US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Chip Inductors
–
0402AF Series (1005)
Document 422-1
Document 422-1 Revised 12/17/12
Inductance2 Impedance typ (Ohms) SRF typ3 DCR max4 Irms5
Part number1 ±5% (nH) 900 MHz 1.7 GHz (MHz) (Ohms) (mA)
0402AF-200XJL_ 20 83 118 2600 0.050 1600
0402AF-220XJL_ 22 96 146 2500 0.065 1300
0402AF-330XJL_ 33 142 207 2300 0.060 1400
0402AF-360XJL_ 36 157 249 2300 0.075 1300
0402AF-390XJL_ 39 173 263 2200 0.115 830
0402AF-510XJL_ 51 218 330 1930 0.070 1100
0402AF-560XJL_ 56 239 360 1900 0.095 1000
0402AF-720XJL_ 72 311 453 1650 0.100 1000
0402AF-780XJL_ 78 344 522 1600 0.130 970
0402AF-101XJL_ 100 513 850 1400 0.160 900
0402AF-141XJL_ 140 629 949 1220 0.260 630
0402AF-181XJL_ 180 832 1270 1150 0.280 560
0402AF-201XJL_ 200 1110 1890 1000 0.440 400
0402AF-221XJL_ 220 1050 1560 1150 0.530 380
0402AF-251XJL_ 250 1230 1940 900 0.360 520
0402AF-271XJL_ 270 1320 1960 860 0.550 360
0402AF-301XJL_ 300 1550 2230 860 0.410 420
0402AF-331XJL_ 330 1850 2880 820 0.560 350
0402AF-361XJL_ 360 1920 2640 810 0.575 360
0402AF-391XJL_ 390 2350 2970 760 0.750 300
0402AF-421XJL_ 420 2270 2800 700 0.700 340
0402AF-471XJL_ 470 2680 3010 650 0.730 310
0402AF-561XJL_ 560 3620 3110 600 0.920 200
1. When ordering, please specify termination and packaging codes:
0402AF-561XJLW
Termination: L = RoHS compliant gold over nickel over silver-palladi-
um-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q = 7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP
4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and
Coilcraft-provided correlation pieces.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD -D test fixture.
4. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
5. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
•Higherinductancevaluesthanother0402inductors
•Ferriteconstructionforhighcurrenthandling
•23inductancevaluesfrom20nHto560nH
Designer’s Kit C397 contains 20 each of all values
Core material Ferrite
Terminations RoHS compliant gold over nickel over silver-palladium-
glass frit. Other terminations available at additional cost.
Weight 0.9 – 1.1 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 or 5000 per 7″ reel. Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Chip Inductors – 0402AF Series
Document 422-2
20 nH
56 nH
100 nH
270 nH
560 nH
1
10
1000
100
0.001 0.01
11
00.1
Inductance (nH)
Frequency (GHz)
Typical L vs Frequency
20 nH
56 nH
100 nH
270 nH
560 nH
16
14
12
10
8
6
4
2
0
110 100
Q Factor
Frequency (MHz)
Typical Q vs Frequency
-40 -20 020406080100 120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Irms Derating
Document 422-2 Revised 12/17/12
Typical Impedance vs Frequency
20 nH
56 nH
100 nH
270 nH
560 nH
0.1
10
1
10000
1000
100
0.001 0.01
11
00.1
Impedance (Ohms)
Frequency (GHz)
A
B
overall
EF
F
D
terminal
E
H
C
G
Terminal wraparound:
approx 0.007/0,18 both ends
Pick and
place
material
Recommended
Land Pattern
A max B max C max D E F G H
0.044 0.026 0.026 0.020 0.009 0.017 0.018 0.026 inches
1,12 0,66 0,66 0,51 0,23 0,43 0,46 0,66 mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.