Product Data Sheet Product Data Sheet 3MTM Static Shielding Bag 1000 This transparent metal-in static shielding bag is designed to provide a static safe environment for sensitive electronic devices. Bags are printed with an ESD warning symbol and a lot code for traceability. Open top and ZipTop styles are available. The bags are heat sealable. 3M Static Shielding Bags 1000 are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer is intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric field. These bags are tested to meet or exceed certain electrical and physical requirements of Static Shielding Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS Compliant* and lead-free**. 3MTM Static Shielding Bag 1000, Open Top 3MTM Static Shielding Bag 1000, ZipTop Physical Typical Value Testing Method Tensile Strength 4600 PSI, 32 MPa ASTM D882 Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method 2065 Seal Strength 11 lbs, 48 N ASTM D882 Thickness 2.8 mils, .071 mm +/-15% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 Surface Resistance Interior <1x1011 ohms ANSI/ESD STM11.11 Surface Resistance Exterior <1x1011 ohms ANSI/ESD STM11.11 Static Decay < 2 seconds ETS 406D Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 300F - 375F, 149C - 190C Time 0.5 - 3.5 seconds Pressure 30 - 70 PSI, 206 - 482 KPa This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. Product Data Sheet 3MTM Static Shielding Bag 1000 Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. 2x3 10023 6 x 30 100630 12 x 12 1001212 2x3 30023 6 x 10 300610 10 x 30 3001030 2x4 10024 6.5 x 10 1006.51 12 x 14 1001214 3x3 30033 6 x 24 300624 11 x 15 3001115 2x6 10026 6.5 x 16 1006.516 12 x 16 1001216 3x4 30034 6 x 30 300630 12 x 12 3001212 3x3 10033 7 x 10 100710 12 x 18 1001218 3x5 30035 7 x 15 300715 12 x 16 3001216 3x5 10035 7 x 11 100711 12 x 24 1001224 4x4 30044 8x8 30088 12 x 18 3001218 4x4 10044 7 x 15 100715 12 x 25 1001225 4x6 30046 8 x 10 300810 14 x 18 3001418 4x6 10046 7 x 16 100716 12 x 30 1001230 4x8 30048 8 x 12 300812 15 x 18 3001518 4x8 10048 8x8 10088 14 x 18 1001418 4 x 24 300424 9 x 12 300912 16 x 24 3001624 4 x 24 100424 8 x 10 100810 14 x 20 1001420 4 x 30 300430 10 x 10 3001010 18 x 18 3001818 4 x 26 100426 8 x 12 100812 14 x 30 1001430 5x8 30058 10 x 12 3001012 18 x 24 3001824 4 x 30 100430 8 x 18 100818 15 x 18 1001518 5 x 10 300510 10 x 14 3001014 20 x 24 3002024 5x6 10056 8 x 24 100824 16 x 18 1001618 6x8 30068 10 x 24 3001024 24 x 24 3002424 5x7 10057 8 x 30 100830 16 x 20 1001620 Custom Sizes and Printing Available. 5x8 10058 9 x 12 100912 16 x 24 1001624 5 x 10 100510 10 x 12 1001012 18 x 18 1001818 6x8 10068 10 x 14 1001014 18 x 20 1001820 6x9 10069 10 x 16 1001016 18 x 24 1001824 6 x 10 100610 10 x 18 1001018 18 x 30 1001830 6 x 12 100612 10 x 24 1001024 20 x 20 1002020 6 x 14 100614 10 x 26 1001026 20 x 24 1002024 6 x 16 100616 10 x 30 1001030 22 x 24 1002224 6 x 18 100618 11 x 14 1001114 24 x 24 1002424 6 x 24 100624 11 x 15 1001115 24 x 30 1002430 6 x 26 100626 30 x 24 1003024 Custom Sizes and Printing Available. * Standard sizes stocked for prompt shipment (usually same day). * Width is measured from inside seam to inside seam. * Length is measured from the top edge to the bottom fold. * Opening is in the "width" dimension. * Custom bag sizes, custom printing, and custom hot stamping are available. * Most sizes are packed 100 per case. * Small sizes are packed 500 or 1,000 per case. Product Data Sheet 3MTM Static Shielding Bag 1000 OpenOpen Top Top BagBag ZipTop Bag ZipTop Bag Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 Seal width Tolerance (inches): Width+/-0,0.125 +0.250 Length +/- 0.125 Offset 0 to 0.250 Seal width +/- 0.125 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values ("MCVs") in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty section. **Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Email: 3mstaticinfo@mmm.com www.3Mstatic.com Please recycle. Printed in USA. (c) 3M 2013. All rights reserved. 98-0799-1134-7 JHA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: SCS: 10057 30035 1001212 1001214 1001216 1001818 10068 10035 10024 30023 3001012 100610 300430 1002024 3001014 30046 3001824 3001518 300610 30058 100812 300812 100810 300424 300810 3001818 10058 1001418 300630 100424 10046 3001030 3001218 1001218 1001012 1001014 1001016 1001018 1001024 1001026 1001030 1001114 1001115 1001224 1001230 1001416 1001420 1001430 1001518 1001618 1001620 1001624 1002224 10023 1002424 1002430 10026 1003024 100426 100430 10044 100510 1006.516 100612 100614 100616 100618 100624 100626 100630 100710 100711 100716 10078 100814 100818 100824 10088 100912 3001010 3001024 3001115 3001212 3001216 3001418 3001624 3002024 3002424 30033 30044 30048 300510 300624 30068 300715 30088 300912 1001225 1001630 1001820