal Capacitance <330F 330FC<470F 470F <330F 330FC<470F 470F <100F 100FC<220F 220F <100F 100FC<220F 220F Test Current Limit 4A 5A 7A 4A 5A 7A 2A 4A 7A 2A 4A 7A Circuit Test Voltage 300/375Vdc AC input SW + CX - Constant DC voltage/current power supply 350/450Vdc 500/600Vdc 550/675Vdc Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 278 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105 LXH Series LXH Doesn't spark with DC over voltage Same case sizes of KMH Endurance with ripple current : 5,000 hours at 105 Non solvent resistant type RoHS Compliant Downsized Longer life KLG Downsized CHA P277 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Capacitance Tolerance Leakage Current -25 to +105 200 & 400Vdc 20% (M) I=0.02CV or 3mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics ESL DC Overvoltage Test 0.15 max. (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) Z(-25) /Z(+20)4 (at 120Hz) 50nH max. (at 20, 1MHz) When an excessive DC voltage is applied to the capacitors under the test conditions on next page, the vent shall operate and then the capacitors shall become open-circuit without burning materials. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 or 3,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Terminal Code : VS (22 to 35) Negative mark PC board pin-out 10 D+1max. Sleeve (PET : Brown) * 4.00.5 L2 Vent 2-2 *D=35mm : 3.50.5mm The standard design has no plastic disc. PART NUMBERING SYSTEM 1 2 3 4 E LXH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 68F:680, 1,500F:152) Dummy terminal code Terminal code Voltage code (ex. 200V:201, 400V:401) Series code Category Please refer to "Product code guide (snap-in type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 200Vdc 400Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 279 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105 LXHSeries STANDARD RATINGS WV (Vdc) Cap (F) 270 330 330 390 390 470 470 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 68 68 82 82 100 100 120 120 120 150 150 150 180 180 180 180 220 220 220 270 270 270 330 330 390 390 470 200 400 Case size DxL(mm) 22 x25 22x 30 25.4x 25 22x 35 25.4 x30 22 x40 25.4x30 30x25 22x45 25.4x 35 30x 30 22x 50 25.4x 40 30 x30 35x25 25.4x50 30x35 35x30 30 x45 35x35 30x50 35x40 35x45 22x 25 25.4x20 22x30 25.4x25 22x 35 25.4x 30 22x 40 25.4x30 30x25 22x45 25.4x35 30x 30 22x 50 25.4x40 30x 30 35x 25 25.4x45 30x35 35x30 25.4x50 30x 40 35x 30 30x 45 35x 35 30 x50 35 x40 35x45 Rated ripple current (Arms/105,120Hz) tan 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Part No. 5,000 hours 3,000 hours 0.45 0.62 0.62 0.67 0.66 0.72 0.72 0.77 0.80 0.78 0.81 0.89 0.89 0.89 0.88 1.05 1.03 1.05 1.18 1.18 1.33 1.36 1.57 0.26 0.24 0.30 0.30 0.34 0.34 0.37 0.37 0.39 0.42 0.43 0.43 0.49 0.48 0.47 0.48 0.55 0.54 0.55 0.62 0.62 0.59 0.71 0.69 0.80 0.79 0.89 0.87 1.20 1.21 1.31 1.28 1.40 1.41 1.50 1.56 1.53 1.57 1.74 1.74 1.74 1.72 2.04 2.00 2.04 2.30 2.30 2.60 2.65 3.08 0.51 0.46 0.58 0.58 0.66 0.66 0.72 0.72 0.76 0.82 0.84 0.84 0.95 0.94 0.92 0.94 1.07 1.06 1.08 1.21 1.21 1.15 1.39 1.35 1.55 1.54 1.74 ELXH201VSN271MP25S ELXH201VSN331MP30S ELXH201VSN331MQ25S ELXH201VSN391MP35S ELXH201VSN391MQ30S ELXH201VSN471MP40S ELXH201VSN471MQ30S ELXH201VSN471MR25S ELXH201VSN561MP45S ELXH201VSN561MQ35S ELXH201VSN561MR30S ELXH201VSN681MP50S ELXH201VSN681MQ40S ELXH201VSN681MR30S ELXH201VSN681MA25S ELXH201VSN821MQ50S ELXH201VSN821MR35S ELXH201VSN821MA30S ELXH201VSN102MR45S ELXH201VSN102MA35S ELXH201VSN122MR50S ELXH201VSN122MA40S ELXH201VSN152MA45S ELXH401VSN680MP25S ELXH401VSN680MQ20S ELXH401VSN820MP30S ELXH401VSN820MQ25S ELXH401VSN101MP35S ELXH401VSN101MQ30S ELXH401VSN121MP40S ELXH401VSN121MQ30S ELXH401VSN121MR25S ELXH401VSN151MP45S ELXH401VSN151MQ35S ELXH401VSN151MR30S ELXH401VSN181MP50S ELXH401VSN181MQ40S ELXH401VSN181MR30S ELXH401VSN181MA25S ELXH401VSN221MQ45S ELXH401VSN221MR35S ELXH401VSN221MA30S ELXH401VSN271MQ50S ELXH401VSN271MR40S ELXH401VSN271MA30S ELXH401VSN331MR45S ELXH401VSN331MA35S ELXH401VSN391MR50S ELXH401VSN391MA40S ELXH401VSN471MA45S DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following test DC voltage is applied. Test DC voltage Rated Voltage 200Vdc 400Vdc Capacitance <330F 330C<470F 470F <100F 100C<220F 220F Test Current limit Test DC voltage 4A 5A 300/375Vdc 7A 2A 4A 500/600Vdc 7A AC input Circuit SW + CX - Constant DC voltage/current power supply Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 280 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Snap-ins, 105 KMV Series For frequently change of regenerative voltage from AC servo amplifier and inverter control Ideal use to power supply, specially power source with turn on and off frequently and highly voltage fluctuation Improved the resistance for charge and discharge from same dimension of KMQ series Endurance with ripple current : 3,000 hours at 105 Rated voltage range : 350 to 450Vdc, Capacitance 82 to 1,200F Non solvent resistant type RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Charge and Discharge -25 to +105 350 to 450Vdc 20% (M) I3 CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 350 & 400V 420 & 450V tan (Max.) 0.15 0.20 Rated voltage (Vdc) 350 to 450V Z(-25)/Z(+20) 8 (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to charge and discharge test with the voltage waveform shown below at room temperature (15 to 35). Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Frequency Number of cycles 6Hz 50 million times Rated voltage 150V Voltage waveform 1 cycle 0V Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 15% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value Shelf Life *Please consult with us about charge and discharge conditions. DIMENSIONS [mm] Code : VS (22 to 35) : Standard Sleeve (PET : Brown) Negative mark Terminal Code : LI (35) Sleeve (PET : Brown) PC board pin-out Negative mark D+1max. D+1max. 10 Vent 2-2 L2.5 PC board pin-out 2-1.2x6 4.20.5 Terminal 4.00.5 Vent 50.5 L2.5 4.51 14.21 No plastic disk is the standard design. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 281 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Snap-ins, 105 KMVSeries PART NUMBERING SYSTEM 1 2 3 4 E KMV 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 1,200F:122) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (snap-in type)" STANDARD RATINGS WV (Vdc) 350 400 Cap (F) Max. charge Rated ripple current and current Case size Max.discharge DxL(mm) (Arms/ current 105, 120Hz) (Arms/ 6Hz) 120 150 180 220 220 220 270 270 270 330 330 330 330 390 390 470 470 470 560 560 680 680 820 820 1,200 100 120 150 180 180 180 220 220 220 270 270 270 270 330 330 390 390 390 470 470 560 560 680 820 1,000 22x 25 22x 30 25.4 x25 22x35 22x40 25.4x30 22x45 25.4x 35 30x 25 22x 50 25.4x 40 30 x30 35x25 25.4x45 30x35 25.4x50 30x 40 35x 30 30x 45 35x 35 30x50 35x40 35x45 35x50 35x60 22x25 22x30 25.4x 25 22x 35 22x 40 25.4x 30 22x45 25.4x35 30x25 22x50 25.4x 40 30x 30 35x 25 25.4x 45 30 x35 25.4x50 30x40 35x30 30x45 35x 35 30x 50 35x 40 35x 45 35 x50 35 x60 0.74 0.87 0.92 1.08 1.10 1.05 1.24 1.21 1.15 1.41 1.37 1.29 1.31 1.51 1.44 1.69 1.62 1.61 1.82 1.77 2.04 2.02 2.27 2.32 2.88 0.69 0.79 0.87 0.99 1.01 0.98 1.14 1.13 1.10 1.30 1.28 1.22 1.26 1.44 1.38 1.59 1.55 1.55 1.74 1.71 1.93 1.94 2.19 2.45 2.79 0.42 0.49 0.54 0.60 0.62 0.61 0.71 0.70 0.68 0.80 0.80 0.77 0.78 0.89 0.88 0.99 1.00 0.97 1.12 1.08 1.27 1.25 1.41 1.46 1.84 0.38 0.44 0.49 0.55 0.56 0.55 0.64 0.63 0.61 0.73 0.72 0.70 0.71 0.82 0.81 0.91 0.91 0.89 1.03 1.00 1.15 1.14 1.29 1.44 1.70 WV (Vdc) Part No. EKMV351VSN121MP25S EKMV351VSN151MP30S EKMV351VSN181MQ25S EKMV351VSN221MP35S EKMV351VSN221MP40S EKMV351VSN221MQ30S EKMV351VSN271MP45S EKMV351VSN271MQ35S EKMV351VSN271MR25S EKMV351VSN331MP50S EKMV351VSN331MQ40S EKMV351VSN331MR30S EKMV351VSN331MA25S EKMV351VSN391MQ45S EKMV351VSN391MR35S EKMV351VSN471MQ50S EKMV351VSN471MR40S EKMV351VSN471MA30S EKMV351VSN561MR45S EKMV351VSN561MA35S EKMV351VSN681MR50S EKMV351VSN681MA40S EKMV351VSN821MA45S EKMV351VSN821MA50S EKMV351VSN122MA60S EKMV401VSN101MP25S EKMV401VSN121MP30S EKMV401VSN151MQ25S EKMV401VSN181MP35S EKMV401VSN181MP40S EKMV401VSN181MQ30S EKMV401VSN221MP45S EKMV401VSN221MQ35S EKMV401VSN221MR25S EKMV401VSN271MP50S EKMV401VSN271MQ40S EKMV401VSN271MR30S EKMV401VSN271MA25S EKMV401VSN331MQ45S EKMV401VSN331MR35S EKMV401VSN391MQ50S EKMV401VSN391MR40S EKMV401VSN391MA30S EKMV401VSN471MR45S EKMV401VSN471MA35S EKMV401VSN561MR50S EKMV401VSN561MA40S EKMV401VSN681MA45S EKMV401VSN821MA50S EKMV401VSN102MA60S 420 450 Cap (F) 82 120 120 150 150 180 180 180 180 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 820 82 100 100 120 150 150 150 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 560 680 Max. charge Rated ripple current and current Case size Max.discharge DxL(mm) (Arms/ current 105, 120Hz) (Arms/ 6Hz) 22 x 25 22 x 30 25.4 x 25 22 x 35 25.4 x 30 22 x 40 22 x 45 25.4 x 35 30 x 25 22 x 50 25.4 x 40 30 x 30 25.4 x 45 30 x 35 35 x 25 25.4 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35 x 60 22 x 25 22 x 30 25.4 x 25 22 x 35 22 x 40 25.4 x 30 30 x 25 22 x 45 22 x 50 25.4 x 35 25.4 x 40 25.4 x 45 30 x 30 35 x 25 25.4 x 50 30 x 35 35 x 30 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 35 x 60 0.64 0.81 0.81 0.93 0.93 1.04 1.06 1.06 1.02 1.20 1.20 1.14 1.36 1.29 1.26 1.52 1.47 1.42 1.64 1.56 1.83 1.78 1.98 2.23 2.52 0.64 0.72 0.72 0.81 0.93 0.91 0.90 1.03 1.06 1.04 1.18 1.20 1.10 1.12 1.35 1.25 1.27 1.42 1.46 1.41 1.61 1.59 1.79 2.00 2.26 0.34 0.44 0.44 0.50 0.50 0.56 0.58 0.58 0.56 0.66 0.65 0.63 0.74 0.73 0.71 0.83 0.84 0.82 0.94 0.91 1.06 1.05 1.18 1.34 1.55 0.34 0.40 0.40 0.45 0.51 0.50 0.51 0.58 0.59 0.57 0.65 0.67 0.63 0.64 0.75 0.73 0.74 0.84 0.87 0.84 0.97 0.96 1.08 1.22 1.42 Part No. EKMV421VSN820MP25S EKMV421VSN121MP30S EKMV421VSN121MQ25S EKMV421VSN151MP35S EKMV421VSN151MQ30S EKMV421VSN181MP40S EKMV421VSN181MP45S EKMV421VSN181MQ35S EKMV421VSN181MR25S EKMV421VSN221MP50S EKMV421VSN221MQ40S EKMV421VSN221MR30S EKMV421VSN271MQ45S EKMV421VSN271MR35S EKMV421VSN271MA25S EKMV421VSN331MQ50S EKMV421VSN331MR40S EKMV421VSN331MA30S EKMV421VSN391MR45S EKMV421VSN391MA35S EKMV421VSN471MR50S EKMV421VSN471MA40S EKMV421VSN561MA45S EKMV421VSN681MA50S EKMV421VSN821MA60S EKMV451VSN820MP25S EKMV451VSN101MP30S EKMV451VSN101MQ25S EKMV451VSN121MP35S EKMV451VSN151MP40S EKMV451VSN151MQ30S EKMV451VSN151MR25S EKMV451VSN181MP45S EKMV451VSN181MP50S EKMV451VSN181MQ35S EKMV451VSN221MQ40S EKMV451VSN221MQ45S EKMV451VSN221MR30S EKMV451VSN221MA25S EKMV451VSN271MQ50S EKMV451VSN271MR35S EKMV451VSN271MA30S EKMV451VSN331MR40S EKMV451VSN331MR45S EKMV451VSN331MA35S EKMV451VSN391MR50S EKMV451VSN391MA40S EKMV451VSN471MA45S EKMV451VSN561MA50S EKMV451VSN681MA60S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 282 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Snap-ins, 105 KMVSeries RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 50 120 300 1k 10k 50k Coefficient 0.77 1.00 1.16 1.30 1.41 1.43 The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 283 CAT. No. E1001O Return Group Chart 284 Return Group Chart Screw Terminal Aluminum Electrolytic Capacitors (Large Capacitors) 285 Return Group Chart 286 Return Group Chart PART NUMBERING SYSTEM Product code guide (Screw mount terminal type) (Example : KMH series, 400V-3,300F,63.5x120L, Without mounting clamp) Please refer to the following table Contents Code Series Code Type Code Tol.(%) Code Sleeve Material Code Polar E KMH KMH Screw terminal LG 20 M Pb-free PVC M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 M D C0 E KMH 4 0 1 LG N 3 3 2 Category Series code Voltage code Terminal code Mounting clamp code Capacitance code Voltage(V) Code 100 10 25 250 100 101 250 Type Code Capacitance tolerance Cap.(F) 100 Code 101 16 17 Size code D(mm) 35 Code A 18 M Supplement code L(mm) Code 50 50 470 471 50 C 55 1,000 102 63.5 D 60 60 251 4,700 472 76.2 E 65 65 315 3B1 10,000 103 89 F 75 75 525 5C1 47,000 473 100 G 80 80 100,000 104 B C Without clamp N 55 85 85 90 90 95 95 96 96 100 A0 105 A5 110 B0 115 B5 120 C0 125 C5 130 D0 140 E0 145 E5 155 F5 170 H0 190 K0 210 M0 220 N0 250 R0 270 T0 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 287 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 85 SME KMH P292 Series 105 Endurance with ripple current : 2,000 hours at 85 RoHS Compliant SME SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance -40 to +85 (10 to 100Vdc) 10 to 100Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 120Hz) (at 20 after 5 minutes) Shall not exceed the values shown in the STANDARD RATINGS Insulation Withstanding Voltage Endurance Shelf Life (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value Leakage current The initial specified value DIMENSIONS (Screw-Mount) [mm] Mounting Clamp A1 W1 Vent 6 305 Mounting Clamp 360 3 8 J G1 L+4max. Plastic disk D 35 50 63.5 76.2 35 to 63.5 : G=6 76.2 & 89 : G=5 A 58.0 78.0 90.0 104.5 B 44.0 64.0 76.0 90.0 W 48.0 68.0 80.0 93.5 H 3.5 4.5 4.5 4.5 Code : C 455 H B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) Code : B F 12.7 22.4 28.0 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 J 14.0 14.0 14.0 16.0 F 22.4 28.0 31.5 31.5 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SME AAA L G N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 39,000F:393) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 10V:100, 100V:101) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 288 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 85 SMESeries STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (F) 39,000 82,000 100,000 120,000 150,000 220,000 270,000 390,000 470,000 560,000 680,000 27,000 56,000 82,000 100,000 120,000 150,000 220,000 270,000 330,000 390,000 470,000 560,000 18,000 39,000 47,000 56,000 82,000 100,000 120,000 180,000 220,000 270,000 330,000 390,000 560,000 15,000 33,000 39,000 47,000 68,000 82,000 120,000 150,000 180,000 220,000 270,000 330,000 470,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 0.60 0.60 0.70 0.70 0.90 1.00 1.20 1.50 2.00 2.50 3.00 0.45 0.60 0.70 0.70 0.80 0.90 1.00 1.20 1.30 1.60 1.80 2.00 0.35 0.40 0.40 0.45 0.50 0.60 0.60 0.75 0.80 0.90 1.00 1.20 1.50 0.30 0.40 0.40 0.45 0.50 0.55 0.60 0.70 0.70 0.75 0.80 0.90 1.00 4.70 7.40 8.00 9.40 9.80 12.1 13.6 15.3 16.0 17.3 18.7 4.20 6.50 8.00 9.60 9.60 11.2 14.2 15.3 17.1 18.0 19.3 20.7 4.00 6.20 7.40 8.30 9.70 10.8 12.8 14.7 16.8 18.3 20.7 22.1 25.8 3.90 6.00 7.00 8.00 9.00 10.3 12.8 14.0 16.6 17.3 19.8 22.5 28.3 WV (Vdc) Part No. ESME100LGB393MA50M ESME100LGB823MA80M ESME100LGB104MAA0M ESME100LGB124MAC0M ESME100LGC154MC80M ESME100LGC224MCA0M ESME100LGC274MCC0M ESME100LGC394MDA0M ESME100LGC474MDC0M ESME100LGC564MEA0M ESME100LGC684MEC0M ESME160LGB273MA50M ESME160LGB563MA80M ESME160LGB823MAA0M ESME160LGB104MAC0M ESME160LGC124MC80M ESME160LGC154MCA0M ESME160LGC224MCC0M ESME160LGC274MDA0M ESME160LGC334MDC0M ESME160LGC394MEA0M ESME160LGC474MEC0M ESME160LGC564MEE0M ESME250LGB183MA50M ESME250LGB393MA80M ESME250LGB473MAA0M ESME250LGB563MAC0M ESME250LGC823MC80M ESME250LGC104MCA0M ESME250LGC124MCC0M ESME250LGC184MDA0M ESME250LGC224MDC0M ESME250LGC274MEA0M ESME250LGC334MEC0M ESME250LGC394MEE0M ESME250LGC564MFE0M ESME350LGB153MA50M ESME350LGB333MA80M ESME350LGB393MAA0M ESME350LGB473MAC0M ESME350LGC683MC80M ESME350LGC823MCA0M ESME350LGC124MCC0M ESME350LGC154MDA0M ESME350LGC184MDC0M ESME350LGC224MEA0M ESME350LGC274MEC0M ESME350LGC334MEE0M ESME350LGC474MFE0M Cap (F) 10,000 18,000 22,000 27,000 39,000 56,000 50 68,000 82,000 120,000 150,000 180,000 270,000 5,600 10,000 15,000 18,000 22,000 33,000 63 39,000 47,000 68,000 100,000 120,000 150,000 3,300 6,800 10,000 12,000 15,000 22,000 80 27,000 33,000 47,000 68,000 82,000 100,000 2,200 4,700 6,800 8,200 10,000 18,000 100 22,000 27,000 33,000 39,000 47,000 68,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 100 35 x 120 50 x 80 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 0.25 0.25 0.30 0.35 0.40 0.40 0.45 0.50 0.50 0.60 0.70 0.80 0.20 0.25 0.25 0.25 0.30 0.35 0.35 0.40 0.40 0.45 0.50 0.55 0.15 0.20 0.20 0.20 0.25 0.30 0.30 0.35 0.35 0.35 0.35 0.40 0.10 0.15 0.15 0.15 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.30 4.10 5.20 5.90 6.60 7.40 9.80 11.1 12.2 16.0 18.1 19.5 24.6 3.00 4.00 5.30 6.20 6.50 8.10 9.60 10.2 13.3 17.1 19.0 22.0 2.50 3.70 4.90 5.40 6.00 7.10 8.60 9.30 12.0 15.4 18.1 21.0 2.50 3.40 4.20 5.00 5.20 8.10 8.60 10.3 11.1 12.4 14.3 18.0 Part No. ESME500LGB103MA50M ESME500LGB183MA80M ESME500LGB223MAA0M ESME500LGB273MAC0M ESME500LGC393MC80M ESME500LGC563MCA0M ESME500LGC683MCC0M ESME500LGC823MDA0M ESME500LGC124MDC0M ESME500LGC154MEC0M ESME500LGC184MEE0M ESME500LGC274MFE0M ESME630LGB562MA50M ESME630LGB103MA80M ESME630LGB153MAA0M ESME630LGB183MAC0M ESME630LGC223MC80M ESME630LGC333MCA0M ESME630LGC393MCC0M ESME630LGC473MDA0M ESME630LGC683MDC0M ESME630LGC104MEC0M ESME630LGC124MEE0M ESME630LGC154MFE0M ESME800LGB332MA50M ESME800LGB682MA80M ESME800LGB103MAA0M ESME800LGB123MAC0M ESME800LGC153MC80M ESME800LGC223MCA0M ESME800LGC273MCC0M ESME800LGC333MDA0M ESME800LGC473MDC0M ESME800LGC683MEC0M ESME800LGC823MEE0M ESME800LGC104MFE0M ESME101LGB222MA50M ESME101LGB472MA80M ESME101LGB682MAA0M ESME101LGB822MAC0M ESME101LGC103MC80M ESME101LGC183MCC0M ESME101LGC223MDA0M ESME101LGC273MDC0M ESME101LGC333MEA0M ESME101LGC393MEC0M ESME101LGC473MEE0M ESME101LGC683MFE0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Rated voltage (Vdc) 10 to 50 63 & 80 100 Case diameter (mm) 35 to 89 35 50 to 89 35 50 63.5 to 89 50 0.95 0.90 0.95 0.82 0.90 0.95 120 1.00 1.00 1.00 1.00 1.00 1.00 Frequency (Hz) 300 1k 1.03 1.05 1.06 1.10 1.03 1.05 1.12 1.22 1.06 1.10 1.03 1.05 10k 1.09 1.18 1.09 1.30 1.18 1.09 50k 1.12 1.22 1.12 1.33 1.22 1.12 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 289 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMQ KMQ Series Endurance with ripple current : 2,000 hours at 105 Downsized and high ripple current from KMH series RoHS Compliant Downsized Higher ripple KMH P292 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 315 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) Shall not exceed the values shown in the STANDARD RATINGS (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp A1 W1 Vent 6 305 Mounting Clamp 360 3 8 J G1 L+4max. Plastic disk D 35 50 63.5 76.2 35 to63.5 : G=6 76.2 &89 : G=5 A 58.0 78.0 90.0 104.5 B 44.0 64.0 76.0 90.0 W 48.0 68.0 80.0 93.5 H 3.5 4.5 4.5 4.5 Code : C 455 H B1 F1 D+1.8max. Sleeve (Pb-free PVC : Brown) Code : B F 12.7 22.4 28.0 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 J 14.0 14.0 14.0 16.0 F 22.4 28.0 31.5 31.5 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470F:471, 1,800F:182) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 290 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMQSeries STANDARD RATINGS WV (Vdc) 315 350 Cap (F) 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,900 5,600 6,800 8,200 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 55 35 x 65 35 x 75 35 x 80 35 x 100 50 x 70 50 x 75 50 x 90 50 x 100 63.5 x 85 63.5 x 96 76.2 x 85 76.2 x 96 76.2 x 110 89 x 100 89 x 115 35 x 55 35 x 60 35 x 70 35 x 80 35 x 90 50 x 65 50 x 75 50 x 85 50 x 100 63.5 x 85 76.2 x 80 76.2 x 105 76.2 x 125 89 x 115 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.4 2.9 3.3 3.8 4.5 5.4 6.0 7.2 8.4 9.9 11.3 13.1 15.0 17.6 17.2 20.1 2.2 2.5 2.9 3.4 4.0 4.6 5.5 6.4 7.6 9.0 11.7 15.6 18.6 18.2 WV (Vdc) Part No. EKMQ3B1LGB561MA55M EKMQ3B1LGB681MA65M EKMQ3B1LGB821MA75M EKMQ3B1LGB102MA80M EKMQ3B1LGB122MAA0M EKMQ3B1LGC152MC70M EKMQ3B1LGC182MC75M EKMQ3B1LGC222MC90M EKMQ3B1LGC272MCA0M EKMQ3B1LGC332MD85M EKMQ3B1LGC392MD96M EKMQ3B1LGC472ME85M EKMQ3B1LGC562ME96M EKMQ3B1LGC682MEB0M EKMQ3B1LGC822MFA0M EKMQ3B1LGC103MFB5M EKMQ351LGB471MA55M EKMQ351LGB561MA60M EKMQ351LGB681MA70M EKMQ351LGB821MA80M EKMQ351LGB102MA90M EKMQ351LGC122MC65M EKMQ351LGC152MC75M EKMQ351LGC182MC85M EKMQ351LGC222MCA0M EKMQ351LGC272MD85M EKMQ351LGC392ME80M EKMQ351LGC562MEA5M EKMQ351LGC682MEC5M EKMQ351LGC822MFB5M 400 450 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 390 470 560 680 820 1,000 1,200 1,500 2,200 3,300 4,700 5,600 6,800 8,200 330 390 470 560 680 820 1,000 1,200 1,500 2,200 3,300 4,700 5,600 5,600 6,800 8,200 35 x 55 35 x 60 35 x 70 35 x 80 35 x 90 50 x 65 50 x 75 50 x 85 63.5 x 85 63.5 x 105 76.2 x 105 89 x 96 89 x 115 89 x 130 35 x 55 35 x 65 35 x 75 35 x 80 35 x 100 35 x 110 50 x 80 50 x 90 50 x 105 63.5 x 96 63.5 x 130 76.2 x 130 76.2 x 155 89 x 120 89 x 140 89 x 170 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.0 2.3 2.7 3.1 3.6 4.2 4.9 5.8 8.1 10.8 14.3 13.9 16.6 19.2 1.8 2.2 2.5 2.8 3.5 4.1 4.6 5.3 6.4 8.5 11.9 15.7 18.5 15.3 18.0 21.6 Part No. EKMQ401LGB391MA55M EKMQ401LGB471MA60M EKMQ401LGB561MA70M EKMQ401LGB681MA80M EKMQ401LGB821MA90M EKMQ401LGC102MC65M EKMQ401LGC122MC75M EKMQ401LGC152MC85M EKMQ401LGC222MD85M EKMQ401LGC332MDA5M EKMQ401LGC472MEA5M EKMQ401LGC562MF96M EKMQ401LGC682MFB5M EKMQ401LGC822MFD0M EKMQ451LGB331MA55M EKMQ451LGB391MA65M EKMQ451LGB471MA75M EKMQ451LGB561MA80M EKMQ451LGB681MAA0M EKMQ451LGB821MAB0M EKMQ451LGC102MC80M EKMQ451LGC122MC90M EKMQ451LGC152MCA5M EKMQ451LGC222MD96M EKMQ451LGC332MDD0M EKMQ451LGC472MED0M EKMQ451LGC562MEF5M EKMQ451LGC562MFC0M EKMQ451LGC682MFE0M EKMQ451LGC822MFH0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) 35, 50 63.5 to 89 50 0.70 0.80 120 1.00 1.00 300 1.30 1.10 1k 1.70 1.15 3k 1.80 1.15 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 291 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMH KMH Series Endurance with ripple current : 2,000 hours at 105 RoHS Compliant 105 SME P288 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (10 to 100Vdc) -25 to +105 (160 to 400Vdc) 10 to 400Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics (at 20, 120Hz) (at 20 after 5 minutes) Shall not exceed the values shown in the STANDARD RATINGS (at 20, 120Hz) 10 to 100Vdc : C(-40)/C(+20)0.6 (at 120Hz) 160 to 400Vdc : C(-25)/C(+20)0.7 When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Capacitance change Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp A1 W1 Vent 6 305 Mounting Clamp 360 3 8 J G1 L+4max. Plastic disk D 35 50 63.5 76.2 35 to63.5 : G=6 76.2 &89 : G=5 A 58.0 78.0 90.0 104.5 B 44.0 64.0 76.0 90.0 W 48.0 68.0 80.0 93.5 H 3.5 4.5 4.5 4.5 Code : C 455 H B1 F1 D+1.8max. Sleeve (Pb-free PVC : Brown) Code : B F 12.7 22.4 28.0 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 J 14.0 14.0 14.0 16.0 F 22.4 28.0 31.5 31.5 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMH A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180F:181, 1,000F:102) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 10V:100, 100V:101, 315V:3B1) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 292 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMHSeries STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (F) 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 50 35 x 50 35 x 60 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 100 50 x 80 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 89 x 140 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 100 50 x 120 63.5 x 100 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 0.45 0.50 0.50 0.50 0.60 0.60 0.65 0.65 0.75 0.80 0.80 0.85 1.00 1.20 1.50 1.80 2.00 2.40 0.40 0.40 0.40 0.45 0.45 0.50 0.50 0.55 0.55 0.65 0.65 0.70 0.80 0.85 1.00 1.30 1.50 1.60 2.00 2.40 0.35 0.35 0.35 0.35 0.35 0.40 0.40 0.40 0.45 0.45 0.50 0.50 0.65 0.65 0.80 0.85 1.00 1.20 1.50 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.35 0.35 4.90 5.10 5.90 7.10 7.10 8.50 8.90 10.7 11.0 13.2 15.7 16.8 19.6 19.7 21.3 21.4 23.6 26.0 4.20 4.70 5.50 5.70 6.80 7.10 8.40 8.80 10.7 10.8 13.1 15.3 15.7 19.2 19.6 21.1 21.3 24.2 28.1 28.5 3.70 4.10 4.80 5.30 6.40 6.70 7.80 9.30 9.70 11.2 11.2 14.8 14.9 17.9 17.9 21.3 21.7 23.4 24.9 3.30 3.60 4.20 4.70 5.70 6.30 7.50 9.00 9.20 11.2 WV (Vdc) Part No. EKMH100LGB273MA50M EKMH100LGB333MA50M EKMH100LGB393MA60M EKMH100LGB473MA80M EKMH100LGB563MA80M EKMH100LGB683MAA0M EKMH100LGB823MAA0M EKMH100LGB104MAC0M EKMH100LGC124MC80M EKMH100LGC154MCA0M EKMH100LGC184MCC0M EKMH100LGC224MCC0M EKMH100LGC274MDC0M EKMH100LGC334MDC0M EKMH100LGC394MEC0M EKMH100LGC474MEC0M EKMH100LGC564MEE0M EKMH100LGC684MFE0M EKMH160LGB183MA50M EKMH160LGB223MA50M EKMH160LGB273MA60M EKMH160LGB333MA60M EKMH160LGB393MA80M EKMH160LGB473MA80M EKMH160LGB563MAA0M EKMH160LGB683MAA0M EKMH160LGC823MC80M EKMH160LGC104MC80M EKMH160LGC124MCA0M EKMH160LGC154MCC0M EKMH160LGC184MCC0M EKMH160LGC224MDC0M EKMH160LGC274MDC0M EKMH160LGC334MEC0M EKMH160LGC394MEC0M EKMH160LGC474MEE0M EKMH160LGC564MFE0M EKMH160LGC684MFE0M EKMH250LGB123MA50M EKMH250LGB153MA50M EKMH250LGB183MA60M EKMH250LGB223MA60M EKMH250LGB273MA80M EKMH250LGB333MA80M EKMH250LGB393MAA0M EKMH250LGB473MAC0M EKMH250LGC563MC80M EKMH250LGC683MCA0M EKMH250LGC823MCA0M EKMH250LGC104MCC0M EKMH250LGC124MDA0M EKMH250LGC154MDC0M EKMH250LGC184MDC0M EKMH250LGC224MEC0M EKMH250LGC274MEC0M EKMH250LGC334MEE0M EKMH250LGC394MFE0M EKMH350LGB822MA50M EKMH350LGB103MA50M EKMH350LGB123MA60M EKMH350LGB153MA60M EKMH350LGB183MA80M EKMH350LGB223MA80M EKMH350LGB273MAA0M EKMH350LGB333MAC0M EKMH350LGC393MC80M EKMH350LGC473MCA0M 35 50 63 80 Cap (F) 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 50 x 100 50 x 120 63.5 x 100 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 120 89 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 140 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 76.2 x 100 76.2 x 100 0.40 0.40 0.45 0.45 0.55 0.65 0.80 0.80 1.00 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.35 0.35 0.40 0.45 0.55 0.60 0.75 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.35 0.40 0.50 0.60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.30 11.4 13.6 14.8 17.6 17.6 19.8 19.8 23.4 25.5 2.80 3.10 3.30 3.30 3.80 4.60 5.10 5.70 6.70 8.10 9.10 11.1 13.1 13.9 13.9 16.6 18.9 19.5 19.5 23.9 23.9 2.30 2.50 2.80 3.10 3.50 3.90 4.70 4.70 5.50 6.60 7.40 9.00 10.9 12.0 12.5 14.9 16.3 18.4 20.0 20.0 21.8 2.40 2.70 3.00 3.40 3.70 4.50 4.90 5.10 6.10 6.70 8.30 9.90 11.0 11.4 13.9 13.9 Part No. EKMH350LGC563MCA0M EKMH350LGC683MCC0M EKMH350LGC823MDA0M EKMH350LGC104MDC0M EKMH350LGC124MDC0M EKMH350LGC154MEC0M EKMH350LGC184MEC0M EKMH350LGC224MEE0M EKMH350LGC274MFE0M EKMH500LGB392MA50M EKMH500LGB472MA50M EKMH500LGB562MA50M EKMH500LGB682MA50M EKMH500LGB822MA60M EKMH500LGB103MA80M EKMH500LGB123MA80M EKMH500LGB153MA80M EKMH500LGB183MAA0M EKMH500LGB223MAC0M EKMH500LGC273MC80M EKMH500LGC333MCA0M EKMH500LGC393MCC0M EKMH500LGC473MCC0M EKMH500LGC563MDA0M EKMH500LGC683MDC0M EKMH500LGC823MEC0M EKMH500LGC104MEC0M EKMH500LGC124MEC0M EKMH500LGC154MFE0M EKMH500LGC184MFE0M EKMH630LGB272MA50M EKMH630LGB332MA50M EKMH630LGB392MA50M EKMH630LGB472MA50M EKMH630LGB562MA60M EKMH630LGB682MA60M EKMH630LGB822MA80M EKMH630LGB103MA80M EKMH630LGB123MAA0M EKMH630LGB153MAC0M EKMH630LGC183MC80M EKMH630LGC223MCA0M EKMH630LGC273MCC0M EKMH630LGC333MCC0M EKMH630LGC393MDA0M EKMH630LGC473MDC0M EKMH630LGC563MDC0M EKMH630LGC683MEC0M EKMH630LGC823MEE0M EKMH630LGC104MEE0M EKMH630LGC124MFE0M EKMH800LGB222MA50M EKMH800LGB272MA50M EKMH800LGB332MA50M EKMH800LGB392MA60M EKMH800LGB472MA60M EKMH800LGB562MA80M EKMH800LGB682MA80M EKMH800LGB822MAA0M EKMH800LGB103MAC0M EKMH800LGC123MC80M EKMH800LGC153MCA0M EKMH800LGC183MCC0M EKMH800LGC223MCC0M EKMH800LGC273MDA0M EKMH800LGC333MEA0M EKMH800LGC393MEA0M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 293 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMHSeries STANDARD RATINGS WV (Vdc) 80 100 160 200 250 Cap (F) 47,000 56,000 68,000 82,000 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 270 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 60 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 100 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 63.5 x 100 63.5 x 100 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 0.30 0.30 0.35 0.40 0.10 0.10 0.10 0.10 0.12 0.12 0.12 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.25 0.25 0.30 0.30 0.30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.15 16.5 18.1 19.7 22.1 2.70 3.00 3.50 4.20 4.20 5.00 5.40 5.80 6.40 7.80 9.30 10.4 10.4 12.5 13.7 15.2 16.1 19.3 21.1 1.20 1.30 1.40 1.60 1.90 2.10 2.50 2.80 3.30 3.80 3.80 4.60 5.10 6.10 7.00 8.40 9.40 11.4 13.4 14.5 16.0 0.90 1.00 1.10 1.20 1.30 1.40 1.70 1.90 2.30 2.50 3.00 3.60 4.10 4.90 5.30 5.80 6.90 7.60 9.30 10.2 12.2 13.1 0.80 WV (Vdc) Part No. EKMH800LGC473MEC0M EKMH800LGC563MEC0M EKMH800LGC683MEE0M EKMH800LGC823MFE0M EKMH101LGB182MA50M EKMH101LGB222MA50M EKMH101LGB272MA60M EKMH101LGB332MA80M EKMH101LGB392MA80M EKMH101LGB472MAA0M EKMH101LGB562MAA0M EKMH101LGB682MAC0M EKMH101LGC822MC80M EKMH101LGC103MCA0M EKMH101LGC123MCC0M EKMH101LGC153MCC0M EKMH101LGC183MDA0M EKMH101LGC223MDC0M EKMH101LGC273MEC0M EKMH101LGC333MEC0M EKMH101LGC393MEE0M EKMH101LGC473MFE0M EKMH101LGC563MFE0M EKMH161LGB561MA50M EKMH161LGB681MA50M EKMH161LGB821MA50M EKMH161LGB102MA50M EKMH161LGB122MA60M EKMH161LGB152MA60M EKMH161LGB182MA80M EKMH161LGB222MA80M EKMH161LGB272MAA0M EKMH161LGB332MAC0M EKMH161LGC392MC80M EKMH161LGC472MCA0M EKMH161LGC562MCA0M EKMH161LGC682MCC0M EKMH161LGC822MDA0M EKMH161LGC103MDC0M EKMH161LGC123MEA0M EKMH161LGC153MEC0M EKMH161LGC183MEE0M EKMH161LGC223MFE0M EKMH161LGC273MFE0M EKMH201LGB331MA50M EKMH201LGB391MA50M EKMH201LGB471MA50M EKMH201LGB561MA50M EKMH201LGB681MA50M EKMH201LGB821MA50M EKMH201LGB102MA60M EKMH201LGB122MA60M EKMH201LGB152MA80M EKMH201LGB182MA80M EKMH201LGB222MAA0M EKMH201LGB272MAC0M EKMH201LGC332MC80M EKMH201LGC392MCA0M EKMH201LGC472MDA0M EKMH201LGC562MDA0M EKMH201LGC682MDC0M EKMH201LGC822MDC0M EKMH201LGC103MEC0M EKMH201LGC123MEC0M EKMH201LGC153MEE0M EKMH201LGC183MFE0M EKMH251LGB271MA50M 250 315 350 400 Cap (F) 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,900 5,600 6,800 8,200 180 220 270 330 390 470 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 130 89 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 76.2 x 120 76.2 x 130 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 50 35 x 60 35 x 60 35 x 80 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.90 1.00 1.10 1.20 1.40 1.60 1.60 1.80 2.10 2.50 2.90 3.50 4.20 4.60 5.70 6.30 7.70 8.40 10.0 11.9 0.80 0.90 1.00 1.10 1.20 1.40 1.50 1.70 1.70 2.00 2.40 2.70 3.30 4.00 4.40 5.10 6.00 6.80 8.00 9.20 11.4 12.6 0.80 0.90 1.00 1.10 1.30 1.40 1.60 1.60 1.80 2.20 2.40 3.00 3.60 4.00 4.60 6.70 8.30 9.50 11.4 0.80 0.90 1.00 1.20 1.30 1.40 Part No. EKMH251LGB331MA50M EKMH251LGB391MA50M EKMH251LGB471MA50M EKMH251LGB561MA50M EKMH251LGB681MA60M EKMH251LGB821MA80M EKMH251LGB102MA80M EKMH251LGB122MA80M EKMH251LGB152MAA0M EKMH251LGB182MAC0M EKMH251LGC222MC80M EKMH251LGC272MCA0M EKMH251LGC332MCC0M EKMH251LGC392MCC0M EKMH251LGC472MDC0M EKMH251LGC562MDC0M EKMH251LGC682MEC0M EKMH251LGC822MEC0M EKMH251LGC103MEE0M EKMH251LGC123MFE0M EKMH3B1LGB181MA50M EKMH3B1LGB221MA50M EKMH3B1LGB271MA50M EKMH3B1LGB331MA50M EKMH3B1LGB391MA50M EKMH3B1LGB471MA60M EKMH3B1LGB561MA60M EKMH3B1LGB681MA80M EKMH3B1LGB821MA80M EKMH3B1LGB102MAA0M EKMH3B1LGB122MAC0M EKMH3B1LGC152MC80M EKMH3B1LGC182MCA0M EKMH3B1LGC222MCC0M EKMH3B1LGC272MCC0M EKMH3B1LGC332MDA0M EKMH3B1LGC392MDC0M EKMH3B1LGC472MEA0M EKMH3B1LGC562MEC0M EKMH3B1LGC682MED0M EKMH3B1LGC822MFE0M EKMH3B1LGC103MFE0M EKMH351LGB181MA50M EKMH351LGB221MA50M EKMH351LGB271MA50M EKMH351LGB331MA50M EKMH351LGB391MA60M EKMH351LGB471MA60M EKMH351LGB561MA80M EKMH351LGB681MA80M EKMH351LGB821MAA0M EKMH351LGB102MAC0M EKMH351LGC122MC80M EKMH351LGC152MCA0M EKMH351LGC182MCC0M EKMH351LGC222MCC0M EKMH351LGC272MDA0M EKMH351LGC392MEC0M EKMH351LGC562MED0M EKMH351LGC682MEE0M EKMH351LGC822MFE0M EKMH401LGB181MA50M EKMH401LGB221MA50M EKMH401LGB271MA50M EKMH401LGB331MA60M EKMH401LGB391MA60M EKMH401LGB471MA80M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 294 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 105 KMHSeries STANDARD RATINGS WV (Vdc) Cap (F) 400 560 680 820 1,000 1,200 1,500 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 0.15 0.15 0.15 0.15 0.15 0.15 1.40 1.70 2.00 2.20 2.70 3.30 Part No. EKMH401LGB561MA80M EKMH401LGB681MAA0M EKMH401LGB821MAC0M EKMH401LGC102MC80M EKMH401LGC122MCA0M EKMH401LGC152MCC0M WV (Vdc) Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 400 2,200 3,300 4,700 5,600 6,800 63.5 x 100 63.5 x 120 76.2 x 130 89 x 140 89 x 140 0.15 0.15 0.15 0.15 0.15 4.20 5.50 7.60 9.40 10.4 Part No. EKMH401LGC222MDA0M EKMH401LGC332MDC0M EKMH401LGC472MED0M EKMH401LGC562MFE0M EKMH401LGC682MFE0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Rated voltage (Vdc) 10 to 50 63 & 80 100 160 to 250 315 to 400 Case diameter (mm) 35 to 89 35 50 to 89 35 50 63.5 to 89 35 50 & 63.5 76.2 & 89 35 to 89 50 0.95 0.90 0.95 0.82 0.90 0.95 0.80 0.81 0.82 0.80 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Frequency (Hz) 300 1k 1.03 1.05 1.06 1.10 1.03 1.05 1.12 1.22 1.06 1.10 1.03 1.05 1.19 1.34 1.14 1.26 1.12 1.22 1.19 1.34 10k 1.09 1.18 1.09 1.30 1.18 1.09 1.46 1.36 1.30 1.46 50k 1.12 1.22 1.12 1.33 1.22 1.12 1.52 1.41 1.33 1.52 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 295 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWH Series RWH Downsized and high ripple current from RWG series Endurance with ripple current : 5,000 hours at 85 RoHS Compliant Downsized RWG P298 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 8,000 hours at 85. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Failure rate 1% The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Useful life Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) Vent 6 30050 45050 8 J G1 L+4max. Plastic disk D 63.5 76.2 63.5, 76.2 : G=6 89 : G=4 Clamp Code : C 3600 3 A1 W1 A B W F 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E K F J 38.1 43.5 28.0 14.0 44.5 50.0 31.5 14.0 50.8 56.5 31.5 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWH A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 296 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWHSeries STANDARD RATINGS WV (Vdc) 350 400 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) Cap (F) 4,700 5,600 6,800 6,800 8,200 8,200 10,000 12,000 15,000 18,000 3,900 4,700 5,600 5,600 6,800 6,800 63.5 x 105 63.5 x 125 63.5 x 145 76.2 x 105 63.5 x 165 76.2 x 120 76.2 x 140 76.2 x 165 89 x 155 89 x 180 63.5 x 100 63.5 x 120 63.5 x 135 76.2 x 105 63.5 x 160 76.2 x 115 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 16.3 19.2 22.6 21.7 26.3 25.2 29.8 35.1 37.5 43.8 14.5 17.2 19.8 19.7 23.5 22.5 WV (Vdc) Part No. ERWH351LGC472MDA5M ERWH351LGC562MDC5M ERWH351LGC682MDE5M ERWH351LGC682MEA5M ERWH351LGC822MDG5M ERWH351LGC822MEC0M ERWH351LGC103MEE0M ERWH351LGC123MEG5M ERWH351LGC153MFF5M ERWH351LGC183MFJ0M ERWH401LGC392MDA0M ERWH401LGC472MDC0M ERWH401LGC562MDD5M ERWH401LGC562MEA5M ERWH401LGC682MDG0M ERWH401LGC682MEB5M Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) Cap (F) 76.2 x 135 76.2 x 160 89 x 130 89 x 150 89 x 180 63.5 x 105 63.5 x 125 63.5 x 145 76.2 x 105 63.5 x 165 76.2 x 120 76.2 x 140 76.2 x 165 89 x 135 89 x 155 89 x 190 8,200 10,000 10,000 12,000 15,000 3,300 3,900 4,700 4,700 5,600 5,600 6,800 8,200 8,200 10,000 12,000 400 450 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 26.5 31.6 28.3 33.0 39.9 13.6 16.0 18.7 18.0 21.7 20.8 24.5 29.0 26.1 30.5 36.6 Part No. ERWH401LGC822MED5M ERWH401LGC103MEG0M ERWH401LGC103MFD0M ERWH401LGC123MFF0M ERWH401LGC153MFJ0M ERWH451LGC332MDA5M ERWH451LGC392MDC5M ERWH451LGC472MDE5M ERWH451LGC472MEA5M ERWH451LGC562MDG5M ERWH451LGC562MEC0M ERWH451LGC682MEE0M ERWH451LGC822MEG5M ERWH451LGC822MFD5M ERWH451LGC103MFF5M ERWH451LGC123MFK0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWH series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. USEFUL LIFE Useful life depending on the ambient temperature Tx under ripple current operating conditions Io : Rated ripple current (Arms/85 ,120Hz) Ix : Operating ripple current (Arms/120Hz) 2.5 Useful life is not applicable for the gray area. Ix / Io 2 1.5 1 ,0 10 55 00 ,0 hr s 00h 00 ,00 hr rs 0h s rs rs 0h 00 50 rs 0h 00 0, 0, 15 0.5 50 30 8,0 15 0 40 45 60 65 Ambient temperature[] 70 75 80 85 Warning ! Useful life shall indicate the end of the life time without exceeding the specified failure rate. It's generally known that Aluminum Electrolytic Capacitors have wear-out failure mode with gradual deteriorate of the electrical parameters and should have large number of the failure rate at the end of life. The useful life time is specified by a certain failure rate. It's not a guaranteed specification. Generally the maximum life time is 15 years131,000hoursconsidering sealing material deteriorate. When a longer life time is required for your application, please consult us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 297 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWG Series RWG Downsized, high ripple version of RWF series 20% better ripple current at 300Hz than RWF series Endurance with ripple current : 5,000 hours at 85 RoHS Compliant Downsized RWF P300 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) Vent 6 30050 45050 8 J G1 L+5max. Plastic disk D 50 63.5 76.2 50 : G=6 63.5, 76.2 : G=5 89 : G=4 Clamp Code : C 3600 3 A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 F 22.4 28.0 31.5 31.5 J 14.0 14.0 14.0 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWG A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 298 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWGSeries STANDARD RATINGS WV (Vdc) Cap (F) 2,200 2,700 3,300 3,900 4,700 5,600 6,800 350 6,800 8,200 8,200 10,000 12,000 15,000 15,000 18,000 1,800 2,200 2,700 3,300 400 3,900 4,700 5,600 5,600 Rated ripple current Case size tan (Arms/85) DxL(mm) 120Hz 300Hz 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 7.70 8.90 10.3 11.8 13.6 15.7 18.8 18.2 22.6 21.0 25.1 28.7 33.6 35.0 40.3 7.00 8.10 9.30 10.9 12.4 14.4 17.0 16.5 9.20 10.6 12.3 14.1 16.3 18.8 22.5 21.8 27.1 25.2 30.1 34.4 40.3 42.0 48.3 8.40 9.70 11.1 13.0 14.8 17.2 20.4 19.8 WV (Vdc) Part No. ERWG351LGC222MC96M ERWG351LGC272MCA5M ERWG351LGC332MCB5M ERWG351LGC392MCD0M ERWG351LGC472MDB5M ERWG351LGC562MDD0M ERWG351LGC682MDF5M ERWG351LGC682MEB5M ERWG351LGC822MDK0M ERWG351LGC822MED0M ERWG351LGC103MEF5M ERWG351LGC123MEH0M ERWG351LGC153MFF5M ERWG351LGC153MFH0M ERWG351LGC183MFK0M ERWG401LGC182MC96M ERWG401LGC222MCA5M ERWG401LGC272MCB5M ERWG401LGC332MCD0M ERWG401LGC392MDB5M ERWG401LGC472MDD0M ERWG401LGC562MDF5M ERWG401LGC562MEB5M Cap (F) 6,800 6,800 8,200 400 10,000 12,000 12,000 15,000 1,500 1,800 2,200 2,700 3,300 3,900 4,700 450 4,700 5,600 5,600 6,800 8,200 10,000 10,000 12,000 Rated ripple current Case size tan (Arms/85) DxL(mm) 120Hz 300Hz 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 20.6 19.2 22.7 26.2 30.0 31.3 36.7 6.40 7.30 8.40 9.80 11.4 13.1 15.6 15.1 18.7 17.4 20.7 23.7 27.4 28.6 32.9 24.7 23.0 27.2 31.4 36.0 37.5 44.0 7.60 8.70 10.0 11.7 13.6 15.7 18.7 18.1 22.4 20.8 24.8 28.4 32.8 34.3 39.4 Part No. ERWG401LGC682MDK0M ERWG401LGC682MED0M ERWG401LGC822MEF5M ERWG401LGC103MEH0M ERWG401LGC123MFF5M ERWG401LGC123MFH0M ERWG401LGC153MFK0M ERWG451LGC152MC96M ERWG451LGC182MCA5M ERWG451LGC222MCB5M ERWG451LGC272MCD0M ERWG451LGC332MDB5M ERWG451LGC392MDD0M ERWG451LGC472MDF5M ERWG451LGC472MEB5M ERWG451LGC562MDK0M ERWG451LGC562MED0M ERWG451LGC682MEF5M ERWG451LGC822MEH0M ERWG451LGC103MFF5M ERWG451LGC103MFH0M ERWG451LGC123MFK0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.2 1k 1.4 3k 1.5 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWG series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 299 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWF RWY P308 Series Low price version High ripple capability Endurance with ripple current : 5,000 hours at 85 Wide range of case sizes from50 to100 RoHS Compliant RWG P298 Downsized RWF RWE P306 Longer life SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) 6 305 Vent 455 8 J G1 L+4max. Plastic disk D 50 63.5 76.2 50 &63.5 : G=6 76.2 &89 : G=5 100 : G=10 <Screw specifications> to89 Plus hexagon-headed screw :M5x0.8x10 Clamp Code : C 360 3 A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 100 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 56.5 K 37.0 43.5 50.0 56.5 63.4 F 22.4 28.0 31.5 31.5 41.5 J 14.0 14.0 14.0 16.0 18.0 Cross-recessed head (phillips) screw : M8x1.25x16 Spring washer,Washer Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. Maximum screw tightening torque :3.23Nm 100 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RW F A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800 F:682, 12,000 F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 300 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWFSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 1,200 1,800 2,200 2,200 2,700 3,300 3,900 4,700 5,600 5,600 6,800 6,800 8,200 10,000 12,000 15,000 18,000 22,000 1,000 1,500 1,800 1,800 2,200 2,700 3,300 3,900 4,700 4,700 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 50 x 60 50 x 75 50 x 85 50 x 96 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 190 100 x 190 100 x 250 50 x 60 50 x 75 50 x 85 50 x 96 50 x 105 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 4.90 6.50 7.50 7.70 9.30 10.8 12.1 14.0 16.6 16.1 20.0 18.6 22.2 25.2 29.1 35.7 36.9 46.1 4.40 5.90 6.80 7.00 8.00 9.80 11.1 12.7 15.2 14.7 WV (Vdc) Part No. ERWF351LGC122MC60M ERWF351LGC182MC75M ERWF351LGC222MC85M ERWF351LGC222MC96M ERWF351LGC272MCB5M ERWF351LGC332MCD0M ERWF351LGC392MDB5M ERWF351LGC472MDD0M ERWF351LGC562MDF5M ERWF351LGC562MEB5M ERWF351LGC682MDK0M ERWF351LGC682MED0M ERWF351LGC822MEF5M ERWF351LGC103MEH0M ERWF351LGC123MFF5M ERWF351LGC153MFK0M ERWF351LGC183MGK0M ERWF351LGC223MGR0M ERWF401LGC102MC60M ERWF401LGC152MC75M ERWF401LGC182MC85M ERWF401LGC182MC96M ERWF401LGC222MCA5M ERWF401LGC272MCD0M ERWF401LGC332MDB5M ERWF401LGC392MDD0M ERWF401LGC472MDF5M ERWF401LGC472MEB5M 400 450 Cap (F) 5,600 5,600 6,800 8,200 10,000 12,000 15,000 18,000 820 1,000 1,200 1,200 1,500 1,800 2,200 2,700 3,300 3,900 3,900 4,700 4,700 5,600 6,800 8,200 10,000 12,000 15,000 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 100 x 190 100 x 220 50 x 60 50 x 75 50 x 85 50 x 96 50 x 96 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 190 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 100 x 190 100 x 250 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.2 16.9 20.2 22.8 26.6 30.0 33.7 37.4 4.00 4.80 5.60 5.70 6.30 7.60 8.80 10.1 11.7 13.8 13.4 16.7 15.5 18.3 20.7 24.1 27.8 29.3 37.0 Part No. ERWF401LGC562MDK0M ERWF401LGC562MED0M ERWF401LGC682MEF5M ERWF401LGC822MEH0M ERWF401LGC103MFF5M ERWF401LGC123MFH0M ERWF401LGC153MGK0M ERWF401LGC183MGN0M ERWF451LGC821MC60M ERWF451LGC102MC75M ERWF451LGC122MC85M ERWF451LGC122MC96M ERWF451LGC152MC96M ERWF451LGC182MCB5M ERWF451LGC222MCD0M ERWF451LGC272MDB5M ERWF451LGC332MDD0M ERWF451LGC392MDF5M ERWF451LGC392MEB5M ERWF451LGC472MDK0M ERWF451LGC472MED0M ERWF451LGC562MEF5M ERWF451LGC682MEH0M ERWF451LGC822MFF5M ERWF451LGC103MFH0M ERWF451LGC123MGK0M ERWF451LGC153MGR0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWF series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 301 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWR Series RWR Downsized and high ripple current from RWQ series Endurance with ripple current : 2,000 hours at 85 RoHS Compliant Downsized RWQ P304 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Failure rate 1% The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Useful life Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) Vent 6 30050 45050 8 J G1 L+4max. Plastic disk D 63.5 76.2 63.5, 76.2 : G=6 89 : G=4 Clamp Code : C 3600 3 A1 W1 A B W F 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E K F J 38.1 43.5 28.0 14.0 44.5 50.0 31.5 14.0 50.8 56.5 31.5 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWR A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 302 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWRSeries STANDARD RATINGS WV (Vdc) 350 400 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) Cap (F) 3,900 4,700 5,600 5,600 6,800 8,200 10,000 12,000 15,000 3,300 3,900 4,700 4,700 5,600 63.5 x 100 63.5 x 100 63.5 x 115 76.2 x 100 76.2 x 100 76.2 x 115 76.2 x 135 89 x 125 89 x 150 63.5 x 100 63.5 x 100 63.5 x 115 76.2 x 100 63.5 x 130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 13.7 15.1 17.5 18.2 20.1 23.4 27.7 28.9 34.9 12.6 13.7 16.0 16.7 18.4 WV (Vdc) Part No. ERWR351LGC392MDA0M ERWR351LGC472MDA0M ERWR351LGC562MDB5M ERWR351LGC562MEA0M ERWR351LGC682MEA0M ERWR351LGC822MEB5M ERWR351LGC103MED5M ERWR351LGC123MFC5M ERWR351LGC153MFF0M ERWR401LGC332MDA0M ERWR401LGC392MDA0M ERWR401LGC472MDB5M ERWR401LGC472MEA0M ERWR401LGC562MDD0M Cap (F) 6,800 8,200 10,000 12,000 2,700 3,300 3,900 3,900 4,700 4,700 5,600 6,800 8,200 10,000 400 450 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 76.2 x 110 76.2 x 130 89 x 125 89 x 145 63.5 x 100 63.5 x 105 63.5 x 115 76.2 x 100 63.5 x 135 76.2 x 105 76.2 x 115 76.2 x 135 89 x 125 89 x 150 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 20.9 24.7 26.4 30.8 11.4 12.9 14.6 15.2 17.2 17.0 19.3 22.8 23.9 28.5 Part No. ERWR401LGC682MEB0M ERWR401LGC822MED0M ERWR401LGC103MFC5M ERWR401LGC123MFE5M ERWR451LGC272MDA0M ERWR451LGC332MDA5M ERWR451LGC392MDB5M ERWR451LGC392MEA0M ERWR451LGC472MDD5M ERWR451LGC472MEA5M ERWR451LGC562MEB5M ERWR451LGC682MED5M ERWR451LGC822MFC5M ERWR451LGC103MFF0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWR series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. USEFUL LIFE Useful life depending on the ambient temperature Tx under ripple current operating conditions Io : Rated ripple current (Arms/85 ,120Hz) Ix : Operating ripple current (Arms/120Hz) 2.5 Useful life is not applicable for the gray area. Ix / Io 2 1.5 5,0 1 ,0 10 30 ,0 00 0h hr s 00 ,00 hrs 0h hr rs s rs rs h 00 00 0, 0,0 15 0.5 50 00 10 0 40 45 50 55 60 65 70 75 80 85 Ambient temperature[] Warning ! Useful life shall indicate the end of the life time without exceeding the specified failure rate. It's generally known that Aluminum Electrolytic Capacitors have wear-out failure mode with gradual deteriorate of the electrical parameters and should have large number of the failure rate at the end of life. The useful life time is specified by a certain failure rate. It's not a guaranteed specification. Generally the maximum life time is 15 years131,000hoursconsidering sealing material deteriorate. When a longer life time is required for your application, please consult us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 303 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWQ Series RWQ Downsized and high ripple current from RWE series Endurance with ripple current : 2,000 hours at 85 RoHS Compliant Downsized RWE P306 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 550Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) Dissipation Factor (tan) Low Temperature Characteristics (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Rated voltage (Vdc) 350 to 450V 500 to 550V C(-25) / C(+20) (at 120Hz) 0.7 0.6 When measured between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied.Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JISC 5101-4. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 D+1.8 max. F1 Sleeve (Pb-free PVC : Black) Vent 6 305 45 5 8 J G1 L+4max. Plastic disk D 50 63.5 76.2 50 & 63.5 : G=6 76.2 & 89 : G=5 Clamp Code : C 360 3 A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 F 22.4 28.0 31.5 31.5 J 14.0 14.0 14.0 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWQ A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401, 550V:551) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 304 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWQSeries STANDARD RATINGS WV (Vdc) 350 400 450 Cap (F) 1,500 1,800 2,200 2,700 3,300 3,900 3,900 4,700 5,600 5,600 6,800 8,200 10,000 12,000 15,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 4,700 5,600 6,800 8,200 10,000 12,000 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 3,900 4,700 4,700 5,600 6,800 8,200 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 50 x 65 50 x 75 50 x 96 50 x 115 63.5 x 85 50 x 130 63.5 x 96 63.5 x 115 63.5 x 130 76.2 x 96 76.2 x 115 76.2 x 130 76.2 x 155 89 x 130 89 x 155 50 x 65 50 x 75 50 x 85 50 x 96 50 x 115 63.5 x 96 63.5 x 115 63.5 x 130 76.2 x 96 63.5 x 155 76.2 x 115 76.2 x 155 89 x 130 89 x 155 50 x 70 50 x 75 50 x 90 50 x 96 50 x 130 63.5 x 96 63.5 x 115 63.5 x 130 76.2 x 96 63.5 x 155 76.2 x 115 76.2 x 130 76.2 x 155 89 x 130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.09 5.93 7.30 8.76 9.71 11.1 11.1 13.2 15.2 14.3 17.0 19.6 23.4 24.1 29.1 4.55 5.41 6.26 7.30 8.76 10.2 12.0 13.9 13.1 16.5 17.0 21.2 22.0 26.0 3.87 4.36 5.28 5.95 7.54 8.34 9.97 11.4 11.1 13.6 13.2 15.2 18.1 19.2 WV (Vdc) Part No. ERWQ351LGC152MC65M ERWQ351LGC182MC75M ERWQ351LGC222MC96M ERWQ351LGC272MCB5M ERWQ351LGC332MD85M ERWQ351LGC392MCD0M ERWQ351LGC392MD96M ERWQ351LGC472MDB5M ERWQ351LGC562MDD0M ERWQ351LGC562ME96M ERWQ351LGC682MEB5M ERWQ351LGC822MED0M ERWQ351LGC103MEF5M ERWQ351LGC123MFD0M ERWQ351LGC153MFF5M ERWQ401LGC122MC65M ERWQ401LGC152MC75M ERWQ401LGC182MC85M ERWQ401LGC222MC96M ERWQ401LGC272MCB5M ERWQ401LGC332MD96M ERWQ401LGC392MDB5M ERWQ401LGC472MDD0M ERWQ401LGC472ME96M ERWQ401LGC562MDF5M ERWQ401LGC682MEB5M ERWQ401LGC822MEF5M ERWQ401LGC103MFD0M ERWQ401LGC123MFF5M ERWQ451LGC102MC70M ERWQ451LGC122MC75M ERWQ451LGC152MC90M ERWQ451LGC182MC96M ERWQ451LGC222MCD0M ERWQ451LGC272MD96M ERWQ451LGC332MDB5M ERWQ451LGC392MDD0M ERWQ451LGC392ME96M ERWQ451LGC472MDF5M ERWQ451LGC472MEB5M ERWQ451LGC562MED0M ERWQ451LGC682MEF5M ERWQ451LGC822MFD0M 500 550 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 470 680 820 1,000 1,200 1,500 1,500 1,800 1,800 2,200 2,200 2,700 3,300 3,900 4,700 6,800 390 560 680 820 1,200 1,500 1,800 2,200 2,700 3,300 5,600 50 x 60 50 x 65 50 x 75 50 x 85 50 x 96 50 x 115 63.5 x 96 50 x 130 63.5 x 96 63.5 x 115 76.2 x 96 63.5 x 130 76.2 x 115 76.2 x 130 76.2 x 155 89 x 155 50 x 60 50 x 65 50 x 75 50 x 85 50 x 115 63.5 x 96 76.2 x 80 76.2 x 96 76.2 x 115 76.2 x 130 89 x 155 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 2.17 2.70 3.15 3.67 4.22 5.14 5.42 5.95 5.94 7.10 7.30 8.31 9.65 11.1 13.1 15.9 1.98 2.45 2.87 3.32 4.60 5.42 6.12 7.30 8.73 10.2 14.5 Part No. ERWQ501LGC471MC60M ERWQ501LGC681MC65M ERWQ501LGC821MC75M ERWQ501LGC102MC85M ERWQ501LGC122MC96M ERWQ501LGC152MCB5M ERWQ501LGC152MD96M ERWQ501LGC182MCD0M ERWQ501LGC182MD96M ERWQ501LGC222MDB5M ERWQ501LGC222ME96M ERWQ501LGC272MDD0M ERWQ501LGC332MEB5M ERWQ501LGC392MED0M ERWQ501LGC472MEF5M ERWQ501LGC682MFF5M ERWQ551LGC391MC60M ERWQ551LGC561MC65M ERWQ551LGC681MC75M ERWQ551LGC821MC85M ERWQ551LGC122MCB5M ERWQ551LGC152MD96M ERWQ551LGC182ME80M ERWQ551LGC222ME96M ERWQ551LGC272MEB5M ERWQ551LGC332MED0M ERWQ551LGC562MFF5M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWQ series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 305 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWE RWF P300 Series Longer life Rated voltage range : 350 to 550Vdc Endurance with ripple current : 85 2,000 hours RoHS Compliant RWE SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 550Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Rated Voltage (Vdc) 350 to 450V 500 & 550V C(-25)/C(+20) (at 120Hz) 0.7 0.6 When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Capacitance change Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 45050 H B1 F 1 D+1.8max. Sleeve (Pb-free PVC : Black) Vent 6 30050 8 J G1 L+4max. Plastic disk D 35 50 63.5 76.2 35 to 63.5 : G=6 76.2 & 89 : G=5 A 58.0 78.0 90.0 104.5 B 44.0 64.0 76.0 90.0 Clamp Code : C 3600 3 A1 W1 W 48.0 68.0 80.0 93.5 H 3.5 4.5 4.5 4.5 F 12.7 22.4 28.0 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 F 22.4 28.0 31.5 31.5 J 14.0 14.0 14.0 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWE A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680F:681, 6,800F:682) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 500V:501) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 306 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWESeries STANDARD RATINGS WV (Vdc) 350 400 450 Cap (F) 390 680 1,000 1,200 1,500 2,200 3,300 3,300 3,900 4,700 4,700 5,600 6,800 8,200 12,000 330 560 820 1,000 1,200 1,800 2,200 2,700 3,300 3,900 3,900 4,700 5,600 6,800 10,000 270 470 680 820 1,000 1,200 1,500 1,800 2,200 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 35 x 50 35 x 80 35 x 100 35 x 120 50 x 75 50 x 96 50 x 130 63.5 x 96 63.5 x 115 63.5 x 130 76.2 x 96 76.2 x 115 76.2 x 130 76.2 x 155 89 x 155 35 x 50 35 x 80 35 x 100 35 x 120 50 x 75 50 x 96 50 x 130 63.5 x 96 63.5 x 115 63.5 x 130 76.2 x 96 76.2 x 115 76.2 x 130 76.2 x 155 89 x 155 35 x 50 35 x 80 35 x 100 35 x 120 50 x 75 50 x 96 50 x 115 50 x 130 63.5 x 96 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 1.90 2.90 3.80 4.20 4.70 6.30 8.80 8.80 10.3 12.0 11.7 12.6 15.9 19.0 22.5 1.70 2.70 3.40 3.90 4.20 5.70 7.20 7.90 9.50 10.9 10.6 12.6 14.5 17.3 20.5 1.60 2.40 3.10 3.50 3.90 4.70 5.60 6.50 7.20 WV (Vdc) Part No. ERWE351LGB391MA50M ERWE351LGB681MA80M ERWE351LGB102MAA0M ERWE351LGB122MAC0M ERWE351LGC152MC75M ERWE351LGC222MC96M ERWE351LGC332MCD0M ERWE351LGC332MD96M ERWE351LGC392MDB5M ERWE351LGC472MDD0M ERWE351LGC472ME96M ERWE351LGC562MEB5M ERWE351LGC682MED0M ERWE351LGC822MEF5M ERWE351LGC123MFF5M ERWE401LGB331MA50M ERWE401LGB561MA80M ERWE401LGB821MAA0M ERWE401LGB102MAC0M ERWE401LGC122MC75M ERWE401LGC182MC96M ERWE401LGC222MCD0M ERWE401LGC272MD96M ERWE401LGC332MDB5M ERWE401LGC392MDD0M ERWE401LGC392ME96M ERWE401LGC472MEB5M ERWE401LGC562MED0M ERWE401LGC682MEF5M ERWE401LGC103MFF5M ERWE451LGB271MA50M ERWE451LGB471MA80M ERWE451LGB681MAA0M ERWE451LGB821MAC0M ERWE451LGC102MC75M ERWE451LGC122MC96M ERWE451LGC152MCB5M ERWE451LGC182MCD0M ERWE451LGC222MD96M 450 500 550 Cap (F) Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 2,700 3,300 3,300 3,900 4,700 5,600 8,200 120 270 330 390 470 680 820 1,000 1,000 1,500 1,500 1,800 2,200 2,700 3,900 100 180 270 330 390 560 560 680 680 820 820 1,200 1,500 1,800 2,200 3,300 63.5 x 115 63.5 x 130 76.2 x 96 76.2 x 115 76.2 x 130 76.2 x 155 89 x 155 35 x 50 35 x 80 35 x 100 35 x 120 50 x 75 50 x 96 50 x 115 50 x 130 63.5 x 96 63.5 x 115 76.2 x 96 63.5 x 130 76.2 x 115 76.2 x 155 89 x 155 35 x 50 35 x 80 35 x 100 35 x 120 50 x 75 50 x 96 63.5 x 96 50 x 115 63.5 x 115 50 x 130 63.5 x 130 76.2 x 96 76.2 x 115 76.2 x 130 76.2 x 155 89 x 155 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 8.60 10.0 9.80 11.5 13.3 15.7 18.6 0.70 1.20 1.40 1.70 1.80 2.50 2.90 3.40 3.40 4.50 4.60 5.20 6.10 7.70 10.1 0.60 1.00 1.30 1.60 1.70 2.10 2.50 2.70 3.00 3.10 3.50 4.20 5.00 5.80 7.00 9.30 Part No. ERWE451LGC272MDB5M ERWE451LGC332MDD0M ERWE451LGC332ME96M ERWE451LGC392MEB5M ERWE451LGC472MED0M ERWE451LGC562MEF5M ERWE451LGC822MFF5M ERWE501LGB121MA50M ERWE501LGB271MA80M ERWE501LGB331MAA0M ERWE501LGB391MAC0M ERWE501LGC471MC75M ERWE501LGC681MC96M ERWE501LGC821MCB5M ERWE501LGC102MCD0M ERWE501LGC102MD96M ERWE501LGC152MDB5M ERWE501LGC152ME96M ERWE501LGC182MDD0M ERWE501LGC222MEB5M ERWE501LGC272MEF5M ERWE501LGC392MFF5M ERWE551LGB101MA50M ERWE551LGB181MA80M ERWE551LGB271MAA0M ERWE551LGB331MAC0M ERWE551LGC391MC75M ERWE551LGC561MC96M ERWE551LGC561MD96M ERWE551LGC681MCB5M ERWE551LGC681MDB5M ERWE551LGC821MCD0M ERWE551LGC821MDD0M ERWE551LGC122ME96M ERWE551LGC152MEB5M ERWE551LGC182MED0M ERWE551LGC222MEF5M ERWE551LGC332MFF5M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWE series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 307 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWY RWY Series High ripple capability Endurance with ripple current : 5,000 hours at 85 Reduced cost design for three-phase input inverters RoHS Compliant Low price version RWF P300 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.12 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When it is measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting Clamp Code : C 3600 3 A1 W1 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) 30050 Vent 6 45050 8 J G1 L+4max. Plastic disk D 50 63.5 76.2 50 to 76.2 : G=6 89 : G=4 100 : G=10 <Screw specifications> to89 Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 100 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 56.5 K 37.0 43.5 50.0 56.5 63.4 F 22.4 28.0 31.5 31.5 41.5 J 14.0 14.0 14.0 16.0 18.0 Cross-recessed head (phillips) screw : M8x1.25x16 Spring washer,Washer Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. 100 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 2 13 14 15 16 17 18 E RWY A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 620F:621, 4,600F:462) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 308 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWYSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 750 1,100 1,300 1,600 1,800 1,900 2,400 2,800 3,400 3,500 3,800 4,000 5,000 5,600 6,900 7,700 8,400 9,500 11,000 14,000 620 880 1,000 1,400 1,500 1,600 2,000 2,300 2,800 2,900 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 300Hz) 50 x 75 50 x 96 50 x 105 50 x 130 63.5 x 96 50 x 145 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 100 x 190 100 x 220 100 x 270 50 x 75 50 x 96 50 x 105 50 x 130 63.5 x 96 50 x 145 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 5.10 6.90 7.80 9.50 10.0 10.7 12.6 14.3 17.1 16.9 18.8 19.0 23.0 25.3 27.2 29.6 32.9 37.3 42.9 53.1 4.60 6.10 6.80 8.90 9.10 9.90 11.5 13.0 15.5 15.4 WV (Vdc) Part No. ERWY351LGC751MC75M ERWY351LGC112MC96M ERWY351LGC132MCA5M ERWY351LGC162MCD0M ERWY351LGC182MD96M ERWY351LGC192MCE5M ERWY351LGC242MDB5M ERWY351LGC282MDD0M ERWY351LGC342MDF5M ERWY351LGC352MEB5M ERWY351LGC382MDH0M ERWY351LGC402MED0M ERWY351LGC502MEF5M ERWY351LGC562MEH0M ERWY351LGC692MFF5M ERWY351LGC772MFH0M ERWY351LGC842MFK0M ERWY351LGC952MGK0M ERWY351LGC113MGN0M ERWY351LGC143MGT0M ERWY401LGC621MC75M ERWY401LGC881MC96M ERWY401LGC102MCA5M ERWY401LGC142MCD0M ERWY401LGC152MD96M ERWY401LGC162MCE5M ERWY401LGC202MDB5M ERWY401LGC232MDD0M ERWY401LGC282MDF5M ERWY401LGC292MEB5M 400 450 Cap (F) 3,200 3,400 4,200 4,600 5,700 6,400 7,000 7,900 9,400 12,000 500 710 840 1,100 1,200 1,300 1,600 1,800 2,300 2,300 2,500 2,700 3,300 3,700 4,600 5,100 5,700 6,400 7,600 9,500 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 300Hz) 63.5 x 170 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 100 x 190 100 x 220 100 x 270 50 x 75 50 x 96 50 x 105 50 x 130 63.5 x 96 50 x 145 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 89 x 190 100 x 190 100 x 220 100 x 270 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 17.3 17.5 21.1 23.0 24.7 27.0 30.0 34.0 39.6 49.2 4.00 5.20 5.90 7.50 7.80 8.40 9.80 10.9 13.3 13.0 14.5 14.8 17.7 19.5 22.2 24.1 27.1 30.6 35.6 43.7 Part No. ERWY401LGC322MDH0M ERWY401LGC342MED0M ERWY401LGC422MEF5M ERWY401LGC462MEH0M ERWY401LGC572MFF5M ERWY401LGC642MFH0M ERWY401LGC702MFK0M ERWY401LGC792MGK0M ERWY401LGC942MGN0M ERWY401LGC123MGT0M ERWY451LGC501MC75M ERWY451LGC711MC96M ERWY451LGC841MCA5M ERWY451LGC112MCD0M ERWY451LGC122MD96M ERWY451LGC132MCE5M ERWY451LGC162MDB5M ERWY451LGC182MDD0M ERWY451LGC232MDF5M ERWY451LGC232MEB5M ERWY451LGC252MDH0M ERWY451LGC272MED0M ERWY451LGC332MEF5M ERWY451LGC372MEH0M ERWY451LGC462MFF5M ERWY451LGC512MFH0M ERWY451LGC572MFK0M ERWY451LGC642MGK0M ERWY451LGC762MGN0M ERWY451LGC952MGT0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 120 0.83 300 1.00 1k 1.25 3k 1.33 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for RWY series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 309 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWL RWL Series Longer life High ripple capability For train systems and high power consuming inverter circuits Endurance with ripple current : 20,000 hours at 85 RoHS Compliant RWF P300 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 20,000 hours at 85. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 D+1.8max. F1 Sleeve (Pb-free PVC : Black) Vent 6 305 455 8 J G1 L+4max. Plastic disk D 63.5 76.2 63.5 : G=6 76.2 & 89 : G=5 Clamp Code : C 360 3 A1 W1 A B W F 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal J F K E 38.1 43.5 28.0 14.0 44.5 50.0 31.5 14.0 50.8 56.5 31.5 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RW L A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 310 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWLSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 3,300 3,900 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 12,000 2,700 3,300 3,900 3,900 4,700 4,700 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 63.5 x 190 76.2 x 155 76.2 x 170 89 x 155 89 x 190 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 11.1 12.8 15.2 14.7 17.3 16.9 20.0 20.2 23.1 26.6 32.0 10.1 11.7 13.8 14.7 15.8 15.5 WV (Vdc) Part No. ERWL351LGC332MDB5M ERWL351LGC392MDD0M ERWL351LGC472MDF5M ERWL351LGC472MEB5M ERWL351LGC562MDH0M ERWL351LGC562MED0M ERWL351LGC682MDK0M ERWL351LGC682MEF5M ERWL351LGC822MEH0M ERWL351LGC103MFF5M ERWL351LGC123MFK0M ERWL401LGC272MDB5M ERWL401LGC332MDD0M ERWL401LGC392MDF5M ERWL401LGC392MEB5M ERWL401LGC472MDH0M ERWL401LGC472MED0M 400 450 Cap (F) 5,600 5,600 6,800 8,200 10,000 2,200 2,700 2,700 3,300 3,300 3,900 4,700 5,600 5,600 6,800 8,200 Rated ripple current Case size tan (Arms/ DxL(mm) 85, 120Hz) 63.5 x 190 76.2 x 155 76.2 x 170 89 x 155 89 x 190 63.5 x 115 63.5 x 130 76.2 x 115 63.5 x 155 76.2 x 130 63.5 x 170 76.2 x 155 76.2 x 190 89 x 155 89 x 170 89 x 190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.2 18.3 21.0 24.1 29.1 9.10 10.6 11.2 12.7 13.0 14.4 16.7 20.1 19.9 23.0 26.4 Part No. ERWL401LGC562MDK0M ERWL401LGC562MEF5M ERWL401LGC682MEH0M ERWL401LGC822MFF5M ERWL401LGC103MFK0M ERWL451LGC222MDB5M ERWL451LGC272MDD0M ERWL451LGC272MEB5M ERWL451LGC332MDF5M ERWL451LGC332MED0M ERWL451LGC392MDH0M ERWL451LGC472MEF5M ERWL451LGC562MEK0M ERWL451LGC562MFF5M ERWL451LGC682MFH0M ERWL451LGC822MFK0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1 .4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for RWL series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 311 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RHA Series RHA Realized higher voltage than RWF series (500 to 650Vdc) Endurance with ripple current : 5,000 hours at 85 Suitable for high voltage inverter RoHS compliant Higher voltage RWF P300 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85 500 to 650Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.6 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) 6 305 Vent 455 8 J G1 L+4max. Plastic disk D 50 63.5 76.2 50 &63.5 : G=6 76.2 &89 : G=5 100 : G=10 <Screw specifications> to89 Plus hexagon-headed screw :M5x0.8x10 Clamp Code : C 360 3 A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 100 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 56.5 K 37.0 43.5 50.0 56.5 63.4 F 22.4 28.0 31.5 31.5 41.5 J 14.0 14.0 14.0 16.0 18.0 Cross-recessed head (phillips) screw : M8x1.25x16 Spring washer,Washer Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. Maximum screw tightening torque :3.23Nm 100 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RH A AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800 F:682, 12,000 F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 500V:501, 650V:651) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 312 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RHASeries STANDARD RATINGS WV (Vdc) 500 550 Cap (F) 1,200 1,500 1,800 2,200 2,700 3,300 3,900 3,900 4,700 5,600 5,600 6,800 8,200 10,000 12,000 15,000 1,000 1,200 1,500 1,800 2,200 2,700 2,700 3,300 3,300 3,900 4,700 4,700 Rated ripple current Case size tan (Arms/ DxL(mm) 85,120Hz) 50x95 50x115 50x130 50x150 63.5x120 63.5x140 63.5x170 76.2x130 76.2x150 76.2x170 89x130 89x150 89x190 89x210 100x210 100x250 50x95 50x110 50x130 63.5x105 63.5x120 63.5x150 76.2x105 63.5x170 76.2x130 76.2x140 76.2x170 89x130 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.90 7.20 8.30 9.80 11.2 13.3 15.7 15.4 18.1 20.8 17.1 20.0 24.4 28.2 32.9 39.8 5.40 6.30 7.60 8.60 10.1 12.4 11.7 14.5 14.2 15.9 19.1 15.6 WV (Vdc) Part No. ERHA501LGC122MC95M ERHA501LGC152MCB5M ERHA501LGC182MCD0M ERHA501LGC222MCF0M ERHA501LGC272MDC0M ERHA501LGC332MDE0M ERHA501LGC392MDH0M ERHA501LGC392MED0M ERHA501LGC472MEF0M ERHA501LGC562MEH0M ERHA501LGC562MFD0M ERHA501LGC682MFF0M ERHA501LGC822MFK0M ERHA501LGC103MFM0M ERHA501LGC123MGM0M ERHA501LGC153MGR0M ERHA551LGC102MC95M ERHA551LGC122MCB0M ERHA551LGC152MCD0M ERHA551LGC182MDA5M ERHA551LGC222MDC0M ERHA551LGC272MDF0M ERHA551LGC272MEA5M ERHA551LGC332MDH0M ERHA551LGC332MED0M ERHA551LGC392MEE0M ERHA551LGC472MEH0M ERHA551LGC472MFD0M 550 600 650 Cap (F) 5,600 6,800 8,200 10,000 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,900 3,900 4,700 4,700 5,600 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 Rated ripple current Case size tan (Arms/ DxL(mm) 85,120Hz) 89x150 89x170 100x170 100x200 63.5x95 63.5x110 63.5x125 76.2x95 63.5x145 76.2x110 63.5x170 76.2x125 76.2x145 76.2x170 89x130 76.2x190 89x150 89x170 63.5x100 63.5x110 63.5x130 63.5x150 63.5x170 76.2x150 76.2x170 89x155 89x190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.2 21.1 24.8 29.4 6.70 8.00 9.30 9.10 11.0 10.8 13.1 12.6 14.9 17.3 14.2 20.0 16.6 19.1 6.30 7.20 8.60 10.1 11.7 13.6 15.8 15.3 18.4 Part No. ERHA551LGC562MFF0M ERHA551LGC682MFH0M ERHA551LGC822MGH0M ERHA551LGC103MGL0M ERHA601LGC122MD95M ERHA601LGC152MDB0M ERHA601LGC182MDC5M ERHA601LGC182ME95M ERHA601LGC222MDE5M ERHA601LGC222MEB0M ERHA601LGC272MDH0M ERHA601LGC272MEC5M ERHA601LGC332MEE5M ERHA601LGC392MEH0M ERHA601LGC392MFD0M ERHA601LGC472MEK0M ERHA601LGC472MFF0M ERHA601LGC562MFH0M ERHA651LGC102MDA0M ERHA651LGC122MDB0M ERHA651LGC152MDD0M ERHA651LGC182MDF0M ERHA651LGC222MDH0M ERHA651LGC272MEF0M ERHA651LGC332MEH0M ERHA651LGC392MFF5M ERHA651LGC472MFK0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.2 1k 1.3 3k 1.4 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RHA series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 313 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 FTP Series Ideal for inverter smoothing capacitors such as Electric Vehicles, Hybrid Cars, etc. Endurance with ripple current : 5,000 hours at 85 Rated voltage range : 63 to 450Vdc Lower profile offers drastic space saving compared with conventional cylindrical type Superior heat radiation realizes higher ripple current RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85 (63100Vdc),-25 to +85 (350450Vdc) 63 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) 63 to 100Vdc : C(-40)/C(+20)0.6 (at 120Hz) 350 to 450Vdc : C(-25)/C(+20)0.7 The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Capacitance change Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Terminal Code : LG Code : L Size Code : R 61+3max. 2-M5 310.5 70+3max. 67+3max. Vent Vent 2-M5 L+3max. 23+3max. L+2max. L+11max. 2.40.5 26+3max. Plastic disk 32+3max. Plastic disk PART NUMBERING SYSTEM 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 35+3max. L+12max. 2.90.5 <Screw specifications> Plus hexagon-headed screw: M5x0.8 Maximum screw tightening torque: 3.23Nm * Polyolefin is available upon request. 1 28.60.5 Sleeve(Pb-free PVC : Black) Sleeve (Pb-free PVC : Black) 64+3max. Size 17 SIZE CODE 18 Code E F T P AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 10,000F:103) Mounting clamp code Terminal code Voltage code (ex. 63V:630, 100V:101, 450V:451) Series code Category L50 L75 L95 R50 R75 R95 Case size HxWxL (mm) 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 314 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 FTPSeries STANDARD RATINGS WV (Vdc) 63 80 100 Cap (F) 6,000 12,000 17,000 7,400 15,000 21,000 4,300 8,600 12,000 5,300 10,000 15,000 2,900 5,700 8,100 3,600 7,100 10,000 Rated ripple Case size current tan HxWxL(mm) (Arms/ 85, 10kHz) 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 14.0 19.0 22.0 16.1 21.7 25.3 14.0 19.0 22.0 16.1 21.7 25.3 14.0 19.0 22.0 16.1 21.7 25.3 WV (Vdc) Part No. EFTP630LGN602ML50M EFTP630LGN123ML75M EFTP630LGN173ML95M EFTP630LGN742MR50M EFTP630LGN153MR75M EFTP630LGN213MR95M EFTP800LGN432ML50M EFTP800LGN862ML75M EFTP800LGN123ML95M EFTP800LGN532MR50M EFTP800LGN103MR75M EFTP800LGN153MR95M EFTP101LGN292ML50M EFTP101LGN572ML75M EFTP101LGN812ML95M EFTP101LGN362MR50M EFTP101LGN712MR75M EFTP101LGN103MR95M 350 400 450 Cap (F) Rated ripple Case size current tan HxWxL(mm) (Arms/ 85, 10kHz) 400 800 1,100 490 970 1,400 330 660 930 400 800 1,100 270 540 760 330 660 930 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 26x70x50 26x70x75 26x70x95 35x64x50 35x64x75 35x64x95 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 10.6 15.7 18.7 11.9 17.6 21.0 10.6 15.7 18.7 11.9 17.6 21.0 10.1 15.0 18.0 11.4 16.7 20.1 Part No. EFTP351LGN401ML50M EFTP351LGN801ML75M EFTP351LGN112ML95M EFTP351LGN491MR50M EFTP351LGN971MR75M EFTP351LGN142MR95M EFTP401LGN331ML50M EFTP401LGN661ML75M EFTP401LGN931ML95M EFTP401LGN401MR50M EFTP401LGN801MR75M EFTP401LGN112MR95M EFTP451LGN271ML50M EFTP451LGN541ML75M EFTP451LGN761ML95M EFTP451LGN331MR50M EFTP451LGN661MR75M EFTP451LGN931MR95M Improvement of space factor and heat radiation Dead spaces are found in the conventional cylindrical shape. But lower profile offers reduced dead space, and makes the equipment smaller in size. Moreover, the internal element of the lower profile capacitor is in greater contact with the can. This greatly improves the heat dissipation compared with the cylindrical shape. Cylindrical shape FTP series Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 315 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS long life screw terminals ,105 LXA LXA Series Long life Rated voltage range up to 525Vdc Endurance with ripple current : 5,000 hours at 105 (2,000 hours for 500Vdc & 525Vdc) High reliability products RoHS Compliant KMH P292 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 (10 to 100Vdc) -25 to +105 (160 to 525Vdc) 10 to 525Vdc -10 to +50% (T) (10 to 250Vdc) 20% (M) (350 to 525Vdc) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance See STANDARD RATINGS (10 to 250Vdc) (at 20, 120Hz) (at 20 after 5 minutes) 0.20max. (350 to 525Vdc) (at 20, 120Hz) Capacitance change C(-40)/C(+20)0.6(10 to 100Vdc) C(-25)/C(+20)0.7(160 to 250Vdc) (at 120Hz) C(-25)/C(+20)0.65(350 to 525Vdc) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (2,000 hours for 500 & 525Vdc products) at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 10 to 250Vdc 350 to 525Vdc Capacitance change 15% of the initial value 20% of the initial value D.F. (tan) 150% of the initial specified value 200% of the initial specified value Leakage current The initial specified value The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B A1 W1 Vent 6 305 8 J G1 L+4max. Plastic disk D G 10 to 250Vdc 350 to 525Vdc 6 6 5 6 5 4 D 63.5 76.2 89 35 50 63.5 76.2 A 58 78 90 104.5 B 44 64 76 90 W 48 68 80 93.5 H 3.5 4.5 4.5 4.5 Code : C 455 H B1 F1 D+1.8max. Sleeve (Pb-free PVC : Brown) Mounting Clamp 360 3 F 12.7 22.4 28.0 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 J 14.0 14.0 14.0 16.0 F 22.4 28.0 31.5 31.5 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XA AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code (ex. M, T) Capacitance code (ex. 390F:391, 3,300F:332) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 10V:100, 100V:101, 525V:5C1) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 316 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS long life screw terminals ,105 LXASeries STANDARD RATINGS WV (Vdc) 10 16 25 35 50 Cap (F) 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 3,900 4,700 5,600 6,800 8,200 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 35 x 80 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 100 63.5 x 100 63.5 x 100 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 80 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 80 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 80 35 x 80 35 x 80 0.45 0.45 0.45 0.45 0.50 0.60 0.60 0.70 0.70 0.80 0.80 1.00 1.20 1.20 1.40 0.45 0.45 0.45 0.45 0.50 0.50 0.50 0.60 0.60 0.70 0.70 0.80 0.80 0.80 1.00 1.20 0.35 0.35 0.35 0.35 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.60 0.60 0.75 0.75 1.00 0.30 0.30 0.30 0.30 0.30 0.35 0.40 0.40 0.40 0.45 0.45 0.45 0.50 0.60 0.60 0.20 0.25 0.25 0.25 0.25 4.30 4.70 5.30 6.10 6.20 6.80 7.80 8.50 9.50 11.0 12.1 13.2 14.4 17.0 18.6 2.90 3.50 3.90 4.30 4.80 5.30 6.20 6.30 7.60 8.30 9.20 9.90 12.3 14.5 15.2 16.8 3.30 3.70 4.00 4.50 5.00 5.90 6.50 7.90 8.80 9.10 10.6 11.4 12.8 13.7 16.1 16.6 3.00 3.30 3.60 4.10 4.80 5.20 5.90 6.60 7.80 8.00 9.20 11.0 12.7 13.5 16.1 2.00 2.20 2.80 3.00 3.30 Part No. ELXA100LGB273TA80M ELXA100LGB333TA80M ELXA100LGB393TA80M ELXA100LGB473TAA0M ELXA100LGB563TAA0M ELXA100LGB683TAC0M ELXA100LGC823TC80M ELXA100LGC104TCA0M ELXA100LGC124TCA0M ELXA100LGC154TDA0M ELXA100LGC184TDA0M ELXA100LGC224TEA0M ELXA100LGC274TEC0M ELXA100LGC334TEE0M ELXA100LGC394TFE0M ELXA160LGB153TA50M ELXA160LGB183TA80M ELXA160LGB223TA80M ELXA160LGB273TA80M ELXA160LGB333TAA0M ELXA160LGB393TAA0M ELXA160LGB473TAC0M ELXA160LGC563TC80M ELXA160LGC683TCA0M ELXA160LGC823TCC0M ELXA160LGC104TCC0M ELXA160LGC124TDA0M ELXA160LGC154TEA0M ELXA160LGC184TEC0M ELXA160LGC224TEE0M ELXA160LGC274TFE0M ELXA250LGB123TA80M ELXA250LGB153TA80M ELXA250LGB183TA80M ELXA250LGB223TA80M ELXA250LGB273TAA0M ELXA250LGB333TAC0M ELXA250LGC393TC80M ELXA250LGC473TCA0M ELXA250LGC563TCC0M ELXA250LGC683TCC0M ELXA250LGC823TDA0M ELXA250LGC104TDC0M ELXA250LGC124TEA0M ELXA250LGC154TEC0M ELXA250LGC184TEE0M ELXA250LGC224TFE0M ELXA350LGB822TA80M ELXA350LGB103TA80M ELXA350LGB123TA80M ELXA350LGB153TA80M ELXA350LGB183TAA0M ELXA350LGB223TAC0M ELXA350LGC273TC80M ELXA350LGC333TCA0M ELXA350LGC393TCC0M ELXA350LGC473TCC0M ELXA350LGC563TDA0M ELXA350LGC683TDC0M ELXA350LGC823TEC0M ELXA350LGC104TEE0M ELXA350LGC124TFE0M ELXA500LGB392TA50M ELXA500LGB472TA50M ELXA500LGB562TA80M ELXA500LGB682TA80M ELXA500LGB822TA80M WV (Vdc) 50 63 80 100 160 Cap (F) 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 680 820 1,000 1,200 1,500 Rated ripple Case size current tan (Arms/ DxL(mm) 105, 120Hz) 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 63.5 x 100 63.5 x 120 63.5 x 120 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 50 35 x 80 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 100 50 x 120 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 80 0.25 0.25 0.30 0.35 0.35 0.35 0.40 0.40 0.40 0.40 0.45 0.50 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.35 0.35 0.40 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.30 0.30 0.35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.25 0.25 0.30 0.15 0.15 0.15 0.15 0.15 3.70 4.40 4.70 4.80 5.90 7.00 7.60 8.90 9.80 11.9 13.1 14.8 1.90 2.10 2.70 2.90 3.20 3.50 4.20 4.30 4.80 5.90 6.30 6.70 8.80 10.0 10.7 12.5 13.8 1.90 2.20 2.50 2.90 3.10 3.50 4.10 4.80 5.60 6.10 7.40 8.00 9.10 9.70 11.5 12.5 1.40 1.60 1.80 2.00 2.40 2.80 3.10 3.60 4.30 5.00 5.50 6.40 6.60 7.50 8.00 9.40 10.4 1.10 1.20 1.30 1.50 1.70 Part No. ELXA500LGB103TA80M ELXA500LGB123TAA0M ELXA500LGB153TAC0M ELXA500LGC183TC80M ELXA500LGC223TCA0M ELXA500LGC273TCC0M ELXA500LGC333TDA0M ELXA500LGC393TDC0M ELXA500LGC473TDC0M ELXA500LGC563TEC0M ELXA500LGC683TEE0M ELXA500LGC823TFE0M ELXA630LGB272TA50M ELXA630LGB332TA50M ELXA630LGB392TA80M ELXA630LGB472TA80M ELXA630LGB562TA80M ELXA630LGB682TA80M ELXA630LGB822TAA0M ELXA630LGB103TAC0M ELXA630LGC123TC80M ELXA630LGC153TCA0M ELXA630LGC183TCC0M ELXA630LGC223TCC0M ELXA630LGC273TDC0M ELXA630LGC333TEA0M ELXA630LGC393TEC0M ELXA630LGC473TEE0M ELXA630LGC563TFE0M ELXA800LGB222TA50M ELXA800LGB272TA80M ELXA800LGB332TA80M ELXA800LGB392TA80M ELXA800LGB472TAA0M ELXA800LGB562TAA0M ELXA800LGB682TAC0M ELXA800LGC822TC80M ELXA800LGC103TCA0M ELXA800LGC123TCA0M ELXA800LGC153TCC0M ELXA800LGC183TDC0M ELXA800LGC223TEA0M ELXA800LGC273TEC0M ELXA800LGC333TEE0M ELXA800LGC393TFE0M ELXA101LGB122TA50M ELXA101LGB152TA80M ELXA101LGB182TA80M ELXA101LGB222TA80M ELXA101LGB272TA80M ELXA101LGB332TAA0M ELXA101LGB392TAC0M ELXA101LGC472TC80M ELXA101LGC562TCA0M ELXA101LGC682TCC0M ELXA101LGC822TCC0M ELXA101LGC103TDA0M ELXA101LGC123TDC0M ELXA101LGC153TEA0M ELXA101LGC183TEC0M ELXA101LGC223TEE0M ELXA101LGC273TFE0M ELXA161LGB681TA50M ELXA161LGB821TA80M ELXA161LGB102TA80M ELXA161LGB122TA80M ELXA161LGB152TA80M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 317 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS long life screw terminals ,105 LXASeries STANDARD RATINGS WV (Vdc) 160 200 250 350 Cap (F) 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 820 1,500 2,200 2,700 2,700 3,300 3,300 3,900 3,900 5,600 6,800 8,200 8,200 10,000 10,000 15,000 22,000 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 35 x 100 35 x 120 35 x 120 50 x 100 50 x 120 50 x 120 50 x 120 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 100 35 x 120 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 35 x 50 35 x 80 35 x 80 35 x 80 35 x 100 35 x 100 35 x 120 50 x 80 50 x 100 50 x 120 50 x 120 63.5 x 100 63.5 x 120 76.2 x 100 76.2 x 120 76.2 x 140 89 x 140 50 x 60 50 x 85 50 x 105 50 x 125 63.5 x 85 50 x 145 63.5 x 105 63.5 x 125 76.2 x 85 63.5 x 145 76.2 x 125 76.2 x 145 89 x 125 76.2 x 190 89 x 145 89 x 190 89 x 270 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 2.00 2.30 2.70 3.30 3.80 4.20 4.70 5.70 6.40 6.60 7.80 9.50 0.90 1.00 1.10 1.30 1.50 1.70 1.90 2.20 2.70 3.20 3.50 4.00 4.70 5.30 6.30 6.40 7.70 0.70 0.80 0.90 1.00 1.20 1.40 1.60 1.80 2.20 2.60 2.80 3.30 4.00 4.40 5.20 6.10 7.40 3.30 5.20 7.00 8.40 8.10 9.90 9.80 11.5 10.8 14.7 16.8 19.6 18.9 23.0 22.2 30.6 43.5 Part No. ELXA161LGB182TAA0M ELXA161LGB222TAC0M ELXA161LGB272TAC0M ELXA161LGC332TCA0M ELXA161LGC392TCC0M ELXA161LGC472TCC0M ELXA161LGC562TCC0M ELXA161LGC682TDC0M ELXA161LGC822TEA0M ELXA161LGC103TEC0M ELXA161LGC123TEE0M ELXA161LGC153TFE0M ELXA201LGB471TA50M ELXA201LGB561TA80M ELXA201LGB681TA80M ELXA201LGB821TA80M ELXA201LGB102TAA0M ELXA201LGB122TAC0M ELXA201LGB152TAC0M ELXA201LGC182TC80M ELXA201LGC222TCA0M ELXA201LGC272TCC0M ELXA201LGC332TCC0M ELXA201LGC392TDA0M ELXA201LGC472TDC0M ELXA201LGC562TEA0M ELXA201LGC682TEC0M ELXA201LGC822TEE0M ELXA201LGC103TFE0M ELXA251LGB331TA50M ELXA251LGB391TA80M ELXA251LGB471TA80M ELXA251LGB561TA80M ELXA251LGB681TAA0M ELXA251LGB821TAA0M ELXA251LGB102TAC0M ELXA251LGC122TC80M ELXA251LGC152TCA0M ELXA251LGC182TCC0M ELXA251LGC222TCC0M ELXA251LGC272TDA0M ELXA251LGC332TDC0M ELXA251LGC392TEA0M ELXA251LGC472TEC0M ELXA251LGC562TEE0M ELXA251LGC682TFE0M ELXA351LGC821MC60M ELXA351LGC152MC85M ELXA351LGC222MCA5M ELXA351LGC272MCC5M ELXA351LGC272MD85M ELXA351LGC332MCE5M ELXA351LGC332MDA5M ELXA351LGC392MDC5M ELXA351LGC392ME85M ELXA351LGC562MDE5M ELXA351LGC682MEC5M ELXA351LGC822MEE5M ELXA351LGC822MFC5M ELXA351LGC103MEK0M ELXA351LGC103MFE5M ELXA351LGC153MFK0M ELXA351LGC223MFT0M WV (Vdc) 400 450 500 525 Cap (F) 680 1,200 1,800 2,200 2,200 2,700 2,700 3,300 3,300 4,700 4,700 6,800 6,800 8,200 8,200 12,000 18,000 560 1,000 1,200 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 5,600 6,800 6,800 10,000 15,000 470 820 1,000 1,200 1,200 1,500 1,800 2,700 2,700 3,900 3,900 6,800 10,000 390 680 1,000 1,500 1,800 2,200 2,200 2,700 3,300 4,700 4,700 5,600 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 50 x 60 50 x 85 50 x 105 50 x 125 63.5 x 85 50 x 145 63.5 x 105 63.5 x 125 76.2 x 85 63.5 x 145 76.2 x 125 76.2 x 145 89 x 125 76.2 x 190 89 x 145 89 x 190 89 x 270 50 x 60 50 x 85 50 x 105 50 x 125 63.5 x 85 50 x 145 63.5 x 105 63.5 x 125 76.2 x 85 63.5 x 145 76.2 x 105 76.2 x 125 76.2 x 145 89 x 125 76.2 x 190 89 x 145 89 x 190 89 x 270 50 x 60 50 x 85 50 x 105 50 x 125 63.5 x 85 50 x 145 63.5 x 105 63.5 x 145 76.2 x 105 76.2 x 145 89 x 125 89 x 190 89 x 270 50 x 60 50 x 85 50 x 125 63.5 x 105 63.5 x 125 63.5 x 145 76.2 x 105 76.2 x 125 76.2 x 145 76.2 x 190 89 x 145 89 x 190 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.00 4.70 6.30 7.50 7.30 8.90 8.80 10.5 9.90 13.4 13.9 17.9 17.2 20.8 20.1 27.4 39.4 2.60 4.00 4.80 6.40 6.20 7.60 7.50 8.90 8.40 10.6 10.2 11.9 14.0 14.2 17.3 16.7 22.8 32.8 2.40 3.60 4.40 5.20 5.00 6.30 6.80 9.60 9.20 12.7 11.9 18.8 26.8 2.20 3.30 4.80 6.20 7.30 8.60 8.30 9.90 11.7 14.4 13.9 17.1 Part No. ELXA401LGC681MC60M ELXA401LGC122MC85M ELXA401LGC182MCA5M ELXA401LGC222MCC5M ELXA401LGC222MD85M ELXA401LGC272MCE5M ELXA401LGC272MDA5M ELXA401LGC332MDC5M ELXA401LGC332ME85M ELXA401LGC472MDE5M ELXA401LGC472MEC5M ELXA401LGC682MEE5M ELXA401LGC682MFC5M ELXA401LGC822MEK0M ELXA401LGC822MFE5M ELXA401LGC123MFK0M ELXA401LGC183MFT0M ELXA451LGC561MC60M ELXA451LGC102MC85M ELXA451LGC122MCA5M ELXA451LGC182MCC5M ELXA451LGC182MD85M ELXA451LGC222MCE5M ELXA451LGC222MDA5M ELXA451LGC272MDC5M ELXA451LGC272ME85M ELXA451LGC332MDE5M ELXA451LGC332MEA5M ELXA451LGC392MEC5M ELXA451LGC472MEE5M ELXA451LGC562MFC5M ELXA451LGC682MEK0M ELXA451LGC682MFE5M ELXA451LGC103MFK0M ELXA451LGC153MFT0M ELXA501LGC471MC60M ELXA501LGC821MC85M ELXA501LGC102MCA5M ELXA501LGC122MCC5M ELXA501LGC122MD85M ELXA501LGC152MCE5M ELXA501LGC182MDA5M ELXA501LGC272MDE5M ELXA501LGC272MEA5M ELXA501LGC392MEE5M ELXA501LGC392MFC5M ELXA501LGC682MFK0M ELXA501LGC103MFT0M ELXA5C1LGC391MC60M ELXA5C1LGC681MC85M ELXA5C1LGC102MCC5M ELXA5C1LGC152MDA5M ELXA5C1LGC182MDC5M ELXA5C1LGC222MDE5M ELXA5C1LGC222MEA5M ELXA5C1LGC272MEC5M ELXA5C1LGC332MEE5M ELXA5C1LGC472MEK0M ELXA5C1LGC472MFE5M ELXA5C1LGC562MFK0M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 318 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS long life screw terminals ,105 LXASeries RATED RIPPLE CURRENT MULTIPLIERS Frequency Multiplirs Frequency (Hz) 10 to 50Vdc 63 to 80Vdc 100 to 250Vdc 350 to 525Vdc 50 0.95 0.90 0.80 0.80 120 1.00 1.00 1.00 1.00 300 1.03 1.06 1.12 1.20 1k 1.05 1.10 1.22 1.50 3k 1.60 10k 1.09 1.18 1.30 - 50k 1.12 1.22 1.33 - Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is requested in actual use, the rms ripple current has to be reduced. Also, for the LXA series capacitors (350 to 525Vdc products), using them at operating voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 319 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminals ,105 LXR LXR Series Higher ripple Higher ripple capability than LXA series Endurance with ripple current : 5,000 hours at 105 RoHS Compliant LXA P316 SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance (at 20, 120Hz) (at 20 after 5 minutes) 0.15max. (at 20, 120Hz) Capacitance change C (-25)/C(+20)0.7 (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Clamp Code : B Mounting Clamp Code : C 360 3 A1 W1 4.5 B1 D+1.8max. F1 Sleeve (Pb-free PVC : Brown) 6 305 Vent 455 8 J G1 L+4max. Plastic disk D 63.5 76.2 63.5 & 76.2 : G=6 89 : G=4 100 : G=10 <Screw specifications> to89 Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm A 90 104.5 B 76 90 W F 80 28.0 93.5 31.5 D 63.5 76.2 89 100 E 38.1 44.5 50.8 56.5 4.5 Mounting Code : LG K1 E1 Terminal K 43.5 50.0 56.5 63.4 F 28.0 31.5 31.5 41.5 J 14.0 14.0 16.0 18.0 Cross-recessed head (Phillips) screw : M8x1.25x16 Spring washer,Washer Maximum screw tightening torque :6.31Nm * The screw and the mounting clamp are separately supplied and not attached to the product. 100 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XR AAA LG N AAA M AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3,300F:332, 10,000F:103) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351,400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 320 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminals ,105 LXRSeries STANDARD RATINGS WV (Vdc) 350 400 Cap (F) 3,300 3,900 4,700 4,700 5,600 5,600 6,800 8,200 8,200 10,000 12,000 15,000 2,700 3,300 3,900 3,900 4,700 4,700 5,600 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 76.2 x 155 76.2 x 170 89 x 155 89 x 170 100 x 190 100 x 250 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 115 63.5 x 170 76.2 x 130 76.2 x 155 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 14.4 16.6 19.8 19.1 22.5 21.9 26.2 30.0 29.2 33.7 37.8 47.7 13.1 15.2 17.9 18.2 20.5 20.1 23.8 Part No. ELXR351LGC332MDB5M ELXR351LGC392MDD0M ELXR351LGC472MDF5M ELXR351LGC472MEB5M ELXR351LGC562MDH0M ELXR351LGC562MED0M ELXR351LGC682MEF5M ELXR351LGC822MEH0M ELXR351LGC822MFF5M ELXR351LGC103MFH0M ELXR351LGC123MGK0M ELXR351LGC153MGR0M ELXR401LGC272MDB5M ELXR401LGC332MDD0M ELXR401LGC392MDF5M ELXR401LGC392MEB5M ELXR401LGC472MDH0M ELXR401LGC472MED0M ELXR401LGC562MEF5M WV (Vdc) 400 450 Cap (F) 6,800 6,800 8,200 10,000 12,000 2,200 2,700 2,700 3,300 3,300 3,900 4,700 5,600 5,600 6,800 8,200 10,000 12,000 Rated ripple current Case size tan (Arms/ DxL(mm) 105, 120Hz) 76.2 x 170 89 x 155 89 x 170 100 x 190 100 x 220 63.5 x 115 63.5 x 130 76.2 x 115 63.5 x 155 76.2 x 130 63.5 x 170 76.2 x 155 76.2 x 190 89 x 155 89 x 170 89 x 190 100 x 220 100 x 250 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 27.3 26.6 30.5 34.5 40.2 11.8 13.7 14.5 16.5 16.9 18.7 21.7 26.1 24.1 27.8 32.0 36.8 42.7 Part No. ELXR401LGC682MEH0M ELXR401LGC682MFF5M ELXR401LGC822MFH0M ELXR401LGC103MGK0M ELXR401LGC123MGN0M ELXR451LGC222MDB5M ELXR451LGC272MDD0M ELXR451LGC272MEB5M ELXR451LGC332MDF5M ELXR451LGC332MED0M ELXR451LGC392MDH0M ELXR451LGC472MEF5M ELXR451LGC562MEK0M ELXR451LGC562MFF5M ELXR451LGC682MFH0M ELXR451LGC822MFK0M ELXR451LGC103MGN0M ELXR451LGC123MGR0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 120 1.0 300 1.1 1k 1.3 3k 1.4 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LXR series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 321 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Screw terminals, 85 RWV Series For frequently change of regenerative voltage from AC servo amplifier and inverter control Improved the resistance for charge and discharge from same dimension of RWF series Endurance with ripple current : 5,000 hours at 85 Rated voltage range : 350 to 450Vdc, Capacitance 820 to 18,000F RoHS Compliant SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics Insulation Resistance Insulation Withstanding Voltage Charge and Discharge Characteristics -25 to +85 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 120Hz) (at 20 after 5 minutes) 0.25 max. (at 20, 120Hz) Capacitance change C(-25)/C(+20)0.7 (at 120Hz) When measured between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals shorted each other and the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to charge and discharge test with the voltage waveform shown below at room temperature (15 to 35). Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Frequency Number of cycles 3Hz 50 million times Rated voltage 150V Voltage waveform 1 cycle 0V Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Mounting Vent 30 5 6 45 5 8 J G1 D 50 63.5 76.2 Clamp Code : C 360 3 4.5 B1 F1 50 &63.5 : G=6 76.2 &89 : G=5 D+1.8max. Sleeve (Pb-free PVC : Black) L+5max. Clamp Code : B A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 F 22.4 28.0 31.5 31.5 J 14.0 14.0 14.0 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 322 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Screw terminals, 85 RWVSeries PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWV A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 5,600F:562, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" STANDARD RATINGS WV (Vdc) Cap (F) 1,200 1,500 1,800 2,200 2,700 2,700 3,300 4,700 5,600 5,600 350 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 15,000 18,000 1,000 1,200 1,500 2,200 2,200 2,700 3,300 4,700 5,600 5,600 375 6,800 6,800 8,200 8,200 10,000 10,000 10,000 12,000 15,000 15,000 1,000 1,200 1,500 1,800 2,200 400 2,200 2,700 3,900 4,700 5,600 Max. charge Rated ripple current and Case size current Max.discharge DxL(mm) (Arms/ current 85, 120Hz) (Arms/ 3Hz) 50 x 60 50 x 70 50 x 80 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 76.2 x 105 63.5 x 155 63.5 x 170 76.2 x 130 76.2 x 155 89 x 115 76.2 x 170 89 x 130 89 x 155 89 x 170 89 x 190 50 x 60 50 x 70 50 x 80 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 76.2 x 105 63.5 x 155 63.5 x 170 76.2 x 130 89 x 115 76.2 x 155 76.2 x 170 89 x 130 89 x 155 89 x 170 89 x 190 50 x 60 50 x 70 50 x 80 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 4.70 5.50 6.40 7.60 8.80 9.20 10.8 13.2 15.2 15.2 18.1 20.7 20.2 24.2 23.1 27.6 26.6 32.1 33.5 38.5 4.30 4.90 5.80 7.60 8.00 9.20 10.8 13.2 15.2 15.2 18.1 18.9 20.2 20.9 24.2 25.2 24.3 28.7 33.5 35.2 4.30 4.90 5.80 6.90 8.00 8.30 9.80 12.0 13.9 16.4 1.56 1.83 2.13 2.53 2.94 3.06 3.58 4.61 5.30 5.36 6.32 7.25 6.57 8.47 8.10 9.66 9.33 11.2 11.7 13.5 1.42 1.64 1.94 2.54 2.65 3.06 3.58 4.61 5.30 5.36 6.32 6.60 7.09 7.35 8.48 8.85 8.54 10.0 11.7 12.3 1.42 1.64 1.95 2.29 2.65 2.77 3.23 4.21 4.86 5.75 WV (Vdc) Part No. ERWV351LGC122MC60M ERWV351LGC152MC70M ERWV351LGC182MC80M ERWV351LGC222MC96M ERWV351LGC272MCA5M ERWV351LGC272MCB5M ERWV351LGC332MCD0M ERWV351LGC472MDB5M ERWV351LGC562MDD0M ERWV351LGC562MEA5M ERWV351LGC682MDF5M ERWV351LGC822MDH0M ERWV351LGC822MED0M ERWV351LGC103MEF5M ERWV351LGC103MFB5M ERWV351LGC123MEH0M ERWV351LGC123MFD0M ERWV351LGC153MFF5M ERWV351LGC153MFH0M ERWV351LGC183MFK0M ERWV3H1LGC102MC60M ERWV3H1LGC122MC70M ERWV3H1LGC152MC80M ERWV3H1LGC222MC96M ERWV3H1LGC222MCA5M ERWV3H1LGC272MCB5M ERWV3H1LGC332MCD0M ERWV3H1LGC472MDB5M ERWV3H1LGC562MDD0M ERWV3H1LGC562MEA5M ERWV3H1LGC682MDF5M ERWV3H1LGC682MDH0M ERWV3H1LGC822MED0M ERWV3H1LGC822MFB5M ERWV3H1LGC103MEF5M ERWV3H1LGC103MEH0M ERWV3H1LGC103MFD0M ERWV3H1LGC123MFF5M ERWV3H1LGC153MFH0M ERWV3H1LGC153MFK0M ERWV401LGC102MC60M ERWV401LGC122MC70M ERWV401LGC152MC80M ERWV401LGC182MC96M ERWV401LGC222MCA5M ERWV401LGC222MCB5M ERWV401LGC272MCD0M ERWV401LGC392MDB5M ERWV401LGC472MDD0M ERWV401LGC562MDF5M Cap (F) 5,600 5,600 6,800 8,200 8,200 400 8,200 10,000 12,000 12,000 15,000 820 1,000 1,200 1,800 1,800 2,200 2,700 3,300 3,900 4,700 420 4,700 5,600 5,600 6,800 6,800 8,200 8,200 10,000 12,000 12,000 820 1,000 1,200 1,500 1,800 1,800 2,200 3,300 3,900 3,900 450 4,700 4,700 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 Max. charge Rated ripple current and Case size current Max.discharge DxL(mm) (Arms/ current 85, 120Hz) (Arms/ 3Hz) 63.5 x 170 76.2 x 105 76.2 x 130 76.2 x 155 76.2 x 170 89 x 115 89 x 130 89 x 155 89 x 170 89 x 190 50 x 60 50 x 70 50 x 80 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 63.5 x 155 76.2 x 105 63.5 x 170 76.2 x 130 76.2 x 155 89 x 115 76.2 x 170 89 x 130 89 x 155 89 x 170 89 x 190 50 x 60 50 x 70 50 x 80 50 x 96 50 x 105 50 x 115 50 x 130 63.5 x 115 63.5 x 130 76.2 x 105 63.5 x 155 63.5 x 170 76.2 x 130 76.2 x 155 89 x 115 76.2 x 170 89 x 130 89 x 155 89 x 170 89 x 190 17.1 15.2 18.4 21.9 22.8 20.9 24.3 28.7 29.9 35.2 3.80 4.40 5.20 6.80 7.10 8.20 9.60 11.0 12.7 15.0 13.9 17.1 16.6 19.8 19.0 22.7 22.0 26.2 29.9 31.5 3.80 4.40 5.20 6.20 7.10 7.40 8.70 11.0 12.7 13.2 15.0 15.6 16.6 19.8 19.0 22.7 22.0 26.2 27.3 31.5 5.99 5.35 6.47 7.68 8.02 7.35 8.26 10.0 10.5 12.3 1.29 1.50 1.75 2.30 2.40 2.77 3.25 3.87 4.44 5.28 4.92 6.02 5.90 7.02 6.73 8.04 7.78 9.24 10.5 11.0 1.29 1.50 1.74 2.10 2.41 2.51 2.93 3.88 4.44 4.49 5.27 5.50 5.88 7.04 6.72 7.97 7.72 9.22 9.66 11.1 Part No. ERWV401LGC562MDH0M ERWV401LGC562MEA5M ERWV401LGC682MED0M ERWV401LGC822MEF5M ERWV401LGC822MEH0M ERWV401LGC822MFB5M ERWV401LGC103MFD0M ERWV401LGC123MFF5M ERWV401LGC123MFH0M ERWV401LGC153MFK0M ERWV421LGC821MC60M ERWV421LGC102MC70M ERWV421LGC122MC80M ERWV421LGC182MC96M ERWV421LGC182MCA5M ERWV421LGC222MCB5M ERWV421LGC272MCD0M ERWV421LGC332MDB5M ERWV421LGC392MDD0M ERWV421LGC472MDF5M ERWV421LGC472MEA5M ERWV421LGC562MDH0M ERWV421LGC562MED0M ERWV421LGC682MEF5M ERWV421LGC682MFB5M ERWV421LGC822MEH0M ERWV421LGC822MFD0M ERWV421LGC103MFF5M ERWV421LGC123MFH0M ERWV421LGC123MFK0M ERWV451LGC821MC60M ERWV451LGC102MC70M ERWV451LGC122MC80M ERWV451LGC152MC96M ERWV451LGC182MCA5M ERWV451LGC182MCB5M ERWV451LGC222MCD0M ERWV451LGC332MDB5M ERWV451LGC392MDD0M ERWV451LGC392MEA5M ERWV451LGC472MDF5M ERWV451LGC472MDH0M ERWV451LGC562MED0M ERWV451LGC682MEF5M ERWV451LGC682MFB5M ERWV451LGC822MEH0M ERWV451LGC822MFD0M ERWV451LGC103MFF5M ERWV451LGC103MFH0M ERWV451LGC123MFK0M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 323 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Screw terminals, 85 RWVSeries RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.1 1k 1.3 3k 1.4 Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWV series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 324 CAT. No. E1001O Return Group Chart Screw Terminal Aluminum Electrolytic Capacitors (UNITED CHEMI-CON, INC. Products) (Large Capacitors) 325 Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series New! U37F L ARGE CAN 85C Large Can Screw Terminals General Purpose U37 Grade High Ripple 350 to 500VDC Ratings RoHS Compliant 5,000 Hours Lifetime at 85C Up to 150,000 Hours Useful Life The U37F series is a general purpose, screw mount U37 grade series specifically designed to provide the ripple current capability and long life required for high reliability inverter applications.The U37F has an endurance rating of 5,000 hours at 85C with the rated ripple current applied. The useful life can exceed 150,000 hours at 40C and 1.5x the ripple current. These capacitors are available in a variety of high current English or Metric thread terminals. Mounting options include a three-footed clamp or bottom threaded stud. Custom designs are also available. Summary of Specifications Screw terminals: high and low post, English and Metric thread. Capacitance range: 1,500 to 22,000F. Voltage range: 350 to 500VDC. Category temperature range: 40C to 85C. Leakage current: 0.02CV(A) or 5mA, whichever is smaller, after 5 minutes at 25C. Standard capacitance tolerance: 20% Nominal case size (DL): D = 50mm (2.000") to 89mm (3.500"); L = 92mm (3.625") to 219mm (8.625"). Rated lifetime: 5,000 hours at 85C with rated ripple current applied. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 3 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 326 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! U37F Specifications - Screw Terminals Item Characteristics Category Temperature Range 40 to 85C Rated Voltage Range 350 to 500VDC Capacitance Range 1,500 to 22,000F at 25C, 120Hz Capacitance Tolerance 20% ( M ) at 25C, 120Hz Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at 25C. Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V ) U37F L ARGE CAN 85C Rated Ripple Current Multipliers Ambient Temperature (C ) 45C 65C 85C 2.82 1.73 1.00 Frequency (Hz ) DC Rated Voltage 50Hz 120Hz 300Hz 1kHz 3kHz 10kHz 350 -500V 0.80 1.00 1.20 1.30 1.40 1.41 To determine maximum ripple current at a specified temperature and frequency, use the appropriate multiplier shown. Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to 25C after subjecting them to DC voltage for 5,000 hours at 85C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit Useful Life Shelf Life With specified standard voltage and ripple current applied, typical life as function of ambient temperature is listed below. 85C 6,500 hours max. 65C 23,800 hours max. 45C 124,700 hours max. Capacitance change: 30% from initial measurement ESR change : 300% of initial specified limit Leakage current : initial specified limit The following specifications shall be satisfied when the capacitors are restored to 25C after exposing them for 500 hours at 85C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit Vibration Rating Maximum Tightening Torque 10 -55Hz, 10g sinusoidal in three axes, 2 hours per axis. HP Terminal Code Typical Inductance (nH) at 1MHz Custom Designs HL 10 - 32 NF- 2B Thread Size CD CP CH 1/4 - 28 M5x0.8 - 6H CA NF- 2B CS M6x1- 6H 3 Threads Engaged 2.0 N * m ( 18.0 in * lb) 4.0 N * m ( 35.0 in * lb) 6 Threads Engaged 2.8 N * m ( 25.0 in * lb) 6.2 N * m ( 55.0 in * lb) Terminal Code Case Diameter (mm ) HP HL CD CP CH CA CS O 50.8 -- -- NA NA NA NA NA O 63.5 -- -- -- -- -- -- -- O 76.2 30 30 25 20 25 20 25 O 89.0 30 30 25 20 25 20 25 Custom CV values per case size and termination type may be available upon request. Contact appropriate representative with specific requirements. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 4 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 327 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! U37F Useful Life Useful Life: 6,500 Hours at 85C 3.0 The life expectancy of a capacitor is shown as a function of ambient temperature and ripple current load. 2.0 6 ,5 1.5 hrs rs 65 70 75 80 L ARGE CAN 85C 60 hrs 00 0h 55 00 0 10, ,00 hrs 50 25 000 45 50, 40 rs rs 0.0 00 h 00 h 0.5 100,0 1.0 150,0 Ir/ Ir (rated) ratio 2.5 85 Ambient temperature (C) U37F Diagram of Dimensions - Screw Terminals Large Can / Screw Terminals Unit: mm (inches) Case Dimensions and Standard Box Quantities OD 2.0 (0.080) L 1.0 (0.040) F 0.25 (0.010) Standard Box Quantity CB7 CD0 50.8 (2.000) 117 (4.625) 130 (5.125) 22.2 (0.875) 49 63.5 (2.500) 92 (3.625) 105 (4.125) 117 (4.625) 130 (5.125) 143 (5.625) 28.6 (1.125) 20 76.2 (3.000) 0092 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 181 (7.125) 219 (8.625) 31.8 (1.250) 92 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 155 (6.125) 190 (7.500) 219 (8.625) 31.8 (1.250) D92 DA5 DB7 DD0 DE3 Vent F Case Size Code E92 EA5 EB7 EE3 EJ1 EM9 S T F92 FA5 FB7 FE3 FF5 FK0 FM9 J Black Insulating Sleeve (see note) L 89.0 (3.500) 16 09 05 H Note: In some cases, the color of the sleeve may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. Insulating End Disk D Terminal Specifications Terminal Code HP HL CD CP CH CA CS Available Case Diameter Code OD mm (inches) Thread Size Minimum Thread Depth C C D-E D-F D-F D-F D-F 50.8 (2.000) 50.8 (2.000) 63.5 - 76.2 (2.500 - 3.000) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 10 - 32 NF- 2B M5x0.8 - 6H M5x0.8 - 6H 1/4 - 28 NF- 2B 1/ - 28 NF- 2B 4 M6x1- 6H M6x1- 6H 9.5 (0.375) 09.5 (0.375) 08.5 (0.335) 08.7 (0.344) 11.9 (0.468) 08.7 (0.344) 11.9 (0.468) OD H OS OT J 0.5 (0.020) 2.0 (0.080) 0.25 (0.010) 0.25 (0.010) 6.4 (0.250) 6.4 (0.250) 5.0 (0.200) 2.4 (0.093) 6.4 (0.250) 2.4 (0.093) 6.4 (0.250) LJ LJ LJ LJ LJ LJ LJ 08.0 (0.313) 8.0 (0.313) 13.0 (0.512) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 11.1 (0.438) 11.1 (0.438) 18.8 (0.740) -- -- -- -- Mounting Hardware is optional. Refer to hardware specifications on the following page. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 328 5 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! Mounting Hardware - Screw Terminals Type C: Three-Footed Clamp Unit: mm (inches) 360 3 30 455 15 D L ARGE CAN 85C A B U37F T J G K 5.10.5 (2 holes) (0.2010.020) R Clamp: Zinc with silver trivalent chromate post treatment. S Hardware: Screw, washer and hexagon nut included with each clamp. Type C: Clamp Dimensions Mounting Code Case OD A B G J K R S T 1.0 (0.040) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 0.5 (0.020) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) C 50.8 (2.000) 31.8 (1.250) 36.5 (1.437) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 63.5 (2.500) 38.1 (1.500) 42.9 (1.689) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 76.2 (3.000) 44.5 (1.750) 49.2 (1.937) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 1.0 (0.040) C 89.0 (3.500) 50.8 (2.000) 56.5 (2.224) 16.0 (0.630) 4.5 (0.177) 8.0 (0.313) 21.0 (0.827) 9.0 (0.354) 1.0 (0.040) Type S: Stud Mounting Q M P T N Insulated Plastic Hex Nut R K Mounting Nut - Order Separately The insulated plastic mounting nut is not included with stud mount capacitor orders. It must be ordered separately. See available part numbers below. D Type S: Stud Dimensions Mounting Nut Dimensions Mounting Code P 1.0 (0.040) T Thread Size Part Number OK 2.0 (0.080) M 1.0 (0.040) N 1.0 (0.040) OQ 1.0 (0.040) R 1.0 (0.040) S 16.0 (0.630) M12 50-8D 30.0 (1.181) 19.0 (0.748) 18.0 (0.709) 22.0 (0.866) 1.40 (0.055) 50-8E 38.0 (1.496) 19.0 (0.748) 18.0 (0.709) 30.0 (1.181) 1.40 (0.055) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 6 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 329 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! Part Numbering System for U37F Series When ordering, always specify complete 18-field global part number. 18 Fields 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E 3 7 F 4 0 1 C P N 1 0 3 M E J 1 M 9 8 5 4 3 2 1 U37F 6 L ARGE CAN 85C 7 Supplement Code. Field 18. C = PET insulation with end disk (O 50.8mm only). M = Pb-free PVC insulation with end disk. S = Polyolefin insulation with end disk. Case Size. Fields 15, 16 and 17. The single letter diameter code is inserted in field 15. C = O 50.8mm ( O 2.000") D = O 63.5mm ( O 2.500") E = O 76.2mm ( O 3.000") F = O 89.0mm ( O 3.500") The double character length code is inserted in fields 16 and 17. For lengths 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 92 = 92mm (3.625") A5 = 105mm (4.125") B7 = 117mm (4.625") D0 = 130mm (5.125") E3 = 143mm (5.625") F5 = 155mm (6.125") J1 = 181mm (7.125") K0 = 190mm (7.500") M9 = 219mm (8.625") Capacitance Tolerance. Field 14. M = 20% Capacitance. Fields 11, 12 and 13. Expressed in Microfarads. The first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10F or more. R indicates the decimal point for capacitance less than 10F (e.g. 1R0 = 1.0F; 100 = 10F; 101 = 100F; 102 = 1,000F; 103 = 10,000F ). Mounting Hardware. Field 10. N = None. C = Three-footed clamp. S = Stud mount. The mounting nut is not included with stud mount orders. It must be ordered separately. Terminal Type. Fields 8 and 9. HP = High post 10-32 NF- 2B screw thread. HL = High post M5x0.8 screw thread. CD = M5x0.8 screw thread. CP = Low post 1/4 -28 NF-2B screw thread. CH = High post 1/4 -28 NF-2B screw thread. CA = Low post M6x1 screw thread. CS = High post M6x1 screw thread. DC Rated Voltage. Fields 5, 6 and 7. Expressed in Volts. The first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VDC or more. R indicates the decimal point for rated voltage less than 10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC). Series Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. Capacitor Type. Field 1. Aluminum Electrolytic Capacitor (Polar). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 330 7 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals L ARGE CAN 85C Rated Voltage (WVDC) U37F 350 Volts 400 Volts Surge 400 Volts 450 Volts Surge 420 Volts 470 Volts Surge Capacitance (F ) Global Part Number Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 3,300 3,900 3,300 3,900 4,700 5,600 5,600 4,700 5,600 6,800 8,200 12,000 15,000 6,800 8,200 10,000 12,000 15,000 18,000 22,000 E37F351HPN332MCB7M E37F351HPN392MCD0M E37F351CPN332MD92M E37F351CPN392MDA5M E37F351CPN472MDB7M E37F351CPN562MDD0M E37F351CPN562MDE3M E37F351CPN472ME92M E37F351CPN562MEA5M E37F351CPN682MEB7M E37F351CPN822MEE3M E37F351CPN123MEJ1M E37F351CPN153MEM9M E37F351CPN682MF92M E37F351CPN822MFA5M E37F351CPN103MFB7M E37F351CPN123MFE3M E37F351CPN153MFF5M E37F351CPN183MFK0M E37F351CPN223MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 2,700 3,300 2,700 3,300 3,900 4,700 4,700 3,900 5,600 5,600 8,200 10,000 12,000 5,600 6,800 8,200 10,000 12,000 15,000 18,000 E37F401HPN272MCB7M E37F401HPN332MCD0M E37F401CPN272MD92M E37F401CPN332MDA5M E37F401CPN392MDB7M E37F401CPN472MDD0M E37F401CPN472MDE3M E37F401CPN392ME92M E37F401CPN562MEA5M E37F401CPN562MEB7M E37F401CPN822MEE3M E37F401CPN103MEJ1M E37F401CPN123MEM9M E37F401CPN562MF92M E37F401CPN682MFA5M E37F401CPN822MFB7M E37F401CPN103MFE3M E37F401CPN123MFF5M E37F401CPN153MFK0M E37F401CPN183MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 2,700 3,300 2,700 3,300 3,900 3,900 4,700 3,900 4,700 5,600 6,800 10,000 12,000 5,600 6,800 E37F421HPN272MCB7M E37F421HPN332MCD0M E37F421CPN272MD92M E37F421CPN332MDA5M E37F421CPN392MDB7M E37F421CPN392MDD0M E37F421CPN472MDE3M E37F421CPN392ME92M E37F421CPN472MEA5M E37F421CPN562MEB7M E37F421CPN682MEE3M E37F421CPN103MEJ1M E37F421CPN123MEM9M E37F421CPN562MF92M E37F421CPN682MFA5M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 28 23 28 23 19 16 16 20 17 14 12 8 6 14 12 10 8 6 5 4 10.8 12.2 11.2 12.7 14.5 16.4 17.0 14.5 16.5 18.9 22.2 29.4 35.4 19.1 21.8 25.0 29.3 33.8 40.0 46.7 12.9 14.6 13.4 15.2 17.4 19.7 20.4 17.4 19.8 22.6 26.7 35.2 42.5 22.9 26.2 30.0 35.2 40.5 47.9 56.0 15.1 17.0 15.6 17.7 20.3 22.9 23.7 20.2 23.1 26.4 31.1 41.1 49.6 26.7 30.5 35.0 41.1 47.3 55.9 65.4 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 30 26 30 25 21 19 17 21 17 15 12 9 7 15 12 11 8 7 6 5 10.4 11.6 10.7 12.3 13.8 15.3 16.8 14.3 16.4 18.4 22.3 28.2 34.0 18.6 21.2 23.8 28.9 31.4 38.3 43.9 12.5 13.9 12.9 14.7 16.5 18.3 20.1 17.2 19.6 22.0 26.8 33.8 40.8 22.3 25.5 28.6 34.7 37.7 45.9 52.7 14.6 16.2 15.0 17.2 19.3 21.4 23.5 20.0 22.9 25.7 31.3 39.5 47.6 26.1 29.7 33.4 40.5 44.0 53.6 61.5 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 34 28 34 28 23 23 19 24 20 17 14 10 8 17 14 9.8 11.2 10.1 11.7 13.2 13.7 15.5 13.2 15.1 17.1 20.2 26.8 31.7 17.3 19.9 11.7 13.4 12.1 14.0 15.8 16.4 18.6 15.8 18.1 20.5 24.3 32.2 38.0 20.8 23.8 13.7 15.7 14.1 16.3 18.5 19.1 21.8 18.4 21.1 24.0 28.3 37.5 44.4 24.2 27.8 For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 8 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 331 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37F Series U37F Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 420 Volts 470 Volts Surge Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 8,200 10,000 12,000 15,000 18,000 E37F421CPN822MFB7M E37F421CPN103MFE3M E37F421CPN123MFF5M E37F421CPN153MFK0M E37F421CPN183MFM9M 89 117 89 143 89 155 89 190 89 219 FB7 FE3 FF5 FK0 FM9 2,700 2,700 2,200 2,700 3,300 3,900 4,700 3,900 4,700 5,600 6,800 8,200 12,000 5,600 6,800 6,800 8,200 12,000 15,000 15,000 E37F451HPN272MCB7M E37F451HPN272MCD0M E37F451CPN222MD92M E37F451CPN272MDA5M E37F451CPN332MDB7M E37F451CPN392MDD0M E37F451CPN472MDE3M E37F451CPN392ME92M E37F451CPN472MEA5M E37F451CPN562MEB7M E37F451CPN682MEE3M E37F451CPN822MEJ1M E37F451CPN123MEM9M E37F451CPN562MF92M E37F451CPN682MFA5M E37F451CPN682MFB7M E37F451CPN822MFE3M E37F451CPN123MFF5M E37F451CPN153MFK0M E37F451CPN153MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 1,500 1,800 1,800 2,200 2,700 3,300 3,300 2,700 3,300 3,900 5,600 6,800 8,200 3,900 4,700 5,600 6,800 8,200 10,000 12,000 E37F501HPN152MCB7M E37F501HPN182MCD0M E37F501CPN182MD92M E37F501CPN222MDA5M E37F501CPN272MDB7M E37F501CPN332MDD0M E37F501CPN332MDE3M E37F501CPN272ME92M E37F501CPN332MEA5M E37F501CPN392MEB7M E37F501CPN562MEE3M E37F501CPN682MEJ1M E37F501CPN822MEM9M E37F501CPN392MF92M E37F501CPN472MFA5M E37F501CPN562MFB7M E37F501CPN682MFE3M E37F501CPN822MFF5M E37F501CPN103MFK0M E37F501CPN123MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 12 10 8 6 5 22.7 26.8 30.3 36.5 42.2 27.2 32.1 36.3 43.8 50.7 31.7 37.5 42.4 51.1 59.1 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 34 34 42 34 28 23 19 24 20 17 14 12 8 17 14 14 12 8 6 6 9.8 10.1 9.1 10.5 12.1 13.7 15.5 13.2 15.1 17.1 20.2 24.3 31.7 17.3 19.9 20.6 24.3 30.2 36.5 38.6 11.7 12.1 10.9 12.7 14.6 16.4 18.6 15.8 18.1 20.5 24.3 29.1 38.0 20.8 23.8 24.8 29.1 36.3 43.8 46.3 13.7 14.2 12.8 14.8 17.0 19.1 21.8 18.4 21.1 24.0 28.3 34.0 44.4 24.2 27.8 28.9 34.0 42.3 51.1 54.0 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 63 55 52 43 37 32 29 36 30 25 20 15 12 25 21 18 14 13 10 8 7.2 8.0 8.2 9.4 10.5 11.7 12.8 10.9 12.5 14.0 17.1 21.5 26.0 14.2 16.2 18.2 22.1 24.0 29.2 33.5 8.6 9.6 9.8 11.2 12.6 14.0 15.4 13.1 15.0 16.8 20.5 25.8 31.2 17.1 19.5 21.8 26.5 28.8 35.1 40.2 10.1 11.2 11.5 13.1 14.7 16.3 17.9 15.3 17.5 19.6 23.9 30.1 36.3 19.9 22.7 25.5 30.9 33.6 40.9 46.9 U37F 500 Volts 550 Volts Surge Global Part Number L ARGE CAN 85C 450 Volts 500 Volts Surge Capacitance (F ) For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 332 9 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series New! Large Can Screw Terminals General Purpose U37L L ARGE CAN 85C U37 Grade High Ripple 350 to 500VDC Ratings RoHS Compliant 10,000 Hours Lifetime at 85C Up to 175,000 Hours Useful Life The U37L series is a longer life version of the U37 grade series and is specifically designed to provide the ripple current capability and long life required for high reliability inverter applications. The U37L has an endurance rating of 10,000 hours at 85C with the rated ripple current applied. The useful life can exceed 175,000 hours at 40C and 2x the ripple current. These capacitors are available in a variety of high current English or Metric thread terminals. Mounting options include a three-footed clamp or bottom threaded stud. Custom designs are also available. Summary of Specifications Screw terminals: high and low post, English and Metric thread. Capacitance range: 1,500 to 18,000F. Voltage range: 350 to 500VDC. Category temperature range: 40C to 85C. Leakage current: 0.02CV(A) or 5mA, whichever is smaller, after 5 minutes at 25C. Standard capacitance tolerance: 20% Nominal case size (DL): D = 50mm (2.000") to 89mm (3.500"); L = 92mm (3.625") to 219mm (8.625"). Rated lifetime: 10,000 hours at 85C with rated ripple current applied. 10 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 333 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! U37L Specifications - Screw Terminals Item Characteristics Category Temperature Range 40 to 85C Rated Voltage Range 350 to 500VDC Capacitance Range 1,500 to 18,000F at 25C, 120Hz Capacitance Tolerance 20% ( M ) at 25C, 120Hz Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at 25C. Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V ) Rated Ripple Current Multipliers Ambient Temperature (C ) 45C 65C 85C 2.82 1.73 1.00 Frequency (Hz ) DC Rated Voltage 50Hz 120Hz 300Hz 1kHz 3kHz 10kHz 350 -500V 0.80 1.00 1.20 1.30 1.40 1.41 To determine maximum ripple current at a specified temperature and frequency, use the appropriate multiplier shown. Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to 25C after subjecting them to DC voltage for 10,000 hours at 85C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Useful Life With specified standard voltage and ripple current applied, typical life as function of ambient temperature is listed below. 85C 13,000 hours max. 65C 47,700 hours max. 45C 175,000 hours max. U37L Shelf Life L ARGE CAN 85C Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit Capacitance change: 30% from initial measurement ESR change : 300% of initial specified limit Leakage current : initial specified limit The following specifications shall be satisfied when the capacitors are restored to 25C after exposing them for 500 hours at 85C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit Vibration Rating Maximum Tightening Torque 10 -55Hz, 10g sinusoidal in three axes, 2 hours per axis. HP Terminal Code Typical Inductance (nH) at 1MHz Custom Designs HL 10 - 32 NF- 2B Thread Size CD CP CH 1/4 - 28 M5x0.8 - 6H CA NF- 2B CS M6x1- 6H 3 Threads Engaged 2.0 N * m ( 18.0 in * lb) 4.0 N * m ( 35.0 in * lb) 6 Threads Engaged 2.8 N * m ( 25.0 in * lb) 6.2 N * m ( 55.0 in * lb) Terminal Code Case Diameter (mm ) HP HL CD CP CH CA CS O 50.8 -- -- NA NA NA NA NA O 63.5 -- -- -- -- -- -- -- O 76.2 30 30 25 20 25 20 25 O 89.0 30 30 25 20 25 20 25 Custom CV values per case size and termination type may be available upon request. Contact appropriate representative with specific requirements. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 334 11 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! U37L Useful Life 3.0 Useful Life: 13,000 Hours at 85C The life expectancy of a capacitor is shown as a function of ambient temperature and ripple current load. 2.0 13 ,0 1.5 hrs 60 65 hrs 000 55 00 25, 50 rs 45 hrs rs 40 0h 000 0h 0.0 ,00 , 100 ,00 0.5 50 1.0 5 17 Ir/ Ir (rated) ratio 2.5 70 75 80 85 Ambient temperature (C) Diagram of Dimensions - Screw Terminals Large Can / Screw Terminals Unit: mm (inches) U37L L ARGE CAN 85C Case Dimensions and Standard Box Quantities OD 2.0 (0.080) L 1.0 (0.040) F 0.25 (0.010) Standard Box Quantity CB7 CD0 50.8 (2.000) 117 (4.625) 130 (5.125) 22.2 (0.875) 49 63.5 (2.500) 92 (3.625) 105 (4.125) 117 (4.625) 130 (5.125) 143 (5.625) 28.6 (1.125) 20 76.2 (3.000) 0092 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 181 (7.125) 219 (8.625) 31.8 (1.250) 92 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 155 (6.125) 190 (7.500) 219 (8.625) 31.8 (1.250) D92 DA5 DB7 DD0 DE3 Vent F Case Size Code E92 EA5 EB7 EE3 EJ1 EM9 S T F92 FA5 FB7 FE3 FF5 FK0 FM9 J Black Insulating Sleeve (see note) L 89.0 (3.500) 16 09 05 H Note: In some cases, the color of the sleeve may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. Insulating End Disk D Terminal Specifications Terminal Code HP HL CD CP CH CA CS Available Case Diameter Code OD mm (inches) Thread Size Minimum Thread Depth C C D-E D-F D-F D-F D-F 50.8 (2.000) 50.8 (2.000) 63.5 - 76.2 (2.500 - 3.000) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 10 - 32 NF- 2B M5x0.8 - 6H M5x0.8 - 6H 1/4 - 28 NF- 2B 1/ - 28 NF- 2B 4 M6x1- 6H M6x1- 6H 9.5 (0.375) 09.5 (0.375) 08.5 (0.335) 08.7 (0.344) 11.9 (0.468) 08.7 (0.344) 11.9 (0.468) OD H OS OT J 0.5 (0.020) 2.0 (0.080) 0.25 (0.010) 0.25 (0.010) 6.4 (0.250) 6.4 (0.250) 5.0 (0.200) 2.4 (0.093) 6.4 (0.250) 2.4 (0.093) 6.4 (0.250) LJ LJ LJ LJ LJ LJ LJ 08.0 (0.313) 8.0 (0.313) 13.0 (0.512) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 11.1 (0.438) 11.1 (0.438) 18.8 (0.740) -- -- -- -- Mounting Hardware is optional. Refer to hardware specifications on the following page. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 12 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 335 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! Mounting Hardware - Screw Terminals Type C: Three-Footed Clamp Unit: mm (inches) 360 3 30 455 15 D A B T J G K 5.10.5 (2 holes) (0.2010.020) R Clamp: Zinc with silver trivalent chromate post treatment. S Hardware: Screw, washer and hexagon nut included with each clamp. Case OD A B G J K R S T 1.0 (0.040) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 0.5 (0.020) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) C 50.8 (2.000) 31.8 (1.250) 36.5 (1.437) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 63.5 (2.500) 38.1 (1.500) 42.9 (1.689) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 76.2 (3.000) 44.5 (1.750) 49.2 (1.937) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 1.0 (0.040) C 89.0 (3.500) 50.8 (2.000) 56.5 (2.224) 16.0 (0.630) 4.5 (0.177) 8.0 (0.313) 21.0 (0.827) 9.0 (0.354) 1.0 (0.040) U37L Mounting Code L ARGE CAN 85C Type C: Clamp Dimensions Type S: Stud Mounting Q M P T N Insulated Plastic Hex Nut R K Mounting Nut - Order Separately The insulated plastic mounting nut is not included with stud mount capacitor orders. It must be ordered separately. See available part numbers below. D Type S: Stud Dimensions Mounting Nut Dimensions Mounting Code P 1.0 (0.040) T Thread Size Part Number OK 2.0 (0.080) M 1.0 (0.040) N 1.0 (0.040) OQ 1.0 (0.040) R 1.0 (0.040) S 16.0 (0.630) M12 50-8D 30.0 (1.181) 19.0 (0.748) 18.0 (0.709) 22.0 (0.866) 1.40 (0.055) 50-8E 38.0 (1.496) 19.0 (0.748) 18.0 (0.709) 30.0 (1.181) 1.40 (0.055) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 336 13 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! Part Numbering System for U37L Series When ordering, always specify complete 18-field global part number. 18 Fields 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E 3 7 L 4 0 1 C P S 3 3 2 MD A 5 M 9 8 L ARGE CAN 85C 7 U37L 6 5 Supplement Code. Field 18. C = PET insulation with end disk (O 50.8mm only). M = Pb-free PVC insulation with end disk. S = Polyolefin insulation with end disk. Case Size. Fields 15, 16 and 17. The single letter diameter code is inserted in field 15. C = O 50.8mm ( O 2.000") D = O 63.5mm ( O 2.500") E = O 76.2mm ( O 3.000") F = O 89.0mm ( O 3.500") The double character length code is inserted in fields 16 and 17. For lengths 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 92 = 92mm (3.625") A5 = 105mm (4.125") B7 = 117mm (4.625") D0 = 130mm (5.125") E3 = 143mm (5.625") F5 = 155mm (6.125") J1 = 181mm (7.125") K0 = 190mm (7.500") M9 = 219mm (8.625") Capacitance Tolerance. Field 14. M = 20% Capacitance. Fields 11, 12 and 13. Expressed in Microfarads. The first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10F or more. R indicates the decimal point for capacitance less than 10F (e.g. 3R3 = 3.3F; 330 = 33F; 331 = 330F; 332 = 3,300F; 333 = 33,000F ). Mounting Hardware. Field 10. N = None. C = Three-footed clamp. S = Stud mount. The mounting nut is not included with stud mount orders. It must be ordered separately. 4 Terminal Type. Fields 8 and 9. HP = High post 10-32 NF- 2B screw thread. HL = High post M5x0.8 screw thread. CD = M5x0.8 screw thread. CP = Low post 1/4 -28 NF-2B screw thread. CH = High post 1/4 -28 NF-2B screw thread. CA = Low post M6x1 screw thread. CS = High post M6x1 screw thread. 3 DC Rated Voltage. Fields 5, 6 and 7. Expressed in Volts. The first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VDC or more. R indicates the decimal point for rated voltage less than 10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC). Series Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. Capacitor Type. Field 1. Aluminum Electrolytic Capacitor (Polar). 2 1 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 14 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 337 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 350 Volts 400 Volts Surge Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 3,300 3,300 3,300 3,900 3,900 4,700 5,600 4,700 5,600 6,800 8,200 12,000 15,000 6,800 8,200 8,200 12,000 12,000 15,000 18,000 E37L351HPN332MCB7M E37L351HPN332MCD0M E37L351CPN332MD92M E37L351CPN392MDA5M E37L351CPN392MDB7M E37L351CPN472MDD0M E37L351CPN562MDE3M E37L351CPN472ME92M E37L351CPN562MEA5M E37L351CPN682MEB7M E37L351CPN822MEE3M E37L351CPN123MEJ1M E37L351CPN153MEM9M E37L351CPN682MF92M E37L351CPN822MFA5M E37L351CPN822MFB7M E37L351CPN123MFE3M E37L351CPN123MFF5M E37L351CPN153MFK0M E37L351CPN183MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 2,700 3,300 2,700 3,300 3,900 3,900 4,700 3,900 4,700 5,600 6,800 10,000 12,000 5,600 6,800 8,200 10,000 12,000 15,000 18,000 E37L401HPN272MCB7M E37L401HPN332MCD0M E37L401CPN272MD92M E37L401CPN332MDA5M E37L401CPN392MDB7M E37L401CPN392MDD0M E37L401CPN472MDE3M E37L401CPN392ME92M E37L401CPN472MEA5M E37L401CPN562MEB7M E37L401CPN682MEE3M E37L401CPN103MEJ1M E37L401CPN123MEM9M E37L401CPN562MF92M E37L401CPN682MFA5M E37L401CPN822MFB7M E37L401CPN103MFE3M E37L401CPN123MFF5M E37L401CPN153MFK0M E37L401CPN183MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 2,700 2,900 2,200 2,700 3,300 3,900 4,700 3,900 4,700 5,600 6,800 8,200 12,000 5,600 6,800 E37L421HPN272MCB7M E37L421HPN292MCD0M E37L421CPN222MD92M E37L421CPN272MDA5M E37L421CPN332MDB7M E37L421CPN392MDD0M E37L421CPN472MDE3M E37L421CPN392ME92M E37L421CPN472MEA5M E37L421CPN562MEB7M E37L421CPN682MEE3M E37L421CPN822MEJ1M E37L421CPN123MEM9M E37L421CPN562MF92M E37L421CPN682MFA5M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 29 29 30 26 26 21 18 22 18 15 13 9 7 15 13 13 9 9 7 6 10.6 11.0 10.7 12.2 12.6 14.4 16.3 13.9 15.8 18.1 21.3 28.2 34.0 18.3 21.0 21.8 28.2 29.0 35.0 41.1 12.7 13.1 12.8 14.6 15.2 17.3 19.5 16.7 19.0 21.7 25.6 33.9 40.8 22.0 25.2 26.1 33.8 34.8 42.0 49.4 14.8 15.3 15.0 17.0 17.7 20.2 22.8 19.5 22.1 25.4 29.9 39.5 47.6 25.6 29.3 30.5 39.5 40.6 49.1 57.6 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 35 29 37 30 26 26 21 27 22 18 15 10 9 18 15 13 10 9 7 6 9.5 11.0 9.7 11.2 12.6 13.1 14.9 12.7 14.5 16.4 19.4 25.8 30.4 16.6 19.1 21.8 25.7 29.0 35.0 40.6 11.5 13.1 11.6 13.4 15.2 15.7 17.9 15.2 17.4 19.7 23.3 30.9 36.5 20.0 22.9 26.1 30.9 34.8 42.0 48.7 13.4 15.3 13.6 15.7 17.7 18.4 20.9 17.7 20.3 23.0 27.2 36.1 42.6 23.3 26.7 30.5 36.0 40.6 49.1 56.8 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 35 33 45 37 30 26 21 27 22 18 15 13 9 18 15 9.5 10.3 8.7 10.1 11.6 13.1 14.9 12.7 14.5 16.4 19.4 23.3 30.4 16.6 19.1 11.5 12.3 10.5 12.1 14.0 15.7 17.9 15.2 17.4 19.7 23.3 28.0 36.5 20.0 22.9 13.4 14.4 12.2 14.2 16.3 18.4 20.9 17.7 20.3 23.0 27.2 32.7 42.6 23.3 26.7 U37L 420 Volts 470 Volts Surge Global Part Number L ARGE CAN 85C 400 Volts 450 Volts Surge Capacitance (F ) For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 338 15 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37L Series U37L Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 420 Volts 470 Volts Surge 450 Volts U37L L ARGE CAN 85C 500 Volts Surge 500 Volts 550 Volts Surge Capacitance (F ) Global Part Number Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 6,800 10,000 10,000 12,000 15,000 E37L421CPN682MFB7M E37L421CPN103MFE3M E37L421CPN103MFF5M E37L421CPN123MFK0M E37L421CPN153MFM9M 89 117 89 143 89 155 89 190 89 219 FB7 FE3 FF5 FK0 FM9 2,200 2,200 2,200 2,200 2,700 3,300 3,900 3,300 3,900 4,700 5,600 6,800 10,000 4,700 5,600 5,600 8,200 8,200 12,000 12,000 E37L451HPN222MCB7M E37L451HPN222MCD0M E37L451CPN222MD92M E37L451CPN222MDA5M E37L451CPN272MDB7M E37L451CPN332MDD0M E37L451CPN392MDE3M E37L451CPN332ME92M E37L451CPN392MEA5M E37L451CPN472MEB7M E37L451CPN562MEE3M E37L451CPN682MEJ1M E37L451CPN103MEM9M E37L451CPN472MF92M E37L451CPN562MFA5M E37L451CPN562MFB7M E37L451CPN822MFE3M E37L451CPN822MFF5M E37L451CPN123MFK0M E37L451CPN123MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 1,500 1,500 1,800 2,200 2,200 2,700 2,700 2,700 3,300 3,300 4,700 5,600 8,200 3,900 3,900 4,700 6,800 6,800 8,200 10,000 E37L501HPN152MCB7M E37L501HPN152MCD0M E37L501CPN182MD92M E37L501CPN222MDA5M E37L501CPN222MDB7M E37L501CPN272MDD0M E37L501CPN272MDE3M E37L501CPN272ME92M E37L501CPN332MEA5M E37L501CPN332MEB7M E37L501CPN472MEE3M E37L501CPN562MEJ1M E37L501CPN822MEM9M E37L501CPN392MF92M E37L501CPN392MFA5M E37L501CPN472MFB7M E37L501CPN682MFE3M E37L501CPN682MFF5M E37L501CPN822MFK0M E37L501CPN103MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 15 10 10 9 7 19.8 25.7 26.5 31.3 37.0 23.8 30.9 31.8 37.6 44.5 27.8 36.0 37.1 43.9 51.9 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 43 43 45 45 37 30 26 31 27 22 18 15 10 22 18 18 13 13 9 9 8.6 8.9 8.7 9.1 10.5 12.1 13.6 11.6 13.2 15.1 17.6 21.2 27.8 15.2 17.3 18.0 23.3 24.0 31.3 33.1 10.3 10.7 10.5 11.0 12.6 14.5 16.3 14.0 15.8 18.1 21.2 25.5 33.3 18.3 20.8 21.6 28.0 28.8 37.6 39.8 12.1 12.5 12.2 12.8 14.7 16.9 19.0 16.3 18.5 21.1 24.7 29.7 38.9 21.3 24.2 25.2 32.6 33.6 43.9 46.4 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 64 64 55 45 45 37 37 38 31 31 22 18 13 27 27 22 15 15 12 9 7.1 7.4 7.9 9.1 9.5 10.9 11.3 10.5 12.1 12.6 16.2 19.3 25.2 13.9 14.5 16.5 21.2 21.9 26.7 33.1 8.5 8.9 9.5 11.0 11.4 13.1 13.6 12.6 14.6 15.2 19.4 23.1 30.2 16.6 17.3 19.8 25.5 26.2 32.0 39.8 10.0 10.3 11.1 12.8 13.3 15.3 15.8 14.7 17.0 17.7 22.6 27.0 35.2 19.4 20.2 23.1 29.7 30.6 37.4 46.4 For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 16 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 339 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series New! Large Can Screw Terminals General Purpose U37 Grade High Ripple 350 to 500VDC Ratings RoHS Compliant 15,000 Hours Lifetime at 85C Up to 175,000 Hours Useful Life U37X L ARGE CAN 85C The U37X series is the longest life version of the U37 grade series and is specifically designed to provide the ripple current capability and long life required for high reliability inverter applications. The U37X has an endurance rating of 15,000 hours at 85C with the rated ripple current applied. The useful life can exceed 175,000 hours at 40C and 2.1x the ripple current. These capacitors are available in a variety of high current English or Metric thread terminals. Mounting options include a three-footed clamp or bottom threaded stud. Custom designs are also available. Summary of Specifications Screw terminals: high and low post, English and Metric thread. Capacitance range: 1,200 to 18,000F. Voltage range: 350 to 500VDC. Category temperature range: 40C to 85C. Leakage current: 0.02CV(A) or 5mA, whichever is smaller, after 5 minutes at 25C. Standard capacitance tolerance: 20% Nominal case size (DL): D = 50mm (2.000") to 89mm (3.500"); L = 92mm (3.625") to 219mm (8.625"). Rated lifetime: 15,000 hours at 85C with rated ripple current applied. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 17 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 340 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! U37X Specifications - Screw Terminals Item Characteristics Category Temperature Range 40 to 85C Rated Voltage Range 350 to 500VDC Capacitance Range 1,200 to 18,000F at 25C, 120Hz Capacitance Tolerance 20% ( M ) at 25C, 120Hz Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at 25C. Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V ) Rated Ripple Current Multipliers Ambient Temperature (C ) 45C 65C 85C 2.82 1.73 1.00 Frequency (Hz ) DC Rated Voltage 50Hz 120Hz 300Hz 1kHz 3kHz 10kHz 350 -500V 0.80 1.00 1.20 1.30 1.40 1.41 To determine maximum ripple current at a specified temperature and frequency, use the appropriate multiplier shown. Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to 25C after subjecting them to DC voltage for 15,000 hours at 85C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit Useful Life Shelf Life With specified standard voltage and ripple current applied, typical life as function of ambient temperature is listed below. 85C 20,000 hours max. 65C 71,600 hours max. 45C 175,000 hours max. Capacitance change: 30% from initial measurement ESR change : 300% of initial specified limit Leakage current : initial specified limit The following specifications shall be satisfied when the capacitors are restored to 25C after exposing them for 500 hours at 85C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: 20% from initial measurement ESR change : 200% of initial specified limit Leakage current : initial specified limit L ARGE CAN 85C Vibration Rating U37X Maximum Tightening Torque 10 -55Hz, 10g sinusoidal in three axes, 2 hours per axis. HP Terminal Code Typical Inductance (nH) at 1MHz Custom Designs HL 10 - 32 NF- 2B Thread Size CD CP CH 1/4 - 28 M5x0.8 - 6H CA NF- 2B CS M6x1- 6H 3 Threads Engaged 2.0 N * m ( 18.0 in * lb) 4.0 N * m ( 35.0 in * lb) 6 Threads Engaged 2.8 N * m ( 25.0 in * lb) 6.2 N * m ( 55.0 in * lb) Terminal Code Case Diameter (mm ) HP HL CD CP CH CA CS O 50.8 -- -- NA NA NA NA NA O 63.5 -- -- -- -- -- -- -- O 76.2 30 30 25 20 25 20 25 O 89.0 30 30 25 20 25 20 25 Custom CV values per case size and termination type may be available upon request. Contact appropriate representative with specific requirements. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 18 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 341 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! U37X Useful Life 3.0 Useful Life: 20,000 Hours at 85C The life expectancy of a capacitor is shown as a function of ambient temperature and ripple current load. 2.0 20 1.5 50 55 60 65 rs 45 rs 0h hrs 40 0h ,00 000 hrs 0.0 , 100 000 0.5 ,00 50 1.0 , 175 Ir/ Ir (rated) ratio 2.5 70 75 80 85 Ambient temperature (C) Diagram of Dimensions - Screw Terminals Large Can / Screw Terminals Unit: mm (inches) Case Dimensions and Standard Box Quantities OD 2.0 (0.080) L 1.0 (0.040) F 0.25 (0.010) Standard Box Quantity CB7 CD0 50.8 (2.000) 117 (4.625) 130 (5.125) 22.2 (0.875) 49 63.5 (2.500) 92 (3.625) 105 (4.125) 117 (4.625) 130 (5.125) 143 (5.625) 28.6 (1.125) 20 76.2 (3.000) 0092 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 181 (7.125) 219 (8.625) 31.8 (1.250) 92 (3.625) 105 (4.125) 117 (4.625) 143 (5.625) 155 (6.125) 190 (7.500) 219 (8.625) 31.8 (1.250) D92 DA5 DB7 DD0 DE3 Vent F Case Size Code E92 EA5 EB7 EE3 EJ1 EM9 S T F92 FA5 FB7 FE3 FF5 FK0 FM9 J L 09 05 H U37X L ARGE CAN 85C Black Insulating Sleeve (see note) 89.0 (3.500) 16 Note: In some cases, the color of the sleeve may change slightly due to the operating conditions, however, the discoloration will not impair capacitor function. Insulating End Disk D Terminal Specifications Terminal Code HP HL CD CP CH CA CS Available Case Diameter Code OD mm (inches) Thread Size Minimum Thread Depth C C D-E D-F D-F D-F D-F 50.8 (2.000) 50.8 (2.000) 63.5 - 76.2 (2.500 - 3.000) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 63.5 - 89.0 (2.500 - 3.500) 10 - 32 NF- 2B M5x0.8 - 6H M5x0.8 - 6H 1/4 - 28 NF- 2B 1/ - 28 NF- 2B 4 M6x1- 6H M6x1- 6H 9.5 (0.375) 09.5 (0.375) 08.5 (0.335) 08.7 (0.344) 11.9 (0.468) 08.7 (0.344) 11.9 (0.468) OD H OS OT J 0.5 (0.020) 2.0 (0.080) 0.25 (0.010) 0.25 (0.010) 6.4 (0.250) 6.4 (0.250) 5.0 (0.200) 2.4 (0.093) 6.4 (0.250) 2.4 (0.093) 6.4 (0.250) LJ LJ LJ LJ LJ LJ LJ 08.0 (0.313) 8.0 (0.313) 13.0 (0.512) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 11.1 (0.438) 11.1 (0.438) 18.8 (0.740) -- -- -- -- Mounting Hardware is optional. Refer to hardware specifications on the following page. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 342 19 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! Mounting Hardware - Screw Terminals Type C: Three-Footed Clamp Unit: mm (inches) 360 3 30 455 15 D A B T J G K 5.10.5 (2 holes) (0.2010.020) R Clamp: Zinc with silver trivalent chromate post treatment. S Hardware: Screw, washer and hexagon nut included with each clamp. Type C: Clamp Dimensions Mounting Code Case OD A B G J K R S T 1.0 (0.040) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 0.5 (0.020) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) C 50.8 (2.000) 31.8 (1.250) 36.5 (1.437) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 63.5 (2.500) 38.1 (1.500) 42.9 (1.689) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 0.8 (0.032) C 76.2 (3.000) 44.5 (1.750) 49.2 (1.937) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 1.0 (0.040) C 89.0 (3.500) 50.8 (2.000) 56.5 (2.224) 16.0 (0.630) 4.5 (0.177) 8.0 (0.313) 21.0 (0.827) 9.0 (0.354) 1.0 (0.040) L ARGE CAN 85C Type S: Stud Mounting U37X Q M P T N Insulated Plastic Hex Nut R K Mounting Nut - Order Separately The insulated plastic mounting nut is not included with stud mount capacitor orders. It must be ordered separately. See available part numbers below. D Type S: Stud Dimensions Mounting Nut Dimensions Mounting Code P 1.0 (0.040) T Thread Size Part Number OK 2.0 (0.080) M 1.0 (0.040) N 1.0 (0.040) OQ 1.0 (0.040) R 1.0 (0.040) S 16.0 (0.630) M12 50-8D 30.0 (1.181) 19.0 (0.748) 18.0 (0.709) 22.0 (0.866) 1.40 (0.055) 50-8E 38.0 (1.496) 19.0 (0.748) 18.0 (0.709) 30.0 (1.181) 1.40 (0.055) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 20 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 343 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! Part Numbering System for U37X Series When ordering, always specify complete 18-field global part number. 18 Fields 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E 3 7 X 4 0 1 C P N 4 7 2 M E A 5 M 9 8 7 6 5 Supplement Code. Field 18. C = PET insulation with end disk (O 50.8mm only). M = Pb-free PVC insulation with end disk. S = Polyolefin insulation with end disk. Case Size. Fields 15, 16 and 17. The single letter diameter code is inserted in field 15. C = O 50.8mm ( O 2.000") D = O 63.5mm ( O 2.500") E = O 76.2mm ( O 3.000") F = O 89.0mm ( O 3.500") The double character length code is inserted in fields 16 and 17. For lengths 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 92 = 92mm (3.625") A5 = 105mm (4.125") B7 = 117mm (4.625") D0 = 130mm (5.125") E3 = 143mm (5.625") F5 = 155mm (6.125") J1 = 181mm (7.125") K0 = 190mm (7.500") M9 = 219mm (8.625") Capacitance Tolerance. Field 14. M = 20% Capacitance. Fields 11, 12 and 13. Expressed in Microfarads. The first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10F or more. R indicates the decimal point for capacitance less than 10F (e.g. 4R7 = 4.7F; 470 = 47F; 471 = 470F; 472 = 4,700F; 473 = 47,000F ). Mounting Hardware. Field 10. N = None. C = Three-footed clamp. S = Stud mount. The mounting nut is not included with stud mount orders. It must be ordered separately. 3 DC Rated Voltage. Fields 5, 6 and 7. Expressed in Volts. The first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VDC or more. R indicates the decimal point for rated voltage less than 10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC). Series Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. Capacitor Type. Field 1. Aluminum Electrolytic Capacitor (Polar). 2 1 U37X Terminal Type. Fields 8 and 9. HP = High post 10-32 NF- 2B screw thread. HL = High post M5x0.8 screw thread. CD = M5x0.8 screw thread. CP = Low post 1/4 -28 NF-2B screw thread. CH = High post 1/4 -28 NF-2B screw thread. CA = Low post M6x1 screw thread. CS = High post M6x1 screw thread. L ARGE CAN 85C 4 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 344 21 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 350 Volts 400 Volts Surge 400 Volts U37X L ARGE CAN 85C 450 Volts Surge 420 Volts 470 Volts Surge Capacitance (F ) Global Part Number Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 2,700 3,300 2,700 3,300 3,900 4,700 4,700 3,900 4,700 5,600 8,200 10,000 12,000 5,600 6,800 8,200 12,000 12,000 15,000 18,000 E37X351HPN272MCB7M E37X351HPN332MCD0M E37X351CPN272MD92M E37X351CPN332MDA5M E37X351CPN392MDB7M E37X351CPN472MDD0M E37X351CPN472MDE3M E37X351CPN392ME92M E37X351CPN472MEA5M E37X351CPN562MEB7M E37X351CPN822MEE3M E37X351CPN103MEJ1M E37X351CPN123MEM9M E37X351CPN562MF92M E37X351CPN682MFA5M E37X351CPN822MFB7M E37X351CPN123MFE3M E37X351CPN123MFF5M E37X351CPN153MFK0M E37X351CPN183MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 2,700 2,700 2,700 2,700 3,300 3,900 3,900 3,900 4,700 5,600 6,800 8,200 12,000 5,600 6,800 6,800 10,000 10,000 12,000 15,000 E37X401HPN272MCB7M E37X401HPN272MCD0M E37X401CPN272MD92M E37X401CPN272MDA5M E37X401CPN332MDB7M E37X401CPN392MDD0M E37X401CPN392MDE3M E37X401CPN392ME92M E37X401CPN472MEA5M E37X401CPN562MEB7M E37X401CPN682MEE3M E37X401CPN822MEJ1M E37X401CPN123MEM9M E37X401CPN562MF92M E37X401CPN682MFA5M E37X401CPN682MFB7M E37X401CPN103MFE3M E37X401CPN103MFF5M E37X401CPN123MFK0M E37X401CPN153MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 2,200 2,700 2,200 2,700 3,300 3,900 3,900 3,300 3,900 4,700 5,600 8,200 10,000 4,700 5,600 E37X421HPN222MCB7M E37X421HPN272MCD0M E37X421CPN222MD92M E37X421CPN272MDA5M E37X421CPN332MDB7M E37X421CPN392MDD0M E37X421CPN392MDE3M E37X421CPN332ME92M E37X421CPN392MEA5M E37X421CPN472MEB7M E37X421CPN562MEE3M E37X421CPN822MEJ1M E37X421CPN103MEM9M E37X421CPN472MF92M E37X421CPN562MFA5M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 35 31 37 31 26 23 21 26 22 19 15 11 9 19 16 14 11 10 8 6 9.6 10.6 9.7 11.1 12.4 13.8 15.1 12.7 14.5 16.3 19.8 25.0 30.1 16.2 18.5 20.7 25.2 27.3 33.3 38.2 11.5 12.8 11.6 13.3 14.9 16.5 18.1 15.2 17.4 19.5 23.7 30.0 36.1 19.4 22.2 24.9 30.2 32.8 40.0 45.8 13.4 14.9 13.5 15.5 17.4 19.3 21.2 17.8 20.3 22.8 27.7 35.0 42.2 22.7 25.9 29.0 35.2 38.2 46.6 53.5 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 41 35 43 36 31 27 24 30 25 22 17 13 10 22 19 16 12 11 9 7 8.9 9.9 9.0 10.3 11.6 12.8 14.1 11.8 13.5 15.2 18.4 23.3 28.0 15.1 17.2 19.3 23.4 25.4 31.0 35.6 10.7 11.9 10.8 12.3 13.9 15.4 16.9 14.2 16.2 18.2 22.1 27.9 33.6 18.1 20.6 23.2 28.1 30.5 37.2 42.7 12.5 13.9 12.6 14.4 16.2 18.0 19.7 16.5 18.9 21.2 25.8 32.6 39.3 21.1 24.1 27.0 32.8 35.6 43.4 49.8 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 44 39 47 39 33 29 26 33 28 24 19 14 11 25 21 8.5 9.4 8.6 9.8 11.0 12.2 13.4 11.3 12.9 14.5 17.6 22.2 26.8 14.4 16.4 10.2 11.3 10.3 11.8 13.3 14.7 16.1 13.5 15.5 17.4 21.1 26.6 32.1 17.3 19.7 11.9 13.2 12.0 13.8 15.5 17.1 18.8 15.8 18.0 20.3 24.6 31.1 37.5 20.2 23.0 For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 22 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 345 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 U37X Series U37X Series Engineering Bulletin Mar 2013 New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 420 Volts 470 Volts Surge 450 Volts 500 Volts Surge 500 Volts Global Part Number Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 6,800 8,200 10,000 12,000 15,000 E37X421CPN682MFB7M E37X421CPN822MFE3M E37X421CPN103MFF5M E37X421CPN123MFK0M E37X421CPN153MFM9M 89 117 89 143 89 155 89 190 89 219 FB7 FE3 FF5 FK0 FM9 1,800 2,200 2,200 2,200 2,700 3,300 3,900 3,300 3,900 3,900 5,600 6,800 8,200 3,900 4,700 5,600 8,200 8,200 10,000 12,000 E37X451HPN182MCB7M E37X451HPN222MCD0M E37X451CPN222MD92M E37X451CPN222MDA5M E37X451CPN272MDB7M E37X451CPN332MDD0M E37X451CPN392MDE3M E37X451CPN332ME92M E37X451CPN392MEA5M E37X451CPN392MEB7M E37X451CPN562MEE3M E37X451CPN682MEJ1M E37X451CPN822MEM9M E37X451CPN392MF92M E37X451CPN472MFA5M E37X451CPN562MFB7M E37X451CPN822MFE3M E37X451CPN822MFF5M E37X451CPN103MFK0M E37X451CPN123MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 1,200 1,500 1,500 1,800 2,200 2,700 2,700 2,200 2,700 3,300 3,900 5,600 6,800 3,300 3,900 4,700 5,600 6,800 8,200 10,000 E37X501HPN122MCB7M E37X501HPN152MCD0M E37X501CPN152MD92M E37X501CPN182MDA5M E37X501CPN222MDB7M E37X501CPN272MDD0M E37X501CPN272MDE3M E37X501CPN222ME92M E37X501CPN272MEA5M E37X501CPN332MEB7M E37X501CPN392MEE3M E37X501CPN562MEJ1M E37X501CPN682MEM9M E37X501CPN332MF92M E37X501CPN392MFA5M E37X501CPN472MFB7M E37X501CPN562MFE3M E37X501CPN682MFF5M E37X501CPN822MFK0M E37X501CPN103MFM9M 50 117 50 130 63.5 92 63.5 105 63.5 117 63.5 130 63.5 143 76.2 92 76.2 105 76.2 117 76.2 143 76.2 181 76.2 219 89 92 89 105 89 117 89 143 89 155 89 190 89 219 Rated Ripple Current (A rms) at 85C 120Hz 300Hz >3kHz 18 14 12 10 8 18.4 22.4 24.3 29.6 34.0 22.1 26.8 29.1 35.5 40.7 25.8 31.3 34.0 41.4 47.5 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 51 44 53 44 38 33 30 38 32 27 21 16 13 28 23 20 16 14 11 9 8.0 8.9 8.1 9.2 10.4 11.5 12.6 10.6 12.1 13.6 16.5 20.8 25.1 13.5 15.4 17.3 21.0 22.8 27.8 32.2 9.6 10.6 9.7 11.1 12.4 13.8 15.1 12.7 14.5 16.3 19.8 25.0 30.1 16.2 18.5 20.7 25.2 27.3 33.3 38.6 11.2 12.4 11.3 12.9 14.5 16.1 17.6 14.8 16.9 19.0 23.1 29.2 35.2 18.9 21.6 24.2 29.4 31.9 38.9 45.0 CB7 CD0 D92 DA5 DB7 DD0 DE3 E92 EA5 EB7 EE3 EJ1 EM9 F92 FA5 FB7 FE3 FF5 FK0 FM9 78 68 67 56 48 42 37 48 40 34 26 20 16 35 29 25 19 18 14 12 6.4 7.2 7.2 8.2 9.3 10.3 11.3 9.5 10.8 12.1 14.8 18.6 22.5 12.1 13.8 15.5 18.8 20.4 24.8 28.5 7.7 8.6 8.6 9.9 11.1 12.3 13.5 11.3 13.0 14.6 17.7 22.3 26.9 14.5 16.5 18.5 22.5 24.4 29.8 34.2 9.0 10.0 10.1 11.5 13.0 14.4 15.8 13.2 15.1 17.0 20.7 26.1 31.4 16.9 19.3 21.6 26.3 28.5 34.8 39.9 U37X L ARGE CAN 85C 550 Volts Surge Capacitance (F ) For terminal, mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications are subject to change without notice. Ask for UCC product bulletins and review specifications before purchase and/or use. Please use our products based on parameters specified in our bulletins. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 346 23 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series New! Large Can Toroidal Design Lowest Thermal Resistance Optimum Cooling Capability New Lower Profile Sizes New Heat-Sink Mounting Kit RoHS Compliant (Pb-Free) UTOR TOROIDAL 105C The UTOR series series now now offers offers higher higher capacitance capacitance and ripple current current per case size. The The upgrade upgrade allows allows the reduce thethe size, weight, andand costcost of the bank.bank. Toroidal the inverter inverter designer designertotosignificantly significantly reduce size, weight, of capacitor the capacitor Its geometry ideal for cooling by eitherfor forced air or heat-sink with useheat-sink of a new with mounting kit patented is toroidal geometry is ideal cooling byby either forced air the or by the use option. The heat-sinkkit kit option. option provides optimumkitthermal while maintaining electrical isolation. of a new mounting The heat-sink optiontransfer provides optimum thermal transfer while These capacitors have an endurance rating of 5,000 hours or 20,000 hours 85hours with the maintaining electrical isolation. These capacitors have at an105 endurance rating of at 5,000 at rated ripple current hours applied. The UTOR represents the optimum costThe perUTOR amp ofseries ripplerepresents current for 105C or 20,000 at85C withseries the rated ripple current applied. a screw terminal capacitor. the optimum costmounted per ampelectrolytic of ripple current for a screw terminal mounted electrolytic capacitor. Summary of Specifications Screw terminals, high ripple Metric thread. Capacitance range: 680 to 10,000F. Voltage range: 350 to 500VDC. Operating temperature range: 40C to 105C. Leakage current: 0.02CV(A) or 5mA, whichever is smaller, after 5 minutes at 25C. Standard capacitance tolerance: 20% Nominal case size (DL): D = 76mm (3.000"); L = 54mm (2.125") to 168mm (6.625"). Rated lifetime: 5,000 hours at 105C with rated ripple current applied. 138 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 347 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! UTOR Specifications - Screw Terminals Item Characteristics Category Temperature Range 40 to 105C Rated Voltage Range 350 to 500VDC Capacitance Range 680 to 10,000F at 25C, 120Hz Capacitance Tolerance 20% ( M ) at 25C, 120Hz Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at 25C. Where I = Max. leakage current (A ), C = Nominal capacitance (F ) and V = Rated voltage ( V ) Rated Ripple Current Multipliers Ambient Temperature (C ) 45C 65C 85C 105C 2.45 2.12 1.73 1.00 Cooling Air Velocity Mounting Type Endurance (Load Life) Static 1.0m /s 2.0m /s Clamp Mount 1.00 1.20 1.30 Heat-Sink (air cooled) 1.20 1.45 1.55 Heat-Sink (fluid cooled) 1.35 1.65 1.75 The following specifications shall be satisfied when the capacitors are restored to 25C after subjecting them to DC voltage for 5,000 hours at 105C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. 20% of Capacitance change: of initial initial measured value change : 20% ESR 200% of initial specified specified value value Tan change ( DF ) : 200% Leakage current initial specified specified value value : initial Shelf Test The following specifications shall be satisfied when the capacitors are restored to 25C after exposing them for 1,000 hours at 105C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. 20% of Capacitance change: of initial initial measured value change : 20% Tan change ( DF ) : 200% ESR 200% of initial specified value value : initial Leakage current initial specified specified value value Vibration Rating Maximum Tightening Torque 10 -55Hz, 10g sinusoidal in three axis, 2 hours per axis. 3 Threads Engaged 6 Threads Engaged Terminal Code Thread Size in*lb N*m in*lb N*m CT M5x0.8 18.0 2.0 28.5 3.2 Custom CV values per case size may be available upon request. Contact appropriate representative with specific requirements. UTOR 25nH at 1MHz Custom Designs TOROIDAL 105C Typical Inductance Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 348 139 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! Diagram of Dimensions - Screw Terminals Toroidal Large Can / Screw Terminals Unit: mm and inches F M5 Thread 45 Toroidal Core Vent A S T B J Insulation L H Crimped Case Insulating End-Disk A' D UTOR TOROIDAL 105C Terminal Specifications in Millimeters Terminal Code Thread Size Minimum Thread Depth CT M5x0.8 10.5 Terminal Specifications in Inches J 0.50 OS 0.25 OT 0.25 Terminal Code Thread Size Minimum Thread Depth J 0.020 OS 0.010 OT 0.010 7.0 13.0 18.5 CT M5x0.8 0.413 0.276 0.512 0.728 Case Dimensions in Millimeters OA' Case Dimensions in Inches F 0.25 OA 0.008 OA' 0.012 B 0.020 F 0.010 0.20 0.30 B 0.5 16.3 18.9 9.5 31.8 0.642 0.744 0.374 1.250 Case Size Code OD 2.0 L 2.0 H 1.0 Case Size Code OD 0.080 L 0.080 H 0.040 E54 E67 E79 E92 EA5 EB7 ED0 EE3 EF5 EG8 76 76 76 76 76 76 76 76 76 76 54 67 79 92 105 117 130 143 155 168 61 74 86 99 112 124 137 150 162 175 E54 E67 E79 E92 EA5 EB7 ED0 EE3 EF5 EG8 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 2.125 2.625 3.125 3.625 4.125 4.625 5.125 5.625 6.125 6.625 2.402 2.913 3.386 3.898 4.409 4.882 5.394 5.906 6.378 6.890 OA Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 140 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 349 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! Mounting Hardware - Screw Terminals Type C: Three-Footed Clamp Unit: mm (inches) 360 3 30 455 15 D A B T J G K 5.10.5 (2 holes) (0.2010.020) R Clamp: Zinc with silver trivalent chromate post treatment. S Hardware: Screw, washer and hexagon nut included with each clamp. Type C: Clamp Specifications Mounting Code Case OD C 76.2 (3.000) G J K R S T A B 1.0 (0.040) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 0.5 (0.020) 1.0 (0.040) 1.0 (0.040) 0.5 (0.020) 44.5 (1.750) 49.2 (1.937) 13.3 (0.524) 4.5 (0.177) 7.1 (0.280) 19.1 (0.751) 9.5 (0.374) 1.0 (0.040) UTOR TOROIDAL 105C Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 350 141 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! Mounting Hardware - Screw Terminals Type H: Heat Sink Mounting Kit Unit: mm (inches) M5 x 20 1 Socket Head Tap Screw "A" 7 "A" Lock Washer 2 Retaining Bushing N M 1 2 K Electrical 3 Insulation UL94VW1 >5000V 1W/mk 7 J G T1 3 T F M12 x 16 4 Aluminum Post E 5 Lock Washer 5 6 M12 6 Hexagon 4 Jam Nut TOROIDAL 105C 76.2 UTOR SECTION "A" - "A" KIT ASSEMBLY TOP VIEWS Type H: Heat Sink Mounting Kit Dimensions Dimension Millimeters E 18.6 Max. 0.732 Max. 58 (2.280) F 0.560.05 0.0220.002 71 (2.780) G 2.000.13 0.0800.005 60 (2.362) 83 (3.280) J 8.000.13 0.3150.005 E92 60 (2.362) 96 (3.780) OK 15.240.20 0.6000.008 H EA5 60 (2.362) 109 (4.280) M 6.760.13 0.2660.005 H EB7 60 (2.362) 121 (4.780) N 5.490.13 0.2160.005 H ED0 111 (4.370) 134 (5.280) H EE3 111 (4.370) 147 (5.780) H EF5 111 (4.370) 160 (6.280) H EG8 111 (4.370) 172 (6.780) Mounting Code Case Size Code T 0.2 (0.008) H E54 35 (1.378) H E67 35 (1.378) H E79 H T1 0.5 (0.020) Inches Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 142 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 351 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! Part Numbering System for UTOR Series When ordering, always specify complete 18-field global part number. 18 Fields 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E T O R 4 0 1 C T N 3 9 2 M E A 5 M 9 8 Supplement Code. Field 18. C = PET insulation with end disk. F = Coated can. M = Pb-free PVC insulation with end disk. Case Size. Fields 15, 16 and 17. The single letter diameter code is inserted in field 15. E = O 76.2mm ( O 3.000") The double character length code is inserted in fields 16 and 17. For lengths 99mm, insert the actual length rounded to nearest millimeter. For lengths of 100mm or more, insert the appropriate alpha numeric code as indicated below. 54 = 54mm (2.125") 67 = 67mm (2.625") 79 = 79mm (3.125") 92 = 92mm (3.625") A5 = 105mm (4.125") B7 = 117mm (4.625") D0 = 130mm (5.125") E3 = 143mm (5.625") F5 = 155mm (6.125") G8= 168mm (6.625") 6 Capacitance. Fields 11, 12 and 13. Expressed in Microfarads. The first two digits are significant figures inserted in fields 11 and 12, and the third digit inserted in field 13 indicates the number of zeros for capacitance of 10F or more. R indicates the decimal point for capacitance less than 10F (e.g. 3R9 = 3.9F; 390 = 39F; 391 = 390F; 392 = 3,900F; 393 = 39,000F ). Mounting Hardware. Field 10. N = None. C = Three-footed clamp. H = Heat sink kit. Terminal Type. Fields 8 and 9. CT = M5x0.8 screw thread. DC Rated Voltage. Fields 5, 6 and 7. Expressed in Volts. The first two digits are significant figures inserted in fields 5 and 6, and the third digit inserted in field 7 indicates the number of zeros for rated voltage of 10VDC or more. R indicates the decimal point for rated voltage less than 10VDC (e.g. 4R0 = 4.0VDC; 400 = 40VDC; 401 = 400VDC). Series Name. Fields 2, 3 and 4. Enter the 3-letter/digit series name in fields 2, 3 and 4. If the series name is only 2 letters/digits, place a dash in field 4. For a series name with more than 3 letters/digits, refer to the individual series for the appropriate 3-field series name. Capacitor Type. Field 1. Aluminum Electrolytic Capacitor (Polar). 5 4 3 2 1 UTOR Capacitance Tolerance. Field 14. M = 20% TOROIDAL 105C 7 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 352 143 CAT. No. E1001O Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 105 UTOR Series UTOR Series New! Standard Voltage Ratings - Screw Terminals Rated Voltage (WVDC) 350 Volts 400 Volts Surge 400 Volts 450 Volts Surge 420 Volts 470 Volts Surge 450 Volts UTOR TOROIDAL 105C 500 Volts Surge 500 Volts 550 Volts Surge Capacitance (F ) Global Part Number Nominal Case Size* DL ( mm ) Case Size Code Maximum ESR ( m ) at 25C, 120Hz 1,800 2,700 3,300 4,700 5,600 6,800 8,200 10,000 ETOR351CTN182ME54M ETOR351CTN272ME67M ETOR351CTN332ME79M ETOR351CTN472ME92M ETOR351CTN562MEA5M ETOR351CTN682MED0M ETOR351CTN822MEE3M ETOR351CTN103MEG8M 76 54 76 67 76 79 76 92 76 105 76 130 76 143 76 168 E54 E67 E79 E92 EA5 ED0 EE3 EG8 1,500 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 ETOR401CTN152ME54M ETOR401CTN222ME67M ETOR401CTN272ME79M ETOR401CTN332ME92M ETOR401CTN392MEA5M ETOR401CTN472MEB7M ETOR401CTN562MED0M ETOR401CTN682MEE3M ETOR401CTN822MEG8M 76 54 76 67 76 79 76 92 76 105 76 117 76 130 76 143 76 168 1,200 1,800 2,200 3,300 3,900 4,700 5,600 6,800 ETOR421CTN122ME54M ETOR421CTN182ME67M ETOR421CTN222ME79M ETOR421CTN332ME92M ETOR421CTN392MEA5M ETOR421CTN472MED0M ETOR421CTN562MEE3M ETOR421CTN682MEG8M 1,000 1,500 2,200 2,700 3,300 3,900 4,700 5,600 680 1,000 1,500 1,800 2,200 2,700 3,300 3,900 Rated Ripple Current (A rms) at 105C 120Hz 300Hz >3kHz 44 30 24 17 14 12 10 8 11.8 15.4 17.1 21.6 24.9 30.2 34.5 41.0 14.1 18.5 20.5 26.0 29.9 36.2 41.4 49.2 16.5 21.6 23.9 30.3 34.9 42.2 48.3 57.4 E54 E67 E79 E92 EA5 EB7 ED0 EE3 EG8 53 36 30 24 21 17 14 12 10 10.7 13.9 15.4 18.1 20.8 24.0 27.4 31.4 37.1 12.9 16.7 18.5 21.8 25.0 28.8 32.9 37.7 44.5 15.0 19.5 21.6 25.4 29.1 33.6 38.3 44.0 52.0 76 54 76 67 76 79 76 92 76 105 76 130 76 143 76 168 E54 E67 E79 E92 EA5 ED0 EE3 EG8 89 59 40 32 27 23 19 16 9.3 12.2 14.9 17.5 20.1 24.2 27.6 32.7 11.1 14.6 17.9 21.0 24.1 29.1 33.1 39.2 13.0 17.1 20.9 24.5 28.2 33.9 38.6 45.7 ETOR451CTN102ME54M ETOR451CTN152ME67M ETOR451CTN222ME79M ETOR451CTN272ME92M ETOR451CTN332MEA5M ETOR451CTN392MEB7M ETOR451CTN472MED0M ETOR451CTN562MEF5M 76 54 76 67 76 79 76 92 76 105 76 117 76 130 76 155 E54 E67 E79 E92 EA5 EB7 ED0 EF5 89 59 48 40 32 27 23 19 9.3 12.2 13.5 15.9 18.5 21.1 24.2 28.6 11.1 14.6 16.2 19.0 22.2 25.3 29.1 34.3 13.0 17.1 18.9 22.2 25.9 29.6 33.9 40.1 ETOR501CTN681ME54M ETOR501CTN102ME67M ETOR501CTN152ME79M ETOR501CTN182ME92M ETOR501CTN222MEA5M ETOR501CTN272MEB7M ETOR501CTN332MEE3M ETOR501CTN392MEG8M 76 54 76 67 76 79 76 92 76 105 76 117 76 143 76 168 E54 E67 E79 E92 EA5 EB7 EE3 EG8 206 140 93 78 64 52 42 36 6.5 8.4 10.3 12.0 14.0 16.3 19.6 22.1 7.8 10.1 12.4 14.4 16.8 19.5 23.5 26.5 9.1 11.8 14.4 16.8 19.6 22.8 27.4 31.0 For mounting and construction options, refer to the part numbering system for descriptions and codes. * Refer to diagram of dimensions for detailed case size specifications. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 144 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 353 CAT. No. E1001O Return Group Chart 354 Return Group Chart Technical Note Judicious Use of Aluminum Electrolytic Capacitors Contents 1. Overview of Aluminum Electrolytic Capacitors 11 Basic Model of Aluminum Electrolytic Capacitors 12 Basic Structure of Aluminum Electrolytic Capacitors 13 Features of Capacitor Materials 14 Manufacturing process 2. Basic Performance 21 Basic Electrical Characteristics (capacitance, tan and leakage current) 22 Frequency Characteristics of Impedance 3. Reliability 4. Failure Modes 5. Lifetime of Aluminum Electrolytic Capacitors 51 Ambient Temperature Effect on Lifetime 52 Applying Voltage Effect on Lifetime 53 Ripple Current Effect on Lifetime 54 Charge and Discharge Operation Effect on Lifetime 55 Inrush Current 56 Abnormal Voltage Effect on Lifetime 6. Effect of Halogens 61 Effect of Flux 62 Cleaning Agents 63 Adhesive and Coating Materials 64 Effect of Fumigation 7. Recovery Voltage Phenomena 8. Storage 9. Tips for Selecting Capacitors Appropriate for Individual Applications 91 Input Filtering Capacitors for Switching Mode Power Supplies 92 Output Filtering Capacitors for Switching Mode Power Supplies 93 Filtering Capacitors for Inverter Main Circuits 94 Capacitors for Control Circuits 95 Photoflash Capacitors 355 Return Group Chart TECHNICAL NOTE 1Overview of Aluminum Electrolytic Capacitors d Dielectric 1-1 Basic Model of Aluminum Electrolytic Capacitors S Capacitors are passive components. Among the various kinds of capacitors, aluminum electrolytic capacitors offer larger CV product per case size and lower cost than the others. In principles of capacitor, its fundamental model is shown in Fig. 1 and its capacitance (C) is expressed by Equation (1) below: S F .......................................1 d Dielectric constant Surface area of dielectricm2 Thickness of dielectric m C 8.854 x 10 12 Fig-1 Basic model of capacitor Separator Anode foil Equation (1) shows that the capacitance (C) increases as the dielectric constant () and/or its surface area (S) increases and/or the dielectric thickness (d) decreases. An aluminum electrolytic capacitor comprises a dielectric layer of aluminum oxide (Al2O3), the dielectric constant () of which is 8 to 10. This value is not significantly larger than those of other types of capacitors. However, by extending the surface area (S) of the aluminum foil electrode by means of etching, and by electrochemically forming a thinner but highly voltage-withstandable layer of oxide layer dielectric, the aluminum electrolytic capacitor can offer a larger CV product per case size than other types of capacitors. A basic model of aluminum electrolytic capacitor is shown in Fig. 2. An aluminum electrolytic capacitor comprises: Cathode foil DielectricAl2O3 Electrolyte DA DC LA LC CA RA R CC RC CACCCapacitance due to anode and cathodes foils DADCDiode effects due to oxide layer on anode and cathode foils LALC Inductance due to anode and cathode terminals R Resistance of electrolyte and separator RARCInternal resistance of oxide layer on anode and cathode foils Anode ...Aluminum foil Dielectric...Electrochemically formed oxide layer (Al2O3) on the anode Cathode ...A true cathode is electrolytic solution (electrolyte). Fig-2 Other component materials include a paper separator that holds electrolyte in place and another aluminum foil that functions as a draw-out electrode coming into contact with the true cathode (electrolyte). In general, an aluminum electrolytic capacitor is asymmetrical in structure and polarized. The other capacitor type known as a bi-polar (non-polar) comprises the anodic aluminum foils for both electrodes. Basic model and equivalent circuit of aluminum electrolytic capacitor Lead Wire (Terminal) Aluminum Tab Separator Paper Cathode Foil Anode Foil 1-2 Structure of Aluminum Electrolytic Capacitor The aluminum electrolytic capacitor has, as shown in Fig. 3, a roll of anode foil, paper separator, cathode foil and electrode terminals (internal and external terminals) with the electrolyte impregnated, which is sealed in an aluminum can case with a sealing material. The terminal draw-out structure, sealing material and structure differ depending on the type of the capacitor. Figure 4 shows typical examples. Fig-3 Basic model of element Vent Element Sleeve Can Can Sleeve Coated Can Element Rubber Seal Element Aluminum Tab Lead Wire Terminal Rubber Seal Aluminum Tab Aluminum Tab Terminal Plate Sealing Material Lead Wire Terminal Terminal Surface Mount Type Radial Lead Type Fig-4 Snap-in Type Construction of Aluminum Electrolytic Capacitors Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 356 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 1-3 Features of Capacitor Materials 1-4 Manufacturing Process Aluminum, which is main material in an aluminum electrolytic capacitor, forms an oxide layer (Al2O3) on its surface when the aluminum is set as anode and charged with electricity in electrolyte. The aluminum foil with an oxide layer formed thereon, as shown in Fig. 5, is capable of rectifying electriccurrent in electrolyte. Such a metal is called a valve metal. Etching (for extending the surface area) This etching process serves to extend the surface area of the aluminum foil. This is an AC or DCcurrent-employed electrochemical process for etching the foil surface in a chloride solution. Aluminum base material Etching Model Al2O3 I Formation (for forming a dielectric) 0 This is a process for forming a dielectric layer (Al 2 O 3 ), which is normally performed on the anode aluminum foil. V Forming Model Slitting Fig-5 V-I characteristics of aluminum oxide This is a process for slitting aluminum foils (both the anode and cathode) and paper separators to the specified product size. <Anode aluminum foil> First, the foil material is electromechanically etched in a chloride solution to extend the surface area of the foil. Secondly, for the foil to form an aluminum oxide layer (Al2O3) as a dielectric, more than the rated voltage is applied to the foil in a solution such as ammonium borate. This dielectric layer is as dense and thin as 1.1 - 1.5 nm/volt and showing a high insulation resistance (108 - 109 /m). The thickness of the oxide layer determines the withstand voltage according to their direct proportional relationship. For the etching pits to be shaped to the intended thickness of the oxide layer, the pit patterns have been designed to have efficient surface area extension depending on the intended withstand voltage (see Fig. 6) Winding This is a process for rolling a set of anode and cathode foils into a cylindrical form with a paper separator inserted between them. During this process, an inner terminal (called a tab) is attached to each of the aluminum foils. The roll made at this process is called a capacitor element. This is a process for impregnating the element with electrolyte as a true cathode. The electrolyte also functions to repair the dielectric layer. High Voltage Foil Sealing This process seals the element using the aluminum can case and sealing materials (rubber,rubberlined cover, etc.) for keeping the case airtight. Fracture surface of AC etched foil Fig-6 Slitting Model Lead Wire (Terminal) Anode Foil Separator Paper Cathode Foil Electrolyte Impregnation <Cathode aluminum foil> An etching process is performed to the cathode aluminum foil as well as the anode foil. However, the formation process for oxide layer is generally not performed. Therefore, the surface of the cathode foil only has an oxide layer (Al2O3) that has spontaneously formed, which gives a withstand voltage of about 0.5 volt. Low Voltage Foil Blade Impregnation Aluminum Can Element Aging (reforming) Fracture surface of DC etched foil Replica The process of applying voltage to a post-sealed capacitor at high temperature is called "aging". This serves to repair defective dielectrics that have been made on the foil during the slitting or winding process. Cross section of aluminum etched foilSEM) <Electrolyte> The electrolyte, an ion-conductive liquid functions as a true cathode coming into contact with the dielectric layer on the surface of the anode foil. The cathode foil serves as a collector electrode to connect the true cathode with the external circuit. Electrolyte is an essential material that controls the performance of the capacitor (temperature characteristics, frequency characteristics, service life, etc.). Rubber 100% inspection and packaging After the aging, all products shall undergo testing for checking their electrical characteristics with chip termination, lead reforming, taping etc. finished, and then be packaged. <Paper separator > The separator maintains uniform distribution of the electrolyte and keeps the anode-to-cathode foil distance unchanged. Outgoing inspections Outgoing inspections are performed as per standard inspection procedures. <Can case and sealing materials> An aluminum can case and seal materials mainly consisting of rubber are used for the purpose of keeping airtightness. Shipment Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 357 CAT. No. E1001O Return Group Chart TECHNICAL NOTE Basic Performance Basic Electrical Characteristics 2-1-1 Capacitance Capacitance Change (%) 2-1 Ex. 35V470F Radial Lead Type at 105 The larger the surface area of an electrode is, the higher the capacitance (capacity for storing electricity) is. For aluminum electrolytic capacitors, the capacitance is measured under the standard measuring conditions of 20C and a 120Hz AC signal of about 0.5V. Generally, as the temperature rises, the capacitance increases; as the temperature decreases, the capacitance decreases (Fig. 7). With a higher frequency, the capacitance is smaller; with a lower frequency, the capacitance is larger (Fig. 8). Fig-7 (Fig. 9) is a simplified model of the equivalent circuit shown in (Fig. 2). For an ideal capacitor with an equivalent series resistance of R = 0, the tan shown in (Fig. 10) is zero. For an aluminum electrolytic capacitor, the equivalent series resistance (R) is not zero due to the presence of resistance of the electrolyte and paper separator and other contact resistances. 1/C and R are correlated as shown in (Fig. 10) and Equation (2). -20 0 20 60 80 100 120 20 100 Fig-8 1k 10k Frequency(Hz) 100k 1M Frequency Characteristics of Capacitance Ex. 35V470F Radial Lead Type at 105 1 C Simplified equivalent circuit 0.1 0.01 -60 -40 -20 0 20 1/C 40 60 80 100 120 Temperature() Fig-11 R Fig-10 40 Temperature Characteristics of Capacitance 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 tan Fig-9 L -40 Ex. 35V470F Radial Lead Type at 105 Tan( also called tangent of loss angle or dissipation factor) R -60 Temperature() Capacitance Change (%) 2-1-2 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 Temperature Characteristics of tan Dissipation Factor (tan) 100 2-1-3 Leakage Current (A) R tan CR .......................................2 1/ C 2f Circular constantfFrequency f 120Hz Leakage Current (LC) 80 60 40 20 As a feature of an aluminum electrolytic capacitor, when DC voltage is applied to it, the oxide layer that acts as a dielectric in the electrolyte allows a small amount of electric current to flow in it. The small amount of current is called a leakage current (LC). An ideal capacitor does not allow the leakage current to flow (this is not the case for charging current). 0 0 20 40 60 80 100 120 Time (sec) Leakage Current (A) Fig-12 The leakage current (LC) changes with time as shown in (Fig. 12). Note that LC, decreasing with time, will reach a steady-state value. Therefore, the specifications of LC are defined as a value measured several minutes after the beginning of the application of the rated voltage at 20C. As the temperature rises, the LC increases; as the temperature decreases, the LC decreases (Fig.13). As the applied voltage decreases, the LC decreases. 102 2 minutes 10 5 minutes 40 25 Fig-13 Leakage Current vs. Time 0 20 60 Temperature() 85 Temperature Characteristics of Leakage Current Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 358 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 2-2 Frequency Characteristics of Impedance (Z) When a capacitor is applied with a voltage with the frequency changed, the impedance (Z), a factor of preventing the AC current changes as shown in (Fig. 14). This is the impedance-frequency characteristics of the capacitor. R 1 C ImpedanceESR () 0.01 ESR L 0.001 100 Fig-14 1k 10k 100k Frequency(Hz) 1M Factor of Impedance Frequency 100 10 Impedance () Z 0.1 1C The value 1/C shows the pure capacitive reactance graphically presented by a straight line going downward at an angle of 45, and L shows the pure inductive reactance graphically presented by a straight line going upward at 45. R shows the equivalent series resistance (ESR). At a range of lower frequencies, the R curve goes downward due to the dielectric loss frequency-dependence. At a range of higher frequencies, the R curve tends to be almost flat since resistance of electrolyte and paper separator is dominant and independent on frequency. Equation (3) shows this tendency. R2 L C 1 (Fig. 9) is a simplified model of an equivalent circuit of an aluminum electrolyte capacitor. (Fig. 14) shows dotted lines representing a breakdown of the impedance-frequency characteristic curve into components (C, R and L). As can be seen in this figure, the impedance-frequency characteristics are a composition of C, R and L frequency characteristics. Z L .......................................3 2 1 0.1 Aluminum Electrolytic Capacitors Film Capacitors Multilayer Ceramic Capacitors Because the impedance characteristics of an aluminum electrolyte capacitor depend on resistance of the electrolyte and paper separator, the Z value at the self-resonant frequency tends to be relatively higher, as shown by the solid line in (Fig. 15). The resistance of the electrolyte varies depending on temperature: as the temperature rises, the impedance decreases; and as the temperature decreases, the impedance increases, as shown in (Fig. 16). 0.01 100 1k 10k 100k 1M Frequency(Hz) Fig-15 Frequency Characteristics of each Capacitors Impedance Ex. 35V470F Radial Lead Type 10 ImpedanceESR () 1 Impedance ESR 40 0.1 20 105 0.01 100 Fig-16 1k 10k Frequency(Hz) 100k 1M Temperature and Frequency Characteristics of ImpedanceESR Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 359 CAT. No. E1001O Return Group Chart TECHNICAL NOTE Reliability For designing the device with aluminum electrolytic capacitors, a failure rate and useful life are necessary to be considered for their reliability. The failure rate of aluminum electrolytic capacitors is approximated by the bathtub curve shown in (Fig.17). a Aluminum electrolytic capacitors have two categories of failures: catastrophic failure and wear-out failure. <Catastrophic failure> This is a failure mode that completely destroys the function of the capacitor such as short circuit and open circuit failure. c <Wear-out failure> This is a failure mode where the electrical parameters of the capacitor gradually deteriorate and fail. The criteria for determining if this failure has occurred depend on the purpose of a device. For each series of capacitors, the following electrical parameters have been defined as criteria in the specifications of Endurance in the catalogs or product specifications: Change in capacitance Tan Leakage current Failure rates are often measured in units of % per 1000 hours (10-5/hour). For higher reliability devices designed with a smaller failure rate, units of Failure In Time (FIT) (10-9/hour) is used. Aluminum electrolytic capacitors are considered as components of wear-out failure mode, the electrical characteristics of which gradually deteriorate and their failure rate increases with time. In general, the failure rate in FIT is determined by total componenthours (product of the number of tested components and test hours). Due to the definition of FIT, the same FIT rate can be calculated in both cases of testing on the large number of tested components and also testing for long test periods of time. However, these cases mean differently for aluminum electrolytic capacitors. Using the failure rate is not suited to express the reliability of aluminum electrolytic capacitors, but the electrical characteristics based lifetime in hour should be considered to express the reliability. Also, there are MTBF (Mean Time Between Failures) and MTTF (Mean Time To Failure) to express reliability. The latter is applicable for aluminum electrolytic capacitors because they are categorized into a group of non-repairable systems, equipment and devices for which MTTF is applicable. Failure Rate b Time Fig-17 Bathtub curve Early failure period At the comparatively early periods of use, devices/components fail by deficiencies in design or manufacturing process or incompatibility with operation conditions. For aluminum electrolytic capacitors, these defectives are removed by debugging at one of manufacturing processes before shipments. b Random failure period Failure is stable low in occurrence and appears unrelated to their served term. Aluminum electrolytic capacitors are low in catastrophic failures in this period compared with semi-conductors and solid tantalum capacitors. c Wear-out failure period In this period, the failure rate increases with the served time. For aluminum electrolytic capacitors, since they were completed in manufacturing, the electrolyte impregnated has gradually evaporated and diffused out of the capacitors through the rubber seal materials with time, which leads to decrease in the capacitance and/or increase tan. When any of these values changes beyond the allowable range of specifications, the capacitors are defined as "fell into the wear-out failure". The served term until the capacitors fall into the wear-out failure period is called a useful life. a Failure Modes Failure modes depend on the application conditions that lead to fail. (Fig. 18). 1 Short Circuit 1 1 Open Circuit 1 tanESR Increase Open Vent Electrolyte Leakage 4 Dielectrical Break of Oxide Layer Dielectrical Break of Separator Disconnection of Terminal Construction Poor Terminal Connection Capacitance Drop Mismanaged Production Short Circuit Between Electrodes Less Electrolyte Leakage Current Increase Primary Factors Internal Causes 3 Local Deficiency in Oxide Layer Poor Connection Deterioration With Time 3 Deterioration of Oxide Layer Poor Sealing Burred Foil/ Metal Particle 2 Anode Foil Capacitance Drop Intemal Pressure Rise Unavoidable Factors in Normal Service Mechanical Stress 2 Electrolyte Vaporization Corrosion Mishandled Application Mechanical Stress 2 Cathode Foil Capacitance Drop 2 4 3 1 Electrochemical Reaction Failure Modes 3 Excessive Thermal Stress Excessive Operating Voltage Reverse Voltage Excessive Ripple Current Contamination By Chloride Excessive Charge-Discharge Duty Chloride Contamination By Assembly Board Cleaning Poor Sealing Fig-18 Failure Modes Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 360 CAT. No. E1001O Return Group Chart TECHNICAL NOTE Lifetime For lifetime estimation at a lower-temperature range, evaluation test data have not been obtained, and for evaluating long term endurance, it is necessary to take into account some additional factors such as deterioration of the rubber seal materials as well as the diffusion of electrolyte. Accordingly, in Equation (8), Tx should be 40C at the lowest for the lifetime calculation purpose, and also the estimated lifetime (Lx) should be 15 years at the longest. The lifetime of aluminum electrolytic capacitors is largely dependent on the application conditions. Environmental factors include temperature, humidity, atmospheric pressure and vibrations. Electrical factors include operating voltage, ripple current and chargedischarge. Where the capacitors are used in a normal filtering circuit, ambient temperature and heating due to the ripple current are crucial factors for determining the lifetime of the capacitors. These factors are included to the lifetime specifications titled "Endurance" on the catalogs or product specifications. For applications subject to high humidity and/or continuous vibrations, or subject to frequent charge and discharge operations, the endurance of individual conditions should be considered. 1,000,000 Law of 10 2 times Law of Arrhenius 100,000 5-1 Ambient Temperature Effect on Lifetime The lifetime of aluminum electrolytic capacitors is affected mainly by the loss of electrolyte as the result of diffusion through the rubber seal materials, which leads to a decrease in capacitance and increase in tan. The relationship of temperature to the diffusion of electrolyte follows the Arrhenius' Law (Equations (4) and (5)): kAe -E RT Life time (hours) 1,000 .....................4 RT ln A ln k 10,000 -E .........5 100 k Reaction rate constant AFrequency factor EActivation energy RGas constant (8.31J/deg) TAbsolute temperature (K) 10 2.3 2.6 2.7 2.8 2.9 3.0 3.1 3.2 x10 -3 Fig-19 Estimated result by Law of 10 2 times and Law of Arrhenius 5-2 E LoLx 2.303R Tx1 To1 ...............6 1 E log Lx Tx To1 log Lo ......7 2.303R Applying Voltage Effect on Lifetime Where a capacitor is used at lower than the rated voltage, the lifetime may not be adversely affected, which means that the effect of the applying voltage is negligibly small, while the effect of the ambient temperature and heat generation due to ripple current is significant. log Practical estimation of the lifetime has been using Equation (8) as an approximation: Fig-20 0 Capacitance Change Lx LoBt 2.5 1TK -1 Applying Equation (5) to the lifetime of the capacitors brings Equation (6), which is converted to Equation (7): (To-Tx)/10 2.4 ...............8 LoSpecified lifetime (hour) with the rated voltage applied (or the rated ripple current superimposed to a DC voltage) at the upper limit of the category temperature. Refer to the lifetime specifications of individual products. 10 100V 80V 65V 50V 35V 20 30 40 10 tan LxEstimated life on actual usage (hour) ToMaximum Category Temperature TxActual Ambient Temperature Bt Temperature acceleration factor 100V 80V 65V 50V 35V 1 0.1 0.01 0 100 200 500 1,000 Test Hours Where, the temperature acceleration factor (BT) is approximately 2 over an ambient temperature range from 60C to 95C, which means that the lifetime is approximately halved for every 10C rise in ambient temperature. However, according to the Arrhenius Equation (6), the reciprocal of T is directly proportional to the logarithm of lifetime, which means that, strictly speaking, there is the temperature range where the theory of lifetime reducing by half at every 10C rise is not applied. (Fig. 19). 2,000 5,000 10,000 hours Fig-20 Endurance (measured by each apply voltage, result curves are overlapped) Note: Due to the very small effect of the applying voltages, the plots cannot be distinguished from one another. However, for capacitors of larger size and higher rated voltage contain a larger volume of electrolyte, difference in applying voltages can affect degradation of the oxide layer, other than the diffusion of electrolyte. Therefore, for screw mount terminal type capacitors with the rated voltage of 350Vdc or higher, the lifetime estimation includes the effect of applying a lower voltage than the rated voltage (derating voltage). Especially for capacitors whose maximum operating temperature is a 105C or higher, the temperature acceleration factor (BT) needs to be modified depending on temperature ranges of the lifetime estimation. For details, please consult us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 361 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 5-3 Ripple Current Effect on Lifetime Since an aluminum electrolytic capacitor has a larger tan than other types of capacitors, the capacitor produces more internal heat when a ripple current flows through it. The temperature rise due to this heat may significantly affect the lifetime of the capacitor. This is the reason why ripple current ratings are specified for capacitors. 5-3-1 Heat Generation due to Ripple Current Power consumption by the ripple current can be expressed as follows: W IR2R VIL ................................................9 WInternal power dissipation IR Ripple Current R Internal Resistance (Equivalent Series Resistance) V Applied voltage IL Leakage Current Leakage current IL at the maximum operating temperature can be 5 to 10 times higher than the valuesmeasured at 20C. However, considering IR >> IL, the above equation can be simplified as Equation (10). W IR2R ......................................................10 To obtain the temperature at which equilibrium is achieved between heat generation and dissipation, derive Equation (11). IR2R AT ................................................11 Radiation Constant A Surface area of can casem2 TTemperature-rise due to the Ripple Current A DD 4L 4 DCan Diameter (m) LCan Length (m) From the above equation, the internal temperature rise (T) is given by Equation (12): IR2R ................................................... 12 T A Also, for a ripple frequency of 120Hz, Equation (12) for calculating T is rewritten as Equation (13): IR2R IR2tan .......................................... 13 A AC tan Where R C tan Dissipation Factor at 120Hz 2ff = 120Hz C Capacitance at 120Hz F An approximate value of ripple current-caused T can be calculated using Equation (14): T Ix/Io 2 xTo ....................................... (14) T Io Rated ripple current (Arms), frequency compensated, at the upper limit of the category temperature range Ix Operating ripple current (Arms) actually flowing in the capacitor ToRise in internal temperature due to the rated ripple current (): different for each product series. Please consult us. There are some product families that can accept a higher ripple current than the rated value providing that ambient temperature Tx is lower than the upper limit of the category temperature range. However, in this case, remember that the lifetime decreases due to the higher T due to the ripple current. Be sure that T does not exceed the specified limit that has been determined as a function of ambient temperature. Note that the core temperature limit of the element is shown by [Tx + T limit]. Examples of T limits at some ambient temperatures are shown below. Ambient Temp Tx 85 less or equal Limit value of T 15 105 5 Given a frequency compensation factor (Frequency Multiplier) = Ffn and reference frequency for the ripple current = fo, Rfn Rfo/Ffn2 is obtained. Therefore, the ripple current at any frequency can be converted into its r.m.s. value at the reference frequency (Ifo) using Equation (16): Ifo= (If1/Ff1)2+(If2/Ff2)2+......(Ifn/Ffn)2 ...........................16 Ifo Reference ripple current (Arms), i.e., that at the reference frequency Ff1Ff2...FfnFrequency compensation factor (Frequency Multiplier) at frequency f1***fn (Refer to the catalogs) Note that the ESR depends on the temperature and the value of depends on the installation conditions of the capacitor on the board. To determine more accurate values of T, they can be actually measured using a thermocouple. 5-3-3 Lifetime Estimation Equations (17) through (19) can be used for estimating the lifetime of a non-solid aluminum electrolytic capacitor based on the ambient temperature, the rise of internal temperature due to ripple current, and operating voltage applied. For a capacitor whose Endurance specifications are defined by only "the DC rated voltage". To-Tx 10 Lx=Lox2 x2 -T 5 ....................................17 For a capacitor whose Endurance specifications are defined by "the rated ripple current with a DC voltage superimposed". To-Tx 10 Lx=Lrx2 To -T 5 x2 .................................18 For a screw terminal type capacitor with the rated voltage of 350Vdc or higher Lx=Lrx2 To+5-Tx-25 10 x2 25-T A xKv ...........................19 Specified lifetime (hour) at the upper limit of the category temperature range and at the rated voltage Lr Specified lifetime (hour) at the upper limit of the category temperature range and at the rated ripple current superimposed to a DC voltage Lx Estimation of actual lifetime (hour) To Upper limit of the category temperature range () Tx Actual ambient temperature of the capacitor () Use 40 if the actual ambient temperature is below it. T Rise of internal temperature due to actual ripple current *To Rise of internal temperature due to the rated ripple current *A This factor depends on the ripple frequency and internal temperature rise. Kv Derating voltage factor For the values marked with * , consult us. Please consult us about lifetime equations for the series of the category temperature 125 or more. Subject series : MVH, MHL, MHB, MHJ, MHK, GPA, GVA, GXE, GXL, GPD, GVD, GXH. Lo Note that the calculation results above are not considered as a guaranteed value. When designing the lifetime of a device, please select a capacitor that has an extra margin against the device lifetime requirements. Also, where the estimation result calculated exceeds 15 years, please consider 15 years to be a maximum. If 15 years or more may be required as an expected lifetime, please consult us. Each product family has a different T limit. For details, consult us. 5-3-2 (ESR) of a capacitor is frequency-dependent, the allowable ripple current depends on the frequency. Where the operating ripple current consists of a mains power frequency element and switching frequency element(s) like switching mode power supplies do, the internal power loss is expressed by Equation (15): W If12 Rf1 If22 Rf2 ......Ifn2 Rfn ........................15 WPower consumption If1If2...IfnRipple current (Arms) at frequency f1***fn Rf1Rf2...RfnESR () at f1***fn Ripple Current and Frequency The ripple current rating is specified normally by the effective value (r.m.s value) of 120Hz or 100kHz sine wave. However, since the equivalent series resistance Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 362 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 5-4 Charge and Discharge Operation Effect on Lifetime Applying a voltage to an aluminum electrolytic capacitor makes the electric charges accumulate on the anode foil dielectric. Discharging the electricity through a discharging resistance makes the electric charges move to the cathode foil and cause chemical reactions between the cathode aluminum and electrolyte, thereby forming a dielectric oxide layer. 56WV10,000F35x60 Capacitance Change(%) Measurement:20, 120Hz 0 Special 10 20 (Vent Operated) 30 Test Conditions Products Applied Voltage: Rated Voltage Ambient Temp: 60 : 0.01sec Cycle: Charge 30 sec, Discharge 30 sec General Products 40 When this charge and discharge is repeatedly operated, the chemical reactions proceed to further form the oxide layer on the cathode foil, causing the capacitance of the cathode foil to reduce and thereby reducing the capacitance of the capacitor. Moreover, the chemical reactions bring heat and gases. Depending on the charge and discharge conditions, the internal pressure may increase, the pressure relief vent may open or the capacitor may have destructive failures. Consult us for using a capacitor with the following applications: 50 Capacitance Change(%) Measurement:20, 120Hz 0 10 20 30 40 Test Conditions : 0.01sec Ambient Temp: 60 harge and Discharge: 10,000 times Cycle: Charge 30 sec, Discharge 30 sec 0.7WV 0.8WV (Vent Operated) General Products 0.9WV Fig-24 Rapid charge and discharge characteristics (Effects of Applied Voltage) 56WV10,000F35x60 Q CA V1 Special Products 0 Capacitance Change(%) CACapacitance of Anode Foil CCCapacitance of Cathode Foil V1 Voltage of Power Supply V2 Applied Voltage to Cathode Foil Fig-21 Charge Condition at Charge Applied Voltage: Rated Voltage Applied Voltage: Rated Voltage : 0.01sec Charge and Discharge: 10,000 times Cycle: Charge 30 sec, Discharge 30 sec 10 20 30 50 (Vent Operated) 20 40 60 70 (Vent Operated) General Products 80 Fig-25 Rapid charge and discharge characteristics (Effects of Ambient Temperature) Charge Transfer Anode Foil WV Applied Voltage/Rated Voltage Ratio 40 V2 8 56WV10,000F35x60 V1 Cathode Foil CC 1 2 4 6 Charge and Discharge Cycle (ten thousand cycle) Fig-23 Rapid charge and discharge characteristics (Effects of Frequency) Frequently repeating power on/off. Repeating rapid charge and discharge operations at a short interval cycle. Repeating charge and discharge operations with a large voltage drop. Anode Foil CA 0 V2 Cathode Foil 5-5 Inrush Current For the power supply inrush current that can occur on the start-up of a power supply or on the charge of a welding machine lasts only milliseconds, but its magnitude may reach 10 to 1,000 times more than the normal current. Usually, a single, non-repeated inrush current produces a negligibly small amount of heat, so it does not matter. However, frequently repeating inrush currents may heat up the element inside a capacitor more than the allowable limit and/or overheat the external terminal connections or the connections between the internal lead and foil electrode. Fig-22 Charge Condition at Discharge (Disconnect V1 and Discharged condition) QCAV2CCV2 then CAV1CAV2CCV2 CAV1 V2 ................................................20 CACC Figures 23 through 25 show some test data of special-design capacitors for charge and discharge application, compared with general-purpose capacitors. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 363 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 5-6 Abnormal Voltage Effect on Lifetime 5-6-2 Applying abnormal voltage can increase the internal pressure with heat and gases produced, causing the pressure relief vent to open or the capacitor to have destructive failures. 5-6-1 Reverse Voltage Applying a reverse voltage will cause chemical reactions (formation of dielectric) to occur on the cathode foil, and, as is the case with overvoltage, the leakage current will rapidly increase with heat and gases generating and thus the internal pressure increases. The reactions are accelerated by the voltage, current density and ambient temperature. It may also accompany a reduction in capacitance and an increase in tan as well as an increase in the leakage current. An example of capacitor reverse-voltage characteristics is shown in Fig. 27. A reverse voltage of as small as 1V can cause the capacitance to decrease. A reverse voltage of 2 to 3V can shorten lifetime due to a reduction in capacitance, increase in tan, and/or increase in leakage current. A reverse voltage of even higher value can open the pressure relief vent or lead to destructive failures (Fig. 27). Overvoltage Applying a voltage higher than the rated voltage will cause chemical reactions (formation of dielectric) to occur on the anode foil with the leakage current rapidly increasing, which produces heat and gases and thereby increases the internal pressure. The reactions are accelerated by the voltage, current density and ambient temperature, causing the pressure relief vent to open or the capacitor to have destructive failures. It may also accompany a reduction in capacitance and an increase in tan as well as an increase in the leakage current, which can lead to internal short-circuiting failure. An example of capacitor overvoltage characteristics is shown in Fig. 26. Ex. Radial Lead Type 25V47F Ex. Radial Lead Type 35V560F 10 WV WVx1.07 WVx1.14 0 Capacitance Change(%) Capacitance Change(%) 10 -10 -20 -30 WV -1V -3V 0 -10 -20 -30 -40 -40 1 1 0.1 tan tan WV WVx1.07 WVx1.14 1000 1000 WV WVx1.07 WVx1.14 100 Leakage Current(A) Leakage Current(A) WV -1V -3V 0.01 0.01 10 1 0.1 0 1000 2000 3000 4000 100 10 1 5000 Time(hours) WV -1V -3V 0 250 500 750 1000 Time(hours) Fig-26 Applied overvoltage characteristic at 105 Fig-27 Applied Reverse voltage characteristic at 105 5-6-3 Do not Use Aluminum Electrolytic Capacitors in an AC Circuit Using an aluminum electrolytic capacitor in an AC circuit will result in the same situation as that with a positive potential being applied to the cathode (like a reverse voltage) and with an excessively large ripple current flowing in the capacitor, which may increase the internal pressure due to the generation of heat and gases, open the pressure relief vent, leak the electrolyte with the rubber seal bung expelled or cause the capacitor to blow up or catch fire in the worst case. If the capacitor blows up, it may scatter flammable materials such as electrolyte and element-supporting wax materials, which can lead to short-circuiting of the device. Therefore, do not use aluminum electrolytic capacitors in any of the AC circuits. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 364 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 6. Effect of Halogens [Precautions] a. Make sure that the markings on a capacitor are not rubbed against any other component or the PC board during cleaning. Note that shower cleaning can cause the markings on the capacitor to be washed off. b. Depending on the cleaning method, the markings may be erased or blur. c. A drying process following a water cleaning or rinsing process may cause the outer sleeve materials of a capacitor to swell or shrink. d. After using a weak-alkaline cleaning agent (e.g. Clean Through 750H), rinse with water to make sure that no alkaline residue is left on the capacitor. e. Control a flux concentration in a cleaning agent within 2 wt%. f. IPS (Isopropyl Alcohol), if containing xylene or other solvent to improve its cleanability, may swell the rubber seal materials. g. Depending on the type of cleaning agent or conditions, note that the outer sleeve of a capacitor may lose a gloss or whiten in appearance. Aluminum electrolytic capacitors are sensitive to contamination of halogen ions (especially to chlorine and bromine ions) though the degree of the effect depends on the properties of the electrolyte and/or sealing materials used in the capacitors. For using a halide-containing flux, solvent (cleaning agent, adhesive or coating materials) or fumigant, the halide may penetrate into the capacitor through the rubber seal materials and cause the following corrosion reactions to occur. These reactions can lead to an increase in leakage current, opening of the pressure relief vent, and/or open-circuit failure in the capacitor. The reactions are accelerated as the voltage and/or temperature rises. [Corrosion reactions] a) Decomposition of halides + RX + H2O ROH + H + X ................................. (21) b) Corrosion reactions + AI2O3 + 6H + 6X 2AIX3 + 3H2O ........................ (22) AI + 3X AIX3 + 3e .......................................... (23) + - 2AIX3 + 6H2O 2AI(OH)3 + 6H + 6X ..................... (24) RXHalogenated compound X-Halogen ionsCl , F , Br Halides that penetrated the element inside a capacitor make contact with the electrolyte, by which the halides are hydrolyzed and release halogen ions as shown on Reaction (21). The halogen ions then attack aluminum by anodic half-cell reaction, producing AlX3 (Reaction 22 and 23). AlX 3 is then hydrolyzed, which is decomposed to aluminum hydroxide and the halogen ions (Reaction (24). The halogen ions reproduced are repeatedly used and reproduced by the reactions of (22) (24), and then the corrosion develops endlessly. Shown below are precautions for use of flux, cleaning agents, adhesive, coating materials and fumigant. 6-2-2 HCFC (Freon-225), as Alternative CFCs AK225AES (Asahi Glass) [Cleaning conditions] Solvent resistant type capacitors, which were originally developed to intend to resist Freon TE or Freon TES, are also capable of withstanding either of immersion or ultrasonic cleaning, for a maximum of 5 minutes (or 2 minutes for KRE and KRE-BP series capacitors or 3 minutes for SRM series). However, in view of global environmental issues, HCFCs has not been recommended. [Compatible capacitor products] Terminal Shape Subject Series 6-1 Effect of Flux Usually flux products contain an activator of ionic halide system, which has been associated with the corrosion issues of capacitors, and nowadays non-ionic halide system type flux products have been increasingly available on the market. Some of the latter flux type have been classified into the so called "non-halogen flux" or "halogen-free flux" , and parts of the "non-halogen" or "halogen-free" flux products may contain a large amount of non-ionic halides, which can also adversely affect the capacitors. Flux types whose halogen ion concentrations are so low that the capacitor may not be adversely affected include: AHQ3100K (Asahi) POZ6 (Senjyu) 6-3 Adhesive and Coating Material To use adhesives and/or coating materials for aluminum electrolytic capacitors, make sure of the following conditions: a. Do not use any of adhesive or coating materials containing halogenated solvents. b. No flux residue nor stain is left between the rubber seal of a capacitor and PC board. c. Dry the capacitor to remove residual cleaning agents before applying adhesive and coating materials. Do not cover up the entire surface of the rubber seal of the capacitor with adhesive and coating materials. d. Improper heating and/or curing conditions for adhesives and coating materials may cause the sleeve to swell or shrink. Please consult us for proper conditions. Subject Series Surface Mount Type All Series All Series All Series (Less and equal 100Vdc) SRM, KRE, KMA, SRG, KRG, KMQ(100Vdc),SMG(250Vdc), KMG(250Vdc), SME-BP, KME-BP, LZA, LXZ, LXY, LXV, LE, FL, GPA, GVA, GXE(50Vdc), GXL, GPD, GVD, GXH, LBK, LBG, LLA 6-2-3 Other Solvents Fatty-alcohol cleaning agents (New type of solvent) Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750H, 750K, 750L, and 710M (Kao) Technocare FRW-14 through 17 (GE Toshiba Silicones) IPA (Isopropyl alcohol) [Compatible capacitor products] Snap-in Type Radial Lead Type To avoid capacitor failures, do not use the following cleaning agents: Halogenated system: causes capacitor failures due to corrosion. Alkali system: corrodes (dissolves) the aluminum can case. Terpene and petroleum system: deteriorates the rubber seal materials. Xylene: deteriorates the rubber seal materials as well. Acetone: erases the markings printed on a capacitor. 6-2-1 Alcohol Cleaning Agents Radial Lead Type MVA(63Vdc), MVE(63Vdc), MZR, MZJ, MZA, MVY(6.3 63Vdc), MZF, MZE ,MZK, MLA, MLF, MLE, MLK, MVL, MVJ, MVH(50Vdc), MHL, MHB, MHJ, MHK, MV-BP, MVK-BP When a capacitor is mounted closely flush on the PC board, a residual cleaning agent may be left in the gap between the body of the capacitor and PC board surface. Dry out the residue with a forced hot air of 50 to 85C for 10 minutes or more. 6-2 Cleaning Agents Terminal Shape Surface Mount Type [Cleaning conditions] Either of Immersion or ultrasonic cleaning, for a maximum of 10 minutes at a maximum liquid temperature of 60C. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 365 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 6-4 Effect of Fumigation e. For a non-solid aluminum electrolytic capacitor, covering up the entire surface of the rubber seal with resin mold materials will obstruct the normal diffusion of internal hydrogen gas from the capacitor and result in serious failures. Also, where the adhesive and coating materials contain a large amount of halogen ions, the halogen ions will contaminate the inside of the capacitor through the rubber seal materials, which cause the capacitor to become a failure. f. The outer sleeve of a capacitor may lose a gloss or whiten in appearance depending on solvent materials that the adhesive or coating materials contains. g. Some adhesives or coating materials contain organic solvent such as Xylene. Xylene can deteriorate the rubber seal materials, which cause the flux ingredients to penetrate into the capacitor. In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. Where aluminum electrolytic capacitors exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with the halogen ions. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth that the fumigation is not required to. For customers to export or import electronic devices, semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 7. Recovery Voltage Where a capacitor is once charged and discharged with both of the terminals short-circuiting and then left the terminals open for a while, a voltage across the capacitor spontaneously increases again. This is called "recovery voltage phenomenon". The mechanism for this phenomenon can be interpreted as follows: When charged with a voltage, the dielectric produces some electrical changes within, and then the inside of the dielectric is electrified with the opposite polarities (dielectric polarization). The dielectric polarization occurs in both ways of proceeding rapidly and slowly. When a charged capacitor was discharged until the voltage across the capacitor disappears, and then being left the terminals open, the slow polarization will discharge within the capacitor and appear as recovery voltage. (Fig. 28). Fig-28 Model of Recovery Voltage Applied Voltage The Fast Polarization Discharge After discharge, the electrode potential is 0V level. The Slow Polarization OpenCircuits Un-polarization potential at applied voltage, polarization will be happen gradually. The recovery voltage changes with time as sown in Fig. 29. Its peak will appear 10 to 20 days after the terminals are opened, with gradual weakening thereafter. Larger sized capacitors (screw terminal type and snap-in type) may produce larger recovery voltage. With a recovery voltage residing in a capacitor, carelessly short-circuiting the terminals can cause sparks to occur, which may scare workers and/or damage low-voltage operating components such as CPU's and memories in the device circuit. To avoid this trouble, discharge the capacitor through 100 - 1k resistors before use. Also, Nippon Chemi-Con may provide some solutions with some packaging method for it. Please consult us. Depolarization Residual Polarization 10 Recovery Voltage (V) 9 8 7 6 5 4 3 2 Ex. 200V680F(30x50L) 1 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Time (day) Fig-29 Change of Recovery Voltage Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 366 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 8. Storage 50WV 100F12.5x20 10 Capacitance Change (%) Some characteristics of an aluminum electrolytic capacitor are temperature-dependent. The higher the temperature is, the more deteriorated the capacitor will be. An increase in temperature accelerates the increase in leakage current and tan and the decrease in capacitance. Leaving a capacitor exposed to high humidity for long hours may lead to discoloration of the lead wires and terminals, and poor solderability. To store aluminum electrolytic capacitors, keep them at normal temperature and humidity without exposure to direct sunlight. 0 40 10 70 20 30 40 tan Leakage Current 1 70 100 tan 70 40 10 0.1 Leakage Current (A) Leaving them exposed to high temperatures (higher than the normal ambient temperature) may lead to chemical reactions between the anode oxide layer and electrolyte, which drop the withstanding voltage and increase leakage current. If this is the case, applying the rated voltage to the capacitor will lead to dielectric breakdown due to the heat produced with the large leakage current, which finally causes the pressure relief vent to open. 40 Capacitors that have been stored for long periods of time should be subjected to a voltage treatment process (see Note 1) which will reform the dielectric (AI2 O 3 ) by electrolyte and return the leakage current to the initial level. Leakage current increase during storage will vary with the withstanding voltage of a capacitor. In general, the higher the rated voltage, the larger increased the leakage current tends to be. Also, since storing for long period of time may shorten the lifetime of the capacitors, consider storage conditions according to the requirements of device life expectancy. 0.01 0 1 2 1 Time (year) Fig-30 Temperature Characteristics of Storage (Note 1) In the voltage treatment process, connecting resistor (around 1k) in series with the capacitor, applied the rated voltage and then be kept the rated voltage for 30 to 60 minutes. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 367 CAT. No. E1001O Return Group Chart TECHNICAL NOTE 9. Tips for Selecting Capacitors Appropriate for Individual Applications Aluminum electrolytic capacitors are used mainly for the filtering application of power supplies. Select appropriate capacitors for the specific requirements of each application, referring to the following examples for typical applications: For the filtering circuit for 400Vac line, two capacitors of each a rated voltage 350 to 400Vdc can be used with being connected in series. In the series connection, voltages across the individual capacitors during charging depend on their individual capacitance values. After completion of the charging, the voltages come to depend on their leakage current values as the voltage distribution to the individual capacitors inversely corresponds to their leakage current values. For the voltage not to exceed the rated value after the charging is completed, balancing resistors should be connected in parallel with each capacitor. For guidance on choosing balancing resistors, please consult us. Where capacitors connected in series are frequently charged and discharged, individual charging voltages depend on the variations in their capacitance values. Therefore, keeping the voltage balance will be difficult even if balancing resistors are employed. For servo amplifiers and other application where the voltage fluctuates frequently due to regeneration, use capacitor families that have been especially designed for intensive charge and discharge operations, or consult us for individual designs. 9-1 Input Filtering Capacitors for Switching Mode Power Supplies An input filtering capacitor functions to smooth 50-120 Hz waveforms that come from a rectifying circuit, the waveforms of which are superimposed with the ripples with the switching frequency from the switching stage where the capacitor supplies the electric power. Therefore, the capacitor must be capable of managing both ripple currents with each frequency. The ESR of a capacitor is frequency-dependent, so that a ripple current of different frequency produces a different thermal energy in the capacitor. For PFC power supplies or lighting ballasts, capacitors are subjected to ripple current whose frequency is several dozens of kHz to 100kHz. Therefore, to select capacitors, take their impedance characteristics into consideration. Recommended capacitors for inverter main circuits 85 105 Characteristics Type Standard Longer Life Standard Longer Life Snap-in SMQ SMM KMQ LXS,LXM Screw Mount RWE KMH LXA,LXR RWF,RWG,RWH Recommended input filtering capacitors for SMPS 85 Characteristics Type Standard Longer Life Standard Radial Lead KMQ Snap-in SMQ SMM KMQ 105 Compact Longer Life PAG KXJ KMS,KMR LXS,LXM Recommended capacitors for servo amplifiers 85 Characteristics Type Standard Snap-in Screw Mount RWV 9-2 Output Filtering Capacitors for Switching Mode Power Supplies In the output filtering, a capacitor must be capable of managing a ripple current with the frequency as high as around 100 kHz. Therefore, Nippon Chemi-Con provides excellent product lineups with low impedance characteristic at high frequencies, including high temperature and long-life versions, which can be chosen according to the application purpose. The 125C maximum temperature series capacitors have a shorter lifetime than the "Long Life" series of 105C max. temperature though the electrical characteristics are highly stable. The "wide temperature range" series has two subseries that differ by the applicable temperature range: -55 to 105C and -40 to 125C . The "Long Life" series capacitors have been designed for specializing lower impedance and also longer lifetime. Compared to the "wide temperature range" series, the Long Life series can serve longer with the lower impedance, though the maximum operating temperature is limited to 105C and the electrical characteristics are large in change over the temperature range. 105 High Temp KMV 9-4 Capacitors for Control Circuits These capacitors are relatively small in capacitance, and therefore the case size is also small. However, the smaller the case size, the shorter the lifetime of a capacitor. Moreover, if a capacitor is located near a heat source, the capacitor' s lifetime may be shortened. Consider selecting an adequate capacitor in lifetime balancing with other capacitors. Recommended capacitors for control circuits Characteristics Type Radial Lead 105 5L7L 11L FL KY,KYB,LE 9-5 Photoflash Capacitors Recommended output filtering capacitors for SMPS These capacitors are specially designed so that much higher energy-volumetric efficiency can be obtained. Therefore, these capacitors are limited in application. Note that they cannot substitute filtering capacitors. Detailed specifications of these capacitors should be determined specifically for each photoflash application through discussions with a customer. 105 125 Type Standard Low Z High Temp Wide Temp Range LXY LXZ GXE Longer Life KY KZM,KZN Characteristics 9-3 Filtering Capacitors for Inverter Main Circuits These capacitors are used in a similar way to those for the input of the switching mode power supplies. Additionally, please understand the following precautions: Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 368 CAT. No. E1001O Return Group Chart Reliability Test Data 369 Return Group Chart RELIABILITY TEST DATA MVL Ser MVHSer ies ies Endurance 125 MVL 6.3V 22F D60 MVL 50V 4.7F E60 MVL 16V 47F E60 10 0 -10 -20 -30 10 0 -10 -20 -30 -40 -40 Dissipation Factor (tan) Dissipation Factor (tan) 1 0.1 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500 (A) Leakage Current (A) Leakage Current (A) 500 0.1 0.01 1 0 1 0.01 0.1 0.01 0.001 Endurance MVH 10V 220F HA0 MVH 35V 47F HA0 MVH 50V 33F HA0 Capacitance Change (%) Capacitance Change (%) 105 Surface Mount 0 500 1,000 1,500 2,000 2,500 3,000 10 1 0.1 0.01 3,500 Time (hours) Time (hours) MVYSer ies Impedance/ESR vs Frequency MVY 16V 10F D55 1,000 IMPEDANCE ESR IMPEDANCE ESR -55 -40 -25 +20 +105 Impedance*ESR () Impedance*ESR () -55 -40 -25 +20 +105 10 100 10 1 0.1 1 0.1 MVY 16V 330F HA0 100 0.01 10 100 1k Frequency (Hz) 10k 100k 10 100 1k Frequency (Hz) 10k 100k Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 370 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA Low Impedance Radial KZESer ies 105 Endurance with Rated Ripple Current 105 Shelf Life KZE 10V 220F6.3x11L KZE 16V 680F10x16L KZE 50V 470F12.5x20L Capacitance Change (%) Capacitance Change (%) KZE 10V 220F6.3x11L KZE 16V 680F10x16L KZE 50V 470F12.5x20L 10 0 -10 -20 -30 1 0.1 -10 -20 -30 1 0.1 0.01 Leakage Current (A) Leakage Current (A) 0.01 10 1 0.1 0 -40 Dissipation Factor (tan) Dissipation Factor (tan) -40 10 0 1,000 2,000 3,000 4,000 5,000 10 1 0.1 6,000 0 500 Time (hours) Impedance-Frequency 10 1,000 Time (hours) Characteristics KZE 10V 220F6.3x11L KZE 16V 680F10x16L KZE 50V 470F12.5x20L at 20 Impedance () 1 0.1 0.01 100 1k 10k 100k Frequency (Hz) 1M 10M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 371 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA LXZSer LXYSer ies ies with Rated Ripple Current 105 Endurance LXZ 6.3V 470F6.3x15L LXZ 10V 1000F8x20L LXZ 10V 3300F12.5x25L 10 Capacitance Change (%) Capacitance Change (%) 105 Endurance Low Impedance Radial 0 -10 -20 -30 Dissipation Factor (tan) 0.1 10 0 -10 -20 -30 0.1 0.01 0.01 100 100 10 1 0.1 LXY 16V 56F5x11.5L LXY 25V 470F10x20L LXY 35V 1000F16x20L 1 Leakage Current (A) Leakage Current (A) Dissipation Factor (tan) 1 0 10 1 0.1 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 Time (hours) Time (hours) Impedance-Frequency Characteristics Impedance-Frequency at 20 100 at 20 LXY 16V 56F5x11.5L LXY 25V 470F10x20L LXY 35V 1000F16x20L 10 10 Impedance () Impedance () Characteristics 100 LXZ 6.3V 470F6.3x15L LXZ 10V 1000F8x20L LXZ 10V 3300F12.5x25L 1 0.1 0.01 with Rated Ripple Current 1 0.1 100 1k 10k Frequency (Hz) 100k 0.01 100 1M 1k 10k Frequency (Hz) 100k 1M Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 372 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA Low Impedance Radial LXVSer LXV 10V 820F5x11.5L LXV 25V 220F8x15L LXV 35V 560F12.5x20L ies 105 Endurance with Rated Ripple Current 105 Shelf 20 10 0 -10 -20 20 10 0 -10 -20 -30 1 Dissipation Factor (tan) Dissipation Factor (tan) -30 1 0.1 0.1 0.01 100 Leakage Current (A) 0.01 100 Leakage Current (A) 30 Capacitance Change (%) Capacitance Change (%) 30 Life 10 1 10 1 0.1 0.1 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 Dissipation Factor (tan) Characteristics Impedance-Frequency Characteristics at 20 100 30 20 10 0 10 -10 Impedance () Capacitance Change (%) Temperature 3,000 Time (hours) Time (hours) -20 -30 1 0.1 1 0.01 0.1 0.01 -55 -40 -25 20 60 120 1k 10k 100k Frequency (Hz) 1M 85 105 Temperature () Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 373 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA GXE 125 Radial Series Impedance-Frequency Endurance with Rated Ripple Current Capacitance Change (%) GXE 35V 100F 8x12L GXE 50V 100F 10x12.5L GXE 10V 3300F 16x25L GXE 35V 100F 8x12L GXE 50V 100F 10x12.5L GXE 10V 3300F 16x25L at 20 10,000 10 0 10 1,000 20 30 100 Impedance () 40 Dissipation Factor (tan) Characteristics 1 0.1 10 1 Leakage Current (A) 0.01 0.1 1,000 100 0.01 100 10 1 0 1,000 2,000 3,000 4,000 1k 10k Frequency (Hz) 100k 1M 5,000 Time (hours) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 374 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA Snap-ins SMM KMM Series 85 Series 105 Endurance with Rated Ripple Current Endurance with Rated Ripple Current KMM 200V 470 F Q30 KMM 400V 220 F Q40 Capacitance Change (%) Capacitance Change (%) SMM 200V 470F P30 SMM 400V 150F R25 10 0 -10 -20 -30 1 0.1 -20 -30 1 0.1 0.01 Leakage Current (A) Leakage Current (A) 0.01 1,000 100 10 1 0 -10 -40 Dissipation Factor (tan) Dissipation Factor (tan) -40 10 0 1,000 2,000 3,000 1,000 100 10 1 4,000 0 1,000 Time (hours) 20 Dissipation Factor (tan) Capacitance Change (%) Dissipation Factor (tan) Capacitance Change (%) 105 LXG 10V 1,500F P40 LXG 50V 5,600F Q50 10 0 -10 -20 -30 1 0.1 0.01 Endurance with Rated Ripple Current LXH 200V 1,000 F R45 LXH 400V 330 F R45 20 10 0 -10 -20 -30 1 0.1 0.01 1,000 Leakage Current (A) 1,000 Leakage Current (A) 4,000 Series Endurance with Rated Ripple Current 100 10 1 3,000 LXH LXGSeries 105 2,000 Time (hours) 0 2,000 4,000 6,000 100 10 1 8,000 0 2,000 4,000 6,000 8,000 Time (hours) Time (hours) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 375 CAT. No. E1001O Return Group Chart RELIABILITY TEST DATA RWE/RWF/RWL Screw-Mount Series RWE/RWF series 85 Endurance with Rated Ripple Current RWE 550V 560F C96 10 RWF 450V 10000F FH0 0 10 20 30 1 0.1 0.01 10,000 Leakage Current (A) Dissipation Factor (tan) Capacitance Change (%) 20 1,000 100 10 0 1,000 3,000 4,000 5,000 6,000 7,000 Time (hours) RWL series Endurance with Rated Ripple Current Leakage Current (A) Dissipation Factor (tan) Capacitance Change (%) 85 2,000 RWL 400V 3300F DD0 10 0 10 20 30 40 1 0.1 0.01 1,000 100 10 1 0 2,000 5,000 15,000 10,000 20,000 25,000 Time (hours) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 376 CAT. No. E1001O Return Group Chart Appendix 377 Return Group Chart PART NUMBERING SYSTEM Appendix (Part number) Capacitance code * How to use the table For less than 10F, a decimal point position is displayed with R. For 10F or more, capacitance code is set to the first 2 digits and index (1digit). Treatment of fraction (Refer to the table) 1st 2nd Cap. Value Capacitance value part 2nd 0 A 1 B 2 C 3 D 4 E 5 F 6 G 7 H 8 J 9 K 1 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 2 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 27.5 28.0 28.5 29.0 29.5 3 30.0 30.5 31.0 31.5 32.0 32.5 33.0 33.5 34.0 34.5 35.0 35.5 36.0 36.5 37.0 37.5 38.0 38.5 39.0 39.5 4 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 44.5 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 49.5 Example of conversion 1st 5 50.0 50.5 51.0 51.5 52.0 52.5 53.0 53.5 54.0 54.5 55.0 55.5 56.0 56.5 57.0 57.5 58.0 58.5 59.0 59.5 6 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.5 65.0 65.5 66.0 66.5 67.0 67.5 68.0 68.5 69.0 69.5 7 70.0 70.5 71.0 71.5 72.0 72.5 73.0 73.5 74.0 74.5 75.0 75.5 76.0 76.5 77.0 77.5 78.0 78.5 79.0 79.5 8 80.0 80.5 81.0 81.5 82.0 82.5 83.0 83.5 84.0 84.5 85.0 85.5 86.0 86.5 87.0 87.5 88.0 88.5 89.0 89.5 Real cap. 9 90.0 90.5 91.0 91.5 92.0 92.5 93.0 93.5 94.0 94.5 95.0 95.5 96.0 96.5 97.0 97.5 98.0 98.5 99.0 99.5 10.0F 10.1F 10.2F 10.3F 10.4F 10.5F 10.6F 10.7F 10.8F 10.9F 11.0F 132F 133F 167F 168F 1110F 1340F 13200F 13600F 270000F The first 2 digits 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 13.2 13.3 16.7 16.8 11.1 13.4 13.2 13.6 27.0 Code Treatment of fraction 11th 12th 13th 10.0 1 0 0 10.0 1 0 0 10.0 1 0 0 10.5 1 A 0 10.5 1 A 0 10.5 1 A 0 10.5 1 A 0 10.5 1 A 0 11.0 1 1 0 11.0 1 1 0 11.0 1 1 0 13.0 1 3 1 13.5 1 D 1 16.5 1 G 1 17.0 1 7 1 11.0 1 1 2 13.5 1 D 2 13.0 1 3 3 13.5 1 D 3 27.0 2 7 4 Case length (Radial lead type) Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0 0 0 0 0 0 0 0 B C D E F G H J K 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 0 1 1 1 1 1 1 1 1 1 1 B C D E F G H J K 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 0 2 2 2 2 2 2 2 2 2 2 B C D E F G H J K 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 0 3 3 3 3 3 3 3 3 3 3 B C D E F G H J K 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 0 4 4 4 4 4 4 4 4 4 4 B C D E F G H J K Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 0 5 5 5 5 5 5 5 5 5 5 B C D E F G H J K 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 0 6 6 6 6 6 6 6 6 6 6 B C D E F G H J K 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 0 7 7 7 7 7 7 7 7 7 7 B C D E F G H J K 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 0 8 8 8 8 8 8 8 8 8 8 B C D E F G H J K 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 0 9 9 9 9 9 9 9 9 9 9 B C D E F G H J K Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 1 A A A A A A A A A 0 1 2 3 4 5 6 7 8 9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 1 B B B B B B B B B 1 1 2 3 4 5 6 7 8 9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 1 C C C C C C C C C 2 1 2 3 4 5 6 7 8 9 13.0 13.1 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 1 D D D D D D D D D 3 1 2 3 4 5 6 7 8 9 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 1 E E E E E E E E E 4 1 2 3 4 5 6 7 8 9 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 378 CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 15.0 15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 1 F F F F F F F F F 5 1 2 3 4 5 6 7 8 9 16.0 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 1 G G G G G G G G G 6 1 2 3 4 5 6 7 8 9 17.0 17.1 17.2 17.3 17.4 17.5 17.6 17.7 17.8 17.9 1 H H H H H H H H H 7 1 2 3 4 5 6 7 8 9 18.0 18.1 18.2 18.3 18.4 18.5 18.6 18.7 18.8 18.9 1 J J J J J J J J J 8 1 2 3 4 5 6 7 8 9 19.0 19.1 19.2 19.3 19.4 19.5 19.6 19.7 19.8 19.9 1 K K K K K K K K K 9 1 2 3 4 5 6 7 8 9 Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 27.5 28.0 28.5 29.0 29.5 2 L 2 L 2 L 2 L 2 L 2 M 2 M 2 M 2 M 2 M 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 30.0 30.5 31.0 31.5 32.0 32.5 33.0 33.5 34.0 34.5 35.0 35.5 36.0 36.5 37.0 37.5 38.0 38.5 39.0 39.5 3 N 3 N 3 N 3 N 3 N 3 P 3 P 3 P 3 P 3 P 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 44.5 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 49.5 4 Q 4 Q 4 Q 4 Q 4 Q 4 R 4 R 4 R 4 R 4 R 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 50.0 50.5 51.0 51.5 52.0 52.5 53.0 53.5 54.0 54.5 55.0 55.5 56.0 56.5 57.0 57.5 58.0 58.5 59.0 59.5 5 S 5 S 5 S 5 S 5 S 5 T 5 T 5 T 5 T 5 T 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.5 65.0 65.5 66.0 66.5 67.0 67.5 68.0 68.5 69.0 69.5 6 U 6 U 6 U 6 U 6 U 6 V 6 V 6 V 6 V 6 V 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 Case length [mm] 16th 17th Case length [mm] 16th 17th 70.0 70.5 71.0 71.5 72.0 72.5 73.0 73.5 74.0 74.5 75.0 75.5 76.0 76.5 77.0 77.5 78.0 78.5 79.0 79.5 7 W 7 W 7 W 7 W 7 W 7 X 7 X 7 X 7 X 7 X 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 80.0 80.5 81.0 81.5 82.0 82.5 83.0 83.5 84.0 84.5 85.0 85.5 86.0 86.5 87.0 87.5 88.0 88.5 89.0 89.5 8 Y 8 Y 8 Y 8 Y 8 Y 8 Z 8 Z 8 Z 8 Z 8 Z 0 1 1 3 2 5 3 7 4 9 5 1 6 3 7 5 8 7 9 9 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 379 CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Case length (Snap-in type / Screw mount terminal type) Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 20 21 22 23 24 25 26 27 28 29 2 2 2 2 2 2 2 2 2 2 0 1 2 3 4 5 6 7 8 9 30 31 32 33 34 35 36 37 38 39 3 3 3 3 3 3 3 3 3 3 0 1 2 3 4 5 6 7 8 9 40 41 42 43 44 45 46 47 48 49 4 4 4 4 4 4 4 4 4 4 0 1 2 3 4 5 6 7 8 9 50 51 52 53 54 55 56 57 58 59 5 5 5 5 5 5 5 5 5 5 0 1 2 3 4 5 6 7 8 9 60 61 62 63 64 65 66 67 68 69 6 6 6 6 6 6 6 6 6 6 0 1 2 3 4 5 6 7 8 9 Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 70 71 72 73 74 75 76 77 78 79 7 7 7 7 7 7 7 7 7 7 0 1 2 3 4 5 6 7 8 9 80 81 82 83 84 85 86 87 88 89 8 8 8 8 8 8 8 8 8 8 0 1 2 3 4 5 6 7 8 9 90 91 92 93 94 95 96 97 98 99 9 9 9 9 9 9 9 9 9 9 0 1 2 3 4 5 6 7 8 9 100 101 102 103 104 105 106 107 108 109 A A A A A A A A A A 0 1 2 3 4 5 6 7 8 9 110 111 112 113 114 115 116 117 118 119 B B B B B B B B B B 0 1 2 3 4 5 6 7 8 9 Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 120 121 122 123 124 125 126 127 128 129 C C C C C C C C C C 0 1 2 3 4 5 6 7 8 9 130 131 132 133 134 135 136 137 138 139 D D D D D D D D D D 0 1 2 3 4 5 6 7 8 9 140 141 142 143 144 145 146 147 148 149 E E E E E E E E E E 0 1 2 3 4 5 6 7 8 9 150 151 152 153 154 155 156 157 158 159 F F F F F F F F F F 0 1 2 3 4 5 6 7 8 9 160 161 162 163 164 165 166 167 168 169 G G G G G G G G G G 0 1 2 3 4 5 6 7 8 9 Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 170 171 172 173 174 175 176 177 178 179 H H H H H H H H H H 0 1 2 3 4 5 6 7 8 9 180 181 182 183 184 185 186 187 188 189 J J J J J J J J J J 0 1 2 3 4 5 6 7 8 9 190 191 192 193 194 195 196 197 198 199 K K K K K K K K K K 0 1 2 3 4 5 6 7 8 9 200 201 202 203 204 205 206 207 208 209 L L L L L L L L L L 0 1 2 3 4 5 6 7 8 9 210 211 212 213 214 215 216 217 218 219 M M M M M M M M M M 0 1 2 3 4 5 6 7 8 9 Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th Case length [mm] 16th 17th 220 221 222 223 224 225 226 227 228 229 N N N N N N N N N N 0 1 2 3 4 5 6 7 8 9 230 231 232 233 234 235 236 237 238 239 P P P P P P P P P P 0 1 2 3 4 5 6 7 8 9 240 241 242 243 244 245 246 247 248 249 Q Q Q Q Q Q Q Q Q Q 0 1 2 3 4 5 6 7 8 9 250 251 252 253 254 255 256 257 258 259 R R R R R R R R R R 0 1 2 3 4 5 6 7 8 9 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 380 CAT. No. E1001O Return Group Chart PART NUMBERING SYSTEM Supplement code Conductive polymer Chip and Radial lead type / Electrolytic Chip type Terminal plating material Coating case Sn S Sn-Bi G Radial lead type / Snap-in type Terminal plating material Sn Sn-Bi Outer sleeve PET S D Coating case H G Polyolefin L - Pb-free PVC M - * Standard design of "environmental friendly" snap-in are not equipped with a plastic disk on the top of the can case. We also produce snap-in type with "Plastic disk, PVC sleeve and Sn terminal plating". In this case, supplement code (the 18th digit) is "T". Screw mount terminal type Screw terminal Pb-free PVC Polyolefin PET M S C Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 381 CAT. No. E1001O 2014/2015 ALUMINUM ELECTROLYTIC CAPACITORS ELECTRONIC COMPONENTS & DEVICES PRODUCTS CAT.No. Aluminum Electrolytic Capacitors 1001 Multilayer Ceramic Capacitors 1002 Film Capacitors 1003 Metal Oxide Varistors TNRTM 1006 Amorphous / Dust Choke Coils 1008 Electric Double Layer Capacitors 1009 CAT.NO.E1001O Electro-Mechanical Products Notes on Safety [ English ] Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. The electronic components described in this catalogue were designed and developed for use in general electronic equipment, such as ; general household appliances, office and AV equipment, information and communication equipment, etc. We ask you, therefore, to appraise, examine and judge the suitability of these electronic components very carefully, or contact us, for designs that require higher levels of safety and reliability, such as ; medical or aerospace equipment, equipment related to nuclear power, safety devices for automotive products, or disaster prevention equipment. When using these components for circuits in general electronic equipment that also require higher levels or safety and reliability, we recommend that you carry out a thorough appraisal of the component's intended use in the application and add any necessary protection networks during the design phase. NIPPON CHEMI-CON CORPORATION Distributed or Represented by '14.07 NIPPON CHEMI-CON http://www.chemi-con.co.jp/e/ ELECTRONIC COMPONENTS & DEVICES 2014/2015 English CAT.NO.E1001O ALUMINUM ELECTROLYTIC CAPACITORS Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: United Chemi-Con (UCC): APS-200ETD101MHB5S APSA6R3ELL391MHB5S PSA2.5VB680MH11E9 PXA10VC56RMF60TP APSA100ELL271MHB5S APSA2R5ELL821MHB5S PXA6.3VC101MF60TP APS-100ELL471MJC5S APS100ETD471MJC5S APS-160ETD331MJC5S APS-6R3ELL391MHB5S APSA2R5ELL102MJB5S APSA2R5ELL681MHB5S APSA4R0ELL561MHB5S PXA6R3VC221MH70TP APSF2R5ELL331MF08S PXA16VC331MJ12TP PSA6.3VB220MF11 APXA2R5ARA152MJC0S APXA6R3ARA101MF45G APXA160ARA101MJ80G APSA160ELL101MFA5S APSA6R3ETD221MFA5S APSA4R0ETD561MHB5S APSA2R5ELL391MFA5S APS-250ELL101MJC5S APSA4R0ETD821MJB5S APS-6R3ETD681MJC5S APS350ELL180MHB5S 6PS390MH11 APS-160ELL271MJC5S APSE2R5ELL681MH06S 6PS390MH11-T15 4PS820MJ12-T14 APSA100ETD151MFA5S APSA160ELL101MFA5G APSA6R3ETD681MJB5S 16PS330MBJ12 2R5PS680MH11 APSC6R3ELL222MJB5T APS-100ETD271MHB5S APS-160ELL271MJA5S APXE6R3ARA331MF61G APSA2R5ELL681MHB5D APSA6R3ETD391MHB5S APSA2R5ELL391MFA5G APXF2R5ARA331ME61G APXF4R0ARA391MF80G APXF6R3ARA331MF80G APSC6R3ELL561MH08S 16PS180MH11T15 APSA100ELL680MFA5G APSA6R3ETD221MFA5G 16PS330MJ12T14 APXF4R0ARA471MH70G APSC2R5ELL152MHB5S APXA100ARA561MJC0S 10PS470MJ12 APSA6R3ELL331MFA5G APSA4R0ELL391MFA5G APSE4R0ETD561MF08S 4PS560MAH11F18 APXA160ARA331MJC0S APSA100ELL470MFA5G APSC2R5ETD821MH08S APXF2R5ARA681MH70G 6PS680MJ12T14 APSA2R5ETD821MHB5S APSA4R0ELL821MJB5D APXF2R5ARA391ME61G APSC6R3ELL821MJB5S APSC2R5EC3821MH08S APSC2R5ELL272MJB5S APXF6R3ARA151ME61G APXF6R3ARA331MH70G APSE2R5ELL821MF08S APSA6R3ELL221MFA5G APXF2R0ARA681MF61G 25PS68MH11T15 APXA100ARA271MHC0S APSC100ELL391MHB5S APXF2R5ARA561MF61G 6PS1000MJ12 APXF6R3ARA151ME46G APSA4R0ELL271MFA5G APSE2R5EC3681MH06S APSE4R0ELL561MF08S APXF2R5ARA561MH70G APXF2R5ARA561MF80G APSA100ELL151MFA5G APXA6R3ARA681MJC0S APXA100ARA471MJC0S APSA2R5ELL102MJB5D APSC100ELL681MJB5S APXA6R3ARA331MJ80 APXF6R3ARA271MF80G 4PS560MH11 APSE6R3ELL471MF08S APXA6R3ARA821MJC0S APXF2R5ARA221ME46G