SFH6135, SFH6136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Transistor Output FEATURES NC 1 8 C (VCC) * Isolation test voltage 5300 VRMS A 2 7 B (VB) * TTL compatible C 3 6 C (VO) * High bit rates: 1 MBit/s NC 4 5 E (GND) * High common mode interference immunity * Bandwidth 2 MHz i179081_3 V D E i179075 * Open collector output * External base wiring possible DESCRIPTION * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC The SFH6135 and SFH6136 optocouplers feature a high signal transmission rate and a high isolation resistance. They have a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. AGENCY APPROVALS * UL1577, file no. E52744 system code H or J, double protection * CSA 93751 * DIN EN 60747-5-5 (VDE 0884) ORDERING INFORMATION S F H 6 1 3 PART NUMBER # - X 0 # PACKAGE OPTION # DIP-8 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 Option 8 Option 9 9.27 mm > 0.1 mm > 0.7 mm AGENCY CERTIFIED/PACKAGE CTR (%) 7 UL DIP-8 DIP-8, 400 mil, option 6 19 SFH6135 SFH6136 SFH6135-X006 SFH6136-X006 SMD-8, option 7 SFH6135-X007T (1) SFH6136-X007 SMD-8, option 9 - SFH6136-X009T VDE, UL DIP-8 7 19 SFH6135-X001 SFH6136-X001 DIP-8, 400 mil, option 6 - SFH6136-X016 SMD-8, option 7 - SFH6136-X017T (1) SMD-8, option 8 - SFH6136-X018 SMD-8, option 9 SFH6135-X019 SFH6136-X019T (1) Note (1) Also available in tubes; do not add T to end Document Number: 83668 Rev. 1.6, 19-Oct-10 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 SFH6135, SFH6136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Transistor Output ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 3 V Forward current IF 25 mA IFM 50 mA Peak forward current t = 1 ms, duty cycle 50 % Maximum surge forward current t 1 s, 300 pulses/s IFSM 1 A Thermal resistance Rthja 700 K/W Power dissipation Pdiss 45 mW Supply voltage VS - 0.5 to 30 V Output voltage VO - 0.5 to 25 V VEBO 5 V Output current IO 8 mA Maximum output current IO 16 mA Base current IB 5 mA OUTPUT Emitter base voltage Thermal resistance Power dissipation Tamb = 70 C Rthja 300 K/W Pdiss 100 mW VISO 5300 VRMS COUPLER Isolation test voltage Pollution degree (DIN VDE 0110) 2 VIO = 500 V, Tamb = 25 C Isolation resistance VIO = 500 V, Tamb = 100 C Storage temperature range Ambient temperature range Soldering temperature (1) max. 10 s, dip soldering 0.5 mm distance from case bottom RIO 1012 RIO 1011 Tstg - 55 to + 125 C Tamb - 55 to + 100 C Tsld 260 C Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to wave profile for soldering conditions for through hole devices . ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1.6 1.9 V 10 A INPUT Forward voltage IF = 16 mA VF Breakdown voltage IR = 10 A VBR VR = 3 V IR 0.5 VR = 0 V, f = 1 MHz CO 125 pF IF = 16 mA VF/Tamb 1.7 mV/C Reverse current Capacitance Temperature coefficient of forward voltage 3 V OUTPUT Logic low supply current IF = 16 mA, VO = open, VCC = 15 V ICCL 150 Logic high supply current IF = 0 V, VO = open, VCC = 15 V ICCH 0.01 1 A IF = 16 mA, VCC = 4.5 V, IO = 1.1 mA SFH6135 VOL 0.1 0.4 V IF = 16 mA, VCC = 4.5 V, IO = 2.4 mA SFH6136 VOL 0.1 0.4 V IF = 0 mA, VO = VCC = 5.5 V IOH 3 500 nA IF = 0 mA, VO = VCC =15 V IOH 0.01 1 A Output voltage, output low Output current, output high www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com A Document Number: 83668 Rev. 1.6, 19-Oct-10 SFH6135, SFH6136 High Speed Optocoupler, 1 MBd, Transistor Output Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT COUPLER Capacitance (input to output) f = 1 MHz CIO 0.6 pF Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART IF = 16 mA, VO = 0.4 V, VCC = 4.5 V Current transfer ratio IF = 16 mA, VO = 0.5 V, VCC = 4.5 V SYMBOL MIN. TYP. MAX. UNIT SFH6135 CTR 7 16 % SFH6136 CTR 19 35 % SFH6135 CTR 5 % SFH6136 CTR 15 % Pulse generator IF ZO = 50 t r , t f = 5 ns duty cycle 10 % t 100 s t 5V 1 8 2 7 3 6 VO 4 5 CL 15 pF VO IF IF monitor 5V RL 1.5 V VOL t 100 tPHL tPLH isfh6135_01 Fig. 1 - Schematics SWITCHING CHARACTERISTICS PARAMETER High to low Low to high TEST CONDITION PART SYMBOL TYP. MAX. UNIT IF = 16 mA, VCC = 5 V, RL = 4.1 k SFH6135 tPHL MIN. 0.3 1.5 s IF = 16 mA, VCC = 5 V, RL = 1.9 k SFH6136 tPHL 0.2 0.8 s IF = 16 mA, VCC = 5 V, RL = 4.1 k SFH6135 tPLH 0.3 1.5 s IF = 16 mA, VCC = 5 V, RL = 1.9 k SFH6136 tPLH 0.2 0.8 s VCM 10 V IF A B 1 8 2 7 3 6 4 5 VFF 90 % 10 % 5V 0V RL VO VO 10 % 90 % t tr tf 5V A: IF = 0 mA +VCM Pulse generator Z O = 50 t r , t f = 8 ns VO VOL isfh6135_02 t B: IF = 16 mA t Fig. 2 - Common Mode Interference Immunity Document Number: 83668 Rev. 1.6, 19-Oct-10 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 SFH6135, SFH6136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Transistor Output COMMON MODE TRANSIENT IMMUNITY PARAMETER High Low TEST CONDITION PART SYMBOL VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 4.1 k MIN. TYP. MAX. UNIT SFH6135 CMH 1000 V/s VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 1.9 k SFH6136 CMH 1000 V/s VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 4.1 k SFH6135 CML 1000 V/s VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 1.9 k SFH6136 CML 1000 V/s SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX. UNIT 55/100/21 Comparative tracking index CTI 175 VIOTM 8000 VIORM 890 399 V V PSO 500 mW ISI 300 mA TSI 175 C Creepage distance Standard DIP-8 7 mm Clearance distance Standard DIP-8 7 mm Creepage distance 400 mil DIP-8 8 mm Clearance distance 400 mil DIP-8 8 mm Note * As per IEC 60747-5-5, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 30 IF - LED Current (mA) IF - LED Current (mA) 20 15 75 C 10 25 C 0 C 5 0 20 10 0 1.3 isfh6135_03 1.4 1.5 1.6 1.7 VF - LED Forward Voltage (V) Fig. 3 - LED Forward Current vs. Forward Voltage www.vishay.com 4 0 isfh6135_04 20 40 60 80 100 Ambient Temperature (C) Fig. 4 - Permissible Forward LED Current vs. Temperature For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83668 Rev. 1.6, 19-Oct-10 SFH6135, SFH6136 High Speed Optocoupler, 1 MBd, Transistor Output Total Power (mW) 100 Detector 80 60 40 Emitter 20 0 0 isfh6135_05 20 40 60 80 700 TPLH at 3 V 600 TPLH at 1.5 V 500 400 TPHL at 1.5 V 300 200 TPHL at 3 V 100 0 - 60 - 40 - 20 isfh6135_08 Ambient Temperature (C) 0 20 40 60 80 100 TA - Temperature (C) Fig. 8 - Propagation Delay vs. Ambient Temperature - SFH6136 25 1400 tp-Propagation Delay Time (ns) IO - Output Current (mA) SFH6136 at VCC = 5.0 V IF = 16 mA, RL = 1.9 kW 800 100 Fig. 5 - Permissible Power Dissipation vs. Temperature IF = 40 mA VCC = 5.0 V 1200 20 IF = 35 mA IF = 30 mA IF = 25 mA IF = 20 mA 15 IF = 15 mA 10 IF = 10 mA 5 isfh6135_06 5 10 15 20 25 400 tPHL 200 0 20 40 60 80 100 Fig. 9 - Propagation Delay vs. Ambient Temperature - SFH6135 100 at VO = 0.4 V, 7 VCC = 5.0 V IOH - Collector Current, IC (nA) 8 IF = 20 mA IF = 16 mA 6 IF = 10 mA 5 4 IF = 2 mA 3 2 IF = 1 mA 1 VCC = VO = 15 V 10 1 VCC = VO = 5 V 0.1 0.01 0.001 0 20 40 60 - 60 - 40 - 20 0 80 100 TA - Temperature (C) Fig. 7 - Output Current vs. Temperature Document Number: 83668 Rev. 1.6, 19-Oct-10 tPLH isfh6135_09 Fig. 6 - Output Current vs. Output Voltage isfh6135_07 600 TA - Temperature (C) VO - Output Voltage (V) 0 - 60 - 40 - 20 800 0 - 60 - 40 - 20 0 0 SFH163 at VCC = 5. 0 V IF = 16 mA, RL = 4.1 k 1000 IF = 5 mA IO - Output Current (mA) 900 tp - Propagation Delay Time (ns) 120 Vishay Semiconductors isfh6135_10 20 40 60 80 100 TA - Temperature (C) Fig. 10 - Logic High Output Current vs. Temperature For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 SFH6135, SFH6136 High Speed Optocoupler, 1 MBd, Transistor Output Vishay Semiconductors IF/IO/Small Signal Current Transfer Ratio 0.6 (VCC = 5.0 V, RL = 100 ) 0.5 0.4 0.3 0.2 0.1 0 0 isfh6135_11 5 10 15 20 25 IF (mA) Fig. 11 - Small Signal Current Transfer Ratio vs. Quiescent Input Current PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 0.70 0.19 0.51 0.05 3.045 0.255 3 to 9 2.54 typ. i178006 www.vishay.com 6 0.25 0.05 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83668 Rev. 1.6, 19-Oct-10 SFH6135, SFH6136 High Speed Optocoupler, 1 MBd, Transistor Output Vishay Semiconductors Option 6 Option 7 Option 8 Option 9 7.62 typ. 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 3.5 0.3 0.35 0.25 4.3 0.3 0.25 0.1 3.5 0.3 0.1 0.1 3.6 0.3 0.1 min. 9.27 min. 0.6 min. 8 min. 2.55 0.25 10.3 max. 0.6 min. 12.1 max. 8.16 0.8 2.54 R 0.25 0.76 R 0.25 0.76 2.54 0.76 2.54 10.16 typ. R 0.25 1.52 9.95 min. 13.0 1.52 7.7 11.05 1.78 11.05 1.78 8 min. 1.52 1.78 20802-1 PACKAGE MARKING SFH6135 V YWW H 68 21764-66 Document Number: 83668 Rev. 1.6, 19-Oct-10 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 7 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SFH6135 SFH6136 SFH6135-X001 SFH6135-X006 SFH6135-X007 SFH6135-X007T SFH6135-X019 SFH6136X001 SFH6136-X006 SFH6136-X007 SFH6136-X009T SFH6136-X016 SFH6136-X017 SFH6136-X017T SFH6136-X019 SFH6136-X019T SFH6136-X018