Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive Data Sheet 1 For Automotive EMIFILr (Capacitor type) for Automotive NFM31H Series (1206 Size) c Dimensions 1.20.3 0.40.3 1.60.2 Insertion Loss (dB) 20 3.20.2 (2) (2) NFM31HK104R1H3 40 NFM31HK223R1H3 NFM31HK153R1H3 60 NFM31HK103R1H3 NFM31HK103R2A3 1.60.2 (3) 80 0.30.2 (1) (50 - 50) 0 1.30.2 0.40.3 c Insertion Loss Characteristics (Main Items) 100 0.1 : Electrode 1 10 100 Frequency (MHz) (in mm) c Equivalent Circuit 1000 6000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Rated Voltage Insulation Resistance (min.) Operating Temperature Range 10A 50Vdc 1000M ohm -55 to +125C 10A 100Vdc 1000M ohm -55 to +125C 15000pF 20% 10A 50Vdc 1000M ohm -55 to +125C NFM31HK223R1H3p 22000pF 20% 10A 50Vdc 1000M ohm -55 to +125C NFM31HK104R1H3p 100000pF 20% 6A 50Vdc 1000M ohm -55 to +125C Part Number Capacitance Rated Current NFM31HK103R1H3p 10000pF 20% NFM31HK103R2A3p 10000pF 20% NFM31HK153R1H3p Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > For Automotive > EMIFILr (Capacitor type) for Automotive Data Sheet 2 Continued from the preceding page. c Derating of Rated Current When NFM31H series is used in operating temperatures exceeding +105C, derating of current is necessary. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Rated Current (A) 10 6 0 -55 105 125 Operating Temperature (C) c !Caution/Notice !Caution (Rating) 1. Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for Automotive Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/ Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: NFM31HK153R1H3L NFM31HK104R1H3L NFM31HK103R2A3L NFM31HK103R1H3L NFM31HK223R1H3L