AMB8350 - AMBER WIRELESS GMBH - Datasheet.Directory

AMB8350

Medium-Range Data Modem

868 MHz Band

Key Features

• Multi-channel, narrowband RF data modem

• Transmit power 20 mW

• Range up to 2km (line of sight)

• RF data rates up to 57.6 kbps

• Integrated microcontroller (300 byte data buffer)

• Flexible software stack to suit a wide range of

applications

• Complies with R&TTE directive 1999/5/EC

• Licence-free within Europe

Network Topologies

Point-to-Point

Point-to-Multipoint

Description

The AMB8350 is a powerful OEM radio data modem enabling cable-free and

reliable transmission of data over medium distances. The embedded

microprocessor controls the complete wireless data communication, thus

handling packet and checksum formation, addressing, monitoring of channel

access and resending of unacknowledged data packets. A buffer memory is

provided to enable transmission and reception of data independently of the

connected host controller. The radio modem can be used as a transparent

cable replacement.

The AMB8350 features a command set of various transmission modes to

meet the requirements of the respective application. It provides a broadcast

operation mode and it enables the user to address up to 254 devices per

channel.

The GUI for the freely available Windows application AMBER-ACC makes it

easy to set the operating parameters. The configuration of the parameters

can alternatively be realised by means of AT-commands.

Interface

The AMB8350 is connected to a host system via RS-232 interface with data

rates of up to 115.2 kbaud. Alternative host interface options: RS-485 or

USB.

Scope of Application

Telemetry, wide-ranging data collection systems, monitoring, surveying,

remote control and wireless sensor networks.

AMBER wireless GmbH assumes that the statements made in this data sheet are correct at the time of issue. AMBER wireless GmbH reserves the right to make changes to

technical specifications or product functions without prior notice. AMBER wireless GmbH does not assume any responsibility for the use of the described products, neither does it

convey any license under its patent rights. All trademarks, registered trademarks and product names are the property of their owners.

AMB8350



2009 AMBER wireless GmbH AMB8350 DS V1.1

Dimensions

Pin Assignment Main Connector

Pin Description

DSR Data Set Ready

DTR Data Terminal Ready

RX Receive Data

TX Transmit Data

RTS Request to Send

CTS Clear to Send

VIN Positive supply voltage

GND Negative supply voltage

AD6 Reserved

Specifications

Range* Up to 2 km (line of sight)

RF data rate 10 or 57.6 kbaud

Interface data rate Up to 115.2 kbaud (UART)

Output power Max. 13 dBm (@ 50 Ω, adjustable)

Performance

RF sensitivity -108 dBm (@ 50 Ω)

Power supply 4 to 10 VDC

Current consumption TX: 105 mA

RX: 55 mA

Dimensions 80 x 38 x 12.5 mm³

Operating temperature -10 to +55 °C

Weight 23 g (without antenna connector)

Antenna connector SMA or BNC possible assembly

Status indication 4 LEDs (Power, Status, RX, TX)

Microprocessor ATMEL AT91SAM7Sxx

General

RF transceiver 20 mW transceiver AMB8310

Addressing Up to 254 nodes

Frequency range 868.059 to 869.621 MHz

Channel spacing 39 kHz

Number of channels Max. 31 channels

Modulation 2-(G)FSK

RF technology

Supported network topologies Point-to-Point, Point-to-Multipoint

* Range stated is calculated assuming line-of-sight. Actual range will vary based upon specific board integration, antenna selection, and environment.