
SHANGHAI SUNRISE ELECTRONICS CO., LTD.
FEATURES
• Ideal for surface mount pick and
place application
• Low profile package
• Built-in strain relief
• High surge capability
• Glass passivated chip
• Super fast recovery for high efficiency
• High temperature soldering guaranteed:
260oC/10sec/at terminal
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O
recognized flame retardant epoxy
• Polarity: Color band denotes cathode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SYMBOL ES1A ES1B ES1C ES1D ES1E ES1G UNITS
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 V
Maximum RMS Voltage VRMS 35 70 105 140 210 280 V
Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 V
Maximum Average Forward Rectified Current
(TL=110oC)
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
(at rated forward current)
Maximum DC Reverse Current T
=25oCµA
(at rated DC blocking voltage) Ta=100oCµA
Maximum Reverse Recovery Time (Note 1) trr nS
Typical Junction Capacitance (Note 2) CJpF
Typical Thermal Resistance (Note 3) Rθ(ja) oC/W
Storage and Operation Junction Temperature TSTG,TJoC
Note:
1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A.
2.Measured at 1.0 MHz and applied voltage of 4.0Vdc
3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area
http://www.sse-diode.com
10
40
-50 to +150
IR5.0
200
35
IFSM 30 A
VF0.95 1.25 V
ES1A THRU ES1G
SURFACE MOUNT SUPER
FAST SWITCHING RECTIFIER
VOLTAGE: 50 TO 400V CURRENT: 1.0A
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
IF(AV) 1.0 A
TECHNICAL
SPECIFICATION
SMA/DO-214AC
Dimensions in inches and
millimeters
ABCD
MAX. .110
2.79
.177
4.50
.058
1.47
.012
0.305
MIN. .100
2.54
.157
3.99
.052
1.32
.006
0.152
EFGH
MAX. .208
5.28
.090
2.29
.008
0.203
.060
1.52
MIN. .194
4.93
.078
1.98
.004
0.102
.030
0.76
B
CA
D
GH
F