AZ942 16 AMP MINIATURE PC BOARD RELAY FEATURES * * * * * * Extremely low cost High switching capacity -- 16 Amps DC coils to 48 VDC UL, CUR file E44211; VDE file 6820 5 Class B insulation for high temperature operation Class F insulation available CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load Medium Duty Heavy Duty Max. switched power: 150 W or 2770 VA Max. switched current: 10 A Max. switched voltage: 30 VDC or 300 VAC UL Rating: 5 A at 30 VDC 10 A at 277 VAC 1/3 HP at 125 VAC (1 Form A) 2.9 A 125 VAC pilot duty (1 Form A) Max. switched power: 480 W or 4000 VA Max. switched current: 16 A Max. switched voltage: 30 VDC or 300 VAC UL Rating: 12 A at 28 VDC 12 A at 277 VAC 16A at 250 VAC 2.0 A at 240 VAC pilot duty GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1x107 1 x 105 at 10A, 277 VAC Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1750 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance 100 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage Material Silver alloy Dropout Resistance <100 milliohms initially (24 V, 1 A voltage drop method) Ambient Temperature COIL At nominal coil voltage Operating Class B: -40C(-40F) to 105C(221F) Class F: -40C(-40F) to 130C(266F) Storage Class B: -55C(-67F) to 130C(266F) Class F: -55C(-67F) to 155C(311F) Power At Pickup Voltage (typical) 230 mW Vibration 0.062" DA at 10-55Hz Max Continuous Dissipation Class B: 1.7 W at 20C (68F) ambient Class F: 2.2 W at 20C (68F) ambient Shock 10 g Enclosure P.B.T. polyester Temperature Rise 25C (45F) at nominal coil voltage Terminals Tinned copper alloy, P.C. Temperature Class B: Max. 130C (266F) Class F: Max. 155C (311F) Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 13 g NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 5 AZ942-1CT unsealed version is VDE approved at 5 A, 250 VAC, 50,000 operations. AZ942-1CT sealed or unsealed version is VDE approved at 7 A, 250 VAC, 6,000 operations. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 200-06-09 AZ942 RELAY ORDERING DATA STANDARD RELAYS: Medium Duty Type (10 Amp Contact) COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 3 Max. Continuous VDC 6.5 Coil Resistance 10% 25 Must Operate VDC 2.4 AZ942-1CH-3D AZ942-1CH-3DE 5 11.0 70 4.0 AZ942-1CH-5D AZ942-1CH-5DE 6 13.0 100 4.8 AZ942-1CH-6D AZ942-1CH-6DE 9 20.0 225 7.2 AZ942-1CH-9D AZ942-1CH-9DE 12 26.0 400 9.6 AZ942-1CH-12D AZ942-1CH-12DE Unsealed Sealed 24 52.0 1,600 19.2 AZ942-1CH-24D AZ942-1CH-24DE 48 104.0 6,200 38.4 AZ942-1CH-48D AZ942-1CH-48DE *Substitute "1AT" in place of "1CH" to indicate 1 Form A contact. To indicate Class F version, add suffix "F." RELAY ORDERING DATA STANDARD RELAYS: Heavy Duty Type (16 Amp Contact) COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 3 Max. Continuous VDC 6.5 Coil Resistance 10% 25 Must Operate VDC 2.4 AZ942-1CT-3D AZ942-1CT-3DE 5 11.0 70 4.0 AZ942-1CT-5D AZ942-1CT-5DE 6 13.0 100 4.8 AZ942-1CT-6D AZ942-1CT-6DE 9 20.0 225 7.2 AZ942-1CT-9D AZ942-1CT-9DE 12 26.0 400 9.6 AZ942-1CT-12D AZ942-1CT-12DE Unsealed Sealed 24 52.0 1,600 19.2 AZ942-1CT-24D AZ942-1CT-24DE 48 104.0 6,200 38.4 AZ942-1CT-48D AZ942-1CT-48DE *Substitute "1AW" in place of "1CT" to indicate 1 Form A contact. To indicate Class F version, add suffix "F." MECHANICAL DATA TERMINAL DIMENSIONS .89 (22.5) Terminal Number Dimensions 1 2, 5 3, 4 .013 X .040 .013 X .036 .013 X .040 .65 (16.5) PC BOARD LAYOUT .05 5 HOLES (1.3) .082 (2.1) WIRING DIAGRAM .016 (0.4) .65 (16.5) 3 2 .472 (12.0) CL * 1 .013 (0.3) .040 (1.0) 5 PLACES .078 (2.0) .138 (3.5) .480 (12.2) 4* 5 Viewed toward terminals *Not used on Form A relay Viewed toward terminals *Not used on Form A relay Dimensions in inches with metric equivalents in parentheses. Tolerance: 0.010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 200-06-09