© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1
One world. One KEMET
Benets
• Meets or exceeds EIA Standard 535BAAC
• Taped and reeled per EIA 481–1
• Symmetrical, compliant terminations
• Optional gold-plated terminations
• Laser-marked case
• 100% surge current testing
• Complies with AEC–Q200
• Capacitance values of 0.47 μF to 220 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 6 – 50 VDC
• 100% steady-state accelerated aging
• Temperature/voltage derating is 2/3 at 150°C
• RoHS Compliant and lead-free terminations standard
• Operating temperature range of -55˚C to +150˚C
Applications
Typical applications include decoupling and ltering in industrial
and automotive end applications such as DC/DC converters,
portable electronics, telecommunications, and control units
operating at temperatures up to 150°C.
Overview
The KEMET T498 Series is a high temperature product that
offers optimum performance characteristics in applications
with operating temperatures up to 150°C. Advanced materials
and testing allow this series to perform with a reliability level of
0.5%/1,000 hours at rated voltage and temperature. The T498
Series is available in ve standard EIA case sizes with RoHS
compliant terminations as standard.
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specic part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 22
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Ordering Information
T498 X227 M010 A T E800
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Packaging
(C-Spec)
T =
Tantalum
High
Temperature
150ºC
A, B, C, D, X First two digits
represent
signicant
gures. Third
digit species
number of
zeros.
K = ±10%
M = ±20%
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
Z = N/A
T = 100%
Matte Tin (Sn)
Plated
G = Gold
Plated
Last three
digits specify
ESR in mΩ.
(800 = 800
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 150°C
Rated Capacitance Range 0.33 – 220 μF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 6 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specication Table
ESR (100 kHz) Refer to Part Number Electrical Specication Table
Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 33
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Qualication
Test Condition Characteristics
Endurance 150°C @ 2/3 rated voltage, 2,000 hours
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 150°C @ 0 volts, 2,000 hours
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MIL–STD–202, Method 107, Condition B, mounted, -55°C to
150°C, 1,000 cycles
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +150ºC, +25ºC
+25°C -55°C +85°C +150°C
ΔC/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(150°C, 1.2 x rated voltage)
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 44
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Electrical Characteristics
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T498B106M010ATE1K8
T498D476M010ATE600
T498X227M010ATE500
Capacitance vs. Frequency
ESR vs. Frequency
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T498B106M010ATE1K8_IMP
T498D476M010ATE600_IMP
T498B106M010ATE1K8_ESR
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18 3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10
(.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B3528–21 3.5 ±02
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10
(.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
C6032–28 6.0 ±0.3
(0.236 ±0.03)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D7343–31 7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43 7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10
(.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low prole cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specied dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 55
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Rated
Voltage
Rated
Cap Case Code/
Case Size
KEMET Part
Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options) µA +20ºC
Max/5 Min % @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC (mA) 100 kHz
85ºC (mA) 100 kHz
125ºC Reow Temp
≤ 260ºC
6.3 10 B/3528-21 T498B106(1)006A(2)E2K1 0.6 6.0 2100 201 181 80 1
6.3 15 B/3528-21 T498B156(1)006A(2)E1K8 0.9 6.0 1800 217 195 87 1
6.3 22 C/6032-28 T498C226(1)006A(2)E1K3 1.4 6.0 1300 291 262 116 1
6.3 33 B/3528-21 T498B336(1)006A(2)E1K7 2.1 6.0 1700 224 202 90 1
6.3 47 C/6032-28 T498C476(1)006A(2)E800 3.0 6.0 800 371 334 148 1
6.3 100 D/7343-31 T498D107(1)006A(2)E600 6.3 8.0 600 500 450 200 1
10 2.2 A/3216-18 T498A225(1)010A(2)E4K6 0.5 6.0 4600 128 115 51 1
10 3.3 A/3216-18 T498A335(1)010A(2)E3K6 0.5 6.0 3600 144 130 58 1
10 4.7 A/3216-18 T498A475(1)010A(2)E2K9 0.5 6.0 2900 161 145 64 1
10 4.7 B/3528-21 T498B475(1)010A(2)E2K7 0.5 6.0 2700 177 159 71 1
10 10 B/3528-21 T498B106(1)010A(2)E1K8 1.0 6.0 1800 217 195 87 1
10 15 B/3528-21 T498B156(1)010A(2)E1K5 1.5 6.0 1500 238 214 95 1
10 15 C/6032-28 T498C156(1)010A(2)E1K8 1.5 6.0 1800 247 222 99 1
10 22 B/3528-21 T498B226(1)010A(2)E1K5 2.2 6.0 1500 238 214 95 1
10 22 C/6032-28 T498C226(1)010A(2)E1K1 2.2 6.0 1100 316 284 126 1
10 47 D/7343-31 T498D476(1)010A(2)E600 4.7 6.0 600 500 450 200 1
10 100 D/7343-31 T498D107(1)010A(2)E600 10.0 8.0 600 500 450 200 1
10 220 X/7343-43 T498X227(1)010A(2)E500 22.0 8.0 500 574 517 230 1
16 1A/3216-18 T498A105(1)016A(2)E6K5 0.5 4.0 6500 107 96 43 1
16 3.3 A/3216-18 T498A335(1)016A(2)E3K4 0.5 6.0 3400 149 134 60 1
16 4.7 B/3528-21 T498B475(1)016A(2)E2K1 0.8 6.0 2100 201 181 80 1
16 6.8 A/3216-18 T498A685(1)016A(2)E2K6 1.1 6.0 2600 170 153 68 1
16 6.8 B/3528-21 T498B685(1)016A(2)E1K8 1.1 6.0 1800 217 195 87 1
16 10 B/3528-21 T498B106(1)016A(2)E2K8 1.6 6.0 2800 174 157 70 1
16 10 C/6032-28 T498C106(1)016A(2)E1K4 1.6 6.0 1400 280 252 112 1
16 15 C/6032-28 T498C156(1)016A(2)E1K1 2.4 6.0 1100 316 284 126 1
16 22 C/6032-28 T498C226(1)016A(2)E1K0 3.5 6.0 1000 332 299 133 1
16 33 D/7343-31 T498D336(1)016A(2)E600 5.3 6.0 600 500 450 200 1
16 47 D/7343-31 T498D476(1)016A(2)E600 7.5 6.0 600 500 450 200 1
16 68 D/7343-31 T498D686(1)016A(2)E600 10.9 6.0 600 500 450 200 1
16 100 X/7343-43 T498X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1
20 1A/3216-18 T498A105(1)020A(2)E5K9 0.5 0.5 5900 113 102 45 1
20 10 C/6032-28 T498C106(1)020A(2)E1K1 2.0 2.0 1100 316 284 126 1
25 0.47 A/3216-18 T498A474(1)025A(2)E8K5 0.5 4.0 8500 94 85 38 1
25 2.2 B/3528-21 T498B225(1)025A(2)E3K0 0.6 6.0 3000 168 151 67 1
25 10 C/6032-28 T498C106(1)025A(2)E1K1 2.5 6.0 1100 316 284 126 1
25 10 D/7343-31 T498D106(1)025A(2)E1K0 2.5 6.0 1000 387 348 155 1
25 15 D/7343-31 T498D156(1)025A(2)E700 3.8 6.0 700 463 417 185 1
25 22 D/7343-31 T498D226(1)025A(2)E600 5.5 6.0 600 500 450 200 1
25 33 D/7343-31 T498D336(1)025A(2)E600 8.3 6.0 600 500 450 200 1
35 0.33 A/3216-18 T498A334(1)035A(2)E11K 0.5 4.0 11000 83 75 33 1
35 1A/3216-18 T498A105(1)035A(2)E10K 0.5 4.0 10000 87 78 35 1
35 1.5 C/6032-28 T498C155(1)035A(2)E3K3 0.5 6.0 3300 183 165 73 1
35 3.3 C/6032-28 T498C335(1)035A(2)E1K7 1.2 6.0 1700 254 229 102 1
35 6.8 D/7343-31 T498D685(1)035A(2)E900 2.4 6.0 900 408 367 163 1
VDC µF KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage Rated
Cap Case Code/
Case Size KEMET Part
Number DC
Leakage DF ESR Maximum Allowable
Ripple Current Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 66
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Rated
Voltage
Rated
Cap Case Code/
Case Size
KEMET Part
Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options) µA +20ºC
Max/5 Min % @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC (mA) 100 kHz
85ºC (mA) 100 kHz
125ºC Reow Temp
≤ 260ºC
35 10 D/7343-31 T498D106(1)035A(20E700 3.5 6.0 700 463 417 185 1
35 22 X/7343-43 T498X226(1)035A(2)E500 7.7 6.0 500 574 517 230 1
35 33 X/7343-43 T498X336(1)035A(2)E500 11.6 6.0 500 574 517 230 1
50 3.3 D/7343-31 T498D335(1)050A(2)E1K1 1.7 6.0 1100 369 332 148 1
50 10 D/7343-31 T498D106(1)050A(2)E1K0 5.0 6.0 1000 387 348 155 1
VDC µF KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage Rated
Cap Case Code/
Case Size KEMET Part
Number DC
Leakage DF ESR Maximum Allowable
Ripple Current Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 77
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
Rated
Voltage Working Voltage
Recommended
Application Voltage (for
maximum reliability)
85°C 150°C 85°C 150°C
6.3 6.3 4.22 3.15 2.08
10 10 6.70 53.30
16 16 10.72 85.28
20 20 13.40 10 6.60
25 25 16.75 12.5 8.25
35 35 23.45 17.5 11.55
50
50 33.50 25 16.50
Ripple Current/Ripple Voltage
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A3216–18 75
B3528–21 85
C6032–28 110
D7343–31 150
X7343–43 165
E7360–38 200
T428P 7360–38 325
S3216–12 60
T3528–12 70
U6032–15 90
V7343–20 125
T510X 7343–43 270
T510E 7360–38 285
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
125°C
150°C*
175°C**
1.00 0.90 0.40 0.30 0.20
T= Environmental Temperature
*T498 Only
**T499 Only
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at specied frequency (ohms)
0
0.2
0.4
0.6
0.8
1
1.2
-55 25 85 125 150
% Working Voltage
Temperat ure ( °C)
% Change in Working DC Voltage with
Temperature
Recommended Maximum Application
Voltage (As % of Rated Voltage)
67%
33%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 88
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identied on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C 15% of Rated Voltage
85°C 5% of Rated Voltage
125°C 1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2
A3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00
B3528-21 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
C6032-28 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60
D7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
X¹ 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 99
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
t
L
t
S
25
t
P
T
smax
T
L
T
P
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended prole
conditions for convection and IR reow reect the prole conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall prole (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reow occurs. Once reow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)100°C 150°C
Temperature Maximum (TSmax)150°C 200°C
Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (TL to TP)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)183°C 217°C
Time Above Liquidous (tL) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (t
P
)20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO
2
/Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1010
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Capacitor Marking
C, D, X Case Sizes
KEMET High
Temperature
150⁰C
Rated
Voltage
227
10 K
230
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
HT
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature uctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
Date Code*
Year Month
X = 2009 1 = Jan 7 = Jul
A = 2010 2 = Feb 8 = Aug
B = 2011 3 = Mar 9 = Spt
C = 2012 4 = Apr O = Oct
D = 2013 5 = May N = Nov
E = 2014 6 = Jun D = Dec
KEMET High
Temperature
150⁰C
Rated
Voltage
227
10V
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
K
C6 49 Internal Code
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1111
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U6032-15 12 1,000 5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D7343-31 12 500 2,500
Y7343-40 12 500 2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1212
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1313
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1414
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1515
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1616
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1717
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1818
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.03.26 11:20:23 -04'00'
