Catalog Dimensions in Inches and (mm)
Type Symbol Amps A E F N C D
2.38 .50 .03 .14 1.44 .54
HRCI-CB CIF06B 1-30A (60.40) (12.70) (0.81) (3.50) (35.50) (13.80)
HRCI-CB Industrial Ceramic Body Fuse CIF06
Clip-In Mounting
Form No. HRCI-CB
Page 1 of 2
Data Sheet: 4128
Bussmann®
6-3-04 SB04168
A
C
DE
NF
Catalog Symbol: CIF06B (1 - 30A)
600Vac; 250Vdc
Interrupting Rating: 200,000A RMS Symmetrical
CSA C22.2 NO. 106-M92 (3-30A only)
• Industrial miniature fuse with offset blades for clip-in mounting.
• Ground ceramic body with plated endcaps.
• Provides both short circuit and overload protection.
• CIF06 fits the 30A SafeLOC fuseholder.
Dimensional Data
6-3-04 SB04168
HRCI-CB Industrial Ceramic Body Fuse CIF06
Clip-In Mounting
Form No. HRCI-CB
Page 2 of 2
Data Sheet: 4128
Bussmann®
Time/Current-Curves (Cat. No. CIF06)Peak Let-Through Curves (Cat. No. CIF06)
10,000
1,000
100
10
1
1,000
100
10
1
.1
CURRENT IN AMPERES
TIME IN SECONDS
.01
3
6
10
15
25
30
AMPERE
RATING
20
1
10
100
1,000
10,000
3
6
10
15
20
25
FUSE RATING (AMPERES)
AMPERE2 SECONDS (I2t)
100,000
30
Total I2t at 600V
Total I2t at 460V
Pre-Arcing I2t
100
10
1
.1
1,000
100
10
1
PROSPECTIVE CURRENT (SYM. RMS KA)
PEAK CURRENT (KA)
0.1
6
10
15
20
25
30
AMPERE
RATING
3
Energy Let-Through Curves (Cat. No. CIF06)
Power Dissipation @ Rated Amps
Catalog No. Watts
1CIF06 –
3CIF06B 1.8
6CIF06B 1.5
10CIF06B 3.4
15CIF06B 2.4
20CIF06B 3.2
25CIF06B 3.6
30CIF06B 3.6
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann
Network Drive. All other copies of this Data Sheet are by definition uncontrolled.This bulletin is intended
to clearly present comprehensive product data and provide technical information that will help the end
user with design applications. Bussmann reserves the right, without notice, to change design or con-
struction of any products and to discontinue or limit distribution of any products. Bussmann also
reserves the right to change or update, without notice, any technical information contained in this
bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
