8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
DIMENSIONS
multimec®
Cap solution for navigating
TH + 1ZB SMD w/LED + 1ZCS
Ordering example: 4x 5GTH93561+1ZB16DLMH13609 + 1x 5GTH93561+1ZCS16LMH12309 (with illumination) OR 4x 5GSH920+1ZB09 + 1x
5GSH920+1ZCS09 (without illumination) OR *5GTH92001Q (lluminated quiet version)
Please see colour codes, updates of products and changes of specifications on www.mec.dk
navimec™ 5G + 1ZB/1ZCS
■ Round solution
■ Designed for navigating a display or controlling a unit
■ 90° R=17.5 mm; Ø14.3 mm (Ø34.25 mm)
■ h =12.2 mm; 11.7 mm
■ Material: ABS/polycarbonate
■ Temp. Range:
• Solid cap: -40/+65°C
• Transparent cap: -40/+85°C
■ Panel cut-out: 1ZB-R1 7,1 R2 17,5 – 17,75 90° 1ZCS-Ø14.7
■ navimec™ panel cut-out: Ø35,0 - 35,5 Depending on application
** White legends on black caps are standard, other options are available but considered custom products. See pages 34-35 or www.mec.dk
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
ILLUMINATED – HOW TO ORDER
NON-ILLUMINATED– HOW TO ORDER
Switch
5 G
Switch
5 G
Mounting
TH9 through-hole
(SH9 surface mount)
Mounting
TH9 through-hole
(SH9 surface mount)
Actuation force
20
35
65
Q*
Actuation force
20
20Q
35
65
Legend code
DLMH136
LMH118 OK
LMH123
Legend code**
D136
038 RESET
105 ENTER
118 OK
119 SET
120 MENU
121 FUNC
122 HOME
123
Colour code
03 grey
06 white
09 black
30 ultra blue
40 dusty blue
42 aqua blue
50 metal dark blue
53 metal light grey
57 metal dark grey
58 metal bordeaux
LED
01 blue
22 green
42 yellow
61 white
82 red
2242 green/yellow
8222 red/green
8242 red/yellow
Cap
1 Z B 1 6
Frosted white with black hard
paint and laser marking
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
1 Z C S 1 6
Cap
1 Z B
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
1 Z C S
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
*For an illuminated quiet 2.0N switch add Q
to the end of the switch part number.
+
+
PCB layout for Navimec solution
SMD TH
21
We recommend using through-hole terminals
for precise placing.
All dimensions in mm Tolerances -/+0.2mm
pad printed
legends
31
4
2
4 2
1
3
43
21
4
31
2
34
12
3
4
1
2
4
3 1
21 3
2 4
34
1 2
43
2 1
25,00
25,00
25,00
25,00
31
4
2
4 2
1
3
43
21
4
31
2
34
12
3
4
1
2
4
3 1
21 3
2 4
34
1 2
43
2 1
25,00
25,00
25,00
25,00
multimec®
5 series switches basic switch modules
■ rough-hole (TH) or surface mount (SMD)
■ 50mA/24VDC
■ Single pole/momentary
■ 10,000,000 operations lifetime (NO function)
■ Temperature range:
• Switch: -40/+160°C
• LED: -40/+85°C
■ IP 67 sealing
■ Actuation force: 2.0N, 3.5N, 6.5N
■ NO or NC/NO
THROUGH-HOLE (TH)
SURFACE MOUNT (SMD)
NORMALLY CLOSED/NORMALLY OPEN FUNCTION NOT FOR SALE IN JAPAN
PCB LAYOUT
PCB LAYOUT
CIRCUIT DIAGRAM
5G
5G
5G illuminated
5G illuminated
5E
5E
Non-illuminated
Non-illuminated
1 LED
1 LED
2 LED
2 LED
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
4
6,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3
0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max 10,3Max
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3
0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max 10,3Max
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3 0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max
10,3Max
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
4
6,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
2
4
1
3
+3
-2 1
4
Ø 0,9
10,16
12,50
7,62
7,62
1,20
2,50
-2 1
+3
4
Ø 0,9
-2 1
4+3
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3 0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max 10,3Max
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3 0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max 10,3Max
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
14
0,3
8,5
7,62
0,8
8,5
10,16Min
Max 12,5
7,62
0,3 0,8
6,4
6,5
7,62
0,8
14
0,3
6,4
10,16Min
Max 12,5
0,3
7,62
0,8
6,5
10,3Max 10,3Max
10
10
10
10
14
0,3
6,4
7,62
0,8
10,16Min
Max 12,5
0,3
4
7,62
0,8
7,62
0,8
10,16Min
Max 12,5
6,4
46,4
14
0,3
6,4
0,8
7,62
10
10
10
10
10
10
10
10
12,2
0,3
10,16Min
Max 12,5
8
0,8
7,62
90°
R=7,4
R=17,5
(actuated)
1,8
14
11,7
R11,5
7,62
0,8
14,3Ø
8
0,3
10,16
7,62
12,50
7,62
2,5
1,2
2
4
1
3
+3
-2 1
4
Ø 0,9
10,16
12,50
7,62
7,62
1,20
2,50
-2 1
+3
4
Ø 0,9
-2 1
4+3
8
0,8
7,62
12,2
0,3
10,16Min
Max 12,5
90°
R=7,4
R=17,5
(actuated)
10,16
7,62
14,3Ø
R11,5
11,7
0,8
7,62
8
1,8
14
0,3
7,62
12,50
2,5
1,2
Ø 0,9
1
3
2
4
1
3
2
4
■ Available for 5E and non-illuminated 5G in 3.5N actuation force.
■ Same PCB layout as the NO 5E and 5G
■ Housing colour is grey 2
4
3
1
Please see colour codes, updates of products and changes of specifications on www.mec.dk
38
All dimensions in mm Tolerances -/+0.2mm
RIGHT ANGLE SWITCHES PCB LAYOUT
ILLUMINATED – HOW TO ORDER
NON-ILLUMINATED– HOW TO ORDER
Ordering example: 5ESH935 (non-illuminated), 5GTH9658222 (illuminated), 5GSH935NCNO (normally closed/normally open); 5ETH920RAS (right angle)
5ETH920Q or 5GSH92061Q (quiet versions)
Please see colour codes, updates of products and changes of specifications on www.mec.dk
5E 5G 5G + 1SS 5G + 1DS
Switch
5 E
Switch
5 G
Mounting
TH9 through-hole
SH9 surface mount
Mounting
TH9 through-hole
SH9 surface mount
Actuation force
20
20Q
35
65
Actuation force
20
20Q
35
65
multimec®
5 series switches basic switch modules
Switch
5 G
Mounting
TH9 through-hole
SH9 surface mount
Actuation force
20
35
65
Quiet (optional)
Q
only for 2.0N
LED
01 blue
22 green
42 yellow
61 white
82 red
2242 green/yellow
8222 red/green
8242 red/yellow
RAS (optional)
RAS right angle switch
RAS (optional)
RAS right angle switch
NC/NO (only for 3.5N)
NCNO normally closed/
normally open function
NC/NO (only for 3.5N)
NCNO normally closed/
normally open function
multimec® 5 series has
only normally open (NO)
non-illuminated right angle
switch.
4:1 5E RAS
6,5
13,9
7,62
7,62
5,08
Ø1,0(3x)
1
3
11
10
5,5
7,62
5,08
7,62
12
4,8
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5 8,0 to 22,57,4
4:1 5G RAS + 1SS
11
5,08
12
7,62
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
22,3
4:1 5G+1DS
5,5
1
3
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5
4:1 5G RAS
4:1 5E RAS
6,5
13,9
7,62
7,62
5,08
Ø1,0(3x)
1
3
11
10
5,5
7,62
5,08
7,62
12
4,8
4:1 5E RAS
6,5
13,9
7,62
7,62
5,08
Ø1,0(3x)
1
3
11
10
5,5
7,62
5,08 7,62
12
4,8
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5
4:1 5G RAS
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5
4:1 5G RAS
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5
8,0 to 22,57,4
4:1 5G RAS + 1SS
11
5,08
12
13,8
7,62
1
3
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
5,5 8,0 to 22,57,4
4:1 5G RAS + 1SS
11
5,08
12
7,62
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
22,3
4:1 5G+1DS
5,5
1
3
11
5,08
12
7,62
7,62
7,62
5,08
Ø1,0(3x)
4,85
7,62
10
22,3
4:1 5G+1DS
5,5
1
3
4:1 5E RAS
6,5
13,9
7,62
7,62
5,08
Ø1,0(3x)
1
3
11
10
5,5
7,62
5,08 7,62
12
4,8
or
or
39
For product updates and/or changes of specifications please see www.mec.dk
44
multimec®
Technical specications
HIGH TEMPERATURE VERSIONS
SILVER GOLD NC/NO
ELECTRICAL SPECIFICATIONS
Contact resistance <30m Ω - typ. 10m Ω
Insulation resistance >10M Ω
Recommended load 0.5-50mA 24VDC 0.5µ-50mA 24VDC
Contact bounce <2mS - typically 0.5mS
MECHANICAL SPECIFICATIONS
Standard actuation force (switch) 2.0N, 3.5N, 6.5 N 3.5N
Max. Actuation force without cap 115N for 60 sec (according to MIL-PRF-22885H) 100N for 10 sec
Key travel (switch) 1 mm
Life time (switch) >10,000,000 cycles >1,000,000 cycles
TEMPERATURE RANGE
Working temperature Min -40°C Max +160°C
Storage temperature Min -40°C Max +160°C
5G with LED (working & storage temp) Min -30°C Max +85°C
Soldering (through-hole switch) IEC 68-2-20 8:
Infrared, vapour phase, wave - max 240°C for
max 40 sec or max 260°C for max 30 sec.
Soldering iron - max 350°C for max 3 sec.
Flux tight.
SOLDERING (SMD) JEDEC J-STD-020C
ENVIRONMETAL ENDURANCE IEC 68-2-3
Temperature +40°C
Humidity 93% RH
Duration 56 Days
TEMPERATURE CYCLING IEC 68-2-14
Temperature limit Min -55°C - Max +85°C
Number of cycles 200
Exposure time at each temperature 10 min
Recovery time before measurements 16 hrs
Sealing IEC 529 IP-67
Cleaning Standard methods - see usage guidelines
MATERIAL SPECIFICATIONS - SWITCHES
Housing PPS UL94V0
Actuator PPS UL94V0
Sealing + spring Silicone rubber
Contact spring Stainless steel Stainless steel
+ 3µAg + 1µAu
Fixed contacts SnCu + 2µNI + 3µAg SnCu + 2µNI + 1µAu
Terminals SnCu + 2µNI + 3µSn100
MATERIAL PARTS TEMP. LIMIT UL R ATING
ABS 1A, 1B, 1C, 1DS, 1ES, 1FS, 1H, 1JS, 1KS, 1LS, 1M, 1NS, 1PS, 1QS, 1RS, 1TS, 1US, 1VS,
1WAS, 1WDS, 1WPS, 1XS, 1Z, 1ZA, 1ZB, 1ZCS, 1ZW, 2C, 2D, 2K, reflectors for
1KBS/1KCS and 1YS
Max. 65⁰C UL94HB
Polycarbonate All lenses and transparent colour caps, lids for 1KBS/1KCS Max. 85⁰C UL94HB
Polyamide 1GAS/1GCS, 1SS, 2SS(the extender has no UL rating) Max. 160⁰C UL94V0
Legends Adhesion DS/EN ISO 2409 Class 1 & ASTM D3359 Class 4B
RoHS Compatible
Caps, Bezels & Legends – Material Specifications
5E-5G
For product updates and/or changes of specifications please see www.mec.dk
46
multimec®
LEDs For 5G and 3F switches
Specifications are subject to change without notice.
LEDs specifications
5G switches
Colour Blue Green Yellow White Red High Intensity
Green
Colour Codes 01 22 42 61 82 29
ABSOLUTE MAXIMUM RATINGS (Ta=25⁰C)
Power mW 110 75 60 48 65 102.5
Current forward mA 25 30 25 15 25 25
Forward peak current mA 100 80 60 100 100 150
Voltage reverse V 5 5 5 NA 12 5
Operating temperature ⁰C -40/+85 -55/+85 -40/+85 -40/+85 -30/+85 -40/+85
Storage temperature ⁰C -40/+85 -55/+85 -40/+90 -40/+85 -40/+85 -40/+85
Soldering temperature ⁰C 245 for max. 10 sec
ELECTRICALOPTICAL CHARACTERISTICS (Ta=25⁰C)
Voltage forward Typ. V 3.3 21.75** 2.85 23.3
Max. V 3.7 2.4 2.35 3.1 2.5 4.1
Current reverse (VR=5V) Max. μA 50 100 10 NA 100 50
Wave length nm 468 571 591 NA 633 525
Spread Δnm 25 NA 15 NA 16 30
Spread angle degree 120 130 120 150 160 60
Luminous Intensity Min. mcd 28.5 18 28.5 71 28 500
Typ. mcd 72* 35 72* 224* 180* 1000
Optical intensity Lm/w NA NA NA 36 7NA
*Max.mcd **Min. V
3F switches 3FXXX
(for 1E-1F-1N-1Q-1R-1S-1X)
3FXXX
(for 1K-1T-1U-1V-1W-1WD)
Colour B G Y W R G/Y R/G R/Y G Y R
Colour Codes 00 20 40 65 80 2040 8020 8040 24 46 87
Absolute Maximum
Ratings
(Ta=25⁰C)
Power mW 105 70 60 120 60 120 100 120 60 60 120
Current forward mA 30 20 20 25 20 25 30 25 25 25 50
Forward peak current mA 150 60** 60** 100 60** 150 120 150 60 60 200
Voltage reverse V 5 3 3 5 3 5 5 5 5 5 5
Operating temperature ⁰C -40/+85 -40/+85 -25/+85 -40/+85 -55/+100 -40/+85 -40/+85 -40/+85 -40/+85
Storage temperature ⁰C -40/+85 - 40/+100 -30/+100 -40/+85 -55/+100 -40/+85 -40/+85 -40/+100 -40/+100
Soldering temperature ⁰C 260 for max 5 sec 260 for max 2 sec 300 for
max 3
sec
260 for max 5 sec
Electrical-Optical Characteristics (Ta=25C)
Voltage forward Typ. V 3.8 2.1 2.1 3.8 2.0 2.1 2.0 2.1 2.0* 2.0 2.0***
Max. V 4.5 3.0 3.0 4.3 3.0 2.8 2.6 2.8 2.4* 2.4 2.4***
Current reverse (VR=5V) μA 10 10 10 50 10 22210 10 10
Wave length nm 466 563 585 NA 650 565/590 630/565 625/590 570 589 624/632
Spread Δnm 60 40 40 NA 40 35 35 35 10 NA 20
Spread angle degree 60 45 45 25 45 60 200 60 100 40 40
Luminous Intensity Min. mcd 18 9.0 5.6 630 5.6 82.2 870**** 630 400****
Typ. mcd 50 25 16 1000 16 25 4.8 25 20**** 1250 800****
Orientation The longer pin is the anode, the shorter is the cathode.
For bicolour LEDs the anode for the first colour (ex. 2080) is the longer pin.
**Pulse width 1ms Duty cycle 1:5, ***/F =50mA, **** Luminous Flux mlm
B=Blue, G=Green, Y=Yellow, R=Red, W=White
Specifications are subject to change without notice.
For product updates and/or changes of specifications please see www.mec.dk
42
multimec®
technical information spacing
Cap series Recommended
min. switch spacing AxB
Nominal cap dimension
WxH
Recommended
min. panel cut-out
1A/1H 12.7x10.16 12.6x10.1 13.0x10.5
1B/1C+2C/2D 15.24x15.24 15.1x15.1 15.5x15.5
1DS/1ES/1FS 12.7x12.7 ø9.6 ø10.0
1GAS 12.7x11.14 ø11 ø11.4
1GCS 15.14x15.14 ø15 ø15.4
1JS 12.7x12.7 ø9.6 ø10.4
1KS/1KBS/1KCS 15.24x15.24 14.3x14.3 14.7x14.7
1M 25.4x10.16 25.0x10. 25.7x10.5
1NS 12.7x12.7 ø9.8/☐4.9 ø10.2/☐5.1
1PS/1QS/1RS 15.24x10.16 6.5x12.5 7.0x13.0, R max. 1.0
1SS/1IS/1LS 12.7x12.7 ø6.5 ø7.0
1TS 12.7x12.7 10.6x10.6 11.0x11.0
1US 12.7x12.7 ø10.6 ø11.0
1VS 12.7x12.7 10.6x13.25 11.0x13.65
1WAS/1WPS 12.7x10.3 12.5x6.5 12.9x6.9
1WDS 15.34x10.3 15.2x8.0 15.6x8.4
1XS 12.7x12.7 9.4x7.4 9.8x7.9
1YS 17x17 15x15 16x16
1ZA 18.84x10.3 18.7x10.1 19.4x10.5
1ZB 24.34x12.1 R1=7.4; R2=17.5 90°R1=7.1; R 2=17.5 -17.75 90°
1ZCS 14.44x14.44 ø14.3 ø14.7
1Z/1ZW 35.5x35.5; 41.6x41.6 ø29.5 ø30.3
10R/10RF/10RM 40.5x40.5 ø30.0 ø30.6
10Q/10QM 32.5x32.5 22x22 22.5x2.5
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
Basic switch spacing
through-hole surface-mount
Recommended switch/cap spacing
Switch spacing Cap dimension
Panel cut-out
Panel Cut-out
1N 1V 1T
Spacing examples
multimec®
3AT + 1B/C + 2A/B
multimec®
3AS + 1B +2A/B
4AS +1B/1C + 2C/2D
multimec®
3AT + 1A/H
multimec®
3AT + 1M
multimec®
1N + 1N + 1N
multimec®
1V + 1T + 1V
For updates of products and/or changes of speci cations please see www.mec.dk
*A dimension with surface mount version is min. 15.24. Depending on manufacturing technology it may be necessary either to reduce pad dimension, or to increase
spacing.
In all applications the total assembly tolerance must be analysed by the user (board tolerance, front panel, assembly accuracy), to secure enough room for a free switch
movement in the  nal product. The speci cations on this page are to be considered as an aid only. MEC cannot be held responsible for the  nal assembly.
Cap series Recommended* Nominal cap dimension Recommended
min. switch spacing AxB W x H min. panel cut-out
1A 12.7 x 10.16 12.6 x 10.1 13.0 x 10.5
1B/1C+2A/2B 15.24 x 15.24 15.1 x 15.1 15.5 x 15.5
1D/1E/1F 12.7 x 12.7 ø9.6 ø10.0
1K 15.24 x 15.24 14.3 x 14.3 14.7 x 14.7
1M 25.4 x 10.16 25.0 x 10.1 25.7 x 10.5
1N 12.7 x 12.7 ø9.8/ 4.9 ø10.2/ 5.1
1P/1Q/1R 15.24 x 10.16 6.5 x 12.5 7.0 x 13.0, R Max. 1.0
1S 12.7 x 10.16 ø6.5 ø7.0
1T 12.7 x 12.7 10.6 x 10.6 11.0 x 11.0
1U 12.7 x 12.7 ø10.6 ø11.0
1V (pointing outwards) 12.7 x 12.7 10.6 x 13.25 11.0 x 13.65
1X 12.7 x 12.7 9.4 x 7.4 9.8 x 7.9
multimec® spacing
Spacing in mm
Center of switch
mec
|
www.mec.dk
34
12,7Min.
10,3
Min.
15,24Min.
10,3
Min.
12,7Min.
10,3
Min.
15,24Min.
10,3
Min.
12,7Min.
10,3
Min.
15,24Min.
10,3
Min.
12,7Min.
10,3
Min.
15,24Min.
10,3
Min.
Basic switch spacing
multimec
5GT+1B/C+2C/D
Cap dimensions
Panel cut-out
Panel cut-out
1NS 1VS 1TS
multimec
1VS + 1TS+ 1VS
multimec
1NS + 1NS + 1NS
multimec
5GT + 1A/H
multimec
5GT + 1M
multimec
5GS+1B/C+2C/D
surface mount (SMD)through-hole (TH)
Recommended switch/cap spacing
Switch spacing
Spacing examples
Part No. 9861000
For product updates and/or changes of specifications please see www.mec.dk 41
How to assemble
multimec®
5GS+1B/C+2C/D
multimec®
5GS+1A/H
multimec®
technical information
0
1
2
3
4
5
6
7
8
9
10
0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2
F(N)
L(mm)
2N
3,5N
6,5N
Operating force
(typical example)
3C/3E/5E/5G multimec®tape & reel
Part No. Ordering Code Pitch Quantity per reel
3CSH9 3CSH9R 16 500
3ESH9 3ESH9R 16 500
5ESH9XX 5ESH9XXR 16 500
5GSH9XX 5GSH9XXR 16 500
5XSH9XX1SSXX-08.0 5XSH9XXR1SSXX-08.0 20 250
5XSH9XX1SSXX-09.5 5XSH9XXR1SSXX-09.5 20 250
5XSH9XX1SSXX-10.4 5XSH9XXR1SSXX-10.4 20 250
5XSH9XX1SSXX-11.0 5XSH9XXR1SSXX-11.0 20 250
5XSH9XX1SSXX-12.0 5XSH9XXR1SSXX-12.0 20 250
All varimec h <12.5; add R after part no. 20 250
illuminated 5G multimec®tape & reel
Part No. Ordering Code Pitch Quantity per reel
5GSH9XX01 5GSH9XX01R 20 250
5GSH9XX22 5GSH9XX22R 20 250
5GSH9XX42 5GSH9XX42R 20 250
5GSH9XX61 5GSH9XX61R 20 250
5GSH9XX82 5GSH9XX82R 20 250
5GSH9XX2242 5GSH9XX2242R 20 250
5GSH9XX8222 5GSH9XX8222R 20 250
5GSH9XX8242 5GSH9XX8242R 20 250
Tape & Reel
Tape and reel is available for the parts
listed and has the following specifications:
Reel diameter: Ø330mm
Tape width: 24mm
Pitch: see list
Tape and reel material: antistatic or
better
Quantity per reel: see list
1. 2.
3. 4.
5.
2N
3,5N
6,5N
Mounting tool for multimec® through-
hole switches
travel
force
Legends
Avaliable for Multimec caps
34
Ordering example: 1FS096R12309; 1ZB09D13606; 1ZCS16LMH11809
Please see colour codes, updates of products and changes of specifications on www.mec.dk
LEGEND 1B09U_
1B09D_
1DS09_ 1FS096R_ 1ZB09D_
1ZB16DLMH_
1ZCS_ 10R_ & 10RF_
10RM16_
10Q_
10QM16_
0000 000 000
1001 001 001
2002 002 002
3003 003 003
4004 004 004
5005 005 005
6006 006 006
7007 007 007
8008 008 008
9009 009 009
#107 107
019 019
033
133
034
134
1 2 3
4 5 6
7 8 9
0 .
ESC
H/V
H/V
1 2 3
4 5 6
7 8 9
0 .
ESC
1 2 3
4 5 6
7 8 9
0 .
ESC
1 2 3
4 5 6
7 8 9
0 .
ESC
H/V
1 2 3
4 5 6
7 8 9
0 .
ESC
CLR CLR
135 135
+054 054
-059 059
136*
123 123 123* 123 123
ON/OFF 017 017
STOP 018 018
START 031 031
RESET 038 038 038
CANCEL 048 048
ENTER 105 105 105
ESC 051
OK 118* 118 118
SET 119
MENU 120
FUNC 121
HOME 122
STANDARD
OPTIONS
1B
pad printed
1DS
pad printed
1FS
reverse printed
1ZB
pad printed
*laser marked
1ZCS
pad printed
*reverse printed
*laser marked
10R(F) & 10Q
pad printed
reverse printed
10RM & 10QM
metal symbol
standard legends
Legends
Avaliable for Multimec caps
35
POSITIONING OF LEGENDS ON ROCKER-ACTION CAPS
When ordering legends for caps with hinge-type cap retention system, it is important
to note the position of the cap. An extra letter (U or D) needs to be added to the part
number to refer to the position of the hinges in relation to the legend. See samples
to the left.
Rocker-action caps without a lens: 1A, 1B, 1M, 1ZA and 1ZB
Orientation of the switch:
ON/OFF
ON/OFF
ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
ON/OFF
ON/OFF
ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
UP
1A09U01706
UP
1B09U01706
DOWN
1A09D01706
DOWN
1B09D01706
ON/OFF
ON/OFF ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
NOTE:
■ The size of the legends listed may not correspond to the actual size.
■ If you decide to use one of the standard legends without any adjustments (without a new cliché) on another cap than designated in the table, then
there is no start-up cost, for this to apply the cap has to be black and the print white.
■ Standard legend colours are white paint on a black cap and black paint on a frosted white cap. Other colour combinations are handled as custom.
■ For further information on legends please contact your local distributor or MEC.
ON/OFF
ON/OFF ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
DOWN
1ZB09D13606
ON/OFF
ON/OFF ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
UP DOW N
ON/OFF
ON/OFF ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
ON/OFF
ON/OFF ON/OFF
ON/OFF
3
1
4
2
-
+
+
-
3
12
4
Ordering example: 1ZW0913611806; 1B06U13508; 10R16R10509
Please see colour codes, updates of products and changes of specifications on www.mec.dk
STANDARD LEGENDS
■ Standard are only certain legends on certain caps. See the table on the previous page.
■ All standard pad-printed legends are white on black caps.
■ All standard reverse-printed and laser marked legends are black on frosted white cap.
STANDARD AND CUSTOM LEGENDS - HOW TO ORDER
Direction*
D down
U up
*only for
hinge-type
caps
Cap
1B
1DS
... etc
Cap colour
00 blue
02 green
03 grey
04 yellow
06 white
08 red
09 black
16 frosted white
... etc
Type*
LM laser marked on soft paint
LMH laser marked on hard paint
R reverse printed
*in case of illumination
Legend
001 1
002 2
003 3
... etc
Legend colour*
00 blue
02 green
03 grey
04 yellow
06 white
08 red
09 black
... etc
*in case of laser marked
legends the colour of the
soft or hard paint
PLEASE FIND THE FULL LIST OF AVAILABLE LEGENDS ON MEC WEBSITE www.mec.dk
LEGEND ILLUMINATION
Option 1:LASER MARKED
In case of laser marked legends an “LM” is added after the cap colour, before the legend code. We recommend using hard paint (additional “H” ) for
increased lifetime of the paint. E.g. 1ZB16DLMH13609
Option 2: REVERSE PRINTED
In case of reverse printed caps an “R” is added after the cap colour, before the legend code. Especially relevant when standard legends has both negative
and positive print option. E.g. 1FS096R00009
Option 3: METAL SYMBOL
Only available for 10RM and 10QM (therefore the “M”). E.g. 10RM16059
how to order
The RAL Codes mentioned are the codes nearest to the solid colors in the multimec® range.
multimec®
Solid colours
CAP CODE 00 02 03 04 06 08 09 30 32 33 34 38 40 42 50 53 57 58
1A • • • • • • •
1B • • • • • • •
1C • • •
1DS • • • • • • • • • • • • • • • • • •
1ES/1FS • • • • • • •
1GAS/1GCS • • • • • • •
1H • •
1JS • • • • • • •
1KS • • • • • • •
1M • • • • • • •
1NS • •
1PS • • • • • • •
1QS/1RS • • •
1SS/1LS • • • • • • •
1TS/1US/1VS • • • •
1WAS/1WDS/1WPS • • • • • • • • •
1XS • • • • • • •
1ZA • • • • • • • • • •
1ZB • • • • • • • • • •
1ZCS • • • • • • • • • • •
1Z/1ZW • • • • •
10R/10RF + 10Q
14
0,3
11,0
7,62
0,8
14
0,3
11,0
7,62
0,8
30,0 22
5,1
5,1
• • • • • • •
No.
Colour
RAL Code
00
blue
5012
02
green
6018
03
grey
7004
04
yellow
1023
06
white
9010
08
red
3000
09
black
9004
No.
Colour
RAL Code
30
ultra blue
5002
32
mint green
6029
33
tele grey
7046
34
melon
1028
38
noble red
3002
40
dusty blue
5014
42
aqua blue
5021
No.
Colour
RAL Code
50
dark blue
No Ral Code
53
light grey
No Ral Code
57
dark grey
No Ral Code
58
bordeaux
No Ral Code
Metallic Colours
For product updates and/or changes of specifications please see www.mec.dk
58
How to get the best results with MEC Switches?
These guidelines are offered to users of MEC Switches as an aid to
ensure successful and reliable switch operation.
Temperature
Both unimec™ and multimec® switches are produced in low and high
temperature versions. Please see the technical specifications for de-
tails on operating and storage temperatures and soldering guidelines
to make sure you select the best switch for your application. When
wave soldering is taking place, MEC strongly recommend that the
temperature profile is analysed and compared with the temperature
rating of the switch. In case of doubt always select the high tem-
perature versions unimec™ 154XX, and multimec® 5XXH9XX. It is also
important to monitor the accumulated heat build up from both the
pre-heat zones and the solder zone.
Most standard accessories for both unimec™ and multimec® switches
are made from ABS plastic with a maximum operating temperature of
65°C. It is strongly recommended that accessories are mounted after
soldering of the switch. If this is not possible care must be taken not
to overheat the accessories during the soldering process. The 1SS,
1GAS/1GCS and Varimec™ caps are, however, made of high tempera-
ture materials and will meet the same temperature specifications as
the high temperature switches.
For accessories made from other plastic materials please see multi-
mec® and unimec™ technical specifications.
LEDs have their own temperature specifications. When fitted in a high
temperature switch the LED will determine the max. operating tem-
perature, i.e. 5GTH93524 has an upper temperature limit of 85°C!
This also applies with 3F switches.
Mounting and Dismounting
If switches are to be mounted in rows it is essential that the recom-
mendations regarding spacing are followed. PC board thickness
should be 1.4±0.2 mm and terminal hole diameter should be 0.9mm.
All unimec™ and multimec® caps and bezels are easily snapped onto
the switch modules and can be changed at a later time with the excep-
tion of the unimec 16.700 cap. The same applies to the 3E caps. Once
these caps are installed they are not designed to be removed. To do
so may cause damage to the switch and the PC board if not done
very carefully. If the 16.300 or 16.700 cap must be removed from a
unimec™ alternate action switch, make sure that the switch actuator is
in the released, upper position before attempting to remove the cap.
This will prevent possible damage to the internal latching pin.
Care must be taken when inserting the 3FT switch and LED assembly
into the PC board. Do not press direct on the LED. This will force the
LED down into the actuator and risks to cause the switch contacts to
remain in the closed position. To correct the fault, the LED must be
raised slightly and centered in the actuator to assure unrestricted
movement of the actuator. A mounting tool is available for multimec®
switches.
Soldering and Cleaning unimec™
Most assembly and field problems experienced by users of unsealed
switches are caused by the contamination of the contacts during
soldering and cleaning.
Contact contamination may be recognised by an increase in contact
resistance and possible intermittent operation of the switch, espe-
cially in low power applications. Care must be taken not to submerge
the switch in cleaning agents or spray the switch during cleaning. The
switch must be protected at all times to prevent contamination by flux
or cleaning liquids.
For unimec™ alternate versions we recommend to leave the actua-
tor in the released upper position during soldering. This makes the
switch more resistent to overheating.
Soldering and Cleaning multimec®
multimec® switches are fully sealed to IP67 specifications to prevent
solder flux and aqueous based cleaning solutions from entering the
switch and contaminating the contacts. The switches can be placed on
the PC board with other components and wave soldered. multimec®
offers a high level of sealing, however, with aqueous solvent solu-
tions care must be taken to avoid the worst case situation with water
jets, complete immersion into a liquid with a temperature below the
board or surface tension reducing additives.
Recommended cleaning methods are demineralized water. Any sur-
face tension reducing agents, such as soap, must not be used as they
risk causing a potential leakage of the switch.
Soldering - Through Hole Versions
Hand soldering: Max. 350°C for max. 3 sec., this applies for both low
temperature and high temperature versions.
Wave soldering: heat built up in the switch during pre-heating and
soldering must not exceed the maximum operating temperature of
the switch. If, for some reason, a high pre-heating temperature is
required, MEC recommend the high temperature switches. In any
case peak temperature must not exceed 260°C, and soldering time
is max 10 sec.
Soldering - Surface Mount Versions
For all methods - infrared, convection and vapour phase. The upper
limit 260°C/30 sec must be observed. The soldering temperature
profile must have moderate temperature gradients.
RoHS Compliance
As of 1 July 2006 MEC has completed the conversion to RoHS compli-
ance. For more info please see our homepage www.mec.dk
Temperature Limits:
Low temperature switch 115°C
High temperature switch 160°C
LEDs 85/100°C
Accessories 65/85/160°C
Packaging
unimec™ and multimec® switches are packed in rigid tubes of 50
pieces each.
A box contains 1.000 pcs.
The surface mount versions of multimec®switches with a height up
to 12.5mm can also be delivered on tape/reel. Each reel contains
250/500 pcs.
Usage guidelines
59